diff options
author | GeunSik Lim <leemgs1@gmail.com> | 2010-02-24 11:06:39 +0100 |
---|---|---|
committer | Jiri Kosina <jkosina@suse.cz> | 2010-02-24 11:06:39 +0100 |
commit | e21a05cb408bb9f244f11a0813d4b355dad0822e (patch) | |
tree | 608916da35737525ef5a11c1699eca592d6aaab6 /Documentation/cgroups/cpusets.txt | |
parent | Fix of spelling in arch/sparc/kernel/leon_kernel.c no longer needed (diff) | |
download | linux-e21a05cb408bb9f244f11a0813d4b355dad0822e.tar.xz linux-e21a05cb408bb9f244f11a0813d4b355dad0822e.zip |
doc: cpuset: Update the cpuset flag file
This patch is for modifying with correct cuset flag file. We need to update
current manual for cpuset. For example, before) cpus, cpu_exclusive, mems
after ) cpuset.cpus, cpuset.cpu_exclusive, cpuset.mems
Signed-off-by: Geunsik Lim <geunsik.lim@samsung.com>
Acked-by: Paul Menage <menage@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Diffstat (limited to 'Documentation/cgroups/cpusets.txt')
-rw-r--r-- | Documentation/cgroups/cpusets.txt | 127 |
1 files changed, 65 insertions, 62 deletions
diff --git a/Documentation/cgroups/cpusets.txt b/Documentation/cgroups/cpusets.txt index 1d7e9784439a..4160df82b3f5 100644 --- a/Documentation/cgroups/cpusets.txt +++ b/Documentation/cgroups/cpusets.txt @@ -168,20 +168,20 @@ Each cpuset is represented by a directory in the cgroup file system containing (on top of the standard cgroup files) the following files describing that cpuset: - - cpus: list of CPUs in that cpuset - - mems: list of Memory Nodes in that cpuset - - memory_migrate flag: if set, move pages to cpusets nodes - - cpu_exclusive flag: is cpu placement exclusive? - - mem_exclusive flag: is memory placement exclusive? - - mem_hardwall flag: is memory allocation hardwalled - - memory_pressure: measure of how much paging pressure in cpuset - - memory_spread_page flag: if set, spread page cache evenly on allowed nodes - - memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes - - sched_load_balance flag: if set, load balance within CPUs on that cpuset - - sched_relax_domain_level: the searching range when migrating tasks + - cpuset.cpus: list of CPUs in that cpuset + - cpuset.mems: list of Memory Nodes in that cpuset + - cpuset.memory_migrate flag: if set, move pages to cpusets nodes + - cpuset.cpu_exclusive flag: is cpu placement exclusive? + - cpuset.mem_exclusive flag: is memory placement exclusive? + - cpuset.mem_hardwall flag: is memory allocation hardwalled + - cpuset.memory_pressure: measure of how much paging pressure in cpuset + - cpuset.memory_spread_page flag: if set, spread page cache evenly on allowed nodes + - cpuset.memory_spread_slab flag: if set, spread slab cache evenly on allowed nodes + - cpuset.sched_load_balance flag: if set, load balance within CPUs on that cpuset + - cpuset.sched_relax_domain_level: the searching range when migrating tasks In addition, the root cpuset only has the following file: - - memory_pressure_enabled flag: compute memory_pressure? + - cpuset.memory_pressure_enabled flag: compute memory_pressure? New cpusets are created using the mkdir system call or shell command. The properties of a cpuset, such as its flags, allowed @@ -229,7 +229,7 @@ If a cpuset is cpu or mem exclusive, no other cpuset, other than a direct ancestor or descendant, may share any of the same CPUs or Memory Nodes. -A cpuset that is mem_exclusive *or* mem_hardwall is "hardwalled", +A cpuset that is cpuset.mem_exclusive *or* cpuset.mem_hardwall is "hardwalled", i.e. it restricts kernel allocations for page, buffer and other data commonly shared by the kernel across multiple users. All cpusets, whether hardwalled or not, restrict allocations of memory for user @@ -304,15 +304,15 @@ times 1000. --------------------------- There are two boolean flag files per cpuset that control where the kernel allocates pages for the file system buffers and related in -kernel data structures. They are called 'memory_spread_page' and -'memory_spread_slab'. +kernel data structures. They are called 'cpuset.memory_spread_page' and +'cpuset.memory_spread_slab'. -If the per-cpuset boolean flag file 'memory_spread_page' is set, then +If the per-cpuset boolean flag file 'cpuset.memory_spread_page' is set, then the kernel will spread the file system buffers (page cache) evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those pages on the node where the task is running. -If the per-cpuset boolean flag file 'memory_spread_slab' is set, +If the per-cpuset boolean flag file 'cpuset.memory_spread_slab' is set, then the kernel will spread some file system related slab caches, such as for inodes and dentries evenly over all the nodes that the faulting task is allowed to use, instead of preferring to put those @@ -337,21 +337,21 @@ their containing tasks memory spread settings. If memory spreading is turned off, then the currently specified NUMA mempolicy once again applies to memory page allocations. -Both 'memory_spread_page' and 'memory_spread_slab' are boolean flag +Both 'cpuset.memory_spread_page' and 'cpuset.memory_spread_slab' are boolean flag files. By default they contain "0", meaning that the feature is off for that cpuset. If a "1" is written to that file, then that turns the named feature on. The implementation is simple. -Setting the flag 'memory_spread_page' turns on a per-process flag +Setting the flag 'cpuset.memory_spread_page' turns on a per-process flag PF_SPREAD_PAGE for each task that is in that cpuset or subsequently joins that cpuset. The page allocation calls for the page cache is modified to perform an inline check for this PF_SPREAD_PAGE task flag, and if set, a call to a new routine cpuset_mem_spread_node() returns the node to prefer for the allocation. -Similarly, setting 'memory_spread_slab' turns on the flag +Similarly, setting 'cpuset.memory_spread_slab' turns on the flag PF_SPREAD_SLAB, and appropriately marked slab caches will allocate pages from the node returned by cpuset_mem_spread_node(). @@ -404,24 +404,24 @@ the following two situations: system overhead on those CPUs, including avoiding task load balancing if that is not needed. -When the per-cpuset flag "sched_load_balance" is enabled (the default -setting), it requests that all the CPUs in that cpusets allowed 'cpus' +When the per-cpuset flag "cpuset.sched_load_balance" is enabled (the default +setting), it requests that all the CPUs in that cpusets allowed 'cpuset.cpus' be contained in a single sched domain, ensuring that load balancing can move a task (not otherwised pinned, as by sched_setaffinity) from any CPU in that cpuset to any other. -When the per-cpuset flag "sched_load_balance" is disabled, then the +When the per-cpuset flag "cpuset.sched_load_balance" is disabled, then the scheduler will avoid load balancing across the CPUs in that cpuset, --except-- in so far as is necessary because some overlapping cpuset has "sched_load_balance" enabled. -So, for example, if the top cpuset has the flag "sched_load_balance" +So, for example, if the top cpuset has the flag "cpuset.sched_load_balance" enabled, then the scheduler will have one sched domain covering all -CPUs, and the setting of the "sched_load_balance" flag in any other +CPUs, and the setting of the "cpuset.sched_load_balance" flag in any other cpusets won't matter, as we're already fully load balancing. Therefore in the above two situations, the top cpuset flag -"sched_load_balance" should be disabled, and only some of the smaller, +"cpuset.sched_load_balance" should be disabled, and only some of the smaller, child cpusets have this flag enabled. When doing this, you don't usually want to leave any unpinned tasks in @@ -433,7 +433,7 @@ scheduler might not consider the possibility of load balancing that task to that underused CPU. Of course, tasks pinned to a particular CPU can be left in a cpuset -that disables "sched_load_balance" as those tasks aren't going anywhere +that disables "cpuset.sched_load_balance" as those tasks aren't going anywhere else anyway. There is an impedance mismatch here, between cpusets and sched domains. @@ -443,19 +443,19 @@ overlap and each CPU is in at most one sched domain. It is necessary for sched domains to be flat because load balancing across partially overlapping sets of CPUs would risk unstable dynamics that would be beyond our understanding. So if each of two partially -overlapping cpusets enables the flag 'sched_load_balance', then we +overlapping cpusets enables the flag 'cpuset.sched_load_balance', then we form a single sched domain that is a superset of both. We won't move a task to a CPU outside it cpuset, but the scheduler load balancing code might waste some compute cycles considering that possibility. This mismatch is why there is not a simple one-to-one relation -between which cpusets have the flag "sched_load_balance" enabled, +between which cpusets have the flag "cpuset.sched_load_balance" enabled, and the sched domain configuration. If a cpuset enables the flag, it will get balancing across all its CPUs, but if it disables the flag, it will only be assured of no load balancing if no other overlapping cpuset enables the flag. -If two cpusets have partially overlapping 'cpus' allowed, and only +If two cpusets have partially overlapping 'cpuset.cpus' allowed, and only one of them has this flag enabled, then the other may find its tasks only partially load balanced, just on the overlapping CPUs. This is just the general case of the top_cpuset example given a few @@ -468,23 +468,23 @@ load balancing to the other CPUs. 1.7.1 sched_load_balance implementation details. ------------------------------------------------ -The per-cpuset flag 'sched_load_balance' defaults to enabled (contrary +The per-cpuset flag 'cpuset.sched_load_balance' defaults to enabled (contrary to most cpuset flags.) When enabled for a cpuset, the kernel will ensure that it can load balance across all the CPUs in that cpuset (makes sure that all the CPUs in the cpus_allowed of that cpuset are in the same sched domain.) -If two overlapping cpusets both have 'sched_load_balance' enabled, +If two overlapping cpusets both have 'cpuset.sched_load_balance' enabled, then they will be (must be) both in the same sched domain. -If, as is the default, the top cpuset has 'sched_load_balance' enabled, +If, as is the default, the top cpuset has 'cpuset.sched_load_balance' enabled, then by the above that means there is a single sched domain covering the whole system, regardless of any other cpuset settings. The kernel commits to user space that it will avoid load balancing where it can. It will pick as fine a granularity partition of sched domains as it can while still providing load balancing for any set -of CPUs allowed to a cpuset having 'sched_load_balance' enabled. +of CPUs allowed to a cpuset having 'cpuset.sched_load_balance' enabled. The internal kernel cpuset to scheduler interface passes from the cpuset code to the scheduler code a partition of the load balanced @@ -495,9 +495,9 @@ all the CPUs that must be load balanced. The cpuset code builds a new such partition and passes it to the scheduler sched domain setup code, to have the sched domains rebuilt as necessary, whenever: - - the 'sched_load_balance' flag of a cpuset with non-empty CPUs changes, + - the 'cpuset.sched_load_balance' flag of a cpuset with non-empty CPUs changes, - or CPUs come or go from a cpuset with this flag enabled, - - or 'sched_relax_domain_level' value of a cpuset with non-empty CPUs + - or 'cpuset.sched_relax_domain_level' value of a cpuset with non-empty CPUs and with this flag enabled changes, - or a cpuset with non-empty CPUs and with this flag enabled is removed, - or a cpu is offlined/onlined. @@ -542,7 +542,7 @@ As the result, task B on CPU X need to wait task A or wait load balance on the next tick. For some applications in special situation, waiting 1 tick may be too long. -The 'sched_relax_domain_level' file allows you to request changing +The 'cpuset.sched_relax_domain_level' file allows you to request changing this searching range as you like. This file takes int value which indicates size of searching range in levels ideally as follows, otherwise initial value -1 that indicates the cpuset has no request. @@ -559,8 +559,8 @@ The system default is architecture dependent. The system default can be changed using the relax_domain_level= boot parameter. This file is per-cpuset and affect the sched domain where the cpuset -belongs to. Therefore if the flag 'sched_load_balance' of a cpuset -is disabled, then 'sched_relax_domain_level' have no effect since +belongs to. Therefore if the flag 'cpuset.sched_load_balance' of a cpuset +is disabled, then 'cpuset.sched_relax_domain_level' have no effect since there is no sched domain belonging the cpuset. If multiple cpusets are overlapping and hence they form a single sched @@ -607,9 +607,9 @@ from one cpuset to another, then the kernel will adjust the tasks memory placement, as above, the next time that the kernel attempts to allocate a page of memory for that task. -If a cpuset has its 'cpus' modified, then each task in that cpuset +If a cpuset has its 'cpuset.cpus' modified, then each task in that cpuset will have its allowed CPU placement changed immediately. Similarly, -if a tasks pid is written to another cpusets 'tasks' file, then its +if a tasks pid is written to another cpusets 'cpuset.tasks' file, then its allowed CPU placement is changed immediately. If such a task had been bound to some subset of its cpuset using the sched_setaffinity() call, the task will be allowed to run on any CPU allowed in its new cpuset, @@ -622,8 +622,8 @@ and the processor placement is updated immediately. Normally, once a page is allocated (given a physical page of main memory) then that page stays on whatever node it was allocated, so long as it remains allocated, even if the -cpusets memory placement policy 'mems' subsequently changes. -If the cpuset flag file 'memory_migrate' is set true, then when +cpusets memory placement policy 'cpuset.mems' subsequently changes. +If the cpuset flag file 'cpuset.memory_migrate' is set true, then when tasks are attached to that cpuset, any pages that task had allocated to it on nodes in its previous cpuset are migrated to the tasks new cpuset. The relative placement of the page within @@ -631,12 +631,12 @@ the cpuset is preserved during these migration operations if possible. For example if the page was on the second valid node of the prior cpuset then the page will be placed on the second valid node of the new cpuset. -Also if 'memory_migrate' is set true, then if that cpusets -'mems' file is modified, pages allocated to tasks in that -cpuset, that were on nodes in the previous setting of 'mems', +Also if 'cpuset.memory_migrate' is set true, then if that cpusets +'cpuset.mems' file is modified, pages allocated to tasks in that +cpuset, that were on nodes in the previous setting of 'cpuset.mems', will be moved to nodes in the new setting of 'mems.' Pages that were not in the tasks prior cpuset, or in the cpusets -prior 'mems' setting, will not be moved. +prior 'cpuset.mems' setting, will not be moved. There is an exception to the above. If hotplug functionality is used to remove all the CPUs that are currently assigned to a cpuset, @@ -678,8 +678,8 @@ and then start a subshell 'sh' in that cpuset: cd /dev/cpuset mkdir Charlie cd Charlie - /bin/echo 2-3 > cpus - /bin/echo 1 > mems + /bin/echo 2-3 > cpuset.cpus + /bin/echo 1 > cpuset.mems /bin/echo $$ > tasks sh # The subshell 'sh' is now running in cpuset Charlie @@ -725,10 +725,13 @@ Now you want to do something with this cpuset. In this directory you can find several files: # ls -cpu_exclusive memory_migrate mems tasks -cpus memory_pressure notify_on_release -mem_exclusive memory_spread_page sched_load_balance -mem_hardwall memory_spread_slab sched_relax_domain_level +cpuset.cpu_exclusive cpuset.memory_spread_slab +cpuset.cpus cpuset.mems +cpuset.mem_exclusive cpuset.sched_load_balance +cpuset.mem_hardwall cpuset.sched_relax_domain_level +cpuset.memory_migrate notify_on_release +cpuset.memory_pressure tasks +cpuset.memory_spread_page Reading them will give you information about the state of this cpuset: the CPUs and Memory Nodes it can use, the processes that are using @@ -736,13 +739,13 @@ it, its properties. By writing to these files you can manipulate the cpuset. Set some flags: -# /bin/echo 1 > cpu_exclusive +# /bin/echo 1 > cpuset.cpu_exclusive Add some cpus: -# /bin/echo 0-7 > cpus +# /bin/echo 0-7 > cpuset.cpus Add some mems: -# /bin/echo 0-7 > mems +# /bin/echo 0-7 > cpuset.mems Now attach your shell to this cpuset: # /bin/echo $$ > tasks @@ -774,28 +777,28 @@ echo "/sbin/cpuset_release_agent" > /dev/cpuset/release_agent This is the syntax to use when writing in the cpus or mems files in cpuset directories: -# /bin/echo 1-4 > cpus -> set cpus list to cpus 1,2,3,4 -# /bin/echo 1,2,3,4 > cpus -> set cpus list to cpus 1,2,3,4 +# /bin/echo 1-4 > cpuset.cpus -> set cpus list to cpus 1,2,3,4 +# /bin/echo 1,2,3,4 > cpuset.cpus -> set cpus list to cpus 1,2,3,4 To add a CPU to a cpuset, write the new list of CPUs including the CPU to be added. To add 6 to the above cpuset: -# /bin/echo 1-4,6 > cpus -> set cpus list to cpus 1,2,3,4,6 +# /bin/echo 1-4,6 > cpuset.cpus -> set cpus list to cpus 1,2,3,4,6 Similarly to remove a CPU from a cpuset, write the new list of CPUs without the CPU to be removed. To remove all the CPUs: -# /bin/echo "" > cpus -> clear cpus list +# /bin/echo "" > cpuset.cpus -> clear cpus list 2.3 Setting flags ----------------- The syntax is very simple: -# /bin/echo 1 > cpu_exclusive -> set flag 'cpu_exclusive' -# /bin/echo 0 > cpu_exclusive -> unset flag 'cpu_exclusive' +# /bin/echo 1 > cpuset.cpu_exclusive -> set flag 'cpuset.cpu_exclusive' +# /bin/echo 0 > cpuset.cpu_exclusive -> unset flag 'cpuset.cpu_exclusive' 2.4 Attaching processes ----------------------- |