diff options
author | H. Peter Anvin <hpa@linux.intel.com> | 2012-01-19 21:56:50 +0100 |
---|---|---|
committer | H. Peter Anvin <hpa@linux.intel.com> | 2012-01-19 21:56:50 +0100 |
commit | 282f445a779ed76fca9884fe377bf56a3088b208 (patch) | |
tree | d9abcf526baee0100672851e0a8894c19e762a39 /Documentation/devicetree/bindings/mtd/gpio-control-nand.txt | |
parent | x86, tsc: Fix SMI induced variation in quick_pit_calibrate() (diff) | |
parent | uml: fix compile for x86-64 (diff) | |
download | linux-282f445a779ed76fca9884fe377bf56a3088b208.tar.xz linux-282f445a779ed76fca9884fe377bf56a3088b208.zip |
Merge remote-tracking branch 'linus/master' into x86/urgent
Diffstat (limited to 'Documentation/devicetree/bindings/mtd/gpio-control-nand.txt')
-rw-r--r-- | Documentation/devicetree/bindings/mtd/gpio-control-nand.txt | 44 |
1 files changed, 44 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt new file mode 100644 index 000000000000..719f4dc58df7 --- /dev/null +++ b/Documentation/devicetree/bindings/mtd/gpio-control-nand.txt @@ -0,0 +1,44 @@ +GPIO assisted NAND flash + +The GPIO assisted NAND flash uses a memory mapped interface to +read/write the NAND commands and data and GPIO pins for the control +signals. + +Required properties: +- compatible : "gpio-control-nand" +- reg : should specify localbus chip select and size used for the chip. The + resource describes the data bus connected to the NAND flash and all accesses + are made in native endianness. +- #address-cells, #size-cells : Must be present if the device has sub-nodes + representing partitions. +- gpios : specifies the gpio pins to control the NAND device. nwp is an + optional gpio and may be set to 0 if not present. + +Optional properties: +- bank-width : Width (in bytes) of the device. If not present, the width + defaults to 1 byte. +- chip-delay : chip dependent delay for transferring data from array to + read registers (tR). If not present then a default of 20us is used. +- gpio-control-nand,io-sync-reg : A 64-bit physical address for a read + location used to guard against bus reordering with regards to accesses to + the GPIO's and the NAND flash data bus. If present, then after changing + GPIO state and before and after command byte writes, this register will be + read to ensure that the GPIO accesses have completed. + +Examples: + +gpio-nand@1,0 { + compatible = "gpio-control-nand"; + reg = <1 0x0000 0x2>; + #address-cells = <1>; + #size-cells = <1>; + gpios = <&banka 1 0 /* rdy */ + &banka 2 0 /* nce */ + &banka 3 0 /* ale */ + &banka 4 0 /* cle */ + 0 /* nwp */>; + + partition@0 { + ... + }; +}; |