[media] cec: s5p-cec: Add s5p-cec driver

Add CEC interface driver present in the Samsung Exynos range of
SoCs.

The following files were based on work by SangPil Moon:
- exynos_hdmi_cec.h
- exynos_hdmi_cecctl.c

Signed-off-by: Kamil Debski <kamil@wypas.org>
Signed-off-by: Hans Verkuil <hans.verkuil@cisco.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@s-opensource.com>

1 files changed, 31 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/media/s5p-cec.txt b/Documentation/devicetree/bindings/media/s5p-cec.txt
new file mode 100644
index 000000000000..925ab4d72eaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/s5p-cec.txt
@@ -0,0 +1,31 @@
+* Samsung HDMI CEC driver
+
+The HDMI CEC module is present is Samsung SoCs and its purpose is to
+handle communication between HDMI connected devices over the CEC bus.
+
+Required properties:
+  - compatible : value should be following
+	"samsung,s5p-cec"
+
+  - reg : Physical base address of the IP registers and length of memory
+	  mapped region.
+
+  - interrupts : HDMI CEC interrupt number to the CPU.
+  - clocks : from common clock binding: handle to HDMI CEC clock.
+  - clock-names : from common clock binding: must contain "hdmicec",
+		  corresponding to entry in the clocks property.
+  - samsung,syscon-phandle - phandle to the PMU system controller
+
+Example:
+
+hdmicec: cec@100B0000 {
+	compatible = "samsung,s5p-cec";
+	reg = <0x100B0000 0x200>;
+	interrupts = <0 114 0>;
+	clocks = <&clock CLK_HDMI_CEC>;
+	clock-names = "hdmicec";
+	samsung,syscon-phandle = <&pmu_system_controller>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_cec>;
+	status = "okay";
+};