Merge tag 'imx-fixes-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes

i.MX fixes for 5.10, 3rd round:

- A series from Krzysztof Kozlowski to fix missing PMIC's interrupt
  line pull-up for i.MX8MM and i.MX8MN boards.
- Set Bluetooth chip max-speed to 4000000 on imx8mm-beacon-som board
  to fix the choppy Bluetooth audio sound.
- Remove non-existent OTG2, usbphynop2, and the usbmisc2 from i.MX8MN
  device tree.
- Fix the endianness setting of RCPM node on Layerscape SoCs.
- Add the missing dma-coherent property for qoriq-fman device to improve
  the performance.
- Fix the Ethernet PHY address on imx6q-prti6q board.

* tag 'imx-fixes-5.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
  ARM: dts: imx6q-prti6q: fix PHY address
  arm64: dts imx8mn: Remove non-existent USB OTG2
  arm64: dts: imx8mm-beacon-som: Fix Choppy BT audio
  arm64: dts: fsl: DPAA FMan DMA operations are coherent
  arm64: dts: fsl: fix endianness issue of rcpm
  arm64: dts: imx8mn-evk: fix missing PMIC's interrupt line pull-up
  arm64: dts: imx8mn-ddr4-evk: fix missing PMIC's interrupt line pull-up
  arm64: dts: imx8mn-var-som: fix missing PMIC's interrupt line pull-up
  arm64: dts: imx8mm-evk: fix missing PMIC's interrupt line pull-up
  arm64: dts: imx8mm-beacon-som: fix missing PMIC's interrupt line pull-up
  arm64: dts: imx8mm-var-som: fix missing PMIC's interrupt line pull-up

Link: https://lore.kernel.org/r/20201030151821.GA28266@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

12 files changed, 17 insertions, 44 deletions

diff --git a/arch/arm/boot/dts/imx6q-prti6q.dts b/arch/arm/boot/dts/imx6q-prti6q.dts
index d112b50f8c5d..b4605edfd2ab 100644
--- a/arch/arm/boot/dts/imx6q-prti6q.dts
+++ b/arch/arm/boot/dts/imx6q-prti6q.dts
@@ -213,8 +213,8 @@
 		#size-cells = <0>;
 
 		/* Microchip KSZ9031RNX PHY */
-		rgmii_phy: ethernet-phy@4 {
-			reg = <4>;
+		rgmii_phy: ethernet-phy@0 {
+			reg = <0>;
 			interrupts-extended = <&gpio1 28 IRQ_TYPE_LEVEL_LOW>;
 			reset-gpios = <&gpio1 25 GPIO_ACTIVE_LOW>;
 			reset-assert-us = <10000>;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
index 73e4f9466887..7a6fb7e1fb82 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1028a.dtsi
@@ -1012,6 +1012,7 @@
 			compatible = "fsl,ls1028a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1e34040 0x0 0x1c>;
 			#fsl,rcpm-wakeup-cells = <7>;
+			little-endian;
 		};
 
 		ftm_alarm0: timer@2800000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
index ff5805206a28..692d8f4a206d 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1088a.dtsi
@@ -805,6 +805,7 @@
 			compatible = "fsl,ls1088a-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1e34040 0x0 0x18>;
 			#fsl,rcpm-wakeup-cells = <6>;
+			little-endian;
 		};
 
 		ftm_alarm0: timer@2800000 {
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
index bf72918fe545..e7abb74bd816 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls208xa.dtsi
@@ -892,6 +892,7 @@
 			compatible = "fsl,ls208xa-rcpm", "fsl,qoriq-rcpm-2.1+";
 			reg = <0x0 0x1e34040 0x0 0x18>;
 			#fsl,rcpm-wakeup-cells = <6>;
+			little-endian;
 		};
 
 		ftm_alarm0: timer@2800000 {
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
index 6de86a4f0ec4..b88c3c99b007 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-beacon-som.dtsi
@@ -72,6 +72,7 @@
 	pmic@4b {
 		compatible = "rohm,bd71847";
 		reg = <0x4b>;
+		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
@@ -210,6 +211,7 @@
 		host-wakeup-gpios = <&gpio2 8 GPIO_ACTIVE_HIGH>;
 		device-wakeup-gpios = <&gpio2 7 GPIO_ACTIVE_HIGH>;
 		clocks = <&osc_32k>;
+		max-speed = <4000000>;
 		clock-names = "extclk";
 	};
 };
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
index f305a530ff6f..521eb3a5a12e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dtsi
@@ -121,6 +121,7 @@
 	pmic@4b {
 		compatible = "rohm,bd71847";
 		reg = <0x4b>;
+		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
index 4107fe914d08..49082529764f 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mm-var-som.dtsi
@@ -135,13 +135,10 @@
 	pmic@4b {
 		compatible = "rohm,bd71847";
 		reg = <0x4b>;
+		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio2>;
-		/*
-		 * The interrupt is not correct. It should be level low,
-		 * however with internal pull up this causes IRQ storm.
-		 */
-		interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		rohm,reset-snvs-powered;
 
 		#clock-cells = <0>;
@@ -398,7 +395,7 @@
 
 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
-			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x41
+			MX8MM_IOMUXC_SD1_DATA6_GPIO2_IO8	0x141
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
index 46e76cf32b2f..7dfee715a2c4 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-ddr4-evk.dts
@@ -53,6 +53,7 @@
 	pmic@4b {
 		compatible = "rohm,bd71847";
 		reg = <0x4b>;
+		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
index 707d8486b4d8..8311b95dee49 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mn-evk.dts
@@ -18,6 +18,7 @@
 	pmic: pmic@25 {
 		compatible = "nxp,pca9450b";
 		reg = <0x25>;
+		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio1>;
 		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
diff --git a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
index a2d0190921e4..7f356edf9f91 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn-var-som.dtsi
@@ -116,13 +116,10 @@
 	pmic@4b {
 		compatible = "rohm,bd71847";
 		reg = <0x4b>;
+		pinctrl-names = "default";
 		pinctrl-0 = <&pinctrl_pmic>;
 		interrupt-parent = <&gpio2>;
-		/*
-		 * The interrupt is not correct. It should be level low,
-		 * however with internal pull up this causes IRQ storm.
-		 */
-		interrupts = <8 IRQ_TYPE_EDGE_RISING>;
+		interrupts = <8 IRQ_TYPE_LEVEL_LOW>;
 		rohm,reset-snvs-powered;
 
 		regulators {
@@ -388,7 +385,7 @@
 
 	pinctrl_pmic: pmicirqgrp {
 		fsl,pins = <
-			MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8	0x101
+			MX8MN_IOMUXC_SD1_DATA6_GPIO2_IO8	0x141
 		>;
 	};
 
diff --git a/arch/arm64/boot/dts/freescale/imx8mn.dtsi b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
index 746faf1cf2fb..16c7202885d7 100644
--- a/arch/arm64/boot/dts/freescale/imx8mn.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mn.dtsi
@@ -790,28 +790,6 @@
 				#index-cells = <1>;
 				reg = <0x32e40200 0x200>;
 			};
-
-			usbotg2: usb@32e50000 {
-				compatible = "fsl,imx8mn-usb", "fsl,imx7d-usb";
-				reg = <0x32e50000 0x200>;
-				interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
-				clocks = <&clk IMX8MN_CLK_USB1_CTRL_ROOT>;
-				clock-names = "usb1_ctrl_root_clk";
-				assigned-clocks = <&clk IMX8MN_CLK_USB_BUS>,
-						  <&clk IMX8MN_CLK_USB_CORE_REF>;
-				assigned-clock-parents = <&clk IMX8MN_SYS_PLL2_500M>,
-							 <&clk IMX8MN_SYS_PLL1_100M>;
-				fsl,usbphy = <&usbphynop2>;
-				fsl,usbmisc = <&usbmisc2 0>;
-				status = "disabled";
-			};
-
-			usbmisc2: usbmisc@32e50200 {
-				compatible = "fsl,imx8mn-usbmisc", "fsl,imx7d-usbmisc";
-				#index-cells = <1>;
-				reg = <0x32e50200 0x200>;
-			};
-
 		};
 
 		dma_apbh: dma-controller@33000000 {
@@ -876,12 +854,4 @@
 		assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
 		clock-names = "main_clk";
 	};
-
-	usbphynop2: usbphynop2 {
-		compatible = "usb-nop-xceiv";
-		clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
-		assigned-clocks = <&clk IMX8MN_CLK_USB_PHY_REF>;
-		assigned-clock-parents = <&clk IMX8MN_SYS_PLL1_100M>;
-		clock-names = "main_clk";
-	};
 };
diff --git a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
index 8bc6caa9167d..4338db14c5da 100644
--- a/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
+++ b/arch/arm64/boot/dts/freescale/qoriq-fman3-0.dtsi
@@ -19,6 +19,7 @@ fman0: fman@1a00000 {
 	clock-names = "fmanclk";
 	fsl,qman-channel-range = <0x800 0x10>;
 	ptimer-handle = <&ptp_timer0>;
+	dma-coherent;
 
 	muram@0 {
 		compatible = "fsl,fman-muram";