summaryrefslogtreecommitdiffstats
path: root/Documentation/ABI
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@linux-foundation.org>2022-03-28 21:27:35 +0200
committerLinus Torvalds <torvalds@linux-foundation.org>2022-03-28 21:27:35 +0200
commit02e2af20f4f9f2aa0c84e9a30a35c02f0fbb7daa (patch)
treed126449a7d2ea2270627183f7cebd726fbe56a9d /Documentation/ABI
parentMerge tag 'pinctrl-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/... (diff)
parentfirmware: google: Properly state IOMEM dependency (diff)
downloadlinux-02e2af20f4f9f2aa0c84e9a30a35c02f0fbb7daa.tar.xz
linux-02e2af20f4f9f2aa0c84e9a30a35c02f0fbb7daa.zip
Merge tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull char/misc and other driver updates from Greg KH: "Here is the big set of char/misc and other small driver subsystem updates for 5.18-rc1. Included in here are merges from driver subsystems which contain: - iio driver updates and new drivers - fsi driver updates - fpga driver updates - habanalabs driver updates and support for new hardware - soundwire driver updates and new drivers - phy driver updates and new drivers - coresight driver updates - icc driver updates Individual changes include: - mei driver updates - interconnect driver updates - new PECI driver subsystem added - vmci driver updates - lots of tiny misc/char driver updates All of these have been in linux-next for a while with no reported problems" * tag 'char-misc-5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (556 commits) firmware: google: Properly state IOMEM dependency kgdbts: fix return value of __setup handler firmware: sysfb: fix platform-device leak in error path firmware: stratix10-svc: add missing callback parameter on RSU arm64: dts: qcom: add non-secure domain property to fastrpc nodes misc: fastrpc: Add dma handle implementation misc: fastrpc: Add fdlist implementation misc: fastrpc: Add helper function to get list and page misc: fastrpc: Add support to secure memory map dt-bindings: misc: add fastrpc domain vmid property misc: fastrpc: check before loading process to the DSP misc: fastrpc: add secure domain support dt-bindings: misc: add property to support non-secure DSP misc: fastrpc: Add support to get DSP capabilities misc: fastrpc: add support for FASTRPC_IOCTL_MEM_MAP/UNMAP misc: fastrpc: separate fastrpc device from channel context dt-bindings: nvmem: brcm,nvram: add basic NVMEM cells dt-bindings: nvmem: make "reg" property optional nvmem: brcm_nvram: parse NVRAM content into NVMEM cells nvmem: dt-bindings: Fix the error of dt-bindings check ...
Diffstat (limited to 'Documentation/ABI')
-rw-r--r--Documentation/ABI/stable/sysfs-driver-firmware-zynqmp141
-rw-r--r--Documentation/ABI/testing/debugfs-driver-habanalabs20
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio31
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-adc-ad7280a13
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-dac-ltc268886
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-frequency-admv101423
-rw-r--r--Documentation/ABI/testing/sysfs-bus-iio-sx932428
-rw-r--r--Documentation/ABI/testing/sysfs-bus-peci16
-rw-r--r--Documentation/ABI/testing/sysfs-driver-habanalabs16
9 files changed, 354 insertions, 20 deletions
diff --git a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
index f5724bb5b462..c3fec3c835af 100644
--- a/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
+++ b/Documentation/ABI/stable/sysfs-driver-firmware-zynqmp
@@ -113,3 +113,144 @@ Description:
# echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/health_status
Users: Xilinx
+
+What: /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+Date: Feb 2022
+KernelVersion: 5.18
+Contact: "Ronak Jain" <ronak.jain@xilinx.com>
+Description:
+ This sysfs interface allows user to configure features at
+ runtime. The user can enable or disable features running at
+ firmware as well as the user can configure the parameters of
+ the features at runtime. The supported features are over
+ temperature and external watchdog. Here, the external watchdog
+ is completely different than the /dev/watchdog as the external
+ watchdog is running on the firmware and it is used to monitor
+ the health of firmware not APU(Linux). Also, the external
+ watchdog is interfaced outside of the zynqmp soc.
+
+ The supported config ids are for the feature configuration is,
+ 1. PM_FEATURE_OVERTEMP_STATUS = 1, the user can enable or
+ disable the over temperature feature.
+ 2. PM_FEATURE_OVERTEMP_VALUE = 2, the user can configure the
+ over temperature limit in Degree Celsius.
+ 3. PM_FEATURE_EXTWDT_STATUS = 3, the user can enable or disable
+ the external watchdog feature.
+ 4. PM_FEATURE_EXTWDT_VALUE = 4, the user can configure the
+ external watchdog feature.
+
+ Usage:
+
+ Select over temperature config ID to enable/disable feature
+ # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+
+ Check over temperature config ID is selected or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ The expected result is 1.
+
+ Select over temperature config ID to configure OT limit
+ # echo 2 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+
+ Check over temperature config ID is selected or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ The expected result is 2.
+
+ Select external watchdog config ID to enable/disable feature
+ # echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+
+ Check external watchdog config ID is selected or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ The expected result is 3.
+
+ Select external watchdog config ID to configure time interval
+ # echo 4 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+
+ Check external watchdog config ID is selected or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ The expected result is 4.
+
+Users: Xilinx
+
+What: /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+Date: Feb 2022
+KernelVersion: 5.18
+Contact: "Ronak Jain" <ronak.jain@xilinx.com>
+Description:
+ This sysfs interface allows to configure features at runtime.
+ The user can enable or disable features running at firmware.
+ Also, the user can configure the parameters of the features
+ at runtime. The supported features are over temperature and
+ external watchdog. Here, the external watchdog is completely
+ different than the /dev/watchdog as the external watchdog is
+ running on the firmware and it is used to monitor the health
+ of firmware not APU(Linux). Also, the external watchdog is
+ interfaced outside of the zynqmp soc.
+
+ By default the features are disabled in the firmware. The user
+ can enable features by querying appropriate config id of the
+ features.
+
+ The default limit for the over temperature is 90 Degree Celsius.
+ The default timer interval for the external watchdog is 570ms.
+
+ The supported config ids are for the feature configuration is,
+ 1. PM_FEATURE_OVERTEMP_STATUS = 1, the user can enable or
+ disable the over temperature feature.
+ 2. PM_FEATURE_OVERTEMP_VALUE = 2, the user can configure the
+ over temperature limit in Degree Celsius.
+ 3. PM_FEATURE_EXTWDT_STATUS = 3, the user can enable or disable
+ the external watchdog feature.
+ 4. PM_FEATURE_EXTWDT_VALUE = 4, the user can configure the
+ external watchdog feature.
+
+ Usage:
+
+ Enable over temperature feature
+ # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the over temperature feature is enabled or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 1.
+
+ Disable over temperature feature
+ # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the over temperature feature is disabled or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 0.
+
+ Configure over temperature limit to 50 Degree Celsius
+ # echo 2 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 50 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the over temperature limit is configured or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 50.
+
+ Enable external watchdog feature
+ # echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 1 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the external watchdog feature is enabled or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 1.
+
+ Disable external watchdog feature
+ # echo 3 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 0 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the external watchdog feature is disabled or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 0.
+
+ Configure external watchdog timer interval to 500ms
+ # echo 4 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_id
+ # echo 500 > /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+
+ Check whether the external watchdog timer interval is configured or not
+ # cat /sys/devices/platform/firmware\:zynqmp-firmware/feature_config_value
+ The expected result is 500.
+
+Users: Xilinx
diff --git a/Documentation/ABI/testing/debugfs-driver-habanalabs b/Documentation/ABI/testing/debugfs-driver-habanalabs
index 2667cbf940f3..bcf6915987e4 100644
--- a/Documentation/ABI/testing/debugfs-driver-habanalabs
+++ b/Documentation/ABI/testing/debugfs-driver-habanalabs
@@ -12,24 +12,7 @@ What: /sys/kernel/debug/habanalabs/hl<n>/clk_gate
Date: May 2020
KernelVersion: 5.8
Contact: ogabbay@kernel.org
-Description: Allow the root user to disable/enable in runtime the clock
- gating mechanism in Gaudi. Due to how Gaudi is built, the
- clock gating needs to be disabled in order to access the
- registers of the TPC and MME engines. This is sometimes needed
- during debug by the user and hence the user needs this option.
- The user can supply a bitmask value, each bit represents
- a different engine to disable/enable its clock gating feature.
- The bitmask is composed of 20 bits:
-
- ======= ============
- 0 - 7 DMA channels
- 8 - 11 MME engines
- 12 - 19 TPC engines
- ======= ============
-
- The bit's location of a specific engine can be determined
- using (1 << GAUDI_ENGINE_ID_*). GAUDI_ENGINE_ID_* values
- are defined in uapi habanalabs.h file in enum gaudi_engine_id
+Description: This setting is now deprecated as clock gating is handled solely by the f/w
What: /sys/kernel/debug/habanalabs/hl<n>/command_buffers
Date: Jan 2019
@@ -239,6 +222,7 @@ KernelVersion: 5.6
Contact: ogabbay@kernel.org
Description: Sets the stop-on_error option for the device engines. Value of
"0" is for disable, otherwise enable.
+ Relevant only for GOYA and GAUDI.
What: /sys/kernel/debug/habanalabs/hl<n>/timeout_locked
Date: Sep 2021
diff --git a/Documentation/ABI/testing/sysfs-bus-iio b/Documentation/ABI/testing/sysfs-bus-iio
index c551301b33f1..d4ccc68fdcf0 100644
--- a/Documentation/ABI/testing/sysfs-bus-iio
+++ b/Documentation/ABI/testing/sysfs-bus-iio
@@ -476,6 +476,7 @@ What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_i_calibscale
What: /sys/bus/iio/devices/iio:deviceX/in_voltageY_q_calibscale
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_i_calibscale
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_q_calibscale
+What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage_calibscale
What: /sys/bus/iio/devices/iio:deviceX/in_voltage_calibscale
What: /sys/bus/iio/devices/iio:deviceX/in_accel_x_calibscale
What: /sys/bus/iio/devices/iio:deviceX/in_accel_y_calibscale
@@ -1213,6 +1214,32 @@ Description:
number or direction is not specified, applies to all channels of
this type.
+What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_en
+What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_rising_en
+What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_falling_en
+What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_en
+What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_rising_en
+What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_falling_en
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Similar to in_accel_mag[_y][_rising|_falling]_en, but the event
+ value is relative to a reference magnitude. The reference magnitude
+ includes the graviational acceleration.
+
+What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_value
+What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_rising_value
+What: /sys/.../iio:deviceX/events/in_accel_mag_referenced_falling_value
+What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_value
+What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_rising_value
+What: /sys/.../iio:deviceX/events/in_accel_y_mag_referenced_falling_value
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ The value to which the reference magnitude of the channel is
+ compared. If the axis is not specified, it applies to all channels
+ of this type.
+
What: /sys/.../events/in_steps_change_en
KernelVersion: 4.0
Contact: linux-iio@vger.kernel.org
@@ -1252,6 +1279,10 @@ Description:
Actually start the buffer capture up. Will start trigger
if first device and appropriate.
+ Note that it might be impossible to configure other attributes,
+ (e.g.: events, scale, sampling rate) if they impact the currently
+ active buffer capture session.
+
What: /sys/bus/iio/devices/iio:deviceX/bufferY
KernelVersion: 5.11
Contact: linux-iio@vger.kernel.org
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7280a b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7280a
new file mode 100644
index 000000000000..83b7efe6aa07
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-adc-ad7280a
@@ -0,0 +1,13 @@
+What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_balance_switch_en
+KernelVersion: 5.14
+Contact: linux-iio@vger.kernel.org
+Description:
+ Used to enable an output for balancing cells for time
+ controlled via in_voltage_Y-voltageZ_balance_switch_timer.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_voltageY-voltageZ_balance_switch_timer
+KernelVersion: 5.14
+Contact: linux-iio@vger.kernel.org
+Description:
+ Time in seconds for which balance switch will be turned on.
+ Multiple of 71.5 seconds.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688 b/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688
new file mode 100644
index 000000000000..1c35971277ba
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-dac-ltc2688
@@ -0,0 +1,86 @@
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_en
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Dither enable. Write 1 to enable dither or 0 to disable it. This is useful
+ for changing the dither parameters. They way it should be done is:
+
+ - disable dither operation;
+ - change dither parameters (eg: frequency, phase...);
+ - enabled dither operation
+
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_raw
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ This raw, unscaled value refers to the dither signal amplitude.
+ The same scale as in out_voltageY_raw applies. However, the
+ offset might be different as it's always 0 for this attribute.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_raw_available
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Available range for dither raw amplitude values.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_offset
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Offset applied to out_voltageY_dither_raw. Read only attribute
+ always set to 0.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_frequency
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Sets the dither signal frequency. Units are in Hz.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_frequency_available
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Returns the available values for the dither frequency.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_phase
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Sets the dither signal phase. Units are in Radians.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_dither_phase_available
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Returns the available values for the dither phase.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_toggle_en
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Toggle enable. Write 1 to enable toggle or 0 to disable it. This is
+ useful when one wants to change the DAC output codes. The way it should
+ be done is:
+
+ - disable toggle operation;
+ - change out_voltageY_raw0 and out_voltageY_raw1;
+ - enable toggle operation.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw0
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_raw1
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ It has the same meaning as out_voltageY_raw. This attribute is
+ specific to toggle enabled channels and refers to the DAC output
+ code in INPUT_A (_raw0) and INPUT_B (_raw1). The same scale and offset
+ as in out_voltageY_raw applies.
+
+What: /sys/bus/iio/devices/iio:deviceX/out_voltageY_symbol
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Performs a SW toggle. This attribute is specific to toggle
+ enabled channels and allows to toggle between out_voltageY_raw0
+ and out_voltageY_raw1 through software. Writing 0 will select
+ out_voltageY_raw0 while 1 selects out_voltageY_raw1.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1014 b/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1014
new file mode 100644
index 000000000000..395010a0ef8b
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-frequency-admv1014
@@ -0,0 +1,23 @@
+What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage0_i_calibscale_coarse
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Read/write value for the digital attenuator gain (IF_I) with coarse steps.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage0_q_calibscale_coarse
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Read/write value for the digital attenuator gain (IF_Q) with coarse steps.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage0_i_calibscale_fine
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Read/write value for the digital attenuator gain (IF_I) with fine steps.
+
+What: /sys/bus/iio/devices/iio:deviceX/in_altvoltage0_q_calibscale_fine
+KernelVersion: 5.18
+Contact: linux-iio@vger.kernel.org
+Description:
+ Read/write value for the digital attenuator gain (IF_Q) with fine steps.
diff --git a/Documentation/ABI/testing/sysfs-bus-iio-sx9324 b/Documentation/ABI/testing/sysfs-bus-iio-sx9324
new file mode 100644
index 000000000000..632e3321f5a3
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-iio-sx9324
@@ -0,0 +1,28 @@
+What: /sys/bus/iio/devices/iio:deviceX/in_proximity<id>_setup
+Date: November 2021
+KernelVersion: 5.17
+Contact: Gwendal Grignou <gwendal@chromium.org>
+Description:
+ SX9324 has 3 inputs, CS0, CS1 and CS2. Hardware layout
+ defines if the input is
+ + not connected (HZ),
+ + grounded (GD),
+ + connected to an antenna where it can act as a base
+ (DS - data shield), or measured input (MI).
+
+ The sensor rotates measurement across 4 phases
+ (PH0, PH1, PH2, PH3), where the inputs are configured
+ and then measured.
+
+ By default, during the first phase, [PH0], CS0 is measured,
+ while CS1 and CS2 are used as shields.
+ `cat in_proximity0_setup` returns "MI,DS,DS".
+ [PH1], CS1 is measured, CS0 and CS2 are shield:
+ `cat in_proximity1_setup` returns "DS,MI,DS".
+ [PH2], CS2 is measured, CS0 and CS1 are shield:
+ `cat in_proximity1_setup` returns "DS,DS,MI".
+ [PH3], CS1 and CS2 are measured (combo mode):
+ `cat in_proximity1_setup` returns "DS,MI,MI".
+
+ Note, these are the chip default. Hardware layout will most
+ likely dictate different output. The entry is read-only.
diff --git a/Documentation/ABI/testing/sysfs-bus-peci b/Documentation/ABI/testing/sysfs-bus-peci
new file mode 100644
index 000000000000..87454ec5d981
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-peci
@@ -0,0 +1,16 @@
+What: /sys/bus/peci/rescan
+Date: July 2021
+KernelVersion: 5.18
+Contact: Iwona Winiarska <iwona.winiarska@intel.com>
+Description:
+ Writing a non-zero value to this attribute will
+ initiate scan for PECI devices on all PECI controllers
+ in the system.
+
+What: /sys/bus/peci/devices/<controller_id>-<device_addr>/remove
+Date: July 2021
+KernelVersion: 5.18
+Contact: Iwona Winiarska <iwona.winiarska@intel.com>
+Description:
+ Writing a non-zero value to this attribute will
+ remove the PECI device and any of its children.
diff --git a/Documentation/ABI/testing/sysfs-driver-habanalabs b/Documentation/ABI/testing/sysfs-driver-habanalabs
index 1f127f71d2b4..96646fb2e7a1 100644
--- a/Documentation/ABI/testing/sysfs-driver-habanalabs
+++ b/Documentation/ABI/testing/sysfs-driver-habanalabs
@@ -69,6 +69,12 @@ KernelVersion: 5.1
Contact: ogabbay@kernel.org
Description: Displays the device's version from the eFuse
+What: /sys/class/habanalabs/hl<n>/fw_os_ver
+Date: Dec 2021
+KernelVersion: 5.18
+Contact: ogabbay@kernel.org
+Description: Version of the firmware OS running on the device's CPU
+
What: /sys/class/habanalabs/hl<n>/hard_reset
Date: Jan 2019
KernelVersion: 5.1
@@ -115,7 +121,7 @@ What: /sys/class/habanalabs/hl<n>/infineon_ver
Date: Jan 2019
KernelVersion: 5.1
Contact: ogabbay@kernel.org
-Description: Version of the Device's power supply F/W code
+Description: Version of the Device's power supply F/W code. Relevant only to GOYA and GAUDI
What: /sys/class/habanalabs/hl<n>/max_power
Date: Jan 2019
@@ -220,4 +226,10 @@ What: /sys/class/habanalabs/hl<n>/uboot_ver
Date: Jan 2019
KernelVersion: 5.1
Contact: ogabbay@kernel.org
-Description: Version of the u-boot running on the device's CPU \ No newline at end of file
+Description: Version of the u-boot running on the device's CPU
+
+What: /sys/class/habanalabs/hl<n>/vrm_ver
+Date: Jan 2022
+KernelVersion: not yet upstreamed
+Contact: ogabbay@kernel.org
+Description: Version of the Device's Voltage Regulator Monitor F/W code. N/A to GOYA and GAUDI