Merge tag 'regulator-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator updates from Mark Brown: "Quite an active release for driver specific updates but very little going on at the subsystem level this time for the regulator API. Summary: - Overhaul of the Qualcomm LABIBB driver. - Allow use of regulator_sync_voltage() on coupled regulators. - Support for Action ATC260x, Mediatek DVSRC and MT6315, Qualcomm PCM8180/c and PM8009-1 and Richtek RT4831 - Removal of the AB3100 driver" * tag 'regulator-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (49 commits) regulator: bd718x7, bd71828, Fix dvs voltage levels regulator: pca9450: Add sd-vsel GPIO regulator: pca9450: Enable system reset on WDOG_B assertion regulator: pca9450: Add SD_VSEL GPIO for LDO5 regulator: qcom-rpmh: fix pm8009 ldo7 regulator: mt6315: Add support for MT6315 regulator regulator: document binding for MT6315 regulator regulator: dt-bindings: Document charger-supply for max8997 regulator: qcom-labibb: Use disable_irq_nosync from isr regulator: pf8x00: Fix typo for PF8200 chip name regulator: pf8x00: set ramp_delay for bucks regulator: core: Avoid debugfs: Directory ... already present! error regulator: pf8x00: Add suspend support regulator: Make regulator_sync_voltage() usable by coupled regulators regulator: s5m8767: Drop regulators OF node reference regulator: qcom-rpmh: Add pmc8180 and pmc8180c regulator: qcom-rpmh: Add pmc8180 and pmc8180c regulator: s5m8767: Fix reference count leak regulator: remove ab3100 driver regulator: axp20x: Fix reference cout leak ...
author: Linus Torvalds <torvalds@linux-foundation.org> 2021-02-22 18:16:38 +0100
committer: Linus Torvalds <torvalds@linux-foundation.org> 2021-02-22 18:16:38 +0100
commit: d6560052c2f73db59834e9a3c0aba20579aa7059 (patch)
tree: f446d04ca3c3f4fc354f3969dfcda550f39757e0
parent: Merge tag 'regmap-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bro... (diff)
parent: Merge remote-tracking branch 'regulator/for-5.12' into regulator-next (diff)
download: linux-d6560052c2f73db59834e9a3c0aba20579aa7059.tar.xz
linux-d6560052c2f73db59834e9a3c0aba20579aa7059.zip
38 files changed, 2661 insertions, 1483 deletions
diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
index 6fe825b8ac1b..b53c5e2b335f 100644
--- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
@@ -35,6 +35,7 @@ Optional properties:
 - interrupts: Interrupt specifiers for two interrupt sources.
   - First interrupt specifier is for 'irq1' interrupt.
   - Second interrupt specifier is for 'alert' interrupt.
+- charger-supply: regulator node for charging current.
 - max8997,pmic-buck1-uses-gpio-dvs: 'buck1' can be controlled by gpio dvs.
 - max8997,pmic-buck2-uses-gpio-dvs: 'buck2' can be controlled by gpio dvs.
 - max8997,pmic-buck5-uses-gpio-dvs: 'buck5' can be controlled by gpio dvs.
diff --git a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
index d86584ed4d93..451cc4e86b01 100644
--- a/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
@@ -4,7 +4,8 @@ Required properties:
 - compatible: "microchip,mcp16502"
 - reg: I2C slave address
 - lpm-gpios: GPIO for LPM pin. Note that this GPIO *must* remain high during
-	     suspend-to-ram, keeping the PMIC into HIBERNATE mode.
+	     suspend-to-ram, keeping the PMIC into HIBERNATE mode; this
+	     property is optional;
 - regulators: A node that houses a sub-node for each regulator within
               the device. Each sub-node is identified using the node's
               name. The content of each sub-node is defined by the
diff --git a/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
new file mode 100644
index 000000000000..61dd5af80db6
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/mt6315-regulator.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/mt6315-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT6315 Regulator
+
+maintainers:
+  - Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>
+
+description: |
+  The MT6315 is a power management IC (PMIC) configurable with SPMI.
+  that contains 4 BUCKs output which can combine with each other
+  by different efuse settings.
+
+properties:
+  compatible:
+    const: mediatek,mt6315-regulator
+
+  reg:
+    maxItems: 1
+
+  regulators:
+    type: object
+    description: List of regulators and its properties
+
+    patternProperties:
+      "^vbuck[1-4]$":
+        type: object
+        $ref: "regulator.yaml#"
+
+        properties:
+          regulator-name:
+            pattern: "^vbuck[1-4]$"
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    pmic@6 {
+      compatible = "mediatek,mt6315-regulator";
+      reg = <0x6 0>;
+
+      regulators {
+        vbuck1 {
+          regulator-compatible = "vbuck1";
+          regulator-min-microvolt = <300000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-enable-ramp-delay = <256>;
+          regulator-allowed-modes = <0 1 2 4>;
+        };
+
+        vbuck3 {
+          regulator-compatible = "vbuck3";
+          regulator-min-microvolt = <300000>;
+          regulator-max-microvolt = <1193750>;
+          regulator-enable-ramp-delay = <256>;
+          regulator-allowed-modes = <0 1 2 4>;
+        };
+      };
+    };
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
index c2b0a8b6da1e..f70f2e758a00 100644
--- a/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/nxp,pca9450-regulator.yaml
@@ -87,6 +87,11 @@ properties:
 
     additionalProperties: false
 
+  sd-vsel-gpios:
+    description: GPIO that is used to switch LDO5 between being configured by
+      LDO5CTRL_L or LDO5CTRL_H register. Use this if the SD_VSEL signal is
+      connected to a host GPIO.
+
 required:
   - compatible
   - reg
diff --git a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
index 956156fe52a3..8761437ed8ad 100644
--- a/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/nxp,pf8x00-regulator.yaml
@@ -62,8 +62,11 @@ properties:
             $ref: "/schemas/types.yaml#/definitions/uint32"
             minimum: 2100
             maximum: 4500
+            deprecated: true
             description:
               BUCK regulators current limit in mA.
+              This property is deprecated, please use
+              "regulator-max-microamp" instead.
 
               Listed current limits in mA are,
               2100 (default)
@@ -73,21 +76,11 @@ properties:
 
           nxp,phase-shift:
             $ref: "/schemas/types.yaml#/definitions/uint32"
-            minimum: 45
-            maximum: 0
+            default: 0
+            enum: [ 0, 45, 90, 135, 180, 225, 270, 315 ]
             description:
               BUCK regulators phase shift control in degrees.
 
-              Listed phase shift control values in degrees are,
-              45
-              90
-              135
-              180
-              225
-              270
-              315
-              0 (default)
-
         unevaluatedProperties: false
 
       "^vsnvs$":
diff --git a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
index 7d462b899473..ce1e04354006 100644
--- a/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/qcom,rpmh-regulator.txt
@@ -50,6 +50,8 @@ First Level Nodes - PMIC
 		    "qcom,pm8350-rpmh-regulators"
 		    "qcom,pm8350c-rpmh-regulators"
 		    "qcom,pm8998-rpmh-regulators"
+		    "qcom,pmc8180-rpmh-regulators"
+		    "qcom,pmc8180c-rpmh-regulators"
 		    "qcom,pmi8998-rpmh-regulators"
 		    "qcom,pm6150-rpmh-regulators"
 		    "qcom,pm6150l-rpmh-regulators"
diff --git a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
index 53853ec20fe2..cf784bd1f5e5 100644
--- a/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
+++ b/Documentation/devicetree/bindings/regulator/qcom-labibb-regulator.yaml
@@ -22,11 +22,17 @@ properties:
     type: object
 
     properties:
+      qcom,soft-start-us:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Regulator soft start time in microseconds.
+        enum: [200, 400, 600, 800]
+        default: 200
 
       interrupts:
-        maxItems: 1
+        minItems: 1
+        maxItems: 2
         description:
-          Short-circuit interrupt for lab.
+          Short-circuit and over-current interrupts for lab.
 
     required:
       - interrupts
@@ -35,11 +41,17 @@ properties:
     type: object
 
     properties:
+      qcom,discharge-resistor-kohms:
+        $ref: /schemas/types.yaml#/definitions/uint32
+        description: Discharge resistor value in KiloOhms.
+        enum: [300, 64, 32, 16]
+        default: 300
 
       interrupts:
-        maxItems: 1
+        minItems: 1
+        maxItems: 2
         description:
-          Short-circuit interrupt for lab.
+          Short-circuit and over-current interrupts for ibb.
 
     required:
       - interrupts
@@ -57,13 +69,15 @@ examples:
       compatible = "qcom,pmi8998-lab-ibb";
 
       lab {
-        interrupts = <0x3 0x0 IRQ_TYPE_EDGE_RISING>;
-        interrupt-names = "sc-err";
+        interrupts = <0x3 0xde 0x1 IRQ_TYPE_EDGE_RISING>,
+                     <0x3 0xde 0x0 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "sc-err", "ocp";
       };
 
       ibb {
-        interrupts = <0x3 0x2 IRQ_TYPE_EDGE_RISING>;
-        interrupt-names = "sc-err";
+        interrupts = <0x3 0xdc 0x2 IRQ_TYPE_EDGE_RISING>,
+                     <0x3 0xdc 0x0 IRQ_TYPE_LEVEL_LOW>;
+        interrupt-names = "sc-err", "ocp";
       };
     };
 
diff --git a/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml
new file mode 100644
index 000000000000..d9c23333e157
--- /dev/null
+++ b/Documentation/devicetree/bindings/regulator/richtek,rt4831-regulator.yaml
@@ -0,0 +1,35 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/regulator/richtek,rt4831-regulator.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Richtek RT4831 Display Bias Voltage Regulator
+
+maintainers:
+  - ChiYuan Huang <cy_huang@richtek.com>
+
+description: |
+  RT4831 is a multifunctional device that can provide power to the LCD display
+  and LCD backlight.
+
+  For Display Bias Voltage DSVP and DSVN, the output range is about 4V to 6.5V.
+  It is sufficient to meet the current LCD power requirement.
+
+  DSVLCM is a boost regulator in IC internal as DSVP and DSVN input power.
+  Its voltage should be configured above 0.15V to 0.2V gap larger than the
+  voltage needed for DSVP and DSVN. Too much voltage gap could improve the
+  voltage drop from the heavy loading scenario. But it also make the power
+  efficiency worse. It's a trade-off.
+
+  Datasheet is available at
+  https://www.richtek.com/assets/product_file/RT4831A/DS4831A-05.pdf
+
+patternProperties:
+  "^DSV(LCM|P|N)$":
+    type: object
+    $ref: regulator.yaml#
+    description:
+      Properties for single Display Bias Voltage regulator.
+
+additionalProperties: false
diff --git a/MAINTAINERS b/MAINTAINERS
index 3d294d1a210b..7beba8384e5f 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11688,9 +11688,9 @@ F:	drivers/video/fbdev/atmel_lcdfb.c
 F:	include/video/atmel_lcdc.h
 
 MICROCHIP MCP16502 PMIC DRIVER
-M:	Andrei Stefanescu <andrei.stefanescu@microchip.com>
+M:	Claudiu Beznea <claudiu.beznea@microchip.com>
 L:	linux-arm-kernel@lists.infradead.org (moderated for non-subscribers)
-S:	Maintained
+S:	Supported
 F:	Documentation/devicetree/bindings/regulator/mcp16502-regulator.txt
 F:	drivers/regulator/mcp16502.c
 
diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
index 26a4a5a6871e..2f0528d01299 100644
--- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
+++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts
@@ -232,7 +232,7 @@
 
 &apps_rsc {
 	pm8009-rpmh-regulators {
-		compatible = "qcom,pm8009-rpmh-regulators";
+		compatible = "qcom,pm8009-1-rpmh-regulators";
 		qcom,pmic-id = "f";
 
 		vdd-s1-supply = <&vph_pwr>;
@@ -241,6 +241,13 @@
 		vdd-l5-l6-supply = <&vreg_bob>;
 		vdd-l7-supply = <&vreg_s4a_1p8>;
 
+		vreg_s2f_0p95: smps2 {
+			regulator-name = "vreg_s2f_0p95";
+			regulator-min-microvolt = <900000>;
+			regulator-max-microvolt = <952000>;
+			regulator-initial-mode = <RPMH_REGULATOR_MODE_AUTO>;
+		};
+
 		vreg_l1f_1p1: ldo1 {
 			regulator-name = "vreg_l1f_1p1";
 			regulator-min-microvolt = <1104000>;
diff --git a/drivers/mfd/ab8500-core.c b/drivers/mfd/ab8500-core.c
index a3bac9da8cbb..3b2276f04a98 100644
--- a/drivers/mfd/ab8500-core.c
+++ b/drivers/mfd/ab8500-core.c
@@ -21,7 +21,6 @@
 #include <linux/mfd/abx500/ab8500.h>
 #include <linux/mfd/abx500/ab8500-bm.h>
 #include <linux/mfd/dbx500-prcmu.h>
-#include <linux/regulator/ab8500.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 
diff --git a/drivers/regulator/Kconfig b/drivers/regulator/Kconfig
index 5abdd29fb9f3..77c43134bc9e 100644
--- a/drivers/regulator/Kconfig
+++ b/drivers/regulator/Kconfig
@@ -122,15 +122,6 @@ config REGULATOR_AAT2870
 	  If you have a AnalogicTech AAT2870 say Y to enable the
 	  regulator driver.
 
-config REGULATOR_AB3100
-	tristate "ST-Ericsson AB3100 Regulator functions"
-	depends on AB3100_CORE
-	default y if AB3100_CORE
-	help
-	 These regulators correspond to functionality in the
-	 AB3100 analog baseband dealing with power regulators
-	 for the system.
-
 config REGULATOR_AB8500
 	bool "ST-Ericsson AB8500 Power Regulators"
 	depends on AB8500_CORE
@@ -179,6 +170,14 @@ config REGULATOR_AS3722
 	  AS3722 PMIC. This will enable support for all the software
 	  controllable DCDC/LDO regulators.
 
+config REGULATOR_ATC260X
+	tristate "Actions Semi ATC260x PMIC Regulators"
+	depends on MFD_ATC260X
+	help
+	  This driver provides support for the voltage regulators on the
+	  ATC260x PMICs. This will enable support for all the software
+	  controllable DCDC/LDO regulators.
+
 config REGULATOR_AXP20X
 	tristate "X-POWERS AXP20X PMIC Regulators"
 	depends on MFD_AXP20X
@@ -732,6 +731,16 @@ config REGULATOR_MT6311
 	  This driver supports the control of different power rails of device
 	  through regulator interface.
 
+config REGULATOR_MT6315
+	tristate "MediaTek MT6315 PMIC"
+	depends on SPMI
+	select REGMAP_SPMI
+	help
+	  Say y here to select this option to enable the power regulator of
+	  MediaTek MT6315 PMIC.
+	  This driver supports the control of different power rails of device
+	  through regulator interface.
+
 config REGULATOR_MT6323
 	tristate "MediaTek MT6323 PMIC"
 	depends on MFD_MT6397
@@ -777,6 +786,16 @@ config REGULATOR_MT6397
 	  This driver supports the control of different power rails of device
 	  through regulator interface.
 
+config REGULATOR_MTK_DVFSRC
+	tristate "MediaTek DVFSRC regulator driver"
+	depends on MTK_DVFSRC
+	help
+	  Say y here to control regulator by DVFSRC (dynamic voltage
+	  and frequency scaling resource collector).
+	  This driver supports to control regulators via the DVFSRC
+	  of Mediatek. It allows for voting on regulator state
+	  between multiple users.
+
 config REGULATOR_PALMAS
 	tristate "TI Palmas PMIC Regulators"
 	depends on MFD_PALMAS
@@ -828,6 +847,10 @@ config REGULATOR_PF8X00
 	  Say y here to support the regulators found on the NXP
 	  PF8100/PF8121A/PF8200 PMIC.
 
+	  Say M here if you want to support for the regulators found
+	  on the NXP PF8100/PF8121A/PF8200 PMIC. The module will be named
+	  "pf8x00-regulator".
+
 config REGULATOR_PFUZE100
 	tristate "Freescale PFUZE100/200/3000/3001 regulator driver"
 	depends on I2C && OF
@@ -969,6 +992,16 @@ config REGULATOR_RT4801
 	  This adds support for voltage regulators in Richtek RT4801 Display Bias IC.
 	  The device supports two regulators (DSVP/DSVN).
 
+config REGULATOR_RT4831
+	tristate "Richtek RT4831 DSV Regulators"
+	depends on MFD_RT4831
+	help
+	  This adds support for voltage regulators in Richtek RT4831.
+	  There are three regulators (VLCM/DSVP/DSVN).
+	  VLCM is a virtual voltage input for DSVP/DSVN inside IC.
+	  And DSVP/DSVN is the real Vout range from 4V to 6.5V.
+	  It's common used to provide the power for the display panel.
+
 config REGULATOR_RT5033
 	tristate "Richtek RT5033 Regulators"
 	depends on MFD_RT5033
diff --git a/drivers/regulator/Makefile b/drivers/regulator/Makefile
index 680e539f6579..44d2f8bf4b74 100644
--- a/drivers/regulator/Makefile
+++ b/drivers/regulator/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_REGULATOR_88PM8607) += 88pm8607.o
 obj-$(CONFIG_REGULATOR_CROS_EC) += cros-ec-regulator.o
 obj-$(CONFIG_REGULATOR_CPCAP) += cpcap-regulator.o
 obj-$(CONFIG_REGULATOR_AAT2870) += aat2870-regulator.o
-obj-$(CONFIG_REGULATOR_AB3100) += ab3100.o
 obj-$(CONFIG_REGULATOR_AB8500)	+= ab8500-ext.o ab8500.o
 obj-$(CONFIG_REGULATOR_ACT8865) += act8865-regulator.o
 obj-$(CONFIG_REGULATOR_ACT8945A) += act8945a-regulator.o
@@ -27,6 +26,7 @@ obj-$(CONFIG_REGULATOR_ARIZONA_MICSUPP) += arizona-micsupp.o
 obj-$(CONFIG_REGULATOR_ARM_SCMI) += scmi-regulator.o
 obj-$(CONFIG_REGULATOR_AS3711) += as3711-regulator.o
 obj-$(CONFIG_REGULATOR_AS3722) += as3722-regulator.o
+obj-$(CONFIG_REGULATOR_ATC260X) += atc260x-regulator.o
 obj-$(CONFIG_REGULATOR_AXP20X) += axp20x-regulator.o
 obj-$(CONFIG_REGULATOR_BCM590XX) += bcm590xx-regulator.o
 obj-$(CONFIG_REGULATOR_BD70528) += bd70528-regulator.o
@@ -89,11 +89,13 @@ obj-$(CONFIG_REGULATOR_MP8859) += mp8859.o
 obj-$(CONFIG_REGULATOR_MP886X) += mp886x.o
 obj-$(CONFIG_REGULATOR_MPQ7920) += mpq7920.o
 obj-$(CONFIG_REGULATOR_MT6311) += mt6311-regulator.o
+obj-$(CONFIG_REGULATOR_MT6315) += mt6315-regulator.o
 obj-$(CONFIG_REGULATOR_MT6323)	+= mt6323-regulator.o
 obj-$(CONFIG_REGULATOR_MT6358)	+= mt6358-regulator.o
 obj-$(CONFIG_REGULATOR_MT6360) += mt6360-regulator.o
 obj-$(CONFIG_REGULATOR_MT6380)	+= mt6380-regulator.o
 obj-$(CONFIG_REGULATOR_MT6397)	+= mt6397-regulator.o
+obj-$(CONFIG_REGULATOR_MTK_DVFSRC) += mtk-dvfsrc-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_LABIBB) += qcom-labibb-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPM) += qcom_rpm-regulator.o
 obj-$(CONFIG_REGULATOR_QCOM_RPMH) += qcom-rpmh-regulator.o
@@ -118,6 +120,7 @@ obj-$(CONFIG_REGULATOR_RK808)   += rk808-regulator.o
 obj-$(CONFIG_REGULATOR_RN5T618) += rn5t618-regulator.o
 obj-$(CONFIG_REGULATOR_ROHM)	+= rohm-regulator.o
 obj-$(CONFIG_REGULATOR_RT4801)	+= rt4801-regulator.o
+obj-$(CONFIG_REGULATOR_RT4831)	+= rt4831-regulator.o
 obj-$(CONFIG_REGULATOR_RT5033)	+= rt5033-regulator.o
 obj-$(CONFIG_REGULATOR_RTMV20)	+= rtmv20-regulator.o
 obj-$(CONFIG_REGULATOR_S2MPA01) += s2mpa01.o
diff --git a/drivers/regulator/ab3100.c b/drivers/regulator/ab3100.c
deleted file mode 100644
index a544f45efe53..000000000000
--- a/drivers/regulator/ab3100.c
+++ /dev/null
@@ -1,724 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/*
- * drivers/regulator/ab3100.c
- *
- * Copyright (C) 2008-2009 ST-Ericsson AB
- * Low-level control of the AB3100 IC Low Dropout (LDO)
- * regulators, external regulator and buck converter
- * Author: Mattias Wallin <mattias.wallin@stericsson.com>
- * Author: Linus Walleij <linus.walleij@stericsson.com>
- */
-
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/err.h>
-#include <linux/platform_device.h>
-#include <linux/regulator/driver.h>
-#include <linux/mfd/ab3100.h>
-#include <linux/mfd/abx500.h>
-#include <linux/of.h>
-#include <linux/regulator/of_regulator.h>
-
-/* LDO registers and some handy masking definitions for AB3100 */
-#define AB3100_LDO_A		0x40
-#define AB3100_LDO_C		0x41
-#define AB3100_LDO_D		0x42
-#define AB3100_LDO_E		0x43
-#define AB3100_LDO_E_SLEEP	0x44
-#define AB3100_LDO_F		0x45
-#define AB3100_LDO_G		0x46
-#define AB3100_LDO_H		0x47
-#define AB3100_LDO_H_SLEEP_MODE	0
-#define AB3100_LDO_H_SLEEP_EN	2
-#define AB3100_LDO_ON		4
-#define AB3100_LDO_H_VSEL_AC	5
-#define AB3100_LDO_K		0x48
-#define AB3100_LDO_EXT		0x49
-#define AB3100_BUCK		0x4A
-#define AB3100_BUCK_SLEEP	0x4B
-#define AB3100_REG_ON_MASK	0x10
-
-/**
- * struct ab3100_regulator
- * A struct passed around the individual regulator functions
- * @platform_device: platform device holding this regulator
- * @dev: handle to the device
- * @plfdata: AB3100 platform data passed in at probe time
- * @regreg: regulator register number in the AB3100
- */
-struct ab3100_regulator {
-	struct device *dev;
-	struct ab3100_platform_data *plfdata;
-	u8 regreg;
-};
-
-/* The order in which registers are initialized */
-static const u8 ab3100_reg_init_order[AB3100_NUM_REGULATORS+2] = {
-	AB3100_LDO_A,
-	AB3100_LDO_C,
-	AB3100_LDO_E,
-	AB3100_LDO_E_SLEEP,
-	AB3100_LDO_F,
-	AB3100_LDO_G,
-	AB3100_LDO_H,
-	AB3100_LDO_K,
-	AB3100_LDO_EXT,
-	AB3100_BUCK,
-	AB3100_BUCK_SLEEP,
-	AB3100_LDO_D,
-};
-
-/* Preset (hardware defined) voltages for these regulators */
-#define LDO_A_VOLTAGE 2750000
-#define LDO_C_VOLTAGE 2650000
-#define LDO_D_VOLTAGE 2650000
-
-static const unsigned int ldo_e_buck_typ_voltages[] = {
-	1800000,
-	1400000,
-	1300000,
-	1200000,
-	1100000,
-	1050000,
-	900000,
-};
-
-static const unsigned int ldo_f_typ_voltages[] = {
-	1800000,
-	1400000,
-	1300000,
-	1200000,
-	1100000,
-	1050000,
-	2500000,
-	2650000,
-};
-
-static const unsigned int ldo_g_typ_voltages[] = {
-	2850000,
-	2750000,
-	1800000,
-	1500000,
-};
-
-static const unsigned int ldo_h_typ_voltages[] = {
-	2750000,
-	1800000,
-	1500000,
-	1200000,
-};
-
-static const unsigned int ldo_k_typ_voltages[] = {
-	2750000,
-	1800000,
-};
-
-
-/* The regulator devices */
-static struct ab3100_regulator
-ab3100_regulators[AB3100_NUM_REGULATORS] = {
-	{
-		.regreg = AB3100_LDO_A,
-	},
-	{
-		.regreg = AB3100_LDO_C,
-	},
-	{
-		.regreg = AB3100_LDO_D,
-	},
-	{
-		.regreg = AB3100_LDO_E,
-	},
-	{
-		.regreg = AB3100_LDO_F,
-	},
-	{
-		.regreg = AB3100_LDO_G,
-	},
-	{
-		.regreg = AB3100_LDO_H,
-	},
-	{
-		.regreg = AB3100_LDO_K,
-	},
-	{
-		.regreg = AB3100_LDO_EXT,
-		/* No voltages for the external regulator */
-	},
-	{
-		.regreg = AB3100_BUCK,
-	},
-};
-
-/*
- * General functions for enable, disable and is_enabled used for
- * LDO: A,C,E,F,G,H,K,EXT and BUCK
- */
-static int ab3100_enable_regulator(struct regulator_dev *reg)
-{
-	struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
-	int err;
-	u8 regval;
-
-	err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
-						&regval);
-	if (err) {
-		dev_warn(&reg->dev, "failed to get regid %d value\n",
-			 abreg->regreg);
-		return err;
-	}
-
-	/* The regulator is already on, no reason to go further */
-	if (regval & AB3100_REG_ON_MASK)
-		return 0;
-
-	regval |= AB3100_REG_ON_MASK;
-
-	err = abx500_set_register_interruptible(abreg->dev, 0, abreg->regreg,
-						regval);
-	if (err) {
-		dev_warn(&reg->dev, "failed to set regid %d value\n",
-			 abreg->regreg);
-		return err;
-	}
-
-	return 0;
-}
-
-static int ab3100_disable_regulator(struct regulator_dev *reg)
-{
-	struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
-	int err;
-	u8 regval;
-
-	/*
-	 * LDO D is a special regulator. When it is disabled, the entire
-	 * system is shut down. So this is handled specially.
-	 */
-	pr_info("Called ab3100_disable_regulator\n");
-	if (abreg->regreg == AB3100_LDO_D) {
-		dev_info(&reg->dev, "disabling LDO D - shut down system\n");
-		/* Setting LDO D to 0x00 cuts the power to the SoC */
-		return abx500_set_register_interruptible(abreg->dev, 0,
-							 AB3100_LDO_D, 0x00U);
-	}
-
-	/*
-	 * All other regulators are handled here
-	 */
-	err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
-						&regval);
-	if (err) {
-		dev_err(&reg->dev, "unable to get register 0x%x\n",
-			abreg->regreg);
-		return err;
-	}
-	regval &= ~AB3100_REG_ON_MASK;
-	return abx500_set_register_interruptible(abreg->dev, 0, abreg->regreg,
-						 regval);
-}
-
-static int ab3100_is_enabled_regulator(struct regulator_dev *reg)
-{
-	struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
-	u8 regval;
-	int err;
-
-	err = abx500_get_register_interruptible(abreg->dev, 0, abreg->regreg,
-						&regval);
-	if (err) {
-		dev_err(&reg->dev, "unable to get register 0x%x\n",
-			abreg->regreg);
-		return err;
-	}
-
-	return regval & AB3100_REG_ON_MASK;
-}
-
-static int ab3100_get_voltage_regulator(struct regulator_dev *reg)
-{
-	struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
-	u8 regval;
-	int err;
-
-	/*
-	 * For variable types, read out setting and index into
-	 * supplied voltage list.
-	 */
-	err = abx500_get_register_interruptible(abreg->dev, 0,
-						abreg->regreg, &regval);
-	if (err) {
-		dev_warn(&reg->dev,
-			 "failed to get regulator value in register %02x\n",
-			 abreg->regreg);
-		return err;
-	}
-
-	/* The 3 highest bits index voltages */
-	regval &= 0xE0;
-	regval >>= 5;
-
-	if (regval >= reg->desc->n_voltages) {
-		dev_err(&reg->dev,
-			"regulator register %02x contains an illegal voltage setting\n",
-			abreg->regreg);
-		return -EINVAL;
-	}
-
-	return reg->desc->volt_table[regval];
-}
-
-static int ab3100_set_voltage_regulator_sel(struct regulator_dev *reg,
-					    unsigned selector)
-{
-	struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
-	u8 regval;
-	int err;
-
-	err = abx500_get_register_interruptible(abreg->dev, 0,
-						abreg->regreg, &regval);
-	if (err) {
-		dev_warn(&reg->dev,
-			 "failed to get regulator register %02x\n",
-			 abreg->regreg);
-		return err;
-	}
-
-	/* The highest three bits control the variable regulators */
-	regval &= ~0xE0;
-	regval |= (selector << 5);
-
-	err = abx500_set_register_interruptible(abreg->dev, 0,
-						abreg->regreg, regval);
-	if (err)
-		dev_warn(&reg->dev, "failed to set regulator register %02x\n",
-			abreg->regreg);
-
-	return err;
-}
-
-static int ab3100_set_suspend_voltage_regulator(struct regulator_dev *reg,
-						int uV)
-{
-	struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
-	u8 regval;
-	int err;
-	int bestindex;
-	u8 targetreg;
-
-	if (abreg->regreg == AB3100_LDO_E)
-		targetreg = AB3100_LDO_E_SLEEP;
-	else if (abreg->regreg == AB3100_BUCK)
-		targetreg = AB3100_BUCK_SLEEP;
-	else
-		return -EINVAL;
-
-	/* LDO E and BUCK have special suspend voltages you can set */
-	bestindex = regulator_map_voltage_iterate(reg, uV, uV);
-
-	err = abx500_get_register_interruptible(abreg->dev, 0,
-						targetreg, &regval);
-	if (err) {
-		dev_warn(&reg->dev,
-			 "failed to get regulator register %02x\n",
-			 targetreg);
-		return err;
-	}
-
-	/* The highest three bits control the variable regulators */
-	regval &= ~0xE0;
-	regval |= (bestindex << 5);
-
-	err = abx500_set_register_interruptible(abreg->dev, 0,
-						targetreg, regval);
-	if (err)
-		dev_warn(&reg->dev, "failed to set regulator register %02x\n",
-			abreg->regreg);
-
-	return err;
-}
-
-/*
- * The external regulator can just define a fixed voltage.
- */
-static int ab3100_get_voltage_regulator_external(struct regulator_dev *reg)
-{
-	struct ab3100_regulator *abreg = rdev_get_drvdata(reg);
-
-	if (abreg->plfdata)
-		return abreg->plfdata->external_voltage;
-	else
-		/* TODO: encode external voltage into device tree */
-		return 0;
-}
-
-static const struct regulator_ops regulator_ops_fixed = {
-	.enable      = ab3100_enable_regulator,
-	.disable     = ab3100_disable_regulator,
-	.is_enabled  = ab3100_is_enabled_regulator,
-};
-
-static const struct regulator_ops regulator_ops_variable = {
-	.enable      = ab3100_enable_regulator,
-	.disable     = ab3100_disable_regulator,
-	.is_enabled  = ab3100_is_enabled_regulator,
-	.get_voltage = ab3100_get_voltage_regulator,
-	.set_voltage_sel = ab3100_set_voltage_regulator_sel,
-	.list_voltage = regulator_list_voltage_table,
-};
-
-static const struct regulator_ops regulator_ops_variable_sleepable = {
-	.enable      = ab3100_enable_regulator,
-	.disable     = ab3100_disable_regulator,
-	.is_enabled  = ab3100_is_enabled_regulator,
-	.get_voltage = ab3100_get_voltage_regulator,
-	.set_voltage_sel = ab3100_set_voltage_regulator_sel,
-	.set_suspend_voltage = ab3100_set_suspend_voltage_regulator,
-	.list_voltage = regulator_list_voltage_table,
-};
-
-/*
- * LDO EXT is an external regulator so it is really
- * not possible to set any voltage locally here, AB3100
- * is an on/off switch plain an simple. The external
- * voltage is defined in the board set-up if any.
- */
-static const struct regulator_ops regulator_ops_external = {
-	.enable      = ab3100_enable_regulator,
-	.disable     = ab3100_disable_regulator,
-	.is_enabled  = ab3100_is_enabled_regulator,
-	.get_voltage = ab3100_get_voltage_regulator_external,
-};
-
-static const struct regulator_desc
-ab3100_regulator_desc[AB3100_NUM_REGULATORS] = {
-	{
-		.name = "LDO_A",
-		.id   = AB3100_LDO_A,
-		.ops  = &regulator_ops_fixed,
-		.n_voltages = 1,
-		.type = REGULATOR_VOLTAGE,
-		.owner = THIS_MODULE,
-		.fixed_uV = LDO_A_VOLTAGE,
-		.enable_time = 200,
-	},
-	{
-		.name = "LDO_C",
-		.id   = AB3100_LDO_C,
-		.ops  = &regulator_ops_fixed,
-		.n_voltages = 1,
-		.type = REGULATOR_VOLTAGE,
-		.owner = THIS_MODULE,
-		.fixed_uV = LDO_C_VOLTAGE,
-		.enable_time = 200,
-	},
-	{
-		.name = "LDO_D",
-		.id   = AB3100_LDO_D,
-		.ops  = &regulator_ops_fixed,
-		.n_voltages = 1,
-		.type = REGULATOR_VOLTAGE,
-		.owner = THIS_MODULE,
-		.fixed_uV = LDO_D_VOLTAGE,
-		.enable_time = 200,
-	},
-	{
-		.name = "LDO_E",
-		.id   = AB3100_LDO_E,
-		.ops  = &regulator_ops_variable_sleepable,
-		.n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
-		.volt_table = ldo_e_buck_typ_voltages,
-		.type = REGULATOR_VOLTAGE,
-		.owner = THIS_MODULE,
-		.enable_time = 200,
-	},
-	{
-		.name = "LDO_F",
-		.id   = AB3100_LDO_F,
-		.ops  = &regulator_ops_variable,
-		.n_voltages = ARRAY_SIZE(ldo_f_typ_voltages),
-		.volt_table = ldo_f_typ_voltages,
-		.type = REGULATOR_VOLTAGE,
-		.owner = THIS_MODULE,
-		.enable_time = 600,
-	},
-	{
-		.name = "LDO_G",
-		.id   = AB3100_LDO_G,
-		.ops  = &regulator_ops_variable,
-		.n_voltages = ARRAY_SIZE(ldo_g_typ_voltages),
-		.volt_table = ldo_g_typ_voltages,
-		.type = REGULATOR_VOLTAGE,
-		.owner = THIS_MODULE,
-		.enable_time = 400,
-	},
-	{
-		.name = "LDO_H",
-		.id   = AB3100_LDO_H,
-		.ops  = &regulator_ops_variable,
-		.n_voltages = ARRAY_SIZE(ldo_h_typ_voltages),
-		.volt_table = ldo_h_typ_voltages,
-		.type = REGULATOR_VOLTAGE,
-		.owner = THIS_MODULE,
-		.enable_time = 200,
-	},
-	{
-		.name = "LDO_K",
-		.id   = AB3100_LDO_K,
-		.ops  = &regulator_ops_variable,
-		.n_voltages = ARRAY_SIZE(ldo_k_typ_voltages),
-		.volt_table = ldo_k_typ_voltages,
-		.type = REGULATOR_VOLTAGE,
-		.owner = THIS_MODULE,
-		.enable_time = 200,
-	},
-	{
-		.name = "LDO_EXT",
-		.id   = AB3100_LDO_EXT,
-		.ops  = &regulator_ops_external,
-		.type = REGULATOR_VOLTAGE,
-		.owner = THIS_MODULE,
-	},
-	{
-		.name = "BUCK",
-		.id   = AB3100_BUCK,
-		.ops  = &regulator_ops_variable_sleepable,
-		.n_voltages = ARRAY_SIZE(ldo_e_buck_typ_voltages),
-		.volt_table = ldo_e_buck_typ_voltages,
-		.type = REGULATOR_VOLTAGE,
-		.owner = THIS_MODULE,
-		.enable_time = 1000,
-	},
-};
-
-static int ab3100_regulator_register(struct platform_device *pdev,
-				     struct ab3100_platform_data *plfdata,
-				     struct regulator_init_data *init_data,
-				     struct device_node *np,
-				     unsigned long id)
-{
-	const struct regulator_desc *desc;
-	struct ab3100_regulator *reg;
-	struct regulator_dev *rdev;
-	struct regulator_config config = { };
-	int err, i;
-
-	for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
-		desc = &ab3100_regulator_desc[i];
-		if (desc->id == id)
-			break;
-	}
-	if (desc->id != id)
-		return -ENODEV;
-
-	/* Same index used for this array */
-	reg = &ab3100_regulators[i];
-
-	/*
-	 * Initialize per-regulator struct.
-	 * Inherit platform data, this comes down from the
-	 * i2c boarddata, from the machine. So if you want to
-	 * see what it looks like for a certain machine, go
-	 * into the machine I2C setup.
-	 */
-	reg->dev = &pdev->dev;
-	if (plfdata) {
-		reg->plfdata = plfdata;
-		config.init_data = &plfdata->reg_constraints[i];
-	} else if (np) {
-		config.of_node = np;
-		config.init_data = init_data;
-	}
-	config.dev = &pdev->dev;
-	config.driver_data = reg;
-
-	rdev = devm_regulator_register(&pdev->dev, desc, &config);
-	if (IS_ERR(rdev)) {
-		err = PTR_ERR(rdev);
-		dev_err(&pdev->dev,
-			"%s: failed to register regulator %s err %d\n",
-			__func__, desc->name,
-			err);
-		return err;
-	}
-
-	return 0;
-}
-
-static struct of_regulator_match ab3100_regulator_matches[] = {
-	{ .name = "ab3100_ldo_a", .driver_data = (void *) AB3100_LDO_A, },
-	{ .name = "ab3100_ldo_c", .driver_data = (void *) AB3100_LDO_C, },
-	{ .name = "ab3100_ldo_d", .driver_data = (void *) AB3100_LDO_D, },
-	{ .name = "ab3100_ldo_e", .driver_data = (void *) AB3100_LDO_E, },
-	{ .name = "ab3100_ldo_f", .driver_data = (void *) AB3100_LDO_F },
-	{ .name = "ab3100_ldo_g", .driver_data = (void *) AB3100_LDO_G },
-	{ .name = "ab3100_ldo_h", .driver_data = (void *) AB3100_LDO_H },
-	{ .name = "ab3100_ldo_k", .driver_data = (void *) AB3100_LDO_K },
-	{ .name = "ab3100_ext", .driver_data = (void *) AB3100_LDO_EXT },
-	{ .name = "ab3100_buck", .driver_data = (void *) AB3100_BUCK },
-};
-
-/*
- * Initial settings of ab3100 registers.
- * Common for below LDO regulator settings are that
- * bit 7-5 controls voltage. Bit 4 turns regulator ON(1) or OFF(0).
- * Bit 3-2 controls sleep enable and bit 1-0 controls sleep mode.
- */
-/* LDO_A 0x16: 2.75V, ON, SLEEP_A, SLEEP OFF GND */
-#define LDO_A_SETTING		0x16
-/* LDO_C 0x10: 2.65V, ON, SLEEP_A or B, SLEEP full power */
-#define LDO_C_SETTING		0x10
-/* LDO_D 0x10: 2.65V, ON, sleep mode not used */
-#define LDO_D_SETTING		0x10
-/* LDO_E 0x10: 1.8V, ON, SLEEP_A or B, SLEEP full power */
-#define LDO_E_SETTING		0x10
-/* LDO_E SLEEP 0x00: 1.8V, not used, SLEEP_A or B, not used */
-#define LDO_E_SLEEP_SETTING	0x00
-/* LDO_F 0xD0: 2.5V, ON, SLEEP_A or B, SLEEP full power */
-#define LDO_F_SETTING		0xD0
-/* LDO_G 0x00: 2.85V, OFF, SLEEP_A or B, SLEEP full power */
-#define LDO_G_SETTING		0x00
-/* LDO_H 0x18: 2.75V, ON, SLEEP_B, SLEEP full power */
-#define LDO_H_SETTING		0x18
-/* LDO_K 0x00: 2.75V, OFF, SLEEP_A or B, SLEEP full power */
-#define LDO_K_SETTING		0x00
-/* LDO_EXT 0x00: Voltage not set, OFF, not used, not used */
-#define LDO_EXT_SETTING		0x00
-/* BUCK 0x7D: 1.2V, ON, SLEEP_A and B, SLEEP low power */
-#define BUCK_SETTING	0x7D
-/* BUCK SLEEP 0xAC: 1.05V, Not used, SLEEP_A and B, Not used */
-#define BUCK_SLEEP_SETTING	0xAC
-
-static const u8 ab3100_reg_initvals[] = {
-	LDO_A_SETTING,
-	LDO_C_SETTING,
-	LDO_E_SETTING,
-	LDO_E_SLEEP_SETTING,
-	LDO_F_SETTING,
-	LDO_G_SETTING,
-	LDO_H_SETTING,
-	LDO_K_SETTING,
-	LDO_EXT_SETTING,
-	BUCK_SETTING,
-	BUCK_SLEEP_SETTING,
-	LDO_D_SETTING,
-};
-
-static int
-ab3100_regulator_of_probe(struct platform_device *pdev, struct device_node *np)
-{
-	int err, i;
-
-	/*
-	 * Set up the regulator registers, as was previously done with
-	 * platform data.
-	 */
-	/* Set up regulators */
-	for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) {
-		err = abx500_set_register_interruptible(&pdev->dev, 0,
-					ab3100_reg_init_order[i],
-					ab3100_reg_initvals[i]);
-		if (err) {
-			dev_err(&pdev->dev, "regulator initialization failed with error %d\n",
-				err);
-			return err;
-		}
-	}
-
-	for (i = 0; i < ARRAY_SIZE(ab3100_regulator_matches); i++) {
-		err = ab3100_regulator_register(
-			pdev, NULL, ab3100_regulator_matches[i].init_data,
-			ab3100_regulator_matches[i].of_node,
-			(unsigned long)ab3100_regulator_matches[i].driver_data);
-		if (err)
-			return err;
-	}
-
-	return 0;
-}
-
-
-static int ab3100_regulators_probe(struct platform_device *pdev)
-{
-	struct ab3100_platform_data *plfdata = dev_get_platdata(&pdev->dev);
-	struct device_node *np = pdev->dev.of_node;
-	int err = 0;
-	u8 data;
-	int i;
-
-	/* Check chip state */
-	err = abx500_get_register_interruptible(&pdev->dev, 0,
-						AB3100_LDO_D, &data);
-	if (err) {
-		dev_err(&pdev->dev, "could not read initial status of LDO_D\n");
-		return err;
-	}
-	if (data & 0x10)
-		dev_notice(&pdev->dev,
-			   "chip is already in active mode (Warm start)\n");
-	else
-		dev_notice(&pdev->dev,
-			   "chip is in inactive mode (Cold start)\n");
-
-	if (np) {
-		err = of_regulator_match(&pdev->dev, np,
-					 ab3100_regulator_matches,
-					 ARRAY_SIZE(ab3100_regulator_matches));
-		if (err < 0) {
-			dev_err(&pdev->dev,
-				"Error parsing regulator init data: %d\n", err);
-			return err;
-		}
-		return ab3100_regulator_of_probe(pdev, np);
-	}
-
-	/* Set up regulators */
-	for (i = 0; i < ARRAY_SIZE(ab3100_reg_init_order); i++) {
-		err = abx500_set_register_interruptible(&pdev->dev, 0,
-					ab3100_reg_init_order[i],
-					plfdata->reg_initvals[i]);
-		if (err) {
-			dev_err(&pdev->dev, "regulator initialization failed with error %d\n",
-				err);
-			return err;
-		}
-	}
-
-	/* Register the regulators */
-	for (i = 0; i < AB3100_NUM_REGULATORS; i++) {
-		const struct regulator_desc *desc = &ab3100_regulator_desc[i];
-
-		err = ab3100_regulator_register(pdev, plfdata, NULL, NULL,
-						desc->id);
-		if (err)
-			return err;
-	}
-
-	return 0;
-}
-
-static struct platform_driver ab3100_regulators_driver = {
-	.driver = {
-		.name  = "ab3100-regulators",
-	},
-	.probe = ab3100_regulators_probe,
-};
-
-static __init int ab3100_regulators_init(void)
-{
-	return platform_driver_register(&ab3100_regulators_driver);
-}
-
-static __exit void ab3100_regulators_exit(void)
-{
-	platform_driver_unregister(&ab3100_regulators_driver);
-}
-
-subsys_initcall(ab3100_regulators_init);
-module_exit(ab3100_regulators_exit);
-
-MODULE_AUTHOR("Mattias Wallin <mattias.wallin@stericsson.com>");
-MODULE_DESCRIPTION("AB3100 Regulator driver");
-MODULE_LICENSE("GPL");
-MODULE_ALIAS("platform:ab3100-regulators");
diff --git a/drivers/regulator/ab8500-ext.c b/drivers/regulator/ab8500-ext.c
index 8bb43a671ded..4f26952caa56 100644
--- a/drivers/regulator/ab8500-ext.c
+++ b/drivers/regulator/ab8500-ext.c
@@ -22,403 +22,17 @@
 #include <linux/regulator/of_regulator.h>
 #include <linux/mfd/abx500.h>
 #include <linux/mfd/abx500/ab8500.h>
-#include <linux/regulator/ab8500.h>
-
-static struct regulator_consumer_supply ab8500_vaux1_consumers[] = {
-	/* Main display, u8500 R3 uib */
-	REGULATOR_SUPPLY("vddi", "mcde_disp_sony_acx424akp.0"),
-	/* Main display, u8500 uib and ST uib */
-	REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.0"),
-	/* Secondary display, ST uib */
-	REGULATOR_SUPPLY("vdd1", "samsung_s6d16d0.1"),
-	/* SFH7741 proximity sensor */
-	REGULATOR_SUPPLY("vcc", "gpio-keys.0"),
-	/* BH1780GLS ambient light sensor */
-	REGULATOR_SUPPLY("vcc", "2-0029"),
-	/* lsm303dlh accelerometer */
-	REGULATOR_SUPPLY("vdd", "2-0018"),
-	/* lsm303dlhc accelerometer */
-	REGULATOR_SUPPLY("vdd", "2-0019"),
-	/* lsm303dlh magnetometer */
-	REGULATOR_SUPPLY("vdd", "2-001e"),
-	/* Rohm BU21013 Touchscreen devices */
-	REGULATOR_SUPPLY("avdd", "3-005c"),
-	REGULATOR_SUPPLY("avdd", "3-005d"),
-	/* Synaptics RMI4 Touchscreen device */
-	REGULATOR_SUPPLY("vdd", "3-004b"),
-	/* L3G4200D Gyroscope device */
-	REGULATOR_SUPPLY("vdd", "2-0068"),
-	/* Ambient light sensor device */
-	REGULATOR_SUPPLY("vdd", "3-0029"),
-	/* Pressure sensor device */
-	REGULATOR_SUPPLY("vdd", "2-005c"),
-	/* Cypress TrueTouch Touchscreen device */
-	REGULATOR_SUPPLY("vcpin", "spi8.0"),
-	/* Camera device */
-	REGULATOR_SUPPLY("vaux12v5", "mmio_camera"),
-};
-
-static struct regulator_consumer_supply ab8500_vaux2_consumers[] = {
-	/* On-board eMMC power */
-	REGULATOR_SUPPLY("vmmc", "sdi4"),
-	/* AB8500 audio codec */
-	REGULATOR_SUPPLY("vcc-N2158", "ab8500-codec.0"),
-	/* AB8500 accessory detect 1 */
-	REGULATOR_SUPPLY("vcc-N2158", "ab8500-acc-det.0"),
-	/* AB8500 Tv-out device */
-	REGULATOR_SUPPLY("vcc-N2158", "mcde_tv_ab8500.4"),
-	/* AV8100 HDMI device */
-	REGULATOR_SUPPLY("vcc-N2158", "av8100_hdmi.3"),
-};
-
-static struct regulator_consumer_supply ab8500_vaux3_consumers[] = {
-	REGULATOR_SUPPLY("v-SD-STM", "stm"),
-	/* External MMC slot power */
-	REGULATOR_SUPPLY("vmmc", "sdi0"),
-};
-
-static struct regulator_consumer_supply ab8500_vtvout_consumers[] = {
-	/* TV-out DENC supply */
-	REGULATOR_SUPPLY("vtvout", "ab8500-denc.0"),
-	/* Internal general-purpose ADC */
-	REGULATOR_SUPPLY("vddadc", "ab8500-gpadc.0"),
-	/* ADC for charger */
-	REGULATOR_SUPPLY("vddadc", "ab8500-charger.0"),
-	/* AB8500 Tv-out device */
-	REGULATOR_SUPPLY("vtvout", "mcde_tv_ab8500.4"),
-};
-
-static struct regulator_consumer_supply ab8500_vaud_consumers[] = {
-	/* AB8500 audio-codec main supply */
-	REGULATOR_SUPPLY("vaud", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vamic1_consumers[] = {
-	/* AB8500 audio-codec Mic1 supply */
-	REGULATOR_SUPPLY("vamic1", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vamic2_consumers[] = {
-	/* AB8500 audio-codec Mic2 supply */
-	REGULATOR_SUPPLY("vamic2", "ab8500-codec.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vdmic_consumers[] = {
-	/* AB8500 audio-codec DMic supply */
-	REGULATOR_SUPPLY("vdmic", "ab8500-codec.0"),
-};
 
-static struct regulator_consumer_supply ab8500_vintcore_consumers[] = {
-	/* SoC core supply, no device */
-	REGULATOR_SUPPLY("v-intcore", NULL),
-	/* USB Transceiver */
-	REGULATOR_SUPPLY("vddulpivio18", "ab8500-usb.0"),
-	/* Handled by abx500 clk driver */
-	REGULATOR_SUPPLY("v-intcore", "abx500-clk.0"),
-};
-
-static struct regulator_consumer_supply ab8500_vana_consumers[] = {
-	/* DB8500 DSI */
-	REGULATOR_SUPPLY("vdddsi1v2", "mcde"),
-	REGULATOR_SUPPLY("vdddsi1v2", "b2r2_core"),
-	REGULATOR_SUPPLY("vdddsi1v2", "b2r2_1_core"),
-	REGULATOR_SUPPLY("vdddsi1v2", "dsilink.0"),
-	REGULATOR_SUPPLY("vdddsi1v2", "dsilink.1"),
-	REGULATOR_SUPPLY("vdddsi1v2", "dsilink.2"),
-	/* DB8500 CSI */
-	REGULATOR_SUPPLY("vddcsi1v2", "mmio_camera"),
-};
-
-/* ab8500 regulator register initialization */
-static struct ab8500_regulator_reg_init ab8500_reg_init[] = {
-	/*
-	 * VanaRequestCtrl          = HP/LP depending on VxRequest
-	 * VextSupply1RequestCtrl   = HP/LP depending on VxRequest
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL2,       0xf0, 0x00),
-	/*
-	 * VextSupply2RequestCtrl   = HP/LP depending on VxRequest
-	 * VextSupply3RequestCtrl   = HP/LP depending on VxRequest
-	 * Vaux1RequestCtrl         = HP/LP depending on VxRequest
-	 * Vaux2RequestCtrl         = HP/LP depending on VxRequest
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL3,       0xff, 0x00),
-	/*
-	 * Vaux3RequestCtrl         = HP/LP depending on VxRequest
-	 * SwHPReq                  = Control through SWValid disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUREQUESTCTRL4,       0x07, 0x00),
-	/*
-	 * VanaSysClkReq1HPValid    = disabled
-	 * Vaux1SysClkReq1HPValid   = disabled
-	 * Vaux2SysClkReq1HPValid   = disabled
-	 * Vaux3SysClkReq1HPValid   = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID1, 0xe8, 0x00),
-	/*
-	 * VextSupply1SysClkReq1HPValid = disabled
-	 * VextSupply2SysClkReq1HPValid = disabled
-	 * VextSupply3SysClkReq1HPValid = SysClkReq1 controlled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQ1HPVALID2, 0x70, 0x40),
-	/*
-	 * VanaHwHPReq1Valid        = disabled
-	 * Vaux1HwHPreq1Valid       = disabled
-	 * Vaux2HwHPReq1Valid       = disabled
-	 * Vaux3HwHPReqValid        = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID1,     0xe8, 0x00),
-	/*
-	 * VextSupply1HwHPReq1Valid = disabled
-	 * VextSupply2HwHPReq1Valid = disabled
-	 * VextSupply3HwHPReq1Valid = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ1VALID2,     0x07, 0x00),
-	/*
-	 * VanaHwHPReq2Valid        = disabled
-	 * Vaux1HwHPReq2Valid       = disabled
-	 * Vaux2HwHPReq2Valid       = disabled
-	 * Vaux3HwHPReq2Valid       = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID1,     0xe8, 0x00),
-	/*
-	 * VextSupply1HwHPReq2Valid = disabled
-	 * VextSupply2HwHPReq2Valid = disabled
-	 * VextSupply3HwHPReq2Valid = HWReq2 controlled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUHWHPREQ2VALID2,     0x07, 0x04),
-	/*
-	 * VanaSwHPReqValid         = disabled
-	 * Vaux1SwHPReqValid        = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID1,      0xa0, 0x00),
-	/*
-	 * Vaux2SwHPReqValid        = disabled
-	 * Vaux3SwHPReqValid        = disabled
-	 * VextSupply1SwHPReqValid  = disabled
-	 * VextSupply2SwHPReqValid  = disabled
-	 * VextSupply3SwHPReqValid  = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSWHPREQVALID2,      0x1f, 0x00),
-	/*
-	 * SysClkReq2Valid1         = SysClkReq2 controlled
-	 * SysClkReq3Valid1         = disabled
-	 * SysClkReq4Valid1         = SysClkReq4 controlled
-	 * SysClkReq5Valid1         = disabled
-	 * SysClkReq6Valid1         = SysClkReq6 controlled
-	 * SysClkReq7Valid1         = disabled
-	 * SysClkReq8Valid1         = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID1,    0xfe, 0x2a),
-	/*
-	 * SysClkReq2Valid2         = disabled
-	 * SysClkReq3Valid2         = disabled
-	 * SysClkReq4Valid2         = disabled
-	 * SysClkReq5Valid2         = disabled
-	 * SysClkReq6Valid2         = SysClkReq6 controlled
-	 * SysClkReq7Valid2         = disabled
-	 * SysClkReq8Valid2         = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUSYSCLKREQVALID2,    0xfe, 0x20),
-	/*
-	 * VTVoutEna                = disabled
-	 * Vintcore12Ena            = disabled
-	 * Vintcore12Sel            = 1.25 V
-	 * Vintcore12LP             = inactive (HP)
-	 * VTVoutLP                 = inactive (HP)
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUMISC1,              0xfe, 0x10),
-	/*
-	 * VaudioEna                = disabled
-	 * VdmicEna                 = disabled
-	 * Vamic1Ena                = disabled
-	 * Vamic2Ena                = disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUDIOSUPPLY,           0x1e, 0x00),
-	/*
-	 * Vamic1_dzout             = high-Z when Vamic1 is disabled
-	 * Vamic2_dzout             = high-Z when Vamic2 is disabled
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL1VAMIC,         0x03, 0x00),
-	/*
-	 * VPll                     = Hw controlled (NOTE! PRCMU bits)
-	 * VanaRegu                 = force off
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VPLLVANAREGU,           0x0f, 0x02),
-	/*
-	 * VrefDDREna               = disabled
-	 * VrefDDRSleepMode         = inactive (no pulldown)
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VREFDDR,                0x03, 0x00),
-	/*
-	 * VextSupply1Regu          = force LP
-	 * VextSupply2Regu          = force OFF
-	 * VextSupply3Regu          = force HP (-> STBB2=LP and TPS=LP)
-	 * ExtSupply2Bypass         = ExtSupply12LPn ball is 0 when Ena is 0
-	 * ExtSupply3Bypass         = ExtSupply3LPn ball is 0 when Ena is 0
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_EXTSUPPLYREGU,          0xff, 0x13),
-	/*
-	 * Vaux1Regu                = force HP
-	 * Vaux2Regu                = force off
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUX12REGU,             0x0f, 0x01),
-	/*
-	 * Vaux3Regu                = force off
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3REGU,          0x03, 0x00),
-	/*
-	 * Vaux1Sel                 = 2.8 V
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUX1SEL,               0x0f, 0x0C),
-	/*
-	 * Vaux2Sel                 = 2.9 V
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VAUX2SEL,               0x0f, 0x0d),
-	/*
-	 * Vaux3Sel                 = 2.91 V
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_VRF1VAUX3SEL,           0x07, 0x07),
-	/*
-	 * VextSupply12LP           = disabled (no LP)
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRL2SPARE,         0x01, 0x00),
-	/*
-	 * Vaux1Disch               = short discharge time
-	 * Vaux2Disch               = short discharge time
-	 * Vaux3Disch               = short discharge time
-	 * Vintcore12Disch          = short discharge time
-	 * VTVoutDisch              = short discharge time
-	 * VaudioDisch              = short discharge time
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH,          0xfc, 0x00),
-	/*
-	 * VanaDisch                = short discharge time
-	 * VdmicPullDownEna         = pulldown disabled when Vdmic is disabled
-	 * VdmicDisch               = short discharge time
-	 */
-	INIT_REGULATOR_REGISTER(AB8500_REGUCTRLDISCH2,         0x16, 0x00),
+/* AB8500 external regulators */
+enum ab8500_ext_regulator_id {
+	AB8500_EXT_SUPPLY1,
+	AB8500_EXT_SUPPLY2,
+	AB8500_EXT_SUPPLY3,
+	AB8500_NUM_EXT_REGULATORS,
 };
 
-/* AB8500 regulators */
-static struct regulator_init_data ab8500_regulators[AB8500_NUM_REGULATORS] = {
-	/* supplies to the display/camera */
-	[AB8500_LDO_AUX1] = {
-		.supply_regulator = "ab8500-ext-supply3",
-		.constraints = {
-			.name = "V-DISPLAY",
-			.min_uV = 2800000,
-			.max_uV = 3300000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS,
-			.boot_on = 1, /* display is on at boot */
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux1_consumers),
-		.consumer_supplies = ab8500_vaux1_consumers,
-	},
-	/* supplies to the on-board eMMC */
-	[AB8500_LDO_AUX2] = {
-		.supply_regulator = "ab8500-ext-supply3",
-		.constraints = {
-			.name = "V-eMMC1",
-			.min_uV = 1100000,
-			.max_uV = 3300000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS |
-					  REGULATOR_CHANGE_MODE,
-			.valid_modes_mask = REGULATOR_MODE_NORMAL |
-					    REGULATOR_MODE_IDLE,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux2_consumers),
-		.consumer_supplies = ab8500_vaux2_consumers,
-	},
-	/* supply for VAUX3, supplies to SDcard slots */
-	[AB8500_LDO_AUX3] = {
-		.supply_regulator = "ab8500-ext-supply3",
-		.constraints = {
-			.name = "V-MMC-SD",
-			.min_uV = 1100000,
-			.max_uV = 3300000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS |
-					  REGULATOR_CHANGE_MODE,
-			.valid_modes_mask = REGULATOR_MODE_NORMAL |
-					    REGULATOR_MODE_IDLE,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaux3_consumers),
-		.consumer_supplies = ab8500_vaux3_consumers,
-	},
-	/* supply for tvout, gpadc, TVOUT LDO */
-	[AB8500_LDO_TVOUT] = {
-		.constraints = {
-			.name = "V-TVOUT",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vtvout_consumers),
-		.consumer_supplies = ab8500_vtvout_consumers,
-	},
-	/* supply for ab8500-vaudio, VAUDIO LDO */
-	[AB8500_LDO_AUDIO] = {
-		.constraints = {
-			.name = "V-AUD",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vaud_consumers),
-		.consumer_supplies = ab8500_vaud_consumers,
-	},
-	/* supply for v-anamic1 VAMic1-LDO */
-	[AB8500_LDO_ANAMIC1] = {
-		.constraints = {
-			.name = "V-AMIC1",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic1_consumers),
-		.consumer_supplies = ab8500_vamic1_consumers,
-	},
-	/* supply for v-amic2, VAMIC2 LDO, reuse constants for AMIC1 */
-	[AB8500_LDO_ANAMIC2] = {
-		.constraints = {
-			.name = "V-AMIC2",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vamic2_consumers),
-		.consumer_supplies = ab8500_vamic2_consumers,
-	},
-	/* supply for v-dmic, VDMIC LDO */
-	[AB8500_LDO_DMIC] = {
-		.constraints = {
-			.name = "V-DMIC",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vdmic_consumers),
-		.consumer_supplies = ab8500_vdmic_consumers,
-	},
-	/* supply for v-intcore12, VINTCORE12 LDO */
-	[AB8500_LDO_INTCORE] = {
-		.constraints = {
-			.name = "V-INTCORE",
-			.min_uV = 1250000,
-			.max_uV = 1350000,
-			.input_uV = 1800000,
-			.valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
-					  REGULATOR_CHANGE_STATUS |
-					  REGULATOR_CHANGE_MODE |
-					  REGULATOR_CHANGE_DRMS,
-			.valid_modes_mask = REGULATOR_MODE_NORMAL |
-					    REGULATOR_MODE_IDLE,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vintcore_consumers),
-		.consumer_supplies = ab8500_vintcore_consumers,
-	},
-	/* supply for U8500 CSI-DSI, VANA LDO */
-	[AB8500_LDO_ANA] = {
-		.constraints = {
-			.name = "V-CSI-DSI",
-			.valid_ops_mask = REGULATOR_CHANGE_STATUS,
-		},
-		.num_consumer_supplies = ARRAY_SIZE(ab8500_vana_consumers),
-		.consumer_supplies = ab8500_vana_consumers,
-	},
+struct ab8500_ext_regulator_cfg {
+	bool hwreq; /* requires hw mode or high power mode */
 };
 
 /* supply for VextSupply3 */
@@ -465,15 +79,6 @@ static struct regulator_init_data ab8500_ext_regulators[] = {
 	},
 };
 
-static struct ab8500_regulator_platform_data ab8500_regulator_plat_data = {
-	.reg_init               = ab8500_reg_init,
-	.num_reg_init           = ARRAY_SIZE(ab8500_reg_init),
-	.regulator              = ab8500_regulators,
-	.num_regulator          = ARRAY_SIZE(ab8500_regulators),
-	.ext_regulator          = ab8500_ext_regulators,
-	.num_ext_regulator      = ARRAY_SIZE(ab8500_ext_regulators),
-};
-
 /**
  * struct ab8500_ext_regulator_info - ab8500 regulator information
  * @dev: device pointer
@@ -788,7 +393,6 @@ static struct ab8500_ext_regulator_info
 static int ab8500_ext_regulator_probe(struct platform_device *pdev)
 {
 	struct ab8500 *ab8500 = dev_get_drvdata(pdev->dev.parent);
-	struct ab8500_regulator_platform_data *pdata = &ab8500_regulator_plat_data;
 	struct regulator_config config = { };
 	struct regulator_dev *rdev;
 	int i;
@@ -798,12 +402,6 @@ static int ab8500_ext_regulator_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	/* make sure the platform data has the correct size */
-	if (pdata->num_ext_regulator != ARRAY_SIZE(ab8500_ext_regulator_info)) {
-		dev_err(&pdev->dev, "Configuration error: size mismatch.\n");
-		return -EINVAL;
-	}
-
 	/* check for AB8500 2.x */
 	if (is_ab8500_2p0_or_earlier(ab8500)) {
 		struct ab8500_ext_regulator_info *info;
@@ -823,11 +421,11 @@ static int ab8500_ext_regulator_probe(struct platform_device *pdev)
 		info = &ab8500_ext_regulator_info[i];
 		info->dev = &pdev->dev;
 		info->cfg = (struct ab8500_ext_regulator_cfg *)
-			pdata->ext_regulator[i].driver_data;
+			ab8500_ext_regulators[i].driver_data;
 
 		config.dev = &pdev->dev;
 		config.driver_data = info;
-		config.init_data = &pdata->ext_regulator[i];
+		config.init_data = &ab8500_ext_regulators[i];
 
 		/* register regulator with framework */
 		rdev = devm_regulator_register(&pdev->dev, &info->desc,
diff --git a/drivers/regulator/ab8500.c b/drivers/regulator/ab8500.c
index 47b8b6f7b571..23a401734a98 100644
--- a/drivers/regulator/ab8500.c
+++ b/drivers/regulator/ab8500.c
@@ -25,9 +25,123 @@
 #include <linux/regulator/of_regulator.h>
 #include <linux/regulator/driver.h>
 #include <linux/regulator/machine.h>
-#include <linux/regulator/ab8500.h>
 #include <linux/slab.h>
 
+/* AB8500 regulators */
+enum ab8500_regulator_id {
+	AB8500_LDO_AUX1,
+	AB8500_LDO_AUX2,
+	AB8500_LDO_AUX3,
+	AB8500_LDO_INTCORE,
+	AB8500_LDO_TVOUT,
+	AB8500_LDO_AUDIO,
+	AB8500_LDO_ANAMIC1,
+	AB8500_LDO_ANAMIC2,
+	AB8500_LDO_DMIC,
+	AB8500_LDO_ANA,
+	AB8500_NUM_REGULATORS,
+};
+
+/* AB8505 regulators */
+enum ab8505_regulator_id {
+	AB8505_LDO_AUX1,
+	AB8505_LDO_AUX2,
+	AB8505_LDO_AUX3,
+	AB8505_LDO_AUX4,
+	AB8505_LDO_AUX5,
+	AB8505_LDO_AUX6,
+	AB8505_LDO_INTCORE,
+	AB8505_LDO_ADC,
+	AB8505_LDO_AUDIO,
+	AB8505_LDO_ANAMIC1,
+	AB8505_LDO_ANAMIC2,
+	AB8505_LDO_AUX8,
+	AB8505_LDO_ANA,
+	AB8505_NUM_REGULATORS,
+};
+
+/* AB8500 registers */
+enum ab8500_regulator_reg {
+	AB8500_REGUREQUESTCTRL2,
+	AB8500_REGUREQUESTCTRL3,
+	AB8500_REGUREQUESTCTRL4,
+	AB8500_REGUSYSCLKREQ1HPVALID1,
+	AB8500_REGUSYSCLKREQ1HPVALID2,
+	AB8500_REGUHWHPREQ1VALID1,
+	AB8500_REGUHWHPREQ1VALID2,
+	AB8500_REGUHWHPREQ2VALID1,
+	AB8500_REGUHWHPREQ2VALID2,
+	AB8500_REGUSWHPREQVALID1,
+	AB8500_REGUSWHPREQVALID2,
+	AB8500_REGUSYSCLKREQVALID1,
+	AB8500_REGUSYSCLKREQVALID2,
+	AB8500_REGUMISC1,
+	AB8500_VAUDIOSUPPLY,
+	AB8500_REGUCTRL1VAMIC,
+	AB8500_VPLLVANAREGU,
+	AB8500_VREFDDR,
+	AB8500_EXTSUPPLYREGU,
+	AB8500_VAUX12REGU,
+	AB8500_VRF1VAUX3REGU,
+	AB8500_VAUX1SEL,
+	AB8500_VAUX2SEL,
+	AB8500_VRF1VAUX3SEL,
+	AB8500_REGUCTRL2SPARE,
+	AB8500_REGUCTRLDISCH,
+	AB8500_REGUCTRLDISCH2,
+	AB8500_NUM_REGULATOR_REGISTERS,
+};
+
+/* AB8505 registers */
+enum ab8505_regulator_reg {
+	AB8505_REGUREQUESTCTRL1,
+	AB8505_REGUREQUESTCTRL2,
+	AB8505_REGUREQUESTCTRL3,
+	AB8505_REGUREQUESTCTRL4,
+	AB8505_REGUSYSCLKREQ1HPVALID1,
+	AB8505_REGUSYSCLKREQ1HPVALID2,
+	AB8505_REGUHWHPREQ1VALID1,
+	AB8505_REGUHWHPREQ1VALID2,
+	AB8505_REGUHWHPREQ2VALID1,
+	AB8505_REGUHWHPREQ2VALID2,
+	AB8505_REGUSWHPREQVALID1,
+	AB8505_REGUSWHPREQVALID2,
+	AB8505_REGUSYSCLKREQVALID1,
+	AB8505_REGUSYSCLKREQVALID2,
+	AB8505_REGUVAUX4REQVALID,
+	AB8505_REGUMISC1,
+	AB8505_VAUDIOSUPPLY,
+	AB8505_REGUCTRL1VAMIC,
+	AB8505_VSMPSAREGU,
+	AB8505_VSMPSBREGU,
+	AB8505_VSAFEREGU, /* NOTE! PRCMU register */
+	AB8505_VPLLVANAREGU,
+	AB8505_EXTSUPPLYREGU,
+	AB8505_VAUX12REGU,
+	AB8505_VRF1VAUX3REGU,
+	AB8505_VSMPSASEL1,
+	AB8505_VSMPSASEL2,
+	AB8505_VSMPSASEL3,
+	AB8505_VSMPSBSEL1,
+	AB8505_VSMPSBSEL2,
+	AB8505_VSMPSBSEL3,
+	AB8505_VSAFESEL1, /* NOTE! PRCMU register */
+	AB8505_VSAFESEL2, /* NOTE! PRCMU register */
+	AB8505_VSAFESEL3, /* NOTE! PRCMU register */
+	AB8505_VAUX1SEL,
+	AB8505_VAUX2SEL,
+	AB8505_VRF1VAUX3SEL,
+	AB8505_VAUX4REQCTRL,
+	AB8505_VAUX4REGU,
+	AB8505_VAUX4SEL,
+	AB8505_REGUCTRLDISCH,
+	AB8505_REGUCTRLDISCH2,
+	AB8505_REGUCTRLDISCH3,
+	AB8505_CTRLVAUX5,
+	AB8505_CTRLVAUX6,
+	AB8505_NUM_REGULATOR_REGISTERS,
+};
+
 /**
  * struct ab8500_shared_mode - is used when mode is shared between
  * two regulators.
diff --git a/drivers/regulator/atc260x-regulator.c b/drivers/regulator/atc260x-regulator.c
new file mode 100644
index 000000000000..d8b429955d33
--- /dev/null
+++ b/drivers/regulator/atc260x-regulator.c
@@ -0,0 +1,539 @@
+// SPDX-License-Identifier: GPL-2.0+
+//
+// Regulator driver for ATC260x PMICs
+//
+// Copyright (C) 2019 Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
+// Copyright (C) 2020 Cristian Ciocaltea <cristian.ciocaltea@gmail.com>
+
+#include <linux/mfd/atc260x/core.h>
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+
+struct atc260x_regulator_data {
+	int voltage_time_dcdc;
+	int voltage_time_ldo;
+};
+
+static const struct linear_range atc2603c_dcdc_voltage_ranges[] = {
+	REGULATOR_LINEAR_RANGE(1300000, 0, 13, 50000),
+	REGULATOR_LINEAR_RANGE(1950000, 14, 15, 100000),
+};
+
+static const struct linear_range atc2609a_dcdc_voltage_ranges[] = {
+	REGULATOR_LINEAR_RANGE(600000, 0, 127, 6250),
+	REGULATOR_LINEAR_RANGE(1400000, 128, 232, 25000),
+};
+
+static const struct linear_range atc2609a_ldo_voltage_ranges0[] = {
+	REGULATOR_LINEAR_RANGE(700000, 0, 15, 100000),
+	REGULATOR_LINEAR_RANGE(2100000, 16, 28, 100000),
+};
+
+static const struct linear_range atc2609a_ldo_voltage_ranges1[] = {
+	REGULATOR_LINEAR_RANGE(850000, 0, 15, 100000),
+	REGULATOR_LINEAR_RANGE(2100000, 16, 27, 100000),
+};
+
+static const unsigned int atc260x_ldo_voltage_range_sel[] = {
+	0x0, 0x1,
+};
+
+static int atc260x_dcdc_set_voltage_time_sel(struct regulator_dev *rdev,
+					     unsigned int old_selector,
+					     unsigned int new_selector)
+{
+	struct atc260x_regulator_data *data = rdev_get_drvdata(rdev);
+
+	if (new_selector > old_selector)
+		return data->voltage_time_dcdc;
+
+	return 0;
+}
+
+static int atc260x_ldo_set_voltage_time_sel(struct regulator_dev *rdev,
+					    unsigned int old_selector,
+					    unsigned int new_selector)
+{
+	struct atc260x_regulator_data *data = rdev_get_drvdata(rdev);
+
+	if (new_selector > old_selector)
+		return data->voltage_time_ldo;
+
+	return 0;
+}
+
+static const struct regulator_ops atc260x_dcdc_ops = {
+	.enable	= regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = atc260x_dcdc_set_voltage_time_sel,
+};
+
+static const struct regulator_ops atc260x_ldo_ops = {
+	.enable	= regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
+};
+
+static const struct regulator_ops atc260x_ldo_bypass_ops = {
+	.enable	= regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
+	.set_bypass = regulator_set_bypass_regmap,
+	.get_bypass = regulator_get_bypass_regmap,
+};
+
+static const struct regulator_ops atc260x_ldo_bypass_discharge_ops = {
+	.enable	= regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
+	.set_bypass = regulator_set_bypass_regmap,
+	.get_bypass = regulator_get_bypass_regmap,
+	.set_active_discharge = regulator_set_active_discharge_regmap,
+};
+
+static const struct regulator_ops atc260x_dcdc_range_ops = {
+	.enable	= regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = atc260x_dcdc_set_voltage_time_sel,
+};
+
+static const struct regulator_ops atc260x_ldo_range_pick_ops = {
+	.enable	= regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_pickable_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_pickable_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_pickable_regmap,
+	.set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
+};
+
+static const struct regulator_ops atc260x_dcdc_fixed_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = atc260x_dcdc_set_voltage_time_sel,
+};
+
+static const struct regulator_ops atc260x_ldo_fixed_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = atc260x_ldo_set_voltage_time_sel,
+};
+
+static const struct regulator_ops atc260x_no_ops = {
+};
+
+/*
+ * Note LDO8 is not documented in datasheet (v2.4), but supported
+ * in the vendor's driver implementation (xapp-le-kernel).
+ */
+enum atc2603c_reg_ids {
+	ATC2603C_ID_DCDC1,
+	ATC2603C_ID_DCDC2,
+	ATC2603C_ID_DCDC3,
+	ATC2603C_ID_LDO1,
+	ATC2603C_ID_LDO2,
+	ATC2603C_ID_LDO3,
+	ATC2603C_ID_LDO5,
+	ATC2603C_ID_LDO6,
+	ATC2603C_ID_LDO7,
+	ATC2603C_ID_LDO8,
+	ATC2603C_ID_LDO11,
+	ATC2603C_ID_LDO12,
+	ATC2603C_ID_SWITCHLDO1,
+	ATC2603C_ID_MAX,
+};
+
+#define atc2603c_reg_desc_dcdc(num, min, step, n_volt, vsel_h, vsel_l) { \
+	.name = "DCDC"#num, \
+	.supply_name = "dcdc"#num, \
+	.of_match = of_match_ptr("dcdc"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2603C_ID_DCDC##num, \
+	.ops = &atc260x_dcdc_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.min_uV = min, \
+	.uV_step = step, \
+	.n_voltages = n_volt, \
+	.vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \
+	.vsel_mask = GENMASK(vsel_h, vsel_l), \
+	.enable_reg = ATC2603C_PMU_DC##num##_CTL0, \
+	.enable_mask = BIT(15), \
+	.enable_time = 800, \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2603c_reg_desc_dcdc_range(num, vsel_h, vsel_l) { \
+	.name = "DCDC"#num, \
+	.supply_name = "dcdc"#num, \
+	.of_match = of_match_ptr("dcdc"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2603C_ID_DCDC##num, \
+	.ops = &atc260x_dcdc_range_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.n_voltages = 16, \
+	.linear_ranges = atc2603c_dcdc_voltage_ranges, \
+	.n_linear_ranges = ARRAY_SIZE(atc2603c_dcdc_voltage_ranges), \
+	.vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \
+	.vsel_mask = GENMASK(vsel_h, vsel_l), \
+	.enable_reg = ATC2603C_PMU_DC##num##_CTL0, \
+	.enable_mask = BIT(15), \
+	.enable_time = 800, \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2603c_reg_desc_dcdc_fixed(num, min, step, n_volt, vsel_h, vsel_l) { \
+	.name = "DCDC"#num, \
+	.supply_name = "dcdc"#num, \
+	.of_match = of_match_ptr("dcdc"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2603C_ID_DCDC##num, \
+	.ops = &atc260x_dcdc_fixed_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.min_uV = min, \
+	.uV_step = step, \
+	.n_voltages = n_volt, \
+	.vsel_reg = ATC2603C_PMU_DC##num##_CTL0, \
+	.vsel_mask = GENMASK(vsel_h, vsel_l), \
+	.enable_time = 800, \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2603c_reg_desc_ldo(num, min, step, n_volt, vsel_h, vsel_l) { \
+	.name = "LDO"#num, \
+	.supply_name = "ldo"#num, \
+	.of_match = of_match_ptr("ldo"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2603C_ID_LDO##num, \
+	.ops = &atc260x_ldo_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.min_uV = min, \
+	.uV_step = step, \
+	.n_voltages = n_volt, \
+	.vsel_reg = ATC2603C_PMU_LDO##num##_CTL, \
+	.vsel_mask = GENMASK(vsel_h, vsel_l), \
+	.enable_reg = ATC2603C_PMU_LDO##num##_CTL, \
+	.enable_mask = BIT(0), \
+	.enable_time = 2000, \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2603c_reg_desc_ldo_fixed(num, min, step, n_volt, vsel_h, vsel_l) { \
+	.name = "LDO"#num, \
+	.supply_name = "ldo"#num, \
+	.of_match = of_match_ptr("ldo"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2603C_ID_LDO##num, \
+	.ops = &atc260x_ldo_fixed_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.min_uV = min, \
+	.uV_step = step, \
+	.n_voltages = n_volt, \
+	.vsel_reg = ATC2603C_PMU_LDO##num##_CTL, \
+	.vsel_mask = GENMASK(vsel_h, vsel_l), \
+	.enable_time = 2000, \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2603c_reg_desc_ldo_noops(num, vfixed) { \
+	.name = "LDO"#num, \
+	.supply_name = "ldo"#num, \
+	.of_match = of_match_ptr("ldo"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2603C_ID_LDO##num, \
+	.ops = &atc260x_no_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.fixed_uV = vfixed, \
+	.n_voltages = 1, \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2603c_reg_desc_ldo_switch(num, min, step, n_volt, vsel_h, vsel_l) { \
+	.name = "SWITCHLDO"#num, \
+	.supply_name = "switchldo"#num, \
+	.of_match = of_match_ptr("switchldo"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2603C_ID_SWITCHLDO##num, \
+	.ops = &atc260x_ldo_bypass_discharge_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.min_uV = min, \
+	.uV_step = step, \
+	.n_voltages = n_volt, \
+	.vsel_reg = ATC2603C_PMU_SWITCH_CTL, \
+	.vsel_mask = GENMASK(vsel_h, vsel_l), \
+	.enable_reg = ATC2603C_PMU_SWITCH_CTL, \
+	.enable_mask = BIT(15), \
+	.enable_is_inverted = true, \
+	.enable_time = 2000, \
+	.bypass_reg = ATC2603C_PMU_SWITCH_CTL, \
+	.bypass_mask = BIT(5), \
+	.active_discharge_reg = ATC2603C_PMU_SWITCH_CTL, \
+	.active_discharge_mask = BIT(1), \
+	.owner = THIS_MODULE, \
+}
+
+static const struct regulator_desc atc2603c_reg[] = {
+	atc2603c_reg_desc_dcdc_fixed(1, 700000, 25000, 29, 11, 7),
+	atc2603c_reg_desc_dcdc_range(2, 12, 8),
+	atc2603c_reg_desc_dcdc_fixed(3, 2600000, 100000, 8, 11, 9),
+	atc2603c_reg_desc_ldo_fixed(1, 2600000, 100000, 8, 15, 13),
+	atc2603c_reg_desc_ldo_fixed(2, 2600000, 100000, 8, 15, 13),
+	atc2603c_reg_desc_ldo_fixed(3, 1500000, 100000, 6, 15, 13),
+	atc2603c_reg_desc_ldo(5, 2600000, 100000, 8, 15, 13),
+	atc2603c_reg_desc_ldo_fixed(6, 700000, 25000, 29, 15, 11),
+	atc2603c_reg_desc_ldo(7, 1500000, 100000, 6, 15, 13),
+	atc2603c_reg_desc_ldo(8, 2300000, 100000, 11, 15, 12),
+	atc2603c_reg_desc_ldo_fixed(11, 2600000, 100000, 8, 15, 13),
+	atc2603c_reg_desc_ldo_noops(12, 1800000),
+	atc2603c_reg_desc_ldo_switch(1, 3000000, 100000, 4, 4, 3),
+};
+
+static const struct regulator_desc atc2603c_reg_dcdc2_ver_b =
+	atc2603c_reg_desc_dcdc(2, 1000000, 50000, 18, 12, 8);
+
+enum atc2609a_reg_ids {
+	ATC2609A_ID_DCDC0,
+	ATC2609A_ID_DCDC1,
+	ATC2609A_ID_DCDC2,
+	ATC2609A_ID_DCDC3,
+	ATC2609A_ID_DCDC4,
+	ATC2609A_ID_LDO0,
+	ATC2609A_ID_LDO1,
+	ATC2609A_ID_LDO2,
+	ATC2609A_ID_LDO3,
+	ATC2609A_ID_LDO4,
+	ATC2609A_ID_LDO5,
+	ATC2609A_ID_LDO6,
+	ATC2609A_ID_LDO7,
+	ATC2609A_ID_LDO8,
+	ATC2609A_ID_LDO9,
+	ATC2609A_ID_MAX,
+};
+
+#define atc2609a_reg_desc_dcdc(num, en_bit) { \
+	.name = "DCDC"#num, \
+	.supply_name = "dcdc"#num, \
+	.of_match = of_match_ptr("dcdc"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2609A_ID_DCDC##num, \
+	.ops = &atc260x_dcdc_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.min_uV = 600000, \
+	.uV_step = 6250, \
+	.n_voltages = 256, \
+	.vsel_reg = ATC2609A_PMU_DC##num##_CTL0, \
+	.vsel_mask = GENMASK(15, 8), \
+	.enable_reg = ATC2609A_PMU_DC_OSC, \
+	.enable_mask = BIT(en_bit), \
+	.enable_time = 800, \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2609a_reg_desc_dcdc_range(num, en_bit) { \
+	.name = "DCDC"#num, \
+	.supply_name = "dcdc"#num, \
+	.of_match = of_match_ptr("dcdc"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2609A_ID_DCDC##num, \
+	.ops = &atc260x_dcdc_range_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.n_voltages = 233, \
+	.linear_ranges = atc2609a_dcdc_voltage_ranges, \
+	.n_linear_ranges = ARRAY_SIZE(atc2609a_dcdc_voltage_ranges), \
+	.vsel_reg = ATC2609A_PMU_DC##num##_CTL0, \
+	.vsel_mask = GENMASK(15, 8), \
+	.enable_reg = ATC2609A_PMU_DC_OSC, \
+	.enable_mask = BIT(en_bit), \
+	.enable_time = 800, \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2609a_reg_desc_ldo(num) { \
+	.name = "LDO"#num, \
+	.supply_name = "ldo"#num, \
+	.of_match = of_match_ptr("ldo"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2609A_ID_LDO##num, \
+	.ops = &atc260x_ldo_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.min_uV = 700000, \
+	.uV_step = 100000, \
+	.n_voltages = 16, \
+	.vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+	.vsel_mask = GENMASK(4, 1), \
+	.enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+	.enable_mask = BIT(0), \
+	.enable_time = 2000, \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2609a_reg_desc_ldo_bypass(num) { \
+	.name = "LDO"#num, \
+	.supply_name = "ldo"#num, \
+	.of_match = of_match_ptr("ldo"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2609A_ID_LDO##num, \
+	.ops = &atc260x_ldo_bypass_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.min_uV = 2300000, \
+	.uV_step = 100000, \
+	.n_voltages = 12, \
+	.vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+	.vsel_mask = GENMASK(5, 2), \
+	.enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+	.enable_mask = BIT(0), \
+	.enable_time = 2000, \
+	.bypass_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+	.bypass_mask = BIT(1), \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2609a_reg_desc_ldo_range_pick(num, n_range) { \
+	.name = "LDO"#num, \
+	.supply_name = "ldo"#num, \
+	.of_match = of_match_ptr("ldo"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2609A_ID_LDO##num, \
+	.ops = &atc260x_ldo_range_pick_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.linear_ranges = atc2609a_ldo_voltage_ranges##n_range, \
+	.n_linear_ranges = ARRAY_SIZE(atc2609a_ldo_voltage_ranges##n_range), \
+	.vsel_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+	.vsel_mask = GENMASK(4, 1), \
+	.vsel_range_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+	.vsel_range_mask = BIT(5), \
+	.linear_range_selectors = atc260x_ldo_voltage_range_sel, \
+	.enable_reg = ATC2609A_PMU_LDO##num##_CTL0, \
+	.enable_mask = BIT(0), \
+	.enable_time = 2000, \
+	.owner = THIS_MODULE, \
+}
+
+#define atc2609a_reg_desc_ldo_fixed(num) { \
+	.name = "LDO"#num, \
+	.supply_name = "ldo"#num, \
+	.of_match = of_match_ptr("ldo"#num), \
+	.regulators_node = of_match_ptr("regulators"), \
+	.id = ATC2609A_ID_LDO##num, \
+	.ops = &atc260x_ldo_fixed_ops, \
+	.type = REGULATOR_VOLTAGE, \
+	.min_uV = 2600000, \
+	.uV_step = 100000, \
+	.n_voltages = 8, \
+	.vsel_reg = ATC2609A_PMU_LDO##num##_CTL, \
+	.vsel_mask = GENMASK(15, 13), \
+	.enable_time = 2000, \
+	.owner = THIS_MODULE, \
+}
+
+static const struct regulator_desc atc2609a_reg[] = {
+	atc2609a_reg_desc_dcdc(0, 4),
+	atc2609a_reg_desc_dcdc(1, 5),
+	atc2609a_reg_desc_dcdc(2, 6),
+	atc2609a_reg_desc_dcdc_range(3, 7),
+	atc2609a_reg_desc_dcdc(4, 8),
+	atc2609a_reg_desc_ldo_bypass(0),
+	atc2609a_reg_desc_ldo_bypass(1),
+	atc2609a_reg_desc_ldo_bypass(2),
+	atc2609a_reg_desc_ldo_range_pick(3, 0),
+	atc2609a_reg_desc_ldo_range_pick(4, 0),
+	atc2609a_reg_desc_ldo(5),
+	atc2609a_reg_desc_ldo_range_pick(6, 1),
+	atc2609a_reg_desc_ldo_range_pick(7, 0),
+	atc2609a_reg_desc_ldo_range_pick(8, 0),
+	atc2609a_reg_desc_ldo_fixed(9),
+};
+
+static int atc260x_regulator_probe(struct platform_device *pdev)
+{
+	struct atc260x *atc260x = dev_get_drvdata(pdev->dev.parent);
+	struct device *dev = atc260x->dev;
+	struct atc260x_regulator_data *atc260x_data;
+	struct regulator_config config = {};
+	struct regulator_dev *atc260x_rdev;
+	const struct regulator_desc *regulators;
+	bool atc2603c_ver_b = false;
+	int i, nregulators;
+
+	atc260x_data = devm_kzalloc(&pdev->dev, sizeof(*atc260x_data), GFP_KERNEL);
+	if (!atc260x_data)
+		return -ENOMEM;
+
+	atc260x_data->voltage_time_dcdc = 350;
+	atc260x_data->voltage_time_ldo = 800;
+
+	switch (atc260x->ic_type) {
+	case ATC2603C:
+		regulators = atc2603c_reg;
+		nregulators = ATC2603C_ID_MAX;
+		atc2603c_ver_b = atc260x->ic_ver == ATC260X_B;
+		break;
+	case ATC2609A:
+		atc260x_data->voltage_time_dcdc = 250;
+		regulators = atc2609a_reg;
+		nregulators = ATC2609A_ID_MAX;
+		break;
+	default:
+		dev_err(dev, "unsupported ATC260X ID %d\n", atc260x->ic_type);
+		return -EINVAL;
+	}
+
+	config.dev = dev;
+	config.regmap = atc260x->regmap;
+	config.driver_data = atc260x_data;
+
+	/* Instantiate the regulators */
+	for (i = 0; i < nregulators; i++) {
+		if (atc2603c_ver_b && regulators[i].id == ATC2603C_ID_DCDC2)
+			atc260x_rdev = devm_regulator_register(&pdev->dev,
+							       &atc2603c_reg_dcdc2_ver_b,
+							       &config);
+		else
+			atc260x_rdev = devm_regulator_register(&pdev->dev,
+							       &regulators[i],
+							       &config);
+		if (IS_ERR(atc260x_rdev)) {
+			dev_err(dev, "failed to register regulator: %d\n", i);
+			return PTR_ERR(atc260x_rdev);
+		}
+	}
+
+	return 0;
+}
+
+static struct platform_driver atc260x_regulator_driver = {
+	.probe = atc260x_regulator_probe,
+	.driver = {
+		.name = "atc260x-regulator",
+	},
+};
+
+module_platform_driver(atc260x_regulator_driver);
+
+MODULE_DESCRIPTION("Regulator driver for ATC260x PMICs");
+MODULE_AUTHOR("Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>");
+MODULE_AUTHOR("Cristian Ciocaltea <cristian.ciocaltea@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/axp20x-regulator.c b/drivers/regulator/axp20x-regulator.c
index 90cb8445f721..d260c442b788 100644
--- a/drivers/regulator/axp20x-regulator.c
+++ b/drivers/regulator/axp20x-regulator.c
@@ -1070,7 +1070,7 @@ static int axp20x_set_dcdc_freq(struct platform_device *pdev, u32 dcdcfreq)
 static int axp20x_regulator_parse_dt(struct platform_device *pdev)
 {
 	struct device_node *np, *regulators;
-	int ret;
+	int ret = 0;
 	u32 dcdcfreq = 0;
 
 	np = of_node_get(pdev->dev.parent->of_node);
@@ -1085,13 +1085,12 @@ static int axp20x_regulator_parse_dt(struct platform_device *pdev)
 		ret = axp20x_set_dcdc_freq(pdev, dcdcfreq);
 		if (ret < 0) {
 			dev_err(&pdev->dev, "Error setting dcdc frequency: %d\n", ret);
-			return ret;
 		}
-
 		of_node_put(regulators);
 	}
 
-	return 0;
+	of_node_put(np);
+	return ret;
 }
 
 static int axp20x_set_dcdc_workmode(struct regulator_dev *rdev, int id, u32 workmode)
diff --git a/drivers/regulator/bd70528-regulator.c b/drivers/regulator/bd70528-regulator.c
index d44adf7e875a..1f5f9482b209 100644
--- a/drivers/regulator/bd70528-regulator.c
+++ b/drivers/regulator/bd70528-regulator.c
@@ -244,19 +244,14 @@ static const struct regulator_desc bd70528_desc[] = {
 
 static int bd70528_probe(struct platform_device *pdev)
 {
-	struct rohm_regmap_dev *bd70528;
 	int i;
 	struct regulator_config config = {
 		.dev = pdev->dev.parent,
 	};
 
-	bd70528 = dev_get_drvdata(pdev->dev.parent);
-	if (!bd70528) {
-		dev_err(&pdev->dev, "No MFD driver data\n");
-		return -EINVAL;
-	}
-
-	config.regmap = bd70528->regmap;
+	config.regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!config.regmap)
+		return -ENODEV;
 
 	for (i = 0; i < ARRAY_SIZE(bd70528_desc); i++) {
 		struct regulator_dev *rdev;
diff --git a/drivers/regulator/bd71828-regulator.c b/drivers/regulator/bd71828-regulator.c
index 85c0b9000963..6b12e963ed8f 100644
--- a/drivers/regulator/bd71828-regulator.c
+++ b/drivers/regulator/bd71828-regulator.c
@@ -749,19 +749,14 @@ static const struct bd71828_regulator_data bd71828_rdata[] = {
 
 static int bd71828_probe(struct platform_device *pdev)
 {
-	struct rohm_regmap_dev *bd71828;
 	int i, j, ret;
 	struct regulator_config config = {
 		.dev = pdev->dev.parent,
 	};
 
-	bd71828 = dev_get_drvdata(pdev->dev.parent);
-	if (!bd71828) {
-		dev_err(&pdev->dev, "No MFD driver data\n");
-		return -EINVAL;
-	}
-
-	config.regmap = bd71828->regmap;
+	config.regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!config.regmap)
+		return -ENODEV;
 
 	for (i = 0; i < ARRAY_SIZE(bd71828_rdata); i++) {
 		struct regulator_dev *rdev;
@@ -777,7 +772,7 @@ static int bd71828_probe(struct platform_device *pdev)
 			return PTR_ERR(rdev);
 		}
 		for (j = 0; j < rd->reg_init_amnt; j++) {
-			ret = regmap_update_bits(bd71828->regmap,
+			ret = regmap_update_bits(config.regmap,
 						 rd->reg_inits[j].reg,
 						 rd->reg_inits[j].mask,
 						 rd->reg_inits[j].val);
diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c
index 9309765d0450..8ff47ea522d6 100644
--- a/drivers/regulator/bd718x7-regulator.c
+++ b/drivers/regulator/bd718x7-regulator.c
@@ -1554,7 +1554,7 @@ err_out:
 
 static int bd718xx_probe(struct platform_device *pdev)
 {
-	struct bd718xx *mfd;
+	struct regmap *regmap;
 	struct regulator_config config = { 0 };
 	int i, j, err, omit_enable;
 	bool use_snvs;
@@ -1563,11 +1563,10 @@ static int bd718xx_probe(struct platform_device *pdev)
 	enum rohm_chip_type chip = platform_get_device_id(pdev)->driver_data;
 	const struct regulator_ops **swops, **hwops;
 
-	mfd = dev_get_drvdata(pdev->dev.parent);
-	if (!mfd) {
+	regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (!regmap) {
 		dev_err(&pdev->dev, "No MFD driver data\n");
-		err = -EINVAL;
-		goto err;
+		return -EINVAL;
 	}
 
 	switch (chip) {
@@ -1590,7 +1589,7 @@ static int bd718xx_probe(struct platform_device *pdev)
 	}
 
 	/* Register LOCK release */
-	err = regmap_update_bits(mfd->chip.regmap, BD718XX_REG_REGLOCK,
+	err = regmap_update_bits(regmap, BD718XX_REG_REGLOCK,
 				 (REGLOCK_PWRSEQ | REGLOCK_VREG), 0);
 	if (err) {
 		dev_err(&pdev->dev, "Failed to unlock PMIC (%d)\n", err);
@@ -1609,8 +1608,7 @@ static int bd718xx_probe(struct platform_device *pdev)
 	 * bit allowing HW defaults for power rails to be used
 	 */
 	if (!use_snvs) {
-		err = regmap_update_bits(mfd->chip.regmap,
-					 BD718XX_REG_TRANS_COND1,
+		err = regmap_update_bits(regmap, BD718XX_REG_TRANS_COND1,
 					 BD718XX_ON_REQ_POWEROFF_MASK |
 					 BD718XX_SWRESET_POWEROFF_MASK |
 					 BD718XX_WDOG_POWEROFF_MASK |
@@ -1626,7 +1624,7 @@ static int bd718xx_probe(struct platform_device *pdev)
 	}
 
 	config.dev = pdev->dev.parent;
-	config.regmap = mfd->chip.regmap;
+	config.regmap = regmap;
 	/*
 	 * There are cases when we want to leave the enable-control for
 	 * the HW state machine and use this driver only for voltage control.
@@ -1685,7 +1683,7 @@ static int bd718xx_probe(struct platform_device *pdev)
 		if (!no_enable_control && (!use_snvs ||
 		    !rdev->constraints->always_on ||
 		    !rdev->constraints->boot_on)) {
-			err = regmap_update_bits(mfd->chip.regmap, r->init.reg,
+			err = regmap_update_bits(regmap, r->init.reg,
 						 r->init.mask, r->init.val);
 			if (err) {
 				dev_err(&pdev->dev,
@@ -1695,7 +1693,7 @@ static int bd718xx_probe(struct platform_device *pdev)
 			}
 		}
 		for (j = 0; j < r->additional_init_amnt; j++) {
-			err = regmap_update_bits(mfd->chip.regmap,
+			err = regmap_update_bits(regmap,
 						 r->additional_inits[j].reg,
 						 r->additional_inits[j].mask,
 						 r->additional_inits[j].val);
diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c
index 67a768fe5b2a..16114aea099a 100644
--- a/drivers/regulator/core.c
+++ b/drivers/regulator/core.c
@@ -1617,7 +1617,7 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
 					  const char *supply_name)
 {
 	struct regulator *regulator;
-	int err;
+	int err = 0;
 
 	if (dev) {
 		char buf[REG_STR_SIZE];
@@ -1663,8 +1663,8 @@ static struct regulator *create_regulator(struct regulator_dev *rdev,
 		}
 	}
 
-	regulator->debugfs = debugfs_create_dir(supply_name,
-						rdev->debugfs);
+	if (err != -EEXIST)
+		regulator->debugfs = debugfs_create_dir(supply_name, rdev->debugfs);
 	if (!regulator->debugfs) {
 		rdev_dbg(rdev, "Failed to create debugfs directory\n");
 	} else {
@@ -2042,7 +2042,7 @@ struct regulator *_regulator_get(struct device *dev, const char *id,
  * Returns a struct regulator corresponding to the regulator producer,
  * or IS_ERR() condition containing errno.
  *
- * Use of supply names configured via regulator_set_device_supply() is
+ * Use of supply names configured via set_consumer_device_supply() is
  * strongly encouraged.  It is recommended that the supply name used
  * should match the name used for the supply and/or the relevant
  * device pins in the datasheet.
@@ -2069,7 +2069,7 @@ EXPORT_SYMBOL_GPL(regulator_get);
  * regulator off for correct operation of the hardware they are
  * controlling.
  *
- * Use of supply names configured via regulator_set_device_supply() is
+ * Use of supply names configured via set_consumer_device_supply() is
  * strongly encouraged.  It is recommended that the supply name used
  * should match the name used for the supply and/or the relevant
  * device pins in the datasheet.
@@ -2095,7 +2095,7 @@ EXPORT_SYMBOL_GPL(regulator_get_exclusive);
  * disrupting the operation of drivers that can handle absent
  * supplies.
  *
- * Use of supply names configured via regulator_set_device_supply() is
+ * Use of supply names configured via set_consumer_device_supply() is
  * strongly encouraged.  It is recommended that the supply name used
  * should match the name used for the supply and/or the relevant
  * device pins in the datasheet.
@@ -4153,7 +4153,11 @@ int regulator_sync_voltage(struct regulator *regulator)
 	if (ret < 0)
 		goto out;
 
-	ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
+	/* balance only, if regulator is coupled */
+	if (rdev->coupling_desc.n_coupled > 1)
+		ret = regulator_balance_voltage(rdev, PM_SUSPEND_ON);
+	else
+		ret = _regulator_do_set_voltage(rdev, min_uV, max_uV);
 
 out:
 	regulator_unlock(rdev);
diff --git a/drivers/regulator/mcp16502.c b/drivers/regulator/mcp16502.c
index 74ad92dc664a..88c6bd5b6c78 100644
--- a/drivers/regulator/mcp16502.c
+++ b/drivers/regulator/mcp16502.c
@@ -550,7 +550,7 @@ static int mcp16502_probe(struct i2c_client *client,
 	config.regmap = rmap;
 	config.driver_data = mcp;
 
-	mcp->lpm = devm_gpiod_get(dev, "lpm", GPIOD_OUT_LOW);
+	mcp->lpm = devm_gpiod_get_optional(dev, "lpm", GPIOD_OUT_LOW);
 	if (IS_ERR(mcp->lpm)) {
 		dev_err(dev, "failed to get lpm pin: %ld\n", PTR_ERR(mcp->lpm));
 		return PTR_ERR(mcp->lpm);
diff --git a/drivers/regulator/mt6315-regulator.c b/drivers/regulator/mt6315-regulator.c
new file mode 100644
index 000000000000..d49a1534d8e9
--- /dev/null
+++ b/drivers/regulator/mt6315-regulator.c
@@ -0,0 +1,299 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2021 MediaTek Inc.
+
+#include <linux/module.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/machine.h>
+#include <linux/regulator/mt6315-regulator.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/spmi.h>
+
+#define MT6315_BUCK_MODE_AUTO		0
+#define MT6315_BUCK_MODE_FORCE_PWM	1
+#define MT6315_BUCK_MODE_LP		2
+
+struct mt6315_regulator_info {
+	struct regulator_desc desc;
+	u32 status_reg;
+	u32 lp_mode_mask;
+	u32 lp_mode_shift;
+};
+
+struct mt_regulator_init_data {
+	u32 modeset_mask[MT6315_VBUCK_MAX];
+};
+
+struct mt6315_chip {
+	struct device *dev;
+	struct regmap *regmap;
+};
+
+#define MT_BUCK(_name, _bid, _vsel)				\
+[_bid] = {							\
+	.desc = {						\
+		.name = _name,					\
+		.of_match = of_match_ptr(_name),		\
+		.regulators_node = "regulators",		\
+		.ops = &mt6315_volt_range_ops,			\
+		.type = REGULATOR_VOLTAGE,			\
+		.id = _bid,					\
+		.owner = THIS_MODULE,				\
+		.n_voltages = 0xbf,				\
+		.linear_ranges = mt_volt_range1,		\
+		.n_linear_ranges = ARRAY_SIZE(mt_volt_range1),	\
+		.vsel_reg = _vsel,				\
+		.vsel_mask = 0xff,				\
+		.enable_reg = MT6315_BUCK_TOP_CON0,		\
+		.enable_mask = BIT(_bid),			\
+		.of_map_mode = mt6315_map_mode,			\
+	},							\
+	.status_reg = _bid##_DBG4,				\
+	.lp_mode_mask = BIT(_bid),				\
+	.lp_mode_shift = _bid,					\
+}
+
+static const struct linear_range mt_volt_range1[] = {
+	REGULATOR_LINEAR_RANGE(0, 0, 0xbf, 6250),
+};
+
+static unsigned int mt6315_map_mode(u32 mode)
+{
+	switch (mode) {
+	case MT6315_BUCK_MODE_AUTO:
+		return REGULATOR_MODE_NORMAL;
+	case MT6315_BUCK_MODE_FORCE_PWM:
+		return REGULATOR_MODE_FAST;
+	case MT6315_BUCK_MODE_LP:
+		return REGULATOR_MODE_IDLE;
+	default:
+		return -EINVAL;
+	}
+}
+
+static unsigned int mt6315_regulator_get_mode(struct regulator_dev *rdev)
+{
+	struct mt_regulator_init_data *init = rdev_get_drvdata(rdev);
+	const struct mt6315_regulator_info *info;
+	int ret, regval;
+	u32 modeset_mask;
+
+	info = container_of(rdev->desc, struct mt6315_regulator_info, desc);
+	modeset_mask = init->modeset_mask[rdev_get_id(rdev)];
+	ret = regmap_read(rdev->regmap, MT6315_BUCK_TOP_4PHASE_ANA_CON42, &regval);
+	if (ret != 0) {
+		dev_notice(&rdev->dev, "Failed to get mode: %d\n", ret);
+		return ret;
+	}
+
+	if ((regval & modeset_mask) == modeset_mask)
+		return REGULATOR_MODE_FAST;
+
+	ret = regmap_read(rdev->regmap, MT6315_BUCK_TOP_CON1, &regval);
+	if (ret != 0) {
+		dev_notice(&rdev->dev, "Failed to get lp mode: %d\n", ret);
+		return ret;
+	}
+
+	if (regval & info->lp_mode_mask)
+		return REGULATOR_MODE_IDLE;
+	else
+		return REGULATOR_MODE_NORMAL;
+}
+
+static int mt6315_regulator_set_mode(struct regulator_dev *rdev,
+				     u32 mode)
+{
+	struct mt_regulator_init_data *init = rdev_get_drvdata(rdev);
+	const struct mt6315_regulator_info *info;
+	int ret, val, curr_mode;
+	u32 modeset_mask;
+
+	info = container_of(rdev->desc, struct mt6315_regulator_info, desc);
+	modeset_mask = init->modeset_mask[rdev_get_id(rdev)];
+	curr_mode = mt6315_regulator_get_mode(rdev);
+	switch (mode) {
+	case REGULATOR_MODE_FAST:
+		ret = regmap_update_bits(rdev->regmap,
+					 MT6315_BUCK_TOP_4PHASE_ANA_CON42,
+					 modeset_mask,
+					 modeset_mask);
+		break;
+	case REGULATOR_MODE_NORMAL:
+		if (curr_mode == REGULATOR_MODE_FAST) {
+			ret = regmap_update_bits(rdev->regmap,
+						 MT6315_BUCK_TOP_4PHASE_ANA_CON42,
+						 modeset_mask,
+						 0);
+		} else if (curr_mode == REGULATOR_MODE_IDLE) {
+			ret = regmap_update_bits(rdev->regmap,
+						 MT6315_BUCK_TOP_CON1,
+						 info->lp_mode_mask,
+						 0);
+			usleep_range(100, 110);
+		} else {
+			ret = -EINVAL;
+		}
+		break;
+	case REGULATOR_MODE_IDLE:
+		val = MT6315_BUCK_MODE_LP >> 1;
+		val <<= info->lp_mode_shift;
+		ret = regmap_update_bits(rdev->regmap,
+					 MT6315_BUCK_TOP_CON1,
+					 info->lp_mode_mask,
+					 val);
+		break;
+	default:
+		ret = -EINVAL;
+		dev_notice(&rdev->dev, "Unsupported mode: %d\n", mode);
+		break;
+	}
+
+	if (ret != 0) {
+		dev_notice(&rdev->dev, "Failed to set mode: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+}
+
+static int mt6315_get_status(struct regulator_dev *rdev)
+{
+	const struct mt6315_regulator_info *info;
+	int ret;
+	u32 regval;
+
+	info = container_of(rdev->desc, struct mt6315_regulator_info, desc);
+	ret = regmap_read(rdev->regmap, info->status_reg, &regval);
+	if (ret < 0) {
+		dev_notice(&rdev->dev, "Failed to get enable reg: %d\n", ret);
+		return ret;
+	}
+
+	return (regval & BIT(0)) ? REGULATOR_STATUS_ON : REGULATOR_STATUS_OFF;
+}
+
+static const struct regulator_ops mt6315_volt_range_ops = {
+	.list_voltage = regulator_list_voltage_linear_range,
+	.map_voltage = regulator_map_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_voltage_time_sel = regulator_set_voltage_time_sel,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.get_status = mt6315_get_status,
+	.set_mode = mt6315_regulator_set_mode,
+	.get_mode = mt6315_regulator_get_mode,
+};
+
+static const struct mt6315_regulator_info mt6315_regulators[MT6315_VBUCK_MAX] = {
+	MT_BUCK("vbuck1", MT6315_VBUCK1, MT6315_BUCK_TOP_ELR0),
+	MT_BUCK("vbuck2", MT6315_VBUCK2, MT6315_BUCK_TOP_ELR2),
+	MT_BUCK("vbuck3", MT6315_VBUCK3, MT6315_BUCK_TOP_ELR4),
+	MT_BUCK("vbuck4", MT6315_VBUCK4, MT6315_BUCK_TOP_ELR6),
+};
+
+static const struct regmap_config mt6315_regmap_config = {
+	.reg_bits	= 16,
+	.val_bits	= 8,
+	.max_register	= 0x16d0,
+	.fast_io	= true,
+};
+
+static const struct of_device_id mt6315_of_match[] = {
+	{
+		.compatible = "mediatek,mt6315-regulator",
+	}, {
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(of, mt6315_of_match);
+
+static int mt6315_regulator_probe(struct spmi_device *pdev)
+{
+	struct device *dev = &pdev->dev;
+	struct regmap *regmap;
+	struct mt6315_chip *chip;
+	struct mt_regulator_init_data *init_data;
+	struct regulator_config config = {};
+	struct regulator_dev *rdev;
+	int i;
+
+	regmap = devm_regmap_init_spmi_ext(pdev, &mt6315_regmap_config);
+	if (!regmap)
+		return -ENODEV;
+
+	chip = devm_kzalloc(dev, sizeof(struct mt6315_chip), GFP_KERNEL);
+	if (!chip)
+		return -ENOMEM;
+
+	init_data = devm_kzalloc(dev, sizeof(struct mt_regulator_init_data), GFP_KERNEL);
+	if (!init_data)
+		return -ENOMEM;
+
+	switch (pdev->usid) {
+	case MT6315_PP:
+		init_data->modeset_mask[MT6315_VBUCK1] = BIT(MT6315_VBUCK1) | BIT(MT6315_VBUCK2) |
+							 BIT(MT6315_VBUCK4);
+		break;
+	case MT6315_SP:
+	case MT6315_RP:
+		init_data->modeset_mask[MT6315_VBUCK1] = BIT(MT6315_VBUCK1) | BIT(MT6315_VBUCK2);
+		break;
+	default:
+		init_data->modeset_mask[MT6315_VBUCK1] = BIT(MT6315_VBUCK1);
+		break;
+	}
+	for (i = MT6315_VBUCK2; i < MT6315_VBUCK_MAX; i++)
+		init_data->modeset_mask[i] = BIT(i);
+
+	chip->dev = dev;
+	chip->regmap = regmap;
+	dev_set_drvdata(dev, chip);
+
+	config.dev = dev;
+	config.regmap = regmap;
+	for (i = MT6315_VBUCK1; i < MT6315_VBUCK_MAX; i++) {
+		config.driver_data = init_data;
+		rdev = devm_regulator_register(dev, &mt6315_regulators[i].desc, &config);
+		if (IS_ERR(rdev)) {
+			dev_notice(dev, "Failed to register %s\n", mt6315_regulators[i].desc.name);
+			continue;
+		}
+	}
+
+	return 0;
+}
+
+static void mt6315_regulator_shutdown(struct spmi_device *pdev)
+{
+	struct mt6315_chip *chip = dev_get_drvdata(&pdev->dev);
+	int ret = 0;
+
+	ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY_H, PROTECTION_KEY_H);
+	ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY, PROTECTION_KEY);
+	ret |= regmap_update_bits(chip->regmap, MT6315_TOP2_ELR7, 1, 1);
+	ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY, 0);
+	ret |= regmap_write(chip->regmap, MT6315_TOP_TMA_KEY_H, 0);
+	if (ret < 0)
+		dev_notice(&pdev->dev, "[%#x] Failed to enable power off sequence. %d\n",
+			   pdev->usid, ret);
+}
+
+static struct spmi_driver mt6315_regulator_driver = {
+	.driver		= {
+		.name	= "mt6315-regulator",
+		.of_match_table = mt6315_of_match,
+	},
+	.probe = mt6315_regulator_probe,
+	.shutdown = mt6315_regulator_shutdown,
+};
+
+module_spmi_driver(mt6315_regulator_driver);
+
+MODULE_AUTHOR("Hsin-Hsiung Wang <hsin-hsiung.wang@mediatek.com>");
+MODULE_DESCRIPTION("Regulator Driver for MediaTek MT6315 PMIC");
+MODULE_LICENSE("GPL");
diff --git a/drivers/regulator/mtk-dvfsrc-regulator.c b/drivers/regulator/mtk-dvfsrc-regulator.c
new file mode 100644
index 000000000000..d3d876198d6e
--- /dev/null
+++ b/drivers/regulator/mtk-dvfsrc-regulator.c
@@ -0,0 +1,215 @@
+// SPDX-License-Identifier: GPL-2.0
+//
+// Copyright (c) 2020 MediaTek Inc.
+
+#include <linux/err.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of_device.h>
+#include <linux/of_platform.h>
+#include <linux/regulator/driver.h>
+#include <linux/regulator/of_regulator.h>
+#include <linux/soc/mediatek/mtk_dvfsrc.h>
+
+#define DVFSRC_ID_VCORE		0
+#define DVFSRC_ID_VSCP		1
+
+#define MT_DVFSRC_REGULAR(match, _name,	_volt_table)	\
+[DVFSRC_ID_##_name] = {					\
+	.desc = {					\
+		.name = match,				\
+		.of_match = of_match_ptr(match),	\
+		.ops = &dvfsrc_vcore_ops,		\
+		.type = REGULATOR_VOLTAGE,		\
+		.id = DVFSRC_ID_##_name,		\
+		.owner = THIS_MODULE,			\
+		.n_voltages = ARRAY_SIZE(_volt_table),	\
+		.volt_table = _volt_table,		\
+	},	\
+}
+
+/*
+ * DVFSRC regulators' information
+ *
+ * @desc: standard fields of regulator description.
+ * @voltage_selector:  Selector used for get_voltage_sel() and
+ *			   set_voltage_sel() callbacks
+ */
+
+struct dvfsrc_regulator {
+	struct regulator_desc	desc;
+};
+
+/*
+ * MTK DVFSRC regulators' init data
+ *
+ * @size: num of regulators
+ * @regulator_info: regulator info.
+ */
+struct dvfsrc_regulator_init_data {
+	u32 size;
+	struct dvfsrc_regulator *regulator_info;
+};
+
+static inline struct device *to_dvfsrc_dev(struct regulator_dev *rdev)
+{
+	return rdev_get_dev(rdev)->parent;
+}
+
+static int dvfsrc_set_voltage_sel(struct regulator_dev *rdev,
+				  unsigned int selector)
+{
+	struct device *dvfsrc_dev = to_dvfsrc_dev(rdev);
+	int id = rdev_get_id(rdev);
+
+	if (id == DVFSRC_ID_VCORE)
+		mtk_dvfsrc_send_request(dvfsrc_dev,
+					MTK_DVFSRC_CMD_VCORE_REQUEST,
+					selector);
+	else if (id == DVFSRC_ID_VSCP)
+		mtk_dvfsrc_send_request(dvfsrc_dev,
+					MTK_DVFSRC_CMD_VSCP_REQUEST,
+					selector);
+	else
+		return -EINVAL;
+
+	return 0;
+}
+
+static int dvfsrc_get_voltage_sel(struct regulator_dev *rdev)
+{
+	struct device *dvfsrc_dev = to_dvfsrc_dev(rdev);
+	int id = rdev_get_id(rdev);
+	int val, ret;
+
+	if (id == DVFSRC_ID_VCORE)
+		ret = mtk_dvfsrc_query_info(dvfsrc_dev,
+					    MTK_DVFSRC_CMD_VCORE_LEVEL_QUERY,
+					    &val);
+	else if (id == DVFSRC_ID_VSCP)
+		ret = mtk_dvfsrc_query_info(dvfsrc_dev,
+					    MTK_DVFSRC_CMD_VSCP_LEVEL_QUERY,
+					    &val);
+	else
+		return -EINVAL;
+
+	if (ret != 0)
+		return ret;
+
+	return val;
+}
+
+static const struct regulator_ops dvfsrc_vcore_ops = {
+	.list_voltage = regulator_list_voltage_table,
+	.get_voltage_sel = dvfsrc_get_voltage_sel,
+	.set_voltage_sel = dvfsrc_set_voltage_sel,
+};
+
+static const unsigned int mt8183_voltages[] = {
+	725000,
+	800000,
+};
+
+static struct dvfsrc_regulator mt8183_regulators[] = {
+	MT_DVFSRC_REGULAR("dvfsrc-vcore", VCORE,
+			  mt8183_voltages),
+};
+
+static const struct dvfsrc_regulator_init_data regulator_mt8183_data = {
+	.size = ARRAY_SIZE(mt8183_regulators),
+	.regulator_info = &mt8183_regulators[0],
+};
+
+static const unsigned int mt6873_voltages[] = {
+	575000,
+	600000,
+	650000,
+	725000,
+};
+
+static struct dvfsrc_regulator mt6873_regulators[] = {
+	MT_DVFSRC_REGULAR("dvfsrc-vcore", VCORE,
+			  mt6873_voltages),
+	MT_DVFSRC_REGULAR("dvfsrc-vscp", VSCP,
+			  mt6873_voltages),
+};
+
+static const struct dvfsrc_regulator_init_data regulator_mt6873_data = {
+	.size = ARRAY_SIZE(mt6873_regulators),
+	.regulator_info = &mt6873_regulators[0],
+};
+
+static const struct of_device_id mtk_dvfsrc_regulator_match[] = {
+	{
+		.compatible = "mediatek,mt8183-dvfsrc",
+		.data = &regulator_mt8183_data,
+	}, {
+		.compatible = "mediatek,mt8192-dvfsrc",
+		.data = &regulator_mt6873_data,
+	}, {
+		.compatible = "mediatek,mt6873-dvfsrc",
+		.data = &regulator_mt6873_data,
+	}, {
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(of, mtk_dvfsrc_regulator_match);
+
+static int dvfsrc_vcore_regulator_probe(struct platform_device *pdev)
+{
+	const struct of_device_id *match;
+	struct device *dev = &pdev->dev;
+	struct regulator_config config = { };
+	struct regulator_dev *rdev;
+	const struct dvfsrc_regulator_init_data *regulator_init_data;
+	struct dvfsrc_regulator *mt_regulators;
+	int i;
+
+	match = of_match_node(mtk_dvfsrc_regulator_match, dev->parent->of_node);
+
+	if (!match) {
+		dev_err(dev, "invalid compatible string\n");
+		return -ENODEV;
+	}
+
+	regulator_init_data = match->data;
+
+	mt_regulators = regulator_init_data->regulator_info;
+	for (i = 0; i < regulator_init_data->size; i++) {
+		config.dev = dev->parent;
+		config.driver_data = (mt_regulators + i);
+		rdev = devm_regulator_register(dev->parent,
+					       &(mt_regulators + i)->desc,
+					       &config);
+		if (IS_ERR(rdev)) {
+			dev_err(dev, "failed to register %s\n",
+				(mt_regulators + i)->desc.name);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return 0;
+}
+
+static struct platform_driver mtk_dvfsrc_regulator_driver = {
+	.driver = {
+		.name  = "mtk-dvfsrc-regulator",
+	},
+	.probe = dvfsrc_vcore_regulator_probe,
+};
+
+static int __init mtk_dvfsrc_regulator_init(void)
+{
+	return platform_driver_register(&mtk_dvfsrc_regulator_driver);
+}
+subsys_initcall(mtk_dvfsrc_regulator_init);
+
+static void __exit mtk_dvfsrc_regulator_exit(void)
+{
+	platform_driver_unregister(&mtk_dvfsrc_regulator_driver);
+}
+module_exit(mtk_dvfsrc_regulator_exit);
+
+MODULE_AUTHOR("Arvin wang <arvin.wang@mediatek.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/pca9450-regulator.c b/drivers/regulator/pca9450-regulator.c
index cb29421d745a..833d398c6aa2 100644
--- a/drivers/regulator/pca9450-regulator.c
+++ b/drivers/regulator/pca9450-regulator.c
@@ -5,6 +5,7 @@
  */
 
 #include <linux/err.h>
+#include <linux/gpio/consumer.h>
 #include <linux/i2c.h>
 #include <linux/interrupt.h>
 #include <linux/kernel.h>
@@ -32,6 +33,7 @@ struct pca9450_regulator_desc {
 struct pca9450 {
 	struct device *dev;
 	struct regmap *regmap;
+	struct gpio_desc *sd_vsel_gpio;
 	enum pca9450_chip_type type;
 	unsigned int rcnt;
 	int irq;
@@ -795,6 +797,26 @@ static int pca9450_i2c_probe(struct i2c_client *i2c,
 		return ret;
 	}
 
+	/* Set reset behavior on assertion of WDOG_B signal */
+	ret = regmap_update_bits(pca9450->regmap, PCA9450_REG_RESET_CTRL,
+				WDOG_B_CFG_MASK, WDOG_B_CFG_COLD_LDO12);
+	if (ret) {
+		dev_err(&i2c->dev, "Failed to set WDOG_B reset behavior\n");
+		return ret;
+	}
+
+	/*
+	 * The driver uses the LDO5CTRL_H register to control the LDO5 regulator.
+	 * This is only valid if the SD_VSEL input of the PMIC is high. Let's
+	 * check if the pin is available as GPIO and set it to high.
+	 */
+	pca9450->sd_vsel_gpio = gpiod_get_optional(pca9450->dev, "sd-vsel", GPIOD_OUT_HIGH);
+
+	if (IS_ERR(pca9450->sd_vsel_gpio)) {
+		dev_err(&i2c->dev, "Failed to get SD_VSEL GPIO\n");
+		return ret;
+	}
+
 	dev_info(&i2c->dev, "%s probed.\n",
 		type == PCA9450_TYPE_PCA9450A ? "pca9450a" : "pca9450bc");
 
diff --git a/drivers/regulator/pf8x00-regulator.c b/drivers/regulator/pf8x00-regulator.c
index af9918cd27aa..9b28bd63208d 100644
--- a/drivers/regulator/pf8x00-regulator.c
+++ b/drivers/regulator/pf8x00-regulator.c
@@ -114,7 +114,6 @@ enum swxilim_bits {
 #define PF8X00_SWXILIM_SHIFT		3
 #define PF8X00_SWXILIM_MASK		GENMASK(4, 3)
 #define PF8X00_SWXPHASE_MASK		GENMASK(2, 0)
-#define PF8X00_SWXPHASE_DEFAULT		0
 #define PF8X00_SWXPHASE_SHIFT		7
 
 enum pf8x00_devid {
@@ -126,10 +125,12 @@ enum pf8x00_devid {
 #define PF8X00_DEVICE_FAM_MASK		GENMASK(7, 4)
 #define PF8X00_DEVICE_ID_MASK		GENMASK(3, 0)
 
-struct pf8x00_regulator {
+struct pf8x00_regulator_data {
 	struct regulator_desc desc;
-	u8 ilim;
-	u8 phase_shift;
+	unsigned int suspend_enable_reg;
+	unsigned int suspend_enable_mask;
+	unsigned int suspend_voltage_reg;
+	unsigned int suspend_voltage_cache;
 };
 
 struct pf8x00_chip {
@@ -150,35 +151,16 @@ static const int pf8x00_ldo_voltages[] = {
 	3100000, 3150000, 3200000, 3300000, 3350000, 1650000, 1700000, 5000000,
 };
 
-#define SWV(i)		(6250 * i + 400000)
-#define SWV_LINE(i)	SWV(i*8+0), SWV(i*8+1), SWV(i*8+2), SWV(i*8+3), \
-			SWV(i*8+4), SWV(i*8+5), SWV(i*8+6), SWV(i*8+7)
+/* Output: 2.1A to 4.5A */
+static const unsigned int pf8x00_sw_current_table[] = {
+	2100000, 2600000, 3000000, 4500000,
+};
 
 /* Output: 0.4V to 1.8V */
-static const int pf8x00_sw1_to_6_voltages[] = {
-	SWV_LINE(0),
-	SWV_LINE(1),
-	SWV_LINE(2),
-	SWV_LINE(3),
-	SWV_LINE(4),
-	SWV_LINE(5),
-	SWV_LINE(6),
-	SWV_LINE(7),
-	SWV_LINE(8),
-	SWV_LINE(9),
-	SWV_LINE(10),
-	SWV_LINE(11),
-	SWV_LINE(12),
-	SWV_LINE(13),
-	SWV_LINE(14),
-	SWV_LINE(15),
-	SWV_LINE(16),
-	SWV_LINE(17),
-	SWV_LINE(18),
-	SWV_LINE(19),
-	SWV_LINE(20),
-	SWV_LINE(21),
-	1500000, 1800000,
+#define PF8XOO_SW1_6_VOLTAGE_NUM 0xB2
+static const struct linear_range pf8x00_sw1_to_6_voltages[] = {
+	REGULATOR_LINEAR_RANGE(400000, 0x00, 0xB0, 6250),
+	REGULATOR_LINEAR_RANGE(1800000, 0xB1, 0xB1, 0),
 };
 
 /* Output: 1.0V to 4.1V */
@@ -194,15 +176,10 @@ static const int pf8x00_vsnvs_voltages[] = {
 	0, 1800000, 3000000, 3300000,
 };
 
-static struct pf8x00_regulator *desc_to_regulator(const struct regulator_desc *desc)
-{
-	return container_of(desc, struct pf8x00_regulator, desc);
-}
-
-static void swxilim_select(const struct regulator_desc *desc, int ilim)
+static void swxilim_select(struct pf8x00_chip *chip, int id, int ilim)
 {
-	struct pf8x00_regulator *data = desc_to_regulator(desc);
 	u8 ilim_sel;
+	u8 reg = PF8X00_SW_BASE(id) + SW_CONFIG2;
 
 	switch (ilim) {
 	case 2100:
@@ -222,43 +199,130 @@ static void swxilim_select(const struct regulator_desc *desc, int ilim)
 		break;
 	}
 
-	data->ilim = ilim_sel;
+	regmap_update_bits(chip->regmap, reg,
+					PF8X00_SWXILIM_MASK,
+					ilim_sel << PF8X00_SWXILIM_SHIFT);
 }
 
-static int pf8x00_of_parse_cb(struct device_node *np,
+static void handle_ilim_property(struct device_node *np,
 			      const struct regulator_desc *desc,
 			      struct regulator_config *config)
 {
-	struct pf8x00_regulator *data = desc_to_regulator(desc);
 	struct pf8x00_chip *chip = config->driver_data;
+	int ret;
+	int val;
+
+	if ((desc->id >= PF8X00_BUCK1) && (desc->id <= PF8X00_BUCK7)) {
+		ret = of_property_read_u32(np, "nxp,ilim-ma", &val);
+		if (ret) {
+			dev_dbg(chip->dev, "unspecified ilim for BUCK%d, use value stored in OTP\n",
+				desc->id - PF8X00_LDO4);
+			return;
+		}
+
+		dev_warn(chip->dev, "nxp,ilim-ma is deprecated, please use regulator-max-microamp\n");
+		swxilim_select(chip, desc->id, val);
+
+	} else
+		dev_warn(chip->dev, "nxp,ilim-ma used with incorrect regulator (%d)\n", desc->id);
+}
+
+static void handle_shift_property(struct device_node *np,
+			      const struct regulator_desc *desc,
+			      struct regulator_config *config)
+{
+	unsigned char id = desc->id - PF8X00_LDO4;
+	unsigned char reg = PF8X00_SW_BASE(id) + SW_CONFIG2;
+	struct pf8x00_chip *chip = config->driver_data;
+
 	int phase;
 	int val;
 	int ret;
+	if ((desc->id >= PF8X00_BUCK1) && (desc->id <= PF8X00_BUCK7)) {
+		ret = of_property_read_u32(np, "nxp,phase-shift", &val);
+		if (ret) {
+			dev_dbg(chip->dev,
+				"unspecified phase-shift for BUCK%d, using OTP configuration\n",
+				id);
+			return;
+		}
 
-	ret = of_property_read_u32(np, "nxp,ilim-ma", &val);
-	if (ret)
-		dev_dbg(chip->dev, "unspecified ilim for BUCK%d, use 2100 mA\n",
-			desc->id - PF8X00_LDO4);
+		if (val < 0 || val > 315 || val % 45 != 0) {
+			dev_warn(config->dev,
+				"invalid phase_shift %d for BUCK%d, using OTP configuration\n",
+				val, id);
+			return;
+		}
 
-	swxilim_select(desc, val);
+		phase = val / 45;
 
-	ret = of_property_read_u32(np, "nxp,phase-shift", &val);
-	if (ret) {
-		dev_dbg(chip->dev,
-			"unspecified phase-shift for BUCK%d, use 0 degrees\n",
-			desc->id - PF8X00_LDO4);
-		val = PF8X00_SWXPHASE_DEFAULT;
+		if (phase >= 1)
+			phase -= 1;
+		else
+			phase = PF8X00_SWXPHASE_SHIFT;
+
+		regmap_update_bits(chip->regmap, reg,
+				PF8X00_SWXPHASE_MASK,
+				phase);
+	} else
+		dev_warn(chip->dev, "nxp,phase-shift used with incorrect regulator (%d)\n", id);
+
+}
+
+static int pf8x00_of_parse_cb(struct device_node *np,
+			      const struct regulator_desc *desc,
+			      struct regulator_config *config)
+{
+
+	handle_ilim_property(np, desc, config);
+	handle_shift_property(np, desc, config);
+
+	return 0;
+}
+
+static int pf8x00_suspend_enable(struct regulator_dev *rdev)
+{
+	struct pf8x00_regulator_data *regl = rdev_get_drvdata(rdev);
+	struct regmap *rmap = rdev_get_regmap(rdev);
+
+	return regmap_update_bits(rmap, regl->suspend_enable_reg,
+				  regl->suspend_enable_mask,
+				  regl->suspend_enable_mask);
+}
+
+static int pf8x00_suspend_disable(struct regulator_dev *rdev)
+{
+	struct pf8x00_regulator_data *regl = rdev_get_drvdata(rdev);
+	struct regmap *rmap = rdev_get_regmap(rdev);
+
+	return regmap_update_bits(rmap, regl->suspend_enable_reg,
+				  regl->suspend_enable_mask, 0);
+}
+
+static int pf8x00_set_suspend_voltage(struct regulator_dev *rdev, int uV)
+{
+	struct pf8x00_regulator_data *regl = rdev_get_drvdata(rdev);
+	int ret;
+
+	if (regl->suspend_voltage_cache == uV)
+		return 0;
+
+	ret = regulator_map_voltage_iterate(rdev, uV, uV);
+	if (ret < 0) {
+		dev_err(rdev_get_dev(rdev), "failed to map %i uV\n", uV);
+		return ret;
 	}
 
-	phase = val / 45;
-	if ((phase * 45) != val) {
-		dev_warn(config->dev,
-			 "invalid phase_shift %d for BUCK%d, use 0 degrees\n",
-			 (phase * 45), desc->id - PF8X00_LDO4);
-		phase = PF8X00_SWXPHASE_SHIFT;
+	dev_dbg(rdev_get_dev(rdev), "uV: %i, reg: 0x%x, msk: 0x%x, val: 0x%x\n",
+		uV, regl->suspend_voltage_reg, regl->desc.vsel_mask, ret);
+	ret = regmap_update_bits(rdev->regmap, regl->suspend_voltage_reg,
+				 regl->desc.vsel_mask, ret);
+	if (ret < 0) {
+		dev_err(rdev_get_dev(rdev), "failed to set %i uV\n", uV);
+		return ret;
 	}
 
-	data->phase_shift = (phase >= 1) ? phase - 1 : PF8X00_SWXPHASE_SHIFT;
+	regl->suspend_voltage_cache = uV;
 
 	return 0;
 }
@@ -270,15 +334,37 @@ static const struct regulator_ops pf8x00_ldo_ops = {
 	.list_voltage = regulator_list_voltage_table,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_suspend_enable = pf8x00_suspend_enable,
+	.set_suspend_disable = pf8x00_suspend_disable,
+	.set_suspend_voltage = pf8x00_set_suspend_voltage,
 };
 
-static const struct regulator_ops pf8x00_buck_ops = {
+
+static const struct regulator_ops pf8x00_buck1_6_ops = {
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.list_voltage = regulator_list_voltage_linear_range,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.get_current_limit = regulator_get_current_limit_regmap,
+	.set_current_limit = regulator_set_current_limit_regmap,
+	.set_suspend_enable = pf8x00_suspend_enable,
+	.set_suspend_disable = pf8x00_suspend_disable,
+	.set_suspend_voltage = pf8x00_set_suspend_voltage,
+};
+
+static const struct regulator_ops pf8x00_buck7_ops = {
 	.enable = regulator_enable_regmap,
 	.disable = regulator_disable_regmap,
 	.is_enabled = regulator_is_enabled_regmap,
 	.list_voltage = regulator_list_voltage_table,
 	.set_voltage_sel = regulator_set_voltage_sel_regmap,
 	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.get_current_limit = regulator_get_current_limit_regmap,
+	.set_current_limit = regulator_set_current_limit_regmap,
+	.set_suspend_enable = pf8x00_suspend_enable,
+	.set_suspend_disable = pf8x00_suspend_disable,
 };
 
 static const struct regulator_ops pf8x00_vsnvs_ops = {
@@ -310,6 +396,9 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
 			.disable_val = 0x0,			\
 			.enable_mask = 2,			\
 		},						\
+		.suspend_enable_reg = (base) + LDO_CONFIG2,	\
+		.suspend_enable_mask = 1,			\
+		.suspend_voltage_reg = (base) + LDO_STBY_VOLT,	\
 	}
 
 #define PF8X00BUCK(_id, _name, base, voltages)			\
@@ -319,14 +408,54 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
 			.of_match = _name,			\
 			.regulators_node = "regulators",	\
 			.of_parse_cb = pf8x00_of_parse_cb,	\
-			.n_voltages = ARRAY_SIZE(voltages),	\
-			.ops = &pf8x00_buck_ops,		\
+			.n_voltages = PF8XOO_SW1_6_VOLTAGE_NUM,	\
+			.ops = &pf8x00_buck1_6_ops,		\
 			.type = REGULATOR_VOLTAGE,		\
 			.id = PF8X00_BUCK ## _id,		\
 			.owner = THIS_MODULE,			\
+			.ramp_delay = 19000,			\
+			.linear_ranges = pf8x00_sw1_to_6_voltages, \
+			.n_linear_ranges = \
+				ARRAY_SIZE(pf8x00_sw1_to_6_voltages), \
+			.vsel_reg = (base) + SW_RUN_VOLT,	\
+			.vsel_mask = 0xff,			\
+			.curr_table = pf8x00_sw_current_table, \
+			.n_current_limits = \
+				ARRAY_SIZE(pf8x00_sw_current_table), \
+			.csel_reg = (base) + SW_CONFIG2,	\
+			.csel_mask = PF8X00_SWXILIM_MASK,	\
+			.enable_reg = (base) + SW_MODE1,	\
+			.enable_val = 0x3,			\
+			.disable_val = 0x0,			\
+			.enable_mask = 0x3,			\
+			.enable_time = 500,			\
+		},						\
+		.suspend_enable_reg = (base) + SW_MODE1,	\
+		.suspend_enable_mask = 0xc,			\
+		.suspend_voltage_reg = (base) + SW_STBY_VOLT,	\
+	}
+
+#define PF8X00BUCK7(_name, base, voltages)			\
+	[PF8X00_BUCK7] = {				\
+		.desc = {					\
+			.name = _name,				\
+			.of_match = _name,			\
+			.regulators_node = "regulators",	\
+			.of_parse_cb = pf8x00_of_parse_cb,	\
+			.n_voltages = ARRAY_SIZE(voltages),	\
+			.ops = &pf8x00_buck7_ops,		\
+			.type = REGULATOR_VOLTAGE,		\
+			.id = PF8X00_BUCK7,		\
+			.owner = THIS_MODULE,			\
+			.ramp_delay = 19000,			\
 			.volt_table = voltages,			\
 			.vsel_reg = (base) + SW_RUN_VOLT,	\
 			.vsel_mask = 0xff,			\
+			.curr_table = pf8x00_sw_current_table, \
+			.n_current_limits = \
+				ARRAY_SIZE(pf8x00_sw_current_table), \
+			.csel_reg = (base) + SW_CONFIG2,	\
+			.csel_mask = PF8X00_SWXILIM_MASK,	\
 			.enable_reg = (base) + SW_MODE1,	\
 			.enable_val = 0x3,			\
 			.disable_val = 0x0,			\
@@ -335,6 +464,7 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
 		},						\
 	}
 
+
 #define PF8X00VSNVS(_name, base, voltages)			\
 	[PF8X00_VSNVS] = {					\
 		.desc = {					\
@@ -352,7 +482,7 @@ static const struct regulator_ops pf8x00_vsnvs_ops = {
 		},						\
 	}
 
-static struct pf8x00_regulator pf8x00_regulators_data[PF8X00_MAX_REGULATORS] = {
+static struct pf8x00_regulator_data pf8x00_regs_data[PF8X00_MAX_REGULATORS] = {
 	PF8X00LDO(1, "ldo1", PF8X00_LDO_BASE(PF8X00_LDO1), pf8x00_ldo_voltages),
 	PF8X00LDO(2, "ldo2", PF8X00_LDO_BASE(PF8X00_LDO2), pf8x00_ldo_voltages),
 	PF8X00LDO(3, "ldo3", PF8X00_LDO_BASE(PF8X00_LDO3), pf8x00_ldo_voltages),
@@ -363,7 +493,7 @@ static struct pf8x00_regulator pf8x00_regulators_data[PF8X00_MAX_REGULATORS] = {
 	PF8X00BUCK(4, "buck4", PF8X00_SW_BASE(PF8X00_BUCK4), pf8x00_sw1_to_6_voltages),
 	PF8X00BUCK(5, "buck5", PF8X00_SW_BASE(PF8X00_BUCK5), pf8x00_sw1_to_6_voltages),
 	PF8X00BUCK(6, "buck6", PF8X00_SW_BASE(PF8X00_BUCK6), pf8x00_sw1_to_6_voltages),
-	PF8X00BUCK(7, "buck7", PF8X00_SW_BASE(PF8X00_BUCK7), pf8x00_sw7_voltages),
+	PF8X00BUCK7("buck7", PF8X00_SW_BASE(PF8X00_BUCK7), pf8x00_sw7_voltages),
 	PF8X00VSNVS("vsnvs", PF8X00_VSNVS_CONFIG1, pf8x00_vsnvs_voltages),
 };
 
@@ -399,7 +529,7 @@ static int pf8x00_identify(struct pf8x00_chip *chip)
 		name = "PF8121A";
 		break;
 	case PF8200:
-		name = "PF8100";
+		name = "PF8200";
 		break;
 	default:
 		dev_err(chip->dev, "Unknown pf8x00 device id 0x%x\n", dev_id);
@@ -437,12 +567,12 @@ static int pf8x00_i2c_probe(struct i2c_client *client)
 	if (ret)
 		return ret;
 
-	for (id = 0; id < ARRAY_SIZE(pf8x00_regulators_data); id++) {
-		struct pf8x00_regulator *data = &pf8x00_regulators_data[id];
+	for (id = 0; id < ARRAY_SIZE(pf8x00_regs_data); id++) {
+		struct pf8x00_regulator_data *data = &pf8x00_regs_data[id];
 		struct regulator_dev *rdev;
 
 		config.dev = chip->dev;
-		config.driver_data = chip;
+		config.driver_data = data;
 		config.regmap = chip->regmap;
 
 		rdev = devm_regulator_register(&client->dev, &data->desc, &config);
@@ -451,18 +581,6 @@ static int pf8x00_i2c_probe(struct i2c_client *client)
 				"failed to register %s regulator\n", data->desc.name);
 			return PTR_ERR(rdev);
 		}
-
-		if ((id >= PF8X00_BUCK1) && (id <= PF8X00_BUCK7)) {
-			u8 reg = PF8X00_SW_BASE(id) + SW_CONFIG2;
-
-			regmap_update_bits(chip->regmap, reg,
-					   PF8X00_SWXPHASE_MASK,
-					   data->phase_shift);
-
-			regmap_update_bits(chip->regmap, reg,
-					   PF8X00_SWXILIM_MASK,
-					   data->ilim << PF8X00_SWXILIM_SHIFT);
-		}
 	}
 
 	return 0;
diff --git a/drivers/regulator/qcom-labibb-regulator.c b/drivers/regulator/qcom-labibb-regulator.c
index 8ccf572394a2..de25e3279b4b 100644
--- a/drivers/regulator/qcom-labibb-regulator.c
+++ b/drivers/regulator/qcom-labibb-regulator.c
@@ -17,11 +17,48 @@
 
 #define PMI8998_LAB_REG_BASE		0xde00
 #define PMI8998_IBB_REG_BASE		0xdc00
+#define PMI8998_IBB_LAB_REG_OFFSET	0x200
 
 #define REG_LABIBB_STATUS1		0x08
+ #define LABIBB_STATUS1_SC_BIT		BIT(6)
+ #define LABIBB_STATUS1_VREG_OK_BIT	BIT(7)
+
+#define REG_LABIBB_INT_SET_TYPE		0x11
+#define REG_LABIBB_INT_POLARITY_HIGH	0x12
+#define REG_LABIBB_INT_POLARITY_LOW	0x13
+#define REG_LABIBB_INT_LATCHED_CLR	0x14
+#define REG_LABIBB_INT_EN_SET		0x15
+#define REG_LABIBB_INT_EN_CLR		0x16
+ #define LABIBB_INT_VREG_OK		BIT(0)
+ #define LABIBB_INT_VREG_TYPE_LEVEL	0
+
+#define REG_LABIBB_VOLTAGE		0x41
+ #define LABIBB_VOLTAGE_OVERRIDE_EN	BIT(7)
+ #define LAB_VOLTAGE_SET_MASK		GENMASK(3, 0)
+ #define IBB_VOLTAGE_SET_MASK		GENMASK(5, 0)
+
 #define REG_LABIBB_ENABLE_CTL		0x46
-#define LABIBB_STATUS1_VREG_OK_BIT	BIT(7)
-#define LABIBB_CONTROL_ENABLE		BIT(7)
+ #define LABIBB_CONTROL_ENABLE		BIT(7)
+
+#define REG_LABIBB_PD_CTL		0x47
+ #define LAB_PD_CTL_MASK		GENMASK(1, 0)
+ #define IBB_PD_CTL_MASK		(BIT(0) | BIT(7))
+ #define LAB_PD_CTL_STRONG_PULL		BIT(0)
+ #define IBB_PD_CTL_HALF_STRENGTH	BIT(0)
+ #define IBB_PD_CTL_EN			BIT(7)
+
+#define REG_LABIBB_CURRENT_LIMIT	0x4b
+ #define LAB_CURRENT_LIMIT_MASK		GENMASK(2, 0)
+ #define IBB_CURRENT_LIMIT_MASK		GENMASK(4, 0)
+ #define LAB_CURRENT_LIMIT_OVERRIDE_EN	BIT(3)
+ #define LABIBB_CURRENT_LIMIT_EN	BIT(7)
+
+#define REG_IBB_PWRUP_PWRDN_CTL_1	0x58
+ #define IBB_CTL_1_DISCHARGE_EN		BIT(2)
+
+#define REG_LABIBB_SOFT_START_CTL	0x5f
+#define REG_LABIBB_SEC_ACCESS		0xd0
+ #define LABIBB_SEC_UNLOCK_CODE		0xa5
 
 #define LAB_ENABLE_CTL_MASK		BIT(7)
 #define IBB_ENABLE_CTL_MASK		(BIT(7) | BIT(6))
@@ -30,14 +67,35 @@
 #define LAB_ENABLE_TIME			(LABIBB_OFF_ON_DELAY * 2)
 #define IBB_ENABLE_TIME			(LABIBB_OFF_ON_DELAY * 10)
 #define LABIBB_POLL_ENABLED_TIME	1000
+#define OCP_RECOVERY_INTERVAL_MS	500
+#define SC_RECOVERY_INTERVAL_MS		250
+#define LABIBB_MAX_OCP_COUNT		4
+#define LABIBB_MAX_SC_COUNT		3
+#define LABIBB_MAX_FATAL_COUNT		2
+
+struct labibb_current_limits {
+	u32				uA_min;
+	u32				uA_step;
+	u8				ovr_val;
+};
 
 struct labibb_regulator {
 	struct regulator_desc		desc;
 	struct device			*dev;
 	struct regmap			*regmap;
 	struct regulator_dev		*rdev;
+	struct labibb_current_limits	uA_limits;
+	struct delayed_work		ocp_recovery_work;
+	struct delayed_work		sc_recovery_work;
 	u16				base;
 	u8				type;
+	u8				dischg_sel;
+	u8				soft_start_sel;
+	int				sc_irq;
+	int				sc_count;
+	int				ocp_irq;
+	int				ocp_irq_count;
+	int				fatal_count;
 };
 
 struct labibb_regulator_data {
@@ -47,10 +105,579 @@ struct labibb_regulator_data {
 	const struct regulator_desc	*desc;
 };
 
+static int qcom_labibb_ocp_hw_enable(struct regulator_dev *rdev)
+{
+	struct labibb_regulator *vreg = rdev_get_drvdata(rdev);
+	int ret;
+
+	/* Clear irq latch status to avoid spurious event */
+	ret = regmap_update_bits(rdev->regmap,
+				 vreg->base + REG_LABIBB_INT_LATCHED_CLR,
+				 LABIBB_INT_VREG_OK, 1);
+	if (ret)
+		return ret;
+
+	/* Enable OCP HW interrupt */
+	return regmap_update_bits(rdev->regmap,
+				  vreg->base + REG_LABIBB_INT_EN_SET,
+				  LABIBB_INT_VREG_OK, 1);
+}
+
+static int qcom_labibb_ocp_hw_disable(struct regulator_dev *rdev)
+{
+	struct labibb_regulator *vreg = rdev_get_drvdata(rdev);
+
+	return regmap_update_bits(rdev->regmap,
+				  vreg->base + REG_LABIBB_INT_EN_CLR,
+				  LABIBB_INT_VREG_OK, 1);
+}
+
+/**
+ * qcom_labibb_check_ocp_status - Check the Over-Current Protection status
+ * @vreg: Main driver structure
+ *
+ * This function checks the STATUS1 register for the VREG_OK bit: if it is
+ * set, then there is no Over-Current event.
+ *
+ * Returns: Zero if there is no over-current, 1 if in over-current or
+ *          negative number for error
+ */
+static int qcom_labibb_check_ocp_status(struct labibb_regulator *vreg)
+{
+	u32 cur_status;
+	int ret;
+
+	ret = regmap_read(vreg->rdev->regmap, vreg->base + REG_LABIBB_STATUS1,
+			  &cur_status);
+	if (ret)
+		return ret;
+
+	return !(cur_status & LABIBB_STATUS1_VREG_OK_BIT);
+}
+
+/**
+ * qcom_labibb_ocp_recovery_worker - Handle OCP event
+ * @work: OCP work structure
+ *
+ * This is the worker function to handle the Over Current Protection
+ * hardware event; This will check if the hardware is still
+ * signaling an over-current condition and will eventually stop
+ * the regulator if such condition is still signaled after
+ * LABIBB_MAX_OCP_COUNT times.
+ *
+ * If the driver that is consuming the regulator did not take action
+ * for the OCP condition, or the hardware did not stabilize, a cut
+ * of the LAB and IBB regulators will be forced (regulators will be
+ * disabled).
+ *
+ * As last, if the writes to shut down the LAB/IBB regulators fail
+ * for more than LABIBB_MAX_FATAL_COUNT, then a kernel panic will be
+ * triggered, as a last resort to protect the hardware from burning;
+ * this, however, is expected to never happen, but this is kept to
+ * try to further ensure that we protect the hardware at all costs.
+ */
+static void qcom_labibb_ocp_recovery_worker(struct work_struct *work)
+{
+	struct labibb_regulator *vreg;
+	const struct regulator_ops *ops;
+	int ret;
+
+	vreg = container_of(work, struct labibb_regulator,
+			    ocp_recovery_work.work);
+	ops = vreg->rdev->desc->ops;
+
+	if (vreg->ocp_irq_count >= LABIBB_MAX_OCP_COUNT) {
+		/*
+		 * If we tried to disable the regulator multiple times but
+		 * we kept failing, there's only one last hope to save our
+		 * hardware from the death: raise a kernel bug, reboot and
+		 * hope that the bootloader kindly saves us. This, though
+		 * is done only as paranoid checking, because failing the
+		 * regmap write to disable the vreg is almost impossible,
+		 * since we got here after multiple regmap R/W.
+		 */
+		BUG_ON(vreg->fatal_count > LABIBB_MAX_FATAL_COUNT);
+		dev_err(&vreg->rdev->dev, "LABIBB: CRITICAL: Disabling regulator\n");
+
+		/* Disable the regulator immediately to avoid damage */
+		ret = ops->disable(vreg->rdev);
+		if (ret) {
+			vreg->fatal_count++;
+			goto reschedule;
+		}
+		enable_irq(vreg->ocp_irq);
+		vreg->fatal_count = 0;
+		return;
+	}
+
+	ret = qcom_labibb_check_ocp_status(vreg);
+	if (ret != 0) {
+		vreg->ocp_irq_count++;
+		goto reschedule;
+	}
+
+	ret = qcom_labibb_ocp_hw_enable(vreg->rdev);
+	if (ret) {
+		/* We cannot trust it without OCP enabled. */
+		dev_err(vreg->dev, "Cannot enable OCP IRQ\n");
+		vreg->ocp_irq_count++;
+		goto reschedule;
+	}
+
+	enable_irq(vreg->ocp_irq);
+	/* Everything went fine: reset the OCP count! */
+	vreg->ocp_irq_count = 0;
+	return;
+
+reschedule:
+	mod_delayed_work(system_wq, &vreg->ocp_recovery_work,
+			 msecs_to_jiffies(OCP_RECOVERY_INTERVAL_MS));
+}
+
+/**
+ * qcom_labibb_ocp_isr - Interrupt routine for OverCurrent Protection
+ * @irq:  Interrupt number
+ * @chip: Main driver structure
+ *
+ * Over Current Protection (OCP) will signal to the client driver
+ * that an over-current event has happened and then will schedule
+ * a recovery worker.
+ *
+ * Disabling and eventually re-enabling the regulator is expected
+ * to be done by the driver, as some hardware may be triggering an
+ * over-current condition only at first initialization or it may
+ * be expected only for a very brief amount of time, after which
+ * the attached hardware may be expected to stabilize its current
+ * draw.
+ *
+ * Returns: IRQ_HANDLED for success or IRQ_NONE for failure.
+ */
+static irqreturn_t qcom_labibb_ocp_isr(int irq, void *chip)
+{
+	struct labibb_regulator *vreg = chip;
+	const struct regulator_ops *ops = vreg->rdev->desc->ops;
+	int ret;
+
+	/* If the regulator is not enabled, this is a fake event */
+	if (!ops->is_enabled(vreg->rdev))
+		return 0;
+
+	/* If we tried to recover for too many times it's not getting better */
+	if (vreg->ocp_irq_count > LABIBB_MAX_OCP_COUNT)
+		return IRQ_NONE;
+
+	/*
+	 * If we (unlikely) can't read this register, to prevent hardware
+	 * damage at all costs, we assume that the overcurrent event was
+	 * real; Moreover, if the status register is not signaling OCP,
+	 * it was a spurious event, so it's all ok.
+	 */
+	ret = qcom_labibb_check_ocp_status(vreg);
+	if (ret == 0) {
+		vreg->ocp_irq_count = 0;
+		goto end;
+	}
+	vreg->ocp_irq_count++;
+
+	/*
+	 * Disable the interrupt temporarily, or it will fire continuously;
+	 * we will re-enable it in the recovery worker function.
+	 */
+	disable_irq_nosync(irq);
+
+	/* Warn the user for overcurrent */
+	dev_warn(vreg->dev, "Over-Current interrupt fired!\n");
+
+	/* Disable the interrupt to avoid hogging */
+	ret = qcom_labibb_ocp_hw_disable(vreg->rdev);
+	if (ret)
+		goto end;
+
+	/* Signal overcurrent event to drivers */
+	regulator_notifier_call_chain(vreg->rdev,
+				      REGULATOR_EVENT_OVER_CURRENT, NULL);
+
+end:
+	/* Schedule the recovery work */
+	schedule_delayed_work(&vreg->ocp_recovery_work,
+			      msecs_to_jiffies(OCP_RECOVERY_INTERVAL_MS));
+	if (ret)
+		return IRQ_NONE;
+
+	return IRQ_HANDLED;
+}
+
+static int qcom_labibb_set_ocp(struct regulator_dev *rdev)
+{
+	struct labibb_regulator *vreg = rdev_get_drvdata(rdev);
+	char *ocp_irq_name;
+	u32 irq_flags = IRQF_ONESHOT;
+	int irq_trig_low, ret;
+
+	/* If there is no OCP interrupt, there's nothing to set */
+	if (vreg->ocp_irq <= 0)
+		return -EINVAL;
+
+	ocp_irq_name = devm_kasprintf(vreg->dev, GFP_KERNEL, "%s-over-current",
+				      vreg->desc.name);
+	if (!ocp_irq_name)
+		return -ENOMEM;
+
+	/* IRQ polarities - LAB: trigger-low, IBB: trigger-high */
+	switch (vreg->type) {
+	case QCOM_LAB_TYPE:
+		irq_flags |= IRQF_TRIGGER_LOW;
+		irq_trig_low = 1;
+		break;
+	case QCOM_IBB_TYPE:
+		irq_flags |= IRQF_TRIGGER_HIGH;
+		irq_trig_low = 0;
+		break;
+	default:
+		return -EINVAL;
+	}
+
+	/* Activate OCP HW level interrupt */
+	ret = regmap_update_bits(rdev->regmap,
+				 vreg->base + REG_LABIBB_INT_SET_TYPE,
+				 LABIBB_INT_VREG_OK,
+				 LABIBB_INT_VREG_TYPE_LEVEL);
+	if (ret)
+		return ret;
+
+	/* Set OCP interrupt polarity */
+	ret = regmap_update_bits(rdev->regmap,
+				 vreg->base + REG_LABIBB_INT_POLARITY_HIGH,
+				 LABIBB_INT_VREG_OK, !irq_trig_low);
+	if (ret)
+		return ret;
+	ret = regmap_update_bits(rdev->regmap,
+				 vreg->base + REG_LABIBB_INT_POLARITY_LOW,
+				 LABIBB_INT_VREG_OK, irq_trig_low);
+	if (ret)
+		return ret;
+
+	ret = qcom_labibb_ocp_hw_enable(rdev);
+	if (ret)
+		return ret;
+
+	return devm_request_threaded_irq(vreg->dev, vreg->ocp_irq, NULL,
+					 qcom_labibb_ocp_isr, irq_flags,
+					 ocp_irq_name, vreg);
+}
+
+/**
+ * qcom_labibb_check_sc_status - Check the Short Circuit Protection status
+ * @vreg: Main driver structure
+ *
+ * This function checks the STATUS1 register on both LAB and IBB regulators
+ * for the ShortCircuit bit: if it is set on *any* of them, then we have
+ * experienced a short-circuit event.
+ *
+ * Returns: Zero if there is no short-circuit, 1 if in short-circuit or
+ *          negative number for error
+ */
+static int qcom_labibb_check_sc_status(struct labibb_regulator *vreg)
+{
+	u32 ibb_status, ibb_reg, lab_status, lab_reg;
+	int ret;
+
+	/* We have to work on both regulators due to PBS... */
+	lab_reg = ibb_reg = vreg->base + REG_LABIBB_STATUS1;
+	if (vreg->type == QCOM_LAB_TYPE)
+		ibb_reg -= PMI8998_IBB_LAB_REG_OFFSET;
+	else
+		lab_reg += PMI8998_IBB_LAB_REG_OFFSET;
+
+	ret = regmap_read(vreg->rdev->regmap, lab_reg, &lab_status);
+	if (ret)
+		return ret;
+	ret = regmap_read(vreg->rdev->regmap, ibb_reg, &ibb_status);
+	if (ret)
+		return ret;
+
+	return !!(lab_status & LABIBB_STATUS1_SC_BIT) ||
+	       !!(ibb_status & LABIBB_STATUS1_SC_BIT);
+}
+
+/**
+ * qcom_labibb_sc_recovery_worker - Handle Short Circuit event
+ * @work: SC work structure
+ *
+ * This is the worker function to handle the Short Circuit Protection
+ * hardware event; This will check if the hardware is still
+ * signaling a short-circuit condition and will eventually never
+ * re-enable the regulator if such condition is still signaled after
+ * LABIBB_MAX_SC_COUNT times.
+ *
+ * If the driver that is consuming the regulator did not take action
+ * for the SC condition, or the hardware did not stabilize, this
+ * worker will stop rescheduling, leaving the regulators disabled
+ * as already done by the Portable Batch System (PBS).
+ *
+ * Returns: IRQ_HANDLED for success or IRQ_NONE for failure.
+ */
+static void qcom_labibb_sc_recovery_worker(struct work_struct *work)
+{
+	struct labibb_regulator *vreg;
+	const struct regulator_ops *ops;
+	u32 lab_reg, ibb_reg, lab_val, ibb_val, val;
+	bool pbs_cut = false;
+	int i, sc, ret;
+
+	vreg = container_of(work, struct labibb_regulator,
+			    sc_recovery_work.work);
+	ops = vreg->rdev->desc->ops;
+
+	/*
+	 * If we tried to check the regulator status multiple times but we
+	 * kept failing, then just bail out, as the Portable Batch System
+	 * (PBS) will disable the vregs for us, preventing hardware damage.
+	 */
+	if (vreg->fatal_count > LABIBB_MAX_FATAL_COUNT)
+		return;
+
+	/* Too many short-circuit events. Throw in the towel. */
+	if (vreg->sc_count > LABIBB_MAX_SC_COUNT)
+		return;
+
+	/*
+	 * The Portable Batch System (PBS) automatically disables LAB
+	 * and IBB when a short-circuit event is detected, so we have to
+	 * check and work on both of them at the same time.
+	 */
+	lab_reg = ibb_reg = vreg->base + REG_LABIBB_ENABLE_CTL;
+	if (vreg->type == QCOM_LAB_TYPE)
+		ibb_reg -= PMI8998_IBB_LAB_REG_OFFSET;
+	else
+		lab_reg += PMI8998_IBB_LAB_REG_OFFSET;
+
+	sc = qcom_labibb_check_sc_status(vreg);
+	if (sc)
+		goto reschedule;
+
+	for (i = 0; i < LABIBB_MAX_SC_COUNT; i++) {
+		ret = regmap_read(vreg->regmap, lab_reg, &lab_val);
+		if (ret) {
+			vreg->fatal_count++;
+			goto reschedule;
+		}
+
+		ret = regmap_read(vreg->regmap, ibb_reg, &ibb_val);
+		if (ret) {
+			vreg->fatal_count++;
+			goto reschedule;
+		}
+		val = lab_val & ibb_val;
+
+		if (!(val & LABIBB_CONTROL_ENABLE)) {
+			pbs_cut = true;
+			break;
+		}
+		usleep_range(5000, 6000);
+	}
+	if (pbs_cut)
+		goto reschedule;
+
+
+	/*
+	 * If we have reached this point, we either have successfully
+	 * recovered from the SC condition or we had a spurious SC IRQ,
+	 * which means that we can re-enable the regulators, if they
+	 * have ever been disabled by the PBS.
+	 */
+	ret = ops->enable(vreg->rdev);
+	if (ret)
+		goto reschedule;
+
+	/* Everything went fine: reset the OCP count! */
+	vreg->sc_count = 0;
+	enable_irq(vreg->sc_irq);
+	return;
+
+reschedule:
+	/*
+	 * Now that we have done basic handling of the short-circuit,
+	 * reschedule this worker in the regular system workqueue, as
+	 * taking action is not truly urgent anymore.
+	 */
+	vreg->sc_count++;
+	mod_delayed_work(system_wq, &vreg->sc_recovery_work,
+			 msecs_to_jiffies(SC_RECOVERY_INTERVAL_MS));
+}
+
+/**
+ * qcom_labibb_sc_isr - Interrupt routine for Short Circuit Protection
+ * @irq:  Interrupt number
+ * @chip: Main driver structure
+ *
+ * Short Circuit Protection (SCP) will signal to the client driver
+ * that a regulation-out event has happened and then will schedule
+ * a recovery worker.
+ *
+ * The LAB and IBB regulators will be automatically disabled by the
+ * Portable Batch System (PBS) and they will be enabled again by
+ * the worker function if the hardware stops signaling the short
+ * circuit event.
+ *
+ * Returns: IRQ_HANDLED for success or IRQ_NONE for failure.
+ */
+static irqreturn_t qcom_labibb_sc_isr(int irq, void *chip)
+{
+	struct labibb_regulator *vreg = chip;
+
+	if (vreg->sc_count > LABIBB_MAX_SC_COUNT)
+		return IRQ_NONE;
+
+	/* Warn the user for short circuit */
+	dev_warn(vreg->dev, "Short-Circuit interrupt fired!\n");
+
+	/*
+	 * Disable the interrupt temporarily, or it will fire continuously;
+	 * we will re-enable it in the recovery worker function.
+	 */
+	disable_irq_nosync(irq);
+
+	/* Signal out of regulation event to drivers */
+	regulator_notifier_call_chain(vreg->rdev,
+				      REGULATOR_EVENT_REGULATION_OUT, NULL);
+
+	/* Schedule the short-circuit handling as high-priority work */
+	mod_delayed_work(system_highpri_wq, &vreg->sc_recovery_work,
+			 msecs_to_jiffies(SC_RECOVERY_INTERVAL_MS));
+	return IRQ_HANDLED;
+}
+
+
+static int qcom_labibb_set_current_limit(struct regulator_dev *rdev,
+					 int min_uA, int max_uA)
+{
+	struct labibb_regulator *vreg = rdev_get_drvdata(rdev);
+	struct regulator_desc *desc = &vreg->desc;
+	struct labibb_current_limits *lim = &vreg->uA_limits;
+	u32 mask, val;
+	int i, ret, sel = -1;
+
+	if (min_uA < lim->uA_min || max_uA < lim->uA_min)
+		return -EINVAL;
+
+	for (i = 0; i < desc->n_current_limits; i++) {
+		int uA_limit = (lim->uA_step * i) + lim->uA_min;
+
+		if (max_uA >= uA_limit && min_uA <= uA_limit)
+			sel = i;
+	}
+	if (sel < 0)
+		return -EINVAL;
+
+	/* Current limit setting needs secure access */
+	ret = regmap_write(vreg->regmap, vreg->base + REG_LABIBB_SEC_ACCESS,
+			   LABIBB_SEC_UNLOCK_CODE);
+	if (ret)
+		return ret;
+
+	mask = desc->csel_mask | lim->ovr_val;
+	mask |= LABIBB_CURRENT_LIMIT_EN;
+	val = (u32)sel | lim->ovr_val;
+	val |= LABIBB_CURRENT_LIMIT_EN;
+
+	return regmap_update_bits(vreg->regmap, desc->csel_reg, mask, val);
+}
+
+static int qcom_labibb_get_current_limit(struct regulator_dev *rdev)
+{
+	struct labibb_regulator *vreg = rdev_get_drvdata(rdev);
+	struct regulator_desc *desc = &vreg->desc;
+	struct labibb_current_limits *lim = &vreg->uA_limits;
+	unsigned int cur_step;
+	int ret;
+
+	ret = regmap_read(vreg->regmap, desc->csel_reg, &cur_step);
+	if (ret)
+		return ret;
+	cur_step &= desc->csel_mask;
+
+	return (cur_step * lim->uA_step) + lim->uA_min;
+}
+
+static int qcom_labibb_set_soft_start(struct regulator_dev *rdev)
+{
+	struct labibb_regulator *vreg = rdev_get_drvdata(rdev);
+	u32 val = 0;
+
+	if (vreg->type == QCOM_IBB_TYPE)
+		val = vreg->dischg_sel;
+	else
+		val = vreg->soft_start_sel;
+
+	return regmap_write(rdev->regmap, rdev->desc->soft_start_reg, val);
+}
+
+static int qcom_labibb_get_table_sel(const int *table, int sz, u32 value)
+{
+	int i;
+
+	for (i = 0; i < sz; i++)
+		if (table[i] == value)
+			return i;
+	return -EINVAL;
+}
+
+/* IBB discharge resistor values in KOhms */
+static const int dischg_resistor_values[] = { 300, 64, 32, 16 };
+
+/* Soft start time in microseconds */
+static const int soft_start_values[] = { 200, 400, 600, 800 };
+
+static int qcom_labibb_of_parse_cb(struct device_node *np,
+				   const struct regulator_desc *desc,
+				   struct regulator_config *config)
+{
+	struct labibb_regulator *vreg = config->driver_data;
+	u32 dischg_kohms, soft_start_time;
+	int ret;
+
+	ret = of_property_read_u32(np, "qcom,discharge-resistor-kohms",
+				       &dischg_kohms);
+	if (ret)
+		dischg_kohms = 300;
+
+	ret = qcom_labibb_get_table_sel(dischg_resistor_values,
+					ARRAY_SIZE(dischg_resistor_values),
+					dischg_kohms);
+	if (ret < 0)
+		return ret;
+	vreg->dischg_sel = (u8)ret;
+
+	ret = of_property_read_u32(np, "qcom,soft-start-us",
+				   &soft_start_time);
+	if (ret)
+		soft_start_time = 200;
+
+	ret = qcom_labibb_get_table_sel(soft_start_values,
+					ARRAY_SIZE(soft_start_values),
+					soft_start_time);
+	if (ret < 0)
+		return ret;
+	vreg->soft_start_sel = (u8)ret;
+
+	return 0;
+}
+
 static const struct regulator_ops qcom_labibb_ops = {
 	.enable			= regulator_enable_regmap,
 	.disable		= regulator_disable_regmap,
 	.is_enabled		= regulator_is_enabled_regmap,
+	.set_voltage_sel	= regulator_set_voltage_sel_regmap,
+	.get_voltage_sel	= regulator_get_voltage_sel_regmap,
+	.list_voltage		= regulator_list_voltage_linear,
+	.map_voltage		= regulator_map_voltage_linear,
+	.set_active_discharge	= regulator_set_active_discharge_regmap,
+	.set_pull_down		= regulator_set_pull_down_regmap,
+	.set_current_limit	= qcom_labibb_set_current_limit,
+	.get_current_limit	= qcom_labibb_get_current_limit,
+	.set_soft_start		= qcom_labibb_set_soft_start,
+	.set_over_current_protection = qcom_labibb_set_ocp,
 };
 
 static const struct regulator_desc pmi8998_lab_desc = {
@@ -59,10 +686,25 @@ static const struct regulator_desc pmi8998_lab_desc = {
 	.enable_val		= LABIBB_CONTROL_ENABLE,
 	.enable_time		= LAB_ENABLE_TIME,
 	.poll_enabled_time	= LABIBB_POLL_ENABLED_TIME,
+	.soft_start_reg		= (PMI8998_LAB_REG_BASE + REG_LABIBB_SOFT_START_CTL),
+	.pull_down_reg		= (PMI8998_LAB_REG_BASE + REG_LABIBB_PD_CTL),
+	.pull_down_mask		= LAB_PD_CTL_MASK,
+	.pull_down_val_on	= LAB_PD_CTL_STRONG_PULL,
+	.vsel_reg		= (PMI8998_LAB_REG_BASE + REG_LABIBB_VOLTAGE),
+	.vsel_mask		= LAB_VOLTAGE_SET_MASK,
+	.apply_reg		= (PMI8998_LAB_REG_BASE + REG_LABIBB_VOLTAGE),
+	.apply_bit		= LABIBB_VOLTAGE_OVERRIDE_EN,
+	.csel_reg		= (PMI8998_LAB_REG_BASE + REG_LABIBB_CURRENT_LIMIT),
+	.csel_mask		= LAB_CURRENT_LIMIT_MASK,
+	.n_current_limits	= 8,
 	.off_on_delay		= LABIBB_OFF_ON_DELAY,
 	.owner			= THIS_MODULE,
 	.type			= REGULATOR_VOLTAGE,
+	.min_uV			= 4600000,
+	.uV_step		= 100000,
+	.n_voltages		= 16,
 	.ops			= &qcom_labibb_ops,
+	.of_parse_cb		= qcom_labibb_of_parse_cb,
 };
 
 static const struct regulator_desc pmi8998_ibb_desc = {
@@ -71,10 +713,29 @@ static const struct regulator_desc pmi8998_ibb_desc = {
 	.enable_val		= LABIBB_CONTROL_ENABLE,
 	.enable_time		= IBB_ENABLE_TIME,
 	.poll_enabled_time	= LABIBB_POLL_ENABLED_TIME,
+	.soft_start_reg		= (PMI8998_IBB_REG_BASE + REG_LABIBB_SOFT_START_CTL),
+	.active_discharge_off	= 0,
+	.active_discharge_on	= IBB_CTL_1_DISCHARGE_EN,
+	.active_discharge_mask	= IBB_CTL_1_DISCHARGE_EN,
+	.active_discharge_reg	= (PMI8998_IBB_REG_BASE + REG_IBB_PWRUP_PWRDN_CTL_1),
+	.pull_down_reg		= (PMI8998_IBB_REG_BASE + REG_LABIBB_PD_CTL),
+	.pull_down_mask		= IBB_PD_CTL_MASK,
+	.pull_down_val_on	= IBB_PD_CTL_HALF_STRENGTH | IBB_PD_CTL_EN,
+	.vsel_reg		= (PMI8998_IBB_REG_BASE + REG_LABIBB_VOLTAGE),
+	.vsel_mask		= IBB_VOLTAGE_SET_MASK,
+	.apply_reg		= (PMI8998_IBB_REG_BASE + REG_LABIBB_VOLTAGE),
+	.apply_bit		= LABIBB_VOLTAGE_OVERRIDE_EN,
+	.csel_reg		= (PMI8998_IBB_REG_BASE + REG_LABIBB_CURRENT_LIMIT),
+	.csel_mask		= IBB_CURRENT_LIMIT_MASK,
+	.n_current_limits	= 32,
 	.off_on_delay		= LABIBB_OFF_ON_DELAY,
 	.owner			= THIS_MODULE,
 	.type			= REGULATOR_VOLTAGE,
+	.min_uV			= 1400000,
+	.uV_step		= 100000,
+	.n_voltages		= 64,
 	.ops			= &qcom_labibb_ops,
+	.of_parse_cb		= qcom_labibb_of_parse_cb,
 };
 
 static const struct labibb_regulator_data pmi8998_labibb_data[] = {
@@ -94,7 +755,7 @@ static int qcom_labibb_regulator_probe(struct platform_device *pdev)
 	struct labibb_regulator *vreg;
 	struct device *dev = &pdev->dev;
 	struct regulator_config cfg = {};
-
+	struct device_node *reg_node;
 	const struct of_device_id *match;
 	const struct labibb_regulator_data *reg_data;
 	struct regmap *reg_regmap;
@@ -112,6 +773,8 @@ static int qcom_labibb_regulator_probe(struct platform_device *pdev)
 		return -ENODEV;
 
 	for (reg_data = match->data; reg_data->name; reg_data++) {
+		char *sc_irq_name;
+		int irq = 0;
 
 		/* Validate if the type of regulator is indeed
 		 * what's mentioned in DT.
@@ -134,10 +797,61 @@ static int qcom_labibb_regulator_probe(struct platform_device *pdev)
 		if (!vreg)
 			return -ENOMEM;
 
+		sc_irq_name = devm_kasprintf(dev, GFP_KERNEL,
+					     "%s-short-circuit",
+					     reg_data->name);
+		if (!sc_irq_name)
+			return -ENOMEM;
+
+		reg_node = of_get_child_by_name(pdev->dev.of_node,
+						reg_data->name);
+		if (!reg_node)
+			return -EINVAL;
+
+		/* The Short Circuit interrupt is critical */
+		irq = of_irq_get_byname(reg_node, "sc-err");
+		if (irq <= 0) {
+			if (irq == 0)
+				irq = -EINVAL;
+
+			return dev_err_probe(vreg->dev, irq,
+					     "Short-circuit irq not found.\n");
+		}
+		vreg->sc_irq = irq;
+
+		/* OverCurrent Protection IRQ is optional */
+		irq = of_irq_get_byname(reg_node, "ocp");
+		vreg->ocp_irq = irq;
+		vreg->ocp_irq_count = 0;
+		of_node_put(reg_node);
+
 		vreg->regmap = reg_regmap;
 		vreg->dev = dev;
 		vreg->base = reg_data->base;
 		vreg->type = reg_data->type;
+		INIT_DELAYED_WORK(&vreg->sc_recovery_work,
+				  qcom_labibb_sc_recovery_worker);
+
+		if (vreg->ocp_irq > 0)
+			INIT_DELAYED_WORK(&vreg->ocp_recovery_work,
+					  qcom_labibb_ocp_recovery_worker);
+
+		switch (vreg->type) {
+		case QCOM_LAB_TYPE:
+			/* LAB Limits: 200-1600mA */
+			vreg->uA_limits.uA_min  = 200000;
+			vreg->uA_limits.uA_step = 200000;
+			vreg->uA_limits.ovr_val = LAB_CURRENT_LIMIT_OVERRIDE_EN;
+			break;
+		case QCOM_IBB_TYPE:
+			/* IBB Limits: 0-1550mA */
+			vreg->uA_limits.uA_min  = 0;
+			vreg->uA_limits.uA_step = 50000;
+			vreg->uA_limits.ovr_val = 0; /* No override bit */
+			break;
+		default:
+			return -EINVAL;
+		}
 
 		memcpy(&vreg->desc, reg_data->desc, sizeof(vreg->desc));
 		vreg->desc.of_match = reg_data->name;
@@ -155,6 +869,14 @@ static int qcom_labibb_regulator_probe(struct platform_device *pdev)
 					reg_data->name, ret);
 			return PTR_ERR(vreg->rdev);
 		}
+
+		ret = devm_request_threaded_irq(vreg->dev, vreg->sc_irq, NULL,
+						qcom_labibb_sc_isr,
+						IRQF_ONESHOT |
+						IRQF_TRIGGER_RISING,
+						sc_irq_name, vreg);
+		if (ret)
+			return ret;
 	}
 
 	return 0;
diff --git a/drivers/regulator/qcom-rpmh-regulator.c b/drivers/regulator/qcom-rpmh-regulator.c
index c395a8dda6f7..79a554f1029d 100644
--- a/drivers/regulator/qcom-rpmh-regulator.c
+++ b/drivers/regulator/qcom-rpmh-regulator.c
@@ -732,6 +732,15 @@ static const struct rpmh_vreg_hw_data pmic5_hfsmps515 = {
 	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
 };
 
+static const struct rpmh_vreg_hw_data pmic5_hfsmps515_1 = {
+	.regulator_type = VRM,
+	.ops = &rpmh_regulator_vrm_ops,
+	.voltage_range = REGULATOR_LINEAR_RANGE(900000, 0, 4, 16000),
+	.n_voltages = 5,
+	.pmic_mode_map = pmic_mode_map_pmic5_smps,
+	.of_map_mode = rpmh_regulator_pmic4_smps_of_map_mode,
+};
+
 static const struct rpmh_vreg_hw_data pmic5_bob = {
 	.regulator_type = VRM,
 	.ops = &rpmh_regulator_vrm_bypass_ops,
@@ -928,6 +937,19 @@ static const struct rpmh_vreg_init_data pm8009_vreg_data[] = {
 	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo,      "vdd-l4"),
 	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l5-l6"),
 	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l5-l6"),
+	RPMH_VREG("ldo7",   "ldo%s7",  &pmic5_pldo_lv,   "vdd-l7"),
+	{},
+};
+
+static const struct rpmh_vreg_init_data pm8009_1_vreg_data[] = {
+	RPMH_VREG("smps1",  "smp%s1",  &pmic5_hfsmps510, "vdd-s1"),
+	RPMH_VREG("smps2",  "smp%s2",  &pmic5_hfsmps515_1, "vdd-s2"),
+	RPMH_VREG("ldo1",   "ldo%s1",  &pmic5_nldo,      "vdd-l1"),
+	RPMH_VREG("ldo2",   "ldo%s2",  &pmic5_nldo,      "vdd-l2"),
+	RPMH_VREG("ldo3",   "ldo%s3",  &pmic5_nldo,      "vdd-l3"),
+	RPMH_VREG("ldo4",   "ldo%s4",  &pmic5_nldo,      "vdd-l4"),
+	RPMH_VREG("ldo5",   "ldo%s5",  &pmic5_pldo,      "vdd-l5-l6"),
+	RPMH_VREG("ldo6",   "ldo%s6",  &pmic5_pldo,      "vdd-l5-l6"),
 	RPMH_VREG("ldo7",   "ldo%s6",  &pmic5_pldo_lv,   "vdd-l7"),
 	{},
 };
@@ -1058,6 +1080,10 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
 		.data = pm8009_vreg_data,
 	},
 	{
+		.compatible = "qcom,pm8009-1-rpmh-regulators",
+		.data = pm8009_1_vreg_data,
+	},
+	{
 		.compatible = "qcom,pm8150-rpmh-regulators",
 		.data = pm8150_vreg_data,
 	},
@@ -1090,6 +1116,14 @@ static const struct of_device_id __maybe_unused rpmh_regulator_match_table[] = {
 		.data = pm6150l_vreg_data,
 	},
 	{
+		.compatible = "qcom,pmc8180-rpmh-regulators",
+		.data = pm8150_vreg_data,
+	},
+	{
+		.compatible = "qcom,pmc8180c-rpmh-regulators",
+		.data = pm8150l_vreg_data,
+	},
+	{
 		.compatible = "qcom,pmx55-rpmh-regulators",
 		.data = pmx55_vreg_data,
 	},
diff --git a/drivers/regulator/rohm-regulator.c b/drivers/regulator/rohm-regulator.c
index 399002383b28..5c558b153d55 100644
--- a/drivers/regulator/rohm-regulator.c
+++ b/drivers/regulator/rohm-regulator.c
@@ -52,9 +52,12 @@ int rohm_regulator_set_dvs_levels(const struct rohm_dvs_config *dvs,
 	char *prop;
 	unsigned int reg, mask, omask, oreg = desc->enable_reg;
 
-	for (i = 0; i < ROHM_DVS_LEVEL_MAX && !ret; i++) {
-		if (dvs->level_map & (1 << i)) {
-			switch (i + 1) {
+	for (i = 0; i < ROHM_DVS_LEVEL_VALID_AMOUNT && !ret; i++) {
+		int bit;
+
+		bit = BIT(i);
+		if (dvs->level_map & bit) {
+			switch (bit) {
 			case ROHM_DVS_LEVEL_RUN:
 				prop = "rohm,dvs-run-voltage";
 				reg = dvs->run_reg;
diff --git a/drivers/regulator/rt4831-regulator.c b/drivers/regulator/rt4831-regulator.c
new file mode 100644
index 000000000000..3d4695ded629
--- /dev/null
+++ b/drivers/regulator/rt4831-regulator.c
@@ -0,0 +1,198 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+#include <linux/bitops.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/regulator/driver.h>
+
+enum {
+	DSV_OUT_VLCM = 0,
+	DSV_OUT_VPOS,
+	DSV_OUT_VNEG,
+	DSV_OUT_MAX
+};
+
+#define RT4831_REG_DSVEN	0x09
+#define RT4831_REG_VLCM		0x0c
+#define RT4831_REG_VPOS		0x0d
+#define RT4831_REG_VNEG		0x0e
+#define RT4831_REG_FLAGS	0x0f
+
+#define RT4831_VOLT_MASK	GENMASK(5, 0)
+#define RT4831_DSVMODE_SHIFT	5
+#define RT4831_DSVMODE_MASK	GENMASK(7, 5)
+#define RT4831_POSADEN_MASK	BIT(4)
+#define RT4831_NEGADEN_MASK	BIT(3)
+#define RT4831_POSEN_MASK	BIT(2)
+#define RT4831_NEGEN_MASK	BIT(1)
+
+#define RT4831_OTP_MASK		BIT(6)
+#define RT4831_LCMOVP_MASK	BIT(5)
+#define RT4831_VPOSSCP_MASK	BIT(3)
+#define RT4831_VNEGSCP_MASK	BIT(2)
+
+#define DSV_MODE_NORMAL		(0x4 << RT4831_DSVMODE_SHIFT)
+#define DSV_MODE_BYPASS		(0x6 << RT4831_DSVMODE_SHIFT)
+#define STEP_UV			50000
+#define VLCM_MIN_UV		4000000
+#define VLCM_MAX_UV		7150000
+#define VLCM_N_VOLTAGES		((VLCM_MAX_UV - VLCM_MIN_UV) / STEP_UV + 1)
+#define VPN_MIN_UV		4000000
+#define VPN_MAX_UV		6500000
+#define VPN_N_VOLTAGES		((VPN_MAX_UV - VPN_MIN_UV) / STEP_UV + 1)
+
+static int rt4831_get_error_flags(struct regulator_dev *rdev, unsigned int *flags)
+{
+	struct regmap *regmap = rdev_get_regmap(rdev);
+	int rid = rdev_get_id(rdev);
+	unsigned int val, events = 0;
+	int ret;
+
+	ret = regmap_read(regmap, RT4831_REG_FLAGS, &val);
+	if (ret)
+		return ret;
+
+	if (val & RT4831_OTP_MASK)
+		events |= REGULATOR_ERROR_OVER_TEMP;
+
+	if (rid == DSV_OUT_VLCM && (val & RT4831_LCMOVP_MASK))
+		events |= REGULATOR_ERROR_OVER_CURRENT;
+
+	if (rid == DSV_OUT_VPOS && (val & RT4831_VPOSSCP_MASK))
+		events |= REGULATOR_ERROR_OVER_CURRENT;
+
+	if (rid == DSV_OUT_VNEG && (val & RT4831_VNEGSCP_MASK))
+		events |= REGULATOR_ERROR_OVER_CURRENT;
+
+	*flags = events;
+	return 0;
+}
+
+static const struct regulator_ops rt4831_dsvlcm_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.set_bypass = regulator_set_bypass_regmap,
+	.get_bypass = regulator_get_bypass_regmap,
+	.get_error_flags = rt4831_get_error_flags,
+};
+
+static const struct regulator_ops rt4831_dsvpn_ops = {
+	.list_voltage = regulator_list_voltage_linear,
+	.set_voltage_sel = regulator_set_voltage_sel_regmap,
+	.get_voltage_sel = regulator_get_voltage_sel_regmap,
+	.enable = regulator_enable_regmap,
+	.disable = regulator_disable_regmap,
+	.is_enabled = regulator_is_enabled_regmap,
+	.set_active_discharge = regulator_set_active_discharge_regmap,
+	.get_error_flags = rt4831_get_error_flags,
+};
+
+static const struct regulator_desc rt4831_regulator_descs[] = {
+	{
+		.name = "DSVLCM",
+		.ops = &rt4831_dsvlcm_ops,
+		.of_match = of_match_ptr("DSVLCM"),
+		.regulators_node = of_match_ptr("regulators"),
+		.type = REGULATOR_VOLTAGE,
+		.id = DSV_OUT_VLCM,
+		.n_voltages = VLCM_N_VOLTAGES,
+		.min_uV = VLCM_MIN_UV,
+		.uV_step = STEP_UV,
+		.vsel_reg = RT4831_REG_VLCM,
+		.vsel_mask = RT4831_VOLT_MASK,
+		.bypass_reg = RT4831_REG_DSVEN,
+		.bypass_val_on = DSV_MODE_BYPASS,
+		.bypass_val_off = DSV_MODE_NORMAL,
+	},
+	{
+		.name = "DSVP",
+		.ops = &rt4831_dsvpn_ops,
+		.of_match = of_match_ptr("DSVP"),
+		.regulators_node = of_match_ptr("regulators"),
+		.type = REGULATOR_VOLTAGE,
+		.id = DSV_OUT_VPOS,
+		.n_voltages = VPN_N_VOLTAGES,
+		.min_uV = VPN_MIN_UV,
+		.uV_step = STEP_UV,
+		.vsel_reg = RT4831_REG_VPOS,
+		.vsel_mask = RT4831_VOLT_MASK,
+		.enable_reg = RT4831_REG_DSVEN,
+		.enable_mask = RT4831_POSEN_MASK,
+		.active_discharge_reg = RT4831_REG_DSVEN,
+		.active_discharge_mask = RT4831_POSADEN_MASK,
+	},
+	{
+		.name = "DSVN",
+		.ops = &rt4831_dsvpn_ops,
+		.of_match = of_match_ptr("DSVN"),
+		.regulators_node = of_match_ptr("regulators"),
+		.type = REGULATOR_VOLTAGE,
+		.id = DSV_OUT_VNEG,
+		.n_voltages = VPN_N_VOLTAGES,
+		.min_uV = VPN_MIN_UV,
+		.uV_step = STEP_UV,
+		.vsel_reg = RT4831_REG_VNEG,
+		.vsel_mask = RT4831_VOLT_MASK,
+		.enable_reg = RT4831_REG_DSVEN,
+		.enable_mask = RT4831_NEGEN_MASK,
+		.active_discharge_reg = RT4831_REG_DSVEN,
+		.active_discharge_mask = RT4831_NEGADEN_MASK,
+	}
+};
+
+static int rt4831_regulator_probe(struct platform_device *pdev)
+{
+	struct regmap *regmap;
+	struct regulator_dev *rdev;
+	struct regulator_config config = {};
+	int i, ret;
+
+	regmap = dev_get_regmap(pdev->dev.parent, NULL);
+	if (IS_ERR(regmap)) {
+		dev_err(&pdev->dev, "Failed to init regmap\n");
+		return PTR_ERR(regmap);
+	}
+
+	/* Configure DSV mode to normal by default */
+	ret = regmap_update_bits(regmap, RT4831_REG_DSVEN, RT4831_DSVMODE_MASK, DSV_MODE_NORMAL);
+	if (ret) {
+		dev_err(&pdev->dev, "Failed to configure dsv mode to normal\n");
+		return ret;
+	}
+
+	config.dev = pdev->dev.parent;
+	config.regmap = regmap;
+
+	for (i = 0; i < DSV_OUT_MAX; i++) {
+		rdev = devm_regulator_register(&pdev->dev, rt4831_regulator_descs + i, &config);
+		if (IS_ERR(rdev)) {
+			dev_err(&pdev->dev, "Failed to register %d regulator\n", i);
+			return PTR_ERR(rdev);
+		}
+	}
+
+	return 0;
+}
+
+static const struct platform_device_id rt4831_regulator_match[] = {
+	{ "rt4831-regulator", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(platform, rt4831_regulator_match);
+
+static struct platform_driver rt4831_regulator_driver = {
+	.driver = {
+		.name = "rt4831-regulator",
+	},
+	.id_table = rt4831_regulator_match,
+	.probe = rt4831_regulator_probe,
+};
+module_platform_driver(rt4831_regulator_driver);
+
+MODULE_AUTHOR("ChiYuan Huang <cy_huang@richtek.com>");
+MODULE_LICENSE("GPL v2");
diff --git a/drivers/regulator/s5m8767.c b/drivers/regulator/s5m8767.c
index 3fa472127e9a..7c111bbdc2af 100644
--- a/drivers/regulator/s5m8767.c
+++ b/drivers/regulator/s5m8767.c
@@ -544,14 +544,18 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
 	rdata = devm_kcalloc(&pdev->dev,
 			     pdata->num_regulators, sizeof(*rdata),
 			     GFP_KERNEL);
-	if (!rdata)
+	if (!rdata) {
+		of_node_put(regulators_np);
 		return -ENOMEM;
+	}
 
 	rmode = devm_kcalloc(&pdev->dev,
 			     pdata->num_regulators, sizeof(*rmode),
 			     GFP_KERNEL);
-	if (!rmode)
+	if (!rmode) {
+		of_node_put(regulators_np);
 		return -ENOMEM;
+	}
 
 	pdata->regulators = rdata;
 	pdata->opmode = rmode;
@@ -573,10 +577,13 @@ static int s5m8767_pmic_dt_parse_pdata(struct platform_device *pdev,
 			"s5m8767,pmic-ext-control",
 			GPIOD_OUT_HIGH | GPIOD_FLAGS_BIT_NONEXCLUSIVE,
 			"s5m8767");
-		if (PTR_ERR(rdata->ext_control_gpiod) == -ENOENT)
+		if (PTR_ERR(rdata->ext_control_gpiod) == -ENOENT) {
 			rdata->ext_control_gpiod = NULL;
-		else if (IS_ERR(rdata->ext_control_gpiod))
+		} else if (IS_ERR(rdata->ext_control_gpiod)) {
+			of_node_put(reg_np);
+			of_node_put(regulators_np);
 			return PTR_ERR(rdata->ext_control_gpiod);
+		}
 
 		rdata->id = i;
 		rdata->initdata = of_get_regulator_init_data(
diff --git a/include/linux/mfd/abx500/ab8500.h b/include/linux/mfd/abx500/ab8500.h
index 524a7e4702c2..302a330c5c84 100644
--- a/include/linux/mfd/abx500/ab8500.h
+++ b/include/linux/mfd/abx500/ab8500.h
@@ -368,7 +368,6 @@ struct ab8500 {
 	int it_latchhier_num;
 };
 
-struct ab8500_regulator_platform_data;
 struct ab8500_codec_platform_data;
 struct ab8500_sysctrl_platform_data;
 
@@ -376,11 +375,9 @@ struct ab8500_sysctrl_platform_data;
  * struct ab8500_platform_data - AB8500 platform data
  * @irq_base: start of AB8500 IRQs, AB8500_NR_IRQS will be used
  * @init: board-specific initialization after detection of ab8500
- * @regulator: machine-specific constraints for regulators
  */
 struct ab8500_platform_data {
 	void (*init) (struct ab8500 *);
-	struct ab8500_regulator_platform_data *regulator;
 	struct ab8500_codec_platform_data *codec;
 	struct ab8500_sysctrl_platform_data *sysctrl;
 };
diff --git a/include/linux/mfd/rohm-generic.h b/include/linux/mfd/rohm-generic.h
index 4283b5b33e04..2b85b9deb03a 100644
--- a/include/linux/mfd/rohm-generic.h
+++ b/include/linux/mfd/rohm-generic.h
@@ -20,14 +20,12 @@ struct rohm_regmap_dev {
 	struct regmap *regmap;
 };
 
-enum {
-	ROHM_DVS_LEVEL_UNKNOWN,
-	ROHM_DVS_LEVEL_RUN,
-	ROHM_DVS_LEVEL_IDLE,
-	ROHM_DVS_LEVEL_SUSPEND,
-	ROHM_DVS_LEVEL_LPSR,
-	ROHM_DVS_LEVEL_MAX = ROHM_DVS_LEVEL_LPSR,
-};
+#define ROHM_DVS_LEVEL_RUN		BIT(0)
+#define ROHM_DVS_LEVEL_IDLE		BIT(1)
+#define ROHM_DVS_LEVEL_SUSPEND		BIT(2)
+#define ROHM_DVS_LEVEL_LPSR		BIT(3)
+#define ROHM_DVS_LEVEL_VALID_AMOUNT	4
+#define ROHM_DVS_LEVEL_UNKNOWN		0
 
 /**
  * struct rohm_dvs_config - dynamic voltage scaling register descriptions
diff --git a/include/linux/regulator/ab8500.h b/include/linux/regulator/ab8500.h
deleted file mode 100644
index 3ab1ddf151a2..000000000000
--- a/include/linux/regulator/ab8500.h
+++ /dev/null
@@ -1,166 +0,0 @@
-/* SPDX-License-Identifier: GPL-2.0-only */
-/*
- * Copyright (C) ST-Ericsson SA 2010
- *
- * Authors: Sundar Iyer <sundar.iyer@stericsson.com> for ST-Ericsson
- *          Bengt Jonsson <bengt.g.jonsson@stericsson.com> for ST-Ericsson
- *          Daniel Willerud <daniel.willerud@stericsson.com> for ST-Ericsson
- */
-
-#ifndef __LINUX_MFD_AB8500_REGULATOR_H
-#define __LINUX_MFD_AB8500_REGULATOR_H
-
-#include <linux/platform_device.h>
-
-/* AB8500 regulators */
-enum ab8500_regulator_id {
-	AB8500_LDO_AUX1,
-	AB8500_LDO_AUX2,
-	AB8500_LDO_AUX3,
-	AB8500_LDO_INTCORE,
-	AB8500_LDO_TVOUT,
-	AB8500_LDO_AUDIO,
-	AB8500_LDO_ANAMIC1,
-	AB8500_LDO_ANAMIC2,
-	AB8500_LDO_DMIC,
-	AB8500_LDO_ANA,
-	AB8500_NUM_REGULATORS,
-};
-
-/* AB8505 regulators */
-enum ab8505_regulator_id {
-	AB8505_LDO_AUX1,
-	AB8505_LDO_AUX2,
-	AB8505_LDO_AUX3,
-	AB8505_LDO_AUX4,
-	AB8505_LDO_AUX5,
-	AB8505_LDO_AUX6,
-	AB8505_LDO_INTCORE,
-	AB8505_LDO_ADC,
-	AB8505_LDO_AUDIO,
-	AB8505_LDO_ANAMIC1,
-	AB8505_LDO_ANAMIC2,
-	AB8505_LDO_AUX8,
-	AB8505_LDO_ANA,
-	AB8505_NUM_REGULATORS,
-};
-
-/* AB8500 and AB8505 register initialization */
-struct ab8500_regulator_reg_init {
-	int id;
-	u8 mask;
-	u8 value;
-};
-
-#define INIT_REGULATOR_REGISTER(_id, _mask, _value)	\
-	{						\
-		.id = _id,				\
-		.mask = _mask,				\
-		.value = _value,			\
-	}
-
-/* AB8500 registers */
-enum ab8500_regulator_reg {
-	AB8500_REGUREQUESTCTRL2,
-	AB8500_REGUREQUESTCTRL3,
-	AB8500_REGUREQUESTCTRL4,
-	AB8500_REGUSYSCLKREQ1HPVALID1,
-	AB8500_REGUSYSCLKREQ1HPVALID2,
-	AB8500_REGUHWHPREQ1VALID1,
-	AB8500_REGUHWHPREQ1VALID2,
-	AB8500_REGUHWHPREQ2VALID1,
-	AB8500_REGUHWHPREQ2VALID2,
-	AB8500_REGUSWHPREQVALID1,
-	AB8500_REGUSWHPREQVALID2,
-	AB8500_REGUSYSCLKREQVALID1,
-	AB8500_REGUSYSCLKREQVALID2,
-	AB8500_REGUMISC1,
-	AB8500_VAUDIOSUPPLY,
-	AB8500_REGUCTRL1VAMIC,
-	AB8500_VPLLVANAREGU,
-	AB8500_VREFDDR,
-	AB8500_EXTSUPPLYREGU,
-	AB8500_VAUX12REGU,
-	AB8500_VRF1VAUX3REGU,
-	AB8500_VAUX1SEL,
-	AB8500_VAUX2SEL,
-	AB8500_VRF1VAUX3SEL,
-	AB8500_REGUCTRL2SPARE,
-	AB8500_REGUCTRLDISCH,
-	AB8500_REGUCTRLDISCH2,
-	AB8500_NUM_REGULATOR_REGISTERS,
-};
-
-/* AB8505 registers */
-enum ab8505_regulator_reg {
-	AB8505_REGUREQUESTCTRL1,
-	AB8505_REGUREQUESTCTRL2,
-	AB8505_REGUREQUESTCTRL3,
-	AB8505_REGUREQUESTCTRL4,
-	AB8505_REGUSYSCLKREQ1HPVALID1,
-	AB8505_REGUSYSCLKREQ1HPVALID2,
-	AB8505_REGUHWHPREQ1VALID1,
-	AB8505_REGUHWHPREQ1VALID2,
-	AB8505_REGUHWHPREQ2VALID1,
-	AB8505_REGUHWHPREQ2VALID2,
-	AB8505_REGUSWHPREQVALID1,
-	AB8505_REGUSWHPREQVALID2,
-	AB8505_REGUSYSCLKREQVALID1,
-	AB8505_REGUSYSCLKREQVALID2,
-	AB8505_REGUVAUX4REQVALID,
-	AB8505_REGUMISC1,
-	AB8505_VAUDIOSUPPLY,
-	AB8505_REGUCTRL1VAMIC,
-	AB8505_VSMPSAREGU,
-	AB8505_VSMPSBREGU,
-	AB8505_VSAFEREGU, /* NOTE! PRCMU register */
-	AB8505_VPLLVANAREGU,
-	AB8505_EXTSUPPLYREGU,
-	AB8505_VAUX12REGU,
-	AB8505_VRF1VAUX3REGU,
-	AB8505_VSMPSASEL1,
-	AB8505_VSMPSASEL2,
-	AB8505_VSMPSASEL3,
-	AB8505_VSMPSBSEL1,
-	AB8505_VSMPSBSEL2,
-	AB8505_VSMPSBSEL3,
-	AB8505_VSAFESEL1, /* NOTE! PRCMU register */
-	AB8505_VSAFESEL2, /* NOTE! PRCMU register */
-	AB8505_VSAFESEL3, /* NOTE! PRCMU register */
-	AB8505_VAUX1SEL,
-	AB8505_VAUX2SEL,
-	AB8505_VRF1VAUX3SEL,
-	AB8505_VAUX4REQCTRL,
-	AB8505_VAUX4REGU,
-	AB8505_VAUX4SEL,
-	AB8505_REGUCTRLDISCH,
-	AB8505_REGUCTRLDISCH2,
-	AB8505_REGUCTRLDISCH3,
-	AB8505_CTRLVAUX5,
-	AB8505_CTRLVAUX6,
-	AB8505_NUM_REGULATOR_REGISTERS,
-};
-
-/* AB8500 external regulators */
-struct ab8500_ext_regulator_cfg {
-	bool hwreq; /* requires hw mode or high power mode */
-};
-
-enum ab8500_ext_regulator_id {
-	AB8500_EXT_SUPPLY1,
-	AB8500_EXT_SUPPLY2,
-	AB8500_EXT_SUPPLY3,
-	AB8500_NUM_EXT_REGULATORS,
-};
-
-/* AB8500 regulator platform data */
-struct ab8500_regulator_platform_data {
-	int num_reg_init;
-	struct ab8500_regulator_reg_init *reg_init;
-	int num_regulator;
-	struct regulator_init_data *regulator;
-	int num_ext_regulator;
-	struct regulator_init_data *ext_regulator;
-};
-
-#endif
diff --git a/include/linux/regulator/mt6315-regulator.h b/include/linux/regulator/mt6315-regulator.h
new file mode 100644
index 000000000000..3b80d3f3910c
--- /dev/null
+++ b/include/linux/regulator/mt6315-regulator.h
@@ -0,0 +1,44 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (c) 2021 MediaTek Inc.
+ */
+
+#ifndef __LINUX_REGULATOR_MT6315_H
+#define __LINUX_REGULATOR_MT6315_H
+
+#define MT6315_RP	3
+#define MT6315_PP	6
+#define MT6315_SP	7
+
+enum {
+	MT6315_VBUCK1 = 0,
+	MT6315_VBUCK2,
+	MT6315_VBUCK3,
+	MT6315_VBUCK4,
+	MT6315_VBUCK_MAX,
+};
+
+/* Register */
+#define MT6315_TOP2_ELR7			0x139
+#define MT6315_TOP_TMA_KEY			0x39F
+#define MT6315_TOP_TMA_KEY_H			0x3A0
+#define MT6315_BUCK_TOP_CON0			0x1440
+#define MT6315_BUCK_TOP_CON1			0x1443
+#define MT6315_BUCK_TOP_ELR0			0x1449
+#define MT6315_BUCK_TOP_ELR2			0x144B
+#define MT6315_BUCK_TOP_ELR4			0x144D
+#define MT6315_BUCK_TOP_ELR6			0x144F
+#define MT6315_VBUCK1_DBG0			0x1499
+#define MT6315_VBUCK1_DBG4			0x149D
+#define MT6315_VBUCK2_DBG0			0x1519
+#define MT6315_VBUCK2_DBG4			0x151D
+#define MT6315_VBUCK3_DBG0			0x1599
+#define MT6315_VBUCK3_DBG4			0x159D
+#define MT6315_VBUCK4_DBG0			0x1619
+#define MT6315_VBUCK4_DBG4			0x161D
+#define MT6315_BUCK_TOP_4PHASE_ANA_CON42	0x16B1
+
+#define PROTECTION_KEY_H			0x9C
+#define PROTECTION_KEY				0xEA
+
+#endif /* __LINUX_REGULATOR_MT6315_H */
diff --git a/include/linux/regulator/pca9450.h b/include/linux/regulator/pca9450.h
index 1bbd3014f906..ccdb5320a240 100644
--- a/include/linux/regulator/pca9450.h
+++ b/include/linux/regulator/pca9450.h
@@ -216,4 +216,11 @@ enum {
 #define IRQ_THERM_105			0x02
 #define IRQ_THERM_125			0x01
 
+/* PCA9450_REG_RESET_CTRL bits */
+#define WDOG_B_CFG_MASK			0xC0
+#define WDOG_B_CFG_NONE			0x00
+#define WDOG_B_CFG_WARM			0x40
+#define WDOG_B_CFG_COLD_LDO12		0x80
+#define WDOG_B_CFG_COLD			0xC0
+
 #endif /* __LINUX_REG_PCA9450_H__ */
diff --git a/lib/linear_ranges.c b/lib/linear_ranges.c
index 9495ef3572b7..ced5c15d3f04 100644
--- a/lib/linear_ranges.c
+++ b/lib/linear_ranges.c
@@ -128,7 +128,7 @@ EXPORT_SYMBOL_GPL(linear_range_get_value_array);
  * @selector:	address where found selector value is updated
  * @found:	flag to indicate that given value was in the range
  *
- * Return selector which which range value is closest match for given
+ * Return selector for which range value is closest match for given
  * input value. Value is matching if it is equal or smaller than given
  * value. If given value is in the range, then @found is set true.
  *
@@ -168,11 +168,11 @@ EXPORT_SYMBOL_GPL(linear_range_get_selector_low);
  * @selector:	address where found selector value is updated
  * @found:	flag to indicate that given value was in the range
  *
- * Scan array of ranges for selector which which range value matches given
+ * Scan array of ranges for selector for which range value matches given
  * input value. Value is matching if it is equal or smaller than given
  * value. If given value is found to be in a range scanning is stopped and
  * @found is set true. If a range with values smaller than given value is found
- * but the range max is being smaller than given value, then the ranges
+ * but the range max is being smaller than given value, then the range's
  * biggest selector is updated to @selector but scanning ranges is continued
  * and @found is set to false.
  *
@@ -209,7 +209,7 @@ EXPORT_SYMBOL_GPL(linear_range_get_selector_low_array);
  * @selector:	address where found selector value is updated
  * @found:	flag to indicate that given value was in the range
  *
- * Return selector which which range value is closest match for given
+ * Return selector for which range value is closest match for given
  * input value. Value is matching if it is equal or higher than given
  * value. If given value is in the range, then @found is set true.
  *
author	Linus Torvalds <torvalds@linux-foundation.org>	2021-02-22 18:16:38 +0100
committer	Linus Torvalds <torvalds@linux-foundation.org>	2021-02-22 18:16:38 +0100
commit	d6560052c2f73db59834e9a3c0aba20579aa7059 (patch)
tree	f446d04ca3c3f4fc354f3969dfcda550f39757e0
parent	Merge tag 'regmap-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/bro... (diff)
parent	Merge remote-tracking branch 'regulator/for-5.12' into regulator-next (diff)
download	linux-d6560052c2f73db59834e9a3c0aba20579aa7059.tar.xz linux-d6560052c2f73db59834e9a3c0aba20579aa7059.zip