Merge tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds

Pull LED updates from Lee Jones:
 "New Drivers:
   - Add support for Allwinner A100 RGB LED controller
   - Add support for Maxim 5970 Dual Hot-swap controller

  New Device Support:
   - Add support for AW20108 to Awinic LED driver

  New Functionality:
   - Extend support for Net speeds to include; 2.5G, 5G and 10G
   - Allow tx/rx and cts/dsr/dcd/rng TTY LEDS to be turned on and off
     via sysfs if required
   - Add support for hardware control in AW200xx

  Fix-ups:
   - Use safer methods for string handling
   - Improve error handling; return proper error values, simplify,
     avoid duplicates, etc
   - Replace Mutex use with the Completion mechanism
   - Fix include lists; alphabetise, remove unused, explicitly add used
   - Use generic platform device properties
   - Use/convert to new/better APIs/helpers/MACROs instead of
     hand-rolling implementations
   - Device Tree binding adaptions/conversions/creation
   - Continue work to remove superfluous platform .remove() call-backs
   - Remove superfluous/defunct code
   - Trivial; whitespace, unused variables, spelling, clean-ups, etc
   - Avoid unnecessary duplicate locks

  Bug Fixes:
   - Repair Kconfig based dependency lists
   - Ensure unused dynamically allocated data is freed after use
   - Fix support for brightness control
   - Add missing sufficient delays during reset to ensure correct
     operation
   - Avoid division-by-zero issues"

* tag 'leds-next-6.8' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds: (45 commits)
  leds: trigger: netdev: Add core support for hw not supporting fallback to LED sw control
  leds: trigger: panic: Don't register panic notifier if creating the trigger failed
  leds: sun50i-a100: Convert to be agnostic to property provider
  leds: max5970: Add missing headers
  leds: max5970: Make use of dev_err_probe()
  leds: max5970: Make use of device properties
  leds: max5970: Remove unused variable
  leds: rgb: Drop obsolete dependency on COMPILE_TEST
  leds: sun50i-a100: Avoid division-by-zero warning
  leds: trigger: Remove unused function led_trigger_rename_static()
  leds: qcom-lpg: Introduce a wrapper for getting driver data from a pwm chip
  leds: gpio: Add kernel log if devm_fwnode_gpiod_get() fails
  dt-bindings: leds: qcom,spmi-flash-led: Fix example node name
  dt-bindings: leds: aw200xx: Fix led pattern and add reg constraints
  dt-bindings: leds: awinic,aw200xx: Add AW20108 device
  leds: aw200xx: Add support for aw20108 device
  leds: aw200xx: Improve autodim calculation method
  leds: aw200xx: Enable disable_locking flag in regmap config
  leds: aw200xx: Add delay after software reset
  dt-bindings: leds: aw200xx: Remove property "awinic,display-rows"
  ...

2 files changed, 95 insertions, 0 deletions

diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
index f6d9d72ce77b..a6c307c4befa 100644
--- a/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
+++ b/Documentation/ABI/testing/sysfs-class-led-trigger-netdev
@@ -114,6 +114,45 @@ Description:
 		speed of 1000Mbps of the named network device.
 		Setting this value also immediately changes the LED state.
 
+What:		/sys/class/leds/<led>/link_2500
+Date:		Nov 2023
+KernelVersion:	6.8
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link speed state of 2500Mbps of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link state
+		speed of 2500Mbps of the named network device.
+		Setting this value also immediately changes the LED state.
+
+What:		/sys/class/leds/<led>/link_5000
+Date:		Nov 2023
+KernelVersion:	6.8
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link speed state of 5000Mbps of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link state
+		speed of 5000Mbps of the named network device.
+		Setting this value also immediately changes the LED state.
+
+What:		/sys/class/leds/<led>/link_10000
+Date:		Nov 2023
+KernelVersion:	6.8
+Contact:	linux-leds@vger.kernel.org
+Description:
+		Signal the link speed state of 10000Mbps of the named network device.
+
+		If set to 0 (default), the LED's normal state is off.
+
+		If set to 1, the LED's normal state reflects the link state
+		speed of 10000Mbps of the named network device.
+		Setting this value also immediately changes the LED state.
+
 What:		/sys/class/leds/<led>/half_duplex
 Date:		Jun 2023
 KernelVersion:	6.5
diff --git a/Documentation/ABI/testing/sysfs-class-led-trigger-tty b/Documentation/ABI/testing/sysfs-class-led-trigger-tty
index 2bf6b24e781b..30cef9ac0f49 100644
--- a/Documentation/ABI/testing/sysfs-class-led-trigger-tty
+++ b/Documentation/ABI/testing/sysfs-class-led-trigger-tty
@@ -4,3 +4,59 @@ KernelVersion:	5.10
 Contact:	linux-leds@vger.kernel.org
 Description:
 		Specifies the tty device name of the triggering tty
+
+What:		/sys/class/leds/<led>/rx
+Date:		February 2024
+KernelVersion:	6.8
+Description:
+		Signal reception (rx) of data on the named tty device.
+		If set to 0, the LED will not blink on reception.
+		If set to 1 (default), the LED will blink on reception.
+
+What:		/sys/class/leds/<led>/tx
+Date:		February 2024
+KernelVersion:	6.8
+Description:
+		Signal transmission (tx) of data on the named tty device.
+		If set to 0, the LED will not blink on transmission.
+		If set to 1 (default), the LED will blink on transmission.
+
+What:		/sys/class/leds/<led>/cts
+Date:		February 2024
+KernelVersion:	6.8
+Description:
+		CTS = Clear To Send
+		DCE is ready to accept data from the DTE.
+		If the line state is detected, the LED is switched on.
+		If set to 0 (default), the LED will not evaluate CTS.
+		If set to 1, the LED will evaluate CTS.
+
+What:		/sys/class/leds/<led>/dsr
+Date:		February 2024
+KernelVersion:	6.8
+Description:
+		DSR = Data Set Ready
+		DCE is ready to receive and send data.
+		If the line state is detected, the LED is switched on.
+		If set to 0 (default), the LED will not evaluate DSR.
+		If set to 1, the LED will evaluate DSR.
+
+What:		/sys/class/leds/<led>/dcd
+Date:		February 2024
+KernelVersion:	6.8
+Description:
+		DCD = Data Carrier Detect
+		DTE is receiving a carrier from the DCE.
+		If the line state is detected, the LED is switched on.
+		If set to 0 (default), the LED will not evaluate CAR (DCD).
+		If set to 1, the LED will evaluate CAR (DCD).
+
+What:		/sys/class/leds/<led>/rng
+Date:		February 2024
+KernelVersion:	6.8
+Description:
+		RNG = Ring Indicator
+		DCE has detected an incoming ring signal on the telephone
+		line. If the line state is detected, the LED is switched on.
+		If set to 0 (default), the LED will not evaluate RNG.
+		If set to 1, the LED will evaluate RNG.