Merge tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux

Pull devicetree updates from Rob Herring:
 "Bindings:

   - DT schema conversions for Samsung clocks, RNG bindings, Qcom
     Command DB and rmtfs, gpio-restart, i2c-mux-gpio, i2c-mux-pinctl,
     Tegra I2C and BPMP, pwm-vibrator, Arm DSU, and Cadence macb

   - DT schema conversions for Broadcom platforms: interrupt
     controllers, STB GPIO, STB waketimer, STB reset, iProc MDIO mux,
     iProc PCIe, Cygnus PCIe PHY, PWM, USB BDC, BCM6328 LEDs, TMON,
     SYSTEMPORT, AMAC, Northstar 2 PCIe PHY, GENET, moca PHY, GISB
     arbiter, and SATA

   - Add binding schemas for Tegra210 EMC table, TI DC-DC converters,

   - Clean-ups of MDIO bus schemas to fix 'unevaluatedProperties' issues

   - More fixes due to 'unevaluatedProperties' enabling

   - Data type fixes and clean-ups of binding examples found in
     preparation to move to validating DTB files directly (instead of
     intermediate YAML representation.

   - Vendor prefixes for T-Head Semiconductor, OnePlus, and Sunplus

   - Add various new compatible strings

  DT core:

   - Silence a warning for overlapping reserved memory regions

   - Reimplement unittest overlay tracking

   - Fix stack frame size warning in unittest

   - Clean-ups of early FDT scanning functions

   - Fix handling of "linux,usable-memory-range" on EFI booted systems

   - Add support for 'fail' status on CPU nodes

   - Improve error message in of_phandle_iterator_next()

   - kbuild: Disable duplicate unit-address warnings for disabled nodes"

* tag 'devicetree-for-5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (114 commits)
  dt-bindings: net: mdio: Drop resets/reset-names child properties
  dt-bindings: clock: samsung: convert S5Pv210 to dtschema
  dt-bindings: clock: samsung: convert Exynos5410 to dtschema
  dt-bindings: clock: samsung: convert Exynos5260 to dtschema
  dt-bindings: clock: samsung: extend Exynos7 bindings with UFS
  dt-bindings: clock: samsung: convert Exynos7 to dtschema
  dt-bindings: clock: samsung: convert Exynos5433 to dtschema
  dt-bindings: i2c: maxim,max96712: Add bindings for Maxim Integrated MAX96712
  dt-bindings: iio: adi,ltc2983: Fix 64-bit property sizes
  dt-bindings: power: maxim,max17040: Fix incorrect type for 'maxim,rcomp'
  dt-bindings: interrupt-controller: arm,gic-v3: Fix 'interrupts' cell size in example
  dt-bindings: iio/magnetometer: yamaha,yas530: Fix invalid 'interrupts' in example
  dt-bindings: clock: imx5: Drop clock consumer node from example
  dt-bindings: Drop required 'interrupt-parent'
  dt-bindings: net: ti,dp83869: Drop value on boolean 'ti,max-output-impedance'
  dt-bindings: net: wireless: mt76: Fix 8-bit property sizes
  dt-bindings: PCI: snps,dw-pcie-ep: Drop conflicting 'max-functions' schema
  dt-bindings: i2c: st,stm32-i2c: Make each example a separate entry
  dt-bindings: net: stm32-dwmac: Make each example a separate entry
  dt-bindings: net: Cleanup MDIO node schemas
  ...

11 files changed, 1324 insertions, 940 deletions

diff --git a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt b/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
deleted file mode 100644
index c79d31f7f66e..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos5260-clock.txt
+++ /dev/null
@@ -1,190 +0,0 @@
-* Samsung Exynos5260 Clock Controller
-
-Exynos5260 has 13 clock controllers which are instantiated
-independently from the device-tree. These clock controllers
-generate and supply clocks to various hardware blocks within
-the SoC.
-
-Each clock is assigned an identifier and client nodes can use
-this identifier to specify the clock which they consume. All
-available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5260-clk.h header and can be used in
-device tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It
-is expected that they are defined using standard clock bindings
-with following clock-output-names:
-
- - "fin_pll" - PLL input clock from XXTI
- - "xrtcxti" - input clock from XRTCXTI
- - "ioclk_pcm_extclk" - pcm external operation clock
- - "ioclk_spdif_extclk" - spdif external operation clock
- - "ioclk_i2s_cdclk" - i2s0 codec clock
-
-Phy clocks:
-
-There are several clocks which are generated by specific PHYs.
-These clocks are fed into the clock controller and then routed to
-the hardware blocks. These clocks are defined as fixed clocks in the
-driver with following names:
-
- - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
- - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
- - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
- - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
- - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
- - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
- - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
- - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
- - "phyclk_dptx_phy_clk_div2"
- - "phyclk_mipi_dphy_4l_m_rxclkesc0"
- - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
- - "phyclk_usbhost20_phy_freeclk"
- - "phyclk_usbhost20_phy_clk48mohci"
- - "phyclk_usbdrd30_udrd30_pipe_pclk"
- - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
-
-Required Properties for Clock Controller:
-
- - compatible: should be one of the following.
-	1) "samsung,exynos5260-clock-top"
-	2) "samsung,exynos5260-clock-peri"
-	3) "samsung,exynos5260-clock-egl"
-	4) "samsung,exynos5260-clock-kfc"
-	5) "samsung,exynos5260-clock-g2d"
-	6) "samsung,exynos5260-clock-mif"
-	7) "samsung,exynos5260-clock-mfc"
-	8) "samsung,exynos5260-clock-g3d"
-	9) "samsung,exynos5260-clock-fsys"
-	10) "samsung,exynos5260-clock-aud"
-	11) "samsung,exynos5260-clock-isp"
-	12) "samsung,exynos5260-clock-gscl"
-	13) "samsung,exynos5260-clock-disp"
-
- - reg: physical base address of the controller and the length of
-	memory mapped region.
-
- - #clock-cells: should be 1.
-
- - clocks: list of clock identifiers which are fed as the input to
-	the given clock controller. Please refer the next section to find
-	the input clocks for a given controller.
-
- - clock-names: list of names of clocks which are fed as the input
-	to the given clock controller.
-
-Input clocks for top clock controller:
-	- fin_pll
-	- dout_mem_pll
-	- dout_bus_pll
-	- dout_media_pll
-
-Input clocks for peri clock controller:
-	- fin_pll
-	- ioclk_pcm_extclk
-	- ioclk_i2s_cdclk
-	- ioclk_spdif_extclk
-	- phyclk_hdmi_phy_ref_cko
-	- dout_aclk_peri_66
-	- dout_sclk_peri_uart0
-	- dout_sclk_peri_uart1
-	- dout_sclk_peri_uart2
-	- dout_sclk_peri_spi0_b
-	- dout_sclk_peri_spi1_b
-	- dout_sclk_peri_spi2_b
-	- dout_aclk_peri_aud
-	- dout_sclk_peri_spi0_b
-
-Input clocks for egl clock controller:
-	- fin_pll
-	- dout_bus_pll
-
-Input clocks for kfc clock controller:
-	- fin_pll
-	- dout_media_pll
-
-Input clocks for g2d clock controller:
-	- fin_pll
-	- dout_aclk_g2d_333
-
-Input clocks for mif clock controller:
-	- fin_pll
-
-Input clocks for mfc clock controller:
-	- fin_pll
-	- dout_aclk_mfc_333
-
-Input clocks for g3d clock controller:
-	- fin_pll
-
-Input clocks for fsys clock controller:
-	- fin_pll
-	- phyclk_usbhost20_phy_phyclock
-	- phyclk_usbhost20_phy_freeclk
-	- phyclk_usbhost20_phy_clk48mohci
-	- phyclk_usbdrd30_udrd30_pipe_pclk
-	- phyclk_usbdrd30_udrd30_phyclock
-	- dout_aclk_fsys_200
-
-Input clocks for aud clock controller:
-	- fin_pll
-	- fout_aud_pll
-	- ioclk_i2s_cdclk
-	- ioclk_pcm_extclk
-
-Input clocks for isp clock controller:
-	- fin_pll
-	- dout_aclk_isp1_266
-	- dout_aclk_isp1_400
-	- mout_aclk_isp1_266
-
-Input clocks for gscl clock controller:
-	- fin_pll
-	- dout_aclk_gscl_400
-	- dout_aclk_gscl_333
-
-Input clocks for disp clock controller:
-	- fin_pll
-	- phyclk_dptx_phy_ch3_txd_clk
-	- phyclk_dptx_phy_ch2_txd_clk
-	- phyclk_dptx_phy_ch1_txd_clk
-	- phyclk_dptx_phy_ch0_txd_clk
-	- phyclk_hdmi_phy_tmds_clko
-	- phyclk_hdmi_phy_ref_clko
-	- phyclk_hdmi_phy_pixel_clko
-	- phyclk_hdmi_link_o_tmds_clkhi
-	- phyclk_mipi_dphy_4l_m_txbyte_clkhs
-	- phyclk_dptx_phy_o_ref_clk_24m
-	- phyclk_dptx_phy_clk_div2
-	- phyclk_mipi_dphy_4l_m_rxclkesc0
-	- phyclk_hdmi_phy_ref_cko
-	- ioclk_spdif_extclk
-	- dout_aclk_peri_aud
-	- dout_aclk_disp_222
-	- dout_sclk_disp_pixel
-	- dout_aclk_disp_333
-
-Example 1: An example of a clock controller node is listed below.
-
-	clock_mfc: clock-controller@11090000 {
-		compatible = "samsung,exynos5260-clock-mfc";
-		clock = <&fin_pll>, <&clock_top TOP_DOUT_ACLK_MFC_333>;
-		clock-names = "fin_pll", "dout_aclk_mfc_333";
-		reg = <0x11090000 0x10000>;
-		#clock-cells = <1>;
-	};
-
-Example 2: UART controller node that consumes the clock generated by the
-		peri clock controller. Refer to the standard clock bindings for
-		information about 'clocks' and 'clock-names' property.
-
-	serial@12c00000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 146 0>;
-		clocks = <&clock_peri PERI_PCLK_UART0>, <&clock_peri PERI_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
-
diff --git a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt b/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
deleted file mode 100644
index 217beb27c30e..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos5410-clock.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-* Samsung Exynos5410 Clock Controller
-
-The Exynos5410 clock controller generates and supplies clock to various
-controllers within the Exynos5410 SoC.
-
-Required Properties:
-
-- compatible: should be "samsung,exynos5410-clock"
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-- clocks: should contain an entry specifying the root clock from external
-  oscillator supplied through XXTI or XusbXTI pin.  This clock should be
-  defined using standard clock bindings with "fin_pll" clock-output-name.
-  That clock is being passed internally to the 9 PLLs.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5410.h header and can be used in device
-tree sources.
-
-Example 1: An example of a clock controller node is listed below.
-
-	fin_pll: xxti {
-		compatible = "fixed-clock";
-		clock-frequency = <24000000>;
-		clock-output-names = "fin_pll";
-		#clock-cells = <0>;
-	};
-
-	clock: clock-controller@10010000 {
-		compatible = "samsung,exynos5410-clock";
-		reg = <0x10010000 0x30000>;
-		#clock-cells = <1>;
-		clocks = <&fin_pll>;
-	};
-
-Example 2: UART controller node that consumes the clock generated by the clock
-	   controller. Refer to the standard clock bindings for information
-	   about 'clocks' and 'clock-names' property.
-
-	serial@12c20000 {
-		compatible = "samsung,exynos4210-uart";
-		reg = <0x12C00000 0x100>;
-		interrupts = <0 51 0>;
-		clocks = <&clock CLK_UART0>, <&clock CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-	};
diff --git a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt b/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
deleted file mode 100644
index 183c327a7d6b..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos5433-clock.txt
+++ /dev/null
@@ -1,507 +0,0 @@
-* Samsung Exynos5433 CMU (Clock Management Units)
-
-The Exynos5433 clock controller generates and supplies clock to various
-controllers within the Exynos5433 SoC.
-
-Required Properties:
-
-- compatible: should be one of the following.
-  - "samsung,exynos5433-cmu-top"   - clock controller compatible for CMU_TOP
-    which generates clocks for IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS
-    domains and bus clocks.
-  - "samsung,exynos5433-cmu-cpif"  - clock controller compatible for CMU_CPIF
-    which generates clocks for LLI (Low Latency Interface) IP.
-  - "samsung,exynos5433-cmu-mif"   - clock controller compatible for CMU_MIF
-    which generates clocks for DRAM Memory Controller domain.
-  - "samsung,exynos5433-cmu-peric" - clock controller compatible for CMU_PERIC
-    which generates clocks for UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs.
-  - "samsung,exynos5433-cmu-peris" - clock controller compatible for CMU_PERIS
-    which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs.
-  - "samsung,exynos5433-cmu-fsys"  - clock controller compatible for CMU_FSYS
-    which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs.
-  - "samsung,exynos5433-cmu-g2d"   - clock controller compatible for CMU_G2D
-    which generates clocks for G2D/MDMA IPs.
-  - "samsung,exynos5433-cmu-disp"  - clock controller compatible for CMU_DISP
-    which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs.
-  - "samsung,exynos5433-cmu-aud"   - clock controller compatible for CMU_AUD
-    which generates clocks for Cortex-A5/BUS/AUDIO clocks.
-  - "samsung,exynos5433-cmu-bus0", "samsung,exynos5433-cmu-bus1"
-    and "samsung,exynos5433-cmu-bus2" - clock controller compatible for CMU_BUS
-    which generates global data buses clock and global peripheral buses clock.
-  - "samsung,exynos5433-cmu-g3d"  - clock controller compatible for CMU_G3D
-    which generates clocks for 3D Graphics Engine IP.
-  - "samsung,exynos5433-cmu-gscl"  - clock controller compatible for CMU_GSCL
-    which generates clocks for GSCALER IPs.
-  - "samsung,exynos5433-cmu-apollo"- clock controller compatible for CMU_APOLLO
-    which generates clocks for Cortex-A53 Quad-core processor.
-  - "samsung,exynos5433-cmu-atlas" - clock controller compatible for CMU_ATLAS
-    which generates clocks for Cortex-A57 Quad-core processor, CoreSight and
-    L2 cache controller.
-  - "samsung,exynos5433-cmu-mscl" - clock controller compatible for CMU_MSCL
-    which generates clocks for M2M (Memory to Memory) scaler and JPEG IPs.
-  - "samsung,exynos5433-cmu-mfc"  - clock controller compatible for CMU_MFC
-    which generates clocks for MFC(Multi-Format Codec) IP.
-  - "samsung,exynos5433-cmu-hevc" - clock controller compatible for CMU_HEVC
-    which generates clocks for HEVC(High Efficiency Video Codec) decoder IP.
-  - "samsung,exynos5433-cmu-isp" - clock controller compatible for CMU_ISP
-    which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs.
-  - "samsung,exynos5433-cmu-cam0" - clock controller compatible for CMU_CAM0
-    which generates clocks for MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1}
-    IPs.
-  - "samsung,exynos5433-cmu-cam1" - clock controller compatible for CMU_CAM1
-    which generates clocks for Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs.
-  - "samsung,exynos5433-cmu-imem"   - clock controller compatible for CMU_IMEM
-    which generates clocks for SSS (Security SubSystem) and SlimSSS IPs.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-- clocks: list of the clock controller input clock identifiers,
-	from common clock bindings. Please refer the next section
-	to find the input clocks for a given controller.
-
-- clock-names: list of the clock controller input clock names,
-	as described in clock-bindings.txt.
-
-	Input clocks for top clock controller:
-		- oscclk
-		- sclk_mphy_pll
-		- sclk_mfc_pll
-		- sclk_bus_pll
-
-	Input clocks for cpif clock controller:
-		- oscclk
-
-	Input clocks for mif clock controller:
-		- oscclk
-		- sclk_mphy_pll
-
-	Input clocks for fsys clock controller:
-		- oscclk
-		- sclk_ufs_mphy
-		- aclk_fsys_200
-		- sclk_pcie_100_fsys
-		- sclk_ufsunipro_fsys
-		- sclk_mmc2_fsys
-		- sclk_mmc1_fsys
-		- sclk_mmc0_fsys
-		- sclk_usbhost30_fsys
-		- sclk_usbdrd30_fsys
-
-	Input clocks for g2d clock controller:
-		- oscclk
-		- aclk_g2d_266
-		- aclk_g2d_400
-
-	Input clocks for disp clock controller:
-		- oscclk
-		- sclk_dsim1_disp
-		- sclk_dsim0_disp
-		- sclk_dsd_disp
-		- sclk_decon_tv_eclk_disp
-		- sclk_decon_vclk_disp
-		- sclk_decon_eclk_disp
-		- sclk_decon_tv_vclk_disp
-		- aclk_disp_333
-
-	Input clocks for audio clock controller:
-		- oscclk
-		- fout_aud_pll
-
-	Input clocks for bus0 clock controller:
-		- aclk_bus0_400
-
-	Input clocks for bus1 clock controller:
-		- aclk_bus1_400
-
-	Input clocks for bus2 clock controller:
-		- oscclk
-		- aclk_bus2_400
-
-	Input clocks for g3d clock controller:
-		- oscclk
-		- aclk_g3d_400
-
-	Input clocks for gscl clock controller:
-		- oscclk
-		- aclk_gscl_111
-		- aclk_gscl_333
-
-	Input clocks for apollo clock controller:
-		- oscclk
-		- sclk_bus_pll_apollo
-
-	Input clocks for atlas clock controller:
-		- oscclk
-		- sclk_bus_pll_atlas
-
-	Input clocks for mscl clock controller:
-		- oscclk
-		- sclk_jpeg_mscl
-		- aclk_mscl_400
-
-	Input clocks for mfc clock controller:
-		- oscclk
-		- aclk_mfc_400
-
-	Input clocks for hevc clock controller:
-		- oscclk
-		- aclk_hevc_400
-
-	Input clocks for isp clock controller:
-		- oscclk
-		- aclk_isp_dis_400
-		- aclk_isp_400
-
-	Input clocks for cam0 clock controller:
-		- oscclk
-		- aclk_cam0_333
-		- aclk_cam0_400
-		- aclk_cam0_552
-
-	Input clocks for cam1 clock controller:
-		- oscclk
-		- sclk_isp_uart_cam1
-		- sclk_isp_spi1_cam1
-		- sclk_isp_spi0_cam1
-		- aclk_cam1_333
-		- aclk_cam1_400
-		- aclk_cam1_552
-
-	Input clocks for imem clock controller:
-		- oscclk
-		- aclk_imem_sssx_266
-		- aclk_imem_266
-		- aclk_imem_200
-
-Optional properties:
-  - power-domains: a phandle to respective power domain node as described by
-	generic PM domain bindings (see power/power_domain.txt for more
-	information).
-
-Each clock is assigned an identifier and client nodes can use this identifier
-to specify the clock which they consume.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos5433.h header and can be used in device
-tree sources.
-
-Example 1: Examples of 'oscclk' source clock node are listed below.
-
-	xxti: xxti {
-		compatible = "fixed-clock";
-		clock-output-names = "oscclk";
-		#clock-cells = <0>;
-	};
-
-Example 2: Examples of clock controller nodes are listed below.
-
-	cmu_top: clock-controller@10030000 {
-		compatible = "samsung,exynos5433-cmu-top";
-		reg = <0x10030000 0x0c04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_mphy_pll",
-			"sclk_mfc_pll",
-			"sclk_bus_pll";
-		clocks = <&xxti>,
-		       <&cmu_cpif CLK_SCLK_MPHY_PLL>,
-		       <&cmu_mif CLK_SCLK_MFC_PLL>,
-		       <&cmu_mif CLK_SCLK_BUS_PLL>;
-	};
-
-	cmu_cpif: clock-controller@10fc0000 {
-		compatible = "samsung,exynos5433-cmu-cpif";
-		reg = <0x10fc0000 0x0c04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk";
-		clocks = <&xxti>;
-	};
-
-	cmu_mif: clock-controller@105b0000 {
-		compatible = "samsung,exynos5433-cmu-mif";
-		reg = <0x105b0000 0x100c>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_mphy_pll";
-		clocks = <&xxti>,
-		       <&cmu_cpif CLK_SCLK_MPHY_PLL>;
-	};
-
-	cmu_peric: clock-controller@14c80000 {
-		compatible = "samsung,exynos5433-cmu-peric";
-		reg = <0x14c80000 0x0b08>;
-		#clock-cells = <1>;
-	};
-
-	cmu_peris: clock-controller@10040000 {
-		compatible = "samsung,exynos5433-cmu-peris";
-		reg = <0x10040000 0x0b20>;
-		#clock-cells = <1>;
-	};
-
-	cmu_fsys: clock-controller@156e0000 {
-		compatible = "samsung,exynos5433-cmu-fsys";
-		reg = <0x156e0000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_ufs_mphy",
-			"aclk_fsys_200",
-			"sclk_pcie_100_fsys",
-			"sclk_ufsunipro_fsys",
-			"sclk_mmc2_fsys",
-			"sclk_mmc1_fsys",
-			"sclk_mmc0_fsys",
-			"sclk_usbhost30_fsys",
-			"sclk_usbdrd30_fsys";
-		clocks = <&xxti>,
-		       <&cmu_cpif CLK_SCLK_UFS_MPHY>,
-		       <&cmu_top CLK_ACLK_FSYS_200>,
-		       <&cmu_top CLK_SCLK_PCIE_100_FSYS>,
-		       <&cmu_top CLK_SCLK_UFSUNIPRO_FSYS>,
-		       <&cmu_top CLK_SCLK_MMC2_FSYS>,
-		       <&cmu_top CLK_SCLK_MMC1_FSYS>,
-		       <&cmu_top CLK_SCLK_MMC0_FSYS>,
-		       <&cmu_top CLK_SCLK_USBHOST30_FSYS>,
-		       <&cmu_top CLK_SCLK_USBDRD30_FSYS>;
-	};
-
-	cmu_g2d: clock-controller@12460000 {
-		compatible = "samsung,exynos5433-cmu-g2d";
-		reg = <0x12460000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_g2d_266",
-			"aclk_g2d_400";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_ACLK_G2D_266>,
-		       <&cmu_top CLK_ACLK_G2D_400>;
-		power-domains = <&pd_g2d>;
-	};
-
-	cmu_disp: clock-controller@13b90000 {
-		compatible = "samsung,exynos5433-cmu-disp";
-		reg = <0x13b90000 0x0c04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_dsim1_disp",
-			"sclk_dsim0_disp",
-			"sclk_dsd_disp",
-			"sclk_decon_tv_eclk_disp",
-			"sclk_decon_vclk_disp",
-			"sclk_decon_eclk_disp",
-			"sclk_decon_tv_vclk_disp",
-			"aclk_disp_333";
-		clocks = <&xxti>,
-		       <&cmu_mif CLK_SCLK_DSIM1_DISP>,
-		       <&cmu_mif CLK_SCLK_DSIM0_DISP>,
-		       <&cmu_mif CLK_SCLK_DSD_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_TV_ECLK_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_VCLK_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_ECLK_DISP>,
-		       <&cmu_mif CLK_SCLK_DECON_TV_VCLK_DISP>,
-		       <&cmu_mif CLK_ACLK_DISP_333>;
-		power-domains = <&pd_disp>;
-	};
-
-	cmu_aud: clock-controller@114c0000 {
-		compatible = "samsung,exynos5433-cmu-aud";
-		reg = <0x114c0000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "fout_aud_pll";
-		clocks = <&xxti>, <&cmu_top CLK_FOUT_AUD_PLL>;
-		power-domains = <&pd_aud>;
-	};
-
-	cmu_bus0: clock-controller@13600000 {
-		compatible = "samsung,exynos5433-cmu-bus0";
-		reg = <0x13600000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "aclk_bus0_400";
-		clocks = <&cmu_top CLK_ACLK_BUS0_400>;
-	};
-
-	cmu_bus1: clock-controller@14800000 {
-		compatible = "samsung,exynos5433-cmu-bus1";
-		reg = <0x14800000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "aclk_bus1_400";
-		clocks = <&cmu_top CLK_ACLK_BUS1_400>;
-	};
-
-	cmu_bus2: clock-controller@13400000 {
-		compatible = "samsung,exynos5433-cmu-bus2";
-		reg = <0x13400000 0x0b04>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_bus2_400";
-		clocks = <&xxti>, <&cmu_mif CLK_ACLK_BUS2_400>;
-	};
-
-	cmu_g3d: clock-controller@14aa0000 {
-		compatible = "samsung,exynos5433-cmu-g3d";
-		reg = <0x14aa0000 0x1000>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_g3d_400";
-		clocks = <&xxti>, <&cmu_top CLK_ACLK_G3D_400>;
-		power-domains = <&pd_g3d>;
-	};
-
-	cmu_gscl: clock-controller@13cf0000 {
-		compatible = "samsung,exynos5433-cmu-gscl";
-		reg = <0x13cf0000 0x0b10>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_gscl_111",
-			"aclk_gscl_333";
-		clocks = <&xxti>,
-			<&cmu_top CLK_ACLK_GSCL_111>,
-			<&cmu_top CLK_ACLK_GSCL_333>;
-		power-domains = <&pd_gscl>;
-	};
-
-	cmu_apollo: clock-controller@11900000 {
-		compatible = "samsung,exynos5433-cmu-apollo";
-		reg = <0x11900000 0x1088>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "sclk_bus_pll_apollo";
-		clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_APOLLO>;
-	};
-
-	cmu_atlas: clock-controller@11800000 {
-		compatible = "samsung,exynos5433-cmu-atlas";
-		reg = <0x11800000 0x1088>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "sclk_bus_pll_atlas";
-		clocks = <&xxti>, <&cmu_mif CLK_SCLK_BUS_PLL_ATLAS>;
-	};
-
-	cmu_mscl: clock-controller@105d0000 {
-		compatible = "samsung,exynos5433-cmu-mscl";
-		reg = <0x105d0000 0x0b10>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_jpeg_mscl",
-			"aclk_mscl_400";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_SCLK_JPEG_MSCL>,
-		       <&cmu_top CLK_ACLK_MSCL_400>;
-		power-domains = <&pd_mscl>;
-	};
-
-	cmu_mfc: clock-controller@15280000 {
-		compatible = "samsung,exynos5433-cmu-mfc";
-		reg = <0x15280000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_mfc_400";
-		clocks = <&xxti>, <&cmu_top CLK_ACLK_MFC_400>;
-		power-domains = <&pd_mfc>;
-	};
-
-	cmu_hevc: clock-controller@14f80000 {
-		compatible = "samsung,exynos5433-cmu-hevc";
-		reg = <0x14f80000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk", "aclk_hevc_400";
-		clocks = <&xxti>, <&cmu_top CLK_ACLK_HEVC_400>;
-		power-domains = <&pd_hevc>;
-	};
-
-	cmu_isp: clock-controller@146d0000 {
-		compatible = "samsung,exynos5433-cmu-isp";
-		reg = <0x146d0000 0x0b0c>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_isp_dis_400",
-			"aclk_isp_400";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_ACLK_ISP_DIS_400>,
-		       <&cmu_top CLK_ACLK_ISP_400>;
-		power-domains = <&pd_isp>;
-	};
-
-	cmu_cam0: clock-controller@120d0000 {
-		compatible = "samsung,exynos5433-cmu-cam0";
-		reg = <0x120d0000 0x0b0c>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_cam0_333",
-			"aclk_cam0_400",
-			"aclk_cam0_552";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_ACLK_CAM0_333>,
-		       <&cmu_top CLK_ACLK_CAM0_400>,
-		       <&cmu_top CLK_ACLK_CAM0_552>;
-		power-domains = <&pd_cam0>;
-	};
-
-	cmu_cam1: clock-controller@145d0000 {
-		compatible = "samsung,exynos5433-cmu-cam1";
-		reg = <0x145d0000 0x0b08>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"sclk_isp_uart_cam1",
-			"sclk_isp_spi1_cam1",
-			"sclk_isp_spi0_cam1",
-			"aclk_cam1_333",
-			"aclk_cam1_400",
-			"aclk_cam1_552";
-		clocks = <&xxti>,
-		       <&cmu_top CLK_SCLK_ISP_UART_CAM1>,
-		       <&cmu_top CLK_SCLK_ISP_SPI1_CAM1>,
-		       <&cmu_top CLK_SCLK_ISP_SPI0_CAM1>,
-		       <&cmu_top CLK_ACLK_CAM1_333>,
-		       <&cmu_top CLK_ACLK_CAM1_400>,
-		       <&cmu_top CLK_ACLK_CAM1_552>;
-		power-domains = <&pd_cam1>;
-	};
-
-	cmu_imem: clock-controller@11060000 {
-		compatible = "samsung,exynos5433-cmu-imem";
-		reg = <0x11060000 0x1000>;
-		#clock-cells = <1>;
-
-		clock-names = "oscclk",
-			"aclk_imem_sssx_266",
-			"aclk_imem_266",
-			"aclk_imem_200";
-		clocks = <&xxti>,
-			<&cmu_top CLK_DIV_ACLK_IMEM_SSSX_266>,
-			<&cmu_top CLK_DIV_ACLK_IMEM_266>,
-			<&cmu_top CLK_DIV_ACLK_IMEM_200>;
-	};
-
-Example 3: UART controller node that consumes the clock generated by the clock
-	   controller.
-
-	serial_0: serial@14c10000 {
-		compatible = "samsung,exynos5433-uart";
-		reg = <0x14C10000 0x100>;
-		interrupts = <0 421 0>;
-		clocks = <&cmu_peric CLK_PCLK_UART0>,
-			 <&cmu_peric CLK_SCLK_UART0>;
-		clock-names = "uart", "clk_uart_baud0";
-		pinctrl-names = "default";
-		pinctrl-0 = <&uart0_bus>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/exynos7-clock.txt b/Documentation/devicetree/bindings/clock/exynos7-clock.txt
deleted file mode 100644
index 6bf1e7493f61..000000000000
--- a/Documentation/devicetree/bindings/clock/exynos7-clock.txt
+++ /dev/null
@@ -1,108 +0,0 @@
-* Samsung Exynos7 Clock Controller
-
-Exynos7 clock controller has various blocks which are instantiated
-independently from the device-tree. These clock controllers
-generate and supply clocks to various hardware blocks within
-the SoC.
-
-Each clock is assigned an identifier and client nodes can use
-this identifier to specify the clock which they consume. All
-available clocks are defined as preprocessor macros in
-dt-bindings/clock/exynos7-clk.h header and can be used in
-device tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It
-is expected that they are defined using standard clock bindings
-with following clock-output-names:
-
- - "fin_pll" - PLL input clock from XXTI
-
-Required Properties for Clock Controller:
-
- - compatible: clock controllers will use one of the following
-	compatible strings to indicate the clock controller
-	functionality.
-
-	- "samsung,exynos7-clock-topc"
-	- "samsung,exynos7-clock-top0"
-	- "samsung,exynos7-clock-top1"
-	- "samsung,exynos7-clock-ccore"
-	- "samsung,exynos7-clock-peric0"
-	- "samsung,exynos7-clock-peric1"
-	- "samsung,exynos7-clock-peris"
-	- "samsung,exynos7-clock-fsys0"
-	- "samsung,exynos7-clock-fsys1"
-	- "samsung,exynos7-clock-mscl"
-	- "samsung,exynos7-clock-aud"
-
- - reg: physical base address of the controller and the length of
-	memory mapped region.
-
- - #clock-cells: should be 1.
-
- - clocks: list of clock identifiers which are fed as the input to
-	the given clock controller. Please refer the next section to
-	find the input clocks for a given controller.
-
-- clock-names: list of names of clocks which are fed as the input
-	to the given clock controller.
-
-Input clocks for top0 clock controller:
-	- fin_pll
-	- dout_sclk_bus0_pll
-	- dout_sclk_bus1_pll
-	- dout_sclk_cc_pll
-	- dout_sclk_mfc_pll
-	- dout_sclk_aud_pll
-
-Input clocks for top1 clock controller:
-	- fin_pll
-	- dout_sclk_bus0_pll
-	- dout_sclk_bus1_pll
-	- dout_sclk_cc_pll
-	- dout_sclk_mfc_pll
-
-Input clocks for ccore clock controller:
-	- fin_pll
-	- dout_aclk_ccore_133
-
-Input clocks for peric0 clock controller:
-	- fin_pll
-	- dout_aclk_peric0_66
-	- sclk_uart0
-
-Input clocks for peric1 clock controller:
-	- fin_pll
-	- dout_aclk_peric1_66
-	- sclk_uart1
-	- sclk_uart2
-	- sclk_uart3
-	- sclk_spi0
-	- sclk_spi1
-	- sclk_spi2
-	- sclk_spi3
-	- sclk_spi4
-	- sclk_i2s1
-	- sclk_pcm1
-	- sclk_spdif
-
-Input clocks for peris clock controller:
-	- fin_pll
-	- dout_aclk_peris_66
-
-Input clocks for fsys0 clock controller:
-	- fin_pll
-	- dout_aclk_fsys0_200
-	- dout_sclk_mmc2
-
-Input clocks for fsys1 clock controller:
-	- fin_pll
-	- dout_aclk_fsys1_200
-	- dout_sclk_mmc0
-	- dout_sclk_mmc1
-
-Input clocks for aud clock controller:
-	- fin_pll
-	- fout_aud_pll
diff --git a/Documentation/devicetree/bindings/clock/imx5-clock.yaml b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
index b1740d7abe68..c0e19ff92c76 100644
--- a/Documentation/devicetree/bindings/clock/imx5-clock.yaml
+++ b/Documentation/devicetree/bindings/clock/imx5-clock.yaml
@@ -55,11 +55,4 @@ examples:
                      <0 72 IRQ_TYPE_LEVEL_HIGH>;
         #clock-cells = <1>;
     };
-
-    can@53fc8000 {
-        compatible = "fsl,imx53-flexcan", "fsl,imx25-flexcan";
-        reg = <0x53fc8000 0x4000>;
-        interrupts = <82>;
-        clocks = <&clks IMX5_CLK_CAN1_IPG_GATE>, <&clks IMX5_CLK_CAN1_SERIAL_GATE>;
-        clock-names = "ipg", "per";
-    };
+...
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml
new file mode 100644
index 000000000000..a3fac5c6809d
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5260-clock.yaml
@@ -0,0 +1,382 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5260-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5260 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+    - "xrtcxti" - input clock from XRTCXTI
+    - "ioclk_pcm_extclk" - pcm external operation clock
+    - "ioclk_spdif_extclk" - spdif external operation clock
+    - "ioclk_i2s_cdclk" - i2s0 codec clock
+
+  Phy clocks::
+  There are several clocks which are generated by specific PHYs.  These clocks
+  are fed into the clock controller and then routed to the hardware blocks.
+  These clocks are defined as fixed clocks in the driver with following names::
+    - "phyclk_dptx_phy_ch3_txd_clk" - dp phy clock for channel 3
+    - "phyclk_dptx_phy_ch2_txd_clk" - dp phy clock for channel 2
+    - "phyclk_dptx_phy_ch1_txd_clk" - dp phy clock for channel 1
+    - "phyclk_dptx_phy_ch0_txd_clk" - dp phy clock for channel 0
+    - "phyclk_hdmi_phy_tmds_clko" - hdmi phy tmds clock
+    - "phyclk_hdmi_phy_pixel_clko" - hdmi phy pixel clock
+    - "phyclk_hdmi_link_o_tmds_clkhi" - hdmi phy for hdmi link
+    - "phyclk_dptx_phy_o_ref_clk_24m" - dp phy reference clock
+    - "phyclk_dptx_phy_clk_div2"
+    - "phyclk_mipi_dphy_4l_m_rxclkesc0"
+    - "phyclk_usbhost20_phy_phyclock" - usb 2.0 phy clock
+    - "phyclk_usbhost20_phy_freeclk"
+    - "phyclk_usbhost20_phy_clk48mohci"
+    - "phyclk_usbdrd30_udrd30_pipe_pclk"
+    - "phyclk_usbdrd30_udrd30_phyclock" - usb 3.0 phy clock
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5260-clk.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos5260-clock-top
+      - samsung,exynos5260-clock-peri
+      - samsung,exynos5260-clock-egl
+      - samsung,exynos5260-clock-kfc
+      - samsung,exynos5260-clock-g2d
+      - samsung,exynos5260-clock-mif
+      - samsung,exynos5260-clock-mfc
+      - samsung,exynos5260-clock-g3d
+      - samsung,exynos5260-clock-fsys
+      - samsung,exynos5260-clock-aud
+      - samsung,exynos5260-clock-isp
+      - samsung,exynos5260-clock-gscl
+      - samsung,exynos5260-clock-disp
+
+  clocks:
+    minItems: 1
+    maxItems: 19
+
+  clock-names:
+    minItems: 1
+    maxItems: 19
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-top
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_mem_pll
+            - const: dout_bus_pll
+            - const: dout_media_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-peri
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: ioclk_pcm_extclk
+            - const: ioclk_i2s_cdclk
+            - const: ioclk_spdif_extclk
+            - const: phyclk_hdmi_phy_ref_cko
+            - const: dout_aclk_peri_66
+            - const: dout_sclk_peri_uart0
+            - const: dout_sclk_peri_uart1
+            - const: dout_sclk_peri_uart2
+            - const: dout_sclk_peri_spi0_b
+            - const: dout_sclk_peri_spi1_b
+            - const: dout_sclk_peri_spi2_b
+            - const: dout_aclk_peri_aud
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-egl
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_bus_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-kfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_media_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-g2d
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_g2d_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-mif
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: fin_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-mfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_mfc_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-g3d
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: fin_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-fsys
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: phyclk_usbhost20_phy_phyclock
+            - const: phyclk_usbhost20_phy_freeclk
+            - const: phyclk_usbhost20_phy_clk48mohci
+            - const: phyclk_usbdrd30_udrd30_pipe_pclk
+            - const: phyclk_usbdrd30_udrd30_phyclock
+            - const: dout_aclk_fsys_200
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-aud
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: fout_aud_pll
+            - const: ioclk_i2s_cdclk
+            - const: ioclk_pcm_extclk
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-isp
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_isp1_266
+            - const: dout_aclk_isp1_400
+            - const: mout_aclk_isp1_266
+
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-gscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_gscl_400
+            - const: dout_aclk_gscl_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5260-clock-disp
+    then:
+      properties:
+        clocks:
+          minItems: 19
+          maxItems: 19
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: phyclk_dptx_phy_ch3_txd_clk
+            - const: phyclk_dptx_phy_ch2_txd_clk
+            - const: phyclk_dptx_phy_ch1_txd_clk
+            - const: phyclk_dptx_phy_ch0_txd_clk
+            - const: phyclk_hdmi_phy_tmds_clko
+            - const: phyclk_hdmi_phy_ref_clko
+            - const: phyclk_hdmi_phy_pixel_clko
+            - const: phyclk_hdmi_link_o_tmds_clkhi
+            - const: phyclk_mipi_dphy_4l_m_txbyte_clkhs
+            - const: phyclk_dptx_phy_o_ref_clk_24m
+            - const: phyclk_dptx_phy_clk_div2
+            - const: phyclk_mipi_dphy_4l_m_rxclkesc0
+            - const: phyclk_hdmi_phy_ref_cko
+            - const: ioclk_spdif_extclk
+            - const: dout_aclk_peri_aud
+            - const: dout_aclk_disp_222
+            - const: dout_sclk_disp_pixel
+            - const: dout_aclk_disp_333
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5260-clk.h>
+
+    fin_pll: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@10010000 {
+        compatible = "samsung,exynos5260-clock-top";
+        reg = <0x10010000 0x10000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>,
+                 <&clock_mif MIF_DOUT_MEM_PLL>,
+                 <&clock_mif MIF_DOUT_BUS_PLL>,
+                 <&clock_mif MIF_DOUT_MEDIA_PLL>;
+        clock-names = "fin_pll",
+                      "dout_mem_pll",
+                      "dout_bus_pll",
+                      "dout_media_pll";
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml
new file mode 100644
index 000000000000..032862e9f55b
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5410-clock.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5410-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5410 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5410.h header.
+
+properties:
+  compatible:
+    oneOf:
+      - enum:
+          - samsung,exynos5410-clock
+
+  clocks:
+    description:
+      Should contain an entry specifying the root clock from external
+      oscillator supplied through XXTI or XusbXTI pin.  This clock should be
+      defined using standard clock bindings with "fin_pll" clock-output-name.
+      That clock is being passed internally to the 9 PLLs.
+    maxItems: 1
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5410.h>
+
+    fin_pll: osc-clock {
+        compatible = "fixed-clock";
+        clock-frequency = <24000000>;
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+    };
+
+    clock-controller@10010000 {
+        compatible = "samsung,exynos5410-clock";
+        reg = <0x10010000 0x30000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml
new file mode 100644
index 000000000000..edd1b4ac4334
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos5433-clock.yaml
@@ -0,0 +1,524 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos5433-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos5433 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "oscclk" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos5433.h header.
+
+properties:
+  compatible:
+    enum:
+        # CMU_TOP which generates clocks for
+        # IMEM/FSYS/G3D/GSCL/HEVC/MSCL/G2D/MFC/PERIC/PERIS domains and bus
+        # clocks
+      - samsung,exynos5433-cmu-top
+        # CMU_CPIF which generates clocks for LLI (Low Latency Interface) IP
+      - samsung,exynos5433-cmu-cpif
+        # CMU_MIF which generates clocks for DRAM Memory Controller domain
+      - samsung,exynos5433-cmu-mif
+        # CMU_PERIC which generates clocks for
+        # UART/I2C/SPI/I2S/PCM/SPDIF/PWM/SLIMBUS IPs
+      - samsung,exynos5433-cmu-peric
+        # CMU_PERIS which generates clocks for PMU/TMU/MCT/WDT/RTC/SECKEY/TZPC IPs
+      - samsung,exynos5433-cmu-peris
+        # CMU_FSYS which generates clocks for USB/UFS/SDMMC/TSI/PDMA IPs
+      - samsung,exynos5433-cmu-fsys
+      - samsung,exynos5433-cmu-g2d
+        # CMU_DISP which generates clocks for Display (DECON/HDMI/DSIM/MIXER) IPs
+      - samsung,exynos5433-cmu-disp
+      - samsung,exynos5433-cmu-aud
+      - samsung,exynos5433-cmu-bus0
+      - samsung,exynos5433-cmu-bus1
+      - samsung,exynos5433-cmu-bus2
+      - samsung,exynos5433-cmu-g3d
+      - samsung,exynos5433-cmu-gscl
+      - samsung,exynos5433-cmu-apollo
+        # CMU_ATLAS which generates clocks for Cortex-A57 Quad-core processor,
+        # CoreSight and  L2 cache controller
+      - samsung,exynos5433-cmu-atlas
+        # CMU_MSCL which generates clocks for M2M (Memory to Memory) scaler and
+        # JPEG IPs
+      - samsung,exynos5433-cmu-mscl
+      - samsung,exynos5433-cmu-mfc
+      - samsung,exynos5433-cmu-hevc
+        # CMU_ISP which generates clocks for FIMC-ISP/DRC/SCLC/DIS/3DNR IPs
+      - samsung,exynos5433-cmu-isp
+        # CMU_CAM0 which generates clocks for
+        # MIPI_CSIS{0|1}/FIMC_LITE_{A|B|D}/FIMC_3AA{0|1} IPs
+      - samsung,exynos5433-cmu-cam0
+        # CMU_CAM1 which generates clocks for
+        # Cortex-A5/MIPI_CSIS2/FIMC-LITE_C/FIMC-FD IPs
+      - samsung,exynos5433-cmu-cam1
+        # CMU_IMEM which generates clocks for SSS (Security SubSystem) and
+        # SlimSSS IPs
+      - samsung,exynos5433-cmu-imem
+
+  clocks:
+    minItems: 1
+    maxItems: 10
+
+  clock-names:
+    minItems: 1
+    maxItems: 10
+
+  "#clock-cells":
+    const: 1
+
+  power-domains:
+    maxItems: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-top
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_mphy_pll
+            - const: sclk_mfc_pll
+            - const: sclk_bus_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cpif
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: oscclk
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mif
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_mphy_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-fsys
+    then:
+      properties:
+        clocks:
+          minItems: 10
+          maxItems: 10
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_ufs_mphy
+            - const: aclk_fsys_200
+            - const: sclk_pcie_100_fsys
+            - const: sclk_ufsunipro_fsys
+            - const: sclk_mmc2_fsys
+            - const: sclk_mmc1_fsys
+            - const: sclk_mmc0_fsys
+            - const: sclk_usbhost30_fsys
+            - const: sclk_usbdrd30_fsys
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-g2d
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_g2d_266
+            - const: aclk_g2d_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-disp
+    then:
+      properties:
+        clocks:
+          minItems: 9
+          maxItems: 9
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_dsim1_disp
+            - const: sclk_dsim0_disp
+            - const: sclk_dsd_disp
+            - const: sclk_decon_tv_eclk_disp
+            - const: sclk_decon_vclk_disp
+            - const: sclk_decon_eclk_disp
+            - const: sclk_decon_tv_vclk_disp
+            - const: aclk_disp_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-aud
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: fout_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus0
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: aclk_bus0_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus1
+    then:
+      properties:
+        clocks:
+          minItems: 1
+          maxItems: 1
+        clock-names:
+          items:
+            - const: aclk_bus1_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-bus2
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_bus2_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-g3d
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_g3d_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-gscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_gscl_111
+            - const: aclk_gscl_333
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-apollo
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_bus_pll_apollo
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-atlas
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_bus_pll_atlas
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mscl
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_jpeg_mscl
+            - const: aclk_mscl_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-mfc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_mfc_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-hevc
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_hevc_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-isp
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_isp_dis_400
+            - const: aclk_isp_400
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cam0
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_cam0_333
+            - const: aclk_cam0_400
+            - const: aclk_cam0_552
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-cam1
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: oscclk
+            - const: sclk_isp_uart_cam1
+            - const: sclk_isp_spi1_cam1
+            - const: sclk_isp_spi0_cam1
+            - const: aclk_cam1_333
+            - const: aclk_cam1_400
+            - const: aclk_cam1_552
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos5433-cmu-imem
+    then:
+      properties:
+        clocks:
+          minItems: 4
+          maxItems: 4
+        clock-names:
+          items:
+            - const: oscclk
+            - const: aclk_imem_sssx_266
+            - const: aclk_imem_266
+            - const: aclk_imem_200
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos5433.h>
+    xxti: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "oscclk";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@10030000 {
+        compatible = "samsung,exynos5433-cmu-top";
+        reg = <0x10030000 0x1000>;
+        #clock-cells = <1>;
+
+        clock-names = "oscclk",
+                      "sclk_mphy_pll",
+                      "sclk_mfc_pll",
+                      "sclk_bus_pll";
+        clocks = <&xxti>,
+                 <&cmu_cpif CLK_SCLK_MPHY_PLL>,
+                 <&cmu_mif CLK_SCLK_MFC_PLL>,
+                 <&cmu_mif CLK_SCLK_BUS_PLL>;
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml
new file mode 100644
index 000000000000..599baf0b7231
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,exynos7-clock.yaml
@@ -0,0 +1,272 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,exynos7-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung Exynos7 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "fin_pll" - PLL input clock from XXTI
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/exynos7-clk.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,exynos7-clock-topc
+      - samsung,exynos7-clock-top0
+      - samsung,exynos7-clock-top1
+      - samsung,exynos7-clock-ccore
+      - samsung,exynos7-clock-peric0
+      - samsung,exynos7-clock-peric1
+      - samsung,exynos7-clock-peris
+      - samsung,exynos7-clock-fsys0
+      - samsung,exynos7-clock-fsys1
+      - samsung,exynos7-clock-mscl
+      - samsung,exynos7-clock-aud
+
+  clocks:
+    minItems: 1
+    maxItems: 13
+
+  clock-names:
+    minItems: 1
+    maxItems: 13
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-top0
+    then:
+      properties:
+        clocks:
+          minItems: 6
+          maxItems: 6
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_sclk_bus0_pll
+            - const: dout_sclk_bus1_pll
+            - const: dout_sclk_cc_pll
+            - const: dout_sclk_mfc_pll
+            - const: dout_sclk_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-top1
+    then:
+      properties:
+        clocks:
+          minItems: 5
+          maxItems: 5
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_sclk_bus0_pll
+            - const: dout_sclk_bus1_pll
+            - const: dout_sclk_cc_pll
+            - const: dout_sclk_mfc_pll
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-ccore
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_ccore_133
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peric0
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peric0_66
+            - const: sclk_uart0
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peric1
+    then:
+      properties:
+        clocks:
+          minItems: 13
+          maxItems: 13
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peric1_66
+            - const: sclk_uart1
+            - const: sclk_uart2
+            - const: sclk_uart3
+            - const: sclk_spi0
+            - const: sclk_spi1
+            - const: sclk_spi2
+            - const: sclk_spi3
+            - const: sclk_spi4
+            - const: sclk_i2s1
+            - const: sclk_pcm1
+            - const: sclk_spdif
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-peris
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_peris_66
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-fsys0
+    then:
+      properties:
+        clocks:
+          minItems: 3
+          maxItems: 3
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_fsys0_200
+            - const: dout_sclk_mmc2
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-fsys1
+    then:
+      properties:
+        clocks:
+          minItems: 7
+          maxItems: 7
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: dout_aclk_fsys1_200
+            - const: dout_sclk_mmc0
+            - const: dout_sclk_mmc1
+            - const: dout_sclk_ufsunipro20
+            - const: dout_sclk_phy_fsys1
+            - const: dout_sclk_phy_fsys1_26m
+      required:
+        - clock-names
+        - clocks
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: samsung,exynos7-clock-aud
+    then:
+      properties:
+        clocks:
+          minItems: 2
+          maxItems: 2
+        clock-names:
+          items:
+            - const: fin_pll
+            - const: fout_aud_pll
+      required:
+        - clock-names
+        - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/exynos7-clk.h>
+
+    fin_pll: clock {
+        compatible = "fixed-clock";
+        clock-output-names = "fin_pll";
+        #clock-cells = <0>;
+        clock-frequency = <24000000>;
+    };
+
+    clock-controller@105e0000 {
+        compatible = "samsung,exynos7-clock-top1";
+        reg = <0x105e0000 0xb000>;
+        #clock-cells = <1>;
+        clocks = <&fin_pll>,
+                 <&clock_topc DOUT_SCLK_BUS0_PLL>,
+                 <&clock_topc DOUT_SCLK_BUS1_PLL>,
+                 <&clock_topc DOUT_SCLK_CC_PLL>,
+                 <&clock_topc DOUT_SCLK_MFC_PLL>;
+        clock-names = "fin_pll",
+                      "dout_sclk_bus0_pll",
+                      "dout_sclk_bus1_pll",
+                      "dout_sclk_cc_pll",
+                      "dout_sclk_mfc_pll";
+    };
diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt
deleted file mode 100644
index a86c83bf9d4e..000000000000
--- a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.txt
+++ /dev/null
@@ -1,77 +0,0 @@
-* Samsung S5P6442/S5PC110/S5PV210 Clock Controller
-
-Samsung S5P6442, S5PC110 and S5PV210 SoCs contain integrated clock
-controller, which generates and supplies clock to various controllers
-within the SoC.
-
-Required Properties:
-
-- compatible: should be one of following:
-	- "samsung,s5pv210-clock" : for clock controller of Samsung
-	  S5PC110/S5PV210 SoCs,
-	- "samsung,s5p6442-clock" : for clock controller of Samsung
-	  S5P6442 SoC.
-
-- reg: physical base address of the controller and length of memory mapped
-  region.
-
-- #clock-cells: should be 1.
-
-All available clocks are defined as preprocessor macros in
-dt-bindings/clock/s5pv210.h header and can be used in device tree sources.
-
-External clocks:
-
-There are several clocks that are generated outside the SoC. It is expected
-that they are defined using standard clock bindings with following
-clock-output-names:
- - "xxti": external crystal oscillator connected to XXTI and XXTO pins of
-the SoC,
- - "xusbxti": external crystal oscillator connected to XUSBXTI and XUSBXTO
-pins of the SoC,
-
-A subset of above clocks available on given board shall be specified in
-board device tree, including the system base clock, as selected by XOM[0]
-pin of the SoC. Refer to generic fixed rate clock bindings
-documentation[1] for more information how to specify these clocks.
-
-[1] Documentation/devicetree/bindings/clock/fixed-clock.yaml
-
-Example: Clock controller node:
-
-	clock: clock-controller@7e00f000 {
-		compatible = "samsung,s5pv210-clock";
-		reg = <0x7e00f000 0x1000>;
-		#clock-cells = <1>;
-	};
-
-Example: Required external clocks:
-
-	xxti: clock-xxti {
-		compatible = "fixed-clock";
-		clock-output-names = "xxti";
-		clock-frequency = <24000000>;
-		#clock-cells = <0>;
-	};
-
-	xusbxti: clock-xusbxti {
-		compatible = "fixed-clock";
-		clock-output-names = "xusbxti";
-		clock-frequency = <24000000>;
-		#clock-cells = <0>;
-	};
-
-Example: UART controller node that consumes the clock generated by the clock
-  controller (refer to the standard clock bindings for information about
-  "clocks" and "clock-names" properties):
-
-	uart0: serial@e2900000 {
-		compatible = "samsung,s5pv210-uart";
-		reg = <0xe2900000 0x400>;
-		interrupt-parent = <&vic1>;
-		interrupts = <10>;
-		clock-names = "uart", "clk_uart_baud0",
-				"clk_uart_baud1";
-		clocks = <&clocks UART0>, <&clocks UART0>,
-				<&clocks SCLK_UART0>;
-	};
diff --git a/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml
new file mode 100644
index 000000000000..dcb29a2d1159
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/samsung,s5pv210-clock.yaml
@@ -0,0 +1,79 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/samsung,s5pv210-clock.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Samsung S5P6442/S5PC110/S5PV210 SoC clock controller
+
+maintainers:
+  - Chanwoo Choi <cw00.choi@samsung.com>
+  - Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
+  - Sylwester Nawrocki <s.nawrocki@samsung.com>
+  - Tomasz Figa <tomasz.figa@gmail.com>
+
+description: |
+  Expected external clocks, defined in DTS as fixed-rate clocks with a matching
+  name::
+    - "xxti" - external crystal oscillator connected to XXTI and XXTO pins of
+      the SoC,
+    - "xusbxti" - external crystal oscillator connected to XUSBXTI and XUSBXTO
+      pins of the SoC,
+
+  All available clocks are defined as preprocessor macros in
+  include/dt-bindings/clock/s5pv210.h header.
+
+properties:
+  compatible:
+    enum:
+      - samsung,s5pv210-clock
+      - samsung,s5p6442-clock
+
+  clocks:
+    items:
+      - description: xxti clock
+      - description: xusbxti clock
+
+  clock-names:
+    items:
+      - const: xxti
+      - const: xusbxti
+
+  "#clock-cells":
+    const: 1
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - "#clock-cells"
+  - reg
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/s5pv210.h>
+
+    xxti: clock-0 {
+        compatible = "fixed-clock";
+        clock-frequency = <0>;
+        clock-output-names = "xxti";
+        #clock-cells = <0>;
+    };
+
+    xusbxti: clock-1 {
+        compatible = "fixed-clock";
+        clock-frequency = <0>;
+        clock-output-names = "xusbxti";
+        #clock-cells = <0>;
+    };
+
+    clock-controller@e0100000 {
+        compatible = "samsung,s5pv210-clock";
+        reg = <0xe0100000 0x10000>;
+        clock-names = "xxti", "xusbxti";
+        clocks = <&xxti>, <&xusbxti>;
+        #clock-cells = <1>;
+    };