docs: ABI: cleanup several ABI documents

There are some ABI documents that, while they don't generate
any warnings, they have issues when parsed by get_abi.pl script
on its output result.

Address them, in order to provide a clean output.

Reviewed-by: Tom Rix <trix@redhat.com> # for fpga-manager
Reviewed-By: Kajol Jain<kjain@linux.ibm.com> # for sysfs-bus-event_source-devices-hv_gpci and sysfs-bus-event_source-devices-hv_24x7
Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> #for IIO
Acked-by: Oded Gabbay <oded.gabbay@gmail.com> # for Habanalabs
Acked-by: Vaibhav Jain <vaibhav@linux.ibm.com> # for sysfs-bus-papr-pmem
Acked-by: Cezary Rojewski <cezary.rojewski@intel.com> # for catpt
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Acked-by: Ilya Dryomov <idryomov@gmail.com> # for rbd
Acked-by: Jonathan Corbet <corbet@lwn.net>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/5bc78e5b68ed1e9e39135173857cb2e753be868f.1604042072.git.mchehab+huawei@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>

5 files changed, 43 insertions, 35 deletions

diff --git a/Documentation/ABI/stable/firewire-cdev b/Documentation/ABI/stable/firewire-cdev
index c9e8ff026154..261f85b13154 100644
--- a/Documentation/ABI/stable/firewire-cdev
+++ b/Documentation/ABI/stable/firewire-cdev
@@ -16,6 +16,7 @@ Description:
 		different scope:
 
 		  - The 1394 node which is associated with the file:
+
 			  - Asynchronous request transmission
 			  - Get the Configuration ROM
 			  - Query node ID
@@ -23,6 +24,7 @@ Description:
 			    and local node
 
 		  - The 1394 bus (i.e. "card") to which the node is attached to:
+
 			  - Isochronous stream transmission and reception
 			  - Asynchronous stream transmission and reception
 			  - Asynchronous broadcast request transmission
@@ -35,6 +37,7 @@ Description:
 			  - Bus reset initiation, bus reset event reception
 
 		  - All 1394 buses:
+
 			  - Allocation of IEEE 1212 address ranges on the local
 			    link layers, reception of inbound requests to such
 			    an address range, asynchronous response transmission
@@ -59,50 +62,50 @@ Description:
 		The following file operations are supported:
 
 		open(2)
-		Currently the only useful flags are O_RDWR.
+		    Currently the only useful flags are O_RDWR.
 
 		ioctl(2)
-		Initiate various actions.  Some take immediate effect, others
-		are performed asynchronously while or after the ioctl returns.
-		See the inline documentation in <linux/firewire-cdev.h> for
-		descriptions of all ioctls.
+		    Initiate various actions.  Some take immediate effect, others
+		    are performed asynchronously while or after the ioctl returns.
+		    See the inline documentation in <linux/firewire-cdev.h> for
+		    descriptions of all ioctls.
 
 		poll(2), select(2), epoll_wait(2) etc.
-		Watch for events to become available to be read.
+		    Watch for events to become available to be read.
 
 		read(2)
-		Receive various events.  There are solicited events like
-		outbound asynchronous transaction completion or isochronous
-		buffer completion, and unsolicited events such as bus resets,
-		request reception, or PHY packet reception.  Always use a read
-		buffer which is large enough to receive the largest event that
-		could ever arrive.  See <linux/firewire-cdev.h> for descriptions
-		of all event types and for which ioctls affect reception of
-		events.
+		    Receive various events.  There are solicited events like
+		    outbound asynchronous transaction completion or isochronous
+		    buffer completion, and unsolicited events such as bus resets,
+		    request reception, or PHY packet reception.  Always use a read
+		    buffer which is large enough to receive the largest event that
+		    could ever arrive.  See <linux/firewire-cdev.h> for descriptions
+		    of all event types and for which ioctls affect reception of
+		    events.
 
 		mmap(2)
-		Allocate a DMA buffer for isochronous reception or transmission
-		and map it into the process address space.  The arguments should
-		be used as follows:  addr = NULL, length = the desired buffer
-		size, i.e. number of packets times size of largest packet,
-		prot = at least PROT_READ for reception and at least PROT_WRITE
-		for transmission, flags = MAP_SHARED, fd = the handle to the
-		/dev/fw*, offset = 0.
+		    Allocate a DMA buffer for isochronous reception or transmission
+		    and map it into the process address space.  The arguments should
+		    be used as follows:  addr = NULL, length = the desired buffer
+		    size, i.e. number of packets times size of largest packet,
+		    prot = at least PROT_READ for reception and at least PROT_WRITE
+		    for transmission, flags = MAP_SHARED, fd = the handle to the
+		    /dev/fw*, offset = 0.
 
 		Isochronous reception works in packet-per-buffer fashion except
 		for multichannel reception which works in buffer-fill mode.
 
 		munmap(2)
-		Unmap the isochronous I/O buffer from the process address space.
+		    Unmap the isochronous I/O buffer from the process address space.
 
 		close(2)
-		Besides stopping and freeing I/O contexts that were associated
-		with the file descriptor, back out any changes to the local
-		nodes' Configuration ROM.  Deallocate isochronous channels and
-		bandwidth at the IRM that were marked for kernel-assisted
-		re- and deallocation.
-
-Users:		libraw1394
-		libdc1394
-		libhinawa
+		    Besides stopping and freeing I/O contexts that were associated
+		    with the file descriptor, back out any changes to the local
+		    nodes' Configuration ROM.  Deallocate isochronous channels and
+		    bandwidth at the IRM that were marked for kernel-assisted
+		    re- and deallocation.
+
+Users:		libraw1394;
+		libdc1394;
+		libhinawa;
 		tools like linux-firewire-utils, fwhack, ...
diff --git a/Documentation/ABI/stable/sysfs-acpi-pmprofile b/Documentation/ABI/stable/sysfs-acpi-pmprofile
index fd97d22b677f..2d6314f0e4e4 100644
--- a/Documentation/ABI/stable/sysfs-acpi-pmprofile
+++ b/Documentation/ABI/stable/sysfs-acpi-pmprofile
@@ -1,8 +1,8 @@
-What: 		/sys/firmware/acpi/pm_profile
+What:		/sys/firmware/acpi/pm_profile
 Date:		03-Nov-2011
 KernelVersion:	v3.2
 Contact:	linux-acpi@vger.kernel.org
-Description: 	The ACPI pm_profile sysfs interface exports the platform
+Description:	The ACPI pm_profile sysfs interface exports the platform
 		power management (and performance) requirement expectations
 		as provided by BIOS. The integer value is directly passed as
 		retrieved from the FADT ACPI table.
diff --git a/Documentation/ABI/stable/sysfs-bus-w1 b/Documentation/ABI/stable/sysfs-bus-w1
index 992dfb183ed0..5cd5e872bcae 100644
--- a/Documentation/ABI/stable/sysfs-bus-w1
+++ b/Documentation/ABI/stable/sysfs-bus-w1
@@ -6,6 +6,7 @@ Description:	Bus scanning interval, microseconds component.
 		control systems are attached/generate presence for as short as
 		100 ms - hence the tens-to-hundreds milliseconds scan intervals
 		are required.
+
 		see Documentation/w1/w1-generic.rst for detailed information.
 Users:		any user space application which wants to know bus scanning
 		interval
diff --git a/Documentation/ABI/stable/sysfs-class-tpm b/Documentation/ABI/stable/sysfs-class-tpm
index ec464cf7861a..91ca63ec7581 100644
--- a/Documentation/ABI/stable/sysfs-class-tpm
+++ b/Documentation/ABI/stable/sysfs-class-tpm
@@ -191,6 +191,6 @@ Contact:	linux-integrity@vger.kernel.org
 Description:	The "tpm_version_major" property shows the TCG spec major version
 		implemented by the TPM device.
 
-		Example output:
+		Example output::
 
-		2
+		  2
diff --git a/Documentation/ABI/stable/sysfs-driver-speakup b/Documentation/ABI/stable/sysfs-driver-speakup
index c6a32c434ce9..792f58ba327d 100644
--- a/Documentation/ABI/stable/sysfs-driver-speakup
+++ b/Documentation/ABI/stable/sysfs-driver-speakup
@@ -69,6 +69,7 @@ Description:	Controls if typing interrupts output from speakup. With
 		speakup if for example
 		the say screen command is used before the
 		entire screen  is read.
+
 		With no_interrupt set to one, if the say
 		screen command is used, and one then types on the keyboard,
 		speakup will continue to say the whole screen regardless until
@@ -215,8 +216,10 @@ Description:	This file contains names for key states.
 		Again, these are part of the help system.  For instance, if you
 		had pressed speakup + keypad 3, you would hear:
 		"speakup keypad 3 is go to bottom edge."
+
 		The speakup key is depressed, so the name of the key state is
 		speakup.
+
 		This part of the message comes from the states collection.
 
 What:		/sys/accessibility/speakup/i18n/characters
@@ -297,6 +300,7 @@ KernelVersion:	2.6
 Contact:	speakup@linux-speakup.org
 Description:	Controls if punctuation is spoken by speakup, or by the
 		synthesizer.
+
 		For example, speakup speaks ">" as "greater", while
 		the espeak synthesizer used by the soft driver speaks "greater
 		than". Zero lets speakup speak the punctuation. One lets the