Merge tag 'media/v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

 - DVB core changes to avoid refcount troubles and UAF

 - DVB API/core has gained support for DVB-C2 and DVB-S2X

 - New sensor drivers: ov08x40, ov4689.c, st-vgxy61 and tc358746.c

 - Removal of an unused sensor driver: s5k4ecgx

 - Move microchip_csi2dc to a new directory, named after the
   manufacturer

 - Add media controller support to Microship drivers

 - Old Atmel/Microship drivers that don't use media controler got moved
   to staging

 - New drivers added for Renesas RZ/G2L CRU and MIPI CSI-2 support

 - Allwinner A31 camera sensor driver code was now split into a bridge
   and a separate processor driver

 - Added a virtual stateless decoder driver in order to test core
   support for stateless drivers and test userspace apps using it

 - removed platform-based support for ov9650, as this is not used
   anymore

 - atomisp now uses videobuf2 and supports normal mmap mode

 - the imx7-media-csi driver got promoted from staging

 - rcar-vin driver has gained support for gen3 UDS (Up Down Scaler)

 - most i2c drivers now use I2C .probe_new() kAPI

 - lots of drivers fixes, cleanups and improvements

* tag 'media/v6.2-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (544 commits)
  media: s5c73m3: Switch to GPIO descriptors
  media: i2c: s5k5baf: switch to using gpiod API
  media: i2c: s5k6a3: switch to using gpiod API
  media: imx: remove code for non-existing config IMX_GPT_ICAP
  media: si470x: Fix use-after-free in si470x_int_in_callback()
  media: staging: stkwebcam: Restore MEDIA_{USB,CAMERA}_SUPPORT dependencies
  media: coda: Add check for kmalloc
  media: coda: Add check for dcoda_iram_alloc
  dt-bindings: media: s5c73m3: Fix reset-gpio descriptor
  media: dt-bindings: allwinner: h6-vpu-g2: Add IOMMU reference property
  media: s5k4ecgx: Delete driver
  media: s5k4ecgx: Switch to GPIO descriptors
  media: Switch to use dev_err_probe() helper
  headers: Remove some left-over license text in include/uapi/linux/v4l2-*
  headers: Remove some left-over license text in include/uapi/linux/dvb/
  media: usb: pwc-uncompress: Use flex array destination for memcpy()
  media: s5p-mfc: Fix to handle reference queue during finishing
  media: s5p-mfc: Clear workbit to handle error condition
  media: s5p-mfc: Fix in register read and write for H264
  media: imx: Use get_mbus_config instead of parsing upstream DT endpoints
  ...

1 files changed, 175 insertions, 0 deletions

diff --git a/Documentation/admin-guide/media/visl.rst b/Documentation/admin-guide/media/visl.rst
new file mode 100644
index 000000000000..7d2dc78341c9
--- /dev/null
+++ b/Documentation/admin-guide/media/visl.rst
@@ -0,0 +1,175 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+The Virtual Stateless Decoder Driver (visl)
+===========================================
+
+A virtual stateless decoder device for stateless uAPI development
+purposes.
+
+This tool's objective is to help the development and testing of
+userspace applications that use the V4L2 stateless API to decode media.
+
+A userspace implementation can use visl to run a decoding loop even when
+no hardware is available or when the kernel uAPI for the codec has not
+been upstreamed yet. This can reveal bugs at an early stage.
+
+This driver can also trace the contents of the V4L2 controls submitted
+to it.  It can also dump the contents of the vb2 buffers through a
+debugfs interface. This is in many ways similar to the tracing
+infrastructure available for other popular encode/decode APIs out there
+and can help develop a userspace application by using another (working)
+one as a reference.
+
+.. note::
+
+        No actual decoding of video frames is performed by visl. The
+        V4L2 test pattern generator is used to write various debug information
+        to the capture buffers instead.
+
+Module parameters
+-----------------
+
+- visl_debug: Activates debug info, printing various debug messages through
+  dprintk. Also controls whether per-frame debug info is shown. Defaults to off.
+  Note that enabling this feature can result in slow performance through serial.
+
+- visl_transtime_ms: Simulated process time in milliseconds. Slowing down the
+  decoding speed can be useful for debugging.
+
+- visl_dprintk_frame_start, visl_dprintk_frame_nframes: Dictates a range of
+  frames where dprintk is activated. This only controls the dprintk tracing on a
+  per-frame basis. Note that printing a lot of data can be slow through serial.
+
+- keep_bitstream_buffers: Controls whether bitstream (i.e. OUTPUT) buffers are
+  kept after a decoding session. Defaults to false so as to reduce the amount of
+  clutter. keep_bitstream_buffers == false works well when live debugging the
+  client program with GDB.
+
+- bitstream_trace_frame_start, bitstream_trace_nframes: Similar to
+  visl_dprintk_frame_start, visl_dprintk_nframes, but controls the dumping of
+  buffer data through debugfs instead.
+
+What is the default use case for this driver?
+---------------------------------------------
+
+This driver can be used as a way to compare different userspace implementations.
+This assumes that a working client is run against visl and that the ftrace and
+OUTPUT buffer data is subsequently used to debug a work-in-progress
+implementation.
+
+Information on reference frames, their timestamps, the status of the OUTPUT and
+CAPTURE queues and more can be read directly from the CAPTURE buffers.
+
+Supported codecs
+----------------
+
+The following codecs are supported:
+
+- FWHT
+- MPEG2
+- VP8
+- VP9
+- H.264
+- HEVC
+
+visl trace events
+-----------------
+The trace events are defined on a per-codec basis, e.g.:
+
+.. code-block:: bash
+
+        $ ls /sys/kernel/debug/tracing/events/ | grep visl
+        visl_fwht_controls
+        visl_h264_controls
+        visl_hevc_controls
+        visl_mpeg2_controls
+        visl_vp8_controls
+        visl_vp9_controls
+
+For example, in order to dump HEVC SPS data:
+
+.. code-block:: bash
+
+        $ echo 1 >  /sys/kernel/debug/tracing/events/visl_hevc_controls/v4l2_ctrl_hevc_sps/enable
+
+The SPS data will be dumped to the trace buffer, i.e.:
+
+.. code-block:: bash
+
+        $ cat /sys/kernel/debug/tracing/trace
+        video_parameter_set_id 0
+        seq_parameter_set_id 0
+        pic_width_in_luma_samples 1920
+        pic_height_in_luma_samples 1080
+        bit_depth_luma_minus8 0
+        bit_depth_chroma_minus8 0
+        log2_max_pic_order_cnt_lsb_minus4 4
+        sps_max_dec_pic_buffering_minus1 6
+        sps_max_num_reorder_pics 2
+        sps_max_latency_increase_plus1 0
+        log2_min_luma_coding_block_size_minus3 0
+        log2_diff_max_min_luma_coding_block_size 3
+        log2_min_luma_transform_block_size_minus2 0
+        log2_diff_max_min_luma_transform_block_size 3
+        max_transform_hierarchy_depth_inter 2
+        max_transform_hierarchy_depth_intra 2
+        pcm_sample_bit_depth_luma_minus1 0
+        pcm_sample_bit_depth_chroma_minus1 0
+        log2_min_pcm_luma_coding_block_size_minus3 0
+        log2_diff_max_min_pcm_luma_coding_block_size 0
+        num_short_term_ref_pic_sets 0
+        num_long_term_ref_pics_sps 0
+        chroma_format_idc 1
+        sps_max_sub_layers_minus1 0
+        flags AMP_ENABLED|SAMPLE_ADAPTIVE_OFFSET|TEMPORAL_MVP_ENABLED|STRONG_INTRA_SMOOTHING_ENABLED
+
+
+Dumping OUTPUT buffer data through debugfs
+------------------------------------------
+
+If the **VISL_DEBUGFS** Kconfig is enabled, visl will populate
+**/sys/kernel/debug/visl/bitstream** with OUTPUT buffer data according to the
+values of bitstream_trace_frame_start and bitstream_trace_nframes. This can
+highlight errors as broken clients may fail to fill the buffers properly.
+
+A single file is created for each processed OUTPUT buffer. Its name contains an
+integer that denotes the buffer sequence, i.e.:
+
+.. code-block:: c
+
+	snprintf(name, 32, "bitstream%d", run->src->sequence);
+
+Dumping the values is simply a matter of reading from the file, i.e.:
+
+For the buffer with sequence == 0:
+
+.. code-block:: bash
+
+        $ xxd /sys/kernel/debug/visl/bitstream/bitstream0
+        00000000: 2601 af04 d088 bc25 a173 0e41 a4f2 3274  &......%.s.A..2t
+        00000010: c668 cb28 e775 b4ac f53a ba60 f8fd 3aa1  .h.(.u...:.`..:.
+        00000020: 46b4 bcfc 506c e227 2372 e5f5 d7ea 579f  F...Pl.'#r....W.
+        00000030: 6371 5eb5 0eb8 23b5 ca6a 5de5 983a 19e4  cq^...#..j]..:..
+        00000040: e8c3 4320 b4ba a226 cbc1 4138 3a12 32d6  ..C ...&..A8:.2.
+        00000050: fef3 247b 3523 4e90 9682 ac8e eb0c a389  ..${5#N.........
+        00000060: ddd0 6cfc 0187 0e20 7aae b15b 1812 3d33  ..l.... z..[..=3
+        00000070: e1c5 f425 a83a 00b7 4f18 8127 3c4c aefb  ...%.:..O..'<L..
+
+For the buffer with sequence == 1:
+
+.. code-block:: bash
+
+        $ xxd /sys/kernel/debug/visl/bitstream/bitstream1
+        00000000: 0201 d021 49e1 0c40 aa11 1449 14a6 01dc  ...!I..@...I....
+        00000010: 7023 889a c8cd 2cd0 13b4 dab0 e8ca 21fe  p#....,.......!.
+        00000020: c4c8 ab4c 486e 4e2f b0df 96cc c74e 8dde  ...LHnN/.....N..
+        00000030: 8ce7 ee36 d880 4095 4d64 30a0 ff4f 0c5e  ...6..@.Md0..O.^
+        00000040: f16b a6a1 d806 ca2a 0ece a673 7bea 1f37  .k.....*...s{..7
+        00000050: 370f 5bb9 1dc4 ba21 6434 bc53 0173 cba0  7.[....!d4.S.s..
+        00000060: dfe6 bc99 01ea b6e0 346b 92b5 c8de 9f5d  ........4k.....]
+        00000070: e7cc 3484 1769 fef2 a693 a945 2c8b 31da  ..4..i.....E,.1.
+
+And so on.
+
+By default, the files are removed during STREAMOFF. This is to reduce the amount
+of clutter.