docs: move DMA kAPI to Documentation/core-api

Move those files to the core-api, where they belong, renaming
them to ReST and adding to the core API index file.

Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Link: https://lore.kernel.org/r/a1517185418cb9d987f566ef85a5dd5c7c99f34e.1588345503.git.mchehab+huawei@kernel.org
Signed-off-by: Jonathan Corbet <corbet@lwn.net>

5 files changed, 1970 insertions, 0 deletions

diff --git a/Documentation/core-api/dma-api-howto.rst b/Documentation/core-api/dma-api-howto.rst
new file mode 100644
index 000000000000..358d495456d1
--- /dev/null
+++ b/Documentation/core-api/dma-api-howto.rst
@@ -0,0 +1,929 @@
+=========================
+Dynamic DMA mapping Guide
+=========================
+
+:Author: David S. Miller <davem@redhat.com>
+:Author: Richard Henderson <rth@cygnus.com>
+:Author: Jakub Jelinek <jakub@redhat.com>
+
+This is a guide to device driver writers on how to use the DMA API
+with example pseudo-code.  For a concise description of the API, see
+DMA-API.txt.
+
+CPU and DMA addresses
+=====================
+
+There are several kinds of addresses involved in the DMA API, and it's
+important to understand the differences.
+
+The kernel normally uses virtual addresses.  Any address returned by
+kmalloc(), vmalloc(), and similar interfaces is a virtual address and can
+be stored in a ``void *``.
+
+The virtual memory system (TLB, page tables, etc.) translates virtual
+addresses to CPU physical addresses, which are stored as "phys_addr_t" or
+"resource_size_t".  The kernel manages device resources like registers as
+physical addresses.  These are the addresses in /proc/iomem.  The physical
+address is not directly useful to a driver; it must use ioremap() to map
+the space and produce a virtual address.
+
+I/O devices use a third kind of address: a "bus address".  If a device has
+registers at an MMIO address, or if it performs DMA to read or write system
+memory, the addresses used by the device are bus addresses.  In some
+systems, bus addresses are identical to CPU physical addresses, but in
+general they are not.  IOMMUs and host bridges can produce arbitrary
+mappings between physical and bus addresses.
+
+From a device's point of view, DMA uses the bus address space, but it may
+be restricted to a subset of that space.  For example, even if a system
+supports 64-bit addresses for main memory and PCI BARs, it may use an IOMMU
+so devices only need to use 32-bit DMA addresses.
+
+Here's a picture and some examples::
+
+               CPU                  CPU                  Bus
+             Virtual              Physical             Address
+             Address              Address               Space
+              Space                Space
+
+            +-------+             +------+             +------+
+            |       |             |MMIO  |   Offset    |      |
+            |       |  Virtual    |Space |   applied   |      |
+          C +-------+ --------> B +------+ ----------> +------+ A
+            |       |  mapping    |      |   by host   |      |
+  +-----+   |       |             |      |   bridge    |      |   +--------+
+  |     |   |       |             +------+             |      |   |        |
+  | CPU |   |       |             | RAM  |             |      |   | Device |
+  |     |   |       |             |      |             |      |   |        |
+  +-----+   +-------+             +------+             +------+   +--------+
+            |       |  Virtual    |Buffer|   Mapping   |      |
+          X +-------+ --------> Y +------+ <---------- +------+ Z
+            |       |  mapping    | RAM  |   by IOMMU
+            |       |             |      |
+            |       |             |      |
+            +-------+             +------+
+
+During the enumeration process, the kernel learns about I/O devices and
+their MMIO space and the host bridges that connect them to the system.  For
+example, if a PCI device has a BAR, the kernel reads the bus address (A)
+from the BAR and converts it to a CPU physical address (B).  The address B
+is stored in a struct resource and usually exposed via /proc/iomem.  When a
+driver claims a device, it typically uses ioremap() to map physical address
+B at a virtual address (C).  It can then use, e.g., ioread32(C), to access
+the device registers at bus address A.
+
+If the device supports DMA, the driver sets up a buffer using kmalloc() or
+a similar interface, which returns a virtual address (X).  The virtual
+memory system maps X to a physical address (Y) in system RAM.  The driver
+can use virtual address X to access the buffer, but the device itself
+cannot because DMA doesn't go through the CPU virtual memory system.
+
+In some simple systems, the device can do DMA directly to physical address
+Y.  But in many others, there is IOMMU hardware that translates DMA
+addresses to physical addresses, e.g., it translates Z to Y.  This is part
+of the reason for the DMA API: the driver can give a virtual address X to
+an interface like dma_map_single(), which sets up any required IOMMU
+mapping and returns the DMA address Z.  The driver then tells the device to
+do DMA to Z, and the IOMMU maps it to the buffer at address Y in system
+RAM.
+
+So that Linux can use the dynamic DMA mapping, it needs some help from the
+drivers, namely it has to take into account that DMA addresses should be
+mapped only for the time they are actually used and unmapped after the DMA
+transfer.
+
+The following API will work of course even on platforms where no such
+hardware exists.
+
+Note that the DMA API works with any bus independent of the underlying
+microprocessor architecture. You should use the DMA API rather than the
+bus-specific DMA API, i.e., use the dma_map_*() interfaces rather than the
+pci_map_*() interfaces.
+
+First of all, you should make sure::
+
+	#include <linux/dma-mapping.h>
+
+is in your driver, which provides the definition of dma_addr_t.  This type
+can hold any valid DMA address for the platform and should be used
+everywhere you hold a DMA address returned from the DMA mapping functions.
+
+What memory is DMA'able?
+========================
+
+The first piece of information you must know is what kernel memory can
+be used with the DMA mapping facilities.  There has been an unwritten
+set of rules regarding this, and this text is an attempt to finally
+write them down.
+
+If you acquired your memory via the page allocator
+(i.e. __get_free_page*()) or the generic memory allocators
+(i.e. kmalloc() or kmem_cache_alloc()) then you may DMA to/from
+that memory using the addresses returned from those routines.
+
+This means specifically that you may _not_ use the memory/addresses
+returned from vmalloc() for DMA.  It is possible to DMA to the
+_underlying_ memory mapped into a vmalloc() area, but this requires
+walking page tables to get the physical addresses, and then
+translating each of those pages back to a kernel address using
+something like __va().  [ EDIT: Update this when we integrate
+Gerd Knorr's generic code which does this. ]
+
+This rule also means that you may use neither kernel image addresses
+(items in data/text/bss segments), nor module image addresses, nor
+stack addresses for DMA.  These could all be mapped somewhere entirely
+different than the rest of physical memory.  Even if those classes of
+memory could physically work with DMA, you'd need to ensure the I/O
+buffers were cacheline-aligned.  Without that, you'd see cacheline
+sharing problems (data corruption) on CPUs with DMA-incoherent caches.
+(The CPU could write to one word, DMA would write to a different one
+in the same cache line, and one of them could be overwritten.)
+
+Also, this means that you cannot take the return of a kmap()
+call and DMA to/from that.  This is similar to vmalloc().
+
+What about block I/O and networking buffers?  The block I/O and
+networking subsystems make sure that the buffers they use are valid
+for you to DMA from/to.
+
+DMA addressing capabilities
+===========================
+
+By default, the kernel assumes that your device can address 32-bits of DMA
+addressing.  For a 64-bit capable device, this needs to be increased, and for
+a device with limitations, it needs to be decreased.
+
+Special note about PCI: PCI-X specification requires PCI-X devices to support
+64-bit addressing (DAC) for all transactions.  And at least one platform (SGI
+SN2) requires 64-bit consistent allocations to operate correctly when the IO
+bus is in PCI-X mode.
+
+For correct operation, you must set the DMA mask to inform the kernel about
+your devices DMA addressing capabilities.
+
+This is performed via a call to dma_set_mask_and_coherent()::
+
+	int dma_set_mask_and_coherent(struct device *dev, u64 mask);
+
+which will set the mask for both streaming and coherent APIs together.  If you
+have some special requirements, then the following two separate calls can be
+used instead:
+
+	The setup for streaming mappings is performed via a call to
+	dma_set_mask()::
+
+		int dma_set_mask(struct device *dev, u64 mask);
+
+	The setup for consistent allocations is performed via a call
+	to dma_set_coherent_mask()::
+
+		int dma_set_coherent_mask(struct device *dev, u64 mask);
+
+Here, dev is a pointer to the device struct of your device, and mask is a bit
+mask describing which bits of an address your device supports.  Often the
+device struct of your device is embedded in the bus-specific device struct of
+your device.  For example, &pdev->dev is a pointer to the device struct of a
+PCI device (pdev is a pointer to the PCI device struct of your device).
+
+These calls usually return zero to indicated your device can perform DMA
+properly on the machine given the address mask you provided, but they might
+return an error if the mask is too small to be supportable on the given
+system.  If it returns non-zero, your device cannot perform DMA properly on
+this platform, and attempting to do so will result in undefined behavior.
+You must not use DMA on this device unless the dma_set_mask family of
+functions has returned success.
+
+This means that in the failure case, you have two options:
+
+1) Use some non-DMA mode for data transfer, if possible.
+2) Ignore this device and do not initialize it.
+
+It is recommended that your driver print a kernel KERN_WARNING message when
+setting the DMA mask fails.  In this manner, if a user of your driver reports
+that performance is bad or that the device is not even detected, you can ask
+them for the kernel messages to find out exactly why.
+
+The standard 64-bit addressing device would do something like this::
+
+	if (dma_set_mask_and_coherent(dev, DMA_BIT_MASK(64))) {
+		dev_warn(dev, "mydev: No suitable DMA available\n");
+		goto ignore_this_device;
+	}
+
+If the device only supports 32-bit addressing for descriptors in the
+coherent allocations, but supports full 64-bits for streaming mappings
+it would look like this::
+
+	if (dma_set_mask(dev, DMA_BIT_MASK(64))) {
+		dev_warn(dev, "mydev: No suitable DMA available\n");
+		goto ignore_this_device;
+	}
+
+The coherent mask will always be able to set the same or a smaller mask as
+the streaming mask. However for the rare case that a device driver only
+uses consistent allocations, one would have to check the return value from
+dma_set_coherent_mask().
+
+Finally, if your device can only drive the low 24-bits of
+address you might do something like::
+
+	if (dma_set_mask(dev, DMA_BIT_MASK(24))) {
+		dev_warn(dev, "mydev: 24-bit DMA addressing not available\n");
+		goto ignore_this_device;
+	}
+
+When dma_set_mask() or dma_set_mask_and_coherent() is successful, and
+returns zero, the kernel saves away this mask you have provided.  The
+kernel will use this information later when you make DMA mappings.
+
+There is a case which we are aware of at this time, which is worth
+mentioning in this documentation.  If your device supports multiple
+functions (for example a sound card provides playback and record
+functions) and the various different functions have _different_
+DMA addressing limitations, you may wish to probe each mask and
+only provide the functionality which the machine can handle.  It
+is important that the last call to dma_set_mask() be for the
+most specific mask.
+
+Here is pseudo-code showing how this might be done::
+
+	#define PLAYBACK_ADDRESS_BITS	DMA_BIT_MASK(32)
+	#define RECORD_ADDRESS_BITS	DMA_BIT_MASK(24)
+
+	struct my_sound_card *card;
+	struct device *dev;
+
+	...
+	if (!dma_set_mask(dev, PLAYBACK_ADDRESS_BITS)) {
+		card->playback_enabled = 1;
+	} else {
+		card->playback_enabled = 0;
+		dev_warn(dev, "%s: Playback disabled due to DMA limitations\n",
+		       card->name);
+	}
+	if (!dma_set_mask(dev, RECORD_ADDRESS_BITS)) {
+		card->record_enabled = 1;
+	} else {
+		card->record_enabled = 0;
+		dev_warn(dev, "%s: Record disabled due to DMA limitations\n",
+		       card->name);
+	}
+
+A sound card was used as an example here because this genre of PCI
+devices seems to be littered with ISA chips given a PCI front end,
+and thus retaining the 16MB DMA addressing limitations of ISA.
+
+Types of DMA mappings
+=====================
+
+There are two types of DMA mappings:
+
+- Consistent DMA mappings which are usually mapped at driver
+  initialization, unmapped at the end and for which the hardware should
+  guarantee that the device and the CPU can access the data
+  in parallel and will see updates made by each other without any
+  explicit software flushing.
+
+  Think of "consistent" as "synchronous" or "coherent".
+
+  The current default is to return consistent memory in the low 32
+  bits of the DMA space.  However, for future compatibility you should
+  set the consistent mask even if this default is fine for your
+  driver.
+
+  Good examples of what to use consistent mappings for are:
+
+	- Network card DMA ring descriptors.
+	- SCSI adapter mailbox command data structures.
+	- Device firmware microcode executed out of
+	  main memory.
+
+  The invariant these examples all require is that any CPU store
+  to memory is immediately visible to the device, and vice
+  versa.  Consistent mappings guarantee this.
+
+  .. important::
+
+	     Consistent DMA memory does not preclude the usage of
+	     proper memory barriers.  The CPU may reorder stores to
+	     consistent memory just as it may normal memory.  Example:
+	     if it is important for the device to see the first word
+	     of a descriptor updated before the second, you must do
+	     something like::
+
+		desc->word0 = address;
+		wmb();
+		desc->word1 = DESC_VALID;
+
+             in order to get correct behavior on all platforms.
+
+	     Also, on some platforms your driver may need to flush CPU write
+	     buffers in much the same way as it needs to flush write buffers
+	     found in PCI bridges (such as by reading a register's value
+	     after writing it).
+
+- Streaming DMA mappings which are usually mapped for one DMA
+  transfer, unmapped right after it (unless you use dma_sync_* below)
+  and for which hardware can optimize for sequential accesses.
+
+  Think of "streaming" as "asynchronous" or "outside the coherency
+  domain".
+
+  Good examples of what to use streaming mappings for are:
+
+	- Networking buffers transmitted/received by a device.
+	- Filesystem buffers written/read by a SCSI device.
+
+  The interfaces for using this type of mapping were designed in
+  such a way that an implementation can make whatever performance
+  optimizations the hardware allows.  To this end, when using
+  such mappings you must be explicit about what you want to happen.
+
+Neither type of DMA mapping has alignment restrictions that come from
+the underlying bus, although some devices may have such restrictions.
+Also, systems with caches that aren't DMA-coherent will work better
+when the underlying buffers don't share cache lines with other data.
+
+
+Using Consistent DMA mappings
+=============================
+
+To allocate and map large (PAGE_SIZE or so) consistent DMA regions,
+you should do::
+
+	dma_addr_t dma_handle;
+
+	cpu_addr = dma_alloc_coherent(dev, size, &dma_handle, gfp);
+
+where device is a ``struct device *``. This may be called in interrupt
+context with the GFP_ATOMIC flag.
+
+Size is the length of the region you want to allocate, in bytes.
+
+This routine will allocate RAM for that region, so it acts similarly to
+__get_free_pages() (but takes size instead of a page order).  If your
+driver needs regions sized smaller than a page, you may prefer using
+the dma_pool interface, described below.
+
+The consistent DMA mapping interfaces, will by default return a DMA address
+which is 32-bit addressable.  Even if the device indicates (via the DMA mask)
+that it may address the upper 32-bits, consistent allocation will only
+return > 32-bit addresses for DMA if the consistent DMA mask has been
+explicitly changed via dma_set_coherent_mask().  This is true of the
+dma_pool interface as well.
+
+dma_alloc_coherent() returns two values: the virtual address which you
+can use to access it from the CPU and dma_handle which you pass to the
+card.
+
+The CPU virtual address and the DMA address are both
+guaranteed to be aligned to the smallest PAGE_SIZE order which
+is greater than or equal to the requested size.  This invariant
+exists (for example) to guarantee that if you allocate a chunk
+which is smaller than or equal to 64 kilobytes, the extent of the
+buffer you receive will not cross a 64K boundary.
+
+To unmap and free such a DMA region, you call::
+
+	dma_free_coherent(dev, size, cpu_addr, dma_handle);
+
+where dev, size are the same as in the above call and cpu_addr and
+dma_handle are the values dma_alloc_coherent() returned to you.
+This function may not be called in interrupt context.
+
+If your driver needs lots of smaller memory regions, you can write
+custom code to subdivide pages returned by dma_alloc_coherent(),
+or you can use the dma_pool API to do that.  A dma_pool is like
+a kmem_cache, but it uses dma_alloc_coherent(), not __get_free_pages().
+Also, it understands common hardware constraints for alignment,
+like queue heads needing to be aligned on N byte boundaries.
+
+Create a dma_pool like this::
+
+	struct dma_pool *pool;
+
+	pool = dma_pool_create(name, dev, size, align, boundary);
+
+The "name" is for diagnostics (like a kmem_cache name); dev and size
+are as above.  The device's hardware alignment requirement for this
+type of data is "align" (which is expressed in bytes, and must be a
+power of two).  If your device has no boundary crossing restrictions,
+pass 0 for boundary; passing 4096 says memory allocated from this pool
+must not cross 4KByte boundaries (but at that time it may be better to
+use dma_alloc_coherent() directly instead).
+
+Allocate memory from a DMA pool like this::
+
+	cpu_addr = dma_pool_alloc(pool, flags, &dma_handle);
+
+flags are GFP_KERNEL if blocking is permitted (not in_interrupt nor
+holding SMP locks), GFP_ATOMIC otherwise.  Like dma_alloc_coherent(),
+this returns two values, cpu_addr and dma_handle.
+
+Free memory that was allocated from a dma_pool like this::
+
+	dma_pool_free(pool, cpu_addr, dma_handle);
+
+where pool is what you passed to dma_pool_alloc(), and cpu_addr and
+dma_handle are the values dma_pool_alloc() returned. This function
+may be called in interrupt context.
+
+Destroy a dma_pool by calling::
+
+	dma_pool_destroy(pool);
+
+Make sure you've called dma_pool_free() for all memory allocated
+from a pool before you destroy the pool. This function may not
+be called in interrupt context.
+
+DMA Direction
+=============
+
+The interfaces described in subsequent portions of this document
+take a DMA direction argument, which is an integer and takes on
+one of the following values::
+
+ DMA_BIDIRECTIONAL
+ DMA_TO_DEVICE
+ DMA_FROM_DEVICE
+ DMA_NONE
+
+You should provide the exact DMA direction if you know it.
+
+DMA_TO_DEVICE means "from main memory to the device"
+DMA_FROM_DEVICE means "from the device to main memory"
+It is the direction in which the data moves during the DMA
+transfer.
+
+You are _strongly_ encouraged to specify this as precisely
+as you possibly can.
+
+If you absolutely cannot know the direction of the DMA transfer,
+specify DMA_BIDIRECTIONAL.  It means that the DMA can go in
+either direction.  The platform guarantees that you may legally
+specify this, and that it will work, but this may be at the
+cost of performance for example.
+
+The value DMA_NONE is to be used for debugging.  One can
+hold this in a data structure before you come to know the
+precise direction, and this will help catch cases where your
+direction tracking logic has failed to set things up properly.
+
+Another advantage of specifying this value precisely (outside of
+potential platform-specific optimizations of such) is for debugging.
+Some platforms actually have a write permission boolean which DMA
+mappings can be marked with, much like page protections in the user
+program address space.  Such platforms can and do report errors in the
+kernel logs when the DMA controller hardware detects violation of the
+permission setting.
+
+Only streaming mappings specify a direction, consistent mappings
+implicitly have a direction attribute setting of
+DMA_BIDIRECTIONAL.
+
+The SCSI subsystem tells you the direction to use in the
+'sc_data_direction' member of the SCSI command your driver is
+working on.
+
+For Networking drivers, it's a rather simple affair.  For transmit
+packets, map/unmap them with the DMA_TO_DEVICE direction
+specifier.  For receive packets, just the opposite, map/unmap them
+with the DMA_FROM_DEVICE direction specifier.
+
+Using Streaming DMA mappings
+============================
+
+The streaming DMA mapping routines can be called from interrupt
+context.  There are two versions of each map/unmap, one which will
+map/unmap a single memory region, and one which will map/unmap a
+scatterlist.
+
+To map a single region, you do::
+
+	struct device *dev = &my_dev->dev;
+	dma_addr_t dma_handle;
+	void *addr = buffer->ptr;
+	size_t size = buffer->len;
+
+	dma_handle = dma_map_single(dev, addr, size, direction);
+	if (dma_mapping_error(dev, dma_handle)) {
+		/*
+		 * reduce current DMA mapping usage,
+		 * delay and try again later or
+		 * reset driver.
+		 */
+		goto map_error_handling;
+	}
+
+and to unmap it::
+
+	dma_unmap_single(dev, dma_handle, size, direction);
+
+You should call dma_mapping_error() as dma_map_single() could fail and return
+error.  Doing so will ensure that the mapping code will work correctly on all
+DMA implementations without any dependency on the specifics of the underlying
+implementation. Using the returned address without checking for errors could
+result in failures ranging from panics to silent data corruption.  The same
+applies to dma_map_page() as well.
+
+You should call dma_unmap_single() when the DMA activity is finished, e.g.,
+from the interrupt which told you that the DMA transfer is done.
+
+Using CPU pointers like this for single mappings has a disadvantage:
+you cannot reference HIGHMEM memory in this way.  Thus, there is a
+map/unmap interface pair akin to dma_{map,unmap}_single().  These
+interfaces deal with page/offset pairs instead of CPU pointers.
+Specifically::
+
+	struct device *dev = &my_dev->dev;
+	dma_addr_t dma_handle;
+	struct page *page = buffer->page;
+	unsigned long offset = buffer->offset;
+	size_t size = buffer->len;
+
+	dma_handle = dma_map_page(dev, page, offset, size, direction);
+	if (dma_mapping_error(dev, dma_handle)) {
+		/*
+		 * reduce current DMA mapping usage,
+		 * delay and try again later or
+		 * reset driver.
+		 */
+		goto map_error_handling;
+	}
+
+	...
+
+	dma_unmap_page(dev, dma_handle, size, direction);
+
+Here, "offset" means byte offset within the given page.
+
+You should call dma_mapping_error() as dma_map_page() could fail and return
+error as outlined under the dma_map_single() discussion.
+
+You should call dma_unmap_page() when the DMA activity is finished, e.g.,
+from the interrupt which told you that the DMA transfer is done.
+
+With scatterlists, you map a region gathered from several regions by::
+
+	int i, count = dma_map_sg(dev, sglist, nents, direction);
+	struct scatterlist *sg;
+
+	for_each_sg(sglist, sg, count, i) {
+		hw_address[i] = sg_dma_address(sg);
+		hw_len[i] = sg_dma_len(sg);
+	}
+
+where nents is the number of entries in the sglist.
+
+The implementation is free to merge several consecutive sglist entries
+into one (e.g. if DMA mapping is done with PAGE_SIZE granularity, any
+consecutive sglist entries can be merged into one provided the first one
+ends and the second one starts on a page boundary - in fact this is a huge
+advantage for cards which either cannot do scatter-gather or have very
+limited number of scatter-gather entries) and returns the actual number
+of sg entries it mapped them to. On failure 0 is returned.
+
+Then you should loop count times (note: this can be less than nents times)
+and use sg_dma_address() and sg_dma_len() macros where you previously
+accessed sg->address and sg->length as shown above.
+
+To unmap a scatterlist, just call::
+
+	dma_unmap_sg(dev, sglist, nents, direction);
+
+Again, make sure DMA activity has already finished.
+
+.. note::
+
+	The 'nents' argument to the dma_unmap_sg call must be
+	the _same_ one you passed into the dma_map_sg call,
+	it should _NOT_ be the 'count' value _returned_ from the
+	dma_map_sg call.
+
+Every dma_map_{single,sg}() call should have its dma_unmap_{single,sg}()
+counterpart, because the DMA address space is a shared resource and
+you could render the machine unusable by consuming all DMA addresses.
+
+If you need to use the same streaming DMA region multiple times and touch
+the data in between the DMA transfers, the buffer needs to be synced
+properly in order for the CPU and device to see the most up-to-date and
+correct copy of the DMA buffer.
+
+So, firstly, just map it with dma_map_{single,sg}(), and after each DMA
+transfer call either::
+
+	dma_sync_single_for_cpu(dev, dma_handle, size, direction);
+
+or::
+
+	dma_sync_sg_for_cpu(dev, sglist, nents, direction);
+
+as appropriate.
+
+Then, if you wish to let the device get at the DMA area again,
+finish accessing the data with the CPU, and then before actually
+giving the buffer to the hardware call either::
+
+	dma_sync_single_for_device(dev, dma_handle, size, direction);
+
+or::
+
+	dma_sync_sg_for_device(dev, sglist, nents, direction);
+
+as appropriate.
+
+.. note::
+
+	      The 'nents' argument to dma_sync_sg_for_cpu() and
+	      dma_sync_sg_for_device() must be the same passed to
+	      dma_map_sg(). It is _NOT_ the count returned by
+	      dma_map_sg().
+
+After the last DMA transfer call one of the DMA unmap routines
+dma_unmap_{single,sg}(). If you don't touch the data from the first
+dma_map_*() call till dma_unmap_*(), then you don't have to call the
+dma_sync_*() routines at all.
+
+Here is pseudo code which shows a situation in which you would need
+to use the dma_sync_*() interfaces::
+
+	my_card_setup_receive_buffer(struct my_card *cp, char *buffer, int len)
+	{
+		dma_addr_t mapping;
+
+		mapping = dma_map_single(cp->dev, buffer, len, DMA_FROM_DEVICE);
+		if (dma_mapping_error(cp->dev, mapping)) {
+			/*
+			 * reduce current DMA mapping usage,
+			 * delay and try again later or
+			 * reset driver.
+			 */
+			goto map_error_handling;
+		}
+
+		cp->rx_buf = buffer;
+		cp->rx_len = len;
+		cp->rx_dma = mapping;
+
+		give_rx_buf_to_card(cp);
+	}
+
+	...
+
+	my_card_interrupt_handler(int irq, void *devid, struct pt_regs *regs)
+	{
+		struct my_card *cp = devid;
+
+		...
+		if (read_card_status(cp) == RX_BUF_TRANSFERRED) {
+			struct my_card_header *hp;
+
+			/* Examine the header to see if we wish
+			 * to accept the data.  But synchronize
+			 * the DMA transfer with the CPU first
+			 * so that we see updated contents.
+			 */
+			dma_sync_single_for_cpu(&cp->dev, cp->rx_dma,
+						cp->rx_len,
+						DMA_FROM_DEVICE);
+
+			/* Now it is safe to examine the buffer. */
+			hp = (struct my_card_header *) cp->rx_buf;
+			if (header_is_ok(hp)) {
+				dma_unmap_single(&cp->dev, cp->rx_dma, cp->rx_len,
+						 DMA_FROM_DEVICE);
+				pass_to_upper_layers(cp->rx_buf);
+				make_and_setup_new_rx_buf(cp);
+			} else {
+				/* CPU should not write to
+				 * DMA_FROM_DEVICE-mapped area,
+				 * so dma_sync_single_for_device() is
+				 * not needed here. It would be required
+				 * for DMA_BIDIRECTIONAL mapping if
+				 * the memory was modified.
+				 */
+				give_rx_buf_to_card(cp);
+			}
+		}
+	}
+
+Drivers converted fully to this interface should not use virt_to_bus() any
+longer, nor should they use bus_to_virt(). Some drivers have to be changed a
+little bit, because there is no longer an equivalent to bus_to_virt() in the
+dynamic DMA mapping scheme - you have to always store the DMA addresses
+returned by the dma_alloc_coherent(), dma_pool_alloc(), and dma_map_single()
+calls (dma_map_sg() stores them in the scatterlist itself if the platform
+supports dynamic DMA mapping in hardware) in your driver structures and/or
+in the card registers.
+
+All drivers should be using these interfaces with no exceptions.  It
+is planned to completely remove virt_to_bus() and bus_to_virt() as
+they are entirely deprecated.  Some ports already do not provide these
+as it is impossible to correctly support them.
+
+Handling Errors
+===============
+
+DMA address space is limited on some architectures and an allocation
+failure can be determined by:
+
+- checking if dma_alloc_coherent() returns NULL or dma_map_sg returns 0
+
+- checking the dma_addr_t returned from dma_map_single() and dma_map_page()
+  by using dma_mapping_error()::
+
+	dma_addr_t dma_handle;
+
+	dma_handle = dma_map_single(dev, addr, size, direction);
+	if (dma_mapping_error(dev, dma_handle)) {
+		/*
+		 * reduce current DMA mapping usage,
+		 * delay and try again later or
+		 * reset driver.
+		 */
+		goto map_error_handling;
+	}
+
+- unmap pages that are already mapped, when mapping error occurs in the middle
+  of a multiple page mapping attempt. These example are applicable to
+  dma_map_page() as well.
+
+Example 1::
+
+	dma_addr_t dma_handle1;
+	dma_addr_t dma_handle2;
+
+	dma_handle1 = dma_map_single(dev, addr, size, direction);
+	if (dma_mapping_error(dev, dma_handle1)) {
+		/*
+		 * reduce current DMA mapping usage,
+		 * delay and try again later or
+		 * reset driver.
+		 */
+		goto map_error_handling1;
+	}
+	dma_handle2 = dma_map_single(dev, addr, size, direction);
+	if (dma_mapping_error(dev, dma_handle2)) {
+		/*
+		 * reduce current DMA mapping usage,
+		 * delay and try again later or
+		 * reset driver.
+		 */
+		goto map_error_handling2;
+	}
+
+	...
+
+	map_error_handling2:
+		dma_unmap_single(dma_handle1);
+	map_error_handling1:
+
+Example 2::
+
+	/*
+	 * if buffers are allocated in a loop, unmap all mapped buffers when
+	 * mapping error is detected in the middle
+	 */
+
+	dma_addr_t dma_addr;
+	dma_addr_t array[DMA_BUFFERS];
+	int save_index = 0;
+
+	for (i = 0; i < DMA_BUFFERS; i++) {
+
+		...
+
+		dma_addr = dma_map_single(dev, addr, size, direction);
+		if (dma_mapping_error(dev, dma_addr)) {
+			/*
+			 * reduce current DMA mapping usage,
+			 * delay and try again later or
+			 * reset driver.
+			 */
+			goto map_error_handling;
+		}
+		array[i].dma_addr = dma_addr;
+		save_index++;
+	}
+
+	...
+
+	map_error_handling:
+
+	for (i = 0; i < save_index; i++) {
+
+		...
+
+		dma_unmap_single(array[i].dma_addr);
+	}
+
+Networking drivers must call dev_kfree_skb() to free the socket buffer
+and return NETDEV_TX_OK if the DMA mapping fails on the transmit hook
+(ndo_start_xmit). This means that the socket buffer is just dropped in
+the failure case.
+
+SCSI drivers must return SCSI_MLQUEUE_HOST_BUSY if the DMA mapping
+fails in the queuecommand hook. This means that the SCSI subsystem
+passes the command to the driver again later.
+
+Optimizing Unmap State Space Consumption
+========================================
+
+On many platforms, dma_unmap_{single,page}() is simply a nop.
+Therefore, keeping track of the mapping address and length is a waste
+of space.  Instead of filling your drivers up with ifdefs and the like
+to "work around" this (which would defeat the whole purpose of a
+portable API) the following facilities are provided.
+
+Actually, instead of describing the macros one by one, we'll
+transform some example code.
+
+1) Use DEFINE_DMA_UNMAP_{ADDR,LEN} in state saving structures.
+   Example, before::
+
+	struct ring_state {
+		struct sk_buff *skb;
+		dma_addr_t mapping;
+		__u32 len;
+	};
+
+   after::
+
+	struct ring_state {
+		struct sk_buff *skb;
+		DEFINE_DMA_UNMAP_ADDR(mapping);
+		DEFINE_DMA_UNMAP_LEN(len);
+	};
+
+2) Use dma_unmap_{addr,len}_set() to set these values.
+   Example, before::
+
+	ringp->mapping = FOO;
+	ringp->len = BAR;
+
+   after::
+
+	dma_unmap_addr_set(ringp, mapping, FOO);
+	dma_unmap_len_set(ringp, len, BAR);
+
+3) Use dma_unmap_{addr,len}() to access these values.
+   Example, before::
+
+	dma_unmap_single(dev, ringp->mapping, ringp->len,
+			 DMA_FROM_DEVICE);
+
+   after::
+
+	dma_unmap_single(dev,
+			 dma_unmap_addr(ringp, mapping),
+			 dma_unmap_len(ringp, len),
+			 DMA_FROM_DEVICE);
+
+It really should be self-explanatory.  We treat the ADDR and LEN
+separately, because it is possible for an implementation to only
+need the address in order to perform the unmap operation.
+
+Platform Issues
+===============
+
+If you are just writing drivers for Linux and do not maintain
+an architecture port for the kernel, you can safely skip down
+to "Closing".
+
+1) Struct scatterlist requirements.
+
+   You need to enable CONFIG_NEED_SG_DMA_LENGTH if the architecture
+   supports IOMMUs (including software IOMMU).
+
+2) ARCH_DMA_MINALIGN
+
+   Architectures must ensure that kmalloc'ed buffer is
+   DMA-safe. Drivers and subsystems depend on it. If an architecture
+   isn't fully DMA-coherent (i.e. hardware doesn't ensure that data in
+   the CPU cache is identical to data in main memory),
+   ARCH_DMA_MINALIGN must be set so that the memory allocator
+   makes sure that kmalloc'ed buffer doesn't share a cache line with
+   the others. See arch/arm/include/asm/cache.h as an example.
+
+   Note that ARCH_DMA_MINALIGN is about DMA memory alignment
+   constraints. You don't need to worry about the architecture data
+   alignment constraints (e.g. the alignment constraints about 64-bit
+   objects).
+
+Closing
+=======
+
+This document, and the API itself, would not be in its current
+form without the feedback and suggestions from numerous individuals.
+We would like to specifically mention, in no particular order, the
+following people::
+
+	Russell King <rmk@arm.linux.org.uk>
+	Leo Dagum <dagum@barrel.engr.sgi.com>
+	Ralf Baechle <ralf@oss.sgi.com>
+	Grant Grundler <grundler@cup.hp.com>
+	Jay Estabrook <Jay.Estabrook@compaq.com>
+	Thomas Sailer <sailer@ife.ee.ethz.ch>
+	Andrea Arcangeli <andrea@suse.de>
+	Jens Axboe <jens.axboe@oracle.com>
+	David Mosberger-Tang <davidm@hpl.hp.com>
diff --git a/Documentation/core-api/dma-api.rst b/Documentation/core-api/dma-api.rst
new file mode 100644
index 000000000000..2d8d2fed7317
--- /dev/null
+++ b/Documentation/core-api/dma-api.rst
@@ -0,0 +1,745 @@
+============================================
+Dynamic DMA mapping using the generic device
+============================================
+
+:Author: James E.J. Bottomley <James.Bottomley@HansenPartnership.com>
+
+This document describes the DMA API.  For a more gentle introduction
+of the API (and actual examples), see Documentation/DMA-API-HOWTO.txt.
+
+This API is split into two pieces.  Part I describes the basic API.
+Part II describes extensions for supporting non-consistent memory
+machines.  Unless you know that your driver absolutely has to support
+non-consistent platforms (this is usually only legacy platforms) you
+should only use the API described in part I.
+
+Part I - dma_API
+----------------
+
+To get the dma_API, you must #include <linux/dma-mapping.h>.  This
+provides dma_addr_t and the interfaces described below.
+
+A dma_addr_t can hold any valid DMA address for the platform.  It can be
+given to a device to use as a DMA source or target.  A CPU cannot reference
+a dma_addr_t directly because there may be translation between its physical
+address space and the DMA address space.
+
+Part Ia - Using large DMA-coherent buffers
+------------------------------------------
+
+::
+
+	void *
+	dma_alloc_coherent(struct device *dev, size_t size,
+			   dma_addr_t *dma_handle, gfp_t flag)
+
+Consistent memory is memory for which a write by either the device or
+the processor can immediately be read by the processor or device
+without having to worry about caching effects.  (You may however need
+to make sure to flush the processor's write buffers before telling
+devices to read that memory.)
+
+This routine allocates a region of <size> bytes of consistent memory.
+
+It returns a pointer to the allocated region (in the processor's virtual
+address space) or NULL if the allocation failed.
+
+It also returns a <dma_handle> which may be cast to an unsigned integer the
+same width as the bus and given to the device as the DMA address base of
+the region.
+
+Note: consistent memory can be expensive on some platforms, and the
+minimum allocation length may be as big as a page, so you should
+consolidate your requests for consistent memory as much as possible.
+The simplest way to do that is to use the dma_pool calls (see below).
+
+The flag parameter (dma_alloc_coherent() only) allows the caller to
+specify the ``GFP_`` flags (see kmalloc()) for the allocation (the
+implementation may choose to ignore flags that affect the location of
+the returned memory, like GFP_DMA).
+
+::
+
+	void
+	dma_free_coherent(struct device *dev, size_t size, void *cpu_addr,
+			  dma_addr_t dma_handle)
+
+Free a region of consistent memory you previously allocated.  dev,
+size and dma_handle must all be the same as those passed into
+dma_alloc_coherent().  cpu_addr must be the virtual address returned by
+the dma_alloc_coherent().
+
+Note that unlike their sibling allocation calls, these routines
+may only be called with IRQs enabled.
+
+
+Part Ib - Using small DMA-coherent buffers
+------------------------------------------
+
+To get this part of the dma_API, you must #include <linux/dmapool.h>
+
+Many drivers need lots of small DMA-coherent memory regions for DMA
+descriptors or I/O buffers.  Rather than allocating in units of a page
+or more using dma_alloc_coherent(), you can use DMA pools.  These work
+much like a struct kmem_cache, except that they use the DMA-coherent allocator,
+not __get_free_pages().  Also, they understand common hardware constraints
+for alignment, like queue heads needing to be aligned on N-byte boundaries.
+
+
+::
+
+	struct dma_pool *
+	dma_pool_create(const char *name, struct device *dev,
+			size_t size, size_t align, size_t alloc);
+
+dma_pool_create() initializes a pool of DMA-coherent buffers
+for use with a given device.  It must be called in a context which
+can sleep.
+
+The "name" is for diagnostics (like a struct kmem_cache name); dev and size
+are like what you'd pass to dma_alloc_coherent().  The device's hardware
+alignment requirement for this type of data is "align" (which is expressed
+in bytes, and must be a power of two).  If your device has no boundary
+crossing restrictions, pass 0 for alloc; passing 4096 says memory allocated
+from this pool must not cross 4KByte boundaries.
+
+::
+
+	void *
+	dma_pool_zalloc(struct dma_pool *pool, gfp_t mem_flags,
+		        dma_addr_t *handle)
+
+Wraps dma_pool_alloc() and also zeroes the returned memory if the
+allocation attempt succeeded.
+
+
+::
+
+	void *
+	dma_pool_alloc(struct dma_pool *pool, gfp_t gfp_flags,
+		       dma_addr_t *dma_handle);
+
+This allocates memory from the pool; the returned memory will meet the
+size and alignment requirements specified at creation time.  Pass
+GFP_ATOMIC to prevent blocking, or if it's permitted (not
+in_interrupt, not holding SMP locks), pass GFP_KERNEL to allow
+blocking.  Like dma_alloc_coherent(), this returns two values:  an
+address usable by the CPU, and the DMA address usable by the pool's
+device.
+
+::
+
+	void
+	dma_pool_free(struct dma_pool *pool, void *vaddr,
+		      dma_addr_t addr);
+
+This puts memory back into the pool.  The pool is what was passed to
+dma_pool_alloc(); the CPU (vaddr) and DMA addresses are what
+were returned when that routine allocated the memory being freed.
+
+::
+
+	void
+	dma_pool_destroy(struct dma_pool *pool);
+
+dma_pool_destroy() frees the resources of the pool.  It must be
+called in a context which can sleep.  Make sure you've freed all allocated
+memory back to the pool before you destroy it.
+
+
+Part Ic - DMA addressing limitations
+------------------------------------
+
+::
+
+	int
+	dma_set_mask_and_coherent(struct device *dev, u64 mask)
+
+Checks to see if the mask is possible and updates the device
+streaming and coherent DMA mask parameters if it is.
+
+Returns: 0 if successful and a negative error if not.
+
+::
+
+	int
+	dma_set_mask(struct device *dev, u64 mask)
+
+Checks to see if the mask is possible and updates the device
+parameters if it is.
+
+Returns: 0 if successful and a negative error if not.
+
+::
+
+	int
+	dma_set_coherent_mask(struct device *dev, u64 mask)
+
+Checks to see if the mask is possible and updates the device
+parameters if it is.
+
+Returns: 0 if successful and a negative error if not.
+
+::
+
+	u64
+	dma_get_required_mask(struct device *dev)
+
+This API returns the mask that the platform requires to
+operate efficiently.  Usually this means the returned mask
+is the minimum required to cover all of memory.  Examining the
+required mask gives drivers with variable descriptor sizes the
+opportunity to use smaller descriptors as necessary.
+
+Requesting the required mask does not alter the current mask.  If you
+wish to take advantage of it, you should issue a dma_set_mask()
+call to set the mask to the value returned.
+
+::
+
+	size_t
+	dma_max_mapping_size(struct device *dev);
+
+Returns the maximum size of a mapping for the device. The size parameter
+of the mapping functions like dma_map_single(), dma_map_page() and
+others should not be larger than the returned value.
+
+::
+
+	unsigned long
+	dma_get_merge_boundary(struct device *dev);
+
+Returns the DMA merge boundary. If the device cannot merge any the DMA address
+segments, the function returns 0.
+
+Part Id - Streaming DMA mappings
+--------------------------------
+
+::
+
+	dma_addr_t
+	dma_map_single(struct device *dev, void *cpu_addr, size_t size,
+		       enum dma_data_direction direction)
+
+Maps a piece of processor virtual memory so it can be accessed by the
+device and returns the DMA address of the memory.
+
+The direction for both APIs may be converted freely by casting.
+However the dma_API uses a strongly typed enumerator for its
+direction:
+
+======================= =============================================
+DMA_NONE		no direction (used for debugging)
+DMA_TO_DEVICE		data is going from the memory to the device
+DMA_FROM_DEVICE		data is coming from the device to the memory
+DMA_BIDIRECTIONAL	direction isn't known
+======================= =============================================
+
+.. note::
+
+	Not all memory regions in a machine can be mapped by this API.
+	Further, contiguous kernel virtual space may not be contiguous as
+	physical memory.  Since this API does not provide any scatter/gather
+	capability, it will fail if the user tries to map a non-physically
+	contiguous piece of memory.  For this reason, memory to be mapped by
+	this API should be obtained from sources which guarantee it to be
+	physically contiguous (like kmalloc).
+
+	Further, the DMA address of the memory must be within the
+	dma_mask of the device (the dma_mask is a bit mask of the
+	addressable region for the device, i.e., if the DMA address of
+	the memory ANDed with the dma_mask is still equal to the DMA
+	address, then the device can perform DMA to the memory).  To
+	ensure that the memory allocated by kmalloc is within the dma_mask,
+	the driver may specify various platform-dependent flags to restrict
+	the DMA address range of the allocation (e.g., on x86, GFP_DMA
+	guarantees to be within the first 16MB of available DMA addresses,
+	as required by ISA devices).
+
+	Note also that the above constraints on physical contiguity and
+	dma_mask may not apply if the platform has an IOMMU (a device which
+	maps an I/O DMA address to a physical memory address).  However, to be
+	portable, device driver writers may *not* assume that such an IOMMU
+	exists.
+
+.. warning::
+
+	Memory coherency operates at a granularity called the cache
+	line width.  In order for memory mapped by this API to operate
+	correctly, the mapped region must begin exactly on a cache line
+	boundary and end exactly on one (to prevent two separately mapped
+	regions from sharing a single cache line).  Since the cache line size
+	may not be known at compile time, the API will not enforce this
+	requirement.  Therefore, it is recommended that driver writers who
+	don't take special care to determine the cache line size at run time
+	only map virtual regions that begin and end on page boundaries (which
+	are guaranteed also to be cache line boundaries).
+
+	DMA_TO_DEVICE synchronisation must be done after the last modification
+	of the memory region by the software and before it is handed off to
+	the device.  Once this primitive is used, memory covered by this
+	primitive should be treated as read-only by the device.  If the device
+	may write to it at any point, it should be DMA_BIDIRECTIONAL (see
+	below).
+
+	DMA_FROM_DEVICE synchronisation must be done before the driver
+	accesses data that may be changed by the device.  This memory should
+	be treated as read-only by the driver.  If the driver needs to write
+	to it at any point, it should be DMA_BIDIRECTIONAL (see below).
+
+	DMA_BIDIRECTIONAL requires special handling: it means that the driver
+	isn't sure if the memory was modified before being handed off to the
+	device and also isn't sure if the device will also modify it.  Thus,
+	you must always sync bidirectional memory twice: once before the
+	memory is handed off to the device (to make sure all memory changes
+	are flushed from the processor) and once before the data may be
+	accessed after being used by the device (to make sure any processor
+	cache lines are updated with data that the device may have changed).
+
+::
+
+	void
+	dma_unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size,
+			 enum dma_data_direction direction)
+
+Unmaps the region previously mapped.  All the parameters passed in
+must be identical to those passed in (and returned) by the mapping
+API.
+
+::
+
+	dma_addr_t
+	dma_map_page(struct device *dev, struct page *page,
+		     unsigned long offset, size_t size,
+		     enum dma_data_direction direction)
+
+	void
+	dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
+		       enum dma_data_direction direction)
+
+API for mapping and unmapping for pages.  All the notes and warnings
+for the other mapping APIs apply here.  Also, although the <offset>
+and <size> parameters are provided to do partial page mapping, it is
+recommended that you never use these unless you really know what the
+cache width is.
+
+::
+
+	dma_addr_t
+	dma_map_resource(struct device *dev, phys_addr_t phys_addr, size_t size,
+			 enum dma_data_direction dir, unsigned long attrs)
+
+	void
+	dma_unmap_resource(struct device *dev, dma_addr_t addr, size_t size,
+			   enum dma_data_direction dir, unsigned long attrs)
+
+API for mapping and unmapping for MMIO resources. All the notes and
+warnings for the other mapping APIs apply here. The API should only be
+used to map device MMIO resources, mapping of RAM is not permitted.
+
+::
+
+	int
+	dma_mapping_error(struct device *dev, dma_addr_t dma_addr)
+
+In some circumstances dma_map_single(), dma_map_page() and dma_map_resource()
+will fail to create a mapping. A driver can check for these errors by testing
+the returned DMA address with dma_mapping_error(). A non-zero return value
+means the mapping could not be created and the driver should take appropriate
+action (e.g. reduce current DMA mapping usage or delay and try again later).
+
+::
+
+	int
+	dma_map_sg(struct device *dev, struct scatterlist *sg,
+		   int nents, enum dma_data_direction direction)
+
+Returns: the number of DMA address segments mapped (this may be shorter
+than <nents> passed in if some elements of the scatter/gather list are
+physically or virtually adjacent and an IOMMU maps them with a single
+entry).
+
+Please note that the sg cannot be mapped again if it has been mapped once.
+The mapping process is allowed to destroy information in the sg.
+
+As with the other mapping interfaces, dma_map_sg() can fail. When it
+does, 0 is returned and a driver must take appropriate action. It is
+critical that the driver do something, in the case of a block driver
+aborting the request or even oopsing is better than doing nothing and
+corrupting the filesystem.
+
+With scatterlists, you use the resulting mapping like this::
+
+	int i, count = dma_map_sg(dev, sglist, nents, direction);
+	struct scatterlist *sg;
+
+	for_each_sg(sglist, sg, count, i) {
+		hw_address[i] = sg_dma_address(sg);
+		hw_len[i] = sg_dma_len(sg);
+	}
+
+where nents is the number of entries in the sglist.
+
+The implementation is free to merge several consecutive sglist entries
+into one (e.g. with an IOMMU, or if several pages just happen to be
+physically contiguous) and returns the actual number of sg entries it
+mapped them to. On failure 0, is returned.
+
+Then you should loop count times (note: this can be less than nents times)
+and use sg_dma_address() and sg_dma_len() macros where you previously
+accessed sg->address and sg->length as shown above.
+
+::
+
+	void
+	dma_unmap_sg(struct device *dev, struct scatterlist *sg,
+		     int nents, enum dma_data_direction direction)
+
+Unmap the previously mapped scatter/gather list.  All the parameters
+must be the same as those and passed in to the scatter/gather mapping
+API.
+
+Note: <nents> must be the number you passed in, *not* the number of
+DMA address entries returned.
+
+::
+
+	void
+	dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
+				size_t size,
+				enum dma_data_direction direction)
+
+	void
+	dma_sync_single_for_device(struct device *dev, dma_addr_t dma_handle,
+				   size_t size,
+				   enum dma_data_direction direction)
+
+	void
+	dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg,
+			    int nents,
+			    enum dma_data_direction direction)
+
+	void
+	dma_sync_sg_for_device(struct device *dev, struct scatterlist *sg,
+			       int nents,
+			       enum dma_data_direction direction)
+
+Synchronise a single contiguous or scatter/gather mapping for the CPU
+and device. With the sync_sg API, all the parameters must be the same
+as those passed into the single mapping API. With the sync_single API,
+you can use dma_handle and size parameters that aren't identical to
+those passed into the single mapping API to do a partial sync.
+
+
+.. note::
+
+   You must do this:
+
+   - Before reading values that have been written by DMA from the device
+     (use the DMA_FROM_DEVICE direction)
+   - After writing values that will be written to the device using DMA
+     (use the DMA_TO_DEVICE) direction
+   - before *and* after handing memory to the device if the memory is
+     DMA_BIDIRECTIONAL
+
+See also dma_map_single().
+
+::
+
+	dma_addr_t
+	dma_map_single_attrs(struct device *dev, void *cpu_addr, size_t size,
+			     enum dma_data_direction dir,
+			     unsigned long attrs)
+
+	void
+	dma_unmap_single_attrs(struct device *dev, dma_addr_t dma_addr,
+			       size_t size, enum dma_data_direction dir,
+			       unsigned long attrs)
+
+	int
+	dma_map_sg_attrs(struct device *dev, struct scatterlist *sgl,
+			 int nents, enum dma_data_direction dir,
+			 unsigned long attrs)
+
+	void
+	dma_unmap_sg_attrs(struct device *dev, struct scatterlist *sgl,
+			   int nents, enum dma_data_direction dir,
+			   unsigned long attrs)
+
+The four functions above are just like the counterpart functions
+without the _attrs suffixes, except that they pass an optional
+dma_attrs.
+
+The interpretation of DMA attributes is architecture-specific, and
+each attribute should be documented in Documentation/DMA-attributes.txt.
+
+If dma_attrs are 0, the semantics of each of these functions
+is identical to those of the corresponding function
+without the _attrs suffix. As a result dma_map_single_attrs()
+can generally replace dma_map_single(), etc.
+
+As an example of the use of the ``*_attrs`` functions, here's how
+you could pass an attribute DMA_ATTR_FOO when mapping memory
+for DMA::
+
+	#include <linux/dma-mapping.h>
+	/* DMA_ATTR_FOO should be defined in linux/dma-mapping.h and
+	* documented in Documentation/DMA-attributes.txt */
+	...
+
+		unsigned long attr;
+		attr |= DMA_ATTR_FOO;
+		....
+		n = dma_map_sg_attrs(dev, sg, nents, DMA_TO_DEVICE, attr);
+		....
+
+Architectures that care about DMA_ATTR_FOO would check for its
+presence in their implementations of the mapping and unmapping
+routines, e.g.:::
+
+	void whizco_dma_map_sg_attrs(struct device *dev, dma_addr_t dma_addr,
+				     size_t size, enum dma_data_direction dir,
+				     unsigned long attrs)
+	{
+		....
+		if (attrs & DMA_ATTR_FOO)
+			/* twizzle the frobnozzle */
+		....
+	}
+
+
+Part II - Advanced dma usage
+----------------------------
+
+Warning: These pieces of the DMA API should not be used in the
+majority of cases, since they cater for unlikely corner cases that
+don't belong in usual drivers.
+
+If you don't understand how cache line coherency works between a
+processor and an I/O device, you should not be using this part of the
+API at all.
+
+::
+
+	void *
+	dma_alloc_attrs(struct device *dev, size_t size, dma_addr_t *dma_handle,
+			gfp_t flag, unsigned long attrs)
+
+Identical to dma_alloc_coherent() except that when the
+DMA_ATTR_NON_CONSISTENT flags is passed in the attrs argument, the
+platform will choose to return either consistent or non-consistent memory
+as it sees fit.  By using this API, you are guaranteeing to the platform
+that you have all the correct and necessary sync points for this memory
+in the driver should it choose to return non-consistent memory.
+
+Note: where the platform can return consistent memory, it will
+guarantee that the sync points become nops.
+
+Warning:  Handling non-consistent memory is a real pain.  You should
+only use this API if you positively know your driver will be
+required to work on one of the rare (usually non-PCI) architectures
+that simply cannot make consistent memory.
+
+::
+
+	void
+	dma_free_attrs(struct device *dev, size_t size, void *cpu_addr,
+		       dma_addr_t dma_handle, unsigned long attrs)
+
+Free memory allocated by the dma_alloc_attrs().  All common
+parameters must be identical to those otherwise passed to dma_free_coherent,
+and the attrs argument must be identical to the attrs passed to
+dma_alloc_attrs().
+
+::
+
+	int
+	dma_get_cache_alignment(void)
+
+Returns the processor cache alignment.  This is the absolute minimum
+alignment *and* width that you must observe when either mapping
+memory or doing partial flushes.
+
+.. note::
+
+	This API may return a number *larger* than the actual cache
+	line, but it will guarantee that one or more cache lines fit exactly
+	into the width returned by this call.  It will also always be a power
+	of two for easy alignment.
+
+::
+
+	void
+	dma_cache_sync(struct device *dev, void *vaddr, size_t size,
+		       enum dma_data_direction direction)
+
+Do a partial sync of memory that was allocated by dma_alloc_attrs() with
+the DMA_ATTR_NON_CONSISTENT flag starting at virtual address vaddr and
+continuing on for size.  Again, you *must* observe the cache line
+boundaries when doing this.
+
+::
+
+	int
+	dma_declare_coherent_memory(struct device *dev, phys_addr_t phys_addr,
+				    dma_addr_t device_addr, size_t size);
+
+Declare region of memory to be handed out by dma_alloc_coherent() when
+it's asked for coherent memory for this device.
+
+phys_addr is the CPU physical address to which the memory is currently
+assigned (this will be ioremapped so the CPU can access the region).
+
+device_addr is the DMA address the device needs to be programmed
+with to actually address this memory (this will be handed out as the
+dma_addr_t in dma_alloc_coherent()).
+
+size is the size of the area (must be multiples of PAGE_SIZE).
+
+As a simplification for the platforms, only *one* such region of
+memory may be declared per device.
+
+For reasons of efficiency, most platforms choose to track the declared
+region only at the granularity of a page.  For smaller allocations,
+you should use the dma_pool() API.
+
+Part III - Debug drivers use of the DMA-API
+-------------------------------------------
+
+The DMA-API as described above has some constraints. DMA addresses must be
+released with the corresponding function with the same size for example. With
+the advent of hardware IOMMUs it becomes more and more important that drivers
+do not violate those constraints. In the worst case such a violation can
+result in data corruption up to destroyed filesystems.
+
+To debug drivers and find bugs in the usage of the DMA-API checking code can
+be compiled into the kernel which will tell the developer about those
+violations. If your architecture supports it you can select the "Enable
+debugging of DMA-API usage" option in your kernel configuration. Enabling this
+option has a performance impact. Do not enable it in production kernels.
+
+If you boot the resulting kernel will contain code which does some bookkeeping
+about what DMA memory was allocated for which device. If this code detects an
+error it prints a warning message with some details into your kernel log. An
+example warning message may look like this::
+
+	WARNING: at /data2/repos/linux-2.6-iommu/lib/dma-debug.c:448
+		check_unmap+0x203/0x490()
+	Hardware name:
+	forcedeth 0000:00:08.0: DMA-API: device driver frees DMA memory with wrong
+		function [device address=0x00000000640444be] [size=66 bytes] [mapped as
+	single] [unmapped as page]
+	Modules linked in: nfsd exportfs bridge stp llc r8169
+	Pid: 0, comm: swapper Tainted: G        W  2.6.28-dmatest-09289-g8bb99c0 #1
+	Call Trace:
+	<IRQ>  [<ffffffff80240b22>] warn_slowpath+0xf2/0x130
+	[<ffffffff80647b70>] _spin_unlock+0x10/0x30
+	[<ffffffff80537e75>] usb_hcd_link_urb_to_ep+0x75/0xc0
+	[<ffffffff80647c22>] _spin_unlock_irqrestore+0x12/0x40
+	[<ffffffff8055347f>] ohci_urb_enqueue+0x19f/0x7c0
+	[<ffffffff80252f96>] queue_work+0x56/0x60
+	[<ffffffff80237e10>] enqueue_task_fair+0x20/0x50
+	[<ffffffff80539279>] usb_hcd_submit_urb+0x379/0xbc0
+	[<ffffffff803b78c3>] cpumask_next_and+0x23/0x40
+	[<ffffffff80235177>] find_busiest_group+0x207/0x8a0
+	[<ffffffff8064784f>] _spin_lock_irqsave+0x1f/0x50
+	[<ffffffff803c7ea3>] check_unmap+0x203/0x490
+	[<ffffffff803c8259>] debug_dma_unmap_page+0x49/0x50
+	[<ffffffff80485f26>] nv_tx_done_optimized+0xc6/0x2c0
+	[<ffffffff80486c13>] nv_nic_irq_optimized+0x73/0x2b0
+	[<ffffffff8026df84>] handle_IRQ_event+0x34/0x70
+	[<ffffffff8026ffe9>] handle_edge_irq+0xc9/0x150
+	[<ffffffff8020e3ab>] do_IRQ+0xcb/0x1c0
+	[<ffffffff8020c093>] ret_from_intr+0x0/0xa
+	<EOI> <4>---[ end trace f6435a98e2a38c0e ]---
+
+The driver developer can find the driver and the device including a stacktrace
+of the DMA-API call which caused this warning.
+
+Per default only the first error will result in a warning message. All other
+errors will only silently counted. This limitation exist to prevent the code
+from flooding your kernel log. To support debugging a device driver this can
+be disabled via debugfs. See the debugfs interface documentation below for
+details.
+
+The debugfs directory for the DMA-API debugging code is called dma-api/. In
+this directory the following files can currently be found:
+
+=============================== ===============================================
+dma-api/all_errors		This file contains a numeric value. If this
+				value is not equal to zero the debugging code
+				will print a warning for every error it finds
+				into the kernel log. Be careful with this
+				option, as it can easily flood your logs.
+
+dma-api/disabled		This read-only file contains the character 'Y'
+				if the debugging code is disabled. This can
+				happen when it runs out of memory or if it was
+				disabled at boot time
+
+dma-api/dump			This read-only file contains current DMA
+				mappings.
+
+dma-api/error_count		This file is read-only and shows the total
+				numbers of errors found.
+
+dma-api/num_errors		The number in this file shows how many
+				warnings will be printed to the kernel log
+				before it stops. This number is initialized to
+				one at system boot and be set by writing into
+				this file
+
+dma-api/min_free_entries	This read-only file can be read to get the
+				minimum number of free dma_debug_entries the
+				allocator has ever seen. If this value goes
+				down to zero the code will attempt to increase
+				nr_total_entries to compensate.
+
+dma-api/num_free_entries	The current number of free dma_debug_entries
+				in the allocator.
+
+dma-api/nr_total_entries	The total number of dma_debug_entries in the
+				allocator, both free and used.
+
+dma-api/driver_filter		You can write a name of a driver into this file
+				to limit the debug output to requests from that
+				particular driver. Write an empty string to
+				that file to disable the filter and see
+				all errors again.
+=============================== ===============================================
+
+If you have this code compiled into your kernel it will be enabled by default.
+If you want to boot without the bookkeeping anyway you can provide
+'dma_debug=off' as a boot parameter. This will disable DMA-API debugging.
+Notice that you can not enable it again at runtime. You have to reboot to do
+so.
+
+If you want to see debug messages only for a special device driver you can
+specify the dma_debug_driver=<drivername> parameter. This will enable the
+driver filter at boot time. The debug code will only print errors for that
+driver afterwards. This filter can be disabled or changed later using debugfs.
+
+When the code disables itself at runtime this is most likely because it ran
+out of dma_debug_entries and was unable to allocate more on-demand. 65536
+entries are preallocated at boot - if this is too low for you boot with
+'dma_debug_entries=<your_desired_number>' to overwrite the default. Note
+that the code allocates entries in batches, so the exact number of
+preallocated entries may be greater than the actual number requested. The
+code will print to the kernel log each time it has dynamically allocated
+as many entries as were initially preallocated. This is to indicate that a
+larger preallocation size may be appropriate, or if it happens continually
+that a driver may be leaking mappings.
+
+::
+
+	void
+	debug_dma_mapping_error(struct device *dev, dma_addr_t dma_addr);
+
+dma-debug interface debug_dma_mapping_error() to debug drivers that fail
+to check DMA mapping errors on addresses returned by dma_map_single() and
+dma_map_page() interfaces. This interface clears a flag set by
+debug_dma_map_page() to indicate that dma_mapping_error() has been called by
+the driver. When driver does unmap, debug_dma_unmap() checks the flag and if
+this flag is still set, prints warning message that includes call trace that
+leads up to the unmap. This interface can be called from dma_mapping_error()
+routines to enable DMA mapping error check debugging.
diff --git a/Documentation/core-api/dma-attributes.rst b/Documentation/core-api/dma-attributes.rst
new file mode 100644
index 000000000000..29dcbe8826e8
--- /dev/null
+++ b/Documentation/core-api/dma-attributes.rst
@@ -0,0 +1,140 @@
+==============
+DMA attributes
+==============
+
+This document describes the semantics of the DMA attributes that are
+defined in linux/dma-mapping.h.
+
+DMA_ATTR_WEAK_ORDERING
+----------------------
+
+DMA_ATTR_WEAK_ORDERING specifies that reads and writes to the mapping
+may be weakly ordered, that is that reads and writes may pass each other.
+
+Since it is optional for platforms to implement DMA_ATTR_WEAK_ORDERING,
+those that do not will simply ignore the attribute and exhibit default
+behavior.
+
+DMA_ATTR_WRITE_COMBINE
+----------------------
+
+DMA_ATTR_WRITE_COMBINE specifies that writes to the mapping may be
+buffered to improve performance.
+
+Since it is optional for platforms to implement DMA_ATTR_WRITE_COMBINE,
+those that do not will simply ignore the attribute and exhibit default
+behavior.
+
+DMA_ATTR_NON_CONSISTENT
+-----------------------
+
+DMA_ATTR_NON_CONSISTENT lets the platform to choose to return either
+consistent or non-consistent memory as it sees fit.  By using this API,
+you are guaranteeing to the platform that you have all the correct and
+necessary sync points for this memory in the driver.
+
+DMA_ATTR_NO_KERNEL_MAPPING
+--------------------------
+
+DMA_ATTR_NO_KERNEL_MAPPING lets the platform to avoid creating a kernel
+virtual mapping for the allocated buffer. On some architectures creating
+such mapping is non-trivial task and consumes very limited resources
+(like kernel virtual address space or dma consistent address space).
+Buffers allocated with this attribute can be only passed to user space
+by calling dma_mmap_attrs(). By using this API, you are guaranteeing
+that you won't dereference the pointer returned by dma_alloc_attr(). You
+can treat it as a cookie that must be passed to dma_mmap_attrs() and
+dma_free_attrs(). Make sure that both of these also get this attribute
+set on each call.
+
+Since it is optional for platforms to implement
+DMA_ATTR_NO_KERNEL_MAPPING, those that do not will simply ignore the
+attribute and exhibit default behavior.
+
+DMA_ATTR_SKIP_CPU_SYNC
+----------------------
+
+By default dma_map_{single,page,sg} functions family transfer a given
+buffer from CPU domain to device domain. Some advanced use cases might
+require sharing a buffer between more than one device. This requires
+having a mapping created separately for each device and is usually
+performed by calling dma_map_{single,page,sg} function more than once
+for the given buffer with device pointer to each device taking part in
+the buffer sharing. The first call transfers a buffer from 'CPU' domain
+to 'device' domain, what synchronizes CPU caches for the given region
+(usually it means that the cache has been flushed or invalidated
+depending on the dma direction). However, next calls to
+dma_map_{single,page,sg}() for other devices will perform exactly the
+same synchronization operation on the CPU cache. CPU cache synchronization
+might be a time consuming operation, especially if the buffers are
+large, so it is highly recommended to avoid it if possible.
+DMA_ATTR_SKIP_CPU_SYNC allows platform code to skip synchronization of
+the CPU cache for the given buffer assuming that it has been already
+transferred to 'device' domain. This attribute can be also used for
+dma_unmap_{single,page,sg} functions family to force buffer to stay in
+device domain after releasing a mapping for it. Use this attribute with
+care!
+
+DMA_ATTR_FORCE_CONTIGUOUS
+-------------------------
+
+By default DMA-mapping subsystem is allowed to assemble the buffer
+allocated by dma_alloc_attrs() function from individual pages if it can
+be mapped as contiguous chunk into device dma address space. By
+specifying this attribute the allocated buffer is forced to be contiguous
+also in physical memory.
+
+DMA_ATTR_ALLOC_SINGLE_PAGES
+---------------------------
+
+This is a hint to the DMA-mapping subsystem that it's probably not worth
+the time to try to allocate memory to in a way that gives better TLB
+efficiency (AKA it's not worth trying to build the mapping out of larger
+pages).  You might want to specify this if:
+
+- You know that the accesses to this memory won't thrash the TLB.
+  You might know that the accesses are likely to be sequential or
+  that they aren't sequential but it's unlikely you'll ping-pong
+  between many addresses that are likely to be in different physical
+  pages.
+- You know that the penalty of TLB misses while accessing the
+  memory will be small enough to be inconsequential.  If you are
+  doing a heavy operation like decryption or decompression this
+  might be the case.
+- You know that the DMA mapping is fairly transitory.  If you expect
+  the mapping to have a short lifetime then it may be worth it to
+  optimize allocation (avoid coming up with large pages) instead of
+  getting the slight performance win of larger pages.
+
+Setting this hint doesn't guarantee that you won't get huge pages, but it
+means that we won't try quite as hard to get them.
+
+.. note:: At the moment DMA_ATTR_ALLOC_SINGLE_PAGES is only implemented on ARM,
+	  though ARM64 patches will likely be posted soon.
+
+DMA_ATTR_NO_WARN
+----------------
+
+This tells the DMA-mapping subsystem to suppress allocation failure reports
+(similarly to __GFP_NOWARN).
+
+On some architectures allocation failures are reported with error messages
+to the system logs.  Although this can help to identify and debug problems,
+drivers which handle failures (eg, retry later) have no problems with them,
+and can actually flood the system logs with error messages that aren't any
+problem at all, depending on the implementation of the retry mechanism.
+
+So, this provides a way for drivers to avoid those error messages on calls
+where allocation failures are not a problem, and shouldn't bother the logs.
+
+.. note:: At the moment DMA_ATTR_NO_WARN is only implemented on PowerPC.
+
+DMA_ATTR_PRIVILEGED
+-------------------
+
+Some advanced peripherals such as remote processors and GPUs perform
+accesses to DMA buffers in both privileged "supervisor" and unprivileged
+"user" modes.  This attribute is used to indicate to the DMA-mapping
+subsystem that the buffer is fully accessible at the elevated privilege
+level (and ideally inaccessible or at least read-only at the
+lesser-privileged levels).
diff --git a/Documentation/core-api/dma-isa-lpc.rst b/Documentation/core-api/dma-isa-lpc.rst
new file mode 100644
index 000000000000..b1ec7b16c21f
--- /dev/null
+++ b/Documentation/core-api/dma-isa-lpc.rst
@@ -0,0 +1,152 @@
+============================
+DMA with ISA and LPC devices
+============================
+
+:Author: Pierre Ossman <drzeus@drzeus.cx>
+
+This document describes how to do DMA transfers using the old ISA DMA
+controller. Even though ISA is more or less dead today the LPC bus
+uses the same DMA system so it will be around for quite some time.
+
+Headers and dependencies
+------------------------
+
+To do ISA style DMA you need to include two headers::
+
+	#include <linux/dma-mapping.h>
+	#include <asm/dma.h>
+
+The first is the generic DMA API used to convert virtual addresses to
+bus addresses (see Documentation/DMA-API.txt for details).
+
+The second contains the routines specific to ISA DMA transfers. Since
+this is not present on all platforms make sure you construct your
+Kconfig to be dependent on ISA_DMA_API (not ISA) so that nobody tries
+to build your driver on unsupported platforms.
+
+Buffer allocation
+-----------------
+
+The ISA DMA controller has some very strict requirements on which
+memory it can access so extra care must be taken when allocating
+buffers.
+
+(You usually need a special buffer for DMA transfers instead of
+transferring directly to and from your normal data structures.)
+
+The DMA-able address space is the lowest 16 MB of _physical_ memory.
+Also the transfer block may not cross page boundaries (which are 64
+or 128 KiB depending on which channel you use).
+
+In order to allocate a piece of memory that satisfies all these
+requirements you pass the flag GFP_DMA to kmalloc.
+
+Unfortunately the memory available for ISA DMA is scarce so unless you
+allocate the memory during boot-up it's a good idea to also pass
+__GFP_RETRY_MAYFAIL and __GFP_NOWARN to make the allocator try a bit harder.
+
+(This scarcity also means that you should allocate the buffer as
+early as possible and not release it until the driver is unloaded.)
+
+Address translation
+-------------------
+
+To translate the virtual address to a bus address, use the normal DMA
+API. Do _not_ use isa_virt_to_bus() even though it does the same
+thing. The reason for this is that the function isa_virt_to_bus()
+will require a Kconfig dependency to ISA, not just ISA_DMA_API which
+is really all you need. Remember that even though the DMA controller
+has its origins in ISA it is used elsewhere.
+
+Note: x86_64 had a broken DMA API when it came to ISA but has since
+been fixed. If your arch has problems then fix the DMA API instead of
+reverting to the ISA functions.
+
+Channels
+--------
+
+A normal ISA DMA controller has 8 channels. The lower four are for
+8-bit transfers and the upper four are for 16-bit transfers.
+
+(Actually the DMA controller is really two separate controllers where
+channel 4 is used to give DMA access for the second controller (0-3).
+This means that of the four 16-bits channels only three are usable.)
+
+You allocate these in a similar fashion as all basic resources:
+
+extern int request_dma(unsigned int dmanr, const char * device_id);
+extern void free_dma(unsigned int dmanr);
+
+The ability to use 16-bit or 8-bit transfers is _not_ up to you as a
+driver author but depends on what the hardware supports. Check your
+specs or test different channels.
+
+Transfer data
+-------------
+
+Now for the good stuff, the actual DMA transfer. :)
+
+Before you use any ISA DMA routines you need to claim the DMA lock
+using claim_dma_lock(). The reason is that some DMA operations are
+not atomic so only one driver may fiddle with the registers at a
+time.
+
+The first time you use the DMA controller you should call
+clear_dma_ff(). This clears an internal register in the DMA
+controller that is used for the non-atomic operations. As long as you
+(and everyone else) uses the locking functions then you only need to
+reset this once.
+
+Next, you tell the controller in which direction you intend to do the
+transfer using set_dma_mode(). Currently you have the options
+DMA_MODE_READ and DMA_MODE_WRITE.
+
+Set the address from where the transfer should start (this needs to
+be 16-bit aligned for 16-bit transfers) and how many bytes to
+transfer. Note that it's _bytes_. The DMA routines will do all the
+required translation to values that the DMA controller understands.
+
+The final step is enabling the DMA channel and releasing the DMA
+lock.
+
+Once the DMA transfer is finished (or timed out) you should disable
+the channel again. You should also check get_dma_residue() to make
+sure that all data has been transferred.
+
+Example::
+
+	int flags, residue;
+
+	flags = claim_dma_lock();
+
+	clear_dma_ff();
+
+	set_dma_mode(channel, DMA_MODE_WRITE);
+	set_dma_addr(channel, phys_addr);
+	set_dma_count(channel, num_bytes);
+
+	dma_enable(channel);
+
+	release_dma_lock(flags);
+
+	while (!device_done());
+
+	flags = claim_dma_lock();
+
+	dma_disable(channel);
+
+	residue = dma_get_residue(channel);
+	if (residue != 0)
+		printk(KERN_ERR "driver: Incomplete DMA transfer!"
+			" %d bytes left!\n", residue);
+
+	release_dma_lock(flags);
+
+Suspend/resume
+--------------
+
+It is the driver's responsibility to make sure that the machine isn't
+suspended while a DMA transfer is in progress. Also, all DMA settings
+are lost when the system suspends so if your driver relies on the DMA
+controller being in a certain state then you have to restore these
+registers upon resume.
diff --git a/Documentation/core-api/index.rst b/Documentation/core-api/index.rst
index b29c4a07beda..c00aef843341 100644
--- a/Documentation/core-api/index.rst
+++ b/Documentation/core-api/index.rst
@@ -80,6 +80,10 @@ more memory-management documentation in :doc:`/vm/index`.
    :maxdepth: 1
 
    memory-allocation
+   dma-api
+   dma-api-howto
+   dma-attributes
+   dma-isa-lpc
    mm-api
    genalloc
    pin_user_pages