Merge tag 'iio-for-4.9b' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-next

Jonathan writes:

Second set of iio new device support, features and cleanups for the 4.9 cycle.

New device support
* ad8801 dac
  - new driver supporting ad8801 and ad8803 DACs.
* adc12138
  - new driver supporting TI adc12130/adc12132 and adc12138 ADCs.
* ltc2485 adc
  - new driver
* mxc6255
  - add support for the mxc6225 part name and fixup the ID check so it works.
* vz89x VOC sensor
  - add support for the vz89te part which drops the voc_short channel and adds
    CRCs compared to other supported parts.

New features
* core
  - immutable triggers.  These effectively grant exclusive control over a
    trigger. The typical usecase is a device representing an analog part
    (perhaps a MUX) that needs to control the sampling of a downstream
    ADC.
  - resource managed trigger registration and triggered_buffer_init.
  - iio_push_event now protected against case of the event interface
    registration not having yet occured.  Only matters if an interrupt
    can occur during this window - might happen on shared interrupt lines.
  - helper to let a driver query if the trigger it is using is provided by
    itself (using the convention of both device and trigger having the same
    parent).
* tools
  - iio-utils. Used channel modifier scaling in preference to generic scaling
    when both exist.
* at91-adc
  - Add support for touchscreen switches closure time needed by some newer
    parts.
* stx104
  - support the ADC channels on this ADC/DAC board. As these are the primary
    feature of the board also move the driver to the iio/adc directory.
* sx9500
  - device tree bindings.

Cleanups / Fixes
* ad5755
  - fix an off-by-one on devnr limit check (introduced earlier this cycle)
* ad7266
  - drop NULL check on devm_regulator_get_optional as it can't return NULL.
* ak8974
  - avoid an unused functional warning due to rework in PM core code.
  - remove .owner field setting as done by i2c_core.
* ina2xx
  - clear out a left over debug field from chip global data.
* hid-sensors
  - avoid an unused functional warning due to rework in PM core code.
* maxim-thermocouple
  - fix non static symbol warnings.
* ms5611
  - fetch and enable regulators unconditionally when they aren't optional.
* sca3000
  - whitespace cleanup.
* st_sensors
  - fetch and enable regulators unconditionally rather than having them
    supported as optional regulators (missunderstanding on my part amongst
    others a while back)
  - followup to previous patch fixes error checking on the regulators.
  - mark symbols static where possible.
  - use the 'is it my trigger' help function.  This prevents the odd case
    of another device triggering from the st-sensors trigger whilst the
    st-sensors trigger is itself not using it but rather using say an hrtimer.
* ti-ads1015
  - add missing of_node_put.
* vz89x
  - rework to all support of new devices.
  - prevent reading of a corrupted buffer.
  - fixup a return value of 0/1 in a bool returning function.

Address updates
- Vlad Dogaru email address change.

2 files changed, 61 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt b/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt
new file mode 100644
index 000000000000..049a1d36f013
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ti-adc12138.txt
@@ -0,0 +1,37 @@
+* Texas Instruments' ADC12130/ADC12132/ADC12138
+
+Required properties:
+ - compatible: Should be one of
+	* "ti,adc12130"
+	* "ti,adc12132"
+	* "ti,adc12138"
+ - reg: SPI chip select number for the device
+ - interrupts: Should contain interrupt for EOC (end of conversion)
+ - clocks: phandle to conversion clock input
+ - spi-max-frequency: Definision as per
+	Documentation/devicetree/bindings/spi/spi-bus.txt
+ - vref-p-supply: The regulator supply for positive analog voltage reference
+
+Optional properties:
+ - vref-n-supply: The regulator supply for negative analog voltage reference
+	(Note that this must not go below GND or exceed vref-p)
+	If not specified, this is assumed to be analog ground.
+ - ti,acquisition-time: The number of conversion clock periods for the S/H's
+	acquisition time.  Should be one of 6, 10, 18, 34.  If not specified,
+	default value of 10 is used.
+	For high source impedances, this value can be increased to 18 or 34.
+	For less ADC accuracy and/or slower CCLK frequencies this value may be
+	decreased to 6.  See section 6.0 INPUT SOURCE RESISTANCE in the
+	datasheet for details.
+
+Example:
+adc@0 {
+	compatible = "ti,adc12138";
+	reg = <0>;
+	interrupts = <28 IRQ_TYPE_EDGE_RISING>;
+	interrupt-parent = <&gpio1>;
+	clocks = <&cclk>;
+	vref-p-supply = <&ldo4_reg>;
+	spi-max-frequency = <5000000>;
+	ti,acquisition-time = <6>;
+};
diff --git a/Documentation/devicetree/bindings/iio/proximity/sx9500.txt b/Documentation/devicetree/bindings/iio/proximity/sx9500.txt
new file mode 100644
index 000000000000..b301dd2b35da
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/proximity/sx9500.txt
@@ -0,0 +1,24 @@
+Semtech's SX9500 capacitive proximity button device driver
+
+Required properties:
+	- compatible: must be "semtech,sx9500"
+	- reg: i2c address where to find the device
+	- interrupt-parent : should be the phandle for the interrupt controller
+	- interrupts : the sole interrupt generated by the device
+
+	Refer to interrupt-controller/interrupts.txt for generic
+	interrupt client node bindings.
+
+Optional properties:
+	- reset-gpios: Reference to the GPIO connected to the device's active
+	  low reset pin.
+
+Example:
+
+sx9500@28 {
+	compatible = "semtech,sx9500";
+	reg = <0x28>;
+	interrupt-parent = <&gpio2>;
+	interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+	reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+};