Merge branch 'net-dsa-bcm_sf2-utilize-phylink-for-all-ports'

Florian Fainelli says:

====================
net: dsa: bcm_sf2: Utilize PHYLINK for all ports

This patch series has the bcm_sf2 driver utilize PHYLINK to configure
the CPU port link parameters to unify the configuration and pave the way
for DSA to utilize PHYLINK for all ports in the future.

Tested on BCM7445 and BCM7278
====================

Link: https://lore.kernel.org/r/20220815175009.2681932-1-f.fainelli@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>

1 files changed, 63 insertions, 67 deletions

diff --git a/drivers/net/dsa/bcm_sf2.c b/drivers/net/dsa/bcm_sf2.c
index be0edfa093d0..572f7450b527 100644
--- a/drivers/net/dsa/bcm_sf2.c
+++ b/drivers/net/dsa/bcm_sf2.c
@@ -94,6 +94,24 @@ static u16 bcm_sf2_reg_led_base(struct bcm_sf2_priv *priv, int port)
 	return REG_SWITCH_STATUS;
 }
 
+static u32 bcm_sf2_port_override_offset(struct bcm_sf2_priv *priv, int port)
+{
+	switch (priv->type) {
+	case BCM4908_DEVICE_ID:
+	case BCM7445_DEVICE_ID:
+		return port == 8 ? CORE_STS_OVERRIDE_IMP :
+				   CORE_STS_OVERRIDE_GMIIP_PORT(port);
+	case BCM7278_DEVICE_ID:
+		return port == 8 ? CORE_STS_OVERRIDE_IMP2 :
+				   CORE_STS_OVERRIDE_GMIIP2_PORT(port);
+	default:
+		WARN_ONCE(1, "Unsupported device: %d\n", priv->type);
+	}
+
+	/* RO fallback register */
+	return REG_SWITCH_STATUS;
+}
+
 /* Return the number of active ports, not counting the IMP (CPU) port */
 static unsigned int bcm_sf2_num_active_ports(struct dsa_switch *ds)
 {
@@ -141,7 +159,7 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
 {
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
 	unsigned int i;
-	u32 reg, offset;
+	u32 reg;
 
 	/* Enable the port memories */
 	reg = core_readl(priv, CORE_MEM_PSM_VDD_CTRL);
@@ -167,21 +185,6 @@ static void bcm_sf2_imp_setup(struct dsa_switch *ds, int port)
 	b53_brcm_hdr_setup(ds, port);
 
 	if (port == 8) {
-		if (priv->type == BCM4908_DEVICE_ID ||
-		    priv->type == BCM7445_DEVICE_ID)
-			offset = CORE_STS_OVERRIDE_IMP;
-		else
-			offset = CORE_STS_OVERRIDE_IMP2;
-
-		/* Force link status for IMP port */
-		reg = core_readl(priv, offset);
-		reg |= (MII_SW_OR | LINK_STS);
-		if (priv->type == BCM4908_DEVICE_ID)
-			reg |= GMII_SPEED_UP_2G;
-		else
-			reg &= ~GMII_SPEED_UP_2G;
-		core_writel(priv, reg, offset);
-
 		/* Enable Broadcast, Multicast, Unicast forwarding to IMP port */
 		reg = core_readl(priv, CORE_IMP_CTL);
 		reg |= (RX_BCST_EN | RX_MCST_EN | RX_UCST_EN);
@@ -812,17 +815,10 @@ static void bcm_sf2_sw_mac_link_down(struct dsa_switch *ds, int port,
 	if (priv->wol_ports_mask & BIT(port))
 		return;
 
-	if (port != core_readl(priv, CORE_IMP0_PRT_ID)) {
-		if (priv->type == BCM4908_DEVICE_ID ||
-		    priv->type == BCM7445_DEVICE_ID)
-			offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
-		else
-			offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
-
-		reg = core_readl(priv, offset);
-		reg &= ~LINK_STS;
-		core_writel(priv, reg, offset);
-	}
+	offset = bcm_sf2_port_override_offset(priv, port);
+	reg = core_readl(priv, offset);
+	reg &= ~LINK_STS;
+	core_writel(priv, reg, offset);
 
 	bcm_sf2_sw_mac_link_set(ds, port, interface, false);
 }
@@ -836,56 +832,56 @@ static void bcm_sf2_sw_mac_link_up(struct dsa_switch *ds, int port,
 {
 	struct bcm_sf2_priv *priv = bcm_sf2_to_priv(ds);
 	struct ethtool_eee *p = &priv->dev->ports[port].eee;
+	u32 reg_rgmii_ctrl = 0;
+	u32 reg, offset;
 
 	bcm_sf2_sw_mac_link_set(ds, port, interface, true);
 
-	if (port != core_readl(priv, CORE_IMP0_PRT_ID)) {
-		u32 reg_rgmii_ctrl = 0;
-		u32 reg, offset;
+	offset = bcm_sf2_port_override_offset(priv, port);
 
-		if (priv->type == BCM4908_DEVICE_ID ||
-		    priv->type == BCM7445_DEVICE_ID)
-			offset = CORE_STS_OVERRIDE_GMIIP_PORT(port);
-		else
-			offset = CORE_STS_OVERRIDE_GMIIP2_PORT(port);
-
-		if (interface == PHY_INTERFACE_MODE_RGMII ||
-		    interface == PHY_INTERFACE_MODE_RGMII_TXID ||
-		    interface == PHY_INTERFACE_MODE_MII ||
-		    interface == PHY_INTERFACE_MODE_REVMII) {
-			reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
-			reg = reg_readl(priv, reg_rgmii_ctrl);
-			reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
-
-			if (tx_pause)
-				reg |= TX_PAUSE_EN;
-			if (rx_pause)
-				reg |= RX_PAUSE_EN;
-
-			reg_writel(priv, reg, reg_rgmii_ctrl);
-		}
-
-		reg = SW_OVERRIDE | LINK_STS;
-		switch (speed) {
-		case SPEED_1000:
-			reg |= SPDSTS_1000 << SPEED_SHIFT;
-			break;
-		case SPEED_100:
-			reg |= SPDSTS_100 << SPEED_SHIFT;
-			break;
-		}
-
-		if (duplex == DUPLEX_FULL)
-			reg |= DUPLX_MODE;
+	if (phy_interface_mode_is_rgmii(interface) ||
+	    interface == PHY_INTERFACE_MODE_MII ||
+	    interface == PHY_INTERFACE_MODE_REVMII) {
+		reg_rgmii_ctrl = bcm_sf2_reg_rgmii_cntrl(priv, port);
+		reg = reg_readl(priv, reg_rgmii_ctrl);
+		reg &= ~(RX_PAUSE_EN | TX_PAUSE_EN);
 
 		if (tx_pause)
-			reg |= TXFLOW_CNTL;
+			reg |= TX_PAUSE_EN;
 		if (rx_pause)
-			reg |= RXFLOW_CNTL;
+			reg |= RX_PAUSE_EN;
+
+		reg_writel(priv, reg, reg_rgmii_ctrl);
+	}
+
+	reg = LINK_STS;
+	if (port == 8) {
+		if (priv->type == BCM4908_DEVICE_ID)
+			reg |= GMII_SPEED_UP_2G;
+		reg |= MII_SW_OR;
+	} else {
+		reg |= SW_OVERRIDE;
+	}
 
-		core_writel(priv, reg, offset);
+	switch (speed) {
+	case SPEED_1000:
+		reg |= SPDSTS_1000 << SPEED_SHIFT;
+		break;
+	case SPEED_100:
+		reg |= SPDSTS_100 << SPEED_SHIFT;
+		break;
 	}
 
+	if (duplex == DUPLEX_FULL)
+		reg |= DUPLX_MODE;
+
+	if (tx_pause)
+		reg |= TXFLOW_CNTL;
+	if (rx_pause)
+		reg |= RXFLOW_CNTL;
+
+	core_writel(priv, reg, offset);
+
 	if (mode == MLO_AN_PHY && phydev)
 		p->eee_enabled = b53_eee_init(ds, port, phydev);
 }