Merge tag 'ti-k3-soc-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux into arm/dt

Texas Instruments K3 SoC family changes for 5.3

- Add support for the new J721e SoC, includes basic peripherals needed for
  booting up the device
- New peripheral support added for AM654x:
  * TI SCI irqchip
  * GPIO
  * MCU SRAM
  * R5Fs
  * MSMC RAM
  * SERDES and PCIe

* tag 'ti-k3-soc-for-v5.3' of git://git.kernel.org/pub/scm/linux/kernel/git/kristo/linux: (26 commits)
  arm64: dts: ti: k3-j721e: Add the MCU SRAM node
  arm64: dts: ti: k3-j721e: Add interrupt controllers in wakeup domain
  arm64: dts: ti: k3-j721e: Add interrupt controllers in main domain
  arm64: dts: ti: k3-j721e-main: Add Main NavSS Interrupt controller node
  arm64: defconfig: Enable TI's J721E SoC platform
  arm64: dts: ti: Add support for J721E Common Processor Board
  soc: ti: Add Support for J721E SoC config option
  arm64: dts: ti: Add Support for J721E SoC
  dt-bindings: serial: 8250_omap: Add compatible for J721E UART controller
  dt-bindings: arm: ti: Add bindings for J721E SoC
  arm64: dts: ti: am654-base-board: Disable SERDES and PCIe
  arm64: dts: k3-am6: Add PCIe Endpoint DT node
  arm64: dts: k3-am6: Add PCIe Root Complex DT node
  arm64: dts: k3-am6: Add SERDES DT node
  arm64: dts: k3-am6: Add mux-controller DT node required for muxing SERDES
  arm64: dts: k3-am6: Add "socionext,synquacer-pre-its" property to gic_its
  arm64: dts: ti: k3-am65: Add MSMC RAM ranges in interconnect node
  arm64: dts: ti: k3-am65: Add R5F ranges in interconnect nodes
  arm64: dts: ti: k3-am65-mcu: Add the MCU RAM node
  arm64: dts: ti: k3-am65: Add MCU SRAM ranges in interconnect nodes
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

15 files changed, 896 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/arm/ti/k3.txt b/Documentation/devicetree/bindings/arm/ti/k3.txt
index 6a059cabb2da..333e7256126a 100644
--- a/Documentation/devicetree/bindings/arm/ti/k3.txt
+++ b/Documentation/devicetree/bindings/arm/ti/k3.txt
@@ -13,6 +13,9 @@ architecture it uses, using one of the following compatible values:
 - AM654
   compatible = "ti,am654";
 
+- J721E
+  compatible = "ti,j721e";
+
 Boards
 ------
 
diff --git a/Documentation/devicetree/bindings/serial/omap_serial.txt b/Documentation/devicetree/bindings/serial/omap_serial.txt
index 0a9b5444f4e6..dcba86b0a0d0 100644
--- a/Documentation/devicetree/bindings/serial/omap_serial.txt
+++ b/Documentation/devicetree/bindings/serial/omap_serial.txt
@@ -1,6 +1,7 @@
 OMAP UART controller
 
 Required properties:
+- compatible : should be "ti,j721e-uart", "ti,am654-uart" for J721E controllers
 - compatible : should be "ti,am654-uart" for AM654 controllers
 - compatible : should be "ti,omap2-uart" for OMAP2 controllers
 - compatible : should be "ti,omap3-uart" for OMAP3 controllers
diff --git a/arch/arm64/boot/dts/ti/Makefile b/arch/arm64/boot/dts/ti/Makefile
index 63e619d0b5b8..b397945fdf73 100644
--- a/arch/arm64/boot/dts/ti/Makefile
+++ b/arch/arm64/boot/dts/ti/Makefile
@@ -7,3 +7,5 @@
 #
 
 dtb-$(CONFIG_ARCH_K3_AM6_SOC) += k3-am654-base-board.dtb
+
+dtb-$(CONFIG_ARCH_K3_J721E_SOC) += k3-j721e-common-proc-board.dtb
diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
index 752455269fab..ca70ff73f171 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi
@@ -4,6 +4,7 @@
  *
  * Copyright (C) 2016-2018 Texas Instruments Incorporated - http://www.ti.com/
  */
+#include <dt-bindings/phy/phy-am654-serdes.h>
 
 &cbass_main {
 	msmc_ram: sram@70000000 {
@@ -44,6 +45,7 @@
 		gic_its: gic-its@18200000 {
 			compatible = "arm,gic-v3-its";
 			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
 			msi-controller;
 			#msi-cells = <1>;
 		};
@@ -60,6 +62,36 @@
 		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
 	};
 
+	serdes0: serdes@900000 {
+		compatible = "ti,phy-am654-serdes";
+		reg = <0x0 0x900000 0x0 0x2000>;
+		reg-names = "serdes";
+		#phy-cells = <2>;
+		power-domains = <&k3_pds 153>;
+		clocks = <&k3_clks 153 4>, <&k3_clks 153 1>, <&serdes1 AM654_SERDES_LO_REFCLK>;
+		clock-output-names = "serdes0_cmu_refclk", "serdes0_lo_refclk", "serdes0_ro_refclk";
+		assigned-clocks = <&k3_clks 153 4>, <&serdes0 AM654_SERDES_CMU_REFCLK>;
+		assigned-clock-parents = <&k3_clks 153 8>, <&k3_clks 153 4>;
+		ti,serdes-clk = <&serdes0_clk>;
+		#clock-cells = <1>;
+		mux-controls = <&serdes_mux 0>;
+	};
+
+	serdes1: serdes@910000 {
+		compatible = "ti,phy-am654-serdes";
+		reg = <0x0 0x910000 0x0 0x2000>;
+		reg-names = "serdes";
+		#phy-cells = <2>;
+		power-domains = <&k3_pds 154>;
+		clocks = <&serdes0 AM654_SERDES_RO_REFCLK>, <&k3_clks 154 1>, <&k3_clks 154 5>;
+		clock-output-names = "serdes1_cmu_refclk", "serdes1_lo_refclk", "serdes1_ro_refclk";
+		assigned-clocks = <&k3_clks 154 5>, <&serdes1 AM654_SERDES_CMU_REFCLK>;
+		assigned-clock-parents = <&k3_clks 154 9>, <&k3_clks 154 5>;
+		ti,serdes-clk = <&serdes1_clk>;
+		#clock-cells = <1>;
+		mux-controls = <&serdes_mux 1>;
+	};
+
 	main_uart0: serial@2800000 {
 		compatible = "ti,am654-uart";
 		reg = <0x00 0x02800000 0x00 0x100>;
@@ -232,6 +264,38 @@
 		#address-cells = <1>;
 		#size-cells = <1>;
 		ranges = <0x0 0x0 0x00100000 0x1c000>;
+
+		pcie0_mode: pcie-mode@4060 {
+			compatible = "syscon";
+			reg = <0x00004060 0x4>;
+		};
+
+		pcie1_mode: pcie-mode@4070 {
+			compatible = "syscon";
+			reg = <0x00004070 0x4>;
+		};
+
+		pcie_devid: pcie-devid@210 {
+			compatible = "syscon";
+			reg = <0x00000210 0x4>;
+		};
+
+		serdes0_clk: serdes_clk@4080 {
+			compatible = "syscon";
+			reg = <0x00004080 0x4>;
+		};
+
+		serdes1_clk: serdes_clk@4090 {
+			compatible = "syscon";
+			reg = <0x00004090 0x4>;
+		};
+
+		serdes_mux: mux-controller {
+			compatible = "mmio-mux";
+			#mux-control-cells = <1>;
+			mux-reg-masks = <0x4080 0x3>, /* SERDES0 lane select */
+					<0x4090 0x3>; /* SERDES1 lane select */
+		};
 	};
 
 	dwc3_0: dwc3@4000000 {
@@ -309,4 +373,141 @@
 		clock-names = "wkupclk", "refclk";
 		#phy-cells = <0>;
 	};
+
+	intr_main_gpio: interrupt-controller0 {
+		compatible = "ti,sci-intr";
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <2>;
+		ti,sci = <&dmsc>;
+		ti,sci-dst-id = <56>;
+		ti,sci-rm-range-girq = <0x1>;
+	};
+
+	cbass_main_navss: interconnect0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		intr_main_navss: interrupt-controller1 {
+			compatible = "ti,sci-intr";
+			ti,intr-trigger-type = <4>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			#interrupt-cells = <2>;
+			ti,sci = <&dmsc>;
+			ti,sci-dst-id = <56>;
+			ti,sci-rm-range-girq = <0x0>, <0x2>;
+		};
+
+		inta_main_udmass: interrupt-controller@33d00000 {
+			compatible = "ti,sci-inta";
+			reg = <0x0 0x33d00000 0x0 0x100000>;
+			interrupt-controller;
+			interrupt-parent = <&intr_main_navss>;
+			msi-controller;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <179>;
+			ti,sci-rm-range-vint = <0x0>;
+			ti,sci-rm-range-global-event = <0x1>;
+		};
+	};
+
+	main_gpio0:  main_gpio0@600000 {
+		compatible = "ti,am654-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x600000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&intr_main_gpio>;
+		interrupts = <57 256>, <57 257>, <57 258>, <57 259>, <57 260>,
+				<57 261>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <96>;
+		ti,davinci-gpio-unbanked = <0>;
+		clocks = <&k3_clks 57 0>;
+		clock-names = "gpio";
+	};
+
+	main_gpio1:  main_gpio1@601000 {
+		compatible = "ti,am654-gpio", "ti,keystone-gpio";
+		reg = <0x0 0x601000 0x0 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&intr_main_gpio>;
+		interrupts = <58 256>, <58 257>, <58 258>, <58 259>, <58 260>,
+				<58 261>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <90>;
+		ti,davinci-gpio-unbanked = <0>;
+		clocks = <&k3_clks 58 0>;
+		clock-names = "gpio";
+	};
+
+	pcie0_rc: pcie@5500000 {
+		compatible = "ti,am654-pcie-rc";
+		reg =  <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x2000>, <0x0 0x5506000 0x0 0x1000>;
+		reg-names = "app", "dbics", "config", "atu";
+		power-domains = <&k3_pds 120>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x81000000 0 0          0x0 0x10020000 0 0x00010000
+			  0x82000000 0 0x10030000 0x0 0x10030000 0 0x07FD0000>;
+		ti,syscon-pcie-id = <&pcie_devid>;
+		ti,syscon-pcie-mode = <&pcie0_mode>;
+		bus-range = <0x0 0xff>;
+		num-viewport = <16>;
+		max-link-speed = <3>;
+		dma-coherent;
+		interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+		msi-map = <0x0 &gic_its 0x0 0x10000>;
+	};
+
+	pcie0_ep: pcie-ep@5500000 {
+		compatible = "ti,am654-pcie-ep";
+		reg =  <0x0 0x5500000 0x0 0x1000>, <0x0 0x5501000 0x0 0x1000>, <0x0 0x10000000 0x0 0x8000000>, <0x0 0x5506000 0x0 0x1000>;
+		reg-names = "app", "dbics", "addr_space", "atu";
+		power-domains = <&k3_pds 120>;
+		ti,syscon-pcie-mode = <&pcie0_mode>;
+		num-ib-windows = <16>;
+		num-ob-windows = <16>;
+		max-link-speed = <3>;
+		dma-coherent;
+		interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
+	};
+
+	pcie1_rc: pcie@5600000 {
+		compatible = "ti,am654-pcie-rc";
+		reg =  <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x2000>, <0x0 0x5606000 0x0 0x1000>;
+		reg-names = "app", "dbics", "config", "atu";
+		power-domains = <&k3_pds 121>;
+		#address-cells = <3>;
+		#size-cells = <2>;
+		ranges = <0x81000000 0 0          0x0   0x18020000 0 0x00010000
+			  0x82000000 0 0x18030000 0x0   0x18030000 0 0x07FD0000>;
+		ti,syscon-pcie-id = <&pcie_devid>;
+		ti,syscon-pcie-mode = <&pcie1_mode>;
+		bus-range = <0x0 0xff>;
+		num-viewport = <16>;
+		max-link-speed = <3>;
+		dma-coherent;
+		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
+		msi-map = <0x0 &gic_its 0x10000 0x10000>;
+	};
+
+	pcie1_ep: pcie-ep@5600000 {
+		compatible = "ti,am654-pcie-ep";
+		reg =  <0x0 0x5600000 0x0 0x1000>, <0x0 0x5601000 0x0 0x1000>, <0x0 0x18000000 0x0 0x4000000>, <0x0 0x5606000 0x0 0x1000>;
+		reg-names = "app", "dbics", "addr_space", "atu";
+		power-domains = <&k3_pds 121>;
+		ti,syscon-pcie-mode = <&pcie1_mode>;
+		num-ib-windows = <16>;
+		num-ob-windows = <16>;
+		max-link-speed = <3>;
+		dma-coherent;
+		interrupts = <GIC_SPI 355 IRQ_TYPE_EDGE_RISING>;
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
index 6f7d2b316ded..afc29eaa2638 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-mcu.dtsi
@@ -17,6 +17,14 @@
 			power-domains = <&k3_pds 149>;
 	};
 
+	mcu_ram: sram@41c00000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x41c00000 0x00 0x80000>;
+		ranges = <0x0 0x00 0x41c00000 0x80000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
 	mcu_i2c0: i2c@40b00000 {
 		compatible = "ti,am654-i2c", "ti,omap4-i2c";
 		reg = <0x0 0x40b00000 0x0 0x100>;
diff --git a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
index 7cbdc0912ab7..9cf2c0849a24 100644
--- a/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65-wakeup.dtsi
@@ -7,7 +7,7 @@
 
 &cbass_wakeup {
 	dmsc: dmsc {
-		compatible = "ti,k2g-sci";
+		compatible = "ti,am654-sci";
 		ti,host-id = <12>;
 		#address-cells = <1>;
 		#size-cells = <1>;
@@ -63,4 +63,30 @@
 		clocks = <&k3_clks 115 1>;
 		power-domains = <&k3_pds 115>;
 	};
+
+	intr_wkup_gpio: interrupt-controller2 {
+		compatible = "ti,sci-intr";
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <2>;
+		ti,sci = <&dmsc>;
+		ti,sci-dst-id = <56>;
+		ti,sci-rm-range-girq = <0x4>;
+	};
+
+	wkup_gpio0: wkup_gpio0@42110000 {
+		compatible = "ti,am654-gpio", "ti,keystone-gpio";
+		reg = <0x42110000 0x100>;
+		gpio-controller;
+		#gpio-cells = <2>;
+		interrupt-parent = <&intr_wkup_gpio>;
+		interrupts = <59 128>, <59 129>, <59 130>, <59 131>;
+		interrupt-controller;
+		#interrupt-cells = <2>;
+		ti,ngpio = <56>;
+		ti,davinci-gpio-unbanked = <0>;
+		clocks = <&k3_clks 59 0>;
+		clock-names = "gpio";
+	};
 };
diff --git a/arch/arm64/boot/dts/ti/k3-am65.dtsi b/arch/arm64/boot/dts/ti/k3-am65.dtsi
index 50f4be2047a9..82edf10b2378 100644
--- a/arch/arm64/boot/dts/ti/k3-am65.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am65.dtsi
@@ -68,9 +68,14 @@
 			 <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
 			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
 			 <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00200000>, /* MSMC SRAM */
+			 <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
 			 /* MCUSS Range */
 			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
 			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>,
+			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>,
 			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
 			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
 			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
@@ -82,6 +87,9 @@
 			#size-cells = <2>;
 			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
 				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00900100>, /* First peripheral window */
+				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00080000>, /* MCU SRAM */
 				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP */
 				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
 				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
diff --git a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
index cf1aa276a1ea..52c245d36db9 100644
--- a/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-am654-base-board.dts
@@ -6,6 +6,7 @@
 /dts-v1/;
 
 #include "k3-am654.dtsi"
+#include <dt-bindings/input/input.h>
 
 / {
 	compatible =  "ti,am654-evm", "ti,am654";
@@ -33,6 +34,25 @@
 			no-map;
 		};
 	};
+
+	gpio-keys {
+		compatible = "gpio-keys";
+		autorepeat;
+		pinctrl-names = "default";
+		pinctrl-0 = <&push_button_pins_default>;
+
+		sw5 {
+			label = "GPIO Key USER1";
+			linux,code = <BTN_0>;
+			gpios = <&wkup_gpio0 24 GPIO_ACTIVE_LOW>;
+		};
+
+		sw6 {
+			label = "GPIO Key USER2";
+			linux,code = <BTN_1>;
+			gpios = <&wkup_gpio0 27 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &wkup_pmx0 {
@@ -42,6 +62,13 @@
 			AM65X_WKUP_IOPAD(0x00e4, PIN_INPUT, 0) /* (AD6) WKUP_I2C0_SDA */
 		>;
 	};
+
+	push_button_pins_default: push_button__pins_default {
+		pinctrl-single,pins = <
+			AM65X_WKUP_IOPAD(0x0030, PIN_INPUT, 7) /* (R5) WKUP_GPIO0_24 */
+			AM65X_WKUP_IOPAD(0x003c, PIN_INPUT, 7) /* (P2) WKUP_GPIO0_27 */
+		>;
+	};
 };
 
 &main_pmx0 {
@@ -228,3 +255,27 @@
 		ti,adc-channels = <0 1 2 3 4 5 6 7>;
 	};
 };
+
+&serdes0 {
+	status = "disabled";
+};
+
+&serdes1 {
+	status = "disabled";
+};
+
+&pcie0_rc {
+	status = "disabled";
+};
+
+&pcie0_ep {
+	status = "disabled";
+};
+
+&pcie1_rc {
+	status = "disabled";
+};
+
+&pcie1_ep {
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
new file mode 100644
index 000000000000..c680123f067c
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-common-proc-board.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j721e-som-p0.dtsi"
+
+/ {
+	chosen {
+		stdout-path = "serial2:115200n8";
+		bootargs = "console=ttyS2,115200n8 earlycon=ns16550a,mmio32,0x02800000";
+	};
+};
+
+&wkup_uart0 {
+	/* Wakeup UART is used by System firmware */
+	status = "disabled";
+};
+
+&main_uart3 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart5 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart6 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart7 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart8 {
+	/* UART not brought out */
+	status = "disabled";
+};
+
+&main_uart9 {
+	/* UART not brought out */
+	status = "disabled";
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
new file mode 100644
index 000000000000..a01308142f77
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-main.dtsi
@@ -0,0 +1,243 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721E SoC Family Main Domain peripherals
+ *
+ * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+&cbass_main {
+	msmc_ram: sram@70000000 {
+		compatible = "mmio-sram";
+		reg = <0x0 0x70000000 0x0 0x800000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+		ranges = <0x0 0x0 0x70000000 0x800000>;
+
+		atf-sram@0 {
+			reg = <0x0 0x20000>;
+		};
+	};
+
+	gic500: interrupt-controller@1800000 {
+		compatible = "arm,gic-v3";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+		#interrupt-cells = <3>;
+		interrupt-controller;
+		reg = <0x00 0x01800000 0x00 0x10000>,	/* GICD */
+		      <0x00 0x01900000 0x00 0x100000>;	/* GICR */
+
+		/* vcpumntirq: virtual CPU interface maintenance interrupt */
+		interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>;
+
+		gic_its: gic-its@18200000 {
+			compatible = "arm,gic-v3-its";
+			reg = <0x00 0x01820000 0x00 0x10000>;
+			socionext,synquacer-pre-its = <0x1000000 0x400000>;
+			msi-controller;
+			#msi-cells = <1>;
+		};
+	};
+
+	smmu0: smmu@36600000 {
+		compatible = "arm,smmu-v3";
+		reg = <0x0 0x36600000 0x0 0x100000>;
+		interrupt-parent = <&gic500>;
+		interrupts = <GIC_SPI 772 IRQ_TYPE_EDGE_RISING>,
+			     <GIC_SPI 768 IRQ_TYPE_EDGE_RISING>;
+		interrupt-names = "eventq", "gerror";
+		#iommu-cells = <1>;
+	};
+
+	main_gpio_intr: interrupt-controller0 {
+		compatible = "ti,sci-intr";
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <2>;
+		ti,sci = <&dmsc>;
+		ti,sci-dst-id = <14>;
+		ti,sci-rm-range-girq = <0x1>;
+	};
+
+	cbass_main_navss: interconnect0 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		main_navss_intr: interrupt-controller1 {
+			compatible = "ti,sci-intr";
+			ti,intr-trigger-type = <4>;
+			interrupt-controller;
+			interrupt-parent = <&gic500>;
+			#interrupt-cells = <2>;
+			ti,sci = <&dmsc>;
+			ti,sci-dst-id = <14>;
+			ti,sci-rm-range-girq = <0>, <2>;
+		};
+
+		main_udmass_inta: interrupt-controller@33d00000 {
+			compatible = "ti,sci-inta";
+			reg = <0x0 0x33d00000 0x0 0x100000>;
+			interrupt-controller;
+			interrupt-parent = <&main_navss_intr>;
+			msi-controller;
+			ti,sci = <&dmsc>;
+			ti,sci-dev-id = <209>;
+			ti,sci-rm-range-vint = <0xa>;
+			ti,sci-rm-range-global-event = <0xd>;
+		};
+	};
+
+	secure_proxy_main: mailbox@32c00000 {
+		compatible = "ti,am654-secure-proxy";
+		#mbox-cells = <1>;
+		reg-names = "target_data", "rt", "scfg";
+		reg = <0x00 0x32c00000 0x00 0x100000>,
+		      <0x00 0x32400000 0x00 0x100000>,
+		      <0x00 0x32800000 0x00 0x100000>;
+		interrupt-names = "rx_011";
+		interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	main_pmx0: pinmux@11c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x0 0x11c000 0x0 0x2b4>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	main_uart0: serial@2800000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02800000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 192 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 146>;
+		clocks = <&k3_clks 146 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart1: serial@2810000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02810000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 193 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 278>;
+		clocks = <&k3_clks 278 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart2: serial@2820000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02820000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 194 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 279>;
+		clocks = <&k3_clks 279 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart3: serial@2830000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02830000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 195 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 280>;
+		clocks = <&k3_clks 280 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart4: serial@2840000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02840000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 196 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 281>;
+		clocks = <&k3_clks 281 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart5: serial@2850000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02850000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 197 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 282>;
+		clocks = <&k3_clks 282 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart6: serial@2860000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02860000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 198 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 283>;
+		clocks = <&k3_clks 283 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart7: serial@2870000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02870000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 199 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 284>;
+		clocks = <&k3_clks 284 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart8: serial@2880000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02880000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 285>;
+		clocks = <&k3_clks 285 0>;
+		clock-names = "fclk";
+	};
+
+	main_uart9: serial@2890000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x02890000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 286>;
+		clocks = <&k3_clks 286 0>;
+		clock-names = "fclk";
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
new file mode 100644
index 000000000000..07b58eeebceb
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-mcu-wakeup.dtsi
@@ -0,0 +1,90 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721E SoC Family MCU/WAKEUP Domain peripherals
+ *
+ * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+&cbass_mcu_wakeup {
+	dmsc: dmsc@44083000 {
+		compatible = "ti,k2g-sci";
+		ti,host-id = <12>;
+
+		mbox-names = "rx", "tx";
+
+		mboxes= <&secure_proxy_main 11>,
+			<&secure_proxy_main 13>;
+
+		reg-names = "debug_messages";
+		reg = <0x00 0x44083000 0x0 0x1000>;
+
+		k3_pds: power-controller {
+			compatible = "ti,sci-pm-domain";
+			#power-domain-cells = <1>;
+		};
+
+		k3_clks: clocks {
+			compatible = "ti,k2g-sci-clk";
+			#clock-cells = <2>;
+		};
+
+		k3_reset: reset-controller {
+			compatible = "ti,sci-reset";
+			#reset-cells = <2>;
+		};
+	};
+
+	wkup_pmx0: pinmux@4301c000 {
+		compatible = "pinctrl-single";
+		/* Proxy 0 addressing */
+		reg = <0x00 0x4301c000 0x00 0x178>;
+		#pinctrl-cells = <1>;
+		pinctrl-single,register-width = <32>;
+		pinctrl-single,function-mask = <0xffffffff>;
+	};
+
+	mcu_ram: sram@41c00000 {
+		compatible = "mmio-sram";
+		reg = <0x00 0x41c00000 0x00 0x100000>;
+		ranges = <0x0 0x00 0x41c00000 0x100000>;
+		#address-cells = <1>;
+		#size-cells = <1>;
+	};
+
+	wkup_uart0: serial@42300000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x42300000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 897 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <48000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 287>;
+		clocks = <&k3_clks 287 0>;
+		clock-names = "fclk";
+	};
+
+	mcu_uart0: serial@40a00000 {
+		compatible = "ti,j721e-uart", "ti,am654-uart";
+		reg = <0x00 0x40a00000 0x00 0x100>;
+		reg-shift = <2>;
+		reg-io-width = <4>;
+		interrupts = <GIC_SPI 846 IRQ_TYPE_LEVEL_HIGH>;
+		clock-frequency = <96000000>;
+		current-speed = <115200>;
+		power-domains = <&k3_pds 149>;
+		clocks = <&k3_clks 149 0>;
+		clock-names = "fclk";
+	};
+
+	wkup_gpio_intr: interrupt-controller2 {
+		compatible = "ti,sci-intr";
+		ti,intr-trigger-type = <1>;
+		interrupt-controller;
+		interrupt-parent = <&gic500>;
+		#interrupt-cells = <2>;
+		ti,sci = <&dmsc>;
+		ti,sci-dst-id = <14>;
+		ti,sci-rm-range-girq = <0x5>;
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
new file mode 100644
index 000000000000..1884fc70148f
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e-som-p0.dtsi
@@ -0,0 +1,29 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+/dts-v1/;
+
+#include "k3-j721e.dtsi"
+
+/ {
+	memory@80000000 {
+		device_type = "memory";
+		/* 4G RAM */
+		reg = <0x00000000 0x80000000 0x00000000 0x80000000>,
+		      <0x00000008 0x80000000 0x00000000 0x80000000>;
+	};
+
+	reserved_memory: reserved-memory {
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges;
+
+		secure_ddr: optee@9e800000 {
+			reg = <0x00 0x9e800000 0x00 0x01800000>;
+			alignment = <0x1000>;
+			no-map;
+		};
+	};
+};
diff --git a/arch/arm64/boot/dts/ti/k3-j721e.dtsi b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
new file mode 100644
index 000000000000..f8dd74b17bfb
--- /dev/null
+++ b/arch/arm64/boot/dts/ti/k3-j721e.dtsi
@@ -0,0 +1,177 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for J721E SoC Family
+ *
+ * Copyright (C) 2016-2019 Texas Instruments Incorporated - http://www.ti.com/
+ */
+
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/pinctrl/k3.h>
+
+/ {
+	model = "Texas Instruments K3 J721E SoC";
+	compatible = "ti,j721e";
+	interrupt-parent = <&gic500>;
+	#address-cells = <2>;
+	#size-cells = <2>;
+
+	aliases {
+		serial0 = &wkup_uart0;
+		serial1 = &mcu_uart0;
+		serial2 = &main_uart0;
+		serial3 = &main_uart1;
+		serial4 = &main_uart2;
+		serial5 = &main_uart3;
+		serial6 = &main_uart4;
+		serial7 = &main_uart5;
+		serial8 = &main_uart6;
+		serial9 = &main_uart7;
+		serial10 = &main_uart8;
+		serial11 = &main_uart9;
+	};
+
+	chosen { };
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		cpu-map {
+			cluster0: cluster0 {
+				core0 {
+					cpu = <&cpu0>;
+				};
+
+				core1 {
+					cpu = <&cpu1>;
+				};
+			};
+
+		};
+
+		cpu0: cpu@0 {
+			compatible = "arm,cortex-a72";
+			reg = <0x000>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+
+		cpu1: cpu@1 {
+			compatible = "arm,cortex-a72";
+			reg = <0x001>;
+			device_type = "cpu";
+			enable-method = "psci";
+			i-cache-size = <0xC000>;
+			i-cache-line-size = <64>;
+			i-cache-sets = <256>;
+			d-cache-size = <0x8000>;
+			d-cache-line-size = <64>;
+			d-cache-sets = <128>;
+			next-level-cache = <&L2_0>;
+		};
+	};
+
+	L2_0: l2-cache0 {
+		compatible = "cache";
+		cache-level = <2>;
+		cache-size = <0x100000>;
+		cache-line-size = <64>;
+		cache-sets = <2048>;
+		next-level-cache = <&msmc_l3>;
+	};
+
+	msmc_l3: l3-cache0 {
+		compatible = "cache";
+		cache-level = <3>;
+	};
+
+	firmware {
+		optee {
+			compatible = "linaro,optee-tz";
+			method = "smc";
+		};
+
+		psci: psci {
+			compatible = "arm,psci-1.0";
+			method = "smc";
+		};
+	};
+
+	a72_timer0: timer-cl0-cpu0 {
+		compatible = "arm,armv8-timer";
+		interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, /* cntpsirq */
+			     <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, /* cntpnsirq */
+			     <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, /* cntvirq */
+			     <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; /* cnthpirq */
+	};
+
+	pmu: pmu {
+		compatible = "arm,armv8-pmuv3";
+		/* Recommendation from GIC500 TRM Table A.3 */
+		interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>;
+	};
+
+	cbass_main: interconnect@100000 {
+		compatible = "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <2>;
+		ranges = <0x00 0x00100000 0x00 0x00100000 0x00 0x00020000>, /* ctrl mmr */
+			 <0x00 0x00600000 0x00 0x00600000 0x00 0x00031100>, /* GPIO */
+			 <0x00 0x00900000 0x00 0x00900000 0x00 0x00012000>, /* serdes */
+			 <0x00 0x00A40000 0x00 0x00A40000 0x00 0x00000800>, /* timesync router */
+			 <0x00 0x01000000 0x00 0x01000000 0x00 0x0af02400>, /* Most peripherals */
+			 <0x00 0x30800000 0x00 0x30800000 0x00 0x0bc00000>, /* MAIN NAVSS */
+			 <0x00 0x0d000000 0x00 0x0d000000 0x00 0x01000000>, /* PCIe Core*/
+			 <0x00 0x10000000 0x00 0x10000000 0x00 0x10000000>, /* PCIe DAT */
+			 <0x00 0x64800000 0x00 0x64800000 0x00 0x00800000>, /* C71 */
+			 <0x4d 0x80800000 0x4d 0x80800000 0x00 0x00800000>, /* C66_0 */
+			 <0x4d 0x81800000 0x4d 0x81800000 0x00 0x00800000>, /* C66_1 */
+			 <0x4e 0x20000000 0x4e 0x20000000 0x00 0x00080000>, /* GPU */
+			 <0x00 0x70000000 0x00 0x70000000 0x00 0x00800000>, /* MSMC RAM */
+
+			 /* MCUSS_WKUP Range */
+			 <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>,
+			 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>,
+			 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>,
+			 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>,
+			 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>,
+			 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>,
+			 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>,
+			 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>,
+			 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>,
+			 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>,
+			 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>,
+			 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>,
+			 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>;
+
+		cbass_mcu_wakeup: interconnect@28380000 {
+			compatible = "simple-bus";
+			#address-cells = <2>;
+			#size-cells = <2>;
+			ranges = <0x00 0x28380000 0x00 0x28380000 0x00 0x03880000>, /* MCU NAVSS*/
+				 <0x00 0x40200000 0x00 0x40200000 0x00 0x00998400>, /* First peripheral window */
+				 <0x00 0x40f00000 0x00 0x40f00000 0x00 0x00020000>, /* CTRL_MMR0 */
+				 <0x00 0x41000000 0x00 0x41000000 0x00 0x00020000>, /* MCU R5F Core0 */
+				 <0x00 0x41400000 0x00 0x41400000 0x00 0x00020000>, /* MCU R5F Core1 */
+				 <0x00 0x41c00000 0x00 0x41c00000 0x00 0x00100000>, /* MCU SRAM */
+				 <0x00 0x42040000 0x00 0x42040000 0x00 0x03ac2400>, /* WKUP peripheral window */
+				 <0x00 0x45100000 0x00 0x45100000 0x00 0x00c24000>, /* MMRs, remaining NAVSS */
+				 <0x00 0x46000000 0x00 0x46000000 0x00 0x00200000>, /* CPSW */
+				 <0x00 0x47000000 0x00 0x47000000 0x00 0x00068400>, /* OSPI register space */
+				 <0x00 0x50000000 0x00 0x50000000 0x00 0x10000000>, /* FSS OSPI0/1 data region 0 */
+				 <0x05 0x00000000 0x05 0x00000000 0x01 0x00000000>, /* FSS OSPI0 data region 3 */
+				 <0x07 0x00000000 0x07 0x00000000 0x01 0x00000000>; /* FSS OSPI1 data region 3*/
+		};
+	};
+};
+
+/* Now include the peripherals for each bus segments */
+#include "k3-j721e-main.dtsi"
+#include "k3-j721e-mcu-wakeup.dtsi"
diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig
index 4d583514258c..83a509dc247d 100644
--- a/arch/arm64/configs/defconfig
+++ b/arch/arm64/configs/defconfig
@@ -696,6 +696,7 @@ CONFIG_ARCH_TEGRA_210_SOC=y
 CONFIG_ARCH_TEGRA_186_SOC=y
 CONFIG_ARCH_TEGRA_194_SOC=y
 CONFIG_ARCH_K3_AM6_SOC=y
+CONFIG_ARCH_K3_J721E_SOC=y
 CONFIG_SOC_TI=y
 CONFIG_TI_SCI_PM_DOMAINS=y
 CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y
diff --git a/drivers/soc/ti/Kconfig b/drivers/soc/ti/Kconfig
index ea0859f7b185..f0be35d3dcba 100644
--- a/drivers/soc/ti/Kconfig
+++ b/drivers/soc/ti/Kconfig
@@ -9,6 +9,11 @@ config ARCH_K3_AM6_SOC
 	help
 	  Enable support for TI's AM6 SoC Family support
 
+config ARCH_K3_J721E_SOC
+	bool "K3 J721E SoC"
+	help
+	  Enable support for TI's J721E SoC Family support
+
 endif
 
 endif