Merge branch 'linus' into WIP.x86/boot, to fix up conflicts and to pick up updates

 Conflicts:
	arch/x86/xen/setup.c

Signed-off-by: Ingo Molnar <mingo@kernel.org>

15 files changed, 194 insertions, 232 deletions

diff --git a/Documentation/ABI/obsolete/sysfs-block-zram b/Documentation/ABI/obsolete/sysfs-block-zram
deleted file mode 100644
index 720ea92cfb2e..000000000000
--- a/Documentation/ABI/obsolete/sysfs-block-zram
+++ /dev/null
@@ -1,119 +0,0 @@
-What:		/sys/block/zram<id>/num_reads
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The num_reads file is read-only and specifies the number of
-		reads (failed or successful) done on this device.
-		Now accessible via zram<id>/stat node.
-
-What:		/sys/block/zram<id>/num_writes
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The num_writes file is read-only and specifies the number of
-		writes (failed or successful) done on this device.
-		Now accessible via zram<id>/stat node.
-
-What:		/sys/block/zram<id>/invalid_io
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The invalid_io file is read-only and specifies the number of
-		non-page-size-aligned I/O requests issued to this device.
-		Now accessible via zram<id>/io_stat node.
-
-What:		/sys/block/zram<id>/failed_reads
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The failed_reads file is read-only and specifies the number of
-		failed reads happened on this device.
-		Now accessible via zram<id>/io_stat node.
-
-What:		/sys/block/zram<id>/failed_writes
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The failed_writes file is read-only and specifies the number of
-		failed writes happened on this device.
-		Now accessible via zram<id>/io_stat node.
-
-What:		/sys/block/zram<id>/notify_free
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The notify_free file is read-only. Depending on device usage
-		scenario it may account a) the number of pages freed because
-		of swap slot free notifications or b) the number of pages freed
-		because of REQ_DISCARD requests sent by bio. The former ones
-		are sent to a swap block device when a swap slot is freed, which
-		implies that this disk is being used as a swap disk. The latter
-		ones are sent by filesystem mounted with discard option,
-		whenever some data blocks are getting discarded.
-		Now accessible via zram<id>/io_stat node.
-
-What:		/sys/block/zram<id>/zero_pages
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The zero_pages file is read-only and specifies number of zero
-		filled pages written to this disk. No memory is allocated for
-		such pages.
-		Now accessible via zram<id>/mm_stat node.
-
-What:		/sys/block/zram<id>/orig_data_size
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The orig_data_size file is read-only and specifies uncompressed
-		size of data stored in this disk. This excludes zero-filled
-		pages (zero_pages) since no memory is allocated for them.
-		Unit: bytes
-		Now accessible via zram<id>/mm_stat node.
-
-What:		/sys/block/zram<id>/compr_data_size
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The compr_data_size file is read-only and specifies compressed
-		size of data stored in this disk. So, compression ratio can be
-		calculated using orig_data_size and this statistic.
-		Unit: bytes
-		Now accessible via zram<id>/mm_stat node.
-
-What:		/sys/block/zram<id>/mem_used_total
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The mem_used_total file is read-only and specifies the amount
-		of memory, including allocator fragmentation and metadata
-		overhead, allocated for this disk. So, allocator space
-		efficiency can be calculated using compr_data_size and this
-		statistic.
-		Unit: bytes
-		Now accessible via zram<id>/mm_stat node.
-
-What:		/sys/block/zram<id>/mem_used_max
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The mem_used_max file is read/write and specifies the amount
-		of maximum memory zram have consumed to store compressed data.
-		For resetting the value, you should write "0". Otherwise,
-		you could see -EINVAL.
-		Unit: bytes
-		Downgraded to write-only node: so it's possible to set new
-		value only; its current value is stored in zram<id>/mm_stat
-		node.
-
-What:		/sys/block/zram<id>/mem_limit
-Date:		August 2015
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The mem_limit file is read/write and specifies the maximum
-		amount of memory ZRAM can use to store the compressed data.
-		The limit could be changed in run time and "0" means disable
-		the limit.  No limit is the initial state.  Unit: bytes
-		Downgraded to write-only node: so it's possible to set new
-		value only; its current value is stored in zram<id>/mm_stat
-		node.
diff --git a/Documentation/ABI/testing/configfs-rdma_cm b/Documentation/ABI/testing/configfs-rdma_cm
index 5c389aaf5291..74f9506f42e7 100644
--- a/Documentation/ABI/testing/configfs-rdma_cm
+++ b/Documentation/ABI/testing/configfs-rdma_cm
@@ -20,3 +20,11 @@ Description: 	RDMA-CM based connections from HCA <hca> at port <port-num>
 		will be initiated with this RoCE type as default.
 		The possible RoCE types are either "IB/RoCE v1" or "RoCE v2".
 		This parameter has RW access.
+
+What: 		/config/rdma_cm/<hca>/ports/<port-num>/default_roce_tos
+Date: 		February 7, 2017
+KernelVersion:  4.11.0
+Description: 	RDMA-CM QPs from HCA <hca> at port <port-num>
+		will be created with this TOS as default.
+		This can be overridden by using the rdma_set_option API.
+		The possible RoCE TOS values are 0-255.
diff --git a/Documentation/ABI/testing/sysfs-block-zram b/Documentation/ABI/testing/sysfs-block-zram
index 4518d30b8c2e..451b6d882b2c 100644
--- a/Documentation/ABI/testing/sysfs-block-zram
+++ b/Documentation/ABI/testing/sysfs-block-zram
@@ -22,41 +22,6 @@ Description:
 		device. The reset operation frees all the memory associated
 		with this device.
 
-What:		/sys/block/zram<id>/num_reads
-Date:		August 2010
-Contact:	Nitin Gupta <ngupta@vflare.org>
-Description:
-		The num_reads file is read-only and specifies the number of
-		reads (failed or successful) done on this device.
-
-What:		/sys/block/zram<id>/num_writes
-Date:		August 2010
-Contact:	Nitin Gupta <ngupta@vflare.org>
-Description:
-		The num_writes file is read-only and specifies the number of
-		writes (failed or successful) done on this device.
-
-What:		/sys/block/zram<id>/invalid_io
-Date:		August 2010
-Contact:	Nitin Gupta <ngupta@vflare.org>
-Description:
-		The invalid_io file is read-only and specifies the number of
-		non-page-size-aligned I/O requests issued to this device.
-
-What:		/sys/block/zram<id>/failed_reads
-Date:		February 2014
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The failed_reads file is read-only and specifies the number of
-		failed reads happened on this device.
-
-What:		/sys/block/zram<id>/failed_writes
-Date:		February 2014
-Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
-Description:
-		The failed_writes file is read-only and specifies the number of
-		failed writes happened on this device.
-
 What:		/sys/block/zram<id>/max_comp_streams
 Date:		February 2014
 Contact:	Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
@@ -73,74 +38,24 @@ Description:
 		available and selected compression algorithms, change
 		compression algorithm selection.
 
-What:		/sys/block/zram<id>/notify_free
-Date:		August 2010
-Contact:	Nitin Gupta <ngupta@vflare.org>
-Description:
-		The notify_free file is read-only. Depending on device usage
-		scenario it may account a) the number of pages freed because
-		of swap slot free notifications or b) the number of pages freed
-		because of REQ_DISCARD requests sent by bio. The former ones
-		are sent to a swap block device when a swap slot is freed, which
-		implies that this disk is being used as a swap disk. The latter
-		ones are sent by filesystem mounted with discard option,
-		whenever some data blocks are getting discarded.
-
-What:		/sys/block/zram<id>/zero_pages
-Date:		August 2010
-Contact:	Nitin Gupta <ngupta@vflare.org>
-Description:
-		The zero_pages file is read-only and specifies number of zero
-		filled pages written to this disk. No memory is allocated for
-		such pages.
-
-What:		/sys/block/zram<id>/orig_data_size
-Date:		August 2010
-Contact:	Nitin Gupta <ngupta@vflare.org>
-Description:
-		The orig_data_size file is read-only and specifies uncompressed
-		size of data stored in this disk. This excludes zero-filled
-		pages (zero_pages) since no memory is allocated for them.
-		Unit: bytes
-
-What:		/sys/block/zram<id>/compr_data_size
-Date:		August 2010
-Contact:	Nitin Gupta <ngupta@vflare.org>
-Description:
-		The compr_data_size file is read-only and specifies compressed
-		size of data stored in this disk. So, compression ratio can be
-		calculated using orig_data_size and this statistic.
-		Unit: bytes
-
-What:		/sys/block/zram<id>/mem_used_total
-Date:		August 2010
-Contact:	Nitin Gupta <ngupta@vflare.org>
-Description:
-		The mem_used_total file is read-only and specifies the amount
-		of memory, including allocator fragmentation and metadata
-		overhead, allocated for this disk. So, allocator space
-		efficiency can be calculated using compr_data_size and this
-		statistic.
-		Unit: bytes
-
 What:		/sys/block/zram<id>/mem_used_max
 Date:		August 2014
 Contact:	Minchan Kim <minchan@kernel.org>
 Description:
-		The mem_used_max file is read/write and specifies the amount
-		of maximum memory zram have consumed to store compressed data.
-		For resetting the value, you should write "0". Otherwise,
-		you could see -EINVAL.
+		The mem_used_max file is write-only and is used to reset
+		the counter of maximum memory zram have consumed to store
+		compressed data. For resetting the value, you should write
+		"0". Otherwise, you could see -EINVAL.
 		Unit: bytes
 
 What:		/sys/block/zram<id>/mem_limit
 Date:		August 2014
 Contact:	Minchan Kim <minchan@kernel.org>
 Description:
-		The mem_limit file is read/write and specifies the maximum
-		amount of memory ZRAM can use to store the compressed data.  The
-		limit could be changed in run time and "0" means disable the
-		limit.  No limit is the initial state.  Unit: bytes
+		The mem_limit file is write-only and specifies the maximum
+		amount of memory ZRAM can use to store the compressed data.
+		The limit could be changed in run time and "0" means disable
+		the limit. No limit is the initial state.  Unit: bytes
 
 What:		/sys/block/zram<id>/compact
 Date:		August 2015
diff --git a/Documentation/ABI/testing/sysfs-bus-i2c-devices-bq32k b/Documentation/ABI/testing/sysfs-bus-i2c-devices-bq32k
new file mode 100644
index 000000000000..398b258fb770
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-i2c-devices-bq32k
@@ -0,0 +1,7 @@
+What:		/sys/bus/i2c/devices/.../trickle_charge_bypass
+Date:		Jan 2017
+KernelVersion:	4.11
+Contact:	Enric Balletbo i Serra <eballetbo@gmail.com>
+Description:    Attribute for enable/disable the trickle charge bypass
+		The trickle_charge_bypass attribute allows the userspace to
+                enable/disable the Trickle charge FET bypass.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index b8f220f978dd..530809ccfacf 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -170,6 +170,16 @@ Description:
 		Has all of the equivalent parameters as per voltageY. Units
 		after application of scale and offset are m/s^2.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_x_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_y_raw
+What:		/sys/bus/iio/devices/iio:deviceX/in_gravity_z_raw
+KernelVersion:	4.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Gravity in direction x, y or z (may be arbitrarily assigned
+		but should match other such assignments on device).
+		Units after application of scale and offset are m/s^2.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_raw
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_raw
@@ -805,7 +815,7 @@ Description:
 		attribute. E.g. if in_voltage0_raw_thresh_rising_value is set to 1200
 		and in_voltage0_raw_thresh_rising_hysteresis is set to 50. The event
 		will get activated once in_voltage0_raw goes above 1200 and will become
-		deactived again once the value falls below 1150.
+		deactivated again once the value falls below 1150.
 
 What:		/sys/.../events/in_accel_x_raw_roc_rising_value
 What:		/sys/.../events/in_accel_x_raw_roc_falling_value
@@ -1245,7 +1255,8 @@ Description:
 		reflectivity of infrared or ultrasound emitted.
 		Often these sensors are unit less and as such conversion
 		to SI units is not possible. Higher proximity measurements
-		indicate closer objects, and vice versa.
+		indicate closer objects, and vice versa. Units after
+		application of scale and offset are meters.
 
 What:		/sys/.../iio:deviceX/in_illuminance_input
 What:		/sys/.../iio:deviceX/in_illuminance_raw
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32
new file mode 100644
index 000000000000..efe4c85e3c8b
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-stm32
@@ -0,0 +1,18 @@
+What:		/sys/bus/iio/devices/triggerX/trigger_polarity
+KernelVersion:	4.11
+Contact:	fabrice.gasnier@st.com
+Description:
+		The STM32 ADC can be configured to use external trigger sources
+		(e.g. timers, pwm or exti gpio). Then, it can be tuned to start
+		conversions on external trigger by either:
+		- "rising-edge"
+		- "falling-edge"
+		- "both-edges".
+		Reading returns current trigger polarity.
+		Writing value before enabling conversions sets trigger polarity.
+
+What:		/sys/bus/iio/devices/triggerX/trigger_polarity_available
+KernelVersion:	4.11
+Contact:	fabrice.gasnier@st.com
+Description:
+		List all available trigger_polarity settings.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08 b/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08
new file mode 100644
index 000000000000..0a1ca1487fa9
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-distance-srf08
@@ -0,0 +1,22 @@
+What		/sys/bus/iio/devices/iio:deviceX/sensor_sensitivity
+Date:		January 2017
+KernelVersion:	4.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Show or set the gain boost of the amp, from 0-31 range.
+		default 31
+
+What		/sys/bus/iio/devices/iio:deviceX/sensor_max_range
+Date:		January 2017
+KernelVersion:	4.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+                Show or set the maximum range between the sensor and the
+		first object echoed in meters. Default value is 6.020.
+		This setting limits the time the driver is waiting for a
+		echo.
+		Showing the range of available values is represented as the
+		minimum value, the step and the maximum value, all enclosed
+		in square brackets.
+		Example:
+		[0.043 0.043 11.008]
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32 b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
new file mode 100644
index 000000000000..6534a60037ff
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-timer-stm32
@@ -0,0 +1,29 @@
+What:		/sys/bus/iio/devices/triggerX/master_mode_available
+KernelVersion:	4.11
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the list possible master modes which are:
+		- "reset"     :	The UG bit from the TIMx_EGR register is used as trigger output (TRGO).
+		- "enable"    : The Counter Enable signal CNT_EN is used as trigger output.
+		- "update"    : The update event is selected as trigger output.
+				For instance a master timer can then be used as a prescaler for a slave timer.
+		- "compare_pulse" : The trigger output send a positive pulse when the CC1IF flag is to be set.
+		- "OC1REF"    : OC1REF signal is used as trigger output.
+		- "OC2REF"    : OC2REF signal is used as trigger output.
+		- "OC3REF"    : OC3REF signal is used as trigger output.
+		- "OC4REF"    : OC4REF signal is used as trigger output.
+
+What:		/sys/bus/iio/devices/triggerX/master_mode
+KernelVersion:	4.11
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the current master modes.
+		Writing set the master mode
+
+What:		/sys/bus/iio/devices/triggerX/sampling_frequency
+KernelVersion:	4.11
+Contact:	benjamin.gaignard@st.com
+Description:
+		Reading returns the current sampling frequency.
+		Writing an value different of 0 set and start sampling.
+		Writing 0 stop sampling.
diff --git a/Documentation/ABI/testing/sysfs-class-devfreq-event b/Documentation/ABI/testing/sysfs-class-devfreq-event
new file mode 100644
index 000000000000..ceaf0f686d4a
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-class-devfreq-event
@@ -0,0 +1,25 @@
+What:		/sys/class/devfreq-event/event(x)/
+Date:		January 2017
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		Provide a place in sysfs for the devfreq-event objects.
+		This allows accessing various devfreq-event specific variables.
+		The name of devfreq-event object denoted as 'event(x)' which
+		includes the unique number of 'x' for each devfreq-event object.
+
+What:		/sys/class/devfreq-event/event(x)/name
+Date:		January 2017
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		The /sys/class/devfreq-event/event(x)/name attribute contains
+		the name of the devfreq-event object. This attribute is
+		read-only.
+
+What:		/sys/class/devfreq-event/event(x)/enable_count
+Date:		January 2017
+Contact:	Chanwoo Choi <cw00.choi@samsung.com>
+Description:
+		The /sys/class/devfreq-event/event(x)/enable_count attribute
+		contains the reference count to enable the devfreq-event
+		object. If the device is enabled, the value of attribute is
+		greater than zero.
diff --git a/Documentation/ABI/testing/sysfs-class-led b/Documentation/ABI/testing/sysfs-class-led
index 491cdeedc195..5f67f7ab277b 100644
--- a/Documentation/ABI/testing/sysfs-class-led
+++ b/Documentation/ABI/testing/sysfs-class-led
@@ -23,6 +23,23 @@ Description:
 		If the LED does not support different brightness levels, this
 		should be 1.
 
+What:		/sys/class/leds/<led>/brightness_hw_changed
+Date:		January 2017
+KernelVersion:	4.11
+Description:
+		Last hardware set brightness level for this LED. Some LEDs
+		may be changed autonomously by hardware/firmware. Only LEDs
+		where this happens and the driver can detect this, will have
+		this file.
+
+		This file supports poll() to detect when the hardware changes
+		the brightness.
+
+		Reading this file will return the last brightness level set
+		by the hardware, this may be different from the current
+		brightness. Reading this file when no hw brightness change
+		event has happened will return an ENODATA error.
+
 What:		/sys/class/leds/<led>/trigger
 Date:		March 2006
 KernelVersion:	2.6.17
diff --git a/Documentation/ABI/testing/sysfs-class-rc b/Documentation/ABI/testing/sysfs-class-rc
index b65674da43bb..8be1fd3760e0 100644
--- a/Documentation/ABI/testing/sysfs-class-rc
+++ b/Documentation/ABI/testing/sysfs-class-rc
@@ -62,18 +62,18 @@ Description:
 		This value may be reset to 0 if the current protocol is altered.
 
 What:		/sys/class/rc/rcN/wakeup_protocols
-Date:		Feb 2014
-KernelVersion:	3.15
+Date:		Feb 2017
+KernelVersion:	4.11
 Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
 Description:
 		Reading this file returns a list of available protocols to use
 		for the wakeup filter, something like:
-		    "rc5 rc6 nec jvc [sony]"
+		    "rc-5 nec nec-x rc-6-0 rc-6-6a-24 [rc-6-6a-32] rc-6-mce"
+		Note that protocol variants are listed, so "nec", "sony",
+		"rc-5", "rc-6" have their different bit length encodings
+		listed if available.
 		The enabled wakeup protocol is shown in [] brackets.
-		Writing "+proto" will add a protocol to the list of enabled
-		wakeup protocols.
-		Writing "-proto" will remove a protocol from the list of enabled
-		wakeup protocols.
+		Only one protocol can be selected at a time.
 		Writing "proto" will use "proto" for wakeup events.
 		Writing "none" will disable wakeup.
 		Write fails with EINVAL if an invalid protocol combination or
diff --git a/Documentation/ABI/testing/sysfs-devices-edac b/Documentation/ABI/testing/sysfs-devices-edac
index 6568e0010e1a..46ff929fd52a 100644
--- a/Documentation/ABI/testing/sysfs-devices-edac
+++ b/Documentation/ABI/testing/sysfs-devices-edac
@@ -138,3 +138,20 @@ Contact:	Mauro Carvalho Chehab <m.chehab@samsung.com>
 Description:	This attribute file will display what type of memory is
 		currently on this csrow. Normally, either buffered or
 		unbuffered memory (for example, Unbuffered-DDR3).
+
+What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_ce_count
+Date:		October 2016
+Contact:	linux-edac@vger.kernel.org
+Description:	This attribute file displays the total count of correctable
+		errors that have occurred on this DIMM. This count is very important
+		to examine. CEs provide early indications that a DIMM is beginning
+		to fail. This count field should be monitored for non-zero values
+		and report such information to the system administrator.
+
+What:		/sys/devices/system/edac/mc/mc*/(dimm|rank)*/dimm_ue_count
+Date:		October 2016
+Contact:	linux-edac@vger.kernel.org
+Description:	This attribute file displays the total count of uncorrectable
+		errors that have occurred on this DIMM. If panic_on_ue is set, this
+		counter will not have a chance to increment, since EDAC will panic the
+		system
diff --git a/Documentation/ABI/testing/sysfs-kernel-iommu_groups b/Documentation/ABI/testing/sysfs-kernel-iommu_groups
index 9b31556cfdda..35c64e00b35c 100644
--- a/Documentation/ABI/testing/sysfs-kernel-iommu_groups
+++ b/Documentation/ABI/testing/sysfs-kernel-iommu_groups
@@ -12,3 +12,15 @@ Description:	/sys/kernel/iommu_groups/ contains a number of sub-
 		file if the IOMMU driver has chosen to register a more
 		common name for the group.
 Users:
+
+What:		/sys/kernel/iommu_groups/reserved_regions
+Date: 		January 2017
+KernelVersion:  v4.11
+Contact: 	Eric Auger <eric.auger@redhat.com>
+Description:    /sys/kernel/iommu_groups/reserved_regions list IOVA
+		regions that are reserved. Not necessarily all
+		reserved regions are listed. This is typically used to
+		output direct-mapped, MSI, non mappable regions. Each
+		region is described on a single line: the 1st field is
+		the base IOVA, the second is the end IOVA and the third
+		field describes the type of the region.
diff --git a/Documentation/ABI/testing/sysfs-platform-hidma b/Documentation/ABI/testing/sysfs-platform-hidma
index d36441538660..fca40a54df59 100644
--- a/Documentation/ABI/testing/sysfs-platform-hidma
+++ b/Documentation/ABI/testing/sysfs-platform-hidma
@@ -2,7 +2,7 @@ What:		/sys/devices/platform/hidma-*/chid
 		/sys/devices/platform/QCOM8061:*/chid
 Date:		Dec 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Contains the ID of the channel within the HIDMA instance.
 		It is used to associate a given HIDMA channel with the
diff --git a/Documentation/ABI/testing/sysfs-platform-hidma-mgmt b/Documentation/ABI/testing/sysfs-platform-hidma-mgmt
index c2fb5d033f0e..3b6c5c9eabdc 100644
--- a/Documentation/ABI/testing/sysfs-platform-hidma-mgmt
+++ b/Documentation/ABI/testing/sysfs-platform-hidma-mgmt
@@ -2,7 +2,7 @@ What:		/sys/devices/platform/hidma-mgmt*/chanops/chan*/priority
 		/sys/devices/platform/QCOM8060:*/chanops/chan*/priority
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Contains either 0 or 1 and indicates if the DMA channel is a
 		low priority (0) or high priority (1) channel.
@@ -11,7 +11,7 @@ What:		/sys/devices/platform/hidma-mgmt*/chanops/chan*/weight
 		/sys/devices/platform/QCOM8060:*/chanops/chan*/weight
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Contains 0..15 and indicates the weight of the channel among
 		equal priority channels during round robin scheduling.
@@ -20,7 +20,7 @@ What:		/sys/devices/platform/hidma-mgmt*/chreset_timeout_cycles
 		/sys/devices/platform/QCOM8060:*/chreset_timeout_cycles
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Contains the platform specific cycle value to wait after a
 		reset command is issued. If the value is chosen too short,
@@ -32,7 +32,7 @@ What:		/sys/devices/platform/hidma-mgmt*/dma_channels
 		/sys/devices/platform/QCOM8060:*/dma_channels
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Contains the number of dma channels supported by one instance
 		of HIDMA hardware. The value may change from chip to chip.
@@ -41,7 +41,7 @@ What:		/sys/devices/platform/hidma-mgmt*/hw_version_major
 		/sys/devices/platform/QCOM8060:*/hw_version_major
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Version number major for the hardware.
 
@@ -49,7 +49,7 @@ What:		/sys/devices/platform/hidma-mgmt*/hw_version_minor
 		/sys/devices/platform/QCOM8060:*/hw_version_minor
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Version number minor for the hardware.
 
@@ -57,7 +57,7 @@ What:		/sys/devices/platform/hidma-mgmt*/max_rd_xactions
 		/sys/devices/platform/QCOM8060:*/max_rd_xactions
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Contains a value between 0 and 31. Maximum number of
 		read transactions that can be issued back to back.
@@ -69,7 +69,7 @@ What:		/sys/devices/platform/hidma-mgmt*/max_read_request
 		/sys/devices/platform/QCOM8060:*/max_read_request
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Size of each read request. The value needs to be a power
 		of two and can be between 128 and 1024.
@@ -78,7 +78,7 @@ What:		/sys/devices/platform/hidma-mgmt*/max_wr_xactions
 		/sys/devices/platform/QCOM8060:*/max_wr_xactions
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Contains a value between 0 and 31. Maximum number of
 		write transactions that can be issued back to back.
@@ -91,7 +91,7 @@ What:		/sys/devices/platform/hidma-mgmt*/max_write_request
 		/sys/devices/platform/QCOM8060:*/max_write_request
 Date:		Nov 2015
 KernelVersion:	4.4
-Contact:	"Sinan Kaya <okaya@cudeaurora.org>"
+Contact:	"Sinan Kaya <okaya@codeaurora.org>"
 Description:
 		Size of each write request. The value needs to be a power
 		of two and can be between 128 and 1024.