Merge branch 'core/urgent' into x86/urgent, to pick up objtool fix

Signed-off-by: Ingo Molnar <mingo@kernel.org>

2 files changed, 103 insertions, 12 deletions

diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
index fcf6979c0b6d..41f133a4e2fa 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
@@ -7,16 +7,23 @@ assorted actions.
 
 Required properties:
 - compatible: must contain one of the following:
- * "qcom,scm-apq8064" for APQ8064 platforms
- * "qcom,scm-msm8660" for MSM8660 platforms
- * "qcom,scm-msm8690" for MSM8690 platforms
- * "qcom,scm-msm8996" for MSM8996 platforms
- * "qcom,scm-ipq4019" for IPQ4019 platforms
- * "qcom,scm" for later processors (MSM8916, APQ8084, MSM8974, etc)
-- clocks: One to three clocks may be required based on compatible.
- * No clock required for "qcom,scm-msm8996", "qcom,scm-ipq4019"
- * Only core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660", and "qcom,scm-msm8960"
- * Core, iface, and bus clocks required for "qcom,scm"
+ * "qcom,scm-apq8064"
+ * "qcom,scm-apq8084"
+ * "qcom,scm-msm8660"
+ * "qcom,scm-msm8916"
+ * "qcom,scm-msm8960"
+ * "qcom,scm-msm8974"
+ * "qcom,scm-msm8996"
+ * "qcom,scm-msm8998"
+ * "qcom,scm-ipq4019"
+ * "qcom,scm-sdm845"
+ and:
+ * "qcom,scm"
+- clocks: Specifies clocks needed by the SCM interface, if any:
+ * core clock required for "qcom,scm-apq8064", "qcom,scm-msm8660" and
+   "qcom,scm-msm8960"
+ * core, iface and bus clocks required for "qcom,scm-apq8084",
+   "qcom,scm-msm8916" and "qcom,scm-msm8974"
 - clock-names: Must contain "core" for the core clock, "iface" for the interface
   clock and "bus" for the bus clock per the requirements of the compatible.
 - qcom,dload-mode: phandle to the TCSR hardware block and offset of the
@@ -26,8 +33,10 @@ Example for MSM8916:
 
 	firmware {
 		scm {
-			compatible = "qcom,scm";
-			clocks = <&gcc GCC_CRYPTO_CLK> , <&gcc GCC_CRYPTO_AXI_CLK>, <&gcc GCC_CRYPTO_AHB_CLK>;
+			compatible = "qcom,msm8916", "qcom,scm";
+			clocks = <&gcc GCC_CRYPTO_CLK> ,
+				 <&gcc GCC_CRYPTO_AXI_CLK>,
+				 <&gcc GCC_CRYPTO_AHB_CLK>;
 			clock-names = "core", "bus", "iface";
 		};
 	};
diff --git a/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
new file mode 100644
index 000000000000..614bac55df86
--- /dev/null
+++ b/Documentation/devicetree/bindings/firmware/xilinx/xlnx,zynqmp-firmware.txt
@@ -0,0 +1,82 @@
+-----------------------------------------------------------------
+Device Tree Bindings for the Xilinx Zynq MPSoC Firmware Interface
+-----------------------------------------------------------------
+
+The zynqmp-firmware node describes the interface to platform firmware.
+ZynqMP has an interface to communicate with secure firmware. Firmware
+driver provides an interface to firmware APIs. Interface APIs can be
+used by any driver to communicate to PMUFW(Platform Management Unit).
+These requests include clock management, pin control, device control,
+power management service, FPGA service and other platform management
+services.
+
+Required properties:
+ - compatible:	Must contain:	"xlnx,zynqmp-firmware"
+ - method:	The method of calling the PM-API firmware layer.
+		Permitted values are:
+		  - "smc" : SMC #0, following the SMCCC
+		  - "hvc" : HVC #0, following the SMCCC
+
+--------------------------------------------------------------------------
+Device Tree Clock bindings for the Zynq Ultrascale+ MPSoC controlled using
+Zynq MPSoC firmware interface
+--------------------------------------------------------------------------
+The clock controller is a h/w block of Zynq Ultrascale+ MPSoC clock
+tree. It reads required input clock frequencies from the devicetree and acts
+as clock provider for all clock consumers of PS clocks.
+
+See clock_bindings.txt for more information on the generic clock bindings.
+
+Required properties:
+ - #clock-cells:	Must be 1
+ - compatible:		Must contain:	"xlnx,zynqmp-clk"
+ - clocks:		List of clock specifiers which are external input
+			clocks to the given clock controller. Please refer
+			the next section to find the input clocks for a
+			given controller.
+ - clock-names:		List of clock names which are exteral input clocks
+			to the given clock controller. Please refer to the
+			clock bindings for more details.
+
+Input clocks for zynqmp Ultrascale+ clock controller:
+
+The Zynq UltraScale+ MPSoC has one primary and four alternative reference clock
+inputs. These required clock inputs are:
+ - pss_ref_clk (PS reference clock)
+ - video_clk (reference clock for video system )
+ - pss_alt_ref_clk (alternative PS reference clock)
+ - aux_ref_clk
+ - gt_crx_ref_clk (transceiver reference clock)
+
+The following strings are optional parameters to the 'clock-names' property in
+order to provide an optional (E)MIO clock source:
+ - swdt0_ext_clk
+ - swdt1_ext_clk
+ - gem0_emio_clk
+ - gem1_emio_clk
+ - gem2_emio_clk
+ - gem3_emio_clk
+ - mio_clk_XX		# with XX = 00..77
+ - mio_clk_50_or_51	#for the mux clock to gem tsu from 50 or 51
+
+
+Output clocks are registered based on clock information received
+from firmware. Output clocks indexes are mentioned in
+include/dt-bindings/clock/xlnx,zynqmp-clk.h.
+
+-------
+Example
+-------
+
+firmware {
+	zynqmp_firmware: zynqmp-firmware {
+		compatible = "xlnx,zynqmp-firmware";
+		method = "smc";
+		zynqmp_clk: clock-controller {
+			#clock-cells = <1>;
+			compatible = "xlnx,zynqmp-clk";
+			clocks = <&pss_ref_clk>, <&video_clk>, <&pss_alt_ref_clk>, <&aux_ref_clk>, <&gt_crx_ref_clk>;
+			clock-names = "pss_ref_clk", "video_clk", "pss_alt_ref_clk","aux_ref_clk", "gt_crx_ref_clk";
+		};
+	};
+};