summaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
authorMario Limonciello <mario.limonciello@amd.com>2023-07-05 15:30:03 +0200
committerLinus Walleij <linus.walleij@linaro.org>2023-07-13 00:04:28 +0200
commit635a750d958e158e17af0f524bedc484b27fbb93 (patch)
tree6b32bc1d51c4b827a2a489525fede81fe7a858c8
parentpinctrl: amd: Only use special debounce behavior for GPIO 0 (diff)
downloadlinux-635a750d958e158e17af0f524bedc484b27fbb93.tar.xz
linux-635a750d958e158e17af0f524bedc484b27fbb93.zip
pinctrl: amd: Use amd_pinconf_set() for all config options
On ASUS TUF A16 it is reported that the ITE5570 ACPI device connected to GPIO 7 is causing an interrupt storm. This issue doesn't happen on Windows. Comparing the GPIO register configuration between Windows and Linux bit 20 has been configured as a pull up on Windows, but not on Linux. Checking GPIO declaration from the firmware it is clear it *should* have been a pull up on Linux as well. ``` GpioInt (Level, ActiveLow, Exclusive, PullUp, 0x0000, "\\_SB.GPIO", 0x00, ResourceConsumer, ,) { // Pin list 0x0007 } ``` On Linux amd_gpio_set_config() is currently only used for programming the debounce. Actually the GPIO core calls it with all the arguments that are supported by a GPIO, pinctrl-amd just responds `-ENOTSUPP`. To solve this issue expand amd_gpio_set_config() to support the other arguments amd_pinconf_set() supports, namely `PIN_CONFIG_BIAS_PULL_DOWN`, `PIN_CONFIG_BIAS_PULL_UP`, and `PIN_CONFIG_DRIVE_STRENGTH`. Reported-by: Nik P <npliashechnikov@gmail.com> Reported-by: Nathan Schulte <nmschulte@gmail.com> Reported-by: Friedrich Vock <friedrich.vock@gmx.de> Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217336 Reported-by: dridri85@gmail.com Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217493 Link: https://lore.kernel.org/linux-input/20230530154058.17594-1-friedrich.vock@gmx.de/ Tested-by: Jan Visser <starquake@linuxeverywhere.org> Fixes: 2956b5d94a76 ("pinctrl / gpio: Introduce .set_config() callback for GPIO chips") Signed-off-by: Mario Limonciello <mario.limonciello@amd.com> Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Link: https://lore.kernel.org/r/20230705133005.577-3-mario.limonciello@amd.com Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
-rw-r--r--drivers/pinctrl/pinctrl-amd.c28
1 files changed, 15 insertions, 13 deletions
diff --git a/drivers/pinctrl/pinctrl-amd.c b/drivers/pinctrl/pinctrl-amd.c
index 00d5b517b745..c71efd19f139 100644
--- a/drivers/pinctrl/pinctrl-amd.c
+++ b/drivers/pinctrl/pinctrl-amd.c
@@ -189,18 +189,6 @@ static int amd_gpio_set_debounce(struct gpio_chip *gc, unsigned offset,
return ret;
}
-static int amd_gpio_set_config(struct gpio_chip *gc, unsigned offset,
- unsigned long config)
-{
- u32 debounce;
-
- if (pinconf_to_config_param(config) != PIN_CONFIG_INPUT_DEBOUNCE)
- return -ENOTSUPP;
-
- debounce = pinconf_to_config_argument(config);
- return amd_gpio_set_debounce(gc, offset, debounce);
-}
-
#ifdef CONFIG_DEBUG_FS
static void amd_gpio_dbg_show(struct seq_file *s, struct gpio_chip *gc)
{
@@ -782,7 +770,7 @@ static int amd_pinconf_get(struct pinctrl_dev *pctldev,
}
static int amd_pinconf_set(struct pinctrl_dev *pctldev, unsigned int pin,
- unsigned long *configs, unsigned num_configs)
+ unsigned long *configs, unsigned int num_configs)
{
int i;
u32 arg;
@@ -872,6 +860,20 @@ static int amd_pinconf_group_set(struct pinctrl_dev *pctldev,
return 0;
}
+static int amd_gpio_set_config(struct gpio_chip *gc, unsigned int pin,
+ unsigned long config)
+{
+ struct amd_gpio *gpio_dev = gpiochip_get_data(gc);
+
+ if (pinconf_to_config_param(config) == PIN_CONFIG_INPUT_DEBOUNCE) {
+ u32 debounce = pinconf_to_config_argument(config);
+
+ return amd_gpio_set_debounce(gc, pin, debounce);
+ }
+
+ return amd_pinconf_set(gpio_dev->pctrl, pin, &config, 1);
+}
+
static const struct pinconf_ops amd_pinconf_ops = {
.pin_config_get = amd_pinconf_get,
.pin_config_set = amd_pinconf_set,