Merge branch 'i2c/for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux

Pull i2c updates from Wolfram Sang:
 "This pull request contains:

   - i2c core reorganization. One source file became too monolithic. It
     is now split up, yet we still have the same named object as the
     final output. This should ease maintenance.

   - new drivers: ZTE ZX2967 family, ASPEED 24XX/25XX

   - designware driver gained slave mode support

   - xgene-slimpro driver gained ACPI support

   - bigger overhaul for pca-platform driver

   - the algo-bit module now supports messages with enforced STOP

   - slightly bigger than usual set of driver updates and improvements

  and with much appreciated quality assurance from Andy Shevchenko"

* 'i2c/for-4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (51 commits)
  i2c: Provide a stub for i2c_detect_slave_mode()
  i2c: designware: Let slave adapter support be optional
  i2c: designware: Make HW init functions static
  i2c: designware: fix spelling mistakes
  i2c: pca-platform: propagate error from i2c_pca_add_numbered_bus
  i2c: pca-platform: correctly set algo_data.reset_chip
  i2c: acpi: Do not create i2c-clients for LNXVIDEO ACPI devices
  i2c: designware: enable SLAVE in platform module
  i2c: designware: add SLAVE mode functions
  i2c: zx2967: drop COMPILE_TEST dependency
  i2c: zx2967: always use the same device when printing errors
  i2c: pca-platform: use dev_warn/dev_info instead of printk
  i2c: pca-platform: use device managed allocations
  i2c: pca-platform: add devicetree awareness
  i2c: pca-platform: switch to struct gpio_desc
  dt-bindings: add bindings for i2c-pca-platform
  i2c: cadance: fix ctrl/addr reg write order
  i2c: zx2967: add i2c controller driver for ZTE's zx2967 family
  dt: bindings: add documentation for zx2967 family i2c controller
  i2c: algo-bit: add support for I2C_M_STOP
  ...

41 files changed, 4944 insertions, 2483 deletions

diff --git a/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
new file mode 100644
index 000000000000..bd6480b19535
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
@@ -0,0 +1,48 @@
+Device tree configuration for the I2C busses on the AST24XX and AST25XX SoCs.
+
+Required Properties:
+- #address-cells	: should be 1
+- #size-cells		: should be 0
+- reg			: address offset and range of bus
+- compatible		: should be "aspeed,ast2400-i2c-bus"
+			  or "aspeed,ast2500-i2c-bus"
+- clocks		: root clock of bus, should reference the APB
+			  clock
+- interrupts		: interrupt number
+- interrupt-parent	: interrupt controller for bus, should reference a
+			  aspeed,ast2400-i2c-ic or aspeed,ast2500-i2c-ic
+			  interrupt controller
+
+Optional Properties:
+- bus-frequency	: frequency of the bus clock in Hz defaults to 100 kHz when not
+		  specified
+- multi-master	: states that there is another master active on this bus.
+
+Example:
+
+i2c {
+	compatible = "simple-bus";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges = <0 0x1e78a000 0x1000>;
+
+	i2c_ic: interrupt-controller@0 {
+		#interrupt-cells = <1>;
+		compatible = "aspeed,ast2400-i2c-ic";
+		reg = <0x0 0x40>;
+		interrupts = <12>;
+		interrupt-controller;
+	};
+
+	i2c0: i2c-bus@40 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		#interrupt-cells = <1>;
+		reg = <0x40 0x40>;
+		compatible = "aspeed,ast2400-i2c-bus";
+		clocks = <&clk_apb>;
+		bus-frequency = <100000>;
+		interrupts = <0>;
+		interrupt-parent = <&i2c_ic>;
+	};
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-designware.txt b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
index fee26dc3e858..fbb0a6d8b964 100644
--- a/Documentation/devicetree/bindings/i2c/i2c-designware.txt
+++ b/Documentation/devicetree/bindings/i2c/i2c-designware.txt
@@ -20,7 +20,7 @@ Optional properties :
  - i2c-sda-falling-time-ns : should contain the SDA falling time in nanoseconds.
    This value which is by default 300ns is used to compute the tHIGH period.
 
-Example :
+Examples :
 
 	i2c@f0000 {
 		#address-cells = <1>;
@@ -43,3 +43,17 @@ Example :
 		i2c-sda-falling-time-ns = <300>;
 		i2c-scl-falling-time-ns = <300>;
 	};
+
+	i2c@1120000 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x2000 0x100>;
+		clock-frequency = <400000>;
+		clocks = <&i2cclk>;
+		interrupts = <0>;
+
+		eeprom@64 {
+			compatible = "linux,slave-24c02";
+			reg = <0x40000064>;
+		};
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt b/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt
new file mode 100644
index 000000000000..f1f3876bb8e8
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-pca-platform.txt
@@ -0,0 +1,29 @@
+* NXP PCA PCA9564/PCA9665 I2C controller
+
+The PCA9564/PCA9665 serves as an interface between most standard
+parallel-bus microcontrollers/microprocessors and the serial I2C-bus
+and allows the parallel bus system to communicate bi-directionally
+with the I2C-bus.
+
+Required properties :
+
+ - reg : Offset and length of the register set for the device
+ - compatible : one of "nxp,pca9564" or "nxp,pca9665"
+
+Optional properties
+ - interrupts : the interrupt number
+ - interrupt-parent : the phandle for the interrupt controller.
+   If an interrupt is not specified polling will be used.
+ - reset-gpios : gpio specifier for gpio connected to RESET_N pin. As the line
+   is active low, it should be marked GPIO_ACTIVE_LOW.
+ - clock-frequency : I2C bus frequency.
+
+Example:
+	i2c0: i2c@80000 {
+		compatible = "nxp,pca9564";
+		#address-cells = <1>;
+		#size-cells = <0>;
+		reg = <0x80000 0x4>;
+		reset-gpios = <&gpio1 0 GPIO_ACTIVE_LOW>;
+		clock-frequency = <100000>;
+	};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
new file mode 100644
index 000000000000..cb806d1ae4c9
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-zx2967.txt
@@ -0,0 +1,22 @@
+ZTE zx2967 I2C controller
+
+Required properties:
+ - compatible: must be "zte,zx296718-i2c"
+ - reg: physical address and length of the device registers
+ - interrupts: a single interrupt specifier
+ - clocks: clock for the device
+ - #address-cells: should be <1>
+ - #size-cells: should be <0>
+ - clock-frequency: the desired I2C bus clock frequency.
+
+Examples:
+
+	i2c@112000 {
+		compatible = "zte,zx296718-i2c";
+		reg = <0x00112000 0x1000>;
+		interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&osc24m>;
+		#address-cells = <1>
+		#size-cells = <0>;
+		clock-frequency = <1600000>;
+	};
diff --git a/Documentation/driver-api/i2c.rst b/Documentation/driver-api/i2c.rst
index 0bf86a445d01..7582c079d747 100644
--- a/Documentation/driver-api/i2c.rst
+++ b/Documentation/driver-api/i2c.rst
@@ -41,5 +41,8 @@ i2c_adapter devices which don't support those I2C operations.
 .. kernel-doc:: drivers/i2c/i2c-boardinfo.c
    :functions: i2c_register_board_info
 
-.. kernel-doc:: drivers/i2c/i2c-core.c
+.. kernel-doc:: drivers/i2c/i2c-core-base.c
+   :export:
+
+.. kernel-doc:: drivers/i2c/i2c-core-smbus.c
    :export:
diff --git a/Documentation/i2c/busses/i2c-i801 b/Documentation/i2c/busses/i2c-i801
index 820d9040de16..0500193434cb 100644
--- a/Documentation/i2c/busses/i2c-i801
+++ b/Documentation/i2c/busses/i2c-i801
@@ -34,6 +34,8 @@ Supported adapters:
   * Intel Broxton (SOC)
   * Intel Lewisburg (PCH)
   * Intel Gemini Lake (SOC)
+  * Intel Cannon Lake-H (PCH)
+  * Intel Cannon Lake-LP (PCH)
    Datasheets: Publicly available at the Intel website
 
 On Intel Patsburg and later chipsets, both the normal host SMBus controller
diff --git a/Documentation/i2c/dev-interface b/Documentation/i2c/dev-interface
index bcf919d8625c..5ff19447ac44 100644
--- a/Documentation/i2c/dev-interface
+++ b/Documentation/i2c/dev-interface
@@ -191,7 +191,7 @@ checking on future transactions.)
 4* Other ioctl() calls are converted to in-kernel function calls by
 i2c-dev. Examples include I2C_FUNCS, which queries the I2C adapter
 functionality using i2c.h:i2c_get_functionality(), and I2C_SMBUS, which
-performs an SMBus transaction using i2c-core.c:i2c_smbus_xfer().
+performs an SMBus transaction using i2c-core-smbus.c:i2c_smbus_xfer().
 
 The i2c-dev driver is responsible for checking all the parameters that
 come from user-space for validity. After this point, there is no
@@ -200,13 +200,13 @@ and calls that would have been performed by kernel I2C chip drivers
 directly. This means that I2C bus drivers don't need to implement
 anything special to support access from user-space.
 
-5* These i2c-core.c/i2c.h functions are wrappers to the actual
-implementation of your I2C bus driver. Each adapter must declare
-callback functions implementing these standard calls.
-i2c.h:i2c_get_functionality() calls i2c_adapter.algo->functionality(),
-while i2c-core.c:i2c_smbus_xfer() calls either
+5* These i2c.h functions are wrappers to the actual implementation of
+your I2C bus driver. Each adapter must declare callback functions
+implementing these standard calls. i2c.h:i2c_get_functionality() calls
+i2c_adapter.algo->functionality(), while
+i2c-core-smbus.c:i2c_smbus_xfer() calls either
 adapter.algo->smbus_xfer() if it is implemented, or if not,
-i2c-core.c:i2c_smbus_xfer_emulated() which in turn calls
+i2c-core-smbus.c:i2c_smbus_xfer_emulated() which in turn calls
 i2c_adapter.algo->master_xfer().
 
 After your I2C bus driver has processed these requests, execution runs
diff --git a/MAINTAINERS b/MAINTAINERS
index f6ec1be48609..1347726cf9d5 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1139,6 +1139,18 @@ F:	arch/arm/mach-aspeed/
 F:	arch/arm/boot/dts/aspeed-*
 F:	drivers/*/*aspeed*
 
+ARM/ASPEED I2C DRIVER
+M:	Brendan Higgins <brendanhiggins@google.com>
+R:	Benjamin Herrenschmidt <benh@kernel.crashing.org>
+R:	Joel Stanley <joel@jms.id.au>
+L:	linux-i2c@vger.kernel.org
+L:	openbmc@lists.ozlabs.org
+S:	Maintained
+F:	drivers/irqchip/irq-aspeed-i2c-ic.c
+F:	drivers/i2c/busses/i2c-aspeed.c
+F:	Documentation/devicetree/bindings/interrupt-controller/aspeed,ast2400-i2c-ic.txt
+F:	Documentation/devicetree/bindings/i2c/i2c-aspeed.txt
+
 ARM/ATMEL AT91RM9200, AT91SAM9 AND SAMA5 SOC SUPPORT
 M:	Nicolas Ferre <nicolas.ferre@microchip.com>
 M:	Alexandre Belloni <alexandre.belloni@free-electrons.com>
@@ -6382,6 +6394,7 @@ M:	Mika Westerberg <mika.westerberg@linux.intel.com>
 L:	linux-i2c@vger.kernel.org
 L:	linux-acpi@vger.kernel.org
 S:	Maintained
+F:	drivers/i2c/i2c-core-acpi.c
 
 I2C-TAOS-EVM DRIVER
 M:	Jean Delvare <jdelvare@suse.com>
diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
index 45095b3d16a9..7bb65a4369e1 100644
--- a/drivers/i2c/Makefile
+++ b/drivers/i2c/Makefile
@@ -4,6 +4,11 @@
 
 obj-$(CONFIG_I2C_BOARDINFO)	+= i2c-boardinfo.o
 obj-$(CONFIG_I2C)		+= i2c-core.o
+i2c-core-objs 			:= i2c-core-base.o i2c-core-smbus.o
+i2c-core-$(CONFIG_ACPI)		+= i2c-core-acpi.o
+i2c-core-$(CONFIG_I2C_SLAVE) 	+= i2c-core-slave.o
+i2c-core-$(CONFIG_OF) 		+= i2c-core-of.o
+
 obj-$(CONFIG_I2C_SMBUS)		+= i2c-smbus.o
 obj-$(CONFIG_I2C_CHARDEV)	+= i2c-dev.o
 obj-$(CONFIG_I2C_MUX)		+= i2c-mux.o
@@ -12,4 +17,4 @@ obj-$(CONFIG_I2C_STUB)		+= i2c-stub.o
 obj-$(CONFIG_I2C_SLAVE_EEPROM)	+= i2c-slave-eeprom.o
 
 ccflags-$(CONFIG_I2C_DEBUG_CORE) := -DDEBUG
-CFLAGS_i2c-core.o := -Wno-deprecated-declarations
+CFLAGS_i2c-core-base.o := -Wno-deprecated-declarations
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index a8e89df665b9..1147bddb8b2c 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -553,9 +553,16 @@ static int bit_xfer(struct i2c_adapter *i2c_adap,
 		nak_ok = pmsg->flags & I2C_M_IGNORE_NAK;
 		if (!(pmsg->flags & I2C_M_NOSTART)) {
 			if (i) {
-				bit_dbg(3, &i2c_adap->dev, "emitting "
-					"repeated start condition\n");
-				i2c_repstart(adap);
+				if (msgs[i - 1].flags & I2C_M_STOP) {
+					bit_dbg(3, &i2c_adap->dev,
+						"emitting enforced stop/start condition\n");
+					i2c_stop(adap);
+					i2c_start(adap);
+				} else {
+					bit_dbg(3, &i2c_adap->dev,
+						"emitting repeated start condition\n");
+					i2c_repstart(adap);
+				}
 			}
 			ret = bit_doAddress(i2c_adap, pmsg);
 			if ((ret != 0) && !nak_ok) {
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 144cbadc7c72..1006b230b236 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -129,6 +129,8 @@ config I2C_I801
 	    Broxton (SOC)
 	    Lewisburg (PCH)
 	    Gemini Lake (SOC)
+	    Cannon Lake-H (PCH)
+	    Cannon Lake-LP (PCH)
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-i801.
@@ -326,6 +328,16 @@ config I2C_POWERMAC
 
 comment "I2C system bus drivers (mostly embedded / system-on-chip)"
 
+config I2C_ASPEED
+	tristate "Aspeed I2C Controller"
+	depends on ARCH_ASPEED || COMPILE_TEST
+	help
+	  If you say yes to this option, support will be included for the
+	  Aspeed I2C controller.
+
+	  This driver can also be built as a module.  If so, the module
+	  will be called i2c-aspeed.
+
 config I2C_AT91
 	tristate "Atmel AT91 I2C Two-Wire interface (TWI)"
 	depends on ARCH_AT91
@@ -474,11 +486,22 @@ config I2C_DESIGNWARE_PLATFORM
 	depends on (ACPI && COMMON_CLK) || !ACPI
 	help
 	  If you say yes to this option, support will be included for the
-	  Synopsys DesignWare I2C adapter. Only master mode is supported.
+	  Synopsys DesignWare I2C adapter.
 
 	  This driver can also be built as a module.  If so, the module
 	  will be called i2c-designware-platform.
 
+config I2C_DESIGNWARE_SLAVE
+	bool "Synopsys DesignWare Slave"
+	select I2C_SLAVE
+	depends on I2C_DESIGNWARE_PLATFORM
+	help
+	  If you say yes to this option, support will be included for the
+	  Synopsys DesignWare I2C slave adapter.
+
+	  This is not a standalone module, this module compiles together with
+	  i2c-designware-core.
+
 config I2C_DESIGNWARE_PCI
 	tristate "Synopsys DesignWare PCI"
 	depends on PCI
@@ -1258,4 +1281,13 @@ config I2C_OPAL
 	  This driver can also be built as a module. If so, the module will be
 	  called as i2c-opal.
 
+config I2C_ZX2967
+	tristate "ZTE ZX2967 I2C support"
+	depends on ARCH_ZX
+	default y
+	help
+	  Selecting this option will add ZX2967 I2C driver.
+	  This driver can also be built as a module. If so, the module will be
+	  called i2c-zx2967.
+
 endmenu
diff --git a/drivers/i2c/busses/Makefile b/drivers/i2c/busses/Makefile
index 30b60855fbcd..1b2fc815a4d8 100644
--- a/drivers/i2c/busses/Makefile
+++ b/drivers/i2c/busses/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_I2C_HYDRA)		+= i2c-hydra.o
 obj-$(CONFIG_I2C_POWERMAC)	+= i2c-powermac.o
 
 # Embedded system I2C/SMBus host controller drivers
+obj-$(CONFIG_I2C_ASPEED)	+= i2c-aspeed.o
 obj-$(CONFIG_I2C_AT91)		+= i2c-at91.o
 obj-$(CONFIG_I2C_AU1550)	+= i2c-au1550.o
 obj-$(CONFIG_I2C_AXXIA)		+= i2c-axxia.o
@@ -40,6 +41,10 @@ obj-$(CONFIG_I2C_CBUS_GPIO)	+= i2c-cbus-gpio.o
 obj-$(CONFIG_I2C_CPM)		+= i2c-cpm.o
 obj-$(CONFIG_I2C_DAVINCI)	+= i2c-davinci.o
 obj-$(CONFIG_I2C_DESIGNWARE_CORE)	+= i2c-designware-core.o
+i2c-designware-core-objs := i2c-designware-common.o i2c-designware-master.o
+ifeq ($(CONFIG_I2C_DESIGNWARE_SLAVE),y)
+i2c-designware-core-objs += i2c-designware-slave.o
+endif
 obj-$(CONFIG_I2C_DESIGNWARE_PLATFORM)	+= i2c-designware-platform.o
 i2c-designware-platform-objs := i2c-designware-platdrv.o
 i2c-designware-platform-$(CONFIG_I2C_DESIGNWARE_BAYTRAIL) += i2c-designware-baytrail.o
@@ -102,6 +107,7 @@ obj-$(CONFIG_I2C_XILINX)	+= i2c-xiic.o
 obj-$(CONFIG_I2C_XLR)		+= i2c-xlr.o
 obj-$(CONFIG_I2C_XLP9XX)	+= i2c-xlp9xx.o
 obj-$(CONFIG_I2C_RCAR)		+= i2c-rcar.o
+obj-$(CONFIG_I2C_ZX2967)	+= i2c-zx2967.o
 
 # External I2C/SMBus adapter drivers
 obj-$(CONFIG_I2C_DIOLAN_U2C)	+= i2c-diolan-u2c.o
diff --git a/drivers/i2c/busses/i2c-aspeed.c b/drivers/i2c/busses/i2c-aspeed.c
new file mode 100644
index 000000000000..f19348328a71
--- /dev/null
+++ b/drivers/i2c/busses/i2c-aspeed.c
@@ -0,0 +1,891 @@
+/*
+ *  Aspeed 24XX/25XX I2C Controller.
+ *
+ *  Copyright (C) 2012-2017 ASPEED Technology Inc.
+ *  Copyright 2017 IBM Corporation
+ *  Copyright 2017 Google, Inc.
+ *
+ *  This program is free software; you can redistribute it and/or modify
+ *  it under the terms of the GNU General Public License version 2 as
+ *  published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/init.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/irq.h>
+#include <linux/irqchip/chained_irq.h>
+#include <linux/irqdomain.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of_address.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+
+/* I2C Register */
+#define ASPEED_I2C_FUN_CTRL_REG				0x00
+#define ASPEED_I2C_AC_TIMING_REG1			0x04
+#define ASPEED_I2C_AC_TIMING_REG2			0x08
+#define ASPEED_I2C_INTR_CTRL_REG			0x0c
+#define ASPEED_I2C_INTR_STS_REG				0x10
+#define ASPEED_I2C_CMD_REG				0x14
+#define ASPEED_I2C_DEV_ADDR_REG				0x18
+#define ASPEED_I2C_BYTE_BUF_REG				0x20
+
+/* Global Register Definition */
+/* 0x00 : I2C Interrupt Status Register  */
+/* 0x08 : I2C Interrupt Target Assignment  */
+
+/* Device Register Definition */
+/* 0x00 : I2CD Function Control Register  */
+#define ASPEED_I2CD_MULTI_MASTER_DIS			BIT(15)
+#define ASPEED_I2CD_SDA_DRIVE_1T_EN			BIT(8)
+#define ASPEED_I2CD_M_SDA_DRIVE_1T_EN			BIT(7)
+#define ASPEED_I2CD_M_HIGH_SPEED_EN			BIT(6)
+#define ASPEED_I2CD_SLAVE_EN				BIT(1)
+#define ASPEED_I2CD_MASTER_EN				BIT(0)
+
+/* 0x04 : I2CD Clock and AC Timing Control Register #1 */
+#define ASPEED_I2CD_TIME_SCL_HIGH_SHIFT			16
+#define ASPEED_I2CD_TIME_SCL_HIGH_MASK			GENMASK(19, 16)
+#define ASPEED_I2CD_TIME_SCL_LOW_SHIFT			12
+#define ASPEED_I2CD_TIME_SCL_LOW_MASK			GENMASK(15, 12)
+#define ASPEED_I2CD_TIME_BASE_DIVISOR_MASK		GENMASK(3, 0)
+#define ASPEED_I2CD_TIME_SCL_REG_MAX			GENMASK(3, 0)
+/* 0x08 : I2CD Clock and AC Timing Control Register #2 */
+#define ASPEED_NO_TIMEOUT_CTRL				0
+
+/* 0x0c : I2CD Interrupt Control Register &
+ * 0x10 : I2CD Interrupt Status Register
+ *
+ * These share bit definitions, so use the same values for the enable &
+ * status bits.
+ */
+#define ASPEED_I2CD_INTR_SDA_DL_TIMEOUT			BIT(14)
+#define ASPEED_I2CD_INTR_BUS_RECOVER_DONE		BIT(13)
+#define ASPEED_I2CD_INTR_SLAVE_MATCH			BIT(7)
+#define ASPEED_I2CD_INTR_SCL_TIMEOUT			BIT(6)
+#define ASPEED_I2CD_INTR_ABNORMAL			BIT(5)
+#define ASPEED_I2CD_INTR_NORMAL_STOP			BIT(4)
+#define ASPEED_I2CD_INTR_ARBIT_LOSS			BIT(3)
+#define ASPEED_I2CD_INTR_RX_DONE			BIT(2)
+#define ASPEED_I2CD_INTR_TX_NAK				BIT(1)
+#define ASPEED_I2CD_INTR_TX_ACK				BIT(0)
+#define ASPEED_I2CD_INTR_ALL						       \
+		(ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |			       \
+		 ASPEED_I2CD_INTR_BUS_RECOVER_DONE |			       \
+		 ASPEED_I2CD_INTR_SCL_TIMEOUT |				       \
+		 ASPEED_I2CD_INTR_ABNORMAL |				       \
+		 ASPEED_I2CD_INTR_NORMAL_STOP |				       \
+		 ASPEED_I2CD_INTR_ARBIT_LOSS |				       \
+		 ASPEED_I2CD_INTR_RX_DONE |				       \
+		 ASPEED_I2CD_INTR_TX_NAK |				       \
+		 ASPEED_I2CD_INTR_TX_ACK)
+
+/* 0x14 : I2CD Command/Status Register   */
+#define ASPEED_I2CD_SCL_LINE_STS			BIT(18)
+#define ASPEED_I2CD_SDA_LINE_STS			BIT(17)
+#define ASPEED_I2CD_BUS_BUSY_STS			BIT(16)
+#define ASPEED_I2CD_BUS_RECOVER_CMD			BIT(11)
+
+/* Command Bit */
+#define ASPEED_I2CD_M_STOP_CMD				BIT(5)
+#define ASPEED_I2CD_M_S_RX_CMD_LAST			BIT(4)
+#define ASPEED_I2CD_M_RX_CMD				BIT(3)
+#define ASPEED_I2CD_S_TX_CMD				BIT(2)
+#define ASPEED_I2CD_M_TX_CMD				BIT(1)
+#define ASPEED_I2CD_M_START_CMD				BIT(0)
+
+/* 0x18 : I2CD Slave Device Address Register   */
+#define ASPEED_I2CD_DEV_ADDR_MASK			GENMASK(6, 0)
+
+enum aspeed_i2c_master_state {
+	ASPEED_I2C_MASTER_START,
+	ASPEED_I2C_MASTER_TX_FIRST,
+	ASPEED_I2C_MASTER_TX,
+	ASPEED_I2C_MASTER_RX_FIRST,
+	ASPEED_I2C_MASTER_RX,
+	ASPEED_I2C_MASTER_STOP,
+	ASPEED_I2C_MASTER_INACTIVE,
+};
+
+enum aspeed_i2c_slave_state {
+	ASPEED_I2C_SLAVE_START,
+	ASPEED_I2C_SLAVE_READ_REQUESTED,
+	ASPEED_I2C_SLAVE_READ_PROCESSED,
+	ASPEED_I2C_SLAVE_WRITE_REQUESTED,
+	ASPEED_I2C_SLAVE_WRITE_RECEIVED,
+	ASPEED_I2C_SLAVE_STOP,
+};
+
+struct aspeed_i2c_bus {
+	struct i2c_adapter		adap;
+	struct device			*dev;
+	void __iomem			*base;
+	/* Synchronizes I/O mem access to base. */
+	spinlock_t			lock;
+	struct completion		cmd_complete;
+	unsigned long			parent_clk_frequency;
+	u32				bus_frequency;
+	/* Transaction state. */
+	enum aspeed_i2c_master_state	master_state;
+	struct i2c_msg			*msgs;
+	size_t				buf_index;
+	size_t				msgs_index;
+	size_t				msgs_count;
+	bool				send_stop;
+	int				cmd_err;
+	/* Protected only by i2c_lock_bus */
+	int				master_xfer_result;
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	struct i2c_client		*slave;
+	enum aspeed_i2c_slave_state	slave_state;
+#endif /* CONFIG_I2C_SLAVE */
+};
+
+static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus);
+
+static int aspeed_i2c_recover_bus(struct aspeed_i2c_bus *bus)
+{
+	unsigned long time_left, flags;
+	int ret = 0;
+	u32 command;
+
+	spin_lock_irqsave(&bus->lock, flags);
+	command = readl(bus->base + ASPEED_I2C_CMD_REG);
+
+	if (command & ASPEED_I2CD_SDA_LINE_STS) {
+		/* Bus is idle: no recovery needed. */
+		if (command & ASPEED_I2CD_SCL_LINE_STS)
+			goto out;
+		dev_dbg(bus->dev, "SCL hung (state %x), attempting recovery\n",
+			command);
+
+		reinit_completion(&bus->cmd_complete);
+		writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG);
+		spin_unlock_irqrestore(&bus->lock, flags);
+
+		time_left = wait_for_completion_timeout(
+				&bus->cmd_complete, bus->adap.timeout);
+
+		spin_lock_irqsave(&bus->lock, flags);
+		if (time_left == 0)
+			goto reset_out;
+		else if (bus->cmd_err)
+			goto reset_out;
+		/* Recovery failed. */
+		else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) &
+			   ASPEED_I2CD_SCL_LINE_STS))
+			goto reset_out;
+	/* Bus error. */
+	} else {
+		dev_dbg(bus->dev, "SDA hung (state %x), attempting recovery\n",
+			command);
+
+		reinit_completion(&bus->cmd_complete);
+		/* Writes 1 to 8 SCL clock cycles until SDA is released. */
+		writel(ASPEED_I2CD_BUS_RECOVER_CMD,
+		       bus->base + ASPEED_I2C_CMD_REG);
+		spin_unlock_irqrestore(&bus->lock, flags);
+
+		time_left = wait_for_completion_timeout(
+				&bus->cmd_complete, bus->adap.timeout);
+
+		spin_lock_irqsave(&bus->lock, flags);
+		if (time_left == 0)
+			goto reset_out;
+		else if (bus->cmd_err)
+			goto reset_out;
+		/* Recovery failed. */
+		else if (!(readl(bus->base + ASPEED_I2C_CMD_REG) &
+			   ASPEED_I2CD_SDA_LINE_STS))
+			goto reset_out;
+	}
+
+out:
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return ret;
+
+reset_out:
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return aspeed_i2c_reset(bus);
+}
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+static bool aspeed_i2c_slave_irq(struct aspeed_i2c_bus *bus)
+{
+	u32 command, irq_status, status_ack = 0;
+	struct i2c_client *slave = bus->slave;
+	bool irq_handled = true;
+	u8 value;
+
+	spin_lock(&bus->lock);
+	if (!slave) {
+		irq_handled = false;
+		goto out;
+	}
+
+	command = readl(bus->base + ASPEED_I2C_CMD_REG);
+	irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
+
+	/* Slave was requested, restart state machine. */
+	if (irq_status & ASPEED_I2CD_INTR_SLAVE_MATCH) {
+		status_ack |= ASPEED_I2CD_INTR_SLAVE_MATCH;
+		bus->slave_state = ASPEED_I2C_SLAVE_START;
+	}
+
+	/* Slave is not currently active, irq was for someone else. */
+	if (bus->slave_state == ASPEED_I2C_SLAVE_STOP) {
+		irq_handled = false;
+		goto out;
+	}
+
+	dev_dbg(bus->dev, "slave irq status 0x%08x, cmd 0x%08x\n",
+		irq_status, command);
+
+	/* Slave was sent something. */
+	if (irq_status & ASPEED_I2CD_INTR_RX_DONE) {
+		value = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8;
+		/* Handle address frame. */
+		if (bus->slave_state == ASPEED_I2C_SLAVE_START) {
+			if (value & 0x1)
+				bus->slave_state =
+						ASPEED_I2C_SLAVE_READ_REQUESTED;
+			else
+				bus->slave_state =
+						ASPEED_I2C_SLAVE_WRITE_REQUESTED;
+		}
+		status_ack |= ASPEED_I2CD_INTR_RX_DONE;
+	}
+
+	/* Slave was asked to stop. */
+	if (irq_status & ASPEED_I2CD_INTR_NORMAL_STOP) {
+		status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
+		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+	}
+	if (irq_status & ASPEED_I2CD_INTR_TX_NAK) {
+		status_ack |= ASPEED_I2CD_INTR_TX_NAK;
+		bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+	}
+
+	switch (bus->slave_state) {
+	case ASPEED_I2C_SLAVE_READ_REQUESTED:
+		if (irq_status & ASPEED_I2CD_INTR_TX_ACK)
+			dev_err(bus->dev, "Unexpected ACK on read request.\n");
+		bus->slave_state = ASPEED_I2C_SLAVE_READ_PROCESSED;
+
+		i2c_slave_event(slave, I2C_SLAVE_READ_REQUESTED, &value);
+		writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG);
+		writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG);
+		break;
+	case ASPEED_I2C_SLAVE_READ_PROCESSED:
+		status_ack |= ASPEED_I2CD_INTR_TX_ACK;
+		if (!(irq_status & ASPEED_I2CD_INTR_TX_ACK))
+			dev_err(bus->dev,
+				"Expected ACK after processed read.\n");
+		i2c_slave_event(slave, I2C_SLAVE_READ_PROCESSED, &value);
+		writel(value, bus->base + ASPEED_I2C_BYTE_BUF_REG);
+		writel(ASPEED_I2CD_S_TX_CMD, bus->base + ASPEED_I2C_CMD_REG);
+		break;
+	case ASPEED_I2C_SLAVE_WRITE_REQUESTED:
+		bus->slave_state = ASPEED_I2C_SLAVE_WRITE_RECEIVED;
+		i2c_slave_event(slave, I2C_SLAVE_WRITE_REQUESTED, &value);
+		break;
+	case ASPEED_I2C_SLAVE_WRITE_RECEIVED:
+		i2c_slave_event(slave, I2C_SLAVE_WRITE_RECEIVED, &value);
+		break;
+	case ASPEED_I2C_SLAVE_STOP:
+		i2c_slave_event(slave, I2C_SLAVE_STOP, &value);
+		break;
+	default:
+		dev_err(bus->dev, "unhandled slave_state: %d\n",
+			bus->slave_state);
+		break;
+	}
+
+	if (status_ack != irq_status)
+		dev_err(bus->dev,
+			"irq handled != irq. expected %x, but was %x\n",
+			irq_status, status_ack);
+	writel(status_ack, bus->base + ASPEED_I2C_INTR_STS_REG);
+
+out:
+	spin_unlock(&bus->lock);
+	return irq_handled;
+}
+#endif /* CONFIG_I2C_SLAVE */
+
+/* precondition: bus.lock has been acquired. */
+static void aspeed_i2c_do_start(struct aspeed_i2c_bus *bus)
+{
+	u32 command = ASPEED_I2CD_M_START_CMD | ASPEED_I2CD_M_TX_CMD;
+	struct i2c_msg *msg = &bus->msgs[bus->msgs_index];
+	u8 slave_addr = msg->addr << 1;
+
+	bus->master_state = ASPEED_I2C_MASTER_START;
+	bus->buf_index = 0;
+
+	if (msg->flags & I2C_M_RD) {
+		slave_addr |= 1;
+		command |= ASPEED_I2CD_M_RX_CMD;
+		/* Need to let the hardware know to NACK after RX. */
+		if (msg->len == 1 && !(msg->flags & I2C_M_RECV_LEN))
+			command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
+	}
+
+	writel(slave_addr, bus->base + ASPEED_I2C_BYTE_BUF_REG);
+	writel(command, bus->base + ASPEED_I2C_CMD_REG);
+}
+
+/* precondition: bus.lock has been acquired. */
+static void aspeed_i2c_do_stop(struct aspeed_i2c_bus *bus)
+{
+	bus->master_state = ASPEED_I2C_MASTER_STOP;
+	writel(ASPEED_I2CD_M_STOP_CMD, bus->base + ASPEED_I2C_CMD_REG);
+}
+
+/* precondition: bus.lock has been acquired. */
+static void aspeed_i2c_next_msg_or_stop(struct aspeed_i2c_bus *bus)
+{
+	if (bus->msgs_index + 1 < bus->msgs_count) {
+		bus->msgs_index++;
+		aspeed_i2c_do_start(bus);
+	} else {
+		aspeed_i2c_do_stop(bus);
+	}
+}
+
+static int aspeed_i2c_is_irq_error(u32 irq_status)
+{
+	if (irq_status & ASPEED_I2CD_INTR_ARBIT_LOSS)
+		return -EAGAIN;
+	if (irq_status & (ASPEED_I2CD_INTR_SDA_DL_TIMEOUT |
+			  ASPEED_I2CD_INTR_SCL_TIMEOUT))
+		return -EBUSY;
+	if (irq_status & (ASPEED_I2CD_INTR_ABNORMAL))
+		return -EPROTO;
+
+	return 0;
+}
+
+static bool aspeed_i2c_master_irq(struct aspeed_i2c_bus *bus)
+{
+	u32 irq_status, status_ack = 0, command = 0;
+	struct i2c_msg *msg;
+	u8 recv_byte;
+	int ret;
+
+	spin_lock(&bus->lock);
+	irq_status = readl(bus->base + ASPEED_I2C_INTR_STS_REG);
+	/* Ack all interrupt bits. */
+	writel(irq_status, bus->base + ASPEED_I2C_INTR_STS_REG);
+
+	if (irq_status & ASPEED_I2CD_INTR_BUS_RECOVER_DONE) {
+		bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+		status_ack |= ASPEED_I2CD_INTR_BUS_RECOVER_DONE;
+		goto out_complete;
+	}
+
+	/*
+	 * We encountered an interrupt that reports an error: the hardware
+	 * should clear the command queue effectively taking us back to the
+	 * INACTIVE state.
+	 */
+	ret = aspeed_i2c_is_irq_error(irq_status);
+	if (ret < 0) {
+		dev_dbg(bus->dev, "received error interrupt: 0x%08x",
+			irq_status);
+		bus->cmd_err = ret;
+		bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+		goto out_complete;
+	}
+
+	/* We are in an invalid state; reset bus to a known state. */
+	if (!bus->msgs && bus->master_state != ASPEED_I2C_MASTER_STOP) {
+		dev_err(bus->dev, "bus in unknown state");
+		bus->cmd_err = -EIO;
+		aspeed_i2c_do_stop(bus);
+		goto out_no_complete;
+	}
+	msg = &bus->msgs[bus->msgs_index];
+
+	/*
+	 * START is a special case because we still have to handle a subsequent
+	 * TX or RX immediately after we handle it, so we handle it here and
+	 * then update the state and handle the new state below.
+	 */
+	if (bus->master_state == ASPEED_I2C_MASTER_START) {
+		if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
+			pr_devel("no slave present at %02x", msg->addr);
+			status_ack |= ASPEED_I2CD_INTR_TX_NAK;
+			bus->cmd_err = -ENXIO;
+			aspeed_i2c_do_stop(bus);
+			goto out_no_complete;
+		}
+		status_ack |= ASPEED_I2CD_INTR_TX_ACK;
+		if (msg->len == 0) { /* SMBUS_QUICK */
+			aspeed_i2c_do_stop(bus);
+			goto out_no_complete;
+		}
+		if (msg->flags & I2C_M_RD)
+			bus->master_state = ASPEED_I2C_MASTER_RX_FIRST;
+		else
+			bus->master_state = ASPEED_I2C_MASTER_TX_FIRST;
+	}
+
+	switch (bus->master_state) {
+	case ASPEED_I2C_MASTER_TX:
+		if (unlikely(irq_status & ASPEED_I2CD_INTR_TX_NAK)) {
+			dev_dbg(bus->dev, "slave NACKed TX");
+			status_ack |= ASPEED_I2CD_INTR_TX_NAK;
+			goto error_and_stop;
+		} else if (unlikely(!(irq_status & ASPEED_I2CD_INTR_TX_ACK))) {
+			dev_err(bus->dev, "slave failed to ACK TX");
+			goto error_and_stop;
+		}
+		status_ack |= ASPEED_I2CD_INTR_TX_ACK;
+		/* fallthrough intended */
+	case ASPEED_I2C_MASTER_TX_FIRST:
+		if (bus->buf_index < msg->len) {
+			bus->master_state = ASPEED_I2C_MASTER_TX;
+			writel(msg->buf[bus->buf_index++],
+			       bus->base + ASPEED_I2C_BYTE_BUF_REG);
+			writel(ASPEED_I2CD_M_TX_CMD,
+			       bus->base + ASPEED_I2C_CMD_REG);
+		} else {
+			aspeed_i2c_next_msg_or_stop(bus);
+		}
+		goto out_no_complete;
+	case ASPEED_I2C_MASTER_RX_FIRST:
+		/* RX may not have completed yet (only address cycle) */
+		if (!(irq_status & ASPEED_I2CD_INTR_RX_DONE))
+			goto out_no_complete;
+		/* fallthrough intended */
+	case ASPEED_I2C_MASTER_RX:
+		if (unlikely(!(irq_status & ASPEED_I2CD_INTR_RX_DONE))) {
+			dev_err(bus->dev, "master failed to RX");
+			goto error_and_stop;
+		}
+		status_ack |= ASPEED_I2CD_INTR_RX_DONE;
+
+		recv_byte = readl(bus->base + ASPEED_I2C_BYTE_BUF_REG) >> 8;
+		msg->buf[bus->buf_index++] = recv_byte;
+
+		if (msg->flags & I2C_M_RECV_LEN) {
+			if (unlikely(recv_byte > I2C_SMBUS_BLOCK_MAX)) {
+				bus->cmd_err = -EPROTO;
+				aspeed_i2c_do_stop(bus);
+				goto out_no_complete;
+			}
+			msg->len = recv_byte +
+					((msg->flags & I2C_CLIENT_PEC) ? 2 : 1);
+			msg->flags &= ~I2C_M_RECV_LEN;
+		}
+
+		if (bus->buf_index < msg->len) {
+			bus->master_state = ASPEED_I2C_MASTER_RX;
+			command = ASPEED_I2CD_M_RX_CMD;
+			if (bus->buf_index + 1 == msg->len)
+				command |= ASPEED_I2CD_M_S_RX_CMD_LAST;
+			writel(command, bus->base + ASPEED_I2C_CMD_REG);
+		} else {
+			aspeed_i2c_next_msg_or_stop(bus);
+		}
+		goto out_no_complete;
+	case ASPEED_I2C_MASTER_STOP:
+		if (unlikely(!(irq_status & ASPEED_I2CD_INTR_NORMAL_STOP))) {
+			dev_err(bus->dev, "master failed to STOP");
+			bus->cmd_err = -EIO;
+			/* Do not STOP as we have already tried. */
+		} else {
+			status_ack |= ASPEED_I2CD_INTR_NORMAL_STOP;
+		}
+
+		bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+		goto out_complete;
+	case ASPEED_I2C_MASTER_INACTIVE:
+		dev_err(bus->dev,
+			"master received interrupt 0x%08x, but is inactive",
+			irq_status);
+		bus->cmd_err = -EIO;
+		/* Do not STOP as we should be inactive. */
+		goto out_complete;
+	default:
+		WARN(1, "unknown master state\n");
+		bus->master_state = ASPEED_I2C_MASTER_INACTIVE;
+		bus->cmd_err = -EINVAL;
+		goto out_complete;
+	}
+error_and_stop:
+	bus->cmd_err = -EIO;
+	aspeed_i2c_do_stop(bus);
+	goto out_no_complete;
+out_complete:
+	bus->msgs = NULL;
+	if (bus->cmd_err)
+		bus->master_xfer_result = bus->cmd_err;
+	else
+		bus->master_xfer_result = bus->msgs_index + 1;
+	complete(&bus->cmd_complete);
+out_no_complete:
+	if (irq_status != status_ack)
+		dev_err(bus->dev,
+			"irq handled != irq. expected 0x%08x, but was 0x%08x\n",
+			irq_status, status_ack);
+	spin_unlock(&bus->lock);
+	return !!irq_status;
+}
+
+static irqreturn_t aspeed_i2c_bus_irq(int irq, void *dev_id)
+{
+	struct aspeed_i2c_bus *bus = dev_id;
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	if (aspeed_i2c_slave_irq(bus)) {
+		dev_dbg(bus->dev, "irq handled by slave.\n");
+		return IRQ_HANDLED;
+	}
+#endif /* CONFIG_I2C_SLAVE */
+
+	return aspeed_i2c_master_irq(bus) ? IRQ_HANDLED : IRQ_NONE;
+}
+
+static int aspeed_i2c_master_xfer(struct i2c_adapter *adap,
+				  struct i2c_msg *msgs, int num)
+{
+	struct aspeed_i2c_bus *bus = i2c_get_adapdata(adap);
+	unsigned long time_left, flags;
+	int ret = 0;
+
+	spin_lock_irqsave(&bus->lock, flags);
+	bus->cmd_err = 0;
+
+	/* If bus is busy, attempt recovery. We assume a single master
+	 * environment.
+	 */
+	if (readl(bus->base + ASPEED_I2C_CMD_REG) & ASPEED_I2CD_BUS_BUSY_STS) {
+		spin_unlock_irqrestore(&bus->lock, flags);
+		ret = aspeed_i2c_recover_bus(bus);
+		if (ret)
+			return ret;
+		spin_lock_irqsave(&bus->lock, flags);
+	}
+
+	bus->cmd_err = 0;
+	bus->msgs = msgs;
+	bus->msgs_index = 0;
+	bus->msgs_count = num;
+
+	reinit_completion(&bus->cmd_complete);
+	aspeed_i2c_do_start(bus);
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	time_left = wait_for_completion_timeout(&bus->cmd_complete,
+						bus->adap.timeout);
+
+	if (time_left == 0)
+		return -ETIMEDOUT;
+	else
+		return bus->master_xfer_result;
+}
+
+static u32 aspeed_i2c_functionality(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C | I2C_FUNC_SMBUS_EMUL | I2C_FUNC_SMBUS_BLOCK_DATA;
+}
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+/* precondition: bus.lock has been acquired. */
+static void __aspeed_i2c_reg_slave(struct aspeed_i2c_bus *bus, u16 slave_addr)
+{
+	u32 addr_reg_val, func_ctrl_reg_val;
+
+	/* Set slave addr. */
+	addr_reg_val = readl(bus->base + ASPEED_I2C_DEV_ADDR_REG);
+	addr_reg_val &= ~ASPEED_I2CD_DEV_ADDR_MASK;
+	addr_reg_val |= slave_addr & ASPEED_I2CD_DEV_ADDR_MASK;
+	writel(addr_reg_val, bus->base + ASPEED_I2C_DEV_ADDR_REG);
+
+	/* Turn on slave mode. */
+	func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG);
+	func_ctrl_reg_val |= ASPEED_I2CD_SLAVE_EN;
+	writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+}
+
+static int aspeed_i2c_reg_slave(struct i2c_client *client)
+{
+	struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter);
+	unsigned long flags;
+
+	spin_lock_irqsave(&bus->lock, flags);
+	if (bus->slave) {
+		spin_unlock_irqrestore(&bus->lock, flags);
+		return -EINVAL;
+	}
+
+	__aspeed_i2c_reg_slave(bus, client->addr);
+
+	bus->slave = client;
+	bus->slave_state = ASPEED_I2C_SLAVE_STOP;
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return 0;
+}
+
+static int aspeed_i2c_unreg_slave(struct i2c_client *client)
+{
+	struct aspeed_i2c_bus *bus = i2c_get_adapdata(client->adapter);
+	u32 func_ctrl_reg_val;
+	unsigned long flags;
+
+	spin_lock_irqsave(&bus->lock, flags);
+	if (!bus->slave) {
+		spin_unlock_irqrestore(&bus->lock, flags);
+		return -EINVAL;
+	}
+
+	/* Turn off slave mode. */
+	func_ctrl_reg_val = readl(bus->base + ASPEED_I2C_FUN_CTRL_REG);
+	func_ctrl_reg_val &= ~ASPEED_I2CD_SLAVE_EN;
+	writel(func_ctrl_reg_val, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+
+	bus->slave = NULL;
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return 0;
+}
+#endif /* CONFIG_I2C_SLAVE */
+
+static const struct i2c_algorithm aspeed_i2c_algo = {
+	.master_xfer	= aspeed_i2c_master_xfer,
+	.functionality	= aspeed_i2c_functionality,
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	.reg_slave	= aspeed_i2c_reg_slave,
+	.unreg_slave	= aspeed_i2c_unreg_slave,
+#endif /* CONFIG_I2C_SLAVE */
+};
+
+static u32 aspeed_i2c_get_clk_reg_val(u32 divisor)
+{
+	u32 base_clk, clk_high, clk_low, tmp;
+
+	/*
+	 * The actual clock frequency of SCL is:
+	 *	SCL_freq = APB_freq / (base_freq * (SCL_high + SCL_low))
+	 *		 = APB_freq / divisor
+	 * where base_freq is a programmable clock divider; its value is
+	 *	base_freq = 1 << base_clk
+	 * SCL_high is the number of base_freq clock cycles that SCL stays high
+	 * and SCL_low is the number of base_freq clock cycles that SCL stays
+	 * low for a period of SCL.
+	 * The actual register has a minimum SCL_high and SCL_low minimum of 1;
+	 * thus, they start counting at zero. So
+	 *	SCL_high = clk_high + 1
+	 *	SCL_low	 = clk_low + 1
+	 * Thus,
+	 *	SCL_freq = APB_freq /
+	 *		((1 << base_clk) * (clk_high + 1 + clk_low + 1))
+	 * The documentation recommends clk_high >= 8 and clk_low >= 7 when
+	 * possible; this last constraint gives us the following solution:
+	 */
+	base_clk = divisor > 33 ? ilog2((divisor - 1) / 32) + 1 : 0;
+	tmp = divisor / (1 << base_clk);
+	clk_high = tmp / 2 + tmp % 2;
+	clk_low = tmp - clk_high;
+
+	clk_high -= 1;
+	clk_low -= 1;
+
+	return ((clk_high << ASPEED_I2CD_TIME_SCL_HIGH_SHIFT)
+		& ASPEED_I2CD_TIME_SCL_HIGH_MASK)
+			| ((clk_low << ASPEED_I2CD_TIME_SCL_LOW_SHIFT)
+			   & ASPEED_I2CD_TIME_SCL_LOW_MASK)
+			| (base_clk & ASPEED_I2CD_TIME_BASE_DIVISOR_MASK);
+}
+
+/* precondition: bus.lock has been acquired. */
+static int aspeed_i2c_init_clk(struct aspeed_i2c_bus *bus)
+{
+	u32 divisor, clk_reg_val;
+
+	divisor = bus->parent_clk_frequency / bus->bus_frequency;
+	clk_reg_val = aspeed_i2c_get_clk_reg_val(divisor);
+	writel(clk_reg_val, bus->base + ASPEED_I2C_AC_TIMING_REG1);
+	writel(ASPEED_NO_TIMEOUT_CTRL, bus->base + ASPEED_I2C_AC_TIMING_REG2);
+
+	return 0;
+}
+
+/* precondition: bus.lock has been acquired. */
+static int aspeed_i2c_init(struct aspeed_i2c_bus *bus,
+			     struct platform_device *pdev)
+{
+	u32 fun_ctrl_reg = ASPEED_I2CD_MASTER_EN;
+	int ret;
+
+	/* Disable everything. */
+	writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+
+	ret = aspeed_i2c_init_clk(bus);
+	if (ret < 0)
+		return ret;
+
+	if (!of_property_read_bool(pdev->dev.of_node, "multi-master"))
+		fun_ctrl_reg |= ASPEED_I2CD_MULTI_MASTER_DIS;
+
+	/* Enable Master Mode */
+	writel(readl(bus->base + ASPEED_I2C_FUN_CTRL_REG) | fun_ctrl_reg,
+	       bus->base + ASPEED_I2C_FUN_CTRL_REG);
+
+#if IS_ENABLED(CONFIG_I2C_SLAVE)
+	/* If slave has already been registered, re-enable it. */
+	if (bus->slave)
+		__aspeed_i2c_reg_slave(bus, bus->slave->addr);
+#endif /* CONFIG_I2C_SLAVE */
+
+	/* Set interrupt generation of I2C controller */
+	writel(ASPEED_I2CD_INTR_ALL, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+
+	return 0;
+}
+
+static int aspeed_i2c_reset(struct aspeed_i2c_bus *bus)
+{
+	struct platform_device *pdev = to_platform_device(bus->dev);
+	unsigned long flags;
+	int ret;
+
+	spin_lock_irqsave(&bus->lock, flags);
+
+	/* Disable and ack all interrupts. */
+	writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+	writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG);
+
+	ret = aspeed_i2c_init(bus, pdev);
+
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	return ret;
+}
+
+static int aspeed_i2c_probe_bus(struct platform_device *pdev)
+{
+	struct aspeed_i2c_bus *bus;
+	struct clk *parent_clk;
+	struct resource *res;
+	int irq, ret;
+
+	bus = devm_kzalloc(&pdev->dev, sizeof(*bus), GFP_KERNEL);
+	if (!bus)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	bus->base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(bus->base))
+		return PTR_ERR(bus->base);
+
+	parent_clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(parent_clk))
+		return PTR_ERR(parent_clk);
+	bus->parent_clk_frequency = clk_get_rate(parent_clk);
+	/* We just need the clock rate, we don't actually use the clk object. */
+	devm_clk_put(&pdev->dev, parent_clk);
+
+	ret = of_property_read_u32(pdev->dev.of_node,
+				   "bus-frequency", &bus->bus_frequency);
+	if (ret < 0) {
+		dev_err(&pdev->dev,
+			"Could not read bus-frequency property\n");
+		bus->bus_frequency = 100000;
+	}
+
+	/* Initialize the I2C adapter */
+	spin_lock_init(&bus->lock);
+	init_completion(&bus->cmd_complete);
+	bus->adap.owner = THIS_MODULE;
+	bus->adap.retries = 0;
+	bus->adap.timeout = 5 * HZ;
+	bus->adap.algo = &aspeed_i2c_algo;
+	bus->adap.dev.parent = &pdev->dev;
+	bus->adap.dev.of_node = pdev->dev.of_node;
+	strlcpy(bus->adap.name, pdev->name, sizeof(bus->adap.name));
+	i2c_set_adapdata(&bus->adap, bus);
+
+	bus->dev = &pdev->dev;
+
+	/* Clean up any left over interrupt state. */
+	writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+	writel(0xffffffff, bus->base + ASPEED_I2C_INTR_STS_REG);
+	/*
+	 * bus.lock does not need to be held because the interrupt handler has
+	 * not been enabled yet.
+	 */
+	ret = aspeed_i2c_init(bus, pdev);
+	if (ret < 0)
+		return ret;
+
+	irq = irq_of_parse_and_map(pdev->dev.of_node, 0);
+	ret = devm_request_irq(&pdev->dev, irq, aspeed_i2c_bus_irq,
+			       0, dev_name(&pdev->dev), bus);
+	if (ret < 0)
+		return ret;
+
+	ret = i2c_add_adapter(&bus->adap);
+	if (ret < 0)
+		return ret;
+
+	platform_set_drvdata(pdev, bus);
+
+	dev_info(bus->dev, "i2c bus %d registered, irq %d\n",
+		 bus->adap.nr, irq);
+
+	return 0;
+}
+
+static int aspeed_i2c_remove_bus(struct platform_device *pdev)
+{
+	struct aspeed_i2c_bus *bus = platform_get_drvdata(pdev);
+	unsigned long flags;
+
+	spin_lock_irqsave(&bus->lock, flags);
+
+	/* Disable everything. */
+	writel(0, bus->base + ASPEED_I2C_FUN_CTRL_REG);
+	writel(0, bus->base + ASPEED_I2C_INTR_CTRL_REG);
+
+	spin_unlock_irqrestore(&bus->lock, flags);
+
+	i2c_del_adapter(&bus->adap);
+
+	return 0;
+}
+
+static const struct of_device_id aspeed_i2c_bus_of_table[] = {
+	{ .compatible = "aspeed,ast2400-i2c-bus", },
+	{ .compatible = "aspeed,ast2500-i2c-bus", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, aspeed_i2c_bus_of_table);
+
+static struct platform_driver aspeed_i2c_bus_driver = {
+	.probe		= aspeed_i2c_probe_bus,
+	.remove		= aspeed_i2c_remove_bus,
+	.driver		= {
+		.name		= "aspeed-i2c-bus",
+		.of_match_table	= aspeed_i2c_bus_of_table,
+	},
+};
+module_platform_driver(aspeed_i2c_bus_driver);
+
+MODULE_AUTHOR("Brendan Higgins <brendanhiggins@google.com>");
+MODULE_DESCRIPTION("Aspeed I2C Bus Driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-at91.c b/drivers/i2c/busses/i2c-at91.c
index fabbb9e49161..38dd61d621df 100644
--- a/drivers/i2c/busses/i2c-at91.c
+++ b/drivers/i2c/busses/i2c-at91.c
@@ -274,7 +274,7 @@ static void at91_twi_write_next_byte(struct at91_twi_dev *dev)
 		if (!dev->use_alt_cmd)
 			at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
 
-	dev_dbg(dev->dev, "wrote 0x%x, to go %d\n", *dev->buf, dev->buf_len);
+	dev_dbg(dev->dev, "wrote 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
 
 	++dev->buf;
 }
@@ -402,7 +402,7 @@ static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
 			dev->msg->flags &= ~I2C_M_RECV_LEN;
 			dev->buf_len += *dev->buf;
 			dev->msg->len = dev->buf_len + 1;
-			dev_dbg(dev->dev, "received block length %d\n",
+			dev_dbg(dev->dev, "received block length %zu\n",
 					 dev->buf_len);
 		} else {
 			/* abort and send the stop by reading one more byte */
@@ -415,7 +415,7 @@ static void at91_twi_read_next_byte(struct at91_twi_dev *dev)
 	if (!dev->use_alt_cmd && dev->buf_len == 1)
 		at91_twi_write(dev, AT91_TWI_CR, AT91_TWI_STOP);
 
-	dev_dbg(dev->dev, "read 0x%x, to go %d\n", *dev->buf, dev->buf_len);
+	dev_dbg(dev->dev, "read 0x%x, to go %zu\n", *dev->buf, dev->buf_len);
 
 	++dev->buf;
 }
@@ -622,7 +622,7 @@ static int at91_do_twi_transfer(struct at91_twi_dev *dev)
 	 * writing the corresponding bit into the Control Register.
 	 */
 
-	dev_dbg(dev->dev, "transfer: %s %d bytes.\n",
+	dev_dbg(dev->dev, "transfer: %s %zu bytes.\n",
 		(dev->msg->flags & I2C_M_RD) ? "read" : "write", dev->buf_len);
 
 	reinit_completion(&dev->cmd_complete);
@@ -1083,12 +1083,16 @@ static int at91_twi_probe(struct platform_device *pdev)
 		dev_err(dev->dev, "no clock defined\n");
 		return -ENODEV;
 	}
-	clk_prepare_enable(dev->clk);
+	rc = clk_prepare_enable(dev->clk);
+	if (rc)
+		return rc;
 
 	if (dev->dev->of_node) {
 		rc = at91_twi_configure_dma(dev, phy_addr);
-		if (rc == -EPROBE_DEFER)
+		if (rc == -EPROBE_DEFER) {
+			clk_disable_unprepare(dev->clk);
 			return rc;
+		}
 	}
 
 	if (!of_property_read_u32(pdev->dev.of_node, "atmel,fifo-size",
diff --git a/drivers/i2c/busses/i2c-cadence.c b/drivers/i2c/busses/i2c-cadence.c
index 45d6771fac8c..75d80161931f 100644
--- a/drivers/i2c/busses/i2c-cadence.c
+++ b/drivers/i2c/busses/i2c-cadence.c
@@ -405,14 +405,14 @@ static void cdns_i2c_mrecv(struct cdns_i2c *id)
 		cdns_i2c_writereg(id->recv_count, CDNS_I2C_XFER_SIZE_OFFSET);
 	}
 
+	/* Set the slave address in address register - triggers operation */
+	cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
+						CDNS_I2C_ADDR_OFFSET);
 	/* Clear the bus hold flag if bytes to receive is less than FIFO size */
 	if (!id->bus_hold_flag &&
 		((id->p_msg->flags & I2C_M_RECV_LEN) != I2C_M_RECV_LEN) &&
 		(id->recv_count <= CDNS_I2C_FIFO_DEPTH))
 			cdns_i2c_clear_bus_hold(id);
-	/* Set the slave address in address register - triggers operation */
-	cdns_i2c_writereg(id->p_msg->addr & CDNS_I2C_ADDR_MASK,
-						CDNS_I2C_ADDR_OFFSET);
 	cdns_i2c_writereg(CDNS_I2C_ENABLED_INTR_MASK, CDNS_I2C_IER_OFFSET);
 }
 
diff --git a/drivers/i2c/busses/i2c-designware-common.c b/drivers/i2c/busses/i2c-designware-common.c
new file mode 100644
index 000000000000..d1a69372432f
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-common.c
@@ -0,0 +1,281 @@
+/*
+ * Synopsys DesignWare I2C adapter driver.
+ *
+ * Based on the TI DAVINCI I2C adapter driver.
+ *
+ * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2007 MontaVista Software Inc.
+ * Copyright (C) 2009 Provigent Ltd.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * ----------------------------------------------------------------------------
+ *
+ */
+#include <linux/delay.h>
+#include <linux/export.h>
+#include <linux/errno.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+
+#include "i2c-designware-core.h"
+
+static char *abort_sources[] = {
+	[ABRT_7B_ADDR_NOACK] =
+		"slave address not acknowledged (7bit mode)",
+	[ABRT_10ADDR1_NOACK] =
+		"first address byte not acknowledged (10bit mode)",
+	[ABRT_10ADDR2_NOACK] =
+		"second address byte not acknowledged (10bit mode)",
+	[ABRT_TXDATA_NOACK] =
+		"data not acknowledged",
+	[ABRT_GCALL_NOACK] =
+		"no acknowledgement for a general call",
+	[ABRT_GCALL_READ] =
+		"read after general call",
+	[ABRT_SBYTE_ACKDET] =
+		"start byte acknowledged",
+	[ABRT_SBYTE_NORSTRT] =
+		"trying to send start byte when restart is disabled",
+	[ABRT_10B_RD_NORSTRT] =
+		"trying to read when restart is disabled (10bit mode)",
+	[ABRT_MASTER_DIS] =
+		"trying to use disabled adapter",
+	[ARB_LOST] =
+		"lost arbitration",
+	[ABRT_SLAVE_FLUSH_TXFIFO] =
+		"read command so flush old data in the TX FIFO",
+	[ABRT_SLAVE_ARBLOST] =
+		"slave lost the bus while transmitting data to a remote master",
+	[ABRT_SLAVE_RD_INTX] =
+		"incorrect slave-transmitter mode configuration",
+};
+
+u32 dw_readl(struct dw_i2c_dev *dev, int offset)
+{
+	u32 value;
+
+	if (dev->flags & ACCESS_16BIT)
+		value = readw_relaxed(dev->base + offset) |
+			(readw_relaxed(dev->base + offset + 2) << 16);
+	else
+		value = readl_relaxed(dev->base + offset);
+
+	if (dev->flags & ACCESS_SWAP)
+		return swab32(value);
+	else
+		return value;
+}
+
+void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
+{
+	if (dev->flags & ACCESS_SWAP)
+		b = swab32(b);
+
+	if (dev->flags & ACCESS_16BIT) {
+		writew_relaxed((u16)b, dev->base + offset);
+		writew_relaxed((u16)(b >> 16), dev->base + offset + 2);
+	} else {
+		writel_relaxed(b, dev->base + offset);
+	}
+}
+
+u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
+{
+	/*
+	 * DesignWare I2C core doesn't seem to have solid strategy to meet
+	 * the tHD;STA timing spec.  Configuring _HCNT based on tHIGH spec
+	 * will result in violation of the tHD;STA spec.
+	 */
+	if (cond)
+		/*
+		 * Conditional expression:
+		 *
+		 *   IC_[FS]S_SCL_HCNT + (1+4+3) >= IC_CLK * tHIGH
+		 *
+		 * This is based on the DW manuals, and represents an ideal
+		 * configuration.  The resulting I2C bus speed will be
+		 * faster than any of the others.
+		 *
+		 * If your hardware is free from tHD;STA issue, try this one.
+		 */
+		return (ic_clk * tSYMBOL + 500000) / 1000000 - 8 + offset;
+	else
+		/*
+		 * Conditional expression:
+		 *
+		 *   IC_[FS]S_SCL_HCNT + 3 >= IC_CLK * (tHD;STA + tf)
+		 *
+		 * This is just experimental rule; the tHD;STA period turned
+		 * out to be proportinal to (_HCNT + 3).  With this setting,
+		 * we could meet both tHIGH and tHD;STA timing specs.
+		 *
+		 * If unsure, you'd better to take this alternative.
+		 *
+		 * The reason why we need to take into account "tf" here,
+		 * is the same as described in i2c_dw_scl_lcnt().
+		 */
+		return (ic_clk * (tSYMBOL + tf) + 500000) / 1000000
+			- 3 + offset;
+}
+
+u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
+{
+	/*
+	 * Conditional expression:
+	 *
+	 *   IC_[FS]S_SCL_LCNT + 1 >= IC_CLK * (tLOW + tf)
+	 *
+	 * DW I2C core starts counting the SCL CNTs for the LOW period
+	 * of the SCL clock (tLOW) as soon as it pulls the SCL line.
+	 * In order to meet the tLOW timing spec, we need to take into
+	 * account the fall time of SCL signal (tf).  Default tf value
+	 * should be 0.3 us, for safety.
+	 */
+	return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset;
+}
+
+void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable)
+{
+	dw_writel(dev, enable, DW_IC_ENABLE);
+}
+
+void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable)
+{
+	int timeout = 100;
+
+	do {
+		__i2c_dw_enable(dev, enable);
+		if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == enable)
+			return;
+
+		/*
+		 * Wait 10 times the signaling period of the highest I2C
+		 * transfer supported by the driver (for 400KHz this is
+		 * 25us) as described in the DesignWare I2C databook.
+		 */
+		usleep_range(25, 250);
+	} while (timeout--);
+
+	dev_warn(dev->dev, "timeout in %sabling adapter\n",
+		 enable ? "en" : "dis");
+}
+
+unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev)
+{
+	/*
+	 * Clock is not necessary if we got LCNT/HCNT values directly from
+	 * the platform code.
+	 */
+	if (WARN_ON_ONCE(!dev->get_clk_rate_khz))
+		return 0;
+	return dev->get_clk_rate_khz(dev);
+}
+
+int i2c_dw_acquire_lock(struct dw_i2c_dev *dev)
+{
+	int ret;
+
+	if (!dev->acquire_lock)
+		return 0;
+
+	ret = dev->acquire_lock(dev);
+	if (!ret)
+		return 0;
+
+	dev_err(dev->dev, "couldn't acquire bus ownership\n");
+
+	return ret;
+}
+
+void i2c_dw_release_lock(struct dw_i2c_dev *dev)
+{
+	if (dev->release_lock)
+		dev->release_lock(dev);
+}
+
+/*
+ * Waiting for bus not busy
+ */
+int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
+{
+	int timeout = TIMEOUT;
+
+	while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
+		if (timeout <= 0) {
+			dev_warn(dev->dev, "timeout waiting for bus ready\n");
+			return -ETIMEDOUT;
+		}
+		timeout--;
+		usleep_range(1000, 1100);
+	}
+
+	return 0;
+}
+
+int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
+{
+	unsigned long abort_source = dev->abort_source;
+	int i;
+
+	if (abort_source & DW_IC_TX_ABRT_NOACK) {
+		for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
+			dev_dbg(dev->dev,
+				"%s: %s\n", __func__, abort_sources[i]);
+		return -EREMOTEIO;
+	}
+
+	for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
+		dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]);
+
+	if (abort_source & DW_IC_TX_ARB_LOST)
+		return -EAGAIN;
+	else if (abort_source & DW_IC_TX_ABRT_GCALL_READ)
+		return -EINVAL; /* wrong msgs[] data */
+	else
+		return -EIO;
+}
+
+u32 i2c_dw_func(struct i2c_adapter *adap)
+{
+	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
+
+	return dev->functionality;
+}
+
+void i2c_dw_disable(struct dw_i2c_dev *dev)
+{
+	/* Disable controller */
+	__i2c_dw_enable_and_wait(dev, false);
+
+	/* Disable all interupts */
+	dw_writel(dev, 0, DW_IC_INTR_MASK);
+	dw_readl(dev, DW_IC_CLR_INTR);
+}
+
+void i2c_dw_disable_int(struct dw_i2c_dev *dev)
+{
+	dw_writel(dev, 0, DW_IC_INTR_MASK);
+}
+
+u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev)
+{
+	return dw_readl(dev, DW_IC_COMP_PARAM_1);
+}
+EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param);
+
+MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core");
+MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-designware-core.h b/drivers/i2c/busses/i2c-designware-core.h
index a7cf429daf60..9fee4c054d3d 100644
--- a/drivers/i2c/busses/i2c-designware-core.h
+++ b/drivers/i2c/busses/i2c-designware-core.h
@@ -1,5 +1,5 @@
 /*
- * Synopsys DesignWare I2C adapter driver (master only).
+ * Synopsys DesignWare I2C adapter driver.
  *
  * Based on the TI DAVINCI I2C adapter driver.
  *
@@ -37,9 +37,152 @@
 #define DW_IC_CON_SPEED_FAST		0x4
 #define DW_IC_CON_SPEED_HIGH		0x6
 #define DW_IC_CON_SPEED_MASK		0x6
+#define DW_IC_CON_10BITADDR_SLAVE		0x8
 #define DW_IC_CON_10BITADDR_MASTER	0x10
 #define DW_IC_CON_RESTART_EN		0x20
 #define DW_IC_CON_SLAVE_DISABLE		0x40
+#define DW_IC_CON_STOP_DET_IFADDRESSED		0x80
+#define DW_IC_CON_TX_EMPTY_CTRL		0x100
+#define DW_IC_CON_RX_FIFO_FULL_HLD_CTRL		0x200
+
+/*
+ * Registers offset
+ */
+#define DW_IC_CON		0x0
+#define DW_IC_TAR		0x4
+#define DW_IC_SAR		0x8
+#define DW_IC_DATA_CMD		0x10
+#define DW_IC_SS_SCL_HCNT	0x14
+#define DW_IC_SS_SCL_LCNT	0x18
+#define DW_IC_FS_SCL_HCNT	0x1c
+#define DW_IC_FS_SCL_LCNT	0x20
+#define DW_IC_HS_SCL_HCNT	0x24
+#define DW_IC_HS_SCL_LCNT	0x28
+#define DW_IC_INTR_STAT		0x2c
+#define DW_IC_INTR_MASK		0x30
+#define DW_IC_RAW_INTR_STAT	0x34
+#define DW_IC_RX_TL		0x38
+#define DW_IC_TX_TL		0x3c
+#define DW_IC_CLR_INTR		0x40
+#define DW_IC_CLR_RX_UNDER	0x44
+#define DW_IC_CLR_RX_OVER	0x48
+#define DW_IC_CLR_TX_OVER	0x4c
+#define DW_IC_CLR_RD_REQ	0x50
+#define DW_IC_CLR_TX_ABRT	0x54
+#define DW_IC_CLR_RX_DONE	0x58
+#define DW_IC_CLR_ACTIVITY	0x5c
+#define DW_IC_CLR_STOP_DET	0x60
+#define DW_IC_CLR_START_DET	0x64
+#define DW_IC_CLR_GEN_CALL	0x68
+#define DW_IC_ENABLE		0x6c
+#define DW_IC_STATUS		0x70
+#define DW_IC_TXFLR		0x74
+#define DW_IC_RXFLR		0x78
+#define DW_IC_SDA_HOLD		0x7c
+#define DW_IC_TX_ABRT_SOURCE	0x80
+#define DW_IC_ENABLE_STATUS	0x9c
+#define DW_IC_CLR_RESTART_DET	0xa8
+#define DW_IC_COMP_PARAM_1	0xf4
+#define DW_IC_COMP_VERSION	0xf8
+#define DW_IC_SDA_HOLD_MIN_VERS	0x3131312A
+#define DW_IC_COMP_TYPE		0xfc
+#define DW_IC_COMP_TYPE_VALUE	0x44570140
+
+#define DW_IC_INTR_RX_UNDER	0x001
+#define DW_IC_INTR_RX_OVER	0x002
+#define DW_IC_INTR_RX_FULL	0x004
+#define DW_IC_INTR_TX_OVER	0x008
+#define DW_IC_INTR_TX_EMPTY	0x010
+#define DW_IC_INTR_RD_REQ	0x020
+#define DW_IC_INTR_TX_ABRT	0x040
+#define DW_IC_INTR_RX_DONE	0x080
+#define DW_IC_INTR_ACTIVITY	0x100
+#define DW_IC_INTR_STOP_DET	0x200
+#define DW_IC_INTR_START_DET	0x400
+#define DW_IC_INTR_GEN_CALL	0x800
+#define DW_IC_INTR_RESTART_DET	0x1000
+
+#define DW_IC_INTR_DEFAULT_MASK		(DW_IC_INTR_RX_FULL | \
+					 DW_IC_INTR_TX_ABRT | \
+					 DW_IC_INTR_STOP_DET)
+#define DW_IC_INTR_MASTER_MASK		(DW_IC_INTR_DEFAULT_MASK | \
+					 DW_IC_INTR_TX_EMPTY)
+#define DW_IC_INTR_SLAVE_MASK		(DW_IC_INTR_DEFAULT_MASK | \
+					 DW_IC_INTR_RX_DONE | \
+					 DW_IC_INTR_RX_UNDER | \
+					 DW_IC_INTR_RD_REQ)
+
+#define DW_IC_STATUS_ACTIVITY		0x1
+#define DW_IC_STATUS_TFE		BIT(2)
+#define DW_IC_STATUS_MASTER_ACTIVITY	BIT(5)
+#define DW_IC_STATUS_SLAVE_ACTIVITY	BIT(6)
+
+#define DW_IC_SDA_HOLD_RX_SHIFT		16
+#define DW_IC_SDA_HOLD_RX_MASK		GENMASK(23, DW_IC_SDA_HOLD_RX_SHIFT)
+
+#define DW_IC_ERR_TX_ABRT	0x1
+
+#define DW_IC_TAR_10BITADDR_MASTER BIT(12)
+
+#define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH	(BIT(2) | BIT(3))
+#define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK	GENMASK(3, 2)
+
+/*
+ * status codes
+ */
+#define STATUS_IDLE			0x0
+#define STATUS_WRITE_IN_PROGRESS	0x1
+#define STATUS_READ_IN_PROGRESS		0x2
+
+#define TIMEOUT			20 /* ms */
+
+/*
+ * operation modes
+ */
+#define DW_IC_MASTER		0
+#define DW_IC_SLAVE		1
+
+/*
+ * Hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
+ *
+ * Only expected abort codes are listed here
+ * refer to the datasheet for the full list
+ */
+#define ABRT_7B_ADDR_NOACK	0
+#define ABRT_10ADDR1_NOACK	1
+#define ABRT_10ADDR2_NOACK	2
+#define ABRT_TXDATA_NOACK	3
+#define ABRT_GCALL_NOACK	4
+#define ABRT_GCALL_READ		5
+#define ABRT_SBYTE_ACKDET	7
+#define ABRT_SBYTE_NORSTRT	9
+#define ABRT_10B_RD_NORSTRT	10
+#define ABRT_MASTER_DIS		11
+#define ARB_LOST		12
+#define ABRT_SLAVE_FLUSH_TXFIFO	13
+#define ABRT_SLAVE_ARBLOST	14
+#define ABRT_SLAVE_RD_INTX	15
+
+#define DW_IC_TX_ABRT_7B_ADDR_NOACK	(1UL << ABRT_7B_ADDR_NOACK)
+#define DW_IC_TX_ABRT_10ADDR1_NOACK	(1UL << ABRT_10ADDR1_NOACK)
+#define DW_IC_TX_ABRT_10ADDR2_NOACK	(1UL << ABRT_10ADDR2_NOACK)
+#define DW_IC_TX_ABRT_TXDATA_NOACK	(1UL << ABRT_TXDATA_NOACK)
+#define DW_IC_TX_ABRT_GCALL_NOACK	(1UL << ABRT_GCALL_NOACK)
+#define DW_IC_TX_ABRT_GCALL_READ	(1UL << ABRT_GCALL_READ)
+#define DW_IC_TX_ABRT_SBYTE_ACKDET	(1UL << ABRT_SBYTE_ACKDET)
+#define DW_IC_TX_ABRT_SBYTE_NORSTRT	(1UL << ABRT_SBYTE_NORSTRT)
+#define DW_IC_TX_ABRT_10B_RD_NORSTRT	(1UL << ABRT_10B_RD_NORSTRT)
+#define DW_IC_TX_ABRT_MASTER_DIS	(1UL << ABRT_MASTER_DIS)
+#define DW_IC_TX_ARB_LOST		(1UL << ARB_LOST)
+#define DW_IC_RX_ABRT_SLAVE_RD_INTX	(1UL << ABRT_SLAVE_RD_INTX)
+#define DW_IC_RX_ABRT_SLAVE_ARBLOST	(1UL << ABRT_SLAVE_ARBLOST)
+#define DW_IC_RX_ABRT_SLAVE_FLUSH_TXFIFO	(1UL << ABRT_SLAVE_FLUSH_TXFIFO)
+
+#define DW_IC_TX_ABRT_NOACK		(DW_IC_TX_ABRT_7B_ADDR_NOACK | \
+					 DW_IC_TX_ABRT_10ADDR1_NOACK | \
+					 DW_IC_TX_ABRT_10ADDR2_NOACK | \
+					 DW_IC_TX_ABRT_TXDATA_NOACK | \
+					 DW_IC_TX_ABRT_GCALL_NOACK)
 
 
 /**
@@ -48,8 +191,9 @@
  * @base: IO registers pointer
  * @cmd_complete: tx completion indicator
  * @clk: input reference clock
+ * @slave: represent an I2C slave device
  * @cmd_err: run time hadware error code
- * @msgs: points to an array of messages currently being transfered
+ * @msgs: points to an array of messages currently being transferred
  * @msgs_num: the number of elements in msgs
  * @msg_write_idx: the element index of the current tx message in the msgs
  *	array
@@ -64,6 +208,7 @@
  * @abort_source: copy of the TX_ABRT_SOURCE register
  * @irq: interrupt number for the i2c master
  * @adapter: i2c subsystem adapter node
+ * @slave_cfg: configuration for the slave device
  * @tx_fifo_depth: depth of the hardware tx fifo
  * @rx_fifo_depth: depth of the hardware rx fifo
  * @rx_outstanding: current master-rx elements in tx fifo
@@ -80,6 +225,10 @@
  * @acquire_lock: function to acquire a hardware lock on the bus
  * @release_lock: function to release a hardware lock on the bus
  * @pm_disabled: true if power-management should be disabled for this i2c-bus
+ * @disable: function to disable the controller
+ * @disable_int: function to disable all interrupts
+ * @init: function to initialize the I2C hardware
+ * @mode: operation mode - DW_IC_MASTER or DW_IC_SLAVE
  *
  * HCNT and LCNT parameters can be used if the platform knows more accurate
  * values than the one computed based only on the input clock frequency.
@@ -91,6 +240,7 @@ struct dw_i2c_dev {
 	struct completion	cmd_complete;
 	struct clk		*clk;
 	struct reset_control	*rst;
+	struct i2c_client		*slave;
 	u32			(*get_clk_rate_khz) (struct dw_i2c_dev *dev);
 	struct dw_pci_controller *controller;
 	int			cmd_err;
@@ -110,6 +260,7 @@ struct dw_i2c_dev {
 	struct i2c_adapter	adapter;
 	u32			functionality;
 	u32			master_cfg;
+	u32			slave_cfg;
 	unsigned int		tx_fifo_depth;
 	unsigned int		rx_fifo_depth;
 	int			rx_outstanding;
@@ -129,6 +280,10 @@ struct dw_i2c_dev {
 	int			(*acquire_lock)(struct dw_i2c_dev *dev);
 	void			(*release_lock)(struct dw_i2c_dev *dev);
 	bool			pm_disabled;
+	void			(*disable)(struct dw_i2c_dev *dev);
+	void			(*disable_int)(struct dw_i2c_dev *dev);
+	int			(*init)(struct dw_i2c_dev *dev);
+	int			mode;
 };
 
 #define ACCESS_SWAP		0x00000001
@@ -137,11 +292,28 @@ struct dw_i2c_dev {
 
 #define MODEL_CHERRYTRAIL	0x00000100
 
-extern int i2c_dw_init(struct dw_i2c_dev *dev);
-extern void i2c_dw_disable(struct dw_i2c_dev *dev);
-extern void i2c_dw_disable_int(struct dw_i2c_dev *dev);
+u32 dw_readl(struct dw_i2c_dev *dev, int offset);
+void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset);
+u32 i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset);
+u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset);
+void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable);
+void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable);
+unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev);
+int i2c_dw_acquire_lock(struct dw_i2c_dev *dev);
+void i2c_dw_release_lock(struct dw_i2c_dev *dev);
+int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev);
+int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev);
+u32 i2c_dw_func(struct i2c_adapter *adap);
+void i2c_dw_disable(struct dw_i2c_dev *dev);
+void i2c_dw_disable_int(struct dw_i2c_dev *dev);
+
 extern u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev);
 extern int i2c_dw_probe(struct dw_i2c_dev *dev);
+#if IS_ENABLED(CONFIG_I2C_DESIGNWARE_SLAVE)
+extern int i2c_dw_probe_slave(struct dw_i2c_dev *dev);
+#else
+static inline int i2c_dw_probe_slave(struct dw_i2c_dev *dev) { return -EINVAL; }
+#endif
 
 #if IS_ENABLED(CONFIG_I2C_DESIGNWARE_BAYTRAIL)
 extern int i2c_dw_probe_lock_support(struct dw_i2c_dev *dev);
diff --git a/drivers/i2c/busses/i2c-designware-core.c b/drivers/i2c/busses/i2c-designware-master.c
index c453717b753b..418c233075d3 100644
--- a/drivers/i2c/busses/i2c-designware-core.c
+++ b/drivers/i2c/busses/i2c-designware-master.c
@@ -21,311 +21,37 @@
  * ----------------------------------------------------------------------------
  *
  */
-#include <linux/export.h>
-#include <linux/errno.h>
+#include <linux/delay.h>
 #include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/export.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
-#include <linux/pm_runtime.h>
-#include <linux/delay.h>
 #include <linux/module.h>
-#include "i2c-designware-core.h"
-
-/*
- * Registers offset
- */
-#define DW_IC_CON		0x0
-#define DW_IC_TAR		0x4
-#define DW_IC_DATA_CMD		0x10
-#define DW_IC_SS_SCL_HCNT	0x14
-#define DW_IC_SS_SCL_LCNT	0x18
-#define DW_IC_FS_SCL_HCNT	0x1c
-#define DW_IC_FS_SCL_LCNT	0x20
-#define DW_IC_HS_SCL_HCNT	0x24
-#define DW_IC_HS_SCL_LCNT	0x28
-#define DW_IC_INTR_STAT		0x2c
-#define DW_IC_INTR_MASK		0x30
-#define DW_IC_RAW_INTR_STAT	0x34
-#define DW_IC_RX_TL		0x38
-#define DW_IC_TX_TL		0x3c
-#define DW_IC_CLR_INTR		0x40
-#define DW_IC_CLR_RX_UNDER	0x44
-#define DW_IC_CLR_RX_OVER	0x48
-#define DW_IC_CLR_TX_OVER	0x4c
-#define DW_IC_CLR_RD_REQ	0x50
-#define DW_IC_CLR_TX_ABRT	0x54
-#define DW_IC_CLR_RX_DONE	0x58
-#define DW_IC_CLR_ACTIVITY	0x5c
-#define DW_IC_CLR_STOP_DET	0x60
-#define DW_IC_CLR_START_DET	0x64
-#define DW_IC_CLR_GEN_CALL	0x68
-#define DW_IC_ENABLE		0x6c
-#define DW_IC_STATUS		0x70
-#define DW_IC_TXFLR		0x74
-#define DW_IC_RXFLR		0x78
-#define DW_IC_SDA_HOLD		0x7c
-#define DW_IC_TX_ABRT_SOURCE	0x80
-#define DW_IC_ENABLE_STATUS	0x9c
-#define DW_IC_COMP_PARAM_1	0xf4
-#define DW_IC_COMP_VERSION	0xf8
-#define DW_IC_SDA_HOLD_MIN_VERS	0x3131312A
-#define DW_IC_COMP_TYPE		0xfc
-#define DW_IC_COMP_TYPE_VALUE	0x44570140
-
-#define DW_IC_INTR_RX_UNDER	0x001
-#define DW_IC_INTR_RX_OVER	0x002
-#define DW_IC_INTR_RX_FULL	0x004
-#define DW_IC_INTR_TX_OVER	0x008
-#define DW_IC_INTR_TX_EMPTY	0x010
-#define DW_IC_INTR_RD_REQ	0x020
-#define DW_IC_INTR_TX_ABRT	0x040
-#define DW_IC_INTR_RX_DONE	0x080
-#define DW_IC_INTR_ACTIVITY	0x100
-#define DW_IC_INTR_STOP_DET	0x200
-#define DW_IC_INTR_START_DET	0x400
-#define DW_IC_INTR_GEN_CALL	0x800
-
-#define DW_IC_INTR_DEFAULT_MASK		(DW_IC_INTR_RX_FULL | \
-					 DW_IC_INTR_TX_EMPTY | \
-					 DW_IC_INTR_TX_ABRT | \
-					 DW_IC_INTR_STOP_DET)
-
-#define DW_IC_STATUS_ACTIVITY	0x1
-
-#define DW_IC_SDA_HOLD_RX_SHIFT		16
-#define DW_IC_SDA_HOLD_RX_MASK		GENMASK(23, DW_IC_SDA_HOLD_RX_SHIFT)
-
-#define DW_IC_ERR_TX_ABRT	0x1
-
-#define DW_IC_TAR_10BITADDR_MASTER BIT(12)
-
-#define DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH	(BIT(2) | BIT(3))
-#define DW_IC_COMP_PARAM_1_SPEED_MODE_MASK	GENMASK(3, 2)
-
-/*
- * status codes
- */
-#define STATUS_IDLE			0x0
-#define STATUS_WRITE_IN_PROGRESS	0x1
-#define STATUS_READ_IN_PROGRESS		0x2
-
-#define TIMEOUT			20 /* ms */
-
-/*
- * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
- *
- * only expected abort codes are listed here
- * refer to the datasheet for the full list
- */
-#define ABRT_7B_ADDR_NOACK	0
-#define ABRT_10ADDR1_NOACK	1
-#define ABRT_10ADDR2_NOACK	2
-#define ABRT_TXDATA_NOACK	3
-#define ABRT_GCALL_NOACK	4
-#define ABRT_GCALL_READ		5
-#define ABRT_SBYTE_ACKDET	7
-#define ABRT_SBYTE_NORSTRT	9
-#define ABRT_10B_RD_NORSTRT	10
-#define ABRT_MASTER_DIS		11
-#define ARB_LOST		12
-
-#define DW_IC_TX_ABRT_7B_ADDR_NOACK	(1UL << ABRT_7B_ADDR_NOACK)
-#define DW_IC_TX_ABRT_10ADDR1_NOACK	(1UL << ABRT_10ADDR1_NOACK)
-#define DW_IC_TX_ABRT_10ADDR2_NOACK	(1UL << ABRT_10ADDR2_NOACK)
-#define DW_IC_TX_ABRT_TXDATA_NOACK	(1UL << ABRT_TXDATA_NOACK)
-#define DW_IC_TX_ABRT_GCALL_NOACK	(1UL << ABRT_GCALL_NOACK)
-#define DW_IC_TX_ABRT_GCALL_READ	(1UL << ABRT_GCALL_READ)
-#define DW_IC_TX_ABRT_SBYTE_ACKDET	(1UL << ABRT_SBYTE_ACKDET)
-#define DW_IC_TX_ABRT_SBYTE_NORSTRT	(1UL << ABRT_SBYTE_NORSTRT)
-#define DW_IC_TX_ABRT_10B_RD_NORSTRT	(1UL << ABRT_10B_RD_NORSTRT)
-#define DW_IC_TX_ABRT_MASTER_DIS	(1UL << ABRT_MASTER_DIS)
-#define DW_IC_TX_ARB_LOST		(1UL << ARB_LOST)
-
-#define DW_IC_TX_ABRT_NOACK		(DW_IC_TX_ABRT_7B_ADDR_NOACK | \
-					 DW_IC_TX_ABRT_10ADDR1_NOACK | \
-					 DW_IC_TX_ABRT_10ADDR2_NOACK | \
-					 DW_IC_TX_ABRT_TXDATA_NOACK | \
-					 DW_IC_TX_ABRT_GCALL_NOACK)
-
-static char *abort_sources[] = {
-	[ABRT_7B_ADDR_NOACK] =
-		"slave address not acknowledged (7bit mode)",
-	[ABRT_10ADDR1_NOACK] =
-		"first address byte not acknowledged (10bit mode)",
-	[ABRT_10ADDR2_NOACK] =
-		"second address byte not acknowledged (10bit mode)",
-	[ABRT_TXDATA_NOACK] =
-		"data not acknowledged",
-	[ABRT_GCALL_NOACK] =
-		"no acknowledgement for a general call",
-	[ABRT_GCALL_READ] =
-		"read after general call",
-	[ABRT_SBYTE_ACKDET] =
-		"start byte acknowledged",
-	[ABRT_SBYTE_NORSTRT] =
-		"trying to send start byte when restart is disabled",
-	[ABRT_10B_RD_NORSTRT] =
-		"trying to read when restart is disabled (10bit mode)",
-	[ABRT_MASTER_DIS] =
-		"trying to use disabled adapter",
-	[ARB_LOST] =
-		"lost arbitration",
-};
-
-static u32 dw_readl(struct dw_i2c_dev *dev, int offset)
-{
-	u32 value;
-
-	if (dev->flags & ACCESS_16BIT)
-		value = readw_relaxed(dev->base + offset) |
-			(readw_relaxed(dev->base + offset + 2) << 16);
-	else
-		value = readl_relaxed(dev->base + offset);
-
-	if (dev->flags & ACCESS_SWAP)
-		return swab32(value);
-	else
-		return value;
-}
-
-static void dw_writel(struct dw_i2c_dev *dev, u32 b, int offset)
-{
-	if (dev->flags & ACCESS_SWAP)
-		b = swab32(b);
-
-	if (dev->flags & ACCESS_16BIT) {
-		writew_relaxed((u16)b, dev->base + offset);
-		writew_relaxed((u16)(b >> 16), dev->base + offset + 2);
-	} else {
-		writel_relaxed(b, dev->base + offset);
-	}
-}
-
-static u32
-i2c_dw_scl_hcnt(u32 ic_clk, u32 tSYMBOL, u32 tf, int cond, int offset)
-{
-	/*
-	 * DesignWare I2C core doesn't seem to have solid strategy to meet
-	 * the tHD;STA timing spec.  Configuring _HCNT based on tHIGH spec
-	 * will result in violation of the tHD;STA spec.
-	 */
-	if (cond)
-		/*
-		 * Conditional expression:
-		 *
-		 *   IC_[FS]S_SCL_HCNT + (1+4+3) >= IC_CLK * tHIGH
-		 *
-		 * This is based on the DW manuals, and represents an ideal
-		 * configuration.  The resulting I2C bus speed will be
-		 * faster than any of the others.
-		 *
-		 * If your hardware is free from tHD;STA issue, try this one.
-		 */
-		return (ic_clk * tSYMBOL + 500000) / 1000000 - 8 + offset;
-	else
-		/*
-		 * Conditional expression:
-		 *
-		 *   IC_[FS]S_SCL_HCNT + 3 >= IC_CLK * (tHD;STA + tf)
-		 *
-		 * This is just experimental rule; the tHD;STA period turned
-		 * out to be proportinal to (_HCNT + 3).  With this setting,
-		 * we could meet both tHIGH and tHD;STA timing specs.
-		 *
-		 * If unsure, you'd better to take this alternative.
-		 *
-		 * The reason why we need to take into account "tf" here,
-		 * is the same as described in i2c_dw_scl_lcnt().
-		 */
-		return (ic_clk * (tSYMBOL + tf) + 500000) / 1000000
-			- 3 + offset;
-}
-
-static u32 i2c_dw_scl_lcnt(u32 ic_clk, u32 tLOW, u32 tf, int offset)
-{
-	/*
-	 * Conditional expression:
-	 *
-	 *   IC_[FS]S_SCL_LCNT + 1 >= IC_CLK * (tLOW + tf)
-	 *
-	 * DW I2C core starts counting the SCL CNTs for the LOW period
-	 * of the SCL clock (tLOW) as soon as it pulls the SCL line.
-	 * In order to meet the tLOW timing spec, we need to take into
-	 * account the fall time of SCL signal (tf).  Default tf value
-	 * should be 0.3 us, for safety.
-	 */
-	return ((ic_clk * (tLOW + tf) + 500000) / 1000000) - 1 + offset;
-}
-
-static void __i2c_dw_enable(struct dw_i2c_dev *dev, bool enable)
-{
-	dw_writel(dev, enable, DW_IC_ENABLE);
-}
-
-static void __i2c_dw_enable_and_wait(struct dw_i2c_dev *dev, bool enable)
-{
-	int timeout = 100;
-
-	do {
-		__i2c_dw_enable(dev, enable);
-		if ((dw_readl(dev, DW_IC_ENABLE_STATUS) & 1) == enable)
-			return;
-
-		/*
-		 * Wait 10 times the signaling period of the highest I2C
-		 * transfer supported by the driver (for 400KHz this is
-		 * 25us) as described in the DesignWare I2C databook.
-		 */
-		usleep_range(25, 250);
-	} while (timeout--);
-
-	dev_warn(dev->dev, "timeout in %sabling adapter\n",
-		 enable ? "en" : "dis");
-}
+#include <linux/pm_runtime.h>
 
-static unsigned long i2c_dw_clk_rate(struct dw_i2c_dev *dev)
-{
-	/*
-	 * Clock is not necessary if we got LCNT/HCNT values directly from
-	 * the platform code.
-	 */
-	if (WARN_ON_ONCE(!dev->get_clk_rate_khz))
-		return 0;
-	return dev->get_clk_rate_khz(dev);
-}
+#include "i2c-designware-core.h"
 
-static int i2c_dw_acquire_lock(struct dw_i2c_dev *dev)
+static void i2c_dw_configure_fifo_master(struct dw_i2c_dev *dev)
 {
-	int ret;
-
-	if (!dev->acquire_lock)
-		return 0;
-
-	ret = dev->acquire_lock(dev);
-	if (!ret)
-		return 0;
-
-	dev_err(dev->dev, "couldn't acquire bus ownership\n");
-
-	return ret;
-}
+	/* Configure Tx/Rx FIFO threshold levels */
+	dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL);
+	dw_writel(dev, 0, DW_IC_RX_TL);
 
-static void i2c_dw_release_lock(struct dw_i2c_dev *dev)
-{
-	if (dev->release_lock)
-		dev->release_lock(dev);
+	/* Configure the I2C master */
+	dw_writel(dev, dev->master_cfg, DW_IC_CON);
 }
 
 /**
- * i2c_dw_init() - initialize the designware i2c master hardware
+ * i2c_dw_init() - Initialize the designware I2C master hardware
  * @dev: device private data
  *
  * This functions configures and enables the I2C master.
  * This function is called during I2C init function, and in case of timeout at
  * run time.
  */
-int i2c_dw_init(struct dw_i2c_dev *dev)
+static int i2c_dw_init_master(struct dw_i2c_dev *dev)
 {
 	u32 hcnt, lcnt;
 	u32 reg, comp_param1;
@@ -344,8 +70,8 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 		/* Configure register access mode 16bit */
 		dev->flags |= ACCESS_16BIT;
 	} else if (reg != DW_IC_COMP_TYPE_VALUE) {
-		dev_err(dev->dev, "Unknown Synopsys component type: "
-			"0x%08x\n", reg);
+		dev_err(dev->dev,
+			"Unknown Synopsys component type: 0x%08x\n", reg);
 		i2c_dw_release_lock(dev);
 		return -ENODEV;
 	}
@@ -355,7 +81,7 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 	/* Disable the adapter */
 	__i2c_dw_enable_and_wait(dev, false);
 
-	/* set standard and fast speed deviders for high/low periods */
+	/* Set standard and fast speed deviders for high/low periods */
 
 	sda_falling_time = dev->sda_falling_time ?: 300; /* ns */
 	scl_falling_time = dev->scl_falling_time ?: 300; /* ns */
@@ -440,37 +166,11 @@ int i2c_dw_init(struct dw_i2c_dev *dev)
 			"Hardware too old to adjust SDA hold time.\n");
 	}
 
-	/* Configure Tx/Rx FIFO threshold levels */
-	dw_writel(dev, dev->tx_fifo_depth / 2, DW_IC_TX_TL);
-	dw_writel(dev, 0, DW_IC_RX_TL);
-
-	/* configure the i2c master */
-	dw_writel(dev, dev->master_cfg , DW_IC_CON);
-
+	i2c_dw_configure_fifo_master(dev);
 	i2c_dw_release_lock(dev);
 
 	return 0;
 }
-EXPORT_SYMBOL_GPL(i2c_dw_init);
-
-/*
- * Waiting for bus not busy
- */
-static int i2c_dw_wait_bus_not_busy(struct dw_i2c_dev *dev)
-{
-	int timeout = TIMEOUT;
-
-	while (dw_readl(dev, DW_IC_STATUS) & DW_IC_STATUS_ACTIVITY) {
-		if (timeout <= 0) {
-			dev_warn(dev->dev, "timeout waiting for bus ready\n");
-			return -ETIMEDOUT;
-		}
-		timeout--;
-		usleep_range(1000, 1100);
-	}
-
-	return 0;
-}
 
 static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 {
@@ -480,7 +180,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 	/* Disable the adapter */
 	__i2c_dw_enable_and_wait(dev, false);
 
-	/* if the slave address is ten bit address, enable 10BITADDR */
+	/* If the slave address is ten bit address, enable 10BITADDR */
 	ic_con = dw_readl(dev, DW_IC_CON);
 	if (msgs[dev->msg_write_idx].flags & I2C_M_TEN) {
 		ic_con |= DW_IC_CON_10BITADDR_MASTER;
@@ -503,7 +203,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 	 */
 	dw_writel(dev, msgs[dev->msg_write_idx].addr | ic_tar, DW_IC_TAR);
 
-	/* enforce disabled interrupts (due to HW issues) */
+	/* Enforce disabled interrupts (due to HW issues) */
 	i2c_dw_disable_int(dev);
 
 	/* Enable the adapter */
@@ -511,7 +211,7 @@ static void i2c_dw_xfer_init(struct dw_i2c_dev *dev)
 
 	/* Clear and enable interrupts */
 	dw_readl(dev, DW_IC_CLR_INTR);
-	dw_writel(dev, DW_IC_INTR_DEFAULT_MASK, DW_IC_INTR_MASK);
+	dw_writel(dev, DW_IC_INTR_MASTER_MASK, DW_IC_INTR_MASK);
 }
 
 /*
@@ -531,15 +231,15 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 	u8 *buf = dev->tx_buf;
 	bool need_restart = false;
 
-	intr_mask = DW_IC_INTR_DEFAULT_MASK;
+	intr_mask = DW_IC_INTR_MASTER_MASK;
 
 	for (; dev->msg_write_idx < dev->msgs_num; dev->msg_write_idx++) {
 		u32 flags = msgs[dev->msg_write_idx].flags;
 
 		/*
-		 * if target address has changed, we need to
-		 * reprogram the target address in the i2c
-		 * adapter when we are done with this transfer
+		 * If target address has changed, we need to
+		 * reprogram the target address in the I2C
+		 * adapter when we are done with this transfer.
 		 */
 		if (msgs[dev->msg_write_idx].addr != addr) {
 			dev_err(dev->dev,
@@ -583,7 +283,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 			 */
 
 			/*
-			 * i2c-core.c always sets the buffer length of
+			 * i2c-core always sets the buffer length of
 			 * I2C_FUNC_SMBUS_BLOCK_DATA to 1. The length will
 			 * be adjusted when receiving the first byte.
 			 * Thus we can't stop the transaction here.
@@ -599,7 +299,7 @@ i2c_dw_xfer_msg(struct dw_i2c_dev *dev)
 
 			if (msgs[dev->msg_write_idx].flags & I2C_M_RD) {
 
-				/* avoid rx buffer overrun */
+				/* Avoid rx buffer overrun */
 				if (dev->rx_outstanding >= dev->rx_fifo_depth)
 					break;
 
@@ -704,31 +404,8 @@ i2c_dw_read(struct dw_i2c_dev *dev)
 	}
 }
 
-static int i2c_dw_handle_tx_abort(struct dw_i2c_dev *dev)
-{
-	unsigned long abort_source = dev->abort_source;
-	int i;
-
-	if (abort_source & DW_IC_TX_ABRT_NOACK) {
-		for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
-			dev_dbg(dev->dev,
-				"%s: %s\n", __func__, abort_sources[i]);
-		return -EREMOTEIO;
-	}
-
-	for_each_set_bit(i, &abort_source, ARRAY_SIZE(abort_sources))
-		dev_err(dev->dev, "%s: %s\n", __func__, abort_sources[i]);
-
-	if (abort_source & DW_IC_TX_ARB_LOST)
-		return -EAGAIN;
-	else if (abort_source & DW_IC_TX_ABRT_GCALL_READ)
-		return -EINVAL; /* wrong msgs[] data */
-	else
-		return -EIO;
-}
-
 /*
- * Prepare controller for a transaction and call i2c_dw_xfer_msg
+ * Prepare controller for a transaction and call i2c_dw_xfer_msg.
  */
 static int
 i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
@@ -759,14 +436,14 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 	if (ret < 0)
 		goto done;
 
-	/* start the transfers */
+	/* Start the transfers */
 	i2c_dw_xfer_init(dev);
 
-	/* wait for tx to complete */
+	/* Wait for tx to complete */
 	if (!wait_for_completion_timeout(&dev->cmd_complete, adap->timeout)) {
 		dev_err(dev->dev, "controller timed out\n");
 		/* i2c_dw_init implicitly disables the adapter */
-		i2c_dw_init(dev);
+		i2c_dw_init_master(dev);
 		ret = -ETIMEDOUT;
 		goto done;
 	}
@@ -786,7 +463,7 @@ i2c_dw_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[], int num)
 		goto done;
 	}
 
-	/* no error */
+	/* No error */
 	if (likely(!dev->cmd_err && !dev->status)) {
 		ret = num;
 		goto done;
@@ -814,15 +491,9 @@ done_nolock:
 	return ret;
 }
 
-static u32 i2c_dw_func(struct i2c_adapter *adap)
-{
-	struct dw_i2c_dev *dev = i2c_get_adapdata(adap);
-	return dev->functionality;
-}
-
 static const struct i2c_algorithm i2c_dw_algo = {
-	.master_xfer	= i2c_dw_xfer,
-	.functionality	= i2c_dw_func,
+	.master_xfer = i2c_dw_xfer,
+	.functionality = i2c_dw_func,
 };
 
 static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
@@ -881,29 +552,21 @@ static u32 i2c_dw_read_clear_intrbits(struct dw_i2c_dev *dev)
 }
 
 /*
- * Interrupt service routine. This gets called whenever an I2C interrupt
+ * Interrupt service routine. This gets called whenever an I2C master interrupt
  * occurs.
  */
-static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
+static int i2c_dw_irq_handler_master(struct dw_i2c_dev *dev)
 {
-	struct dw_i2c_dev *dev = dev_id;
-	u32 stat, enabled;
-
-	enabled = dw_readl(dev, DW_IC_ENABLE);
-	stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
-	dev_dbg(dev->dev, "%s: enabled=%#x stat=%#x\n", __func__, enabled, stat);
-	if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
-		return IRQ_NONE;
+	u32 stat;
 
 	stat = i2c_dw_read_clear_intrbits(dev);
-
 	if (stat & DW_IC_INTR_TX_ABRT) {
 		dev->cmd_err |= DW_IC_ERR_TX_ABRT;
 		dev->status = STATUS_IDLE;
 
 		/*
 		 * Anytime TX_ABRT is set, the contents of the tx/rx
-		 * buffers are flushed.  Make sure to skip them.
+		 * buffers are flushed. Make sure to skip them.
 		 */
 		dw_writel(dev, 0, DW_IC_INTR_MASK);
 		goto tx_aborted;
@@ -925,49 +588,46 @@ tx_aborted:
 	if ((stat & (DW_IC_INTR_TX_ABRT | DW_IC_INTR_STOP_DET)) || dev->msg_err)
 		complete(&dev->cmd_complete);
 	else if (unlikely(dev->flags & ACCESS_INTR_MASK)) {
-		/* workaround to trigger pending interrupt */
+		/* Workaround to trigger pending interrupt */
 		stat = dw_readl(dev, DW_IC_INTR_MASK);
 		i2c_dw_disable_int(dev);
 		dw_writel(dev, stat, DW_IC_INTR_MASK);
 	}
 
-	return IRQ_HANDLED;
+	return 0;
 }
 
-void i2c_dw_disable(struct dw_i2c_dev *dev)
+static irqreturn_t i2c_dw_isr(int this_irq, void *dev_id)
 {
-	/* Disable controller */
-	__i2c_dw_enable_and_wait(dev, false);
+	struct dw_i2c_dev *dev = dev_id;
+	u32 stat, enabled;
 
-	/* Disable all interupts */
-	dw_writel(dev, 0, DW_IC_INTR_MASK);
-	dw_readl(dev, DW_IC_CLR_INTR);
-}
-EXPORT_SYMBOL_GPL(i2c_dw_disable);
+	enabled = dw_readl(dev, DW_IC_ENABLE);
+	stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
+	dev_dbg(dev->dev, "enabled=%#x stat=%#x\n", enabled, stat);
+	if (!enabled || !(stat & ~DW_IC_INTR_ACTIVITY))
+		return IRQ_NONE;
 
-void i2c_dw_disable_int(struct dw_i2c_dev *dev)
-{
-	dw_writel(dev, 0, DW_IC_INTR_MASK);
-}
-EXPORT_SYMBOL_GPL(i2c_dw_disable_int);
+	i2c_dw_irq_handler_master(dev);
 
-u32 i2c_dw_read_comp_param(struct dw_i2c_dev *dev)
-{
-	return dw_readl(dev, DW_IC_COMP_PARAM_1);
+	return IRQ_HANDLED;
 }
-EXPORT_SYMBOL_GPL(i2c_dw_read_comp_param);
 
 int i2c_dw_probe(struct dw_i2c_dev *dev)
 {
 	struct i2c_adapter *adap = &dev->adapter;
 	unsigned long irq_flags;
-	int r;
+	int ret;
 
 	init_completion(&dev->cmd_complete);
 
-	r = i2c_dw_init(dev);
-	if (r)
-		return r;
+	dev->init = i2c_dw_init_master;
+	dev->disable = i2c_dw_disable;
+	dev->disable_int = i2c_dw_disable_int;
+
+	ret = dev->init(dev);
+	if (ret)
+		return ret;
 
 	snprintf(adap->name, sizeof(adap->name),
 		 "Synopsys DesignWare I2C adapter");
@@ -984,12 +644,12 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
 	}
 
 	i2c_dw_disable_int(dev);
-	r = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags,
-			     dev_name(dev->dev), dev);
-	if (r) {
+	ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr, irq_flags,
+			       dev_name(dev->dev), dev);
+	if (ret) {
 		dev_err(dev->dev, "failure requesting irq %i: %d\n",
-			dev->irq, r);
-		return r;
+			dev->irq, ret);
+		return ret;
 	}
 
 	/*
@@ -999,14 +659,14 @@ int i2c_dw_probe(struct dw_i2c_dev *dev)
 	 * registered I2C slaves that do I2C transfers in their probe.
 	 */
 	pm_runtime_get_noresume(dev->dev);
-	r = i2c_add_numbered_adapter(adap);
-	if (r)
-		dev_err(dev->dev, "failure adding adapter: %d\n", r);
+	ret = i2c_add_numbered_adapter(adap);
+	if (ret)
+		dev_err(dev->dev, "failure adding adapter: %d\n", ret);
 	pm_runtime_put_noidle(dev->dev);
 
-	return r;
+	return ret;
 }
 EXPORT_SYMBOL_GPL(i2c_dw_probe);
 
-MODULE_DESCRIPTION("Synopsys DesignWare I2C bus adapter core");
+MODULE_DESCRIPTION("Synopsys DesignWare I2C bus master adapter");
 MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/busses/i2c-designware-pcidrv.c b/drivers/i2c/busses/i2c-designware-pcidrv.c
index ed485b69b449..86e1bd0b82e9 100644
--- a/drivers/i2c/busses/i2c-designware-pcidrv.c
+++ b/drivers/i2c/busses/i2c-designware-pcidrv.c
@@ -187,16 +187,19 @@ static struct dw_pci_controller dw_pci_controllers[] = {
 static int i2c_dw_pci_suspend(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
+	struct dw_i2c_dev *i_dev = pci_get_drvdata(pdev);
+
+	i_dev->disable(i_dev);
 
-	i2c_dw_disable(pci_get_drvdata(pdev));
 	return 0;
 }
 
 static int i2c_dw_pci_resume(struct device *dev)
 {
 	struct pci_dev *pdev = to_pci_dev(dev);
+	struct dw_i2c_dev *i_dev = pci_get_drvdata(pdev);
 
-	return i2c_dw_init(pci_get_drvdata(pdev));
+	return i_dev->init(i_dev);
 }
 #endif
 
@@ -296,7 +299,7 @@ static void i2c_dw_pci_remove(struct pci_dev *pdev)
 {
 	struct dw_i2c_dev *dev = pci_get_drvdata(pdev);
 
-	i2c_dw_disable(dev);
+	dev->disable(dev);
 	pm_runtime_forbid(&pdev->dev);
 	pm_runtime_get_noresume(&pdev->dev);
 
diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c
index d1263b82d646..2ea6d0d25a01 100644
--- a/drivers/i2c/busses/i2c-designware-platdrv.c
+++ b/drivers/i2c/busses/i2c-designware-platdrv.c
@@ -1,5 +1,5 @@
 /*
- * Synopsys DesignWare I2C adapter driver (master only).
+ * Synopsys DesignWare I2C adapter driver.
  *
  * Based on the TI DAVINCI I2C adapter driver.
  *
@@ -21,27 +21,28 @@
  * ----------------------------------------------------------------------------
  *
  */
-#include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/acpi.h>
+#include <linux/clk-provider.h>
+#include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/dmi.h>
-#include <linux/i2c.h>
-#include <linux/clk.h>
-#include <linux/clk-provider.h>
-#include <linux/errno.h>
-#include <linux/sched.h>
 #include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
 #include <linux/of.h>
+#include <linux/platform_data/i2c-designware.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/pm_runtime.h>
 #include <linux/property.h>
-#include <linux/io.h>
 #include <linux/reset.h>
+#include <linux/sched.h>
 #include <linux/slab.h>
-#include <linux/acpi.h>
-#include <linux/platform_data/i2c-designware.h>
+
 #include "i2c-designware-core.h"
 
 static u32 i2c_dw_get_clk_rate_khz(struct dw_i2c_dev *dev)
@@ -171,6 +172,49 @@ static inline int dw_i2c_acpi_configure(struct platform_device *pdev)
 }
 #endif
 
+static void i2c_dw_configure_master(struct dw_i2c_dev *dev)
+{
+	dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
+
+	dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
+			  DW_IC_CON_RESTART_EN;
+
+	dev->mode = DW_IC_MASTER;
+
+	switch (dev->clk_freq) {
+	case 100000:
+		dev->master_cfg |= DW_IC_CON_SPEED_STD;
+		break;
+	case 3400000:
+		dev->master_cfg |= DW_IC_CON_SPEED_HIGH;
+		break;
+	default:
+		dev->master_cfg |= DW_IC_CON_SPEED_FAST;
+	}
+}
+
+static void i2c_dw_configure_slave(struct dw_i2c_dev *dev)
+{
+	dev->functionality = I2C_FUNC_SLAVE | DW_IC_DEFAULT_FUNCTIONALITY;
+
+	dev->slave_cfg = DW_IC_CON_RX_FIFO_FULL_HLD_CTRL |
+			 DW_IC_CON_RESTART_EN | DW_IC_CON_STOP_DET_IFADDRESSED |
+			 DW_IC_CON_SPEED_FAST;
+
+	dev->mode = DW_IC_SLAVE;
+
+	switch (dev->clk_freq) {
+	case 100000:
+		dev->slave_cfg |= DW_IC_CON_SPEED_STD;
+		break;
+	case 3400000:
+		dev->slave_cfg |= DW_IC_CON_SPEED_HIGH;
+		break;
+	default:
+		dev->slave_cfg |= DW_IC_CON_SPEED_FAST;
+	}
+}
+
 static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare)
 {
 	if (IS_ERR(i_dev->clk))
@@ -209,11 +253,11 @@ static void dw_i2c_set_fifo_size(struct dw_i2c_dev *dev, int id)
 static int dw_i2c_plat_probe(struct platform_device *pdev)
 {
 	struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev);
-	struct dw_i2c_dev *dev;
 	struct i2c_adapter *adap;
-	struct resource *mem;
-	int irq, r;
+	struct dw_i2c_dev *dev;
 	u32 acpi_speed, ht = 0;
+	struct resource *mem;
+	int irq, ret;
 
 	irq = platform_get_irq(pdev, 0);
 	if (irq < 0)
@@ -276,29 +320,18 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 	    && dev->clk_freq != 1000000 && dev->clk_freq != 3400000) {
 		dev_err(&pdev->dev,
 			"Only 100kHz, 400kHz, 1MHz and 3.4MHz supported");
-		r = -EINVAL;
+		ret = -EINVAL;
 		goto exit_reset;
 	}
 
-	r = i2c_dw_probe_lock_support(dev);
-	if (r)
+	ret = i2c_dw_probe_lock_support(dev);
+	if (ret)
 		goto exit_reset;
 
-	dev->functionality = I2C_FUNC_10BIT_ADDR | DW_IC_DEFAULT_FUNCTIONALITY;
-
-	dev->master_cfg = DW_IC_CON_MASTER | DW_IC_CON_SLAVE_DISABLE |
-			  DW_IC_CON_RESTART_EN;
-
-	switch (dev->clk_freq) {
-	case 100000:
-		dev->master_cfg |= DW_IC_CON_SPEED_STD;
-		break;
-	case 3400000:
-		dev->master_cfg |= DW_IC_CON_SPEED_HIGH;
-		break;
-	default:
-		dev->master_cfg |= DW_IC_CON_SPEED_FAST;
-	}
+	if (i2c_detect_slave_mode(&pdev->dev))
+		i2c_dw_configure_slave(dev);
+	else
+		i2c_dw_configure_master(dev);
 
 	dev->clk = devm_clk_get(&pdev->dev, NULL);
 	if (!i2c_dw_plat_prepare_clk(dev, true)) {
@@ -327,11 +360,15 @@ static int dw_i2c_plat_probe(struct platform_device *pdev)
 		pm_runtime_enable(&pdev->dev);
 	}
 
-	r = i2c_dw_probe(dev);
-	if (r)
+	if (dev->mode == DW_IC_SLAVE)
+		ret = i2c_dw_probe_slave(dev);
+	else
+		ret = i2c_dw_probe(dev);
+
+	if (ret)
 		goto exit_probe;
 
-	return r;
+	return ret;
 
 exit_probe:
 	if (!dev->pm_disabled)
@@ -339,7 +376,7 @@ exit_probe:
 exit_reset:
 	if (!IS_ERR_OR_NULL(dev->rst))
 		reset_control_assert(dev->rst);
-	return r;
+	return ret;
 }
 
 static int dw_i2c_plat_remove(struct platform_device *pdev)
@@ -350,7 +387,7 @@ static int dw_i2c_plat_remove(struct platform_device *pdev)
 
 	i2c_del_adapter(&dev->adapter);
 
-	i2c_dw_disable(dev);
+	dev->disable(dev);
 
 	pm_runtime_dont_use_autosuspend(&pdev->dev);
 	pm_runtime_put_sync(&pdev->dev);
@@ -394,7 +431,7 @@ static int dw_i2c_plat_suspend(struct device *dev)
 	struct platform_device *pdev = to_platform_device(dev);
 	struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
 
-	i2c_dw_disable(i_dev);
+	i_dev->disable(i_dev);
 	i2c_dw_plat_prepare_clk(i_dev, false);
 
 	return 0;
@@ -406,7 +443,7 @@ static int dw_i2c_plat_resume(struct device *dev)
 	struct dw_i2c_dev *i_dev = platform_get_drvdata(pdev);
 
 	i2c_dw_plat_prepare_clk(i_dev, true);
-	i2c_dw_init(i_dev);
+	i_dev->init(i_dev);
 
 	return 0;
 }
@@ -423,7 +460,7 @@ static const struct dev_pm_ops dw_i2c_dev_pm_ops = {
 #define DW_I2C_DEV_PMOPS NULL
 #endif
 
-/* work with hotplug and coldplug */
+/* Work with hotplug and coldplug */
 MODULE_ALIAS("platform:i2c_designware");
 
 static struct platform_driver dw_i2c_driver = {
diff --git a/drivers/i2c/busses/i2c-designware-slave.c b/drivers/i2c/busses/i2c-designware-slave.c
new file mode 100644
index 000000000000..0548c7ea578c
--- /dev/null
+++ b/drivers/i2c/busses/i2c-designware-slave.c
@@ -0,0 +1,393 @@
+/*
+ * Synopsys DesignWare I2C adapter driver (slave only).
+ *
+ * Based on the Synopsys DesignWare I2C adapter driver (master).
+ *
+ * Copyright (C) 2016 Synopsys Inc.
+ *
+ * ----------------------------------------------------------------------------
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ * ----------------------------------------------------------------------------
+ *
+ */
+#include <linux/delay.h>
+#include <linux/err.h>
+#include <linux/errno.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/pm_runtime.h>
+
+#include "i2c-designware-core.h"
+
+static void i2c_dw_configure_fifo_slave(struct dw_i2c_dev *dev)
+{
+	/* Configure Tx/Rx FIFO threshold levels. */
+	dw_writel(dev, 0, DW_IC_TX_TL);
+	dw_writel(dev, 0, DW_IC_RX_TL);
+
+	/* Configure the I2C slave. */
+	dw_writel(dev, dev->slave_cfg, DW_IC_CON);
+	dw_writel(dev, DW_IC_INTR_SLAVE_MASK, DW_IC_INTR_MASK);
+}
+
+/**
+ * i2c_dw_init_slave() - Initialize the designware i2c slave hardware
+ * @dev: device private data
+ *
+ * This function configures and enables the I2C in slave mode.
+ * This function is called during I2C init function, and in case of timeout at
+ * run time.
+ */
+static int i2c_dw_init_slave(struct dw_i2c_dev *dev)
+{
+	u32 sda_falling_time, scl_falling_time;
+	u32 reg, comp_param1;
+	u32 hcnt, lcnt;
+	int ret;
+
+	ret = i2c_dw_acquire_lock(dev);
+	if (ret)
+		return ret;
+
+	reg = dw_readl(dev, DW_IC_COMP_TYPE);
+	if (reg == ___constant_swab32(DW_IC_COMP_TYPE_VALUE)) {
+		/* Configure register endianness access. */
+		dev->flags |= ACCESS_SWAP;
+	} else if (reg == (DW_IC_COMP_TYPE_VALUE & 0x0000ffff)) {
+		/* Configure register access mode 16bit. */
+		dev->flags |= ACCESS_16BIT;
+	} else if (reg != DW_IC_COMP_TYPE_VALUE) {
+		dev_err(dev->dev,
+			"Unknown Synopsys component type: 0x%08x\n", reg);
+		i2c_dw_release_lock(dev);
+		return -ENODEV;
+	}
+
+	comp_param1 = dw_readl(dev, DW_IC_COMP_PARAM_1);
+
+	/* Disable the adapter. */
+	__i2c_dw_enable_and_wait(dev, false);
+
+	/* Set standard and fast speed deviders for high/low periods. */
+	sda_falling_time = dev->sda_falling_time ?: 300; /* ns */
+	scl_falling_time = dev->scl_falling_time ?: 300; /* ns */
+
+	/* Set SCL timing parameters for standard-mode. */
+	if (dev->ss_hcnt && dev->ss_lcnt) {
+		hcnt = dev->ss_hcnt;
+		lcnt = dev->ss_lcnt;
+	} else {
+		hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev),
+				       4000,	/* tHD;STA = tHIGH = 4.0 us */
+				       sda_falling_time,
+				       0,	/* 0: DW default, 1: Ideal */
+				       0);	/* No offset */
+		lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev),
+				       4700,	/* tLOW = 4.7 us */
+				       scl_falling_time,
+				       0);	/* No offset */
+	}
+	dw_writel(dev, hcnt, DW_IC_SS_SCL_HCNT);
+	dw_writel(dev, lcnt, DW_IC_SS_SCL_LCNT);
+	dev_dbg(dev->dev, "Standard-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
+
+	/* Set SCL timing parameters for fast-mode or fast-mode plus. */
+	if ((dev->clk_freq == 1000000) && dev->fp_hcnt && dev->fp_lcnt) {
+		hcnt = dev->fp_hcnt;
+		lcnt = dev->fp_lcnt;
+	} else if (dev->fs_hcnt && dev->fs_lcnt) {
+		hcnt = dev->fs_hcnt;
+		lcnt = dev->fs_lcnt;
+	} else {
+		hcnt = i2c_dw_scl_hcnt(i2c_dw_clk_rate(dev),
+				       600,	/* tHD;STA = tHIGH = 0.6 us */
+				       sda_falling_time,
+				       0,	/* 0: DW default, 1: Ideal */
+				       0);	/* No offset */
+		lcnt = i2c_dw_scl_lcnt(i2c_dw_clk_rate(dev),
+				       1300,	/* tLOW = 1.3 us */
+				       scl_falling_time,
+				       0);	/* No offset */
+	}
+	dw_writel(dev, hcnt, DW_IC_FS_SCL_HCNT);
+	dw_writel(dev, lcnt, DW_IC_FS_SCL_LCNT);
+	dev_dbg(dev->dev, "Fast-mode HCNT:LCNT = %d:%d\n", hcnt, lcnt);
+
+	if ((dev->slave_cfg & DW_IC_CON_SPEED_MASK) ==
+		DW_IC_CON_SPEED_HIGH) {
+		if ((comp_param1 & DW_IC_COMP_PARAM_1_SPEED_MODE_MASK)
+			!= DW_IC_COMP_PARAM_1_SPEED_MODE_HIGH) {
+			dev_err(dev->dev, "High Speed not supported!\n");
+			dev->slave_cfg &= ~DW_IC_CON_SPEED_MASK;
+			dev->slave_cfg |= DW_IC_CON_SPEED_FAST;
+		} else if (dev->hs_hcnt && dev->hs_lcnt) {
+			hcnt = dev->hs_hcnt;
+			lcnt = dev->hs_lcnt;
+			dw_writel(dev, hcnt, DW_IC_HS_SCL_HCNT);
+			dw_writel(dev, lcnt, DW_IC_HS_SCL_LCNT);
+			dev_dbg(dev->dev, "HighSpeed-mode HCNT:LCNT = %d:%d\n",
+				hcnt, lcnt);
+		}
+	}
+
+	/* Configure SDA Hold Time if required. */
+	reg = dw_readl(dev, DW_IC_COMP_VERSION);
+	if (reg >= DW_IC_SDA_HOLD_MIN_VERS) {
+		if (!dev->sda_hold_time) {
+			/* Keep previous hold time setting if no one set it. */
+			dev->sda_hold_time = dw_readl(dev, DW_IC_SDA_HOLD);
+		}
+		/*
+		 * Workaround for avoiding TX arbitration lost in case I2C
+		 * slave pulls SDA down "too quickly" after falling egde of
+		 * SCL by enabling non-zero SDA RX hold. Specification says it
+		 * extends incoming SDA low to high transition while SCL is
+		 * high but it apprears to help also above issue.
+		 */
+		if (!(dev->sda_hold_time & DW_IC_SDA_HOLD_RX_MASK))
+			dev->sda_hold_time |= 1 << DW_IC_SDA_HOLD_RX_SHIFT;
+		dw_writel(dev, dev->sda_hold_time, DW_IC_SDA_HOLD);
+	} else {
+		dev_warn(dev->dev,
+			 "Hardware too old to adjust SDA hold time.\n");
+	}
+
+	i2c_dw_configure_fifo_slave(dev);
+	i2c_dw_release_lock(dev);
+
+	return 0;
+}
+
+static int i2c_dw_reg_slave(struct i2c_client *slave)
+{
+	struct dw_i2c_dev *dev = i2c_get_adapdata(slave->adapter);
+
+	if (dev->slave)
+		return -EBUSY;
+	if (slave->flags & I2C_CLIENT_TEN)
+		return -EAFNOSUPPORT;
+	/*
+	 * Set slave address in the IC_SAR register,
+	 * the address to which the DW_apb_i2c responds.
+	 */
+	__i2c_dw_enable(dev, false);
+	dw_writel(dev, slave->addr, DW_IC_SAR);
+	dev->slave = slave;
+
+	__i2c_dw_enable(dev, true);
+
+	dev->cmd_err = 0;
+	dev->msg_write_idx = 0;
+	dev->msg_read_idx = 0;
+	dev->msg_err = 0;
+	dev->status = STATUS_IDLE;
+	dev->abort_source = 0;
+	dev->rx_outstanding = 0;
+
+	return 0;
+}
+
+static int i2c_dw_unreg_slave(struct i2c_client *slave)
+{
+	struct dw_i2c_dev *dev = i2c_get_adapdata(slave->adapter);
+
+	dev->disable_int(dev);
+	dev->disable(dev);
+	dev->slave = NULL;
+
+	return 0;
+}
+
+static u32 i2c_dw_read_clear_intrbits_slave(struct dw_i2c_dev *dev)
+{
+	u32 stat;
+
+	/*
+	 * The IC_INTR_STAT register just indicates "enabled" interrupts.
+	 * Ths unmasked raw version of interrupt status bits are available
+	 * in the IC_RAW_INTR_STAT register.
+	 *
+	 * That is,
+	 *   stat = dw_readl(IC_INTR_STAT);
+	 * equals to,
+	 *   stat = dw_readl(IC_RAW_INTR_STAT) & dw_readl(IC_INTR_MASK);
+	 *
+	 * The raw version might be useful for debugging purposes.
+	 */
+	stat = dw_readl(dev, DW_IC_INTR_STAT);
+
+	/*
+	 * Do not use the IC_CLR_INTR register to clear interrupts, or
+	 * you'll miss some interrupts, triggered during the period from
+	 * dw_readl(IC_INTR_STAT) to dw_readl(IC_CLR_INTR).
+	 *
+	 * Instead, use the separately-prepared IC_CLR_* registers.
+	 */
+	if (stat & DW_IC_INTR_TX_ABRT)
+		dw_readl(dev, DW_IC_CLR_TX_ABRT);
+	if (stat & DW_IC_INTR_RX_UNDER)
+		dw_readl(dev, DW_IC_CLR_RX_UNDER);
+	if (stat & DW_IC_INTR_RX_OVER)
+		dw_readl(dev, DW_IC_CLR_RX_OVER);
+	if (stat & DW_IC_INTR_TX_OVER)
+		dw_readl(dev, DW_IC_CLR_TX_OVER);
+	if (stat & DW_IC_INTR_RX_DONE)
+		dw_readl(dev, DW_IC_CLR_RX_DONE);
+	if (stat & DW_IC_INTR_ACTIVITY)
+		dw_readl(dev, DW_IC_CLR_ACTIVITY);
+	if (stat & DW_IC_INTR_STOP_DET)
+		dw_readl(dev, DW_IC_CLR_STOP_DET);
+	if (stat & DW_IC_INTR_START_DET)
+		dw_readl(dev, DW_IC_CLR_START_DET);
+	if (stat & DW_IC_INTR_GEN_CALL)
+		dw_readl(dev, DW_IC_CLR_GEN_CALL);
+
+	return stat;
+}
+
+/*
+ * Interrupt service routine. This gets called whenever an I2C slave interrupt
+ * occurs.
+ */
+
+static int i2c_dw_irq_handler_slave(struct dw_i2c_dev *dev)
+{
+	u32 raw_stat, stat, enabled;
+	u8 val, slave_activity;
+
+	stat = dw_readl(dev, DW_IC_INTR_STAT);
+	enabled = dw_readl(dev, DW_IC_ENABLE);
+	raw_stat = dw_readl(dev, DW_IC_RAW_INTR_STAT);
+	slave_activity = ((dw_readl(dev, DW_IC_STATUS) &
+		DW_IC_STATUS_SLAVE_ACTIVITY) >> 6);
+
+	if (!enabled || !(raw_stat & ~DW_IC_INTR_ACTIVITY))
+		return 0;
+
+	dev_dbg(dev->dev,
+		"%#x STATUS SLAVE_ACTIVITY=%#x : RAW_INTR_STAT=%#x : INTR_STAT=%#x\n",
+		enabled, slave_activity, raw_stat, stat);
+
+	if ((stat & DW_IC_INTR_RX_FULL) && (stat & DW_IC_INTR_STOP_DET))
+		i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_REQUESTED, &val);
+
+	if (stat & DW_IC_INTR_RD_REQ) {
+		if (slave_activity) {
+			if (stat & DW_IC_INTR_RX_FULL) {
+				val = dw_readl(dev, DW_IC_DATA_CMD);
+
+				if (!i2c_slave_event(dev->slave,
+						     I2C_SLAVE_WRITE_RECEIVED,
+						     &val)) {
+					dev_vdbg(dev->dev, "Byte %X acked!",
+						 val);
+				}
+				dw_readl(dev, DW_IC_CLR_RD_REQ);
+				stat = i2c_dw_read_clear_intrbits_slave(dev);
+			} else {
+				dw_readl(dev, DW_IC_CLR_RD_REQ);
+				dw_readl(dev, DW_IC_CLR_RX_UNDER);
+				stat = i2c_dw_read_clear_intrbits_slave(dev);
+			}
+			if (!i2c_slave_event(dev->slave,
+					     I2C_SLAVE_READ_REQUESTED,
+					     &val))
+				dw_writel(dev, val, DW_IC_DATA_CMD);
+		}
+	}
+
+	if (stat & DW_IC_INTR_RX_DONE) {
+		if (!i2c_slave_event(dev->slave, I2C_SLAVE_READ_PROCESSED,
+				     &val))
+			dw_readl(dev, DW_IC_CLR_RX_DONE);
+
+		i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
+		stat = i2c_dw_read_clear_intrbits_slave(dev);
+		return 1;
+	}
+
+	if (stat & DW_IC_INTR_RX_FULL) {
+		val = dw_readl(dev, DW_IC_DATA_CMD);
+		if (!i2c_slave_event(dev->slave, I2C_SLAVE_WRITE_RECEIVED,
+				     &val))
+			dev_vdbg(dev->dev, "Byte %X acked!", val);
+	} else {
+		i2c_slave_event(dev->slave, I2C_SLAVE_STOP, &val);
+		stat = i2c_dw_read_clear_intrbits_slave(dev);
+	}
+
+	return 1;
+}
+
+static irqreturn_t i2c_dw_isr_slave(int this_irq, void *dev_id)
+{
+	struct dw_i2c_dev *dev = dev_id;
+	int ret;
+
+	i2c_dw_read_clear_intrbits_slave(dev);
+	ret = i2c_dw_irq_handler_slave(dev);
+	if (ret > 0)
+		complete(&dev->cmd_complete);
+
+	return IRQ_RETVAL(ret);
+}
+
+static struct i2c_algorithm i2c_dw_algo = {
+	.functionality = i2c_dw_func,
+	.reg_slave = i2c_dw_reg_slave,
+	.unreg_slave = i2c_dw_unreg_slave,
+};
+
+int i2c_dw_probe_slave(struct dw_i2c_dev *dev)
+{
+	struct i2c_adapter *adap = &dev->adapter;
+	int ret;
+
+	init_completion(&dev->cmd_complete);
+
+	dev->init = i2c_dw_init_slave;
+	dev->disable = i2c_dw_disable;
+	dev->disable_int = i2c_dw_disable_int;
+
+	ret = dev->init(dev);
+	if (ret)
+		return ret;
+
+	snprintf(adap->name, sizeof(adap->name),
+		 "Synopsys DesignWare I2C Slave adapter");
+	adap->retries = 3;
+	adap->algo = &i2c_dw_algo;
+	adap->dev.parent = dev->dev;
+	i2c_set_adapdata(adap, dev);
+
+	ret = devm_request_irq(dev->dev, dev->irq, i2c_dw_isr_slave,
+			       IRQF_SHARED, dev_name(dev->dev), dev);
+	if (ret) {
+		dev_err(dev->dev, "failure requesting irq %i: %d\n",
+			dev->irq, ret);
+		return ret;
+	}
+
+	ret = i2c_add_numbered_adapter(adap);
+	if (ret)
+		dev_err(dev->dev, "failure adding adapter: %d\n", ret);
+	pm_runtime_put_noidle(dev->dev);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_dw_probe_slave);
+
+MODULE_AUTHOR("Luis Oliveira <lolivei@synopsys.com>");
+MODULE_DESCRIPTION("Synopsys DesignWare I2C bus slave adapter");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/busses/i2c-emev2.c b/drivers/i2c/busses/i2c-emev2.c
index 312912708854..d2e84480fbe9 100644
--- a/drivers/i2c/busses/i2c-emev2.c
+++ b/drivers/i2c/busses/i2c-emev2.c
@@ -375,7 +375,9 @@ static int em_i2c_probe(struct platform_device *pdev)
 	if (IS_ERR(priv->sclk))
 		return PTR_ERR(priv->sclk);
 
-	clk_prepare_enable(priv->sclk);
+	ret = clk_prepare_enable(priv->sclk);
+	if (ret)
+		return ret;
 
 	priv->adap.timeout = msecs_to_jiffies(100);
 	priv->adap.retries = 5;
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 6484fa6dbb84..c9536e17d6ff 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -66,6 +66,8 @@
  * Lewisburg Supersku (PCH)	0xa223	32	hard	yes	yes	yes
  * Kaby Lake PCH-H (PCH)	0xa2a3	32	hard	yes	yes	yes
  * Gemini Lake (SOC)		0x31d4	32	hard	yes	yes	yes
+ * Cannon Lake-H (PCH)		0xa323	32	hard	yes	yes	yes
+ * Cannon Lake-LP (PCH)		0x9da3	32	hard	yes	yes	yes
  *
  * Features supported by this driver:
  * Software PEC				no
@@ -226,10 +228,12 @@
 #define PCI_DEVICE_ID_INTEL_LYNXPOINT_LP_SMBUS		0x9c22
 #define PCI_DEVICE_ID_INTEL_WILDCATPOINT_LP_SMBUS	0x9ca2
 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS	0x9d23
+#define PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS		0x9da3
 #define PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS	0xa123
 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS		0xa1a3
 #define PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS	0xa223
 #define PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS	0xa2a3
+#define PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS		0xa323
 
 struct i801_mux_config {
 	char *gpio_chip;
@@ -1026,6 +1030,8 @@ static const struct pci_device_id i801_ids[] = {
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS) },
 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_KABYLAKE_PCH_H_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS) },
+	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS) },
 	{ 0, }
 };
 
@@ -1499,6 +1505,8 @@ static int i801_probe(struct pci_dev *dev, const struct pci_device_id *id)
 	switch (dev->device) {
 	case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_H_SMBUS:
 	case PCI_DEVICE_ID_INTEL_SUNRISEPOINT_LP_SMBUS:
+	case PCI_DEVICE_ID_INTEL_CANNONLAKE_H_SMBUS:
+	case PCI_DEVICE_ID_INTEL_CANNONLAKE_LP_SMBUS:
 	case PCI_DEVICE_ID_INTEL_LEWISBURG_SMBUS:
 	case PCI_DEVICE_ID_INTEL_LEWISBURG_SSKU_SMBUS:
 	case PCI_DEVICE_ID_INTEL_DNV_SMBUS:
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 5738556b6aac..d4e8f1954f23 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -419,7 +419,7 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap,
 
 		ret = mxs_i2c_pio_wait_xfer_end(i2c);
 		if (ret) {
-			dev_err(i2c->dev,
+			dev_dbg(i2c->dev,
 				"PIO: Failed to send SELECT command!\n");
 			goto cleanup;
 		}
@@ -431,7 +431,7 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap,
 
 		ret = mxs_i2c_pio_wait_xfer_end(i2c);
 		if (ret) {
-			dev_err(i2c->dev,
+			dev_dbg(i2c->dev,
 				"PIO: Failed to send READ command!\n");
 			goto cleanup;
 		}
@@ -528,7 +528,7 @@ static int mxs_i2c_pio_setup_xfer(struct i2c_adapter *adap,
 			/* Wait for the end of the transfer. */
 			ret = mxs_i2c_pio_wait_xfer_end(i2c);
 			if (ret) {
-				dev_err(i2c->dev,
+				dev_dbg(i2c->dev,
 					"PIO: Failed to finish WRITE cmd!\n");
 				break;
 			}
diff --git a/drivers/i2c/busses/i2c-pca-platform.c b/drivers/i2c/busses/i2c-pca-platform.c
index 3bd2e7d06e4b..853a2abedb05 100644
--- a/drivers/i2c/busses/i2c-pca-platform.c
+++ b/drivers/i2c/busses/i2c-pca-platform.c
@@ -22,14 +22,17 @@
 #include <linux/i2c-algo-pca.h>
 #include <linux/i2c-pca-platform.h>
 #include <linux/gpio.h>
+#include <linux/gpio/consumer.h>
 #include <linux/io.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
 
 #include <asm/irq.h>
 
 struct i2c_pca_pf_data {
 	void __iomem			*reg_base;
 	int				irq;	/* if 0, use polling */
-	int				gpio;
+	struct gpio_desc		*gpio;
 	wait_queue_head_t		wait;
 	struct i2c_adapter		adap;
 	struct i2c_algo_pca_data	algo_data;
@@ -104,17 +107,17 @@ static int i2c_pca_pf_waitforcompletion(void *pd)
 static void i2c_pca_pf_dummyreset(void *pd)
 {
 	struct i2c_pca_pf_data *i2c = pd;
-	printk(KERN_WARNING "%s: No reset-pin found. Chip may get stuck!\n",
-		i2c->adap.name);
+
+	dev_warn(&i2c->adap.dev, "No reset-pin found. Chip may get stuck!\n");
 }
 
 static void i2c_pca_pf_resetchip(void *pd)
 {
 	struct i2c_pca_pf_data *i2c = pd;
 
-	gpio_set_value(i2c->gpio, 0);
+	gpiod_set_value(i2c->gpio, 1);
 	ndelay(100);
-	gpio_set_value(i2c->gpio, 1);
+	gpiod_set_value(i2c->gpio, 0);
 }
 
 static irqreturn_t i2c_pca_pf_handler(int this_irq, void *dev_id)
@@ -136,36 +139,27 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
 	struct resource *res;
 	struct i2c_pca9564_pf_platform_data *platform_data =
 				dev_get_platdata(&pdev->dev);
+	struct device_node *np = pdev->dev.of_node;
 	int ret = 0;
 	int irq;
 
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
 	irq = platform_get_irq(pdev, 0);
 	/* If irq is 0, we do polling. */
+	if (irq < 0)
+		irq = 0;
 
-	if (res == NULL) {
-		ret = -ENODEV;
-		goto e_print;
-	}
+	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
 
-	if (!request_mem_region(res->start, resource_size(res), res->name)) {
-		ret = -ENOMEM;
-		goto e_print;
-	}
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	i2c->reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(i2c->reg_base))
+		return PTR_ERR(i2c->reg_base);
 
-	i2c = kzalloc(sizeof(struct i2c_pca_pf_data), GFP_KERNEL);
-	if (!i2c) {
-		ret = -ENOMEM;
-		goto e_alloc;
-	}
 
 	init_waitqueue_head(&i2c->wait);
 
-	i2c->reg_base = ioremap(res->start, resource_size(res));
-	if (!i2c->reg_base) {
-		ret = -ENOMEM;
-		goto e_remap;
-	}
 	i2c->io_base = res->start;
 	i2c->io_size = resource_size(res);
 	i2c->irq = irq;
@@ -177,20 +171,43 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
 		 (unsigned long) res->start);
 	i2c->adap.algo_data = &i2c->algo_data;
 	i2c->adap.dev.parent = &pdev->dev;
+	i2c->adap.dev.of_node = np;
 
 	if (platform_data) {
 		i2c->adap.timeout = platform_data->timeout;
 		i2c->algo_data.i2c_clock = platform_data->i2c_clock_speed;
-		i2c->gpio = platform_data->gpio;
+		if (gpio_is_valid(platform_data->gpio)) {
+			ret = devm_gpio_request_one(&pdev->dev,
+						    platform_data->gpio,
+						    GPIOF_ACTIVE_LOW,
+						    i2c->adap.name);
+			if (ret == 0) {
+				i2c->gpio = gpio_to_desc(platform_data->gpio);
+				gpiod_direction_output(i2c->gpio, 0);
+			} else {
+				dev_warn(&pdev->dev, "Registering gpio failed!\n");
+				i2c->gpio = NULL;
+			}
+		}
+	} else if (np) {
+		i2c->adap.timeout = HZ;
+		i2c->gpio = devm_gpiod_get_optional(&pdev->dev, "reset-gpios", GPIOD_OUT_LOW);
+		if (IS_ERR(i2c->gpio))
+			return PTR_ERR(i2c->gpio);
+		of_property_read_u32_index(np, "clock-frequency", 0,
+					   &i2c->algo_data.i2c_clock);
 	} else {
 		i2c->adap.timeout = HZ;
 		i2c->algo_data.i2c_clock = 59000;
-		i2c->gpio = -1;
+		i2c->gpio = NULL;
 	}
 
 	i2c->algo_data.data = i2c;
 	i2c->algo_data.wait_for_completion = i2c_pca_pf_waitforcompletion;
-	i2c->algo_data.reset_chip = i2c_pca_pf_dummyreset;
+	if (i2c->gpio)
+		i2c->algo_data.reset_chip = i2c_pca_pf_resetchip;
+	else
+		i2c->algo_data.reset_chip = i2c_pca_pf_dummyreset;
 
 	switch (res->flags & IORESOURCE_MEM_TYPE_MASK) {
 	case IORESOURCE_MEM_32BIT:
@@ -208,52 +225,22 @@ static int i2c_pca_pf_probe(struct platform_device *pdev)
 		break;
 	}
 
-	/* Use gpio_is_valid() when in mainline */
-	if (i2c->gpio > -1) {
-		ret = gpio_request(i2c->gpio, i2c->adap.name);
-		if (ret == 0) {
-			gpio_direction_output(i2c->gpio, 1);
-			i2c->algo_data.reset_chip = i2c_pca_pf_resetchip;
-		} else {
-			printk(KERN_WARNING "%s: Registering gpio failed!\n",
-				i2c->adap.name);
-			i2c->gpio = ret;
-		}
-	}
-
 	if (irq) {
-		ret = request_irq(irq, i2c_pca_pf_handler,
+		ret = devm_request_irq(&pdev->dev, irq, i2c_pca_pf_handler,
 			IRQF_TRIGGER_FALLING, pdev->name, i2c);
 		if (ret)
-			goto e_reqirq;
+			return ret;
 	}
 
-	if (i2c_pca_add_numbered_bus(&i2c->adap) < 0) {
-		ret = -ENODEV;
-		goto e_adapt;
-	}
+	ret = i2c_pca_add_numbered_bus(&i2c->adap);
+	if (ret)
+		return ret;
 
 	platform_set_drvdata(pdev, i2c);
 
-	printk(KERN_INFO "%s registered.\n", i2c->adap.name);
+	dev_info(&pdev->dev, "registered.\n");
 
 	return 0;
-
-e_adapt:
-	if (irq)
-		free_irq(irq, i2c);
-e_reqirq:
-	if (i2c->gpio > -1)
-		gpio_free(i2c->gpio);
-
-	iounmap(i2c->reg_base);
-e_remap:
-	kfree(i2c);
-e_alloc:
-	release_mem_region(res->start, resource_size(res));
-e_print:
-	printk(KERN_ERR "Registering PCA9564/PCA9665 FAILED! (%d)\n", ret);
-	return ret;
 }
 
 static int i2c_pca_pf_remove(struct platform_device *pdev)
@@ -262,24 +249,24 @@ static int i2c_pca_pf_remove(struct platform_device *pdev)
 
 	i2c_del_adapter(&i2c->adap);
 
-	if (i2c->irq)
-		free_irq(i2c->irq, i2c);
-
-	if (i2c->gpio > -1)
-		gpio_free(i2c->gpio);
-
-	iounmap(i2c->reg_base);
-	release_mem_region(i2c->io_base, i2c->io_size);
-	kfree(i2c);
-
 	return 0;
 }
 
+#ifdef CONFIG_OF
+static const struct of_device_id i2c_pca_of_match_table[] = {
+	{ .compatible = "nxp,pca9564" },
+	{ .compatible = "nxp,pca9665" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, i2c_pca_of_match_table);
+#endif
+
 static struct platform_driver i2c_pca_pf_driver = {
 	.probe = i2c_pca_pf_probe,
 	.remove = i2c_pca_pf_remove,
 	.driver = {
 		.name = "i2c-pca-platform",
+		.of_match_table = of_match_ptr(i2c_pca_of_match_table),
 	},
 };
 
diff --git a/drivers/i2c/busses/i2c-rcar.c b/drivers/i2c/busses/i2c-rcar.c
index 8be3e6cb8fe6..93c1a54981df 100644
--- a/drivers/i2c/busses/i2c-rcar.c
+++ b/drivers/i2c/busses/i2c-rcar.c
@@ -1,5 +1,5 @@
 /*
- * Driver for the Renesas RCar I2C unit
+ * Driver for the Renesas R-Car I2C unit
  *
  * Copyright (C) 2014-15 Wolfram Sang <wsa@sang-engineering.com>
  * Copyright (C) 2011-2015 Renesas Electronics Corporation
@@ -783,7 +783,12 @@ static int rcar_unreg_slave(struct i2c_client *slave)
 
 static u32 rcar_i2c_func(struct i2c_adapter *adap)
 {
-	/* This HW can't do SMBUS_QUICK and NOSTART */
+	/*
+	 * This HW can't do:
+	 * I2C_SMBUS_QUICK (setting FSB during START didn't work)
+	 * I2C_M_NOSTART (automatically sends address after START)
+	 * I2C_M_IGNORE_NAK (automatically sends STOP after NAK)
+	 */
 	return I2C_FUNC_I2C | I2C_FUNC_SLAVE |
 		(I2C_FUNC_SMBUS_EMUL & ~I2C_FUNC_SMBUS_QUICK);
 }
diff --git a/drivers/i2c/busses/i2c-sh_mobile.c b/drivers/i2c/busses/i2c-sh_mobile.c
index 3d7559348745..2e097d97d258 100644
--- a/drivers/i2c/busses/i2c-sh_mobile.c
+++ b/drivers/i2c/busses/i2c-sh_mobile.c
@@ -24,7 +24,6 @@
 #include <linux/dma-mapping.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
-#include <linux/i2c/i2c-sh_mobile.h>
 #include <linux/init.h>
 #include <linux/interrupt.h>
 #include <linux/io.h>
@@ -879,10 +878,10 @@ static int sh_mobile_i2c_hook_irqs(struct platform_device *dev, struct sh_mobile
 
 static int sh_mobile_i2c_probe(struct platform_device *dev)
 {
-	struct i2c_sh_mobile_platform_data *pdata = dev_get_platdata(&dev->dev);
 	struct sh_mobile_i2c_data *pd;
 	struct i2c_adapter *adap;
 	struct resource *res;
+	const struct of_device_id *match;
 	int ret;
 	u32 bus_speed;
 
@@ -910,30 +909,18 @@ static int sh_mobile_i2c_probe(struct platform_device *dev)
 	if (IS_ERR(pd->reg))
 		return PTR_ERR(pd->reg);
 
-	/* Use platform data bus speed or STANDARD_MODE */
 	ret = of_property_read_u32(dev->dev.of_node, "clock-frequency", &bus_speed);
 	pd->bus_speed = ret ? STANDARD_MODE : bus_speed;
-
 	pd->clks_per_count = 1;
 
-	if (dev->dev.of_node) {
-		const struct of_device_id *match;
-
-		match = of_match_device(sh_mobile_i2c_dt_ids, &dev->dev);
-		if (match) {
-			const struct sh_mobile_dt_config *config;
+	match = of_match_device(sh_mobile_i2c_dt_ids, &dev->dev);
+	if (match) {
+		const struct sh_mobile_dt_config *config = match->data;
 
-			config = match->data;
-			pd->clks_per_count = config->clks_per_count;
+		pd->clks_per_count = config->clks_per_count;
 
-			if (config->setup)
-				config->setup(pd);
-		}
-	} else {
-		if (pdata && pdata->bus_speed)
-			pd->bus_speed = pdata->bus_speed;
-		if (pdata && pdata->clks_per_count)
-			pd->clks_per_count = pdata->clks_per_count;
+		if (config->setup)
+			config->setup(pd);
 	}
 
 	/* The IIC blocks on SH-Mobile ARM processors
diff --git a/drivers/i2c/busses/i2c-xgene-slimpro.c b/drivers/i2c/busses/i2c-xgene-slimpro.c
index 6ba6c83ca8f1..7e89ba6fcf6f 100644
--- a/drivers/i2c/busses/i2c-xgene-slimpro.c
+++ b/drivers/i2c/busses/i2c-xgene-slimpro.c
@@ -22,10 +22,12 @@
  * using the APM X-Gene SLIMpro mailbox driver.
  *
  */
+#include <acpi/pcc.h>
 #include <linux/acpi.h>
 #include <linux/dma-mapping.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
+#include <linux/io.h>
 #include <linux/mailbox_client.h>
 #include <linux/module.h>
 #include <linux/of.h>
@@ -89,6 +91,8 @@
 	((addrlen << SLIMPRO_IIC_ADDRLEN_SHIFT) & SLIMPRO_IIC_ADDRLEN_MASK) | \
 	((datalen << SLIMPRO_IIC_DATALEN_SHIFT) & SLIMPRO_IIC_DATALEN_MASK))
 
+#define SLIMPRO_MSG_TYPE(v)             (((v) & 0xF0000000) >> 28)
+
 /*
  * Encode for upper address for block data
  */
@@ -99,19 +103,47 @@
 								& 0x3FF00000))
 #define SLIMPRO_IIC_ENCODE_ADDR(a)			((a) & 0x000FFFFF)
 
+#define SLIMPRO_IIC_MSG_DWORD_COUNT			3
+
+/* PCC related defines */
+#define PCC_SIGNATURE			0x50424300
+#define PCC_STS_CMD_COMPLETE		BIT(0)
+#define PCC_STS_SCI_DOORBELL		BIT(1)
+#define PCC_STS_ERR			BIT(2)
+#define PCC_STS_PLAT_NOTIFY		BIT(3)
+#define PCC_CMD_GENERATE_DB_INT		BIT(15)
+
 struct slimpro_i2c_dev {
 	struct i2c_adapter adapter;
 	struct device *dev;
 	struct mbox_chan *mbox_chan;
 	struct mbox_client mbox_client;
+	int mbox_idx;
 	struct completion rd_complete;
 	u8 dma_buffer[I2C_SMBUS_BLOCK_MAX + 1]; /* dma_buffer[0] is used for length */
 	u32 *resp_msg;
+	phys_addr_t comm_base_addr;
+	void *pcc_comm_addr;
 };
 
 #define to_slimpro_i2c_dev(cl)	\
 		container_of(cl, struct slimpro_i2c_dev, mbox_client)
 
+/*
+ * This function tests and clears a bitmask then returns its old value
+ */
+static u16 xgene_word_tst_and_clr(u16 *addr, u16 mask)
+{
+	u16 ret, val;
+
+	val = le16_to_cpu(READ_ONCE(*addr));
+	ret = val & mask;
+	val &= ~mask;
+	WRITE_ONCE(*addr, cpu_to_le16(val));
+
+	return ret;
+}
+
 static void slimpro_i2c_rx_cb(struct mbox_client *cl, void *mssg)
 {
 	struct slimpro_i2c_dev *ctx = to_slimpro_i2c_dev(cl);
@@ -129,9 +161,53 @@ static void slimpro_i2c_rx_cb(struct mbox_client *cl, void *mssg)
 		complete(&ctx->rd_complete);
 }
 
+static void slimpro_i2c_pcc_rx_cb(struct mbox_client *cl, void *msg)
+{
+	struct slimpro_i2c_dev *ctx = to_slimpro_i2c_dev(cl);
+	struct acpi_pcct_shared_memory *generic_comm_base = ctx->pcc_comm_addr;
+
+	/* Check if platform sends interrupt */
+	if (!xgene_word_tst_and_clr(&generic_comm_base->status,
+				    PCC_STS_SCI_DOORBELL))
+		return;
+
+	if (xgene_word_tst_and_clr(&generic_comm_base->status,
+				   PCC_STS_CMD_COMPLETE)) {
+		msg = generic_comm_base + 1;
+
+		/* Response message msg[1] contains the return value. */
+		if (ctx->resp_msg)
+			*ctx->resp_msg = ((u32 *)msg)[1];
+
+		complete(&ctx->rd_complete);
+	}
+}
+
+static void slimpro_i2c_pcc_tx_prepare(struct slimpro_i2c_dev *ctx, u32 *msg)
+{
+	struct acpi_pcct_shared_memory *generic_comm_base = ctx->pcc_comm_addr;
+	u32 *ptr = (void *)(generic_comm_base + 1);
+	u16 status;
+	int i;
+
+	WRITE_ONCE(generic_comm_base->signature,
+		   cpu_to_le32(PCC_SIGNATURE | ctx->mbox_idx));
+
+	WRITE_ONCE(generic_comm_base->command,
+		   cpu_to_le16(SLIMPRO_MSG_TYPE(msg[0]) | PCC_CMD_GENERATE_DB_INT));
+
+	status = le16_to_cpu(READ_ONCE(generic_comm_base->status));
+	status &= ~PCC_STS_CMD_COMPLETE;
+	WRITE_ONCE(generic_comm_base->status, cpu_to_le16(status));
+
+	/* Copy the message to the PCC comm space */
+	for (i = 0; i < SLIMPRO_IIC_MSG_DWORD_COUNT; i++)
+		WRITE_ONCE(ptr[i], cpu_to_le32(msg[i]));
+}
+
 static int start_i2c_msg_xfer(struct slimpro_i2c_dev *ctx)
 {
-	if (ctx->mbox_client.tx_block) {
+	if (ctx->mbox_client.tx_block || !acpi_disabled) {
 		if (!wait_for_completion_timeout(&ctx->rd_complete,
 						 msecs_to_jiffies(MAILBOX_OP_TIMEOUT)))
 			return -ETIMEDOUT;
@@ -144,49 +220,60 @@ static int start_i2c_msg_xfer(struct slimpro_i2c_dev *ctx)
 	return 0;
 }
 
-static int slimpro_i2c_rd(struct slimpro_i2c_dev *ctx, u32 chip,
-			  u32 addr, u32 addrlen, u32 protocol,
-			  u32 readlen, u32 *data)
+static int slimpro_i2c_send_msg(struct slimpro_i2c_dev *ctx,
+				u32 *msg,
+				u32 *data)
 {
-	u32 msg[3];
 	int rc;
 
-	msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip,
-					SLIMPRO_IIC_READ, protocol, addrlen, readlen);
-	msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr);
-	msg[2] = 0;
 	ctx->resp_msg = data;
-	rc = mbox_send_message(ctx->mbox_chan, &msg);
+
+	if (!acpi_disabled) {
+		reinit_completion(&ctx->rd_complete);
+		slimpro_i2c_pcc_tx_prepare(ctx, msg);
+	}
+
+	rc = mbox_send_message(ctx->mbox_chan, msg);
 	if (rc < 0)
 		goto err;
 
 	rc = start_i2c_msg_xfer(ctx);
+
 err:
+	if (!acpi_disabled)
+		mbox_chan_txdone(ctx->mbox_chan, 0);
+
 	ctx->resp_msg = NULL;
+
 	return rc;
 }
 
+static int slimpro_i2c_rd(struct slimpro_i2c_dev *ctx, u32 chip,
+			  u32 addr, u32 addrlen, u32 protocol,
+			  u32 readlen, u32 *data)
+{
+	u32 msg[3];
+
+	msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip,
+					SLIMPRO_IIC_READ, protocol, addrlen, readlen);
+	msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr);
+	msg[2] = 0;
+
+	return slimpro_i2c_send_msg(ctx, msg, data);
+}
+
 static int slimpro_i2c_wr(struct slimpro_i2c_dev *ctx, u32 chip,
 			  u32 addr, u32 addrlen, u32 protocol, u32 writelen,
 			  u32 data)
 {
 	u32 msg[3];
-	int rc;
 
 	msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip,
 					SLIMPRO_IIC_WRITE, protocol, addrlen, writelen);
 	msg[1] = SLIMPRO_IIC_ENCODE_ADDR(addr);
 	msg[2] = data;
-	ctx->resp_msg = msg;
-
-	rc = mbox_send_message(ctx->mbox_chan, &msg);
-	if (rc < 0)
-		goto err;
 
-	rc = start_i2c_msg_xfer(ctx);
-err:
-	ctx->resp_msg = NULL;
-	return rc;
+	return slimpro_i2c_send_msg(ctx, msg, msg);
 }
 
 static int slimpro_i2c_blkrd(struct slimpro_i2c_dev *ctx, u32 chip, u32 addr,
@@ -201,8 +288,7 @@ static int slimpro_i2c_blkrd(struct slimpro_i2c_dev *ctx, u32 chip, u32 addr,
 	if (dma_mapping_error(ctx->dev, paddr)) {
 		dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n",
 			ctx->dma_buffer);
-		rc = -ENOMEM;
-		goto err;
+		return -ENOMEM;
 	}
 
 	msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_READ,
@@ -212,21 +298,13 @@ static int slimpro_i2c_blkrd(struct slimpro_i2c_dev *ctx, u32 chip, u32 addr,
 		 SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(paddr) |
 		 SLIMPRO_IIC_ENCODE_ADDR(addr);
 	msg[2] = (u32)paddr;
-	ctx->resp_msg = msg;
-
-	rc = mbox_send_message(ctx->mbox_chan, &msg);
-	if (rc < 0)
-		goto err_unmap;
 
-	rc = start_i2c_msg_xfer(ctx);
+	rc = slimpro_i2c_send_msg(ctx, msg, msg);
 
 	/* Copy to destination */
 	memcpy(data, ctx->dma_buffer, readlen);
 
-err_unmap:
 	dma_unmap_single(ctx->dev, paddr, readlen, DMA_FROM_DEVICE);
-err:
-	ctx->resp_msg = NULL;
 	return rc;
 }
 
@@ -244,8 +322,7 @@ static int slimpro_i2c_blkwr(struct slimpro_i2c_dev *ctx, u32 chip,
 	if (dma_mapping_error(ctx->dev, paddr)) {
 		dev_err(&ctx->adapter.dev, "Error in mapping dma buffer %p\n",
 			ctx->dma_buffer);
-		rc = -ENOMEM;
-		goto err;
+		return -ENOMEM;
 	}
 
 	msg[0] = SLIMPRO_IIC_ENCODE_MSG(SLIMPRO_IIC_BUS, chip, SLIMPRO_IIC_WRITE,
@@ -254,21 +331,13 @@ static int slimpro_i2c_blkwr(struct slimpro_i2c_dev *ctx, u32 chip,
 		 SLIMPRO_IIC_ENCODE_UPPER_BUFADDR(paddr) |
 		 SLIMPRO_IIC_ENCODE_ADDR(addr);
 	msg[2] = (u32)paddr;
-	ctx->resp_msg = msg;
 
 	if (ctx->mbox_client.tx_block)
 		reinit_completion(&ctx->rd_complete);
 
-	rc = mbox_send_message(ctx->mbox_chan, &msg);
-	if (rc < 0)
-		goto err_unmap;
+	rc = slimpro_i2c_send_msg(ctx, msg, msg);
 
-	rc = start_i2c_msg_xfer(ctx);
-
-err_unmap:
 	dma_unmap_single(ctx->dev, paddr, writelen, DMA_TO_DEVICE);
-err:
-	ctx->resp_msg = NULL;
 	return rc;
 }
 
@@ -394,17 +463,73 @@ static int xgene_slimpro_i2c_probe(struct platform_device *pdev)
 
 	/* Request mailbox channel */
 	cl->dev = &pdev->dev;
-	cl->rx_callback = slimpro_i2c_rx_cb;
-	cl->tx_block = true;
 	init_completion(&ctx->rd_complete);
 	cl->tx_tout = MAILBOX_OP_TIMEOUT;
 	cl->knows_txdone = false;
-	ctx->mbox_chan = mbox_request_channel(cl, MAILBOX_I2C_INDEX);
-	if (IS_ERR(ctx->mbox_chan)) {
-		dev_err(&pdev->dev, "i2c mailbox channel request failed\n");
-		return PTR_ERR(ctx->mbox_chan);
-	}
+	if (acpi_disabled) {
+		cl->tx_block = true;
+		cl->rx_callback = slimpro_i2c_rx_cb;
+		ctx->mbox_chan = mbox_request_channel(cl, MAILBOX_I2C_INDEX);
+		if (IS_ERR(ctx->mbox_chan)) {
+			dev_err(&pdev->dev, "i2c mailbox channel request failed\n");
+			return PTR_ERR(ctx->mbox_chan);
+		}
+	} else {
+		struct acpi_pcct_hw_reduced *cppc_ss;
+
+		if (device_property_read_u32(&pdev->dev, "pcc-channel",
+					     &ctx->mbox_idx))
+			ctx->mbox_idx = MAILBOX_I2C_INDEX;
+
+		cl->tx_block = false;
+		cl->rx_callback = slimpro_i2c_pcc_rx_cb;
+		ctx->mbox_chan = pcc_mbox_request_channel(cl, ctx->mbox_idx);
+		if (IS_ERR(ctx->mbox_chan)) {
+			dev_err(&pdev->dev, "PCC mailbox channel request failed\n");
+			return PTR_ERR(ctx->mbox_chan);
+		}
+
+		/*
+		 * The PCC mailbox controller driver should
+		 * have parsed the PCCT (global table of all
+		 * PCC channels) and stored pointers to the
+		 * subspace communication region in con_priv.
+		 */
+		cppc_ss = ctx->mbox_chan->con_priv;
+		if (!cppc_ss) {
+			dev_err(&pdev->dev, "PPC subspace not found\n");
+			rc = -ENOENT;
+			goto mbox_err;
+		}
+
+		if (!ctx->mbox_chan->mbox->txdone_irq) {
+			dev_err(&pdev->dev, "PCC IRQ not supported\n");
+			rc = -ENOENT;
+			goto mbox_err;
+		}
+
+		/*
+		 * This is the shared communication region
+		 * for the OS and Platform to communicate over.
+		 */
+		ctx->comm_base_addr = cppc_ss->base_address;
+		if (ctx->comm_base_addr) {
+			ctx->pcc_comm_addr = memremap(ctx->comm_base_addr,
+						      cppc_ss->length,
+						      MEMREMAP_WB);
+		} else {
+			dev_err(&pdev->dev, "Failed to get PCC comm region\n");
+			rc = -ENOENT;
+			goto mbox_err;
+		}
 
+		if (!ctx->pcc_comm_addr) {
+			dev_err(&pdev->dev,
+				"Failed to ioremap PCC comm region\n");
+			rc = -ENOMEM;
+			goto mbox_err;
+		}
+	}
 	rc = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(64));
 	if (rc)
 		dev_warn(&pdev->dev, "Unable to set dma mask\n");
@@ -419,13 +544,19 @@ static int xgene_slimpro_i2c_probe(struct platform_device *pdev)
 	ACPI_COMPANION_SET(&adapter->dev, ACPI_COMPANION(&pdev->dev));
 	i2c_set_adapdata(adapter, ctx);
 	rc = i2c_add_adapter(adapter);
-	if (rc) {
-		mbox_free_channel(ctx->mbox_chan);
-		return rc;
-	}
+	if (rc)
+		goto mbox_err;
 
 	dev_info(&pdev->dev, "Mailbox I2C Adapter registered\n");
 	return 0;
+
+mbox_err:
+	if (acpi_disabled)
+		mbox_free_channel(ctx->mbox_chan);
+	else
+		pcc_mbox_free_channel(ctx->mbox_chan);
+
+	return rc;
 }
 
 static int xgene_slimpro_i2c_remove(struct platform_device *pdev)
@@ -434,7 +565,10 @@ static int xgene_slimpro_i2c_remove(struct platform_device *pdev)
 
 	i2c_del_adapter(&ctx->adapter);
 
-	mbox_free_channel(ctx->mbox_chan);
+	if (acpi_disabled)
+		mbox_free_channel(ctx->mbox_chan);
+	else
+		pcc_mbox_free_channel(ctx->mbox_chan);
 
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-xlp9xx.c b/drivers/i2c/busses/i2c-xlp9xx.c
index ae80228104e9..6b106e94bc09 100644
--- a/drivers/i2c/busses/i2c-xlp9xx.c
+++ b/drivers/i2c/busses/i2c-xlp9xx.c
@@ -393,6 +393,7 @@ static int xlp9xx_i2c_probe(struct platform_device *pdev)
 	init_completion(&priv->msg_complete);
 	priv->adapter.dev.parent = &pdev->dev;
 	priv->adapter.algo = &xlp9xx_i2c_algo;
+	priv->adapter.class = I2C_CLASS_HWMON;
 	ACPI_COMPANION_SET(&priv->adapter.dev, ACPI_COMPANION(&pdev->dev));
 	priv->adapter.dev.of_node = pdev->dev.of_node;
 	priv->dev = &pdev->dev;
diff --git a/drivers/i2c/busses/i2c-zx2967.c b/drivers/i2c/busses/i2c-zx2967.c
new file mode 100644
index 000000000000..48281c1b30c6
--- /dev/null
+++ b/drivers/i2c/busses/i2c-zx2967.c
@@ -0,0 +1,609 @@
+/*
+ * Copyright (C) 2017 Sanechips Technology Co., Ltd.
+ * Copyright 2017 Linaro Ltd.
+ *
+ * Author: Baoyou Xie <baoyou.xie@linaro.org>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/clk.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/io.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+
+#define REG_CMD				0x04
+#define REG_DEVADDR_H			0x0C
+#define REG_DEVADDR_L			0x10
+#define REG_CLK_DIV_FS			0x14
+#define REG_CLK_DIV_HS			0x18
+#define REG_WRCONF			0x1C
+#define REG_RDCONF			0x20
+#define REG_DATA			0x24
+#define REG_STAT			0x28
+
+#define I2C_STOP			0
+#define I2C_MASTER			BIT(0)
+#define I2C_ADDR_MODE_TEN		BIT(1)
+#define I2C_IRQ_MSK_ENABLE		BIT(3)
+#define I2C_RW_READ			BIT(4)
+#define I2C_CMB_RW_EN			BIT(5)
+#define I2C_START			BIT(6)
+
+#define I2C_ADDR_LOW_MASK		GENMASK(6, 0)
+#define I2C_ADDR_LOW_SHIFT		0
+#define I2C_ADDR_HI_MASK		GENMASK(2, 0)
+#define I2C_ADDR_HI_SHIFT		7
+
+#define I2C_WFIFO_RESET			BIT(7)
+#define I2C_RFIFO_RESET			BIT(7)
+
+#define I2C_IRQ_ACK_CLEAR		BIT(7)
+#define I2C_INT_MASK			GENMASK(6, 0)
+
+#define I2C_TRANS_DONE			BIT(0)
+#define I2C_SR_EDEVICE			BIT(1)
+#define I2C_SR_EDATA			BIT(2)
+
+#define I2C_FIFO_MAX			16
+
+#define I2C_TIMEOUT			msecs_to_jiffies(1000)
+
+#define DEV(i2c)			((i2c)->adap.dev.parent)
+
+struct zx2967_i2c {
+	struct i2c_adapter	adap;
+	struct clk		*clk;
+	struct completion	complete;
+	u32			clk_freq;
+	void __iomem		*reg_base;
+	size_t			residue;
+	int			irq;
+	int			msg_rd;
+	u8			*cur_trans;
+	u8			access_cnt;
+	bool			is_suspended;
+	int			error;
+};
+
+static void zx2967_i2c_writel(struct zx2967_i2c *i2c,
+			      u32 val, unsigned long reg)
+{
+	writel_relaxed(val, i2c->reg_base + reg);
+}
+
+static u32 zx2967_i2c_readl(struct zx2967_i2c *i2c, unsigned long reg)
+{
+	return readl_relaxed(i2c->reg_base + reg);
+}
+
+static void zx2967_i2c_writesb(struct zx2967_i2c *i2c,
+			       void *data, unsigned long reg, int len)
+{
+	writesb(i2c->reg_base + reg, data, len);
+}
+
+static void zx2967_i2c_readsb(struct zx2967_i2c *i2c,
+			      void *data, unsigned long reg, int len)
+{
+	readsb(i2c->reg_base + reg, data, len);
+}
+
+static void zx2967_i2c_start_ctrl(struct zx2967_i2c *i2c)
+{
+	u32 status;
+	u32 ctl;
+
+	status = zx2967_i2c_readl(i2c, REG_STAT);
+	status |= I2C_IRQ_ACK_CLEAR;
+	zx2967_i2c_writel(i2c, status, REG_STAT);
+
+	ctl = zx2967_i2c_readl(i2c, REG_CMD);
+	if (i2c->msg_rd)
+		ctl |= I2C_RW_READ;
+	else
+		ctl &= ~I2C_RW_READ;
+	ctl &= ~I2C_CMB_RW_EN;
+	ctl |= I2C_START;
+	zx2967_i2c_writel(i2c, ctl, REG_CMD);
+}
+
+static void zx2967_i2c_flush_fifos(struct zx2967_i2c *i2c)
+{
+	u32 offset;
+	u32 val;
+
+	if (i2c->msg_rd) {
+		offset = REG_RDCONF;
+		val = I2C_RFIFO_RESET;
+	} else {
+		offset = REG_WRCONF;
+		val = I2C_WFIFO_RESET;
+	}
+
+	val |= zx2967_i2c_readl(i2c, offset);
+	zx2967_i2c_writel(i2c, val, offset);
+}
+
+static int zx2967_i2c_empty_rx_fifo(struct zx2967_i2c *i2c, u32 size)
+{
+	u8 val[I2C_FIFO_MAX] = {0};
+	int i;
+
+	if (size > I2C_FIFO_MAX) {
+		dev_err(DEV(i2c), "fifo size %d over the max value %d\n",
+			size, I2C_FIFO_MAX);
+		return -EINVAL;
+	}
+
+	zx2967_i2c_readsb(i2c, val, REG_DATA, size);
+	for (i = 0; i < size; i++) {
+		*i2c->cur_trans++ = val[i];
+		i2c->residue--;
+	}
+
+	barrier();
+
+	return 0;
+}
+
+static int zx2967_i2c_fill_tx_fifo(struct zx2967_i2c *i2c)
+{
+	size_t residue = i2c->residue;
+	u8 *buf = i2c->cur_trans;
+
+	if (residue == 0) {
+		dev_err(DEV(i2c), "residue is %d\n", (int)residue);
+		return -EINVAL;
+	}
+
+	if (residue <= I2C_FIFO_MAX) {
+		zx2967_i2c_writesb(i2c, buf, REG_DATA, residue);
+
+		/* Again update before writing to FIFO to make sure isr sees. */
+		i2c->residue = 0;
+		i2c->cur_trans = NULL;
+	} else {
+		zx2967_i2c_writesb(i2c, buf, REG_DATA, I2C_FIFO_MAX);
+		i2c->residue -= I2C_FIFO_MAX;
+		i2c->cur_trans += I2C_FIFO_MAX;
+	}
+
+	barrier();
+
+	return 0;
+}
+
+static int zx2967_i2c_reset_hardware(struct zx2967_i2c *i2c)
+{
+	u32 val;
+	u32 clk_div;
+
+	val = I2C_MASTER | I2C_IRQ_MSK_ENABLE;
+	zx2967_i2c_writel(i2c, val, REG_CMD);
+
+	clk_div = clk_get_rate(i2c->clk) / i2c->clk_freq - 1;
+	zx2967_i2c_writel(i2c, clk_div, REG_CLK_DIV_FS);
+	zx2967_i2c_writel(i2c, clk_div, REG_CLK_DIV_HS);
+
+	zx2967_i2c_writel(i2c, I2C_FIFO_MAX - 1, REG_WRCONF);
+	zx2967_i2c_writel(i2c, I2C_FIFO_MAX - 1, REG_RDCONF);
+	zx2967_i2c_writel(i2c, 1, REG_RDCONF);
+
+	zx2967_i2c_flush_fifos(i2c);
+
+	return 0;
+}
+
+static void zx2967_i2c_isr_clr(struct zx2967_i2c *i2c)
+{
+	u32 status;
+
+	status = zx2967_i2c_readl(i2c, REG_STAT);
+	status |= I2C_IRQ_ACK_CLEAR;
+	zx2967_i2c_writel(i2c, status, REG_STAT);
+}
+
+static irqreturn_t zx2967_i2c_isr(int irq, void *dev_id)
+{
+	u32 status;
+	struct zx2967_i2c *i2c = (struct zx2967_i2c *)dev_id;
+
+	status = zx2967_i2c_readl(i2c, REG_STAT) & I2C_INT_MASK;
+	zx2967_i2c_isr_clr(i2c);
+
+	if (status & I2C_SR_EDEVICE)
+		i2c->error = -ENXIO;
+	else if (status & I2C_SR_EDATA)
+		i2c->error = -EIO;
+	else if (status & I2C_TRANS_DONE)
+		i2c->error = 0;
+	else
+		goto done;
+
+	complete(&i2c->complete);
+done:
+	return IRQ_HANDLED;
+}
+
+static void zx2967_set_addr(struct zx2967_i2c *i2c, u16 addr)
+{
+	u16 val;
+
+	val = (addr >> I2C_ADDR_LOW_SHIFT) & I2C_ADDR_LOW_MASK;
+	zx2967_i2c_writel(i2c, val, REG_DEVADDR_L);
+
+	val = (addr >> I2C_ADDR_HI_SHIFT) & I2C_ADDR_HI_MASK;
+	zx2967_i2c_writel(i2c, val, REG_DEVADDR_H);
+	if (val)
+		val = zx2967_i2c_readl(i2c, REG_CMD) | I2C_ADDR_MODE_TEN;
+	else
+		val = zx2967_i2c_readl(i2c, REG_CMD) & ~I2C_ADDR_MODE_TEN;
+	zx2967_i2c_writel(i2c, val, REG_CMD);
+}
+
+static int zx2967_i2c_xfer_bytes(struct zx2967_i2c *i2c, u32 bytes)
+{
+	unsigned long time_left;
+	int rd = i2c->msg_rd;
+	int ret;
+
+	reinit_completion(&i2c->complete);
+
+	if (rd) {
+		zx2967_i2c_writel(i2c, bytes - 1, REG_RDCONF);
+	} else {
+		ret = zx2967_i2c_fill_tx_fifo(i2c);
+		if (ret)
+			return ret;
+	}
+
+	zx2967_i2c_start_ctrl(i2c);
+
+	time_left = wait_for_completion_timeout(&i2c->complete,
+						I2C_TIMEOUT);
+	if (time_left == 0)
+		return -ETIMEDOUT;
+
+	if (i2c->error)
+		return i2c->error;
+
+	return rd ? zx2967_i2c_empty_rx_fifo(i2c, bytes) : 0;
+}
+
+static int zx2967_i2c_xfer_msg(struct zx2967_i2c *i2c,
+			       struct i2c_msg *msg)
+{
+	int ret;
+	int i;
+
+	if (msg->len == 0)
+		return -EINVAL;
+
+	zx2967_i2c_flush_fifos(i2c);
+
+	i2c->cur_trans = msg->buf;
+	i2c->residue = msg->len;
+	i2c->access_cnt = msg->len / I2C_FIFO_MAX;
+	i2c->msg_rd = msg->flags & I2C_M_RD;
+
+	for (i = 0; i < i2c->access_cnt; i++) {
+		ret = zx2967_i2c_xfer_bytes(i2c, I2C_FIFO_MAX);
+		if (ret)
+			return ret;
+	}
+
+	if (i2c->residue > 0) {
+		ret = zx2967_i2c_xfer_bytes(i2c, i2c->residue);
+		if (ret)
+			return ret;
+	}
+
+	i2c->residue = 0;
+	i2c->access_cnt = 0;
+
+	return 0;
+}
+
+static int zx2967_i2c_xfer(struct i2c_adapter *adap,
+			   struct i2c_msg *msgs, int num)
+{
+	struct zx2967_i2c *i2c = i2c_get_adapdata(adap);
+	int ret;
+	int i;
+
+	if (i2c->is_suspended)
+		return -EBUSY;
+
+	zx2967_set_addr(i2c, msgs->addr);
+
+	for (i = 0; i < num; i++) {
+		ret = zx2967_i2c_xfer_msg(i2c, &msgs[i]);
+		if (ret)
+			return ret;
+	}
+
+	return num;
+}
+
+static void
+zx2967_smbus_xfer_prepare(struct zx2967_i2c *i2c, u16 addr,
+			  char read_write, u8 command, int size,
+			  union i2c_smbus_data *data)
+{
+	u32 val;
+
+	val = zx2967_i2c_readl(i2c, REG_RDCONF);
+	val |= I2C_RFIFO_RESET;
+	zx2967_i2c_writel(i2c, val, REG_RDCONF);
+	zx2967_set_addr(i2c, addr);
+	val = zx2967_i2c_readl(i2c, REG_CMD);
+	val &= ~I2C_RW_READ;
+	zx2967_i2c_writel(i2c, val, REG_CMD);
+
+	switch (size) {
+	case I2C_SMBUS_BYTE:
+		zx2967_i2c_writel(i2c, command, REG_DATA);
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		zx2967_i2c_writel(i2c, command, REG_DATA);
+		if (read_write == I2C_SMBUS_WRITE)
+			zx2967_i2c_writel(i2c, data->byte, REG_DATA);
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		zx2967_i2c_writel(i2c, command, REG_DATA);
+		if (read_write == I2C_SMBUS_WRITE) {
+			zx2967_i2c_writel(i2c, (data->word >> 8), REG_DATA);
+			zx2967_i2c_writel(i2c, (data->word & 0xff),
+					  REG_DATA);
+		}
+		break;
+	}
+}
+
+static int zx2967_smbus_xfer_read(struct zx2967_i2c *i2c, int size,
+				  union i2c_smbus_data *data)
+{
+	unsigned long time_left;
+	u8 buf[2];
+	u32 val;
+
+	reinit_completion(&i2c->complete);
+
+	val = zx2967_i2c_readl(i2c, REG_CMD);
+	val |= I2C_CMB_RW_EN;
+	zx2967_i2c_writel(i2c, val, REG_CMD);
+
+	val = zx2967_i2c_readl(i2c, REG_CMD);
+	val |= I2C_START;
+	zx2967_i2c_writel(i2c, val, REG_CMD);
+
+	time_left = wait_for_completion_timeout(&i2c->complete,
+						I2C_TIMEOUT);
+	if (time_left == 0)
+		return -ETIMEDOUT;
+
+	if (i2c->error)
+		return i2c->error;
+
+	switch (size) {
+	case I2C_SMBUS_BYTE:
+	case I2C_SMBUS_BYTE_DATA:
+		val = zx2967_i2c_readl(i2c, REG_DATA);
+		data->byte = val;
+		break;
+	case I2C_SMBUS_WORD_DATA:
+	case I2C_SMBUS_PROC_CALL:
+		buf[0] = zx2967_i2c_readl(i2c, REG_DATA);
+		buf[1] = zx2967_i2c_readl(i2c, REG_DATA);
+		data->word = (buf[0] << 8) | buf[1];
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	return 0;
+}
+
+static int zx2967_smbus_xfer_write(struct zx2967_i2c *i2c)
+{
+	unsigned long time_left;
+	u32 val;
+
+	reinit_completion(&i2c->complete);
+	val = zx2967_i2c_readl(i2c, REG_CMD);
+	val |= I2C_START;
+	zx2967_i2c_writel(i2c, val, REG_CMD);
+
+	time_left = wait_for_completion_timeout(&i2c->complete,
+						I2C_TIMEOUT);
+	if (time_left == 0)
+		return -ETIMEDOUT;
+
+	if (i2c->error)
+		return i2c->error;
+
+	return 0;
+}
+
+static int zx2967_smbus_xfer(struct i2c_adapter *adap, u16 addr,
+			     unsigned short flags, char read_write,
+			     u8 command, int size, union i2c_smbus_data *data)
+{
+	struct zx2967_i2c *i2c = i2c_get_adapdata(adap);
+
+	if (size == I2C_SMBUS_QUICK)
+		read_write = I2C_SMBUS_WRITE;
+
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+	case I2C_SMBUS_BYTE:
+	case I2C_SMBUS_BYTE_DATA:
+	case I2C_SMBUS_WORD_DATA:
+		zx2967_smbus_xfer_prepare(i2c, addr, read_write,
+					  command, size, data);
+		break;
+	default:
+		return -EOPNOTSUPP;
+	}
+
+	if (read_write == I2C_SMBUS_READ)
+		return zx2967_smbus_xfer_read(i2c, size, data);
+
+	return zx2967_smbus_xfer_write(i2c);
+}
+
+static u32 zx2967_i2c_func(struct i2c_adapter *adap)
+{
+	return I2C_FUNC_I2C |
+	       I2C_FUNC_SMBUS_QUICK |
+	       I2C_FUNC_SMBUS_BYTE |
+	       I2C_FUNC_SMBUS_BYTE_DATA |
+	       I2C_FUNC_SMBUS_WORD_DATA |
+	       I2C_FUNC_SMBUS_BLOCK_DATA |
+	       I2C_FUNC_SMBUS_PROC_CALL |
+	       I2C_FUNC_SMBUS_I2C_BLOCK;
+}
+
+static int __maybe_unused zx2967_i2c_suspend(struct device *dev)
+{
+	struct zx2967_i2c *i2c = dev_get_drvdata(dev);
+
+	i2c->is_suspended = true;
+	clk_disable_unprepare(i2c->clk);
+
+	return 0;
+}
+
+static int __maybe_unused zx2967_i2c_resume(struct device *dev)
+{
+	struct zx2967_i2c *i2c = dev_get_drvdata(dev);
+
+	i2c->is_suspended = false;
+	clk_prepare_enable(i2c->clk);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(zx2967_i2c_dev_pm_ops,
+			 zx2967_i2c_suspend, zx2967_i2c_resume);
+
+static const struct i2c_algorithm zx2967_i2c_algo = {
+	.master_xfer = zx2967_i2c_xfer,
+	.smbus_xfer = zx2967_smbus_xfer,
+	.functionality = zx2967_i2c_func,
+};
+
+static const struct of_device_id zx2967_i2c_of_match[] = {
+	{ .compatible = "zte,zx296718-i2c", },
+	{ },
+};
+MODULE_DEVICE_TABLE(of, zx2967_i2c_of_match);
+
+static int zx2967_i2c_probe(struct platform_device *pdev)
+{
+	struct zx2967_i2c *i2c;
+	void __iomem *reg_base;
+	struct resource *res;
+	struct clk *clk;
+	int ret;
+
+	i2c = devm_kzalloc(&pdev->dev, sizeof(*i2c), GFP_KERNEL);
+	if (!i2c)
+		return -ENOMEM;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	reg_base = devm_ioremap_resource(&pdev->dev, res);
+	if (IS_ERR(reg_base))
+		return PTR_ERR(reg_base);
+
+	clk = devm_clk_get(&pdev->dev, NULL);
+	if (IS_ERR(clk)) {
+		dev_err(&pdev->dev, "missing controller clock");
+		return PTR_ERR(clk);
+	}
+
+	ret = clk_prepare_enable(clk);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to enable i2c_clk\n");
+		return ret;
+	}
+
+	ret = device_property_read_u32(&pdev->dev, "clock-frequency",
+				       &i2c->clk_freq);
+	if (ret) {
+		dev_err(&pdev->dev, "missing clock-frequency");
+		return ret;
+	}
+
+	ret = platform_get_irq(pdev, 0);
+	if (ret < 0)
+		return ret;
+
+	i2c->irq = ret;
+	i2c->reg_base = reg_base;
+	i2c->clk = clk;
+
+	init_completion(&i2c->complete);
+	platform_set_drvdata(pdev, i2c);
+
+	ret = zx2967_i2c_reset_hardware(i2c);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to initialize i2c controller\n");
+		goto err_clk_unprepare;
+	}
+
+	ret = devm_request_irq(&pdev->dev, i2c->irq,
+			zx2967_i2c_isr, 0, dev_name(&pdev->dev), i2c);
+	if (ret) {
+		dev_err(&pdev->dev, "failed to request irq %i\n", i2c->irq);
+		goto err_clk_unprepare;
+	}
+
+	i2c_set_adapdata(&i2c->adap, i2c);
+	strlcpy(i2c->adap.name, "zx2967 i2c adapter",
+		sizeof(i2c->adap.name));
+	i2c->adap.algo = &zx2967_i2c_algo;
+	i2c->adap.nr = pdev->id;
+	i2c->adap.dev.parent = &pdev->dev;
+	i2c->adap.dev.of_node = pdev->dev.of_node;
+
+	ret = i2c_add_numbered_adapter(&i2c->adap);
+	if (ret)
+		goto err_clk_unprepare;
+
+	return 0;
+
+err_clk_unprepare:
+	clk_disable_unprepare(i2c->clk);
+	return ret;
+}
+
+static int zx2967_i2c_remove(struct platform_device *pdev)
+{
+	struct zx2967_i2c *i2c = platform_get_drvdata(pdev);
+
+	i2c_del_adapter(&i2c->adap);
+	clk_disable_unprepare(i2c->clk);
+
+	return 0;
+}
+
+static struct platform_driver zx2967_i2c_driver = {
+	.probe	= zx2967_i2c_probe,
+	.remove	= zx2967_i2c_remove,
+	.driver	= {
+		.name  = "zx2967_i2c",
+		.of_match_table = zx2967_i2c_of_match,
+		.pm = &zx2967_i2c_dev_pm_ops,
+	},
+};
+module_platform_driver(zx2967_i2c_driver);
+
+MODULE_AUTHOR("Baoyou Xie <baoyou.xie@linaro.org>");
+MODULE_DESCRIPTION("ZTE ZX2967 I2C Bus Controller driver");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/i2c/i2c-core-acpi.c b/drivers/i2c/i2c-core-acpi.c
new file mode 100644
index 000000000000..4842ec3a5451
--- /dev/null
+++ b/drivers/i2c/i2c-core-acpi.c
@@ -0,0 +1,665 @@
+/*
+ * Linux I2C core ACPI support code
+ *
+ * Copyright (C) 2014 Intel Corp, Author: Lan Tianyu <tianyu.lan@intel.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+
+#include "i2c-core.h"
+
+struct i2c_acpi_handler_data {
+	struct acpi_connection_info info;
+	struct i2c_adapter *adapter;
+};
+
+struct gsb_buffer {
+	u8	status;
+	u8	len;
+	union {
+		u16	wdata;
+		u8	bdata;
+		u8	data[0];
+	};
+} __packed;
+
+struct i2c_acpi_lookup {
+	struct i2c_board_info *info;
+	acpi_handle adapter_handle;
+	acpi_handle device_handle;
+	acpi_handle search_handle;
+	int n;
+	int index;
+	u32 speed;
+	u32 min_speed;
+};
+
+static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data)
+{
+	struct i2c_acpi_lookup *lookup = data;
+	struct i2c_board_info *info = lookup->info;
+	struct acpi_resource_i2c_serialbus *sb;
+	acpi_status status;
+
+	if (info->addr || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
+		return 1;
+
+	sb = &ares->data.i2c_serial_bus;
+	if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C)
+		return 1;
+
+	if (lookup->index != -1 && lookup->n++ != lookup->index)
+		return 1;
+
+	status = acpi_get_handle(lookup->device_handle,
+				 sb->resource_source.string_ptr,
+				 &lookup->adapter_handle);
+	if (!ACPI_SUCCESS(status))
+		return 1;
+
+	info->addr = sb->slave_address;
+	lookup->speed = sb->connection_speed;
+	if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+		info->flags |= I2C_CLIENT_TEN;
+
+	return 1;
+}
+
+static const struct acpi_device_id i2c_acpi_ignored_device_ids[] = {
+	/*
+	 * ACPI video acpi_devices, which are handled by the acpi-video driver
+	 * sometimes contain a SERIAL_TYPE_I2C ACPI resource, ignore these.
+	 */
+	{ ACPI_VIDEO_HID, 0 },
+	{}
+};
+
+static int i2c_acpi_do_lookup(struct acpi_device *adev,
+			      struct i2c_acpi_lookup *lookup)
+{
+	struct i2c_board_info *info = lookup->info;
+	struct list_head resource_list;
+	int ret;
+
+	if (acpi_bus_get_status(adev) || !adev->status.present ||
+	    acpi_device_enumerated(adev))
+		return -EINVAL;
+
+	if (acpi_match_device_ids(adev, i2c_acpi_ignored_device_ids) == 0)
+		return -ENODEV;
+
+	memset(info, 0, sizeof(*info));
+	lookup->device_handle = acpi_device_handle(adev);
+
+	/* Look up for I2cSerialBus resource */
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_resources(adev, &resource_list,
+				     i2c_acpi_fill_info, lookup);
+	acpi_dev_free_resource_list(&resource_list);
+
+	if (ret < 0 || !info->addr)
+		return -EINVAL;
+
+	return 0;
+}
+
+static int i2c_acpi_get_info(struct acpi_device *adev,
+			     struct i2c_board_info *info,
+			     struct i2c_adapter *adapter,
+			     acpi_handle *adapter_handle)
+{
+	struct list_head resource_list;
+	struct resource_entry *entry;
+	struct i2c_acpi_lookup lookup;
+	int ret;
+
+	memset(&lookup, 0, sizeof(lookup));
+	lookup.info = info;
+	lookup.index = -1;
+
+	ret = i2c_acpi_do_lookup(adev, &lookup);
+	if (ret)
+		return ret;
+
+	if (adapter) {
+		/* The adapter must match the one in I2cSerialBus() connector */
+		if (ACPI_HANDLE(&adapter->dev) != lookup.adapter_handle)
+			return -ENODEV;
+	} else {
+		struct acpi_device *adapter_adev;
+
+		/* The adapter must be present */
+		if (acpi_bus_get_device(lookup.adapter_handle, &adapter_adev))
+			return -ENODEV;
+		if (acpi_bus_get_status(adapter_adev) ||
+		    !adapter_adev->status.present)
+			return -ENODEV;
+	}
+
+	info->fwnode = acpi_fwnode_handle(adev);
+	if (adapter_handle)
+		*adapter_handle = lookup.adapter_handle;
+
+	/* Then fill IRQ number if any */
+	INIT_LIST_HEAD(&resource_list);
+	ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
+	if (ret < 0)
+		return -EINVAL;
+
+	resource_list_for_each_entry(entry, &resource_list) {
+		if (resource_type(entry->res) == IORESOURCE_IRQ) {
+			info->irq = entry->res->start;
+			break;
+		}
+	}
+
+	acpi_dev_free_resource_list(&resource_list);
+
+	acpi_set_modalias(adev, dev_name(&adev->dev), info->type,
+			  sizeof(info->type));
+
+	return 0;
+}
+
+static void i2c_acpi_register_device(struct i2c_adapter *adapter,
+				     struct acpi_device *adev,
+				     struct i2c_board_info *info)
+{
+	adev->power.flags.ignore_parent = true;
+	acpi_device_set_enumerated(adev);
+
+	if (!i2c_new_device(adapter, info)) {
+		adev->power.flags.ignore_parent = false;
+		dev_err(&adapter->dev,
+			"failed to add I2C device %s from ACPI\n",
+			dev_name(&adev->dev));
+	}
+}
+
+static acpi_status i2c_acpi_add_device(acpi_handle handle, u32 level,
+				       void *data, void **return_value)
+{
+	struct i2c_adapter *adapter = data;
+	struct acpi_device *adev;
+	struct i2c_board_info info;
+
+	if (acpi_bus_get_device(handle, &adev))
+		return AE_OK;
+
+	if (i2c_acpi_get_info(adev, &info, adapter, NULL))
+		return AE_OK;
+
+	i2c_acpi_register_device(adapter, adev, &info);
+
+	return AE_OK;
+}
+
+#define I2C_ACPI_MAX_SCAN_DEPTH 32
+
+/**
+ * i2c_acpi_register_devices - enumerate I2C slave devices behind adapter
+ * @adap: pointer to adapter
+ *
+ * Enumerate all I2C slave devices behind this adapter by walking the ACPI
+ * namespace. When a device is found it will be added to the Linux device
+ * model and bound to the corresponding ACPI handle.
+ */
+void i2c_acpi_register_devices(struct i2c_adapter *adap)
+{
+	acpi_status status;
+
+	if (!has_acpi_companion(&adap->dev))
+		return;
+
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+				     I2C_ACPI_MAX_SCAN_DEPTH,
+				     i2c_acpi_add_device, NULL,
+				     adap, NULL);
+	if (ACPI_FAILURE(status))
+		dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
+}
+
+static acpi_status i2c_acpi_lookup_speed(acpi_handle handle, u32 level,
+					   void *data, void **return_value)
+{
+	struct i2c_acpi_lookup *lookup = data;
+	struct acpi_device *adev;
+
+	if (acpi_bus_get_device(handle, &adev))
+		return AE_OK;
+
+	if (i2c_acpi_do_lookup(adev, lookup))
+		return AE_OK;
+
+	if (lookup->search_handle != lookup->adapter_handle)
+		return AE_OK;
+
+	if (lookup->speed <= lookup->min_speed)
+		lookup->min_speed = lookup->speed;
+
+	return AE_OK;
+}
+
+/**
+ * i2c_acpi_find_bus_speed - find I2C bus speed from ACPI
+ * @dev: The device owning the bus
+ *
+ * Find the I2C bus speed by walking the ACPI namespace for all I2C slaves
+ * devices connected to this bus and use the speed of slowest device.
+ *
+ * Returns the speed in Hz or zero
+ */
+u32 i2c_acpi_find_bus_speed(struct device *dev)
+{
+	struct i2c_acpi_lookup lookup;
+	struct i2c_board_info dummy;
+	acpi_status status;
+
+	if (!has_acpi_companion(dev))
+		return 0;
+
+	memset(&lookup, 0, sizeof(lookup));
+	lookup.search_handle = ACPI_HANDLE(dev);
+	lookup.min_speed = UINT_MAX;
+	lookup.info = &dummy;
+	lookup.index = -1;
+
+	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
+				     I2C_ACPI_MAX_SCAN_DEPTH,
+				     i2c_acpi_lookup_speed, NULL,
+				     &lookup, NULL);
+
+	if (ACPI_FAILURE(status)) {
+		dev_warn(dev, "unable to find I2C bus speed from ACPI\n");
+		return 0;
+	}
+
+	return lookup.min_speed != UINT_MAX ? lookup.min_speed : 0;
+}
+EXPORT_SYMBOL_GPL(i2c_acpi_find_bus_speed);
+
+static int i2c_acpi_match_adapter(struct device *dev, void *data)
+{
+	struct i2c_adapter *adapter = i2c_verify_adapter(dev);
+
+	if (!adapter)
+		return 0;
+
+	return ACPI_HANDLE(dev) == (acpi_handle)data;
+}
+
+static int i2c_acpi_match_device(struct device *dev, void *data)
+{
+	return ACPI_COMPANION(dev) == data;
+}
+
+static struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
+{
+	struct device *dev;
+
+	dev = bus_find_device(&i2c_bus_type, NULL, handle,
+			      i2c_acpi_match_adapter);
+	return dev ? i2c_verify_adapter(dev) : NULL;
+}
+
+static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev)
+{
+	struct device *dev;
+
+	dev = bus_find_device(&i2c_bus_type, NULL, adev, i2c_acpi_match_device);
+	return dev ? i2c_verify_client(dev) : NULL;
+}
+
+static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value,
+			   void *arg)
+{
+	struct acpi_device *adev = arg;
+	struct i2c_board_info info;
+	acpi_handle adapter_handle;
+	struct i2c_adapter *adapter;
+	struct i2c_client *client;
+
+	switch (value) {
+	case ACPI_RECONFIG_DEVICE_ADD:
+		if (i2c_acpi_get_info(adev, &info, NULL, &adapter_handle))
+			break;
+
+		adapter = i2c_acpi_find_adapter_by_handle(adapter_handle);
+		if (!adapter)
+			break;
+
+		i2c_acpi_register_device(adapter, adev, &info);
+		break;
+	case ACPI_RECONFIG_DEVICE_REMOVE:
+		if (!acpi_device_enumerated(adev))
+			break;
+
+		client = i2c_acpi_find_client_by_adev(adev);
+		if (!client)
+			break;
+
+		i2c_unregister_device(client);
+		put_device(&client->dev);
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+struct notifier_block i2c_acpi_notifier = {
+	.notifier_call = i2c_acpi_notify,
+};
+
+/**
+ * i2c_acpi_new_device - Create i2c-client for the Nth I2cSerialBus resource
+ * @dev:     Device owning the ACPI resources to get the client from
+ * @index:   Index of ACPI resource to get
+ * @info:    describes the I2C device; note this is modified (addr gets set)
+ * Context: can sleep
+ *
+ * By default the i2c subsys creates an i2c-client for the first I2cSerialBus
+ * resource of an acpi_device, but some acpi_devices have multiple I2cSerialBus
+ * resources, in that case this function can be used to create an i2c-client
+ * for other I2cSerialBus resources in the Current Resource Settings table.
+ *
+ * Also see i2c_new_device, which this function calls to create the i2c-client.
+ *
+ * Returns a pointer to the new i2c-client, or NULL if the adapter is not found.
+ */
+struct i2c_client *i2c_acpi_new_device(struct device *dev, int index,
+				       struct i2c_board_info *info)
+{
+	struct i2c_acpi_lookup lookup;
+	struct i2c_adapter *adapter;
+	struct acpi_device *adev;
+	LIST_HEAD(resource_list);
+	int ret;
+
+	adev = ACPI_COMPANION(dev);
+	if (!adev)
+		return NULL;
+
+	memset(&lookup, 0, sizeof(lookup));
+	lookup.info = info;
+	lookup.device_handle = acpi_device_handle(adev);
+	lookup.index = index;
+
+	ret = acpi_dev_get_resources(adev, &resource_list,
+				     i2c_acpi_fill_info, &lookup);
+	acpi_dev_free_resource_list(&resource_list);
+
+	if (ret < 0 || !info->addr)
+		return NULL;
+
+	adapter = i2c_acpi_find_adapter_by_handle(lookup.adapter_handle);
+	if (!adapter)
+		return NULL;
+
+	return i2c_new_device(adapter, info);
+}
+EXPORT_SYMBOL_GPL(i2c_acpi_new_device);
+
+#ifdef CONFIG_ACPI_I2C_OPREGION
+static int acpi_gsb_i2c_read_bytes(struct i2c_client *client,
+		u8 cmd, u8 *data, u8 data_len)
+{
+
+	struct i2c_msg msgs[2];
+	int ret;
+	u8 *buffer;
+
+	buffer = kzalloc(data_len, GFP_KERNEL);
+	if (!buffer)
+		return AE_NO_MEMORY;
+
+	msgs[0].addr = client->addr;
+	msgs[0].flags = client->flags;
+	msgs[0].len = 1;
+	msgs[0].buf = &cmd;
+
+	msgs[1].addr = client->addr;
+	msgs[1].flags = client->flags | I2C_M_RD;
+	msgs[1].len = data_len;
+	msgs[1].buf = buffer;
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret < 0)
+		dev_err(&client->adapter->dev, "i2c read failed\n");
+	else
+		memcpy(data, buffer, data_len);
+
+	kfree(buffer);
+	return ret;
+}
+
+static int acpi_gsb_i2c_write_bytes(struct i2c_client *client,
+		u8 cmd, u8 *data, u8 data_len)
+{
+
+	struct i2c_msg msgs[1];
+	u8 *buffer;
+	int ret = AE_OK;
+
+	buffer = kzalloc(data_len + 1, GFP_KERNEL);
+	if (!buffer)
+		return AE_NO_MEMORY;
+
+	buffer[0] = cmd;
+	memcpy(buffer + 1, data, data_len);
+
+	msgs[0].addr = client->addr;
+	msgs[0].flags = client->flags;
+	msgs[0].len = data_len + 1;
+	msgs[0].buf = buffer;
+
+	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
+	if (ret < 0)
+		dev_err(&client->adapter->dev, "i2c write failed\n");
+
+	kfree(buffer);
+	return ret;
+}
+
+static acpi_status
+i2c_acpi_space_handler(u32 function, acpi_physical_address command,
+			u32 bits, u64 *value64,
+			void *handler_context, void *region_context)
+{
+	struct gsb_buffer *gsb = (struct gsb_buffer *)value64;
+	struct i2c_acpi_handler_data *data = handler_context;
+	struct acpi_connection_info *info = &data->info;
+	struct acpi_resource_i2c_serialbus *sb;
+	struct i2c_adapter *adapter = data->adapter;
+	struct i2c_client *client;
+	struct acpi_resource *ares;
+	u32 accessor_type = function >> 16;
+	u8 action = function & ACPI_IO_MASK;
+	acpi_status ret;
+	int status;
+
+	ret = acpi_buffer_to_resource(info->connection, info->length, &ares);
+	if (ACPI_FAILURE(ret))
+		return ret;
+
+	client = kzalloc(sizeof(*client), GFP_KERNEL);
+	if (!client) {
+		ret = AE_NO_MEMORY;
+		goto err;
+	}
+
+	if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) {
+		ret = AE_BAD_PARAMETER;
+		goto err;
+	}
+
+	sb = &ares->data.i2c_serial_bus;
+	if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) {
+		ret = AE_BAD_PARAMETER;
+		goto err;
+	}
+
+	client->adapter = adapter;
+	client->addr = sb->slave_address;
+
+	if (sb->access_mode == ACPI_I2C_10BIT_MODE)
+		client->flags |= I2C_CLIENT_TEN;
+
+	switch (accessor_type) {
+	case ACPI_GSB_ACCESS_ATTRIB_SEND_RCV:
+		if (action == ACPI_READ) {
+			status = i2c_smbus_read_byte(client);
+			if (status >= 0) {
+				gsb->bdata = status;
+				status = 0;
+			}
+		} else {
+			status = i2c_smbus_write_byte(client, gsb->bdata);
+		}
+		break;
+
+	case ACPI_GSB_ACCESS_ATTRIB_BYTE:
+		if (action == ACPI_READ) {
+			status = i2c_smbus_read_byte_data(client, command);
+			if (status >= 0) {
+				gsb->bdata = status;
+				status = 0;
+			}
+		} else {
+			status = i2c_smbus_write_byte_data(client, command,
+					gsb->bdata);
+		}
+		break;
+
+	case ACPI_GSB_ACCESS_ATTRIB_WORD:
+		if (action == ACPI_READ) {
+			status = i2c_smbus_read_word_data(client, command);
+			if (status >= 0) {
+				gsb->wdata = status;
+				status = 0;
+			}
+		} else {
+			status = i2c_smbus_write_word_data(client, command,
+					gsb->wdata);
+		}
+		break;
+
+	case ACPI_GSB_ACCESS_ATTRIB_BLOCK:
+		if (action == ACPI_READ) {
+			status = i2c_smbus_read_block_data(client, command,
+					gsb->data);
+			if (status >= 0) {
+				gsb->len = status;
+				status = 0;
+			}
+		} else {
+			status = i2c_smbus_write_block_data(client, command,
+					gsb->len, gsb->data);
+		}
+		break;
+
+	case ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE:
+		if (action == ACPI_READ) {
+			status = acpi_gsb_i2c_read_bytes(client, command,
+					gsb->data, info->access_length);
+			if (status > 0)
+				status = 0;
+		} else {
+			status = acpi_gsb_i2c_write_bytes(client, command,
+					gsb->data, info->access_length);
+		}
+		break;
+
+	default:
+		dev_warn(&adapter->dev, "protocol 0x%02x not supported for client 0x%02x\n",
+			 accessor_type, client->addr);
+		ret = AE_BAD_PARAMETER;
+		goto err;
+	}
+
+	gsb->status = status;
+
+ err:
+	kfree(client);
+	ACPI_FREE(ares);
+	return ret;
+}
+
+
+int i2c_acpi_install_space_handler(struct i2c_adapter *adapter)
+{
+	acpi_handle handle;
+	struct i2c_acpi_handler_data *data;
+	acpi_status status;
+
+	if (!adapter->dev.parent)
+		return -ENODEV;
+
+	handle = ACPI_HANDLE(adapter->dev.parent);
+
+	if (!handle)
+		return -ENODEV;
+
+	data = kzalloc(sizeof(struct i2c_acpi_handler_data),
+			    GFP_KERNEL);
+	if (!data)
+		return -ENOMEM;
+
+	data->adapter = adapter;
+	status = acpi_bus_attach_private_data(handle, (void *)data);
+	if (ACPI_FAILURE(status)) {
+		kfree(data);
+		return -ENOMEM;
+	}
+
+	status = acpi_install_address_space_handler(handle,
+				ACPI_ADR_SPACE_GSBUS,
+				&i2c_acpi_space_handler,
+				NULL,
+				data);
+	if (ACPI_FAILURE(status)) {
+		dev_err(&adapter->dev, "Error installing i2c space handler\n");
+		acpi_bus_detach_private_data(handle);
+		kfree(data);
+		return -ENOMEM;
+	}
+
+	acpi_walk_dep_device_list(handle);
+	return 0;
+}
+
+void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter)
+{
+	acpi_handle handle;
+	struct i2c_acpi_handler_data *data;
+	acpi_status status;
+
+	if (!adapter->dev.parent)
+		return;
+
+	handle = ACPI_HANDLE(adapter->dev.parent);
+
+	if (!handle)
+		return;
+
+	acpi_remove_address_space_handler(handle,
+				ACPI_ADR_SPACE_GSBUS,
+				&i2c_acpi_space_handler);
+
+	status = acpi_bus_get_private_data(handle, (void **)&data);
+	if (ACPI_SUCCESS(status))
+		kfree(data);
+
+	acpi_bus_detach_private_data(handle);
+}
+#endif /* CONFIG_ACPI_I2C_OPREGION */
diff --git a/drivers/i2c/i2c-core.c b/drivers/i2c/i2c-core-base.c
index 82576aaccc90..c89dac7fd2e7 100644
--- a/drivers/i2c/i2c-core.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -1,36 +1,26 @@
-/* i2c-core.c - a device driver for the iic-bus interface		     */
-/* ------------------------------------------------------------------------- */
-/*   Copyright (C) 1995-99 Simon G. Vogl
-
-    This program is free software; you can redistribute it and/or modify
-    it under the terms of the GNU General Public License as published by
-    the Free Software Foundation; either version 2 of the License, or
-    (at your option) any later version.
-
-    This program is distributed in the hope that it will be useful,
-    but WITHOUT ANY WARRANTY; without even the implied warranty of
-    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-    GNU General Public License for more details.			     */
-/* ------------------------------------------------------------------------- */
-
-/* With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>.
-   All SMBus-related things are written by Frodo Looijaard <frodol@dds.nl>
-   SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and
-   Jean Delvare <jdelvare@suse.de>
-   Mux support by Rodolfo Giometti <giometti@enneenne.com> and
-   Michael Lawnick <michael.lawnick.ext@nsn.com>
-   OF support is copyright (c) 2008 Jochen Friedrich <jochen@scram.de>
-   (based on a previous patch from Jon Smirl <jonsmirl@gmail.com>) and
-   (c) 2013  Wolfram Sang <wsa@the-dreams.de>
-   I2C ACPI code Copyright (C) 2014 Intel Corp
-   Author: Lan Tianyu <tianyu.lan@intel.com>
-   I2C slave support (c) 2014 by Wolfram Sang <wsa@sang-engineering.com>
+/*
+ * Linux I2C core
+ *
+ * Copyright (C) 1995-99 Simon G. Vogl
+ *   With some changes from Kyösti Mälkki <kmalkki@cc.hut.fi>
+ *   Mux support by Rodolfo Giometti <giometti@enneenne.com> and
+ *   Michael Lawnick <michael.lawnick.ext@nsn.com>
+ *
+ * Copyright (C) 2013-2017 Wolfram Sang <wsa@the-dreams.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ *
+ * This program is distributed in the hope that it will be useful, but WITHOUT
+ * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
+ * FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
  */
 
 #define pr_fmt(fmt) "i2c-core: " fmt
 
 #include <dt-bindings/i2c/i2c.h>
-#include <linux/uaccess.h>
 #include <linux/acpi.h>
 #include <linux/clk/clk-conf.h>
 #include <linux/completion.h>
@@ -38,7 +28,6 @@
 #include <linux/err.h>
 #include <linux/errno.h>
 #include <linux/gpio.h>
-#include <linux/hardirq.h>
 #include <linux/i2c.h>
 #include <linux/idr.h>
 #include <linux/init.h>
@@ -68,9 +57,10 @@
 #define I2C_ADDR_7BITS_MAX	0x77
 #define I2C_ADDR_7BITS_COUNT	(I2C_ADDR_7BITS_MAX + 1)
 
-/* core_lock protects i2c_adapter_idr, and guarantees
-   that device detection, deletion of detected devices, and attach_adapter
-   calls are serialized */
+/*
+ * core_lock protects i2c_adapter_idr, and guarantees that device detection,
+ * deletion of detected devices, and attach_adapter calls are serialized
+ */
 static DEFINE_MUTEX(core_lock);
 static DEFINE_IDR(i2c_adapter_idr);
 
@@ -90,652 +80,6 @@ void i2c_transfer_trace_unreg(void)
 	static_key_slow_dec(&i2c_trace_msg);
 }
 
-#if defined(CONFIG_ACPI)
-struct i2c_acpi_handler_data {
-	struct acpi_connection_info info;
-	struct i2c_adapter *adapter;
-};
-
-struct gsb_buffer {
-	u8	status;
-	u8	len;
-	union {
-		u16	wdata;
-		u8	bdata;
-		u8	data[0];
-	};
-} __packed;
-
-struct i2c_acpi_lookup {
-	struct i2c_board_info *info;
-	acpi_handle adapter_handle;
-	acpi_handle device_handle;
-	acpi_handle search_handle;
-	int n;
-	int index;
-	u32 speed;
-	u32 min_speed;
-};
-
-static int i2c_acpi_fill_info(struct acpi_resource *ares, void *data)
-{
-	struct i2c_acpi_lookup *lookup = data;
-	struct i2c_board_info *info = lookup->info;
-	struct acpi_resource_i2c_serialbus *sb;
-	acpi_status status;
-
-	if (info->addr || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS)
-		return 1;
-
-	sb = &ares->data.i2c_serial_bus;
-	if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C)
-		return 1;
-
-	if (lookup->index != -1 && lookup->n++ != lookup->index)
-		return 1;
-
-	status = acpi_get_handle(lookup->device_handle,
-				 sb->resource_source.string_ptr,
-				 &lookup->adapter_handle);
-	if (!ACPI_SUCCESS(status))
-		return 1;
-
-	info->addr = sb->slave_address;
-	lookup->speed = sb->connection_speed;
-	if (sb->access_mode == ACPI_I2C_10BIT_MODE)
-		info->flags |= I2C_CLIENT_TEN;
-
-	return 1;
-}
-
-static int i2c_acpi_do_lookup(struct acpi_device *adev,
-			      struct i2c_acpi_lookup *lookup)
-{
-	struct i2c_board_info *info = lookup->info;
-	struct list_head resource_list;
-	int ret;
-
-	if (acpi_bus_get_status(adev) || !adev->status.present ||
-	    acpi_device_enumerated(adev))
-		return -EINVAL;
-
-	memset(info, 0, sizeof(*info));
-	lookup->device_handle = acpi_device_handle(adev);
-
-	/* Look up for I2cSerialBus resource */
-	INIT_LIST_HEAD(&resource_list);
-	ret = acpi_dev_get_resources(adev, &resource_list,
-				     i2c_acpi_fill_info, lookup);
-	acpi_dev_free_resource_list(&resource_list);
-
-	if (ret < 0 || !info->addr)
-		return -EINVAL;
-
-	return 0;
-}
-
-static int i2c_acpi_get_info(struct acpi_device *adev,
-			     struct i2c_board_info *info,
-			     struct i2c_adapter *adapter,
-			     acpi_handle *adapter_handle)
-{
-	struct list_head resource_list;
-	struct resource_entry *entry;
-	struct i2c_acpi_lookup lookup;
-	int ret;
-
-	memset(&lookup, 0, sizeof(lookup));
-	lookup.info = info;
-	lookup.index = -1;
-
-	ret = i2c_acpi_do_lookup(adev, &lookup);
-	if (ret)
-		return ret;
-
-	if (adapter) {
-		/* The adapter must match the one in I2cSerialBus() connector */
-		if (ACPI_HANDLE(&adapter->dev) != lookup.adapter_handle)
-			return -ENODEV;
-	} else {
-		struct acpi_device *adapter_adev;
-
-		/* The adapter must be present */
-		if (acpi_bus_get_device(lookup.adapter_handle, &adapter_adev))
-			return -ENODEV;
-		if (acpi_bus_get_status(adapter_adev) ||
-		    !adapter_adev->status.present)
-			return -ENODEV;
-	}
-
-	info->fwnode = acpi_fwnode_handle(adev);
-	if (adapter_handle)
-		*adapter_handle = lookup.adapter_handle;
-
-	/* Then fill IRQ number if any */
-	INIT_LIST_HEAD(&resource_list);
-	ret = acpi_dev_get_resources(adev, &resource_list, NULL, NULL);
-	if (ret < 0)
-		return -EINVAL;
-
-	resource_list_for_each_entry(entry, &resource_list) {
-		if (resource_type(entry->res) == IORESOURCE_IRQ) {
-			info->irq = entry->res->start;
-			break;
-		}
-	}
-
-	acpi_dev_free_resource_list(&resource_list);
-
-	acpi_set_modalias(adev, dev_name(&adev->dev), info->type,
-			  sizeof(info->type));
-
-	return 0;
-}
-
-static void i2c_acpi_register_device(struct i2c_adapter *adapter,
-				     struct acpi_device *adev,
-				     struct i2c_board_info *info)
-{
-	adev->power.flags.ignore_parent = true;
-	acpi_device_set_enumerated(adev);
-
-	if (!i2c_new_device(adapter, info)) {
-		adev->power.flags.ignore_parent = false;
-		dev_err(&adapter->dev,
-			"failed to add I2C device %s from ACPI\n",
-			dev_name(&adev->dev));
-	}
-}
-
-static acpi_status i2c_acpi_add_device(acpi_handle handle, u32 level,
-				       void *data, void **return_value)
-{
-	struct i2c_adapter *adapter = data;
-	struct acpi_device *adev;
-	struct i2c_board_info info;
-
-	if (acpi_bus_get_device(handle, &adev))
-		return AE_OK;
-
-	if (i2c_acpi_get_info(adev, &info, adapter, NULL))
-		return AE_OK;
-
-	i2c_acpi_register_device(adapter, adev, &info);
-
-	return AE_OK;
-}
-
-#define I2C_ACPI_MAX_SCAN_DEPTH 32
-
-/**
- * i2c_acpi_register_devices - enumerate I2C slave devices behind adapter
- * @adap: pointer to adapter
- *
- * Enumerate all I2C slave devices behind this adapter by walking the ACPI
- * namespace. When a device is found it will be added to the Linux device
- * model and bound to the corresponding ACPI handle.
- */
-static void i2c_acpi_register_devices(struct i2c_adapter *adap)
-{
-	acpi_status status;
-
-	if (!has_acpi_companion(&adap->dev))
-		return;
-
-	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
-				     I2C_ACPI_MAX_SCAN_DEPTH,
-				     i2c_acpi_add_device, NULL,
-				     adap, NULL);
-	if (ACPI_FAILURE(status))
-		dev_warn(&adap->dev, "failed to enumerate I2C slaves\n");
-}
-
-static acpi_status i2c_acpi_lookup_speed(acpi_handle handle, u32 level,
-					   void *data, void **return_value)
-{
-	struct i2c_acpi_lookup *lookup = data;
-	struct acpi_device *adev;
-
-	if (acpi_bus_get_device(handle, &adev))
-		return AE_OK;
-
-	if (i2c_acpi_do_lookup(adev, lookup))
-		return AE_OK;
-
-	if (lookup->search_handle != lookup->adapter_handle)
-		return AE_OK;
-
-	if (lookup->speed <= lookup->min_speed)
-		lookup->min_speed = lookup->speed;
-
-	return AE_OK;
-}
-
-/**
- * i2c_acpi_find_bus_speed - find I2C bus speed from ACPI
- * @dev: The device owning the bus
- *
- * Find the I2C bus speed by walking the ACPI namespace for all I2C slaves
- * devices connected to this bus and use the speed of slowest device.
- *
- * Returns the speed in Hz or zero
- */
-u32 i2c_acpi_find_bus_speed(struct device *dev)
-{
-	struct i2c_acpi_lookup lookup;
-	struct i2c_board_info dummy;
-	acpi_status status;
-
-	if (!has_acpi_companion(dev))
-		return 0;
-
-	memset(&lookup, 0, sizeof(lookup));
-	lookup.search_handle = ACPI_HANDLE(dev);
-	lookup.min_speed = UINT_MAX;
-	lookup.info = &dummy;
-	lookup.index = -1;
-
-	status = acpi_walk_namespace(ACPI_TYPE_DEVICE, ACPI_ROOT_OBJECT,
-				     I2C_ACPI_MAX_SCAN_DEPTH,
-				     i2c_acpi_lookup_speed, NULL,
-				     &lookup, NULL);
-
-	if (ACPI_FAILURE(status)) {
-		dev_warn(dev, "unable to find I2C bus speed from ACPI\n");
-		return 0;
-	}
-
-	return lookup.min_speed != UINT_MAX ? lookup.min_speed : 0;
-}
-EXPORT_SYMBOL_GPL(i2c_acpi_find_bus_speed);
-
-static int i2c_acpi_match_adapter(struct device *dev, void *data)
-{
-	struct i2c_adapter *adapter = i2c_verify_adapter(dev);
-
-	if (!adapter)
-		return 0;
-
-	return ACPI_HANDLE(dev) == (acpi_handle)data;
-}
-
-static int i2c_acpi_match_device(struct device *dev, void *data)
-{
-	return ACPI_COMPANION(dev) == data;
-}
-
-static struct i2c_adapter *i2c_acpi_find_adapter_by_handle(acpi_handle handle)
-{
-	struct device *dev;
-
-	dev = bus_find_device(&i2c_bus_type, NULL, handle,
-			      i2c_acpi_match_adapter);
-	return dev ? i2c_verify_adapter(dev) : NULL;
-}
-
-static struct i2c_client *i2c_acpi_find_client_by_adev(struct acpi_device *adev)
-{
-	struct device *dev;
-
-	dev = bus_find_device(&i2c_bus_type, NULL, adev, i2c_acpi_match_device);
-	return dev ? i2c_verify_client(dev) : NULL;
-}
-
-static int i2c_acpi_notify(struct notifier_block *nb, unsigned long value,
-			   void *arg)
-{
-	struct acpi_device *adev = arg;
-	struct i2c_board_info info;
-	acpi_handle adapter_handle;
-	struct i2c_adapter *adapter;
-	struct i2c_client *client;
-
-	switch (value) {
-	case ACPI_RECONFIG_DEVICE_ADD:
-		if (i2c_acpi_get_info(adev, &info, NULL, &adapter_handle))
-			break;
-
-		adapter = i2c_acpi_find_adapter_by_handle(adapter_handle);
-		if (!adapter)
-			break;
-
-		i2c_acpi_register_device(adapter, adev, &info);
-		break;
-	case ACPI_RECONFIG_DEVICE_REMOVE:
-		if (!acpi_device_enumerated(adev))
-			break;
-
-		client = i2c_acpi_find_client_by_adev(adev);
-		if (!client)
-			break;
-
-		i2c_unregister_device(client);
-		put_device(&client->dev);
-		break;
-	}
-
-	return NOTIFY_OK;
-}
-
-static struct notifier_block i2c_acpi_notifier = {
-	.notifier_call = i2c_acpi_notify,
-};
-
-/**
- * i2c_acpi_new_device - Create i2c-client for the Nth I2cSerialBus resource
- * @dev:     Device owning the ACPI resources to get the client from
- * @index:   Index of ACPI resource to get
- * @info:    describes the I2C device; note this is modified (addr gets set)
- * Context: can sleep
- *
- * By default the i2c subsys creates an i2c-client for the first I2cSerialBus
- * resource of an acpi_device, but some acpi_devices have multiple I2cSerialBus
- * resources, in that case this function can be used to create an i2c-client
- * for other I2cSerialBus resources in the Current Resource Settings table.
- *
- * Also see i2c_new_device, which this function calls to create the i2c-client.
- *
- * Returns a pointer to the new i2c-client, or NULL if the adapter is not found.
- */
-struct i2c_client *i2c_acpi_new_device(struct device *dev, int index,
-				       struct i2c_board_info *info)
-{
-	struct i2c_acpi_lookup lookup;
-	struct i2c_adapter *adapter;
-	struct acpi_device *adev;
-	LIST_HEAD(resource_list);
-	int ret;
-
-	adev = ACPI_COMPANION(dev);
-	if (!adev)
-		return NULL;
-
-	memset(&lookup, 0, sizeof(lookup));
-	lookup.info = info;
-	lookup.device_handle = acpi_device_handle(adev);
-	lookup.index = index;
-
-	ret = acpi_dev_get_resources(adev, &resource_list,
-				     i2c_acpi_fill_info, &lookup);
-	acpi_dev_free_resource_list(&resource_list);
-
-	if (ret < 0 || !info->addr)
-		return NULL;
-
-	adapter = i2c_acpi_find_adapter_by_handle(lookup.adapter_handle);
-	if (!adapter)
-		return NULL;
-
-	return i2c_new_device(adapter, info);
-}
-EXPORT_SYMBOL_GPL(i2c_acpi_new_device);
-#else /* CONFIG_ACPI */
-static inline void i2c_acpi_register_devices(struct i2c_adapter *adap) { }
-extern struct notifier_block i2c_acpi_notifier;
-#endif /* CONFIG_ACPI */
-
-#ifdef CONFIG_ACPI_I2C_OPREGION
-static int acpi_gsb_i2c_read_bytes(struct i2c_client *client,
-		u8 cmd, u8 *data, u8 data_len)
-{
-
-	struct i2c_msg msgs[2];
-	int ret;
-	u8 *buffer;
-
-	buffer = kzalloc(data_len, GFP_KERNEL);
-	if (!buffer)
-		return AE_NO_MEMORY;
-
-	msgs[0].addr = client->addr;
-	msgs[0].flags = client->flags;
-	msgs[0].len = 1;
-	msgs[0].buf = &cmd;
-
-	msgs[1].addr = client->addr;
-	msgs[1].flags = client->flags | I2C_M_RD;
-	msgs[1].len = data_len;
-	msgs[1].buf = buffer;
-
-	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
-	if (ret < 0)
-		dev_err(&client->adapter->dev, "i2c read failed\n");
-	else
-		memcpy(data, buffer, data_len);
-
-	kfree(buffer);
-	return ret;
-}
-
-static int acpi_gsb_i2c_write_bytes(struct i2c_client *client,
-		u8 cmd, u8 *data, u8 data_len)
-{
-
-	struct i2c_msg msgs[1];
-	u8 *buffer;
-	int ret = AE_OK;
-
-	buffer = kzalloc(data_len + 1, GFP_KERNEL);
-	if (!buffer)
-		return AE_NO_MEMORY;
-
-	buffer[0] = cmd;
-	memcpy(buffer + 1, data, data_len);
-
-	msgs[0].addr = client->addr;
-	msgs[0].flags = client->flags;
-	msgs[0].len = data_len + 1;
-	msgs[0].buf = buffer;
-
-	ret = i2c_transfer(client->adapter, msgs, ARRAY_SIZE(msgs));
-	if (ret < 0)
-		dev_err(&client->adapter->dev, "i2c write failed\n");
-
-	kfree(buffer);
-	return ret;
-}
-
-static acpi_status
-i2c_acpi_space_handler(u32 function, acpi_physical_address command,
-			u32 bits, u64 *value64,
-			void *handler_context, void *region_context)
-{
-	struct gsb_buffer *gsb = (struct gsb_buffer *)value64;
-	struct i2c_acpi_handler_data *data = handler_context;
-	struct acpi_connection_info *info = &data->info;
-	struct acpi_resource_i2c_serialbus *sb;
-	struct i2c_adapter *adapter = data->adapter;
-	struct i2c_client *client;
-	struct acpi_resource *ares;
-	u32 accessor_type = function >> 16;
-	u8 action = function & ACPI_IO_MASK;
-	acpi_status ret;
-	int status;
-
-	ret = acpi_buffer_to_resource(info->connection, info->length, &ares);
-	if (ACPI_FAILURE(ret))
-		return ret;
-
-	client = kzalloc(sizeof(*client), GFP_KERNEL);
-	if (!client) {
-		ret = AE_NO_MEMORY;
-		goto err;
-	}
-
-	if (!value64 || ares->type != ACPI_RESOURCE_TYPE_SERIAL_BUS) {
-		ret = AE_BAD_PARAMETER;
-		goto err;
-	}
-
-	sb = &ares->data.i2c_serial_bus;
-	if (sb->type != ACPI_RESOURCE_SERIAL_TYPE_I2C) {
-		ret = AE_BAD_PARAMETER;
-		goto err;
-	}
-
-	client->adapter = adapter;
-	client->addr = sb->slave_address;
-
-	if (sb->access_mode == ACPI_I2C_10BIT_MODE)
-		client->flags |= I2C_CLIENT_TEN;
-
-	switch (accessor_type) {
-	case ACPI_GSB_ACCESS_ATTRIB_SEND_RCV:
-		if (action == ACPI_READ) {
-			status = i2c_smbus_read_byte(client);
-			if (status >= 0) {
-				gsb->bdata = status;
-				status = 0;
-			}
-		} else {
-			status = i2c_smbus_write_byte(client, gsb->bdata);
-		}
-		break;
-
-	case ACPI_GSB_ACCESS_ATTRIB_BYTE:
-		if (action == ACPI_READ) {
-			status = i2c_smbus_read_byte_data(client, command);
-			if (status >= 0) {
-				gsb->bdata = status;
-				status = 0;
-			}
-		} else {
-			status = i2c_smbus_write_byte_data(client, command,
-					gsb->bdata);
-		}
-		break;
-
-	case ACPI_GSB_ACCESS_ATTRIB_WORD:
-		if (action == ACPI_READ) {
-			status = i2c_smbus_read_word_data(client, command);
-			if (status >= 0) {
-				gsb->wdata = status;
-				status = 0;
-			}
-		} else {
-			status = i2c_smbus_write_word_data(client, command,
-					gsb->wdata);
-		}
-		break;
-
-	case ACPI_GSB_ACCESS_ATTRIB_BLOCK:
-		if (action == ACPI_READ) {
-			status = i2c_smbus_read_block_data(client, command,
-					gsb->data);
-			if (status >= 0) {
-				gsb->len = status;
-				status = 0;
-			}
-		} else {
-			status = i2c_smbus_write_block_data(client, command,
-					gsb->len, gsb->data);
-		}
-		break;
-
-	case ACPI_GSB_ACCESS_ATTRIB_MULTIBYTE:
-		if (action == ACPI_READ) {
-			status = acpi_gsb_i2c_read_bytes(client, command,
-					gsb->data, info->access_length);
-			if (status > 0)
-				status = 0;
-		} else {
-			status = acpi_gsb_i2c_write_bytes(client, command,
-					gsb->data, info->access_length);
-		}
-		break;
-
-	default:
-		dev_warn(&adapter->dev, "protocol 0x%02x not supported for client 0x%02x\n",
-			 accessor_type, client->addr);
-		ret = AE_BAD_PARAMETER;
-		goto err;
-	}
-
-	gsb->status = status;
-
- err:
-	kfree(client);
-	ACPI_FREE(ares);
-	return ret;
-}
-
-
-static int i2c_acpi_install_space_handler(struct i2c_adapter *adapter)
-{
-	acpi_handle handle;
-	struct i2c_acpi_handler_data *data;
-	acpi_status status;
-
-	if (!adapter->dev.parent)
-		return -ENODEV;
-
-	handle = ACPI_HANDLE(adapter->dev.parent);
-
-	if (!handle)
-		return -ENODEV;
-
-	data = kzalloc(sizeof(struct i2c_acpi_handler_data),
-			    GFP_KERNEL);
-	if (!data)
-		return -ENOMEM;
-
-	data->adapter = adapter;
-	status = acpi_bus_attach_private_data(handle, (void *)data);
-	if (ACPI_FAILURE(status)) {
-		kfree(data);
-		return -ENOMEM;
-	}
-
-	status = acpi_install_address_space_handler(handle,
-				ACPI_ADR_SPACE_GSBUS,
-				&i2c_acpi_space_handler,
-				NULL,
-				data);
-	if (ACPI_FAILURE(status)) {
-		dev_err(&adapter->dev, "Error installing i2c space handler\n");
-		acpi_bus_detach_private_data(handle);
-		kfree(data);
-		return -ENOMEM;
-	}
-
-	acpi_walk_dep_device_list(handle);
-	return 0;
-}
-
-static void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter)
-{
-	acpi_handle handle;
-	struct i2c_acpi_handler_data *data;
-	acpi_status status;
-
-	if (!adapter->dev.parent)
-		return;
-
-	handle = ACPI_HANDLE(adapter->dev.parent);
-
-	if (!handle)
-		return;
-
-	acpi_remove_address_space_handler(handle,
-				ACPI_ADR_SPACE_GSBUS,
-				&i2c_acpi_space_handler);
-
-	status = acpi_bus_get_private_data(handle, (void **)&data);
-	if (ACPI_SUCCESS(status))
-		kfree(data);
-
-	acpi_bus_detach_private_data(handle);
-}
-#else /* CONFIG_ACPI_I2C_OPREGION */
-static inline void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter)
-{ }
-
-static inline int i2c_acpi_install_space_handler(struct i2c_adapter *adapter)
-{ return 0; }
-#endif /* CONFIG_ACPI_I2C_OPREGION */
-
-/* ------------------------------------------------------------------------- */
-
 const struct i2c_device_id *i2c_match_id(const struct i2c_device_id *id,
 						const struct i2c_client *client)
 {
@@ -1195,7 +539,7 @@ static unsigned short i2c_encode_flags_to_addr(struct i2c_client *client)
 
 /* This is a permissive address validity check, I2C address map constraints
  * are purposely not enforced, except for the general call address. */
-static int i2c_check_addr_validity(unsigned addr, unsigned short flags)
+int i2c_check_addr_validity(unsigned addr, unsigned short flags)
 {
 	if (flags & I2C_CLIENT_TEN) {
 		/* 10-bit address, all values are valid */
@@ -1213,7 +557,7 @@ static int i2c_check_addr_validity(unsigned addr, unsigned short flags)
  * device uses a reserved address, then it shouldn't be probed. 7-bit
  * addressing is assumed, 10-bit address devices are rare and should be
  * explicitly enumerated. */
-static int i2c_check_7bit_addr_validity_strict(unsigned short addr)
+int i2c_check_7bit_addr_validity_strict(unsigned short addr)
 {
 	/*
 	 * Reserved addresses per I2C specification:
@@ -1764,210 +1108,6 @@ static void i2c_scan_static_board_info(struct i2c_adapter *adapter)
 	up_read(&__i2c_board_lock);
 }
 
-/* OF support code */
-
-#if IS_ENABLED(CONFIG_OF)
-static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap,
-						 struct device_node *node)
-{
-	struct i2c_client *result;
-	struct i2c_board_info info = {};
-	struct dev_archdata dev_ad = {};
-	const __be32 *addr_be;
-	u32 addr;
-	int len;
-
-	dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name);
-
-	if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
-		dev_err(&adap->dev, "of_i2c: modalias failure on %s\n",
-			node->full_name);
-		return ERR_PTR(-EINVAL);
-	}
-
-	addr_be = of_get_property(node, "reg", &len);
-	if (!addr_be || (len < sizeof(*addr_be))) {
-		dev_err(&adap->dev, "of_i2c: invalid reg on %s\n",
-			node->full_name);
-		return ERR_PTR(-EINVAL);
-	}
-
-	addr = be32_to_cpup(addr_be);
-	if (addr & I2C_TEN_BIT_ADDRESS) {
-		addr &= ~I2C_TEN_BIT_ADDRESS;
-		info.flags |= I2C_CLIENT_TEN;
-	}
-
-	if (addr & I2C_OWN_SLAVE_ADDRESS) {
-		addr &= ~I2C_OWN_SLAVE_ADDRESS;
-		info.flags |= I2C_CLIENT_SLAVE;
-	}
-
-	if (i2c_check_addr_validity(addr, info.flags)) {
-		dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n",
-			addr, node->full_name);
-		return ERR_PTR(-EINVAL);
-	}
-
-	info.addr = addr;
-	info.of_node = of_node_get(node);
-	info.archdata = &dev_ad;
-
-	if (of_property_read_bool(node, "host-notify"))
-		info.flags |= I2C_CLIENT_HOST_NOTIFY;
-
-	if (of_get_property(node, "wakeup-source", NULL))
-		info.flags |= I2C_CLIENT_WAKE;
-
-	result = i2c_new_device(adap, &info);
-	if (result == NULL) {
-		dev_err(&adap->dev, "of_i2c: Failure registering %s\n",
-			node->full_name);
-		of_node_put(node);
-		return ERR_PTR(-EINVAL);
-	}
-	return result;
-}
-
-static void of_i2c_register_devices(struct i2c_adapter *adap)
-{
-	struct device_node *bus, *node;
-	struct i2c_client *client;
-
-	/* Only register child devices if the adapter has a node pointer set */
-	if (!adap->dev.of_node)
-		return;
-
-	dev_dbg(&adap->dev, "of_i2c: walking child nodes\n");
-
-	bus = of_get_child_by_name(adap->dev.of_node, "i2c-bus");
-	if (!bus)
-		bus = of_node_get(adap->dev.of_node);
-
-	for_each_available_child_of_node(bus, node) {
-		if (of_node_test_and_set_flag(node, OF_POPULATED))
-			continue;
-
-		client = of_i2c_register_device(adap, node);
-		if (IS_ERR(client)) {
-			dev_warn(&adap->dev,
-				 "Failed to create I2C device for %s\n",
-				 node->full_name);
-			of_node_clear_flag(node, OF_POPULATED);
-		}
-	}
-
-	of_node_put(bus);
-}
-
-static int of_dev_node_match(struct device *dev, void *data)
-{
-	return dev->of_node == data;
-}
-
-/* must call put_device() when done with returned i2c_client device */
-struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
-{
-	struct device *dev;
-	struct i2c_client *client;
-
-	dev = bus_find_device(&i2c_bus_type, NULL, node, of_dev_node_match);
-	if (!dev)
-		return NULL;
-
-	client = i2c_verify_client(dev);
-	if (!client)
-		put_device(dev);
-
-	return client;
-}
-EXPORT_SYMBOL(of_find_i2c_device_by_node);
-
-/* must call put_device() when done with returned i2c_adapter device */
-struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node)
-{
-	struct device *dev;
-	struct i2c_adapter *adapter;
-
-	dev = bus_find_device(&i2c_bus_type, NULL, node, of_dev_node_match);
-	if (!dev)
-		return NULL;
-
-	adapter = i2c_verify_adapter(dev);
-	if (!adapter)
-		put_device(dev);
-
-	return adapter;
-}
-EXPORT_SYMBOL(of_find_i2c_adapter_by_node);
-
-/* must call i2c_put_adapter() when done with returned i2c_adapter device */
-struct i2c_adapter *of_get_i2c_adapter_by_node(struct device_node *node)
-{
-	struct i2c_adapter *adapter;
-
-	adapter = of_find_i2c_adapter_by_node(node);
-	if (!adapter)
-		return NULL;
-
-	if (!try_module_get(adapter->owner)) {
-		put_device(&adapter->dev);
-		adapter = NULL;
-	}
-
-	return adapter;
-}
-EXPORT_SYMBOL(of_get_i2c_adapter_by_node);
-
-static const struct of_device_id*
-i2c_of_match_device_sysfs(const struct of_device_id *matches,
-				  struct i2c_client *client)
-{
-	const char *name;
-
-	for (; matches->compatible[0]; matches++) {
-		/*
-		 * Adding devices through the i2c sysfs interface provides us
-		 * a string to match which may be compatible with the device
-		 * tree compatible strings, however with no actual of_node the
-		 * of_match_device() will not match
-		 */
-		if (sysfs_streq(client->name, matches->compatible))
-			return matches;
-
-		name = strchr(matches->compatible, ',');
-		if (!name)
-			name = matches->compatible;
-		else
-			name++;
-
-		if (sysfs_streq(client->name, name))
-			return matches;
-	}
-
-	return NULL;
-}
-
-const struct of_device_id
-*i2c_of_match_device(const struct of_device_id *matches,
-		     struct i2c_client *client)
-{
-	const struct of_device_id *match;
-
-	if (!(client && matches))
-		return NULL;
-
-	match = of_match_device(matches, &client->dev);
-	if (match)
-		return match;
-
-	return i2c_of_match_device_sysfs(matches, client);
-}
-EXPORT_SYMBOL_GPL(i2c_of_match_device);
-#else
-static void of_i2c_register_devices(struct i2c_adapter *adap) { }
-#endif /* CONFIG_OF */
-
 static int i2c_do_add_adapter(struct i2c_driver *driver,
 			      struct i2c_adapter *adap)
 {
@@ -2562,62 +1702,6 @@ void i2c_clients_command(struct i2c_adapter *adap, unsigned int cmd, void *arg)
 }
 EXPORT_SYMBOL(i2c_clients_command);
 
-#if IS_ENABLED(CONFIG_OF_DYNAMIC)
-static int of_i2c_notify(struct notifier_block *nb, unsigned long action,
-			 void *arg)
-{
-	struct of_reconfig_data *rd = arg;
-	struct i2c_adapter *adap;
-	struct i2c_client *client;
-
-	switch (of_reconfig_get_state_change(action, rd)) {
-	case OF_RECONFIG_CHANGE_ADD:
-		adap = of_find_i2c_adapter_by_node(rd->dn->parent);
-		if (adap == NULL)
-			return NOTIFY_OK;	/* not for us */
-
-		if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) {
-			put_device(&adap->dev);
-			return NOTIFY_OK;
-		}
-
-		client = of_i2c_register_device(adap, rd->dn);
-		put_device(&adap->dev);
-
-		if (IS_ERR(client)) {
-			dev_err(&adap->dev, "failed to create client for '%s'\n",
-				 rd->dn->full_name);
-			of_node_clear_flag(rd->dn, OF_POPULATED);
-			return notifier_from_errno(PTR_ERR(client));
-		}
-		break;
-	case OF_RECONFIG_CHANGE_REMOVE:
-		/* already depopulated? */
-		if (!of_node_check_flag(rd->dn, OF_POPULATED))
-			return NOTIFY_OK;
-
-		/* find our device by node */
-		client = of_find_i2c_device_by_node(rd->dn);
-		if (client == NULL)
-			return NOTIFY_OK;	/* no? not meant for us */
-
-		/* unregister takes one ref away */
-		i2c_unregister_device(client);
-
-		/* and put the reference of the find */
-		put_device(&client->dev);
-		break;
-	}
-
-	return NOTIFY_OK;
-}
-static struct notifier_block i2c_of_notifier = {
-	.notifier_call = of_i2c_notify,
-};
-#else
-extern struct notifier_block i2c_of_notifier;
-#endif /* CONFIG_OF_DYNAMIC */
-
 static int __init i2c_init(void)
 {
 	int retval;
@@ -3156,676 +2240,6 @@ void i2c_put_adapter(struct i2c_adapter *adap)
 }
 EXPORT_SYMBOL(i2c_put_adapter);
 
-/* The SMBus parts */
-
-#define POLY    (0x1070U << 3)
-static u8 crc8(u16 data)
-{
-	int i;
-
-	for (i = 0; i < 8; i++) {
-		if (data & 0x8000)
-			data = data ^ POLY;
-		data = data << 1;
-	}
-	return (u8)(data >> 8);
-}
-
-/* Incremental CRC8 over count bytes in the array pointed to by p */
-static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count)
-{
-	int i;
-
-	for (i = 0; i < count; i++)
-		crc = crc8((crc ^ p[i]) << 8);
-	return crc;
-}
-
-/* Assume a 7-bit address, which is reasonable for SMBus */
-static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg)
-{
-	/* The address will be sent first */
-	u8 addr = i2c_8bit_addr_from_msg(msg);
-	pec = i2c_smbus_pec(pec, &addr, 1);
-
-	/* The data buffer follows */
-	return i2c_smbus_pec(pec, msg->buf, msg->len);
-}
-
-/* Used for write only transactions */
-static inline void i2c_smbus_add_pec(struct i2c_msg *msg)
-{
-	msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg);
-	msg->len++;
-}
-
-/* Return <0 on CRC error
-   If there was a write before this read (most cases) we need to take the
-   partial CRC from the write part into account.
-   Note that this function does modify the message (we need to decrease the
-   message length to hide the CRC byte from the caller). */
-static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg)
-{
-	u8 rpec = msg->buf[--msg->len];
-	cpec = i2c_smbus_msg_pec(cpec, msg);
-
-	if (rpec != cpec) {
-		pr_debug("Bad PEC 0x%02x vs. 0x%02x\n",
-			rpec, cpec);
-		return -EBADMSG;
-	}
-	return 0;
-}
-
-/**
- * i2c_smbus_read_byte - SMBus "receive byte" protocol
- * @client: Handle to slave device
- *
- * This executes the SMBus "receive byte" protocol, returning negative errno
- * else the byte received from the device.
- */
-s32 i2c_smbus_read_byte(const struct i2c_client *client)
-{
-	union i2c_smbus_data data;
-	int status;
-
-	status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
-				I2C_SMBUS_READ, 0,
-				I2C_SMBUS_BYTE, &data);
-	return (status < 0) ? status : data.byte;
-}
-EXPORT_SYMBOL(i2c_smbus_read_byte);
-
-/**
- * i2c_smbus_write_byte - SMBus "send byte" protocol
- * @client: Handle to slave device
- * @value: Byte to be sent
- *
- * This executes the SMBus "send byte" protocol, returning negative errno
- * else zero on success.
- */
-s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value)
-{
-	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
-	                      I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
-}
-EXPORT_SYMBOL(i2c_smbus_write_byte);
-
-/**
- * i2c_smbus_read_byte_data - SMBus "read byte" protocol
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- *
- * This executes the SMBus "read byte" protocol, returning negative errno
- * else a data byte received from the device.
- */
-s32 i2c_smbus_read_byte_data(const struct i2c_client *client, u8 command)
-{
-	union i2c_smbus_data data;
-	int status;
-
-	status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
-				I2C_SMBUS_READ, command,
-				I2C_SMBUS_BYTE_DATA, &data);
-	return (status < 0) ? status : data.byte;
-}
-EXPORT_SYMBOL(i2c_smbus_read_byte_data);
-
-/**
- * i2c_smbus_write_byte_data - SMBus "write byte" protocol
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- * @value: Byte being written
- *
- * This executes the SMBus "write byte" protocol, returning negative errno
- * else zero on success.
- */
-s32 i2c_smbus_write_byte_data(const struct i2c_client *client, u8 command,
-			      u8 value)
-{
-	union i2c_smbus_data data;
-	data.byte = value;
-	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
-			      I2C_SMBUS_WRITE, command,
-			      I2C_SMBUS_BYTE_DATA, &data);
-}
-EXPORT_SYMBOL(i2c_smbus_write_byte_data);
-
-/**
- * i2c_smbus_read_word_data - SMBus "read word" protocol
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- *
- * This executes the SMBus "read word" protocol, returning negative errno
- * else a 16-bit unsigned "word" received from the device.
- */
-s32 i2c_smbus_read_word_data(const struct i2c_client *client, u8 command)
-{
-	union i2c_smbus_data data;
-	int status;
-
-	status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
-				I2C_SMBUS_READ, command,
-				I2C_SMBUS_WORD_DATA, &data);
-	return (status < 0) ? status : data.word;
-}
-EXPORT_SYMBOL(i2c_smbus_read_word_data);
-
-/**
- * i2c_smbus_write_word_data - SMBus "write word" protocol
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- * @value: 16-bit "word" being written
- *
- * This executes the SMBus "write word" protocol, returning negative errno
- * else zero on success.
- */
-s32 i2c_smbus_write_word_data(const struct i2c_client *client, u8 command,
-			      u16 value)
-{
-	union i2c_smbus_data data;
-	data.word = value;
-	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
-			      I2C_SMBUS_WRITE, command,
-			      I2C_SMBUS_WORD_DATA, &data);
-}
-EXPORT_SYMBOL(i2c_smbus_write_word_data);
-
-/**
- * i2c_smbus_read_block_data - SMBus "block read" protocol
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- * @values: Byte array into which data will be read; big enough to hold
- *	the data returned by the slave.  SMBus allows at most 32 bytes.
- *
- * This executes the SMBus "block read" protocol, returning negative errno
- * else the number of data bytes in the slave's response.
- *
- * Note that using this function requires that the client's adapter support
- * the I2C_FUNC_SMBUS_READ_BLOCK_DATA functionality.  Not all adapter drivers
- * support this; its emulation through I2C messaging relies on a specific
- * mechanism (I2C_M_RECV_LEN) which may not be implemented.
- */
-s32 i2c_smbus_read_block_data(const struct i2c_client *client, u8 command,
-			      u8 *values)
-{
-	union i2c_smbus_data data;
-	int status;
-
-	status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
-				I2C_SMBUS_READ, command,
-				I2C_SMBUS_BLOCK_DATA, &data);
-	if (status)
-		return status;
-
-	memcpy(values, &data.block[1], data.block[0]);
-	return data.block[0];
-}
-EXPORT_SYMBOL(i2c_smbus_read_block_data);
-
-/**
- * i2c_smbus_write_block_data - SMBus "block write" protocol
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- * @length: Size of data block; SMBus allows at most 32 bytes
- * @values: Byte array which will be written.
- *
- * This executes the SMBus "block write" protocol, returning negative errno
- * else zero on success.
- */
-s32 i2c_smbus_write_block_data(const struct i2c_client *client, u8 command,
-			       u8 length, const u8 *values)
-{
-	union i2c_smbus_data data;
-
-	if (length > I2C_SMBUS_BLOCK_MAX)
-		length = I2C_SMBUS_BLOCK_MAX;
-	data.block[0] = length;
-	memcpy(&data.block[1], values, length);
-	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
-			      I2C_SMBUS_WRITE, command,
-			      I2C_SMBUS_BLOCK_DATA, &data);
-}
-EXPORT_SYMBOL(i2c_smbus_write_block_data);
-
-/* Returns the number of read bytes */
-s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client, u8 command,
-				  u8 length, u8 *values)
-{
-	union i2c_smbus_data data;
-	int status;
-
-	if (length > I2C_SMBUS_BLOCK_MAX)
-		length = I2C_SMBUS_BLOCK_MAX;
-	data.block[0] = length;
-	status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
-				I2C_SMBUS_READ, command,
-				I2C_SMBUS_I2C_BLOCK_DATA, &data);
-	if (status < 0)
-		return status;
-
-	memcpy(values, &data.block[1], data.block[0]);
-	return data.block[0];
-}
-EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data);
-
-s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, u8 command,
-				   u8 length, const u8 *values)
-{
-	union i2c_smbus_data data;
-
-	if (length > I2C_SMBUS_BLOCK_MAX)
-		length = I2C_SMBUS_BLOCK_MAX;
-	data.block[0] = length;
-	memcpy(data.block + 1, values, length);
-	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
-			      I2C_SMBUS_WRITE, command,
-			      I2C_SMBUS_I2C_BLOCK_DATA, &data);
-}
-EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data);
-
-/* Simulate a SMBus command using the i2c protocol
-   No checking of parameters is done!  */
-static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr,
-				   unsigned short flags,
-				   char read_write, u8 command, int size,
-				   union i2c_smbus_data *data)
-{
-	/* So we need to generate a series of msgs. In the case of writing, we
-	  need to use only one message; when reading, we need two. We initialize
-	  most things with sane defaults, to keep the code below somewhat
-	  simpler. */
-	unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3];
-	unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2];
-	int num = read_write == I2C_SMBUS_READ ? 2 : 1;
-	int i;
-	u8 partial_pec = 0;
-	int status;
-	struct i2c_msg msg[2] = {
-		{
-			.addr = addr,
-			.flags = flags,
-			.len = 1,
-			.buf = msgbuf0,
-		}, {
-			.addr = addr,
-			.flags = flags | I2C_M_RD,
-			.len = 0,
-			.buf = msgbuf1,
-		},
-	};
-
-	msgbuf0[0] = command;
-	switch (size) {
-	case I2C_SMBUS_QUICK:
-		msg[0].len = 0;
-		/* Special case: The read/write field is used as data */
-		msg[0].flags = flags | (read_write == I2C_SMBUS_READ ?
-					I2C_M_RD : 0);
-		num = 1;
-		break;
-	case I2C_SMBUS_BYTE:
-		if (read_write == I2C_SMBUS_READ) {
-			/* Special case: only a read! */
-			msg[0].flags = I2C_M_RD | flags;
-			num = 1;
-		}
-		break;
-	case I2C_SMBUS_BYTE_DATA:
-		if (read_write == I2C_SMBUS_READ)
-			msg[1].len = 1;
-		else {
-			msg[0].len = 2;
-			msgbuf0[1] = data->byte;
-		}
-		break;
-	case I2C_SMBUS_WORD_DATA:
-		if (read_write == I2C_SMBUS_READ)
-			msg[1].len = 2;
-		else {
-			msg[0].len = 3;
-			msgbuf0[1] = data->word & 0xff;
-			msgbuf0[2] = data->word >> 8;
-		}
-		break;
-	case I2C_SMBUS_PROC_CALL:
-		num = 2; /* Special case */
-		read_write = I2C_SMBUS_READ;
-		msg[0].len = 3;
-		msg[1].len = 2;
-		msgbuf0[1] = data->word & 0xff;
-		msgbuf0[2] = data->word >> 8;
-		break;
-	case I2C_SMBUS_BLOCK_DATA:
-		if (read_write == I2C_SMBUS_READ) {
-			msg[1].flags |= I2C_M_RECV_LEN;
-			msg[1].len = 1; /* block length will be added by
-					   the underlying bus driver */
-		} else {
-			msg[0].len = data->block[0] + 2;
-			if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 2) {
-				dev_err(&adapter->dev,
-					"Invalid block write size %d\n",
-					data->block[0]);
-				return -EINVAL;
-			}
-			for (i = 1; i < msg[0].len; i++)
-				msgbuf0[i] = data->block[i-1];
-		}
-		break;
-	case I2C_SMBUS_BLOCK_PROC_CALL:
-		num = 2; /* Another special case */
-		read_write = I2C_SMBUS_READ;
-		if (data->block[0] > I2C_SMBUS_BLOCK_MAX) {
-			dev_err(&adapter->dev,
-				"Invalid block write size %d\n",
-				data->block[0]);
-			return -EINVAL;
-		}
-		msg[0].len = data->block[0] + 2;
-		for (i = 1; i < msg[0].len; i++)
-			msgbuf0[i] = data->block[i-1];
-		msg[1].flags |= I2C_M_RECV_LEN;
-		msg[1].len = 1; /* block length will be added by
-				   the underlying bus driver */
-		break;
-	case I2C_SMBUS_I2C_BLOCK_DATA:
-		if (read_write == I2C_SMBUS_READ) {
-			msg[1].len = data->block[0];
-		} else {
-			msg[0].len = data->block[0] + 1;
-			if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) {
-				dev_err(&adapter->dev,
-					"Invalid block write size %d\n",
-					data->block[0]);
-				return -EINVAL;
-			}
-			for (i = 1; i <= data->block[0]; i++)
-				msgbuf0[i] = data->block[i];
-		}
-		break;
-	default:
-		dev_err(&adapter->dev, "Unsupported transaction %d\n", size);
-		return -EOPNOTSUPP;
-	}
-
-	i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK
-				      && size != I2C_SMBUS_I2C_BLOCK_DATA);
-	if (i) {
-		/* Compute PEC if first message is a write */
-		if (!(msg[0].flags & I2C_M_RD)) {
-			if (num == 1) /* Write only */
-				i2c_smbus_add_pec(&msg[0]);
-			else /* Write followed by read */
-				partial_pec = i2c_smbus_msg_pec(0, &msg[0]);
-		}
-		/* Ask for PEC if last message is a read */
-		if (msg[num-1].flags & I2C_M_RD)
-			msg[num-1].len++;
-	}
-
-	status = i2c_transfer(adapter, msg, num);
-	if (status < 0)
-		return status;
-
-	/* Check PEC if last message is a read */
-	if (i && (msg[num-1].flags & I2C_M_RD)) {
-		status = i2c_smbus_check_pec(partial_pec, &msg[num-1]);
-		if (status < 0)
-			return status;
-	}
-
-	if (read_write == I2C_SMBUS_READ)
-		switch (size) {
-		case I2C_SMBUS_BYTE:
-			data->byte = msgbuf0[0];
-			break;
-		case I2C_SMBUS_BYTE_DATA:
-			data->byte = msgbuf1[0];
-			break;
-		case I2C_SMBUS_WORD_DATA:
-		case I2C_SMBUS_PROC_CALL:
-			data->word = msgbuf1[0] | (msgbuf1[1] << 8);
-			break;
-		case I2C_SMBUS_I2C_BLOCK_DATA:
-			for (i = 0; i < data->block[0]; i++)
-				data->block[i+1] = msgbuf1[i];
-			break;
-		case I2C_SMBUS_BLOCK_DATA:
-		case I2C_SMBUS_BLOCK_PROC_CALL:
-			for (i = 0; i < msgbuf1[0] + 1; i++)
-				data->block[i] = msgbuf1[i];
-			break;
-		}
-	return 0;
-}
-
-/**
- * i2c_smbus_xfer - execute SMBus protocol operations
- * @adapter: Handle to I2C bus
- * @addr: Address of SMBus slave on that bus
- * @flags: I2C_CLIENT_* flags (usually zero or I2C_CLIENT_PEC)
- * @read_write: I2C_SMBUS_READ or I2C_SMBUS_WRITE
- * @command: Byte interpreted by slave, for protocols which use such bytes
- * @protocol: SMBus protocol operation to execute, such as I2C_SMBUS_PROC_CALL
- * @data: Data to be read or written
- *
- * This executes an SMBus protocol operation, and returns a negative
- * errno code else zero on success.
- */
-s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
-		   char read_write, u8 command, int protocol,
-		   union i2c_smbus_data *data)
-{
-	unsigned long orig_jiffies;
-	int try;
-	s32 res;
-
-	/* If enabled, the following two tracepoints are conditional on
-	 * read_write and protocol.
-	 */
-	trace_smbus_write(adapter, addr, flags, read_write,
-			  command, protocol, data);
-	trace_smbus_read(adapter, addr, flags, read_write,
-			 command, protocol);
-
-	flags &= I2C_M_TEN | I2C_CLIENT_PEC | I2C_CLIENT_SCCB;
-
-	if (adapter->algo->smbus_xfer) {
-		i2c_lock_bus(adapter, I2C_LOCK_SEGMENT);
-
-		/* Retry automatically on arbitration loss */
-		orig_jiffies = jiffies;
-		for (res = 0, try = 0; try <= adapter->retries; try++) {
-			res = adapter->algo->smbus_xfer(adapter, addr, flags,
-							read_write, command,
-							protocol, data);
-			if (res != -EAGAIN)
-				break;
-			if (time_after(jiffies,
-				       orig_jiffies + adapter->timeout))
-				break;
-		}
-		i2c_unlock_bus(adapter, I2C_LOCK_SEGMENT);
-
-		if (res != -EOPNOTSUPP || !adapter->algo->master_xfer)
-			goto trace;
-		/*
-		 * Fall back to i2c_smbus_xfer_emulated if the adapter doesn't
-		 * implement native support for the SMBus operation.
-		 */
-	}
-
-	res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write,
-				      command, protocol, data);
-
-trace:
-	/* If enabled, the reply tracepoint is conditional on read_write. */
-	trace_smbus_reply(adapter, addr, flags, read_write,
-			  command, protocol, data);
-	trace_smbus_result(adapter, addr, flags, read_write,
-			   command, protocol, res);
-
-	return res;
-}
-EXPORT_SYMBOL(i2c_smbus_xfer);
-
-/**
- * i2c_smbus_read_i2c_block_data_or_emulated - read block or emulate
- * @client: Handle to slave device
- * @command: Byte interpreted by slave
- * @length: Size of data block; SMBus allows at most I2C_SMBUS_BLOCK_MAX bytes
- * @values: Byte array into which data will be read; big enough to hold
- *	the data returned by the slave.  SMBus allows at most
- *	I2C_SMBUS_BLOCK_MAX bytes.
- *
- * This executes the SMBus "block read" protocol if supported by the adapter.
- * If block read is not supported, it emulates it using either word or byte
- * read protocols depending on availability.
- *
- * The addresses of the I2C slave device that are accessed with this function
- * must be mapped to a linear region, so that a block read will have the same
- * effect as a byte read. Before using this function you must double-check
- * if the I2C slave does support exchanging a block transfer with a byte
- * transfer.
- */
-s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client,
-					      u8 command, u8 length, u8 *values)
-{
-	u8 i = 0;
-	int status;
-
-	if (length > I2C_SMBUS_BLOCK_MAX)
-		length = I2C_SMBUS_BLOCK_MAX;
-
-	if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK))
-		return i2c_smbus_read_i2c_block_data(client, command, length, values);
-
-	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA))
-		return -EOPNOTSUPP;
-
-	if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)) {
-		while ((i + 2) <= length) {
-			status = i2c_smbus_read_word_data(client, command + i);
-			if (status < 0)
-				return status;
-			values[i] = status & 0xff;
-			values[i + 1] = status >> 8;
-			i += 2;
-		}
-	}
-
-	while (i < length) {
-		status = i2c_smbus_read_byte_data(client, command + i);
-		if (status < 0)
-			return status;
-		values[i] = status;
-		i++;
-	}
-
-	return i;
-}
-EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated);
-
-#if IS_ENABLED(CONFIG_I2C_SLAVE)
-int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb)
-{
-	int ret;
-
-	if (!client || !slave_cb) {
-		WARN(1, "insufficient data\n");
-		return -EINVAL;
-	}
-
-	if (!(client->flags & I2C_CLIENT_SLAVE))
-		dev_warn(&client->dev, "%s: client slave flag not set. You might see address collisions\n",
-			 __func__);
-
-	if (!(client->flags & I2C_CLIENT_TEN)) {
-		/* Enforce stricter address checking */
-		ret = i2c_check_7bit_addr_validity_strict(client->addr);
-		if (ret) {
-			dev_err(&client->dev, "%s: invalid address\n", __func__);
-			return ret;
-		}
-	}
-
-	if (!client->adapter->algo->reg_slave) {
-		dev_err(&client->dev, "%s: not supported by adapter\n", __func__);
-		return -EOPNOTSUPP;
-	}
-
-	client->slave_cb = slave_cb;
-
-	i2c_lock_adapter(client->adapter);
-	ret = client->adapter->algo->reg_slave(client);
-	i2c_unlock_adapter(client->adapter);
-
-	if (ret) {
-		client->slave_cb = NULL;
-		dev_err(&client->dev, "%s: adapter returned error %d\n", __func__, ret);
-	}
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(i2c_slave_register);
-
-int i2c_slave_unregister(struct i2c_client *client)
-{
-	int ret;
-
-	if (!client->adapter->algo->unreg_slave) {
-		dev_err(&client->dev, "%s: not supported by adapter\n", __func__);
-		return -EOPNOTSUPP;
-	}
-
-	i2c_lock_adapter(client->adapter);
-	ret = client->adapter->algo->unreg_slave(client);
-	i2c_unlock_adapter(client->adapter);
-
-	if (ret == 0)
-		client->slave_cb = NULL;
-	else
-		dev_err(&client->dev, "%s: adapter returned error %d\n", __func__, ret);
-
-	return ret;
-}
-EXPORT_SYMBOL_GPL(i2c_slave_unregister);
-
-/**
- * i2c_detect_slave_mode - detect operation mode
- * @dev: The device owning the bus
- *
- * This checks the device nodes for an I2C slave by checking the address
- * used in the reg property. If the address match the I2C_OWN_SLAVE_ADDRESS
- * flag this means the device is configured to act as a I2C slave and it will
- * be listening at that address.
- *
- * Returns true if an I2C own slave address is detected, otherwise returns
- * false.
- */
-bool i2c_detect_slave_mode(struct device *dev)
-{
-	if (IS_BUILTIN(CONFIG_OF) && dev->of_node) {
-		struct device_node *child;
-		u32 reg;
-
-		for_each_child_of_node(dev->of_node, child) {
-			of_property_read_u32(child, "reg", &reg);
-			if (reg & I2C_OWN_SLAVE_ADDRESS) {
-				of_node_put(child);
-				return true;
-			}
-		}
-	} else if (IS_BUILTIN(CONFIG_ACPI) && ACPI_HANDLE(dev)) {
-		dev_dbg(dev, "ACPI slave is not supported yet\n");
-	}
-	return false;
-}
-EXPORT_SYMBOL_GPL(i2c_detect_slave_mode);
-
-#endif
-
 MODULE_AUTHOR("Simon G. Vogl <simon@tk.uni-linz.ac.at>");
 MODULE_DESCRIPTION("I2C-Bus main module");
 MODULE_LICENSE("GPL");
diff --git a/drivers/i2c/i2c-core-of.c b/drivers/i2c/i2c-core-of.c
new file mode 100644
index 000000000000..ccf82fdbcd8e
--- /dev/null
+++ b/drivers/i2c/i2c-core-of.c
@@ -0,0 +1,276 @@
+/*
+ * Linux I2C core OF support code
+ *
+ * Copyright (C) 2008 Jochen Friedrich <jochen@scram.de>
+ * based on a previous patch from Jon Smirl <jonsmirl@gmail.com>
+ *
+ * Copyright (C) 2013 Wolfram Sang <wsa@the-dreams.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <dt-bindings/i2c/i2c.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
+
+#include "i2c-core.h"
+
+static struct i2c_client *of_i2c_register_device(struct i2c_adapter *adap,
+						 struct device_node *node)
+{
+	struct i2c_client *result;
+	struct i2c_board_info info = {};
+	struct dev_archdata dev_ad = {};
+	const __be32 *addr_be;
+	u32 addr;
+	int len;
+
+	dev_dbg(&adap->dev, "of_i2c: register %s\n", node->full_name);
+
+	if (of_modalias_node(node, info.type, sizeof(info.type)) < 0) {
+		dev_err(&adap->dev, "of_i2c: modalias failure on %s\n",
+			node->full_name);
+		return ERR_PTR(-EINVAL);
+	}
+
+	addr_be = of_get_property(node, "reg", &len);
+	if (!addr_be || (len < sizeof(*addr_be))) {
+		dev_err(&adap->dev, "of_i2c: invalid reg on %s\n",
+			node->full_name);
+		return ERR_PTR(-EINVAL);
+	}
+
+	addr = be32_to_cpup(addr_be);
+	if (addr & I2C_TEN_BIT_ADDRESS) {
+		addr &= ~I2C_TEN_BIT_ADDRESS;
+		info.flags |= I2C_CLIENT_TEN;
+	}
+
+	if (addr & I2C_OWN_SLAVE_ADDRESS) {
+		addr &= ~I2C_OWN_SLAVE_ADDRESS;
+		info.flags |= I2C_CLIENT_SLAVE;
+	}
+
+	if (i2c_check_addr_validity(addr, info.flags)) {
+		dev_err(&adap->dev, "of_i2c: invalid addr=%x on %s\n",
+			addr, node->full_name);
+		return ERR_PTR(-EINVAL);
+	}
+
+	info.addr = addr;
+	info.of_node = of_node_get(node);
+	info.archdata = &dev_ad;
+
+	if (of_property_read_bool(node, "host-notify"))
+		info.flags |= I2C_CLIENT_HOST_NOTIFY;
+
+	if (of_get_property(node, "wakeup-source", NULL))
+		info.flags |= I2C_CLIENT_WAKE;
+
+	result = i2c_new_device(adap, &info);
+	if (result == NULL) {
+		dev_err(&adap->dev, "of_i2c: Failure registering %s\n",
+			node->full_name);
+		of_node_put(node);
+		return ERR_PTR(-EINVAL);
+	}
+	return result;
+}
+
+void of_i2c_register_devices(struct i2c_adapter *adap)
+{
+	struct device_node *bus, *node;
+	struct i2c_client *client;
+
+	/* Only register child devices if the adapter has a node pointer set */
+	if (!adap->dev.of_node)
+		return;
+
+	dev_dbg(&adap->dev, "of_i2c: walking child nodes\n");
+
+	bus = of_get_child_by_name(adap->dev.of_node, "i2c-bus");
+	if (!bus)
+		bus = of_node_get(adap->dev.of_node);
+
+	for_each_available_child_of_node(bus, node) {
+		if (of_node_test_and_set_flag(node, OF_POPULATED))
+			continue;
+
+		client = of_i2c_register_device(adap, node);
+		if (IS_ERR(client)) {
+			dev_warn(&adap->dev,
+				 "Failed to create I2C device for %s\n",
+				 node->full_name);
+			of_node_clear_flag(node, OF_POPULATED);
+		}
+	}
+
+	of_node_put(bus);
+}
+
+static int of_dev_node_match(struct device *dev, void *data)
+{
+	return dev->of_node == data;
+}
+
+/* must call put_device() when done with returned i2c_client device */
+struct i2c_client *of_find_i2c_device_by_node(struct device_node *node)
+{
+	struct device *dev;
+	struct i2c_client *client;
+
+	dev = bus_find_device(&i2c_bus_type, NULL, node, of_dev_node_match);
+	if (!dev)
+		return NULL;
+
+	client = i2c_verify_client(dev);
+	if (!client)
+		put_device(dev);
+
+	return client;
+}
+EXPORT_SYMBOL(of_find_i2c_device_by_node);
+
+/* must call put_device() when done with returned i2c_adapter device */
+struct i2c_adapter *of_find_i2c_adapter_by_node(struct device_node *node)
+{
+	struct device *dev;
+	struct i2c_adapter *adapter;
+
+	dev = bus_find_device(&i2c_bus_type, NULL, node, of_dev_node_match);
+	if (!dev)
+		return NULL;
+
+	adapter = i2c_verify_adapter(dev);
+	if (!adapter)
+		put_device(dev);
+
+	return adapter;
+}
+EXPORT_SYMBOL(of_find_i2c_adapter_by_node);
+
+/* must call i2c_put_adapter() when done with returned i2c_adapter device */
+struct i2c_adapter *of_get_i2c_adapter_by_node(struct device_node *node)
+{
+	struct i2c_adapter *adapter;
+
+	adapter = of_find_i2c_adapter_by_node(node);
+	if (!adapter)
+		return NULL;
+
+	if (!try_module_get(adapter->owner)) {
+		put_device(&adapter->dev);
+		adapter = NULL;
+	}
+
+	return adapter;
+}
+EXPORT_SYMBOL(of_get_i2c_adapter_by_node);
+
+static const struct of_device_id*
+i2c_of_match_device_sysfs(const struct of_device_id *matches,
+				  struct i2c_client *client)
+{
+	const char *name;
+
+	for (; matches->compatible[0]; matches++) {
+		/*
+		 * Adding devices through the i2c sysfs interface provides us
+		 * a string to match which may be compatible with the device
+		 * tree compatible strings, however with no actual of_node the
+		 * of_match_device() will not match
+		 */
+		if (sysfs_streq(client->name, matches->compatible))
+			return matches;
+
+		name = strchr(matches->compatible, ',');
+		if (!name)
+			name = matches->compatible;
+		else
+			name++;
+
+		if (sysfs_streq(client->name, name))
+			return matches;
+	}
+
+	return NULL;
+}
+
+const struct of_device_id
+*i2c_of_match_device(const struct of_device_id *matches,
+		     struct i2c_client *client)
+{
+	const struct of_device_id *match;
+
+	if (!(client && matches))
+		return NULL;
+
+	match = of_match_device(matches, &client->dev);
+	if (match)
+		return match;
+
+	return i2c_of_match_device_sysfs(matches, client);
+}
+EXPORT_SYMBOL_GPL(i2c_of_match_device);
+
+#if IS_ENABLED(CONFIG_OF_DYNAMIC)
+static int of_i2c_notify(struct notifier_block *nb, unsigned long action,
+			 void *arg)
+{
+	struct of_reconfig_data *rd = arg;
+	struct i2c_adapter *adap;
+	struct i2c_client *client;
+
+	switch (of_reconfig_get_state_change(action, rd)) {
+	case OF_RECONFIG_CHANGE_ADD:
+		adap = of_find_i2c_adapter_by_node(rd->dn->parent);
+		if (adap == NULL)
+			return NOTIFY_OK;	/* not for us */
+
+		if (of_node_test_and_set_flag(rd->dn, OF_POPULATED)) {
+			put_device(&adap->dev);
+			return NOTIFY_OK;
+		}
+
+		client = of_i2c_register_device(adap, rd->dn);
+		put_device(&adap->dev);
+
+		if (IS_ERR(client)) {
+			dev_err(&adap->dev, "failed to create client for '%s'\n",
+				 rd->dn->full_name);
+			of_node_clear_flag(rd->dn, OF_POPULATED);
+			return notifier_from_errno(PTR_ERR(client));
+		}
+		break;
+	case OF_RECONFIG_CHANGE_REMOVE:
+		/* already depopulated? */
+		if (!of_node_check_flag(rd->dn, OF_POPULATED))
+			return NOTIFY_OK;
+
+		/* find our device by node */
+		client = of_find_i2c_device_by_node(rd->dn);
+		if (client == NULL)
+			return NOTIFY_OK;	/* no? not meant for us */
+
+		/* unregister takes one ref away */
+		i2c_unregister_device(client);
+
+		/* and put the reference of the find */
+		put_device(&client->dev);
+		break;
+	}
+
+	return NOTIFY_OK;
+}
+
+struct notifier_block i2c_of_notifier = {
+	.notifier_call = of_i2c_notify,
+};
+#endif /* CONFIG_OF_DYNAMIC */
diff --git a/drivers/i2c/i2c-core-slave.c b/drivers/i2c/i2c-core-slave.c
new file mode 100644
index 000000000000..4a78c65e9971
--- /dev/null
+++ b/drivers/i2c/i2c-core-slave.c
@@ -0,0 +1,115 @@
+/*
+ * Linux I2C core slave support code
+ *
+ * Copyright (C) 2014 by Wolfram Sang <wsa@sang-engineering.com>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+
+#include <dt-bindings/i2c/i2c.h>
+#include <linux/acpi.h>
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/of.h>
+
+#include "i2c-core.h"
+
+int i2c_slave_register(struct i2c_client *client, i2c_slave_cb_t slave_cb)
+{
+	int ret;
+
+	if (!client || !slave_cb) {
+		WARN(1, "insufficient data\n");
+		return -EINVAL;
+	}
+
+	if (!(client->flags & I2C_CLIENT_SLAVE))
+		dev_warn(&client->dev, "%s: client slave flag not set. You might see address collisions\n",
+			 __func__);
+
+	if (!(client->flags & I2C_CLIENT_TEN)) {
+		/* Enforce stricter address checking */
+		ret = i2c_check_7bit_addr_validity_strict(client->addr);
+		if (ret) {
+			dev_err(&client->dev, "%s: invalid address\n", __func__);
+			return ret;
+		}
+	}
+
+	if (!client->adapter->algo->reg_slave) {
+		dev_err(&client->dev, "%s: not supported by adapter\n", __func__);
+		return -EOPNOTSUPP;
+	}
+
+	client->slave_cb = slave_cb;
+
+	i2c_lock_adapter(client->adapter);
+	ret = client->adapter->algo->reg_slave(client);
+	i2c_unlock_adapter(client->adapter);
+
+	if (ret) {
+		client->slave_cb = NULL;
+		dev_err(&client->dev, "%s: adapter returned error %d\n", __func__, ret);
+	}
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_slave_register);
+
+int i2c_slave_unregister(struct i2c_client *client)
+{
+	int ret;
+
+	if (!client->adapter->algo->unreg_slave) {
+		dev_err(&client->dev, "%s: not supported by adapter\n", __func__);
+		return -EOPNOTSUPP;
+	}
+
+	i2c_lock_adapter(client->adapter);
+	ret = client->adapter->algo->unreg_slave(client);
+	i2c_unlock_adapter(client->adapter);
+
+	if (ret == 0)
+		client->slave_cb = NULL;
+	else
+		dev_err(&client->dev, "%s: adapter returned error %d\n", __func__, ret);
+
+	return ret;
+}
+EXPORT_SYMBOL_GPL(i2c_slave_unregister);
+
+/**
+ * i2c_detect_slave_mode - detect operation mode
+ * @dev: The device owning the bus
+ *
+ * This checks the device nodes for an I2C slave by checking the address
+ * used in the reg property. If the address match the I2C_OWN_SLAVE_ADDRESS
+ * flag this means the device is configured to act as a I2C slave and it will
+ * be listening at that address.
+ *
+ * Returns true if an I2C own slave address is detected, otherwise returns
+ * false.
+ */
+bool i2c_detect_slave_mode(struct device *dev)
+{
+	if (IS_BUILTIN(CONFIG_OF) && dev->of_node) {
+		struct device_node *child;
+		u32 reg;
+
+		for_each_child_of_node(dev->of_node, child) {
+			of_property_read_u32(child, "reg", &reg);
+			if (reg & I2C_OWN_SLAVE_ADDRESS) {
+				of_node_put(child);
+				return true;
+			}
+		}
+	} else if (IS_BUILTIN(CONFIG_ACPI) && ACPI_HANDLE(dev)) {
+		dev_dbg(dev, "ACPI slave is not supported yet\n");
+	}
+	return false;
+}
+EXPORT_SYMBOL_GPL(i2c_detect_slave_mode);
diff --git a/drivers/i2c/i2c-core-smbus.c b/drivers/i2c/i2c-core-smbus.c
new file mode 100644
index 000000000000..10f00a82ec9d
--- /dev/null
+++ b/drivers/i2c/i2c-core-smbus.c
@@ -0,0 +1,594 @@
+/*
+ * Linux I2C core SMBus and SMBus emulation code
+ *
+ * This file contains the SMBus functions which are always included in the I2C
+ * core because they can be emulated via I2C. SMBus specific extensions
+ * (e.g. smbalert) are handled in a seperate i2c-smbus module.
+ *
+ * All SMBus-related things are written by Frodo Looijaard <frodol@dds.nl>
+ * SMBus 2.0 support by Mark Studebaker <mdsxyz123@yahoo.com> and
+ * Jean Delvare <jdelvare@suse.de>
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the Free
+ * Software Foundation; either version 2 of the License, or (at your option)
+ * any later version.
+ */
+#include <linux/device.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+
+#define CREATE_TRACE_POINTS
+#include <trace/events/smbus.h>
+
+
+/* The SMBus parts */
+
+#define POLY    (0x1070U << 3)
+static u8 crc8(u16 data)
+{
+	int i;
+
+	for (i = 0; i < 8; i++) {
+		if (data & 0x8000)
+			data = data ^ POLY;
+		data = data << 1;
+	}
+	return (u8)(data >> 8);
+}
+
+/* Incremental CRC8 over count bytes in the array pointed to by p */
+static u8 i2c_smbus_pec(u8 crc, u8 *p, size_t count)
+{
+	int i;
+
+	for (i = 0; i < count; i++)
+		crc = crc8((crc ^ p[i]) << 8);
+	return crc;
+}
+
+/* Assume a 7-bit address, which is reasonable for SMBus */
+static u8 i2c_smbus_msg_pec(u8 pec, struct i2c_msg *msg)
+{
+	/* The address will be sent first */
+	u8 addr = i2c_8bit_addr_from_msg(msg);
+	pec = i2c_smbus_pec(pec, &addr, 1);
+
+	/* The data buffer follows */
+	return i2c_smbus_pec(pec, msg->buf, msg->len);
+}
+
+/* Used for write only transactions */
+static inline void i2c_smbus_add_pec(struct i2c_msg *msg)
+{
+	msg->buf[msg->len] = i2c_smbus_msg_pec(0, msg);
+	msg->len++;
+}
+
+/* Return <0 on CRC error
+   If there was a write before this read (most cases) we need to take the
+   partial CRC from the write part into account.
+   Note that this function does modify the message (we need to decrease the
+   message length to hide the CRC byte from the caller). */
+static int i2c_smbus_check_pec(u8 cpec, struct i2c_msg *msg)
+{
+	u8 rpec = msg->buf[--msg->len];
+	cpec = i2c_smbus_msg_pec(cpec, msg);
+
+	if (rpec != cpec) {
+		pr_debug("Bad PEC 0x%02x vs. 0x%02x\n",
+			rpec, cpec);
+		return -EBADMSG;
+	}
+	return 0;
+}
+
+/**
+ * i2c_smbus_read_byte - SMBus "receive byte" protocol
+ * @client: Handle to slave device
+ *
+ * This executes the SMBus "receive byte" protocol, returning negative errno
+ * else the byte received from the device.
+ */
+s32 i2c_smbus_read_byte(const struct i2c_client *client)
+{
+	union i2c_smbus_data data;
+	int status;
+
+	status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+				I2C_SMBUS_READ, 0,
+				I2C_SMBUS_BYTE, &data);
+	return (status < 0) ? status : data.byte;
+}
+EXPORT_SYMBOL(i2c_smbus_read_byte);
+
+/**
+ * i2c_smbus_write_byte - SMBus "send byte" protocol
+ * @client: Handle to slave device
+ * @value: Byte to be sent
+ *
+ * This executes the SMBus "send byte" protocol, returning negative errno
+ * else zero on success.
+ */
+s32 i2c_smbus_write_byte(const struct i2c_client *client, u8 value)
+{
+	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+	                      I2C_SMBUS_WRITE, value, I2C_SMBUS_BYTE, NULL);
+}
+EXPORT_SYMBOL(i2c_smbus_write_byte);
+
+/**
+ * i2c_smbus_read_byte_data - SMBus "read byte" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ *
+ * This executes the SMBus "read byte" protocol, returning negative errno
+ * else a data byte received from the device.
+ */
+s32 i2c_smbus_read_byte_data(const struct i2c_client *client, u8 command)
+{
+	union i2c_smbus_data data;
+	int status;
+
+	status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+				I2C_SMBUS_READ, command,
+				I2C_SMBUS_BYTE_DATA, &data);
+	return (status < 0) ? status : data.byte;
+}
+EXPORT_SYMBOL(i2c_smbus_read_byte_data);
+
+/**
+ * i2c_smbus_write_byte_data - SMBus "write byte" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @value: Byte being written
+ *
+ * This executes the SMBus "write byte" protocol, returning negative errno
+ * else zero on success.
+ */
+s32 i2c_smbus_write_byte_data(const struct i2c_client *client, u8 command,
+			      u8 value)
+{
+	union i2c_smbus_data data;
+	data.byte = value;
+	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			      I2C_SMBUS_WRITE, command,
+			      I2C_SMBUS_BYTE_DATA, &data);
+}
+EXPORT_SYMBOL(i2c_smbus_write_byte_data);
+
+/**
+ * i2c_smbus_read_word_data - SMBus "read word" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ *
+ * This executes the SMBus "read word" protocol, returning negative errno
+ * else a 16-bit unsigned "word" received from the device.
+ */
+s32 i2c_smbus_read_word_data(const struct i2c_client *client, u8 command)
+{
+	union i2c_smbus_data data;
+	int status;
+
+	status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+				I2C_SMBUS_READ, command,
+				I2C_SMBUS_WORD_DATA, &data);
+	return (status < 0) ? status : data.word;
+}
+EXPORT_SYMBOL(i2c_smbus_read_word_data);
+
+/**
+ * i2c_smbus_write_word_data - SMBus "write word" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @value: 16-bit "word" being written
+ *
+ * This executes the SMBus "write word" protocol, returning negative errno
+ * else zero on success.
+ */
+s32 i2c_smbus_write_word_data(const struct i2c_client *client, u8 command,
+			      u16 value)
+{
+	union i2c_smbus_data data;
+	data.word = value;
+	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			      I2C_SMBUS_WRITE, command,
+			      I2C_SMBUS_WORD_DATA, &data);
+}
+EXPORT_SYMBOL(i2c_smbus_write_word_data);
+
+/**
+ * i2c_smbus_read_block_data - SMBus "block read" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @values: Byte array into which data will be read; big enough to hold
+ *	the data returned by the slave.  SMBus allows at most 32 bytes.
+ *
+ * This executes the SMBus "block read" protocol, returning negative errno
+ * else the number of data bytes in the slave's response.
+ *
+ * Note that using this function requires that the client's adapter support
+ * the I2C_FUNC_SMBUS_READ_BLOCK_DATA functionality.  Not all adapter drivers
+ * support this; its emulation through I2C messaging relies on a specific
+ * mechanism (I2C_M_RECV_LEN) which may not be implemented.
+ */
+s32 i2c_smbus_read_block_data(const struct i2c_client *client, u8 command,
+			      u8 *values)
+{
+	union i2c_smbus_data data;
+	int status;
+
+	status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+				I2C_SMBUS_READ, command,
+				I2C_SMBUS_BLOCK_DATA, &data);
+	if (status)
+		return status;
+
+	memcpy(values, &data.block[1], data.block[0]);
+	return data.block[0];
+}
+EXPORT_SYMBOL(i2c_smbus_read_block_data);
+
+/**
+ * i2c_smbus_write_block_data - SMBus "block write" protocol
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @length: Size of data block; SMBus allows at most 32 bytes
+ * @values: Byte array which will be written.
+ *
+ * This executes the SMBus "block write" protocol, returning negative errno
+ * else zero on success.
+ */
+s32 i2c_smbus_write_block_data(const struct i2c_client *client, u8 command,
+			       u8 length, const u8 *values)
+{
+	union i2c_smbus_data data;
+
+	if (length > I2C_SMBUS_BLOCK_MAX)
+		length = I2C_SMBUS_BLOCK_MAX;
+	data.block[0] = length;
+	memcpy(&data.block[1], values, length);
+	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			      I2C_SMBUS_WRITE, command,
+			      I2C_SMBUS_BLOCK_DATA, &data);
+}
+EXPORT_SYMBOL(i2c_smbus_write_block_data);
+
+/* Returns the number of read bytes */
+s32 i2c_smbus_read_i2c_block_data(const struct i2c_client *client, u8 command,
+				  u8 length, u8 *values)
+{
+	union i2c_smbus_data data;
+	int status;
+
+	if (length > I2C_SMBUS_BLOCK_MAX)
+		length = I2C_SMBUS_BLOCK_MAX;
+	data.block[0] = length;
+	status = i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+				I2C_SMBUS_READ, command,
+				I2C_SMBUS_I2C_BLOCK_DATA, &data);
+	if (status < 0)
+		return status;
+
+	memcpy(values, &data.block[1], data.block[0]);
+	return data.block[0];
+}
+EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data);
+
+s32 i2c_smbus_write_i2c_block_data(const struct i2c_client *client, u8 command,
+				   u8 length, const u8 *values)
+{
+	union i2c_smbus_data data;
+
+	if (length > I2C_SMBUS_BLOCK_MAX)
+		length = I2C_SMBUS_BLOCK_MAX;
+	data.block[0] = length;
+	memcpy(data.block + 1, values, length);
+	return i2c_smbus_xfer(client->adapter, client->addr, client->flags,
+			      I2C_SMBUS_WRITE, command,
+			      I2C_SMBUS_I2C_BLOCK_DATA, &data);
+}
+EXPORT_SYMBOL(i2c_smbus_write_i2c_block_data);
+
+/* Simulate a SMBus command using the i2c protocol
+   No checking of parameters is done!  */
+static s32 i2c_smbus_xfer_emulated(struct i2c_adapter *adapter, u16 addr,
+				   unsigned short flags,
+				   char read_write, u8 command, int size,
+				   union i2c_smbus_data *data)
+{
+	/* So we need to generate a series of msgs. In the case of writing, we
+	  need to use only one message; when reading, we need two. We initialize
+	  most things with sane defaults, to keep the code below somewhat
+	  simpler. */
+	unsigned char msgbuf0[I2C_SMBUS_BLOCK_MAX+3];
+	unsigned char msgbuf1[I2C_SMBUS_BLOCK_MAX+2];
+	int num = read_write == I2C_SMBUS_READ ? 2 : 1;
+	int i;
+	u8 partial_pec = 0;
+	int status;
+	struct i2c_msg msg[2] = {
+		{
+			.addr = addr,
+			.flags = flags,
+			.len = 1,
+			.buf = msgbuf0,
+		}, {
+			.addr = addr,
+			.flags = flags | I2C_M_RD,
+			.len = 0,
+			.buf = msgbuf1,
+		},
+	};
+
+	msgbuf0[0] = command;
+	switch (size) {
+	case I2C_SMBUS_QUICK:
+		msg[0].len = 0;
+		/* Special case: The read/write field is used as data */
+		msg[0].flags = flags | (read_write == I2C_SMBUS_READ ?
+					I2C_M_RD : 0);
+		num = 1;
+		break;
+	case I2C_SMBUS_BYTE:
+		if (read_write == I2C_SMBUS_READ) {
+			/* Special case: only a read! */
+			msg[0].flags = I2C_M_RD | flags;
+			num = 1;
+		}
+		break;
+	case I2C_SMBUS_BYTE_DATA:
+		if (read_write == I2C_SMBUS_READ)
+			msg[1].len = 1;
+		else {
+			msg[0].len = 2;
+			msgbuf0[1] = data->byte;
+		}
+		break;
+	case I2C_SMBUS_WORD_DATA:
+		if (read_write == I2C_SMBUS_READ)
+			msg[1].len = 2;
+		else {
+			msg[0].len = 3;
+			msgbuf0[1] = data->word & 0xff;
+			msgbuf0[2] = data->word >> 8;
+		}
+		break;
+	case I2C_SMBUS_PROC_CALL:
+		num = 2; /* Special case */
+		read_write = I2C_SMBUS_READ;
+		msg[0].len = 3;
+		msg[1].len = 2;
+		msgbuf0[1] = data->word & 0xff;
+		msgbuf0[2] = data->word >> 8;
+		break;
+	case I2C_SMBUS_BLOCK_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			msg[1].flags |= I2C_M_RECV_LEN;
+			msg[1].len = 1; /* block length will be added by
+					   the underlying bus driver */
+		} else {
+			msg[0].len = data->block[0] + 2;
+			if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 2) {
+				dev_err(&adapter->dev,
+					"Invalid block write size %d\n",
+					data->block[0]);
+				return -EINVAL;
+			}
+			for (i = 1; i < msg[0].len; i++)
+				msgbuf0[i] = data->block[i-1];
+		}
+		break;
+	case I2C_SMBUS_BLOCK_PROC_CALL:
+		num = 2; /* Another special case */
+		read_write = I2C_SMBUS_READ;
+		if (data->block[0] > I2C_SMBUS_BLOCK_MAX) {
+			dev_err(&adapter->dev,
+				"Invalid block write size %d\n",
+				data->block[0]);
+			return -EINVAL;
+		}
+		msg[0].len = data->block[0] + 2;
+		for (i = 1; i < msg[0].len; i++)
+			msgbuf0[i] = data->block[i-1];
+		msg[1].flags |= I2C_M_RECV_LEN;
+		msg[1].len = 1; /* block length will be added by
+				   the underlying bus driver */
+		break;
+	case I2C_SMBUS_I2C_BLOCK_DATA:
+		if (read_write == I2C_SMBUS_READ) {
+			msg[1].len = data->block[0];
+		} else {
+			msg[0].len = data->block[0] + 1;
+			if (msg[0].len > I2C_SMBUS_BLOCK_MAX + 1) {
+				dev_err(&adapter->dev,
+					"Invalid block write size %d\n",
+					data->block[0]);
+				return -EINVAL;
+			}
+			for (i = 1; i <= data->block[0]; i++)
+				msgbuf0[i] = data->block[i];
+		}
+		break;
+	default:
+		dev_err(&adapter->dev, "Unsupported transaction %d\n", size);
+		return -EOPNOTSUPP;
+	}
+
+	i = ((flags & I2C_CLIENT_PEC) && size != I2C_SMBUS_QUICK
+				      && size != I2C_SMBUS_I2C_BLOCK_DATA);
+	if (i) {
+		/* Compute PEC if first message is a write */
+		if (!(msg[0].flags & I2C_M_RD)) {
+			if (num == 1) /* Write only */
+				i2c_smbus_add_pec(&msg[0]);
+			else /* Write followed by read */
+				partial_pec = i2c_smbus_msg_pec(0, &msg[0]);
+		}
+		/* Ask for PEC if last message is a read */
+		if (msg[num-1].flags & I2C_M_RD)
+			msg[num-1].len++;
+	}
+
+	status = i2c_transfer(adapter, msg, num);
+	if (status < 0)
+		return status;
+
+	/* Check PEC if last message is a read */
+	if (i && (msg[num-1].flags & I2C_M_RD)) {
+		status = i2c_smbus_check_pec(partial_pec, &msg[num-1]);
+		if (status < 0)
+			return status;
+	}
+
+	if (read_write == I2C_SMBUS_READ)
+		switch (size) {
+		case I2C_SMBUS_BYTE:
+			data->byte = msgbuf0[0];
+			break;
+		case I2C_SMBUS_BYTE_DATA:
+			data->byte = msgbuf1[0];
+			break;
+		case I2C_SMBUS_WORD_DATA:
+		case I2C_SMBUS_PROC_CALL:
+			data->word = msgbuf1[0] | (msgbuf1[1] << 8);
+			break;
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			for (i = 0; i < data->block[0]; i++)
+				data->block[i+1] = msgbuf1[i];
+			break;
+		case I2C_SMBUS_BLOCK_DATA:
+		case I2C_SMBUS_BLOCK_PROC_CALL:
+			for (i = 0; i < msgbuf1[0] + 1; i++)
+				data->block[i] = msgbuf1[i];
+			break;
+		}
+	return 0;
+}
+
+/**
+ * i2c_smbus_xfer - execute SMBus protocol operations
+ * @adapter: Handle to I2C bus
+ * @addr: Address of SMBus slave on that bus
+ * @flags: I2C_CLIENT_* flags (usually zero or I2C_CLIENT_PEC)
+ * @read_write: I2C_SMBUS_READ or I2C_SMBUS_WRITE
+ * @command: Byte interpreted by slave, for protocols which use such bytes
+ * @protocol: SMBus protocol operation to execute, such as I2C_SMBUS_PROC_CALL
+ * @data: Data to be read or written
+ *
+ * This executes an SMBus protocol operation, and returns a negative
+ * errno code else zero on success.
+ */
+s32 i2c_smbus_xfer(struct i2c_adapter *adapter, u16 addr, unsigned short flags,
+		   char read_write, u8 command, int protocol,
+		   union i2c_smbus_data *data)
+{
+	unsigned long orig_jiffies;
+	int try;
+	s32 res;
+
+	/* If enabled, the following two tracepoints are conditional on
+	 * read_write and protocol.
+	 */
+	trace_smbus_write(adapter, addr, flags, read_write,
+			  command, protocol, data);
+	trace_smbus_read(adapter, addr, flags, read_write,
+			 command, protocol);
+
+	flags &= I2C_M_TEN | I2C_CLIENT_PEC | I2C_CLIENT_SCCB;
+
+	if (adapter->algo->smbus_xfer) {
+		i2c_lock_bus(adapter, I2C_LOCK_SEGMENT);
+
+		/* Retry automatically on arbitration loss */
+		orig_jiffies = jiffies;
+		for (res = 0, try = 0; try <= adapter->retries; try++) {
+			res = adapter->algo->smbus_xfer(adapter, addr, flags,
+							read_write, command,
+							protocol, data);
+			if (res != -EAGAIN)
+				break;
+			if (time_after(jiffies,
+				       orig_jiffies + adapter->timeout))
+				break;
+		}
+		i2c_unlock_bus(adapter, I2C_LOCK_SEGMENT);
+
+		if (res != -EOPNOTSUPP || !adapter->algo->master_xfer)
+			goto trace;
+		/*
+		 * Fall back to i2c_smbus_xfer_emulated if the adapter doesn't
+		 * implement native support for the SMBus operation.
+		 */
+	}
+
+	res = i2c_smbus_xfer_emulated(adapter, addr, flags, read_write,
+				      command, protocol, data);
+
+trace:
+	/* If enabled, the reply tracepoint is conditional on read_write. */
+	trace_smbus_reply(adapter, addr, flags, read_write,
+			  command, protocol, data);
+	trace_smbus_result(adapter, addr, flags, read_write,
+			   command, protocol, res);
+
+	return res;
+}
+EXPORT_SYMBOL(i2c_smbus_xfer);
+
+/**
+ * i2c_smbus_read_i2c_block_data_or_emulated - read block or emulate
+ * @client: Handle to slave device
+ * @command: Byte interpreted by slave
+ * @length: Size of data block; SMBus allows at most I2C_SMBUS_BLOCK_MAX bytes
+ * @values: Byte array into which data will be read; big enough to hold
+ *	the data returned by the slave.  SMBus allows at most
+ *	I2C_SMBUS_BLOCK_MAX bytes.
+ *
+ * This executes the SMBus "block read" protocol if supported by the adapter.
+ * If block read is not supported, it emulates it using either word or byte
+ * read protocols depending on availability.
+ *
+ * The addresses of the I2C slave device that are accessed with this function
+ * must be mapped to a linear region, so that a block read will have the same
+ * effect as a byte read. Before using this function you must double-check
+ * if the I2C slave does support exchanging a block transfer with a byte
+ * transfer.
+ */
+s32 i2c_smbus_read_i2c_block_data_or_emulated(const struct i2c_client *client,
+					      u8 command, u8 length, u8 *values)
+{
+	u8 i = 0;
+	int status;
+
+	if (length > I2C_SMBUS_BLOCK_MAX)
+		length = I2C_SMBUS_BLOCK_MAX;
+
+	if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_I2C_BLOCK))
+		return i2c_smbus_read_i2c_block_data(client, command, length, values);
+
+	if (!i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA))
+		return -EOPNOTSUPP;
+
+	if (i2c_check_functionality(client->adapter, I2C_FUNC_SMBUS_READ_WORD_DATA)) {
+		while ((i + 2) <= length) {
+			status = i2c_smbus_read_word_data(client, command + i);
+			if (status < 0)
+				return status;
+			values[i] = status & 0xff;
+			values[i + 1] = status >> 8;
+			i += 2;
+		}
+	}
+
+	while (i < length) {
+		status = i2c_smbus_read_byte_data(client, command + i);
+		if (status < 0)
+			return status;
+		values[i] = status;
+		i++;
+	}
+
+	return i;
+}
+EXPORT_SYMBOL(i2c_smbus_read_i2c_block_data_or_emulated);
diff --git a/drivers/i2c/i2c-core.h b/drivers/i2c/i2c-core.h
index 17700bfddcf5..3b63f5e5b89c 100644
--- a/drivers/i2c/i2c-core.h
+++ b/drivers/i2c/i2c-core.h
@@ -27,3 +27,27 @@ extern struct rw_semaphore	__i2c_board_lock;
 extern struct list_head	__i2c_board_list;
 extern int		__i2c_first_dynamic_bus_num;
 
+int i2c_check_addr_validity(unsigned addr, unsigned short flags);
+int i2c_check_7bit_addr_validity_strict(unsigned short addr);
+
+#ifdef CONFIG_ACPI
+void i2c_acpi_register_devices(struct i2c_adapter *adap);
+#else /* CONFIG_ACPI */
+static inline void i2c_acpi_register_devices(struct i2c_adapter *adap) { }
+#endif /* CONFIG_ACPI */
+extern struct notifier_block i2c_acpi_notifier;
+
+#ifdef CONFIG_ACPI_I2C_OPREGION
+int i2c_acpi_install_space_handler(struct i2c_adapter *adapter);
+void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter);
+#else /* CONFIG_ACPI_I2C_OPREGION */
+static inline int i2c_acpi_install_space_handler(struct i2c_adapter *adapter) { return 0; }
+static inline void i2c_acpi_remove_space_handler(struct i2c_adapter *adapter) { }
+#endif /* CONFIG_ACPI_I2C_OPREGION */
+
+#ifdef CONFIG_OF
+void of_i2c_register_devices(struct i2c_adapter *adap);
+#else
+static inline void of_i2c_register_devices(struct i2c_adapter *adap) { }
+#endif
+extern struct notifier_block i2c_of_notifier;
diff --git a/drivers/i2c/i2c-stub.c b/drivers/i2c/i2c-stub.c
index 06af583d5101..4a9ad91c5ba3 100644
--- a/drivers/i2c/i2c-stub.c
+++ b/drivers/i2c/i2c-stub.c
@@ -16,6 +16,7 @@
 */
 
 #define DEBUG 1
+#define pr_fmt(fmt) "i2c-stub: " fmt
 
 #include <linux/errno.h>
 #include <linux/i2c.h>
@@ -342,7 +343,7 @@ static int __init i2c_stub_allocate_banks(int i)
 	if (!chip->bank_words)
 		return -ENOMEM;
 
-	pr_debug("i2c-stub: Allocated %u banks of %u words each (registers 0x%02x to 0x%02x)\n",
+	pr_debug("Allocated %u banks of %u words each (registers 0x%02x to 0x%02x)\n",
 		 chip->bank_mask, chip->bank_size, chip->bank_start,
 		 chip->bank_end);
 
@@ -363,28 +364,27 @@ static int __init i2c_stub_init(void)
 	int i, ret;
 
 	if (!chip_addr[0]) {
-		pr_err("i2c-stub: Please specify a chip address\n");
+		pr_err("Please specify a chip address\n");
 		return -ENODEV;
 	}
 
 	for (i = 0; i < MAX_CHIPS && chip_addr[i]; i++) {
 		if (chip_addr[i] < 0x03 || chip_addr[i] > 0x77) {
-			pr_err("i2c-stub: Invalid chip address 0x%02x\n",
+			pr_err("Invalid chip address 0x%02x\n",
 			       chip_addr[i]);
 			return -EINVAL;
 		}
 
-		pr_info("i2c-stub: Virtual chip at 0x%02x\n", chip_addr[i]);
+		pr_info("Virtual chip at 0x%02x\n", chip_addr[i]);
 	}
 
 	/* Allocate memory for all chips at once */
 	stub_chips_nr = i;
 	stub_chips = kcalloc(stub_chips_nr, sizeof(struct stub_chip),
 			     GFP_KERNEL);
-	if (!stub_chips) {
-		pr_err("i2c-stub: Out of memory\n");
+	if (!stub_chips)
 		return -ENOMEM;
-	}
+
 	for (i = 0; i < stub_chips_nr; i++) {
 		INIT_LIST_HEAD(&stub_chips[i].smbus_blocks);
 
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 72d0ece70ed3..00ca5b86a753 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -295,6 +295,8 @@ static inline int i2c_slave_event(struct i2c_client *client,
 {
 	return client->slave_cb(client, event, val);
 }
+#else
+static inline bool i2c_detect_slave_mode(struct device *dev) { return false; }
 #endif
 
 /**
diff --git a/include/linux/i2c/i2c-sh_mobile.h b/include/linux/i2c/i2c-sh_mobile.h
deleted file mode 100644
index 06e3089795fb..000000000000
--- a/include/linux/i2c/i2c-sh_mobile.h
+++ /dev/null
@@ -1,11 +0,0 @@
-#ifndef __I2C_SH_MOBILE_H__
-#define __I2C_SH_MOBILE_H__
-
-#include <linux/platform_device.h>
-
-struct i2c_sh_mobile_platform_data {
-	unsigned long bus_speed;
-	unsigned int clks_per_count;
-};
-
-#endif /* __I2C_SH_MOBILE_H__ */
diff --git a/include/trace/events/i2c.h b/include/trace/events/i2c.h
index 4abb8eab34d3..86a401190df9 100644
--- a/include/trace/events/i2c.h
+++ b/include/trace/events/i2c.h
@@ -1,4 +1,4 @@
-/* I2C and SMBUS message transfer tracepoints
+/* I2C message transfer tracepoints
  *
  * Copyright (C) 2013 Red Hat, Inc. All Rights Reserved.
  * Written by David Howells (dhowells@redhat.com)
@@ -18,7 +18,7 @@
 #include <linux/tracepoint.h>
 
 /*
- * drivers/i2c/i2c-core.c
+ * drivers/i2c/i2c-core-base.c
  */
 extern int i2c_transfer_trace_reg(void);
 extern void i2c_transfer_trace_unreg(void);
@@ -144,228 +144,6 @@ TRACE_EVENT_FN(i2c_result,
 	       i2c_transfer_trace_reg,
 	       i2c_transfer_trace_unreg);
 
-/*
- * i2c_smbus_xfer() write data or procedure call request
- */
-TRACE_EVENT_CONDITION(smbus_write,
-	TP_PROTO(const struct i2c_adapter *adap,
-		 u16 addr, unsigned short flags,
-		 char read_write, u8 command, int protocol,
-		 const union i2c_smbus_data *data),
-	TP_ARGS(adap, addr, flags, read_write, command, protocol, data),
-	TP_CONDITION(read_write == I2C_SMBUS_WRITE ||
-		     protocol == I2C_SMBUS_PROC_CALL ||
-		     protocol == I2C_SMBUS_BLOCK_PROC_CALL),
-	TP_STRUCT__entry(
-		__field(int,	adapter_nr		)
-		__field(__u16,	addr			)
-		__field(__u16,	flags			)
-		__field(__u8,	command			)
-		__field(__u8,	len			)
-		__field(__u32,	protocol		)
-		__array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2)	),
-	TP_fast_assign(
-		__entry->adapter_nr = adap->nr;
-		__entry->addr = addr;
-		__entry->flags = flags;
-		__entry->command = command;
-		__entry->protocol = protocol;
-
-		switch (protocol) {
-		case I2C_SMBUS_BYTE_DATA:
-			__entry->len = 1;
-			goto copy;
-		case I2C_SMBUS_WORD_DATA:
-		case I2C_SMBUS_PROC_CALL:
-			__entry->len = 2;
-			goto copy;
-		case I2C_SMBUS_BLOCK_DATA:
-		case I2C_SMBUS_BLOCK_PROC_CALL:
-		case I2C_SMBUS_I2C_BLOCK_DATA:
-			__entry->len = data->block[0] + 1;
-		copy:
-			memcpy(__entry->buf, data->block, __entry->len);
-			break;
-		case I2C_SMBUS_QUICK:
-		case I2C_SMBUS_BYTE:
-		case I2C_SMBUS_I2C_BLOCK_BROKEN:
-		default:
-			__entry->len = 0;
-		}
-		       ),
-	TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]",
-		  __entry->adapter_nr,
-		  __entry->addr,
-		  __entry->flags,
-		  __entry->command,
-		  __print_symbolic(__entry->protocol,
-				   { I2C_SMBUS_QUICK,		"QUICK"	},
-				   { I2C_SMBUS_BYTE,		"BYTE"	},
-				   { I2C_SMBUS_BYTE_DATA,		"BYTE_DATA" },
-				   { I2C_SMBUS_WORD_DATA,		"WORD_DATA" },
-				   { I2C_SMBUS_PROC_CALL,		"PROC_CALL" },
-				   { I2C_SMBUS_BLOCK_DATA,		"BLOCK_DATA" },
-				   { I2C_SMBUS_I2C_BLOCK_BROKEN,	"I2C_BLOCK_BROKEN" },
-				   { I2C_SMBUS_BLOCK_PROC_CALL,	"BLOCK_PROC_CALL" },
-				   { I2C_SMBUS_I2C_BLOCK_DATA,	"I2C_BLOCK_DATA" }),
-		  __entry->len,
-		  __entry->len, __entry->buf
-		  ));
-
-/*
- * i2c_smbus_xfer() read data request
- */
-TRACE_EVENT_CONDITION(smbus_read,
-	TP_PROTO(const struct i2c_adapter *adap,
-		 u16 addr, unsigned short flags,
-		 char read_write, u8 command, int protocol),
-	TP_ARGS(adap, addr, flags, read_write, command, protocol),
-	TP_CONDITION(!(read_write == I2C_SMBUS_WRITE ||
-		       protocol == I2C_SMBUS_PROC_CALL ||
-		       protocol == I2C_SMBUS_BLOCK_PROC_CALL)),
-	TP_STRUCT__entry(
-		__field(int,	adapter_nr		)
-		__field(__u16,	flags			)
-		__field(__u16,	addr			)
-		__field(__u8,	command			)
-		__field(__u32,	protocol		)
-		__array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2)	),
-	TP_fast_assign(
-		__entry->adapter_nr = adap->nr;
-		__entry->addr = addr;
-		__entry->flags = flags;
-		__entry->command = command;
-		__entry->protocol = protocol;
-		       ),
-	TP_printk("i2c-%d a=%03x f=%04x c=%x %s",
-		  __entry->adapter_nr,
-		  __entry->addr,
-		  __entry->flags,
-		  __entry->command,
-		  __print_symbolic(__entry->protocol,
-				   { I2C_SMBUS_QUICK,		"QUICK"	},
-				   { I2C_SMBUS_BYTE,		"BYTE"	},
-				   { I2C_SMBUS_BYTE_DATA,		"BYTE_DATA" },
-				   { I2C_SMBUS_WORD_DATA,		"WORD_DATA" },
-				   { I2C_SMBUS_PROC_CALL,		"PROC_CALL" },
-				   { I2C_SMBUS_BLOCK_DATA,		"BLOCK_DATA" },
-				   { I2C_SMBUS_I2C_BLOCK_BROKEN,	"I2C_BLOCK_BROKEN" },
-				   { I2C_SMBUS_BLOCK_PROC_CALL,	"BLOCK_PROC_CALL" },
-				   { I2C_SMBUS_I2C_BLOCK_DATA,	"I2C_BLOCK_DATA" })
-		  ));
-
-/*
- * i2c_smbus_xfer() read data or procedure call reply
- */
-TRACE_EVENT_CONDITION(smbus_reply,
-	TP_PROTO(const struct i2c_adapter *adap,
-		 u16 addr, unsigned short flags,
-		 char read_write, u8 command, int protocol,
-		 const union i2c_smbus_data *data),
-	TP_ARGS(adap, addr, flags, read_write, command, protocol, data),
-	TP_CONDITION(read_write == I2C_SMBUS_READ),
-	TP_STRUCT__entry(
-		__field(int,	adapter_nr		)
-		__field(__u16,	addr			)
-		__field(__u16,	flags			)
-		__field(__u8,	command			)
-		__field(__u8,	len			)
-		__field(__u32,	protocol		)
-		__array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2)	),
-	TP_fast_assign(
-		__entry->adapter_nr = adap->nr;
-		__entry->addr = addr;
-		__entry->flags = flags;
-		__entry->command = command;
-		__entry->protocol = protocol;
-
-		switch (protocol) {
-		case I2C_SMBUS_BYTE:
-		case I2C_SMBUS_BYTE_DATA:
-			__entry->len = 1;
-			goto copy;
-		case I2C_SMBUS_WORD_DATA:
-		case I2C_SMBUS_PROC_CALL:
-			__entry->len = 2;
-			goto copy;
-		case I2C_SMBUS_BLOCK_DATA:
-		case I2C_SMBUS_BLOCK_PROC_CALL:
-		case I2C_SMBUS_I2C_BLOCK_DATA:
-			__entry->len = data->block[0] + 1;
-		copy:
-			memcpy(__entry->buf, data->block, __entry->len);
-			break;
-		case I2C_SMBUS_QUICK:
-		case I2C_SMBUS_I2C_BLOCK_BROKEN:
-		default:
-			__entry->len = 0;
-		}
-		       ),
-	TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]",
-		  __entry->adapter_nr,
-		  __entry->addr,
-		  __entry->flags,
-		  __entry->command,
-		  __print_symbolic(__entry->protocol,
-				   { I2C_SMBUS_QUICK,		"QUICK"	},
-				   { I2C_SMBUS_BYTE,		"BYTE"	},
-				   { I2C_SMBUS_BYTE_DATA,		"BYTE_DATA" },
-				   { I2C_SMBUS_WORD_DATA,		"WORD_DATA" },
-				   { I2C_SMBUS_PROC_CALL,		"PROC_CALL" },
-				   { I2C_SMBUS_BLOCK_DATA,		"BLOCK_DATA" },
-				   { I2C_SMBUS_I2C_BLOCK_BROKEN,	"I2C_BLOCK_BROKEN" },
-				   { I2C_SMBUS_BLOCK_PROC_CALL,	"BLOCK_PROC_CALL" },
-				   { I2C_SMBUS_I2C_BLOCK_DATA,	"I2C_BLOCK_DATA" }),
-		  __entry->len,
-		  __entry->len, __entry->buf
-		  ));
-
-/*
- * i2c_smbus_xfer() result
- */
-TRACE_EVENT(smbus_result,
-	    TP_PROTO(const struct i2c_adapter *adap,
-		     u16 addr, unsigned short flags,
-		     char read_write, u8 command, int protocol,
-		     int res),
-	    TP_ARGS(adap, addr, flags, read_write, command, protocol, res),
-	    TP_STRUCT__entry(
-		    __field(int,	adapter_nr		)
-		    __field(__u16,	addr			)
-		    __field(__u16,	flags			)
-		    __field(__u8,	read_write		)
-		    __field(__u8,	command			)
-		    __field(__s16,	res			)
-		    __field(__u32,	protocol		)
-			     ),
-	    TP_fast_assign(
-		    __entry->adapter_nr = adap->nr;
-		    __entry->addr = addr;
-		    __entry->flags = flags;
-		    __entry->read_write = read_write;
-		    __entry->command = command;
-		    __entry->protocol = protocol;
-		    __entry->res = res;
-			   ),
-	    TP_printk("i2c-%d a=%03x f=%04x c=%x %s %s res=%d",
-		      __entry->adapter_nr,
-		      __entry->addr,
-		      __entry->flags,
-		      __entry->command,
-		      __print_symbolic(__entry->protocol,
-				       { I2C_SMBUS_QUICK,		"QUICK"	},
-				       { I2C_SMBUS_BYTE,		"BYTE"	},
-				       { I2C_SMBUS_BYTE_DATA,		"BYTE_DATA" },
-				       { I2C_SMBUS_WORD_DATA,		"WORD_DATA" },
-				       { I2C_SMBUS_PROC_CALL,		"PROC_CALL" },
-				       { I2C_SMBUS_BLOCK_DATA,		"BLOCK_DATA" },
-				       { I2C_SMBUS_I2C_BLOCK_BROKEN,	"I2C_BLOCK_BROKEN" },
-				       { I2C_SMBUS_BLOCK_PROC_CALL,	"BLOCK_PROC_CALL" },
-				       { I2C_SMBUS_I2C_BLOCK_DATA,	"I2C_BLOCK_DATA" }),
-		      __entry->read_write == I2C_SMBUS_WRITE ? "wr" : "rd",
-		      __entry->res
-		      ));
-
 #endif /* _TRACE_I2C_H */
 
 /* This part must be outside protection */
diff --git a/include/trace/events/smbus.h b/include/trace/events/smbus.h
new file mode 100644
index 000000000000..d2fb6e1d3e10
--- /dev/null
+++ b/include/trace/events/smbus.h
@@ -0,0 +1,249 @@
+/* SMBUS message transfer tracepoints
+ *
+ * Copyright (C) 2013 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#undef TRACE_SYSTEM
+#define TRACE_SYSTEM smbus
+
+#if !defined(_TRACE_SMBUS_H) || defined(TRACE_HEADER_MULTI_READ)
+#define _TRACE_SMBUS_H
+
+#include <linux/i2c.h>
+#include <linux/tracepoint.h>
+
+/*
+ * drivers/i2c/i2c-core-smbus.c
+ */
+
+/*
+ * i2c_smbus_xfer() write data or procedure call request
+ */
+TRACE_EVENT_CONDITION(smbus_write,
+	TP_PROTO(const struct i2c_adapter *adap,
+		 u16 addr, unsigned short flags,
+		 char read_write, u8 command, int protocol,
+		 const union i2c_smbus_data *data),
+	TP_ARGS(adap, addr, flags, read_write, command, protocol, data),
+	TP_CONDITION(read_write == I2C_SMBUS_WRITE ||
+		     protocol == I2C_SMBUS_PROC_CALL ||
+		     protocol == I2C_SMBUS_BLOCK_PROC_CALL),
+	TP_STRUCT__entry(
+		__field(int,	adapter_nr		)
+		__field(__u16,	addr			)
+		__field(__u16,	flags			)
+		__field(__u8,	command			)
+		__field(__u8,	len			)
+		__field(__u32,	protocol		)
+		__array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2)	),
+	TP_fast_assign(
+		__entry->adapter_nr = adap->nr;
+		__entry->addr = addr;
+		__entry->flags = flags;
+		__entry->command = command;
+		__entry->protocol = protocol;
+
+		switch (protocol) {
+		case I2C_SMBUS_BYTE_DATA:
+			__entry->len = 1;
+			goto copy;
+		case I2C_SMBUS_WORD_DATA:
+		case I2C_SMBUS_PROC_CALL:
+			__entry->len = 2;
+			goto copy;
+		case I2C_SMBUS_BLOCK_DATA:
+		case I2C_SMBUS_BLOCK_PROC_CALL:
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			__entry->len = data->block[0] + 1;
+		copy:
+			memcpy(__entry->buf, data->block, __entry->len);
+			break;
+		case I2C_SMBUS_QUICK:
+		case I2C_SMBUS_BYTE:
+		case I2C_SMBUS_I2C_BLOCK_BROKEN:
+		default:
+			__entry->len = 0;
+		}
+		       ),
+	TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]",
+		  __entry->adapter_nr,
+		  __entry->addr,
+		  __entry->flags,
+		  __entry->command,
+		  __print_symbolic(__entry->protocol,
+				   { I2C_SMBUS_QUICK,		"QUICK"	},
+				   { I2C_SMBUS_BYTE,		"BYTE"	},
+				   { I2C_SMBUS_BYTE_DATA,		"BYTE_DATA" },
+				   { I2C_SMBUS_WORD_DATA,		"WORD_DATA" },
+				   { I2C_SMBUS_PROC_CALL,		"PROC_CALL" },
+				   { I2C_SMBUS_BLOCK_DATA,		"BLOCK_DATA" },
+				   { I2C_SMBUS_I2C_BLOCK_BROKEN,	"I2C_BLOCK_BROKEN" },
+				   { I2C_SMBUS_BLOCK_PROC_CALL,	"BLOCK_PROC_CALL" },
+				   { I2C_SMBUS_I2C_BLOCK_DATA,	"I2C_BLOCK_DATA" }),
+		  __entry->len,
+		  __entry->len, __entry->buf
+		  ));
+
+/*
+ * i2c_smbus_xfer() read data request
+ */
+TRACE_EVENT_CONDITION(smbus_read,
+	TP_PROTO(const struct i2c_adapter *adap,
+		 u16 addr, unsigned short flags,
+		 char read_write, u8 command, int protocol),
+	TP_ARGS(adap, addr, flags, read_write, command, protocol),
+	TP_CONDITION(!(read_write == I2C_SMBUS_WRITE ||
+		       protocol == I2C_SMBUS_PROC_CALL ||
+		       protocol == I2C_SMBUS_BLOCK_PROC_CALL)),
+	TP_STRUCT__entry(
+		__field(int,	adapter_nr		)
+		__field(__u16,	flags			)
+		__field(__u16,	addr			)
+		__field(__u8,	command			)
+		__field(__u32,	protocol		)
+		__array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2)	),
+	TP_fast_assign(
+		__entry->adapter_nr = adap->nr;
+		__entry->addr = addr;
+		__entry->flags = flags;
+		__entry->command = command;
+		__entry->protocol = protocol;
+		       ),
+	TP_printk("i2c-%d a=%03x f=%04x c=%x %s",
+		  __entry->adapter_nr,
+		  __entry->addr,
+		  __entry->flags,
+		  __entry->command,
+		  __print_symbolic(__entry->protocol,
+				   { I2C_SMBUS_QUICK,		"QUICK"	},
+				   { I2C_SMBUS_BYTE,		"BYTE"	},
+				   { I2C_SMBUS_BYTE_DATA,		"BYTE_DATA" },
+				   { I2C_SMBUS_WORD_DATA,		"WORD_DATA" },
+				   { I2C_SMBUS_PROC_CALL,		"PROC_CALL" },
+				   { I2C_SMBUS_BLOCK_DATA,		"BLOCK_DATA" },
+				   { I2C_SMBUS_I2C_BLOCK_BROKEN,	"I2C_BLOCK_BROKEN" },
+				   { I2C_SMBUS_BLOCK_PROC_CALL,	"BLOCK_PROC_CALL" },
+				   { I2C_SMBUS_I2C_BLOCK_DATA,	"I2C_BLOCK_DATA" })
+		  ));
+
+/*
+ * i2c_smbus_xfer() read data or procedure call reply
+ */
+TRACE_EVENT_CONDITION(smbus_reply,
+	TP_PROTO(const struct i2c_adapter *adap,
+		 u16 addr, unsigned short flags,
+		 char read_write, u8 command, int protocol,
+		 const union i2c_smbus_data *data),
+	TP_ARGS(adap, addr, flags, read_write, command, protocol, data),
+	TP_CONDITION(read_write == I2C_SMBUS_READ),
+	TP_STRUCT__entry(
+		__field(int,	adapter_nr		)
+		__field(__u16,	addr			)
+		__field(__u16,	flags			)
+		__field(__u8,	command			)
+		__field(__u8,	len			)
+		__field(__u32,	protocol		)
+		__array(__u8, buf, I2C_SMBUS_BLOCK_MAX + 2)	),
+	TP_fast_assign(
+		__entry->adapter_nr = adap->nr;
+		__entry->addr = addr;
+		__entry->flags = flags;
+		__entry->command = command;
+		__entry->protocol = protocol;
+
+		switch (protocol) {
+		case I2C_SMBUS_BYTE:
+		case I2C_SMBUS_BYTE_DATA:
+			__entry->len = 1;
+			goto copy;
+		case I2C_SMBUS_WORD_DATA:
+		case I2C_SMBUS_PROC_CALL:
+			__entry->len = 2;
+			goto copy;
+		case I2C_SMBUS_BLOCK_DATA:
+		case I2C_SMBUS_BLOCK_PROC_CALL:
+		case I2C_SMBUS_I2C_BLOCK_DATA:
+			__entry->len = data->block[0] + 1;
+		copy:
+			memcpy(__entry->buf, data->block, __entry->len);
+			break;
+		case I2C_SMBUS_QUICK:
+		case I2C_SMBUS_I2C_BLOCK_BROKEN:
+		default:
+			__entry->len = 0;
+		}
+		       ),
+	TP_printk("i2c-%d a=%03x f=%04x c=%x %s l=%u [%*phD]",
+		  __entry->adapter_nr,
+		  __entry->addr,
+		  __entry->flags,
+		  __entry->command,
+		  __print_symbolic(__entry->protocol,
+				   { I2C_SMBUS_QUICK,		"QUICK"	},
+				   { I2C_SMBUS_BYTE,		"BYTE"	},
+				   { I2C_SMBUS_BYTE_DATA,		"BYTE_DATA" },
+				   { I2C_SMBUS_WORD_DATA,		"WORD_DATA" },
+				   { I2C_SMBUS_PROC_CALL,		"PROC_CALL" },
+				   { I2C_SMBUS_BLOCK_DATA,		"BLOCK_DATA" },
+				   { I2C_SMBUS_I2C_BLOCK_BROKEN,	"I2C_BLOCK_BROKEN" },
+				   { I2C_SMBUS_BLOCK_PROC_CALL,	"BLOCK_PROC_CALL" },
+				   { I2C_SMBUS_I2C_BLOCK_DATA,	"I2C_BLOCK_DATA" }),
+		  __entry->len,
+		  __entry->len, __entry->buf
+		  ));
+
+/*
+ * i2c_smbus_xfer() result
+ */
+TRACE_EVENT(smbus_result,
+	    TP_PROTO(const struct i2c_adapter *adap,
+		     u16 addr, unsigned short flags,
+		     char read_write, u8 command, int protocol,
+		     int res),
+	    TP_ARGS(adap, addr, flags, read_write, command, protocol, res),
+	    TP_STRUCT__entry(
+		    __field(int,	adapter_nr		)
+		    __field(__u16,	addr			)
+		    __field(__u16,	flags			)
+		    __field(__u8,	read_write		)
+		    __field(__u8,	command			)
+		    __field(__s16,	res			)
+		    __field(__u32,	protocol		)
+			     ),
+	    TP_fast_assign(
+		    __entry->adapter_nr = adap->nr;
+		    __entry->addr = addr;
+		    __entry->flags = flags;
+		    __entry->read_write = read_write;
+		    __entry->command = command;
+		    __entry->protocol = protocol;
+		    __entry->res = res;
+			   ),
+	    TP_printk("i2c-%d a=%03x f=%04x c=%x %s %s res=%d",
+		      __entry->adapter_nr,
+		      __entry->addr,
+		      __entry->flags,
+		      __entry->command,
+		      __print_symbolic(__entry->protocol,
+				       { I2C_SMBUS_QUICK,		"QUICK"	},
+				       { I2C_SMBUS_BYTE,		"BYTE"	},
+				       { I2C_SMBUS_BYTE_DATA,		"BYTE_DATA" },
+				       { I2C_SMBUS_WORD_DATA,		"WORD_DATA" },
+				       { I2C_SMBUS_PROC_CALL,		"PROC_CALL" },
+				       { I2C_SMBUS_BLOCK_DATA,		"BLOCK_DATA" },
+				       { I2C_SMBUS_I2C_BLOCK_BROKEN,	"I2C_BLOCK_BROKEN" },
+				       { I2C_SMBUS_BLOCK_PROC_CALL,	"BLOCK_PROC_CALL" },
+				       { I2C_SMBUS_I2C_BLOCK_DATA,	"I2C_BLOCK_DATA" }),
+		      __entry->read_write == I2C_SMBUS_WRITE ? "wr" : "rd",
+		      __entry->res
+		      ));
+
+#endif /* _TRACE_SMBUS_H */
+
+/* This part must be outside protection */
+#include <trace/define_trace.h>