I2C: MV64XYZ: Add Device Tree support

Extends the driver to get properties from device tree. Rather than
pass the N & M factors in DT, use the more standard clock-frequency
property. Calculate N & M at run time. In order to do this, we need to
know tclk. So the driver uses clk_get() etc in order to get the clock
and clk_get_rate() to determine the tclk rate. Not all platforms
however have CLK, so some #ifdefery is needed to ensure the driver
still compiles when CLK is not available.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>

[wsa: converted some ints to u32 to match signedness]

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>

1 files changed, 18 insertions, 1 deletions

diff --git a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
index b891ee218354..0f7945019f6f 100644
--- a/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
+++ b/Documentation/devicetree/bindings/i2c/mrvl-i2c.txt
@@ -1,4 +1,4 @@
-* I2C
+* Marvell MMP I2C controller
 
 Required properties :
 
@@ -32,3 +32,20 @@ Examples:
 		interrupts = <58>;
 	};
 
+* Marvell MV64XXX I2C controller
+
+Required properties :
+
+ - reg             : Offset and length of the register set for the device
+ - compatible      : Should be "marvell,mv64xxx-i2c"
+ - interrupts      : The interrupt number
+ - clock-frequency : Desired I2C bus clock frequency in Hz.
+
+Examples:
+
+	i2c@11000 {
+		compatible = "marvell,mv64xxx-i2c";
+		reg = <0x11000 0x20>;
+		interrupts = <29>;
+		clock-frequency = <100000>;
+	};