Merge tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC late fixes and dependencies from Kevin Hilman:
 "This is a collection of a few late fixes and other misc stuff that had
  dependencies on things being merged from other trees.

  Other than the fixes, the primary feature being added is the
  conversion of some OMAP drivers to the new generic wakeirq interface"

* tag 'armsoc-late' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: multi_v7_defconfig: Enable BRCMNAND driver
  ARM: BCM: Do not select CONFIG_MTD_NAND_BRCMNAND
  ARM: at91/dt: update udc compatible strings
  ARM: at91/dt: trivial: fix USB udc compatible string
  arm64: dts: Add APM X-Gene standby GPIO controller DTS entries
  soc: qcom: spm: Fix idle on THUMB2 kernels
  ARM: dove: fix legacy dove IRQ numbers
  ARM: mvebu: fix suspend to RAM on big-endian configurations
  ARM: mvebu: adjust Armada XP DT spi muxing after pinctrl function rename
  serial: 8250_omap: Move wake-up interrupt to generic wakeirq
  serial: omap: Switch wake-up interrupt to generic wakeirq
  mmc: omap_hsmmc: Change wake-up interrupt to use generic wakeirq

16 files changed, 103 insertions, 201 deletions

diff --git a/Documentation/devicetree/bindings/usb/atmel-usb.txt b/Documentation/devicetree/bindings/usb/atmel-usb.txt
index 1be8d7a26c15..5883b73ea1b5 100644
--- a/Documentation/devicetree/bindings/usb/atmel-usb.txt
+++ b/Documentation/devicetree/bindings/usb/atmel-usb.txt
@@ -79,9 +79,9 @@ Atmel High-Speed USB device controller
 
 Required properties:
  - compatible: Should be one of the following
-	       "at91sam9rl-udc"
-	       "at91sam9g45-udc"
-	       "sama5d3-udc"
+	       "atmel,at91sam9rl-udc"
+	       "atmel,at91sam9g45-udc"
+	       "atmel,sama5d3-udc"
  - reg: Address and length of the register set for the device
  - interrupts: Should contain usba interrupt
  - clocks: Should reference the peripheral and host clocks
diff --git a/arch/arm/boot/dts/armada-xp.dtsi b/arch/arm/boot/dts/armada-xp.dtsi
index 0854d4493da7..3de9b761cc1a 100644
--- a/arch/arm/boot/dts/armada-xp.dtsi
+++ b/arch/arm/boot/dts/armada-xp.dtsi
@@ -305,7 +305,7 @@
 	spi0_pins: spi0-pins {
 		marvell,pins = "mpp36", "mpp37",
 			       "mpp38", "mpp39";
-		marvell,function = "spi";
+		marvell,function = "spi0";
 	};
 
 	uart2_pins: uart2-pins {
diff --git a/arch/arm/boot/dts/at91sam9g45.dtsi b/arch/arm/boot/dts/at91sam9g45.dtsi
index d260ba779ae5..18177f5a7464 100644
--- a/arch/arm/boot/dts/at91sam9g45.dtsi
+++ b/arch/arm/boot/dts/at91sam9g45.dtsi
@@ -1148,7 +1148,7 @@
 			usb2: gadget@fff78000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "atmel,at91sam9rl-udc";
+				compatible = "atmel,at91sam9g45-udc";
 				reg = <0x00600000 0x80000
 				       0xfff78000 0x400>;
 				interrupts = <27 IRQ_TYPE_LEVEL_HIGH 0>;
diff --git a/arch/arm/boot/dts/at91sam9x5.dtsi b/arch/arm/boot/dts/at91sam9x5.dtsi
index 7521bdf17ef2..b6c8df8d380e 100644
--- a/arch/arm/boot/dts/at91sam9x5.dtsi
+++ b/arch/arm/boot/dts/at91sam9x5.dtsi
@@ -1108,7 +1108,7 @@
 			usb2: gadget@f803c000 {
 				#address-cells = <1>;
 				#size-cells = <0>;
-				compatible = "atmel,at91sam9rl-udc";
+				compatible = "atmel,at91sam9g45-udc";
 				reg = <0x00500000 0x80000
 				       0xf803c000 0x400>;
 				interrupts = <23 IRQ_TYPE_LEVEL_HIGH 0>;
diff --git a/arch/arm/boot/dts/sama5d3.dtsi b/arch/arm/boot/dts/sama5d3.dtsi
index 5ab7548e04e1..9e2444b07bce 100644
--- a/arch/arm/boot/dts/sama5d3.dtsi
+++ b/arch/arm/boot/dts/sama5d3.dtsi
@@ -1321,7 +1321,7 @@
 		usb0: gadget@00500000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "atmel,at91sam9rl-udc";
+			compatible = "atmel,sama5d3-udc";
 			reg = <0x00500000 0x100000
 			       0xf8030000 0x4000>;
 			interrupts = <33 IRQ_TYPE_LEVEL_HIGH 2>;
diff --git a/arch/arm/boot/dts/sama5d4.dtsi b/arch/arm/boot/dts/sama5d4.dtsi
index 653a1f851f2b..3ee22ee13c5a 100644
--- a/arch/arm/boot/dts/sama5d4.dtsi
+++ b/arch/arm/boot/dts/sama5d4.dtsi
@@ -127,7 +127,7 @@
 		usb0: gadget@00400000 {
 			#address-cells = <1>;
 			#size-cells = <0>;
-			compatible = "atmel,at91sam9rl-udc";
+			compatible = "atmel,sama5d3-udc";
 			reg = <0x00400000 0x100000
 			       0xfc02c000 0x4000>;
 			interrupts = <47 IRQ_TYPE_LEVEL_HIGH 2>;
diff --git a/arch/arm/configs/multi_v7_defconfig b/arch/arm/configs/multi_v7_defconfig
index fd6a6d23bc20..6d83a1bf0c74 100644
--- a/arch/arm/configs/multi_v7_defconfig
+++ b/arch/arm/configs/multi_v7_defconfig
@@ -169,6 +169,7 @@ CONFIG_MTD_BLOCK=y
 CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_BRCMNAND=y
 CONFIG_MTD_NAND_DAVINCI=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_UBI=y
diff --git a/arch/arm/mach-bcm/Kconfig b/arch/arm/mach-bcm/Kconfig
index e9184feffc4e..0ac9e4b3b265 100644
--- a/arch/arm/mach-bcm/Kconfig
+++ b/arch/arm/mach-bcm/Kconfig
@@ -19,7 +19,6 @@ config ARCH_BCM_IPROC
 	select ARCH_REQUIRE_GPIOLIB
 	select ARM_AMBA
 	select PINCTRL
-	select MTD_NAND_BRCMNAND
 	help
 	  This enables support for systems based on Broadcom IPROC architected SoCs.
 	  The IPROC complex contains one or more ARM CPUs along with common
diff --git a/arch/arm/mach-dove/include/mach/irqs.h b/arch/arm/mach-dove/include/mach/irqs.h
index 03d401d20453..3f29e6bca058 100644
--- a/arch/arm/mach-dove/include/mach/irqs.h
+++ b/arch/arm/mach-dove/include/mach/irqs.h
@@ -14,73 +14,73 @@
 /*
  * Dove Low Interrupt Controller
  */
-#define IRQ_DOVE_BRIDGE		0
-#define IRQ_DOVE_H2C		1
-#define IRQ_DOVE_C2H		2
-#define IRQ_DOVE_NAND		3
-#define IRQ_DOVE_PDMA		4
-#define IRQ_DOVE_SPI1		5
-#define IRQ_DOVE_SPI0		6
-#define IRQ_DOVE_UART_0		7
-#define IRQ_DOVE_UART_1		8
-#define IRQ_DOVE_UART_2		9
-#define IRQ_DOVE_UART_3		10
-#define IRQ_DOVE_I2C		11
-#define IRQ_DOVE_GPIO_0_7	12
-#define IRQ_DOVE_GPIO_8_15	13
-#define IRQ_DOVE_GPIO_16_23	14
-#define IRQ_DOVE_PCIE0_ERR	15
-#define IRQ_DOVE_PCIE0		16
-#define IRQ_DOVE_PCIE1_ERR	17
-#define IRQ_DOVE_PCIE1		18
-#define IRQ_DOVE_I2S0		19
-#define IRQ_DOVE_I2S0_ERR	20
-#define IRQ_DOVE_I2S1		21
-#define IRQ_DOVE_I2S1_ERR	22
-#define IRQ_DOVE_USB_ERR	23
-#define IRQ_DOVE_USB0		24
-#define IRQ_DOVE_USB1		25
-#define IRQ_DOVE_GE00_RX	26
-#define IRQ_DOVE_GE00_TX	27
-#define IRQ_DOVE_GE00_MISC	28
-#define IRQ_DOVE_GE00_SUM	29
-#define IRQ_DOVE_GE00_ERR	30
-#define IRQ_DOVE_CRYPTO		31
+#define IRQ_DOVE_BRIDGE		(1 + 0)
+#define IRQ_DOVE_H2C		(1 + 1)
+#define IRQ_DOVE_C2H		(1 + 2)
+#define IRQ_DOVE_NAND		(1 + 3)
+#define IRQ_DOVE_PDMA		(1 + 4)
+#define IRQ_DOVE_SPI1		(1 + 5)
+#define IRQ_DOVE_SPI0		(1 + 6)
+#define IRQ_DOVE_UART_0		(1 + 7)
+#define IRQ_DOVE_UART_1		(1 + 8)
+#define IRQ_DOVE_UART_2		(1 + 9)
+#define IRQ_DOVE_UART_3		(1 + 10)
+#define IRQ_DOVE_I2C		(1 + 11)
+#define IRQ_DOVE_GPIO_0_7	(1 + 12)
+#define IRQ_DOVE_GPIO_8_15	(1 + 13)
+#define IRQ_DOVE_GPIO_16_23	(1 + 14)
+#define IRQ_DOVE_PCIE0_ERR	(1 + 15)
+#define IRQ_DOVE_PCIE0		(1 + 16)
+#define IRQ_DOVE_PCIE1_ERR	(1 + 17)
+#define IRQ_DOVE_PCIE1		(1 + 18)
+#define IRQ_DOVE_I2S0		(1 + 19)
+#define IRQ_DOVE_I2S0_ERR	(1 + 20)
+#define IRQ_DOVE_I2S1		(1 + 21)
+#define IRQ_DOVE_I2S1_ERR	(1 + 22)
+#define IRQ_DOVE_USB_ERR	(1 + 23)
+#define IRQ_DOVE_USB0		(1 + 24)
+#define IRQ_DOVE_USB1		(1 + 25)
+#define IRQ_DOVE_GE00_RX	(1 + 26)
+#define IRQ_DOVE_GE00_TX	(1 + 27)
+#define IRQ_DOVE_GE00_MISC	(1 + 28)
+#define IRQ_DOVE_GE00_SUM	(1 + 29)
+#define IRQ_DOVE_GE00_ERR	(1 + 30)
+#define IRQ_DOVE_CRYPTO		(1 + 31)
 
 /*
  * Dove High Interrupt Controller
  */
-#define IRQ_DOVE_AC97		32
-#define IRQ_DOVE_PMU		33
-#define IRQ_DOVE_CAM		34
-#define IRQ_DOVE_SDIO0		35
-#define IRQ_DOVE_SDIO1		36
-#define IRQ_DOVE_SDIO0_WAKEUP	37
-#define IRQ_DOVE_SDIO1_WAKEUP	38
-#define IRQ_DOVE_XOR_00		39
-#define IRQ_DOVE_XOR_01		40
-#define IRQ_DOVE_XOR0_ERR	41
-#define IRQ_DOVE_XOR_10		42
-#define IRQ_DOVE_XOR_11		43
-#define IRQ_DOVE_XOR1_ERR	44
-#define IRQ_DOVE_LCD_DCON	45
-#define IRQ_DOVE_LCD1		46
-#define IRQ_DOVE_LCD0		47
-#define IRQ_DOVE_GPU		48
-#define IRQ_DOVE_PERFORM_MNTR	49
-#define IRQ_DOVE_VPRO_DMA1	51
-#define IRQ_DOVE_SSP_TIMER	54
-#define IRQ_DOVE_SSP		55
-#define IRQ_DOVE_MC_L2_ERR	56
-#define IRQ_DOVE_CRYPTO_ERR	59
-#define IRQ_DOVE_GPIO_24_31	60
-#define IRQ_DOVE_HIGH_GPIO	61
-#define IRQ_DOVE_SATA		62
+#define IRQ_DOVE_AC97		(1 + 32)
+#define IRQ_DOVE_PMU		(1 + 33)
+#define IRQ_DOVE_CAM		(1 + 34)
+#define IRQ_DOVE_SDIO0		(1 + 35)
+#define IRQ_DOVE_SDIO1		(1 + 36)
+#define IRQ_DOVE_SDIO0_WAKEUP	(1 + 37)
+#define IRQ_DOVE_SDIO1_WAKEUP	(1 + 38)
+#define IRQ_DOVE_XOR_00		(1 + 39)
+#define IRQ_DOVE_XOR_01		(1 + 40)
+#define IRQ_DOVE_XOR0_ERR	(1 + 41)
+#define IRQ_DOVE_XOR_10		(1 + 42)
+#define IRQ_DOVE_XOR_11		(1 + 43)
+#define IRQ_DOVE_XOR1_ERR	(1 + 44)
+#define IRQ_DOVE_LCD_DCON	(1 + 45)
+#define IRQ_DOVE_LCD1		(1 + 46)
+#define IRQ_DOVE_LCD0		(1 + 47)
+#define IRQ_DOVE_GPU		(1 + 48)
+#define IRQ_DOVE_PERFORM_MNTR	(1 + 49)
+#define IRQ_DOVE_VPRO_DMA1	(1 + 51)
+#define IRQ_DOVE_SSP_TIMER	(1 + 54)
+#define IRQ_DOVE_SSP		(1 + 55)
+#define IRQ_DOVE_MC_L2_ERR	(1 + 56)
+#define IRQ_DOVE_CRYPTO_ERR	(1 + 59)
+#define IRQ_DOVE_GPIO_24_31	(1 + 60)
+#define IRQ_DOVE_HIGH_GPIO	(1 + 61)
+#define IRQ_DOVE_SATA		(1 + 62)
 
 /*
  * DOVE General Purpose Pins
  */
-#define IRQ_DOVE_GPIO_START	64
+#define IRQ_DOVE_GPIO_START	65
 #define NR_GPIO_IRQS		64
 
 /*
diff --git a/arch/arm/mach-dove/irq.c b/arch/arm/mach-dove/irq.c
index 4a5a7aedcb76..df0223f76fa9 100644
--- a/arch/arm/mach-dove/irq.c
+++ b/arch/arm/mach-dove/irq.c
@@ -126,14 +126,14 @@ __exception_irq_entry dove_legacy_handle_irq(struct pt_regs *regs)
 	stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_LOW_OFF);
 	stat &= readl_relaxed(dove_irq_base + IRQ_MASK_LOW_OFF);
 	if (stat) {
-		unsigned int hwirq = __fls(stat);
+		unsigned int hwirq = 1 + __fls(stat);
 		handle_IRQ(hwirq, regs);
 		return;
 	}
 	stat = readl_relaxed(dove_irq_base + IRQ_CAUSE_HIGH_OFF);
 	stat &= readl_relaxed(dove_irq_base + IRQ_MASK_HIGH_OFF);
 	if (stat) {
-		unsigned int hwirq = 32 + __fls(stat);
+		unsigned int hwirq = 33 + __fls(stat);
 		handle_IRQ(hwirq, regs);
 		return;
 	}
@@ -144,8 +144,8 @@ void __init dove_init_irq(void)
 {
 	int i;
 
-	orion_irq_init(0, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
-	orion_irq_init(32, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
+	orion_irq_init(1, IRQ_VIRT_BASE + IRQ_MASK_LOW_OFF);
+	orion_irq_init(33, IRQ_VIRT_BASE + IRQ_MASK_HIGH_OFF);
 
 #ifdef CONFIG_MULTI_IRQ_HANDLER
 	set_handle_irq(dove_legacy_handle_irq);
diff --git a/arch/arm/mach-mvebu/pm-board.c b/arch/arm/mach-mvebu/pm-board.c
index 6dfd4ab97b2a..301ab38d38ba 100644
--- a/arch/arm/mach-mvebu/pm-board.c
+++ b/arch/arm/mach-mvebu/pm-board.c
@@ -43,6 +43,9 @@ static void mvebu_armada_xp_gp_pm_enter(void __iomem *sdram_reg, u32 srcmd)
 	for (i = 0; i < ARMADA_XP_GP_PIC_NR_GPIOS; i++)
 		ackcmd |= BIT(pic_raw_gpios[i]);
 
+	srcmd = cpu_to_le32(srcmd);
+	ackcmd = cpu_to_le32(ackcmd);
+
 	/*
 	 * Wait a while, the PIC needs quite a bit of time between the
 	 * two GPIO commands.
diff --git a/arch/arm64/boot/dts/apm/apm-storm.dtsi b/arch/arm64/boot/dts/apm/apm-storm.dtsi
index 0bb287ca0a98..0689c3fb56e3 100644
--- a/arch/arm64/boot/dts/apm/apm-storm.dtsi
+++ b/arch/arm64/boot/dts/apm/apm-storm.dtsi
@@ -717,6 +717,19 @@
 			phy-names = "sata-phy";
 		};
 
+		sbgpio: sbgpio@17001000{
+			compatible = "apm,xgene-gpio-sb";
+			reg = <0x0 0x17001000 0x0 0x400>;
+			#gpio-cells = <2>;
+			gpio-controller;
+			interrupts = 	<0x0 0x28 0x1>,
+					<0x0 0x29 0x1>,
+					<0x0 0x2a 0x1>,
+					<0x0 0x2b 0x1>,
+					<0x0 0x2c 0x1>,
+					<0x0 0x2d 0x1>;
+		};
+
 		rtc: rtc@10510000 {
 			compatible = "apm,xgene-rtc";
 			reg = <0x0 0x10510000 0x0 0x400>;
diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c
index 9df2b6801f76..b2b411da297b 100644
--- a/drivers/mmc/host/omap_hsmmc.c
+++ b/drivers/mmc/host/omap_hsmmc.c
@@ -43,6 +43,7 @@
 #include <linux/regulator/consumer.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/pm_runtime.h>
+#include <linux/pm_wakeirq.h>
 #include <linux/platform_data/hsmmc-omap.h>
 
 /* OMAP HSMMC Host Controller Registers */
@@ -218,7 +219,6 @@ struct omap_hsmmc_host {
 	unsigned int		flags;
 #define AUTO_CMD23		(1 << 0)        /* Auto CMD23 support */
 #define HSMMC_SDIO_IRQ_ENABLED	(1 << 1)        /* SDIO irq enabled */
-#define HSMMC_WAKE_IRQ_ENABLED	(1 << 2)
 	struct omap_hsmmc_next	next_data;
 	struct	omap_hsmmc_platform_data	*pdata;
 
@@ -1117,22 +1117,6 @@ static irqreturn_t omap_hsmmc_irq(int irq, void *dev_id)
 	return IRQ_HANDLED;
 }
 
-static irqreturn_t omap_hsmmc_wake_irq(int irq, void *dev_id)
-{
-	struct omap_hsmmc_host *host = dev_id;
-
-	/* cirq is level triggered, disable to avoid infinite loop */
-	spin_lock(&host->irq_lock);
-	if (host->flags & HSMMC_WAKE_IRQ_ENABLED) {
-		disable_irq_nosync(host->wake_irq);
-		host->flags &= ~HSMMC_WAKE_IRQ_ENABLED;
-	}
-	spin_unlock(&host->irq_lock);
-	pm_request_resume(host->dev); /* no use counter */
-
-	return IRQ_HANDLED;
-}
-
 static void set_sd_bus_power(struct omap_hsmmc_host *host)
 {
 	unsigned long i;
@@ -1665,7 +1649,6 @@ static void omap_hsmmc_enable_sdio_irq(struct mmc_host *mmc, int enable)
 
 static int omap_hsmmc_configure_wake_irq(struct omap_hsmmc_host *host)
 {
-	struct mmc_host *mmc = host->mmc;
 	int ret;
 
 	/*
@@ -1677,11 +1660,7 @@ static int omap_hsmmc_configure_wake_irq(struct omap_hsmmc_host *host)
 	if (!host->dev->of_node || !host->wake_irq)
 		return -ENODEV;
 
-	/* Prevent auto-enabling of IRQ */
-	irq_set_status_flags(host->wake_irq, IRQ_NOAUTOEN);
-	ret = devm_request_irq(host->dev, host->wake_irq, omap_hsmmc_wake_irq,
-			       IRQF_TRIGGER_LOW | IRQF_ONESHOT,
-			       mmc_hostname(mmc), host);
+	ret = dev_pm_set_dedicated_wake_irq(host->dev, host->wake_irq);
 	if (ret) {
 		dev_err(mmc_dev(host->mmc), "Unable to request wake IRQ\n");
 		goto err;
@@ -1718,7 +1697,7 @@ static int omap_hsmmc_configure_wake_irq(struct omap_hsmmc_host *host)
 	return 0;
 
 err_free_irq:
-	devm_free_irq(host->dev, host->wake_irq, host);
+	dev_pm_clear_wake_irq(host->dev);
 err:
 	dev_warn(host->dev, "no SDIO IRQ support, falling back to polling\n");
 	host->wake_irq = 0;
@@ -2007,6 +1986,7 @@ static int omap_hsmmc_probe(struct platform_device *pdev)
 		omap_hsmmc_ops.multi_io_quirk = omap_hsmmc_multi_io_quirk;
 	}
 
+	device_init_wakeup(&pdev->dev, true);
 	pm_runtime_enable(host->dev);
 	pm_runtime_get_sync(host->dev);
 	pm_runtime_set_autosuspend_delay(host->dev, MMC_AUTOSUSPEND_DELAY);
@@ -2147,6 +2127,7 @@ err_slot_name:
 	if (host->use_reg)
 		omap_hsmmc_reg_put(host);
 err_irq:
+	device_init_wakeup(&pdev->dev, false);
 	if (host->tx_chan)
 		dma_release_channel(host->tx_chan);
 	if (host->rx_chan)
@@ -2178,6 +2159,7 @@ static int omap_hsmmc_remove(struct platform_device *pdev)
 
 	pm_runtime_put_sync(host->dev);
 	pm_runtime_disable(host->dev);
+	device_init_wakeup(&pdev->dev, false);
 	if (host->dbclk)
 		clk_disable_unprepare(host->dbclk);
 
@@ -2204,11 +2186,6 @@ static int omap_hsmmc_suspend(struct device *dev)
 				OMAP_HSMMC_READ(host->base, HCTL) & ~SDBP);
 	}
 
-	/* do not wake up due to sdio irq */
-	if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) &&
-	    !(host->mmc->pm_flags & MMC_PM_WAKE_SDIO_IRQ))
-		disable_irq(host->wake_irq);
-
 	if (host->dbclk)
 		clk_disable_unprepare(host->dbclk);
 
@@ -2233,11 +2210,6 @@ static int omap_hsmmc_resume(struct device *dev)
 		omap_hsmmc_conf_bus_power(host);
 
 	omap_hsmmc_protect_card(host);
-
-	if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) &&
-	    !(host->mmc->pm_flags & MMC_PM_WAKE_SDIO_IRQ))
-		enable_irq(host->wake_irq);
-
 	pm_runtime_mark_last_busy(host->dev);
 	pm_runtime_put_autosuspend(host->dev);
 	return 0;
@@ -2277,10 +2249,6 @@ static int omap_hsmmc_runtime_suspend(struct device *dev)
 		}
 
 		pinctrl_pm_select_idle_state(dev);
-
-		WARN_ON(host->flags & HSMMC_WAKE_IRQ_ENABLED);
-		enable_irq(host->wake_irq);
-		host->flags |= HSMMC_WAKE_IRQ_ENABLED;
 	} else {
 		pinctrl_pm_select_idle_state(dev);
 	}
@@ -2302,11 +2270,6 @@ static int omap_hsmmc_runtime_resume(struct device *dev)
 	spin_lock_irqsave(&host->irq_lock, flags);
 	if ((host->mmc->caps & MMC_CAP_SDIO_IRQ) &&
 	    (host->flags & HSMMC_SDIO_IRQ_ENABLED)) {
-		/* sdio irq flag can't change while in runtime suspend */
-		if (host->flags & HSMMC_WAKE_IRQ_ENABLED) {
-			disable_irq_nosync(host->wake_irq);
-			host->flags &= ~HSMMC_WAKE_IRQ_ENABLED;
-		}
 
 		pinctrl_pm_select_default_state(host->dev);
 
diff --git a/drivers/soc/qcom/spm.c b/drivers/soc/qcom/spm.c
index b562af816c0a..b04b05a0904e 100644
--- a/drivers/soc/qcom/spm.c
+++ b/drivers/soc/qcom/spm.c
@@ -260,7 +260,7 @@ static int __init qcom_cpuidle_init(struct device_node *cpu_node, int cpu)
 		/* We have atleast one power down mode */
 		cpumask_clear(&mask);
 		cpumask_set_cpu(cpu, &mask);
-		qcom_scm_set_warm_boot_addr(cpu_resume, &mask);
+		qcom_scm_set_warm_boot_addr(cpu_resume_arm, &mask);
 	}
 
 	per_cpu(qcom_idle_ops, cpu) = fns;
diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c
index 978204333c94..d75a66c72750 100644
--- a/drivers/tty/serial/8250/8250_omap.c
+++ b/drivers/tty/serial/8250/8250_omap.c
@@ -22,6 +22,7 @@
 #include <linux/pm_runtime.h>
 #include <linux/console.h>
 #include <linux/pm_qos.h>
+#include <linux/pm_wakeirq.h>
 #include <linux/dma-mapping.h>
 
 #include "8250.h"
@@ -552,17 +553,6 @@ static void omap8250_uart_qos_work(struct work_struct *work)
 	pm_qos_update_request(&priv->pm_qos_request, priv->latency);
 }
 
-static irqreturn_t omap_wake_irq(int irq, void *dev_id)
-{
-	struct uart_port *port = dev_id;
-	int ret;
-
-	ret = port->handle_irq(port);
-	if (ret)
-		return IRQ_HANDLED;
-	return IRQ_NONE;
-}
-
 #ifdef CONFIG_SERIAL_8250_DMA
 static int omap_8250_dma_handle_irq(struct uart_port *port);
 #endif
@@ -596,11 +586,9 @@ static int omap_8250_startup(struct uart_port *port)
 	int ret;
 
 	if (priv->wakeirq) {
-		ret = request_irq(priv->wakeirq, omap_wake_irq,
-				  port->irqflags, "uart wakeup irq", port);
+		ret = dev_pm_set_dedicated_wake_irq(port->dev, priv->wakeirq);
 		if (ret)
 			return ret;
-		disable_irq(priv->wakeirq);
 	}
 
 	pm_runtime_get_sync(port->dev);
@@ -649,8 +637,7 @@ static int omap_8250_startup(struct uart_port *port)
 err:
 	pm_runtime_mark_last_busy(port->dev);
 	pm_runtime_put_autosuspend(port->dev);
-	if (priv->wakeirq)
-		free_irq(priv->wakeirq, port);
+	dev_pm_clear_wake_irq(port->dev);
 	return ret;
 }
 
@@ -682,10 +669,8 @@ static void omap_8250_shutdown(struct uart_port *port)
 
 	pm_runtime_mark_last_busy(port->dev);
 	pm_runtime_put_autosuspend(port->dev);
-
 	free_irq(port->irq, port);
-	if (priv->wakeirq)
-		free_irq(priv->wakeirq, port);
+	dev_pm_clear_wake_irq(port->dev);
 }
 
 static void omap_8250_throttle(struct uart_port *port)
@@ -1226,31 +1211,6 @@ static int omap8250_remove(struct platform_device *pdev)
 	return 0;
 }
 
-#ifdef CONFIG_PM
-
-static inline void omap8250_enable_wakeirq(struct omap8250_priv *priv,
-					   bool enable)
-{
-	if (!priv->wakeirq)
-		return;
-
-	if (enable)
-		enable_irq(priv->wakeirq);
-	else
-		disable_irq_nosync(priv->wakeirq);
-}
-
-static void omap8250_enable_wakeup(struct omap8250_priv *priv,
-				   bool enable)
-{
-	if (enable == priv->wakeups_enabled)
-		return;
-
-	omap8250_enable_wakeirq(priv, enable);
-	priv->wakeups_enabled = enable;
-}
-#endif
-
 #ifdef CONFIG_PM_SLEEP
 static int omap8250_prepare(struct device *dev)
 {
@@ -1277,11 +1237,6 @@ static int omap8250_suspend(struct device *dev)
 
 	serial8250_suspend_port(priv->line);
 	flush_work(&priv->qos_work);
-
-	if (device_may_wakeup(dev))
-		omap8250_enable_wakeup(priv, true);
-	else
-		omap8250_enable_wakeup(priv, false);
 	return 0;
 }
 
@@ -1289,9 +1244,6 @@ static int omap8250_resume(struct device *dev)
 {
 	struct omap8250_priv *priv = dev_get_drvdata(dev);
 
-	if (device_may_wakeup(dev))
-		omap8250_enable_wakeup(priv, false);
-
 	serial8250_resume_port(priv->line);
 	return 0;
 }
@@ -1333,7 +1285,6 @@ static int omap8250_runtime_suspend(struct device *dev)
 			return -EBUSY;
 	}
 
-	omap8250_enable_wakeup(priv, true);
 	if (up->dma)
 		omap_8250_rx_dma(up, UART_IIR_RX_TIMEOUT);
 
@@ -1354,7 +1305,6 @@ static int omap8250_runtime_resume(struct device *dev)
 		return 0;
 
 	up = serial8250_get_port(priv->line);
-	omap8250_enable_wakeup(priv, false);
 	loss_cntx = omap8250_lost_context(up);
 
 	if (loss_cntx)
diff --git a/drivers/tty/serial/omap-serial.c b/drivers/tty/serial/omap-serial.c
index 7f49172ccd86..7a2172b5e93c 100644
--- a/drivers/tty/serial/omap-serial.c
+++ b/drivers/tty/serial/omap-serial.c
@@ -38,6 +38,7 @@
 #include <linux/serial_core.h>
 #include <linux/irq.h>
 #include <linux/pm_runtime.h>
+#include <linux/pm_wakeirq.h>
 #include <linux/of.h>
 #include <linux/of_irq.h>
 #include <linux/gpio.h>
@@ -160,7 +161,6 @@ struct uart_omap_port {
 	unsigned long		port_activity;
 	int			context_loss_cnt;
 	u32			errata;
-	u8			wakeups_enabled;
 	u32			features;
 
 	int			rts_gpio;
@@ -209,28 +209,11 @@ static int serial_omap_get_context_loss_count(struct uart_omap_port *up)
 	return pdata->get_context_loss_count(up->dev);
 }
 
-static inline void serial_omap_enable_wakeirq(struct uart_omap_port *up,
-				       bool enable)
-{
-	if (!up->wakeirq)
-		return;
-
-	if (enable)
-		enable_irq(up->wakeirq);
-	else
-		disable_irq_nosync(up->wakeirq);
-}
-
+/* REVISIT: Remove this when omap3 boots in device tree only mode */
 static void serial_omap_enable_wakeup(struct uart_omap_port *up, bool enable)
 {
 	struct omap_uart_port_info *pdata = dev_get_platdata(up->dev);
 
-	if (enable == up->wakeups_enabled)
-		return;
-
-	serial_omap_enable_wakeirq(up, enable);
-	up->wakeups_enabled = enable;
-
 	if (!pdata || !pdata->enable_wakeup)
 		return;
 
@@ -750,13 +733,11 @@ static int serial_omap_startup(struct uart_port *port)
 
 	/* Optional wake-up IRQ */
 	if (up->wakeirq) {
-		retval = request_irq(up->wakeirq, serial_omap_irq,
-				     up->port.irqflags, up->name, up);
+		retval = dev_pm_set_dedicated_wake_irq(up->dev, up->wakeirq);
 		if (retval) {
 			free_irq(up->port.irq, up);
 			return retval;
 		}
-		disable_irq(up->wakeirq);
 	}
 
 	dev_dbg(up->port.dev, "serial_omap_startup+%d\n", up->port.line);
@@ -845,8 +826,7 @@ static void serial_omap_shutdown(struct uart_port *port)
 	pm_runtime_mark_last_busy(up->dev);
 	pm_runtime_put_autosuspend(up->dev);
 	free_irq(up->port.irq, up);
-	if (up->wakeirq)
-		free_irq(up->wakeirq, up);
+	dev_pm_clear_wake_irq(up->dev);
 }
 
 static void serial_omap_uart_qos_work(struct work_struct *work)
@@ -1139,13 +1119,6 @@ serial_omap_pm(struct uart_port *port, unsigned int state,
 	serial_out(up, UART_EFR, efr);
 	serial_out(up, UART_LCR, 0);
 
-	if (!device_may_wakeup(up->dev)) {
-		if (!state)
-			pm_runtime_forbid(up->dev);
-		else
-			pm_runtime_allow(up->dev);
-	}
-
 	pm_runtime_mark_last_busy(up->dev);
 	pm_runtime_put_autosuspend(up->dev);
 }