Merge tag 'imx-dt-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Pull "The i.MX device tree changes for 3.19" from Shawn Guo:

 - Device additions for board vf610-colibri, pwm, backlight, I2C, RTC,
   ADC etc.
 - Update i.MX6 phyFLEX board to include PCIe, CAN and audio support
 - Improve SSI clocks description for i.MX5 platforms
 - Add ENET2 support for imx6sx-sdb board
 - Add device tree source for LS1021A SoC, board QDS and TWR
 - Enable cpufreq support for i.MX53
 - Enable VPU device support for i.MX6QDL
 - Enable poweroff support for i.MX6 SoCs
 - Add support for TBS2910 Matrix ARM mini PC which is built on i.MX6Q
 - Create generic base device trees for Vybrid and add support for
   Colibri VF50

Note: the change set is built on top of imx-soc-3.19 to resolve the
dependency that  "ARM: dts: imx53: add cpufreq-dt support" uses the
clock define IMX5_CLK_ARM that is added by "ARM: imx53: clk: add ARM
clock".

* tag 'imx-dt-3.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (51 commits)
  ARM: dts: imx6q-tbs2910: Enable snvs-poweroff
  ARM: dts: imx6: add pm_power_off support for i.mx6 chips
  ARM: dts: vf-colibri: add USB regulators
  ARM: dts: imx6: phyFLEX: Add CAN support
  ARM: dts: imx6: phyFLEX: Add PCIe
  ARM: dts: imx6: phyFLEX: Set correct interrupt for pmic
  ARM: dts: imx6: phyFLEX: Enable gpmi in module file
  ARM: dts: imx6: phyFLEX: set nodes in alphabetical order
  ARM: dts: vf-colibri-eval-v3.dts: Enable ST-M41T0M6 RTC
  ARM: dts: vf-colibri: Add I2C support
  ARM: dts: imx6qdl: Enable CODA960 VPU
  ARM: dts: imx6q-tbs2910: Remove unneeded 'fsl,mode' property
  ARM: dts: vf610: enable USB misc/phy nodes where necessary
  ARM: dts: vf610: use new GPIO support
  ARM: dts: pbab01: enable I2S audio on phyFLEX-i.MX6 boards
  ARM: dts: pbab01: move i2c pins and frequency configuration into pfla02
  ARM: dts: vf500-colibri: add Colibri VF50 support
  ARM: dts: vf610: create generic base device trees
  ARM: dts: vf610: assign oscillator to clock module
  dt-bindings: arm: add Freescale LS1021A SoC device tree binding
  ...

Signed-off-by; Arnd Bergmann <arnd@arndb.de>

1 files changed, 38 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index e935d7d4ac43..4e8b7df7fc62 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -74,3 +74,41 @@ Required root node properties:
 i.MX6q generic board
 Required root node properties:
     - compatible = "fsl,imx6q";
+
+
+Freescale LS1021A Platform Device Tree Bindings
+------------------------------------------------
+
+Required root node compatible properties:
+  - compatible = "fsl,ls1021a";
+
+Freescale LS1021A SoC-specific Device Tree Bindings
+-------------------------------------------
+
+Freescale SCFG
+  SCFG is the supplemental configuration unit, that provides SoC specific
+configuration and status registers for the chip. Such as getting PEX port
+status.
+  Required properties:
+  - compatible: should be "fsl,ls1021a-scfg"
+  - reg: should contain base address and length of SCFG memory-mapped registers
+
+Example:
+	scfg: scfg@1570000 {
+		compatible = "fsl,ls1021a-scfg";
+		reg = <0x0 0x1570000 0x0 0x10000>;
+	};
+
+Freescale DCFG
+  DCFG is the device configuration unit, that provides general purpose
+configuration and status for the device. Such as setting the secondary
+core start address and release the secondary core from holdoff and startup.
+  Required properties:
+  - compatible: should be "fsl,ls1021a-dcfg"
+  - reg : should contain base address and length of DCFG memory-mapped registers
+
+Example:
+	dcfg: dcfg@1ee0000 {
+		compatible = "fsl,ls1021a-dcfg";
+		reg = <0x0 0x1ee0000 0x0 0x10000>;
+	};