Merge tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc

Pull char / misc driver updates from Greg KH:
 "Here is the "big" set of char/misc and other driver subsystem changes
  for 6.12-rc1.

  Lots of changes in here, primarily dominated by the usual IIO driver
  updates and additions, but there are also small driver subsystem
  updates all over the place. Included in here are:

   - lots and lots of new IIO drivers and updates to existing ones

   - interconnect subsystem updates and new drivers

   - nvmem subsystem updates and new drivers

   - mhi driver updates

   - power supply subsystem updates

   - kobj_type const work for many different small subsystems

   - comedi driver fix

   - coresight subsystem and driver updates

   - fpga subsystem improvements

   - slimbus fixups

   - binder new feature addition for "frozen" notifications

   - lots and lots of other small driver updates and cleanups

  All of these have been in linux-next for a long time with no reported
  problems"

* tag 'char-misc-6.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (354 commits)
  greybus: gb-beagleplay: Add firmware upload API
  arm64: dts: ti: k3-am625-beagleplay: Add bootloader-backdoor-gpios to cc1352p7
  dt-bindings: net: ti,cc1352p7: Add bootloader-backdoor-gpios
  MAINTAINERS: Update path for U-Boot environment variables YAML
  nvmem: layouts: add U-Boot env layout
  comedi: ni_routing: tools: Check when the file could not be opened
  ocxl: Remove the unused declarations in headr file
  hpet: Fix the wrong format specifier
  uio: Constify struct kobj_type
  cxl: Constify struct kobj_type
  binder: modify the comment for binder_proc_unlock
  iio: adc: axp20x_adc: add support for AXP717 ADC
  dt-bindings: iio: adc: Add AXP717 compatible
  iio: adc: axp20x_adc: Add adc_en1 and adc_en2 to axp_data
  w1: ds2482: Drop explicit initialization of struct i2c_device_id::driver_data to 0
  tools: iio: rm .*.cmd when make clean
  iio: adc: standardize on formatting for id match tables
  iio: proximity: aw96103: Add support for aw96103/aw96105 proximity sensor
  bus: mhi: host: pci_generic: Enable EDL trigger for Foxconn modems
  bus: mhi: host: pci_generic: Update EDL firmware path for Foxconn modems
  ...

10 files changed, 185 insertions, 86 deletions

diff --git a/Documentation/ABI/stable/sysfs-bus-nvmem b/Documentation/ABI/stable/sysfs-bus-nvmem
index aa89adf18bc5..0ae8cb074acf 100644
--- a/Documentation/ABI/stable/sysfs-bus-nvmem
+++ b/Documentation/ABI/stable/sysfs-bus-nvmem
@@ -11,7 +11,7 @@ Description:
 		Read returns '0' or '1' for read-write or read-only modes
 		respectively.
 		Write parses one of 'YyTt1NnFf0', or [oO][NnFf] for "on"
-		and "off", i.e. what kstrbool() supports.
+		and "off", i.e. what kstrtobool() supports.
 		Note: This file is only present if CONFIG_NVMEM_SYSFS
 		is enabled.
 
diff --git a/Documentation/ABI/testing/debugfs-iio-ad9467 b/Documentation/ABI/testing/debugfs-iio-ad9467
new file mode 100644
index 000000000000..0352fca1f7f2
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-iio-ad9467
@@ -0,0 +1,39 @@
+What:		/sys/kernel/debug/iio/iio:deviceX/calibration_table_dump
+KernelVersion:	6.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This dumps the calibration table that was filled during the
+		digital interface tuning process.
+
+What:		/sys/kernel/debug/iio/iio:deviceX/in_voltage_test_mode_available
+KernelVersion:	6.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		List all the available test tones:
+		- off
+		- midscale_short
+		- pos_fullscale
+		- neg_fullscale
+		- checkerboard
+		- prbs23
+		- prbs9
+		- one_zero_toggle
+		- user
+		- bit_toggle
+		- sync
+		- one_bit_high
+		- mixed_bit_frequency
+		- ramp
+
+		Note that depending on the actual device being used, some of the
+		above might not be available (and they won't be listed when
+		reading the file).
+
+What:		/sys/kernel/debug/iio/iio:deviceX/in_voltageY_test_mode
+KernelVersion:	6.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Writing to this file will initiate one of available test tone on
+		channel Y. Reading it, shows which test is running. In cases
+		where an IIO backend is available and supports the test tone,
+		additional information about the data correctness is given.
diff --git a/Documentation/ABI/testing/debugfs-iio-backend b/Documentation/ABI/testing/debugfs-iio-backend
new file mode 100644
index 000000000000..01ab94469432
--- /dev/null
+++ b/Documentation/ABI/testing/debugfs-iio-backend
@@ -0,0 +1,20 @@
+What:		/sys/kernel/debug/iio/iio:deviceX/backendY/name
+KernelVersion:	6.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Name of Backend Y connected to device X.
+
+What:		/sys/kernel/debug/iio/iio:deviceX/backendY/direct_reg_access
+KernelVersion:	6.11
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Directly access the registers of backend Y. Typical usage is:
+
+		Reading address 0x50
+		echo 0x50 > direct_reg_access
+		cat direct_reg_access
+
+		Writing address 0x50
+		echo 0x50 0x3 > direct_reg_access
+		//readback address 0x50
+		cat direct_reg_access
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index 7cee78ad4108..89943c2d54e8 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -523,13 +523,27 @@ Description:
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltageY_i_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltageY_q_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_capacitance_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias
-What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensityY_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_x_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_y_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_z_calibbias
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_resistance_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_calibbias
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_calibbias
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -541,6 +555,10 @@ Description:
 
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_calibbias_available
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_calibbias_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_calibbias_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity_calibbias_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_calibbias_available
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_calibbias_available
 KernelVersion:  5.8
 Contact:        linux-iio@vger.kernel.org
 Description:
@@ -549,25 +567,34 @@ Description:
 		- a small discrete set of values like "0 2 4 6 8"
 		- a range specified as "[min step max]"
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_accel_z_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_altvoltage_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_x_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_y_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_anglvel_z_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_capacitance_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance0_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_both_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensity_ir_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_x_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_y_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_magn_z_calibscale
 What:		/sys/bus/iio/devices/iio:deviceX/in_pressure_calibscale
-What:		/sys/bus/iio/devices/iio:deviceX/in_illuminance_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_pressureY_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximity0_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_supply_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_calibscale
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_calibscale
 KernelVersion:	2.6.35
 Contact:	linux-iio@vger.kernel.org
 Description:
@@ -575,6 +602,20 @@ Description:
 		production inaccuracies).  If shared across all channels,
 		<type>_calibscale is used.
 
+What:		/sys/bus/iio/devices/iio:deviceX/in_illuminanceY_calibscale_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_intensityY_calibscale_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_proximityY_calibscale_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltageY_calibscale_available
+KernelVersion:	4.8
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Available values of calibscale. Maybe expressed as either of:
+
+		- a small discrete set of values like "1 8 16"
+		- a range specified as "[min step max]"
+
+		If shared across all channels, <type>_calibscale_available is used.
+
 What:		/sys/bus/iio/devices/iio:deviceX/in_activity_calibgender
 What:		/sys/bus/iio/devices/iio:deviceX/in_energy_calibgender
 What:		/sys/bus/iio/devices/iio:deviceX/in_distance_calibgender
@@ -708,6 +749,7 @@ Description:
 		2.5kohm_to_gnd: connected to ground via a 2.5kOhm resistor,
 		6kohm_to_gnd: connected to ground via a 6kOhm resistor,
 		20kohm_to_gnd: connected to ground via a 20kOhm resistor,
+		42kohm_to_gnd: connected to ground via a 42kOhm resistor,
 		90kohm_to_gnd: connected to ground via a 90kOhm resistor,
 		100kohm_to_gnd: connected to ground via an 100kOhm resistor,
 		125kohm_to_gnd: connected to ground via an 125kOhm resistor,
@@ -2289,3 +2331,11 @@ KernelVersion:	6.7
 Contact:	linux-iio@vger.kernel.org
 Description:
 		List of available timeout value for tap gesture confirmation.
+
+What:		/sys/.../iio:deviceX/in_shunt_resistor
+What:		/sys/.../iio:deviceX/in_current_shunt_resistor
+What:		/sys/.../iio:deviceX/in_power_shunt_resistor
+KernelVersion:	6.10
+Contact:	linux-iio@vger.kernel.org
+Description:
+		The value of current sense resistor in Ohms.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611 b/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611
deleted file mode 100644
index 6d2d2b094941..000000000000
--- a/Documentation/ABI/testing/sysfs-bus-iio-adc-max9611
+++ /dev/null
@@ -1,17 +0,0 @@
-What:		/sys/bus/iio/devices/iio:deviceX/in_power_shunt_resistor
-Date:		March 2017
-KernelVersion:	4.12
-Contact:	linux-iio@vger.kernel.org
-Description: 	The value of the shunt resistor used to compute power drain on
-                common input voltage pin (RS+). In Ohms.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_current_shunt_resistor
-Date:		March 2017
-KernelVersion:	4.12
-Contact:	linux-iio@vger.kernel.org
-Description: 	The value of the shunt resistor used to compute current flowing
-                between RS+ and RS- voltage sense inputs. In Ohms.
-
-These attributes describe a single physical component, exposed as two distinct
-attributes as it is used to calculate two different values: power load and
-current flowing between RS+ and RS- inputs.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-chemical-sgp40 b/Documentation/ABI/testing/sysfs-bus-iio-chemical-sgp40
index 469a7c00fad4..a95547e874f1 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-chemical-sgp40
+++ b/Documentation/ABI/testing/sysfs-bus-iio-chemical-sgp40
@@ -15,17 +15,3 @@ Description:
 		Set the relative humidity. This value is sent to the sensor for
 		humidity compensation.
 		Default value: 50000 (50 % relative humidity)
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_resistance_calibbias
-Date:		August 2021
-KernelVersion:	5.15
-Contact:	Andreas Klinger <ak@it-klinger.de>
-Description:
-		Set the bias value for the resistance which is used for
-		calculation of in_concentration_input as follows:
-
-		x = (in_resistance_raw - in_resistance_calibbias) * 0.65
-
-		in_concentration_input = 500 / (1 + e^x)
-
-		Default value: 30000
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-dac b/Documentation/ABI/testing/sysfs-bus-iio-dac
new file mode 100644
index 000000000000..810eaac5533c
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-dac
@@ -0,0 +1,61 @@
+What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_toggle_en
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Toggle enable. Write 1 to enable toggle or 0 to disable it. This
+		is useful when one wants to change the DAC output codes. For
+		autonomous toggling, the way it should be done is:
+
+		- disable toggle operation;
+		- change out_currentY_rawN, where N is the integer value of the symbol;
+		- enable toggle operation.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_rawN
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute has the same meaning as out_currentY_raw. It is
+		specific to toggle enabled channels and refers to the DAC output
+		code in INPUT_N (_rawN), where N is the integer value of the symbol.
+		The same scale and offset as in out_currentY_raw applies.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_currentY_symbol
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Performs a SW switch to a predefined output symbol. This attribute
+		is specific to toggle enabled channels and allows switching between
+		multiple predefined symbols. Each symbol corresponds to a different
+		output, denoted as out_currentY_rawN, where N is the integer value
+		of the symbol. Writing an integer value N will select out_currentY_rawN.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_toggle_en
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Toggle enable. Write 1 to enable toggle or 0 to disable it. This
+		is useful when one wants to change the DAC output codes. For
+		autonomous toggling, the way it should be done is:
+
+		- disable toggle operation;
+		- change out_voltageY_rawN, where N is the integer value of the symbol;
+		- enable toggle operation.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_rawN
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		This attribute has the same meaning as out_currentY_raw. It is
+		specific to toggle enabled channels and refers to the DAC output
+		code in INPUT_N (_rawN), where N is the integer value of the symbol.
+		The same scale and offset as in out_currentY_raw applies.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_symbol
+KernelVersion:	5.18
+Contact:	linux-iio@vger.kernel.org
+Description:
+		Performs a SW switch to a predefined output symbol. This attribute
+		is specific to toggle enabled channels and allows switching between
+		multiple predefined symbols. Each symbol corresponds to a different
+		output, denoted as out_voltageY_rawN, where N is the integer value
+		of the symbol. Writing an integer value N will select out_voltageY_rawN.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688 b/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688
index 1c35971277ba..ae95a5477382 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688
+++ b/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688
@@ -53,34 +53,3 @@ KernelVersion:	5.18
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Returns the available values for the dither phase.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_toggle_en
-KernelVersion:	5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Toggle enable. Write 1 to enable toggle or 0 to disable it. This is
-		useful when one wants to change the DAC output codes. The way it should
-		be done is:
-
-		- disable toggle operation;
-		- change out_voltageY_raw0 and out_voltageY_raw1;
-		- enable toggle operation.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw0
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_raw1
-KernelVersion:	5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		It has the same meaning as out_voltageY_raw. This attribute is
-		specific to toggle enabled channels and refers to the DAC output
-		code in INPUT_A (_raw0) and INPUT_B (_raw1). The same scale and offset
-		as in out_voltageY_raw applies.
-
-What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_symbol
-KernelVersion:	5.18
-Contact:	linux-iio@vger.kernel.org
-Description:
-		Performs a SW toggle. This attribute is specific to toggle
-		enabled channels and allows to toggle between out_voltageY_raw0
-		and out_voltageY_raw1 through software. Writing 0 will select
-		out_voltageY_raw0 while 1 selects out_voltageY_raw1.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818 b/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
index 31dbb390573f..c431f0a13cf5 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
+++ b/Documentation/ABI/testing/sysfs-bus-iio-filter-admv8818
@@ -3,7 +3,7 @@ KernelVersion:
 Contact:	linux-iio@vger.kernel.org
 Description:
 		Reading this returns the valid values that can be written to the
-		on_altvoltage0_mode attribute:
+		filter_mode attribute:
 
 		- auto -> Adjust bandpass filter to track changes in input clock rate.
 		- manual -> disable/unregister the clock rate notifier / input clock tracking.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc b/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc
index 8916f7ec6507..8dbca113112d 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc
+++ b/Documentation/ABI/testing/sysfs-bus-iio-ina2xx-adc
@@ -13,12 +13,3 @@ Description:
 		available for reading data. However, samples can be occasionally skipped
 		or repeated, depending on the beat between the capture and conversion
 		rates.
-
-What:		/sys/bus/iio/devices/iio:deviceX/in_shunt_resistor
-Date:		December 2015
-KernelVersion:	4.4
-Contact:	linux-iio@vger.kernel.org
-Description:
-		The value of the shunt resistor may be known only at runtime fom an
-		eeprom content read by a client application. This attribute allows to
-		set its value in ohms.