Merge remote branch 'rmk/for-linus' into for-linus

* rmk/for-linus: (1557 commits)
  ARM: 6806/1: irq: introduce entry and exit functions for chained handlers
  ARM: 6781/1: Thumb-2: Work around buggy Thumb-2 short branch relocations in gas
  ARM: 6747/1: P2V: Thumb2 support
  ARM: 6798/1: aout-core: zero thread debug registers in a.out core dump
  ARM: 6796/1: Footbridge: Fix I/O mappings for NOMMU mode
  ARM: 6784/1: errata: no automatic Store Buffer drain on Cortex-A9
  ARM: 6772/1: errata: possible fault MMU translations following an ASID switch
  ARM: 6776/1: mach-ux500: activate fix for errata 753970
  ARM: 6794/1: SPEAr: Append UL to device address macros.
  ARM: 6793/1: SPEAr: Remove unused *_SIZE macros from spear*.h files
  ARM: 6792/1: SPEAr: Replace SIZE macro's with SZ_4K macros
  ARM: 6791/1: SPEAr3xx: Declare device structures after shirq code
  ARM: 6790/1: SPEAr: Clock Framework: Rename usbd clock and align apb_clk entry
  ARM: 6789/1: SPEAr3xx: Rename sdio to sdhci
  ARM: 6788/1: SPEAr: Include mach/hardware.h instead of mach/spear.h
  ARM: 6787/1: SPEAr: Reorder #includes in .h & .c files.
  ARM: 6681/1: SPEAr: add debugfs support to clk API
  ARM: 6703/1: SPEAr: update clk API support
  ARM: 6679/1: SPEAr: make clk API functions more generic
  ARM: 6737/1: SPEAr: formalized timer support
  ...

Conflicts:
	arch/arm/mach-msm/board-msm7x27.c
	arch/arm/mach-msm/board-msm7x30.c
	arch/arm/mach-msm/board-qsd8x50.c
	arch/arm/mach-msm/board-sapphire.c
	arch/arm/mach-msm/include/mach/memory.h

1 files changed, 64 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/i2c/fsl-i2c.txt b/Documentation/devicetree/bindings/i2c/fsl-i2c.txt
new file mode 100644
index 000000000000..1eacd6b20ed5
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/fsl-i2c.txt
@@ -0,0 +1,64 @@
+* I2C
+
+Required properties :
+
+ - reg : Offset and length of the register set for the device
+ - compatible : should be "fsl,CHIP-i2c" where CHIP is the name of a
+   compatible processor, e.g. mpc8313, mpc8543, mpc8544, mpc5121,
+   mpc5200 or mpc5200b. For the mpc5121, an additional node
+   "fsl,mpc5121-i2c-ctrl" is required as shown in the example below.
+
+Recommended properties :
+
+ - interrupts : <a b> where a is the interrupt number and b is a
+   field that represents an encoding of the sense and level
+   information for the interrupt.  This should be encoded based on
+   the information in section 2) depending on the type of interrupt
+   controller you have.
+ - interrupt-parent : the phandle for the interrupt controller that
+   services interrupts for this device.
+ - fsl,preserve-clocking : boolean; if defined, the clock settings
+   from the bootloader are preserved (not touched).
+ - clock-frequency : desired I2C bus clock frequency in Hz.
+ - fsl,timeout : I2C bus timeout in microseconds.
+
+Examples :
+
+	/* MPC5121 based board */
+	i2c@1740 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mpc5121-i2c", "fsl-i2c";
+		reg = <0x1740 0x20>;
+		interrupts = <11 0x8>;
+		interrupt-parent = <&ipic>;
+		clock-frequency = <100000>;
+	};
+
+	i2ccontrol@1760 {
+		compatible = "fsl,mpc5121-i2c-ctrl";
+		reg = <0x1760 0x8>;
+	};
+
+	/* MPC5200B based board */
+	i2c@3d00 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mpc5200b-i2c","fsl,mpc5200-i2c","fsl-i2c";
+		reg = <0x3d00 0x40>;
+		interrupts = <2 15 0>;
+		interrupt-parent = <&mpc5200_pic>;
+		fsl,preserve-clocking;
+	};
+
+	/* MPC8544 base board */
+	i2c@3100 {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "fsl,mpc8544-i2c", "fsl-i2c";
+		reg = <0x3100 0x100>;
+		interrupts = <43 2>;
+		interrupt-parent = <&mpic>;
+		clock-frequency = <400000>;
+		fsl,timeout = <10000>;
+	};