Merge branch 'next' into for-linus

8 files changed, 157 insertions, 10 deletions

diff --git a/Documentation/ABI/testing/pstore b/Documentation/ABI/testing/pstore
index ddf451ee2a08..ff1df4e3b059 100644
--- a/Documentation/ABI/testing/pstore
+++ b/Documentation/ABI/testing/pstore
@@ -39,3 +39,9 @@ Description:	Generic interface to platform dependent persistent storage.
 		multiple) files based on the record size of the underlying
 		persistent storage until at least this amount is reached.
 		Default is 10 Kbytes.
+
+		Pstore only supports one backend at a time. If multiple
+		backends are available, the preferred backend may be
+		set by passing the pstore.backend= argument to the kernel at
+		boot time.
+
diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480 b/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480
new file mode 100644
index 000000000000..9de269bb0ae5
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-fsa9480
@@ -0,0 +1,21 @@
+What:		/sys/bus/i2c/devices/.../device
+Date:		February 2011
+Contact:	Minkyu Kang <mk7.kang@samsung.com>
+Description:
+		show what device is attached
+		NONE - no device
+		USB - USB device is attached
+		UART - UART is attached
+		CHARGER - Charger is attaced
+		JIG - JIG is attached
+
+What:		/sys/bus/i2c/devices/.../switch
+Date:		February 2011
+Contact:	Minkyu Kang <mk7.kang@samsung.com>
+Description:
+		show or set the state of manual switch
+		VAUDIO - switch to VAUDIO path
+		UART - switch to UART path
+		AUDIO - switch to AUDIO path
+		DHOST - switch to DHOST path
+		AUTO - switch automatically by device
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
index c1b53b8bc2ae..65e6e5dd67e8 100644
--- a/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
+++ b/Documentation/ABI/testing/sysfs-driver-hid-roccat-koneplus
@@ -92,6 +92,14 @@ Description:	The mouse has a tracking- and a distance-control-unit. These
 		This file is writeonly.
 Users:		http://roccat.sourceforge.net
 
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/talk
+Date:		May 2011
+Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
+Description:	Used to active some easy* functions of the mouse from outside.
+		The data has to be 16 bytes long.
+		This file is writeonly.
+Users:		http://roccat.sourceforge.net
+
 What:		/sys/bus/usb/devices/<busnum>-<devnum>:<config num>.<interface num>/<hid-bus>:<vendor-id>:<product-id>.<num>/koneplus/roccatkoneplus<minor>/tcu
 Date:		October 2010
 Contact:	Stefan Achatz <erazor_de@users.sourceforge.net>
diff --git a/Documentation/ABI/testing/sysfs-driver-hid-wiimote b/Documentation/ABI/testing/sysfs-driver-hid-wiimote
new file mode 100644
index 000000000000..5d5a16ea57c6
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-hid-wiimote
@@ -0,0 +1,10 @@
+What:		/sys/bus/hid/drivers/wiimote/<dev>/led1
+What:		/sys/bus/hid/drivers/wiimote/<dev>/led2
+What:		/sys/bus/hid/drivers/wiimote/<dev>/led3
+What:		/sys/bus/hid/drivers/wiimote/<dev>/led4
+Date:		July 2011
+KernelVersion:	3.1
+Contact:	David Herrmann <dh.herrmann@googlemail.com>
+Description:	Make it possible to set/get current led state. Reading from it
+		returns 0 if led is off and 1 if it is on. Writing 0 to it
+		disables the led, writing 1 enables it.
diff --git a/Documentation/ABI/testing/sysfs-driver-wacom b/Documentation/ABI/testing/sysfs-driver-wacom
new file mode 100644
index 000000000000..82d4df136444
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-driver-wacom
@@ -0,0 +1,72 @@
+What:		/sys/class/hidraw/hidraw*/device/speed
+Date:		April 2010
+Kernel Version:	2.6.35
+Contact:	linux-bluetooth@vger.kernel.org
+Description:
+		The /sys/class/hidraw/hidraw*/device/speed file controls
+		reporting speed of Wacom bluetooth tablet. Reading from
+		this file returns 1 if tablet reports in high speed mode
+		or 0 otherwise. Writing to this file one of these values
+		switches reporting speed.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/led
+Date:		August 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		Attribute group for control of the status LEDs and the OLEDs.
+		This attribute group is only available for Intuos 4 M, L,
+		and XL (with LEDs and OLEDs) and Cintiq 21UX2 (LEDs only).
+		Therefore its presence implicitly signifies the presence of
+		said LEDs and OLEDs on the tablet device.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status0_luminance
+Date:		August 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		Writing to this file sets the status LED luminance (1..127)
+		when the stylus does not touch the tablet surface, and no
+		button is pressed on the stylus. This luminance level is
+		normally lower than the level when a button is pressed.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status1_luminance
+Date:		August 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		Writing to this file sets the status LED luminance (1..127)
+		when the stylus touches the tablet surface, or any button is
+		pressed on the stylus.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led0_select
+Date:		August 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		Writing to this file sets which one of the four (for Intuos 4)
+		or of the right four (for Cintiq 21UX2) status LEDs is active (0..3).
+		The other three LEDs on the same side are always inactive.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/status_led1_select
+Date:		September 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		Writing to this file sets which one of the left four (for Cintiq 21UX2)
+		status LEDs is active (0..3). The other three LEDs on the left are always
+		inactive.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/buttons_luminance
+Date:		August 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		Writing to this file sets the overall luminance level (0..15)
+		of all eight button OLED displays.
+
+What:		/sys/bus/usb/devices/<busnum>-<devnum>:<cfg>.<intf>/wacom_led/button<n>_rawimg
+Date:		August 2011
+Contact:	linux-input@vger.kernel.org
+Description:
+		When writing a 1024 byte raw image in Wacom Intuos 4
+		interleaving format to the file, the image shows up on Button N
+		of the device. The image is a 64x32 pixel 4-bit gray image. The
+		1024 byte binary is split up into 16x 64 byte chunks. Each 64
+		byte chunk encodes the image data for two consecutive lines on
+		the display. The low nibble of each byte contains the first
+		line, and the high nibble contains the second line.
diff --git a/Documentation/ABI/testing/sysfs-module b/Documentation/ABI/testing/sysfs-module
index cfcec3bffc0a..9489ea8e294c 100644
--- a/Documentation/ABI/testing/sysfs-module
+++ b/Documentation/ABI/testing/sysfs-module
@@ -10,3 +10,26 @@ KernelVersion:	2.6.35
 Contact:	masa-korg@dsn.okisemi.com
 Description:	Write/read Option ROM data.
 
+
+What:		/sys/module/ehci_hcd/drivers/.../uframe_periodic_max
+Date:		July 2011
+KernelVersion:	3.1
+Contact:	Kirill Smelkov <kirr@mns.spb.ru>
+Description:	Maximum time allowed for periodic transfers per microframe (μs)
+
+		[ USB 2.0 sets maximum allowed time for periodic transfers per
+		  microframe to be 80%, that is 100 microseconds out of 125
+		  microseconds (full microframe).
+
+		  However there are cases, when 80% max isochronous bandwidth is
+		  too limiting. For example two video streams could require 110
+		  microseconds of isochronous bandwidth per microframe to work
+		  together. ]
+
+		Through this setting it is possible to raise the limit so that
+		the host controller would allow allocating more than 100
+		microseconds of periodic bandwidth per microframe.
+
+		Beware, non-standard modes are usually not thoroughly tested by
+		hardware designers, and the hardware can malfunction when this
+		setting differ from default 100.
diff --git a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop
index 807fca2ae2a4..ff53183c3848 100644
--- a/Documentation/ABI/testing/sysfs-platform-ideapad-laptop
+++ b/Documentation/ABI/testing/sysfs-platform-ideapad-laptop
@@ -4,3 +4,20 @@ KernelVersion:	2.6.37
 Contact:	"Ike Panhc <ike.pan@canonical.com>"
 Description:
 		Control the power of camera module. 1 means on, 0 means off.
+
+What:		/sys/devices/platform/ideapad/cfg
+Date:		Jun 2011
+KernelVersion:	3.1
+Contact:	"Ike Panhc <ike.pan@canonical.com>"
+Description:
+		Ideapad capability bits.
+		Bit 8-10: 1 - Intel graphic only
+		          2 - ATI graphic only
+		          3 - Nvidia graphic only
+		          4 - Intel and ATI graphic
+		          5 - Intel and Nvidia graphic
+		Bit 16: Bluetooth exist (1 for exist)
+		Bit 17: 3G exist (1 for exist)
+		Bit 18: Wifi exist (1 for exist)
+		Bit 19: Camera exist (1 for exist)
+
diff --git a/Documentation/ABI/testing/sysfs-wacom b/Documentation/ABI/testing/sysfs-wacom
deleted file mode 100644
index 1517976e25c4..000000000000
--- a/Documentation/ABI/testing/sysfs-wacom
+++ /dev/null
@@ -1,10 +0,0 @@
-What:		/sys/class/hidraw/hidraw*/device/speed
-Date:		April 2010
-Kernel Version:	2.6.35
-Contact:	linux-bluetooth@vger.kernel.org
-Description:
-		The /sys/class/hidraw/hidraw*/device/speed file controls
-		reporting speed of wacom bluetooth tablet. Reading from
-		this file returns 1 if tablet reports in high speed mode
-		or 0 otherwise. Writing to this file one of these values
-		switches reporting speed.