dt-bindings: consolidate eeprom bindings

Create a top level eeprom binding directory and move several scattered
binding files there.

Signed-off-by: Rob Herring <robh@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>

2 files changed, 63 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/eeprom/at25.txt b/Documentation/devicetree/bindings/eeprom/at25.txt
new file mode 100644
index 000000000000..1d3447165c37
--- /dev/null
+++ b/Documentation/devicetree/bindings/eeprom/at25.txt
@@ -0,0 +1,35 @@
+EEPROMs (SPI) compatible with Atmel at25.
+
+Required properties:
+- compatible : "atmel,at25".
+- reg : chip select number
+- spi-max-frequency : max spi frequency to use
+- pagesize : size of the eeprom page
+- size : total eeprom size in bytes
+- address-width : number of address bits (one of 8, 16, or 24)
+
+Optional properties:
+- spi-cpha : SPI shifted clock phase, as per spi-bus bindings.
+- spi-cpol : SPI inverse clock polarity, as per spi-bus bindings.
+- read-only : this parameter-less property disables writes to the eeprom
+
+Obsolete legacy properties are can be used in place of "size", "pagesize",
+"address-width", and "read-only":
+- at25,byte-len : total eeprom size in bytes
+- at25,addr-mode : addr-mode flags, as defined in include/linux/spi/eeprom.h
+- at25,page-size : size of the eeprom page
+
+Additional compatible properties are also allowed.
+
+Example:
+	at25@0 {
+		compatible = "atmel,at25", "st,m95256";
+		reg = <0>
+		spi-max-frequency = <5000000>;
+		spi-cpha;
+		spi-cpol;
+
+		pagesize = <64>;
+		size = <32768>;
+		address-width = <16>;
+	};
diff --git a/Documentation/devicetree/bindings/eeprom/eeprom.txt b/Documentation/devicetree/bindings/eeprom/eeprom.txt
new file mode 100644
index 000000000000..4342c10de1bf
--- /dev/null
+++ b/Documentation/devicetree/bindings/eeprom/eeprom.txt
@@ -0,0 +1,28 @@
+EEPROMs (I2C)
+
+Required properties:
+
+  - compatible : should be "<manufacturer>,<type>"
+		 If there is no specific driver for <manufacturer>, a generic
+		 driver based on <type> is selected. Possible types are:
+		 24c00, 24c01, 24c02, 24c04, 24c08, 24c16, 24c32, 24c64,
+		 24c128, 24c256, 24c512, 24c1024, spd
+
+  - reg : the I2C address of the EEPROM
+
+Optional properties:
+
+  - pagesize : the length of the pagesize for writing. Please consult the
+               manual of your device, that value varies a lot. A wrong value
+	       may result in data loss! If not specified, a safety value of
+	       '1' is used which will be very slow.
+
+  - read-only: this parameterless property disables writes to the eeprom
+
+Example:
+
+eeprom@52 {
+	compatible = "atmel,24c32";
+	reg = <0x52>;
+	pagesize = <32>;
+};