Merge tag 'phy-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy

Pull phy updates from Vinod Koul:
 "As usual a couple of new drivers, a bunch of new device support and
  few updates to existing drivers

  New Support:
   - Starfive dphy rx, JH7110 usb and pcie support
   - Rockchip rv1126 inno-dsi phy, rk3588 usb and pcie support
   - Qualcomm sa8775p PCIe support, M31 USB PHY driver
   - Samsung Exynos850 usb support

  Updates:
   - Mediatek dsi driver clock updates
   - Qualcomm sm8150 combo phy with reworking of qmp pcie driver
   - Xilinx zynqmp runtime PM support"

* tag 'phy-for-6.6' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (83 commits)
  phy: exynos5-usbdrd: Add Exynos850 support
  phy: exynos5-usbdrd: Add 26MHz ref clk support
  phy: exynos5-usbdrd: Make it possible to pass custom phy ops
  dt-bindings: phy: samsung,usb3-drd-phy: Add Exynos850 support
  phy: qcom-qmp-combo: fix clock probing
  phy: qcom-qmp-pcie: support SM8150 PCIe QMP PHYs
  phy: qcom-qmp-pcie: populate offsets configuration
  phy: qcom-qmp-pcie: simplify clock handling
  phy: qcom-qmp-pcie: keep offset tables sorted
  phy: qcom-qmp-pcie: drop ln_shrd from v5_20 config
  dt-bindings: phy: qcom,qmp-pcie: describe SM8150 PCIe PHYs
  dt-bindings: phy: migrate QMP PCIe PHY bindings to qcom,sc8280xp-qmp-pcie-phy.yaml
  phy: fsl-imx8mq-usb: add dev_err_probe if getting vbus failed
  phy: qcom: Introduce M31 USB PHY driver
  dt-bindings: phy: qcom,m31: Document qcom,m31 USB phy
  phy: rockchip: inno-dsidphy: Add rv1126 support
  dt-bindings: phy: rockchip-inno-dsidphy: Document rv1126
  dt-bindings: phy: mediatek,tphy: allow simple nodename pattern
  phy: amlogic: meson-g12a-usb2: fix Wvoid-pointer-to-enum-cast warning
  phy: marvell pxa-usb: fix Wvoid-pointer-to-enum-cast warning
  ...

18 files changed, 565 insertions, 852 deletions

diff --git a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
index 230a17f24966..2bb91542e984 100644
--- a/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
+++ b/Documentation/devicetree/bindings/phy/mediatek,tphy.yaml
@@ -64,7 +64,7 @@ description: |
 
 properties:
   $nodename:
-    pattern: "^t-phy@[0-9a-f]+$"
+    pattern: "^t-phy(@[0-9a-f]+)?$"
 
   compatible:
     oneOf:
diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-hsphy.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-hsphy.yaml
new file mode 100644
index 000000000000..2671a048c926
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,ipq5332-usb-hsphy.yaml
@@ -0,0 +1,59 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,ipq5332-usb-hsphy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: M31 USB PHY
+
+maintainers:
+  - Sricharan Ramabadhran <quic_srichara@quicinc.com>
+  - Varadarajan Narayanan <quic_varada@quicinc.com>
+
+description:
+  USB M31 PHY (https://www.m31tech.com) found in Qualcomm
+  IPQ5018, IPQ5332 SoCs.
+
+properties:
+  compatible:
+    items:
+      - const: qcom,ipq5332-usb-hsphy
+
+  "#phy-cells":
+    const: 0
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  clock-names:
+    items:
+      - const: cfg_ahb
+
+  resets:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Phandle to 5V regulator supply to PHY digital circuit.
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,ipq5332-gcc.h>
+    usb-phy@7b000 {
+        compatible = "qcom,ipq5332-usb-hsphy";
+        reg = <0x0007b000 0x12c>;
+
+        clocks = <&gcc GCC_USB0_PHY_CFG_AHB_CLK>;
+        clock-names = "cfg_ahb";
+
+        #phy-cells = <0>;
+
+        resets = <&gcc GCC_QUSB2_0_PHY_BCR>;
+
+        vdd-supply = <&regulator_fixed_5p0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
index 3d42ee3901a1..5073007267ad 100644
--- a/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,ipq8074-qmp-pcie-phy.yaml
@@ -13,287 +13,79 @@ description:
   QMP PHY controller supports physical layer functionality for a number of
   controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
 
-  Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
-  qcom,sc8280xp-qmp-pcie-phy.yaml.
-
 properties:
   compatible:
     enum:
       - qcom,ipq6018-qmp-pcie-phy
       - qcom,ipq8074-qmp-gen3-pcie-phy
       - qcom,ipq8074-qmp-pcie-phy
-      - qcom,msm8998-qmp-pcie-phy
-      - qcom,sc8180x-qmp-pcie-phy
-      - qcom,sdm845-qhp-pcie-phy
-      - qcom,sdm845-qmp-pcie-phy
-      - qcom,sdx55-qmp-pcie-phy
-      - qcom,sm8250-qmp-gen3x1-pcie-phy
-      - qcom,sm8250-qmp-gen3x2-pcie-phy
-      - qcom,sm8250-qmp-modem-pcie-phy
-      - qcom,sm8450-qmp-gen3x1-pcie-phy
-      - qcom,sm8450-qmp-gen4x2-pcie-phy
 
   reg:
     items:
       - description: serdes
 
-  "#address-cells":
-    enum: [ 1, 2 ]
-
-  "#size-cells":
-    enum: [ 1, 2 ]
-
-  ranges: true
-
   clocks:
-    minItems: 2
-    maxItems: 4
+    maxItems: 3
 
   clock-names:
-    minItems: 2
-    maxItems: 4
+    items:
+      - const: aux
+      - const: cfg_ahb
+      - const: pipe
 
   resets:
-    minItems: 1
     maxItems: 2
 
   reset-names:
-    minItems: 1
-    maxItems: 2
-
-  vdda-phy-supply: true
-
-  vdda-pll-supply: true
-
-  vddp-ref-clk-supply: true
-
-patternProperties:
-  "^phy@[0-9a-f]+$":
-    type: object
-    description: single PHY-provider child node
-    properties:
-      reg:
-        minItems: 3
-        maxItems: 6
-
-      clocks:
-        items:
-          - description: PIPE clock
-
-      clock-names:
-        deprecated: true
-        items:
-          - const: pipe0
-
-      "#clock-cells":
-        const: 0
-
-      clock-output-names:
-        maxItems: 1
+    items:
+      - const: phy
+      - const: common
 
-      "#phy-cells":
-        const: 0
+  "#clock-cells":
+    const: 0
 
-    required:
-      - reg
-      - clocks
-      - "#clock-cells"
-      - clock-output-names
-      - "#phy-cells"
+  clock-output-names:
+    maxItems: 1
 
-    additionalProperties: false
+  "#phy-cells":
+    const: 0
 
 required:
   - compatible
   - reg
-  - "#address-cells"
-  - "#size-cells"
-  - ranges
   - clocks
   - clock-names
   - resets
   - reset-names
+  - "#clock-cells"
+  - clock-output-names
+  - "#phy-cells"
 
 additionalProperties: false
 
-allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,msm8998-qmp-pcie-phy
-    then:
-      properties:
-        clocks:
-          maxItems: 3
-        clock-names:
-          items:
-            - const: aux
-            - const: cfg_ahb
-            - const: ref
-        resets:
-          maxItems: 2
-        reset-names:
-          items:
-            - const: phy
-            - const: common
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,ipq6018-qmp-pcie-phy
-              - qcom,ipq8074-qmp-gen3-pcie-phy
-              - qcom,ipq8074-qmp-pcie-phy
-    then:
-      properties:
-        clocks:
-          maxItems: 2
-        clock-names:
-          items:
-            - const: aux
-            - const: cfg_ahb
-        resets:
-          maxItems: 2
-        reset-names:
-          items:
-            - const: phy
-            - const: common
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sc8180x-qmp-pcie-phy
-              - qcom,sdm845-qhp-pcie-phy
-              - qcom,sdm845-qmp-pcie-phy
-              - qcom,sdx55-qmp-pcie-phy
-              - qcom,sm8250-qmp-gen3x1-pcie-phy
-              - qcom,sm8250-qmp-gen3x2-pcie-phy
-              - qcom,sm8250-qmp-modem-pcie-phy
-              - qcom,sm8450-qmp-gen3x1-pcie-phy
-              - qcom,sm8450-qmp-gen4x2-pcie-phy
-    then:
-      properties:
-        clocks:
-          maxItems: 4
-        clock-names:
-          items:
-            - const: aux
-            - const: cfg_ahb
-            - const: ref
-            - const: refgen
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: phy
-      required:
-        - vdda-phy-supply
-        - vdda-pll-supply
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sc8180x-qmp-pcie-phy
-              - qcom,sm8250-qmp-gen3x2-pcie-phy
-              - qcom,sm8250-qmp-modem-pcie-phy
-              - qcom,sm8450-qmp-gen4x2-pcie-phy
-    then:
-      patternProperties:
-        "^phy@[0-9a-f]+$":
-          properties:
-            reg:
-              items:
-                - description: TX lane 1
-                - description: RX lane 1
-                - description: PCS
-                - description: TX lane 2
-                - description: RX lane 2
-                - description: PCS_MISC
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sdm845-qmp-pcie-phy
-              - qcom,sdx55-qmp-pcie-phy
-              - qcom,sm8250-qmp-gen3x1-pcie-phy
-              - qcom,sm8450-qmp-gen3x1-pcie-phy
-    then:
-      patternProperties:
-        "^phy@[0-9a-f]+$":
-          properties:
-            reg:
-              items:
-                - description: TX
-                - description: RX
-                - description: PCS
-                - description: PCS_MISC
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,ipq6018-qmp-pcie-phy
-              - qcom,ipq8074-qmp-pcie-phy
-              - qcom,msm8998-qmp-pcie-phy
-              - qcom,sdm845-qhp-pcie-phy
-    then:
-      patternProperties:
-        "^phy@[0-9a-f]+$":
-          properties:
-            reg:
-              items:
-                - description: TX
-                - description: RX
-                - description: PCS
-
 examples:
   - |
-    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
-    phy-wrapper@1c0e000 {
-        compatible = "qcom,sm8250-qmp-gen3x2-pcie-phy";
-        reg = <0x01c0e000 0x1c0>;
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges = <0x0 0x01c0e000 0x1000>;
-
-        clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
-                 <&gcc GCC_PCIE_1_CFG_AHB_CLK>,
-                 <&gcc GCC_PCIE_WIGIG_CLKREF_EN>,
-                 <&gcc GCC_PCIE1_PHY_REFGEN_CLK>;
-        clock-names = "aux", "cfg_ahb", "ref", "refgen";
-
-        resets = <&gcc GCC_PCIE_1_PHY_BCR>;
-        reset-names = "phy";
+    #include <dt-bindings/clock/qcom,gcc-ipq6018.h>
+    #include <dt-bindings/reset/qcom,gcc-ipq6018.h>
 
-        vdda-phy-supply = <&vreg_l10c_0p88>;
-        vdda-pll-supply = <&vreg_l6b_1p2>;
+    phy@84000 {
+        compatible = "qcom,ipq6018-qmp-pcie-phy";
+        reg = <0x0 0x00084000 0x0 0x1000>;
 
-        phy@200 {
-            reg = <0x200 0x170>,
-                  <0x400 0x200>,
-                  <0xa00 0x1f0>,
-                  <0x600 0x170>,
-                  <0x800 0x200>,
-                  <0xe00 0xf4>;
+        clocks = <&gcc GCC_PCIE0_AUX_CLK>,
+                 <&gcc GCC_PCIE0_AHB_CLK>,
+                 <&gcc GCC_PCIE0_PIPE_CLK>;
+        clock-names = "aux",
+                      "cfg_ahb",
+                      "pipe";
 
-            clocks = <&gcc GCC_PCIE_1_PIPE_CLK>;
+        clock-output-names = "gcc_pcie0_pipe_clk_src";
+        #clock-cells = <0>;
 
-            #clock-cells = <0>;
-            clock-output-names = "pcie_1_pipe_clk";
+        #phy-cells = <0>;
 
-            #phy-cells = <0>;
-        };
+        resets = <&gcc GCC_PCIE0_PHY_BCR>,
+                 <&gcc GCC_PCIE0PHY_PHY_BCR>;
+        reset-names = "phy",
+                      "common";
     };
diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml
deleted file mode 100644
index 881ba543fd46..000000000000
--- a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-ufs-phy.yaml
+++ /dev/null
@@ -1,228 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/phy/qcom,msm8996-qmp-ufs-phy.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm QMP PHY controller (UFS, MSM8996)
-
-maintainers:
-  - Vinod Koul <vkoul@kernel.org>
-
-description:
-  QMP PHY controller supports physical layer functionality for a number of
-  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
-
-  Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
-  qcom,sc8280xp-qmp-ufs-phy.yaml.
-
-properties:
-  compatible:
-    enum:
-      - qcom,msm8996-qmp-ufs-phy
-      - qcom,msm8998-qmp-ufs-phy
-      - qcom,sc8180x-qmp-ufs-phy
-      - qcom,sdm845-qmp-ufs-phy
-      - qcom,sm6115-qmp-ufs-phy
-      - qcom,sm6350-qmp-ufs-phy
-      - qcom,sm8150-qmp-ufs-phy
-      - qcom,sm8250-qmp-ufs-phy
-      - qcom,sm8350-qmp-ufs-phy
-      - qcom,sm8450-qmp-ufs-phy
-
-  reg:
-    items:
-      - description: serdes
-
-  "#address-cells":
-    enum: [ 1, 2 ]
-
-  "#size-cells":
-    enum: [ 1, 2 ]
-
-  ranges: true
-
-  clocks:
-    minItems: 1
-    maxItems: 3
-
-  clock-names:
-    minItems: 1
-    maxItems: 3
-
-  power-domains:
-    maxItems: 1
-
-  resets:
-    maxItems: 1
-
-  reset-names:
-    items:
-      - const: ufsphy
-
-  vdda-phy-supply: true
-
-  vdda-pll-supply: true
-
-  vddp-ref-clk-supply: true
-
-patternProperties:
-  "^phy@[0-9a-f]+$":
-    type: object
-    description: single PHY-provider child node
-    properties:
-      reg:
-        minItems: 3
-        maxItems: 6
-
-      "#clock-cells":
-        const: 1
-
-      "#phy-cells":
-        const: 0
-
-    required:
-      - reg
-      - "#phy-cells"
-
-    additionalProperties: false
-
-required:
-  - compatible
-  - reg
-  - "#address-cells"
-  - "#size-cells"
-  - ranges
-  - clocks
-  - clock-names
-  - resets
-  - reset-names
-  - vdda-phy-supply
-  - vdda-pll-supply
-
-additionalProperties: false
-
-allOf:
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,msm8996-qmp-ufs-phy
-    then:
-      properties:
-        clocks:
-          maxItems: 1
-        clock-names:
-          items:
-            - const: ref
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,msm8998-qmp-ufs-phy
-              - qcom,sc8180x-qmp-ufs-phy
-              - qcom,sdm845-qmp-ufs-phy
-              - qcom,sm6115-qmp-ufs-phy
-              - qcom,sm6350-qmp-ufs-phy
-              - qcom,sm8150-qmp-ufs-phy
-              - qcom,sm8250-qmp-ufs-phy
-    then:
-      properties:
-        clocks:
-          maxItems: 2
-        clock-names:
-          items:
-            - const: ref
-            - const: ref_aux
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sm8450-qmp-ufs-phy
-    then:
-      properties:
-        clocks:
-          maxItems: 3
-        clock-names:
-          items:
-            - const: ref
-            - const: ref_aux
-            - const: qref
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,msm8998-qmp-ufs-phy
-              - qcom,sc8180x-qmp-ufs-phy
-              - qcom,sdm845-qmp-ufs-phy
-              - qcom,sm6350-qmp-ufs-phy
-              - qcom,sm8150-qmp-ufs-phy
-              - qcom,sm8250-qmp-ufs-phy
-              - qcom,sm8350-qmp-ufs-phy
-              - qcom,sm8450-qmp-ufs-phy
-    then:
-      patternProperties:
-        "^phy@[0-9a-f]+$":
-          properties:
-            reg:
-              items:
-                - description: TX lane 1
-                - description: RX lane 1
-                - description: PCS
-                - description: TX lane 2
-                - description: RX lane 2
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,msm8996-qmp-ufs-phy
-              - qcom,sm6115-qmp-ufs-phy
-    then:
-      patternProperties:
-        "^phy@[0-9a-f]+$":
-          properties:
-            reg:
-              items:
-                - description: TX
-                - description: RX
-                - description: PCS
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,gcc-sm8250.h>
-    #include <dt-bindings/clock/qcom,rpmh.h>
-
-    phy-wrapper@1d87000 {
-        compatible = "qcom,sm8250-qmp-ufs-phy";
-        reg = <0x01d87000 0x1c0>;
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges = <0x0 0x01d87000 0x1000>;
-
-        clocks = <&rpmhcc RPMH_CXO_CLK>, <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
-        clock-names = "ref", "ref_aux";
-
-        resets = <&ufs_mem_hc 0>;
-        reset-names = "ufsphy";
-
-        vdda-phy-supply = <&vreg_l6b>;
-        vdda-pll-supply = <&vreg_l3b>;
-
-        phy@400 {
-            reg = <0x400 0x108>,
-                  <0x600 0x1e0>,
-                  <0xc00 0x1dc>,
-                  <0x800 0x108>,
-                  <0xa00 0x1e0>;
-            #phy-cells = <0>;
-        };
-    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml
index 4c96dab5b9e3..827109d37041 100644
--- a/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,msm8996-qmp-usb3-phy.yaml
@@ -23,25 +23,16 @@ properties:
       - qcom,ipq8074-qmp-usb3-phy
       - qcom,msm8996-qmp-usb3-phy
       - qcom,msm8998-qmp-usb3-phy
-      - qcom,sc7180-qmp-usb3-phy
-      - qcom,sc8180x-qmp-usb3-phy
-      - qcom,sdm845-qmp-usb3-phy
       - qcom,sdm845-qmp-usb3-uni-phy
       - qcom,sdx55-qmp-usb3-uni-phy
       - qcom,sdx65-qmp-usb3-uni-phy
-      - qcom,sm8150-qmp-usb3-phy
       - qcom,sm8150-qmp-usb3-uni-phy
-      - qcom,sm8250-qmp-usb3-phy
       - qcom,sm8250-qmp-usb3-uni-phy
-      - qcom,sm8350-qmp-usb3-phy
       - qcom,sm8350-qmp-usb3-uni-phy
-      - qcom,sm8450-qmp-usb3-phy
 
   reg:
-    minItems: 1
     items:
       - description: serdes
-      - description: DP_COM
 
   "#address-cells":
     enum: [ 1, 2 ]
@@ -131,28 +122,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,sc7180-qmp-usb3-phy
-    then:
-      properties:
-        clocks:
-          maxItems: 4
-        clock-names:
-          items:
-            - const: aux
-            - const: cfg_ahb
-            - const: ref
-            - const: com_aux
-        resets:
-          maxItems: 1
-        reset-names:
-          items:
-            - const: phy
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
               - qcom,sdm845-qmp-usb3-uni-phy
     then:
       properties:
@@ -202,7 +171,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,sm8150-qmp-usb3-phy
               - qcom,sm8150-qmp-usb3-uni-phy
               - qcom,sm8250-qmp-usb3-uni-phy
               - qcom,sm8350-qmp-usb3-uni-phy
@@ -228,51 +196,6 @@ allOf:
         compatible:
           contains:
             enum:
-              - qcom,sm8250-qmp-usb3-phy
-              - qcom,sm8350-qmp-usb3-phy
-    then:
-      properties:
-        clocks:
-          maxItems: 3
-        clock-names:
-          items:
-            - const: aux
-            - const: ref_clk_src
-            - const: com_aux
-        resets:
-          maxItems: 2
-        reset-names:
-          items:
-            - const: phy
-            - const: common
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
-              - qcom,sdm845-qmp-usb3-phy
-              - qcom,sm8150-qmp-usb3-phy
-              - qcom,sm8350-qmp-usb3-phy
-              - qcom,sm8450-qmp-usb3-phy
-    then:
-      patternProperties:
-        "^phy@[0-9a-f]+$":
-          properties:
-            reg:
-              items:
-                - description: TX lane 1
-                - description: RX lane 1
-                - description: PCS
-                - description: TX lane 2
-                - description: RX lane 2
-                - description: PCS_MISC
-
-  - if:
-      properties:
-        compatible:
-          contains:
-            enum:
               - qcom,msm8998-qmp-usb3-phy
     then:
       patternProperties:
@@ -293,12 +216,9 @@ allOf:
             enum:
               - qcom,ipq6018-qmp-usb3-phy
               - qcom,ipq8074-qmp-usb3-phy
-              - qcom,sc7180-qmp-usb3-phy
-              - qcom,sc8180x-qmp-usb3-phy
               - qcom,sdx55-qmp-usb3-uni-phy
               - qcom,sdx65-qmp-usb3-uni-phy
               - qcom,sm8150-qmp-usb3-uni-phy
-              - qcom,sm8250-qmp-usb3-phy
     then:
       patternProperties:
         "^phy@[0-9a-f]+$":
diff --git a/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-pcie-phy.yaml
new file mode 100644
index 000000000000..d05eef0e1ccd
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/qcom,msm8998-qmp-pcie-phy.yaml
@@ -0,0 +1,97 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/qcom,msm8998-qmp-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm QMP PHY controller (PCIe, MSM8998)
+
+maintainers:
+  - Vinod Koul <vkoul@kernel.org>
+
+description:
+  The QMP PHY controller supports physical layer functionality for a number of
+  controllers on Qualcomm chipsets, such as, PCIe, UFS, and USB.
+
+properties:
+  compatible:
+    const: qcom,msm8998-qmp-pcie-phy
+
+  reg:
+    items:
+      - description: serdes
+
+  clocks:
+    maxItems: 4
+
+  clock-names:
+    items:
+      - const: aux
+      - const: cfg_ahb
+      - const: ref
+      - const: pipe
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy
+      - const: common
+
+  vdda-phy-supply: true
+
+  vdda-pll-supply: true
+
+  "#clock-cells":
+    const: 0
+
+  clock-output-names:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - vdda-phy-supply
+  - vdda-pll-supply
+  - "#clock-cells"
+  - clock-output-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/qcom,gcc-msm8998.h>
+
+    phy@1c18000 {
+        compatible = "qcom,msm8998-qmp-pcie-phy";
+        reg = <0x01c06000 0x1000>;
+
+        clocks = <&gcc GCC_PCIE_PHY_AUX_CLK>,
+                 <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
+                 <&gcc GCC_PCIE_CLKREF_CLK>,
+                 <&gcc GCC_PCIE_0_PIPE_CLK>;
+        clock-names = "aux",
+                      "cfg_ahb",
+                      "ref",
+                      "pipe";
+
+        clock-output-names = "pcie_0_pipe_clk_src";
+        #clock-cells = <0>;
+
+        #phy-cells = <0>;
+
+        resets = <&gcc GCC_PCIE_0_PHY_BCR>, <&gcc GCC_PCIE_PHY_BCR>;
+        reset-names = "phy", "common";
+
+        vdda-phy-supply = <&vreg_l1a_0p875>;
+        vdda-pll-supply = <&vreg_l2a_1p2>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
deleted file mode 100644
index d30734338888..000000000000
--- a/Documentation/devicetree/bindings/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml
+++ /dev/null
@@ -1,282 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
-
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/phy/qcom,sc7180-qmp-usb3-dp-phy.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Qualcomm QMP USB3 DP PHY controller (SC7180)
-
-description:
-  The QMP PHY controller supports physical layer functionality for a number of
-  controllers on Qualcomm chipsets, such as, PCIe, UFS and USB.
-
-  Note that these bindings are for SoCs up to SC8180X. For newer SoCs, see
-  qcom,sc8280xp-qmp-usb43dp-phy.yaml.
-
-maintainers:
-  - Wesley Cheng <quic_wcheng@quicinc.com>
-
-properties:
-  compatible:
-    oneOf:
-      - enum:
-          - qcom,sc7180-qmp-usb3-dp-phy
-          - qcom,sc8180x-qmp-usb3-dp-phy
-          - qcom,sdm845-qmp-usb3-dp-phy
-          - qcom,sm8250-qmp-usb3-dp-phy
-      - items:
-          - enum:
-              - qcom,sc7280-qmp-usb3-dp-phy
-          - const: qcom,sm8250-qmp-usb3-dp-phy
-
-  reg:
-    items:
-      - description: Address and length of PHY's USB serdes block.
-      - description: Address and length of the DP_COM control block.
-      - description: Address and length of PHY's DP serdes block.
-
-  reg-names:
-    items:
-      - const: usb
-      - const: dp_com
-      - const: dp
-
-  "#address-cells":
-    enum: [ 1, 2 ]
-
-  "#size-cells":
-    enum: [ 1, 2 ]
-
-  ranges: true
-
-  clocks:
-    minItems: 3
-    maxItems: 4
-
-  clock-names:
-    minItems: 3
-    maxItems: 4
-
-  power-domains:
-    maxItems: 1
-
-  orientation-switch:
-    description: Flag the port as possible handler of orientation switching
-    type: boolean
-
-  resets:
-    items:
-      - description: reset of phy block.
-      - description: phy common block reset.
-
-  reset-names:
-    items:
-      - const: phy
-      - const: common
-
-  vdda-phy-supply:
-    description:
-      Phandle to a regulator supply to PHY core block.
-
-  vdda-pll-supply:
-    description:
-      Phandle to 1.8V regulator supply to PHY refclk pll block.
-
-  vddp-ref-clk-supply:
-    description:
-      Phandle to a regulator supply to any specific refclk pll block.
-
-# Required nodes:
-patternProperties:
-  "^usb3-phy@[0-9a-f]+$":
-    type: object
-    additionalProperties: false
-    description:
-      The USB3 PHY.
-
-    properties:
-      reg:
-        items:
-          - description: Address and length of TX.
-          - description: Address and length of RX.
-          - description: Address and length of PCS.
-          - description: Address and length of TX2.
-          - description: Address and length of RX2.
-          - description: Address and length of pcs_misc.
-
-      clocks:
-        items:
-          - description: pipe clock
-
-      clock-names:
-        deprecated: true
-        items:
-          - const: pipe0
-
-      clock-output-names:
-        items:
-          - const: usb3_phy_pipe_clk_src
-
-      '#clock-cells':
-        const: 0
-
-      '#phy-cells':
-        const: 0
-
-    required:
-      - reg
-      - clocks
-      - '#clock-cells'
-      - '#phy-cells'
-
-  "^dp-phy@[0-9a-f]+$":
-    type: object
-    additionalProperties: false
-    description:
-      The DP PHY.
-
-    properties:
-      reg:
-        items:
-          - description: Address and length of TX.
-          - description: Address and length of RX.
-          - description: Address and length of PCS.
-          - description: Address and length of TX2.
-          - description: Address and length of RX2.
-
-      '#clock-cells':
-        const: 1
-
-      '#phy-cells':
-        const: 0
-
-    required:
-      - reg
-      - '#clock-cells'
-      - '#phy-cells'
-
-required:
-  - compatible
-  - reg
-  - "#address-cells"
-  - "#size-cells"
-  - ranges
-  - clocks
-  - clock-names
-  - resets
-  - reset-names
-  - vdda-phy-supply
-  - vdda-pll-supply
-
-allOf:
-  - if:
-      properties:
-        compatible:
-          enum:
-            - qcom,sc7180-qmp-usb3-dp-phy
-            - qcom,sdm845-qmp-usb3-dp-phy
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Phy aux clock
-            - description: Phy config clock
-            - description: 19.2 MHz ref clk
-            - description: Phy common block aux clock
-        clock-names:
-          items:
-            - const: aux
-            - const: cfg_ahb
-            - const: ref
-            - const: com_aux
-
-  - if:
-      properties:
-        compatible:
-          enum:
-            - qcom,sc8180x-qmp-usb3-dp-phy
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Phy aux clock
-            - description: 19.2 MHz ref clk
-            - description: Phy common block aux clock
-        clock-names:
-          items:
-            - const: aux
-            - const: ref
-            - const: com_aux
-
-  - if:
-      properties:
-        compatible:
-          enum:
-            - qcom,sm8250-qmp-usb3-dp-phy
-    then:
-      properties:
-        clocks:
-          items:
-            - description: Phy aux clock
-            - description: Board XO source
-            - description: Phy common block aux clock
-        clock-names:
-          items:
-            - const: aux
-            - const: ref_clk_src
-            - const: com_aux
-
-additionalProperties: false
-
-examples:
-  - |
-    #include <dt-bindings/clock/qcom,gcc-sdm845.h>
-    usb_1_qmpphy: phy-wrapper@88e9000 {
-        compatible = "qcom,sdm845-qmp-usb3-dp-phy";
-        reg = <0x088e9000 0x18c>,
-              <0x088e8000 0x10>,
-              <0x088ea000 0x40>;
-        reg-names = "usb", "dp_com", "dp";
-        #address-cells = <1>;
-        #size-cells = <1>;
-        ranges = <0x0 0x088e9000 0x2000>;
-
-        clocks = <&gcc GCC_USB3_PRIM_PHY_AUX_CLK>,
-                 <&gcc GCC_USB_PHY_CFG_AHB2PHY_CLK>,
-                 <&gcc GCC_USB3_PRIM_CLKREF_CLK>,
-                 <&gcc GCC_USB3_PRIM_PHY_COM_AUX_CLK>;
-        clock-names = "aux", "cfg_ahb", "ref", "com_aux";
-
-        resets = <&gcc GCC_USB3_PHY_PRIM_BCR>,
-                 <&gcc GCC_USB3_DP_PHY_PRIM_BCR>;
-        reset-names = "phy", "common";
-
-        vdda-phy-supply = <&vdda_usb2_ss_1p2>;
-        vdda-pll-supply = <&vdda_usb2_ss_core>;
-
-        orientation-switch;
-
-        usb3-phy@200 {
-            reg = <0x200 0x128>,
-                  <0x400 0x200>,
-                  <0xc00 0x218>,
-                  <0x600 0x128>,
-                  <0x800 0x200>,
-                  <0xa00 0x100>;
-            #clock-cells = <0>;
-            #phy-cells = <0>;
-            clocks = <&gcc GCC_USB3_PRIM_PHY_PIPE_CLK>;
-            clock-output-names = "usb3_phy_pipe_clk_src";
-        };
-
-        dp-phy@88ea200 {
-            reg = <0xa200 0x200>,
-                  <0xa400 0x200>,
-                  <0xaa00 0x200>,
-                  <0xa600 0x200>,
-                  <0xa800 0x200>;
-            #clock-cells = <1>;
-            #phy-cells = <0>;
-        };
-    };
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
index a0407fc79563..2c3d6553a7ba 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-pcie-phy.yaml
@@ -16,11 +16,24 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,sa8775p-qmp-gen4x2-pcie-phy
+      - qcom,sa8775p-qmp-gen4x4-pcie-phy
+      - qcom,sc8180x-qmp-pcie-phy
       - qcom,sc8280xp-qmp-gen3x1-pcie-phy
       - qcom,sc8280xp-qmp-gen3x2-pcie-phy
       - qcom,sc8280xp-qmp-gen3x4-pcie-phy
+      - qcom,sdm845-qhp-pcie-phy
+      - qcom,sdm845-qmp-pcie-phy
+      - qcom,sdx55-qmp-pcie-phy
       - qcom,sdx65-qmp-gen4x2-pcie-phy
+      - qcom,sm8150-qmp-gen3x1-pcie-phy
+      - qcom,sm8150-qmp-gen3x2-pcie-phy
+      - qcom,sm8250-qmp-gen3x1-pcie-phy
+      - qcom,sm8250-qmp-gen3x2-pcie-phy
+      - qcom,sm8250-qmp-modem-pcie-phy
       - qcom,sm8350-qmp-gen3x1-pcie-phy
+      - qcom,sm8450-qmp-gen3x1-pcie-phy
+      - qcom,sm8450-qmp-gen4x2-pcie-phy
       - qcom,sm8550-qmp-gen3x2-pcie-phy
       - qcom,sm8550-qmp-gen4x2-pcie-phy
 
@@ -30,7 +43,7 @@ properties:
 
   clocks:
     minItems: 5
-    maxItems: 6
+    maxItems: 7
 
   clock-names:
     minItems: 5
@@ -38,9 +51,10 @@ properties:
       - const: aux
       - const: cfg_ahb
       - const: ref
-      - const: rchng
+      - enum: [rchng, refgen]
       - const: pipe
       - const: pipediv2
+      - const: phy_aux
 
   power-domains:
     maxItems: 1
@@ -84,7 +98,6 @@ required:
   - reg
   - clocks
   - clock-names
-  - power-domains
   - resets
   - reset-names
   - vdda-phy-supply
@@ -120,7 +133,18 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,sc8180x-qmp-pcie-phy
+              - qcom,sdm845-qhp-pcie-phy
+              - qcom,sdm845-qmp-pcie-phy
+              - qcom,sdx55-qmp-pcie-phy
+              - qcom,sm8150-qmp-gen3x1-pcie-phy
+              - qcom,sm8150-qmp-gen3x2-pcie-phy
+              - qcom,sm8250-qmp-gen3x1-pcie-phy
+              - qcom,sm8250-qmp-gen3x2-pcie-phy
+              - qcom,sm8250-qmp-modem-pcie-phy
               - qcom,sm8350-qmp-gen3x1-pcie-phy
+              - qcom,sm8450-qmp-gen3x1-pcie-phy
+              - qcom,sm8450-qmp-gen3x2-pcie-phy
               - qcom,sm8550-qmp-gen3x2-pcie-phy
               - qcom,sm8550-qmp-gen4x2-pcie-phy
     then:
@@ -129,7 +153,16 @@ allOf:
           maxItems: 5
         clock-names:
           maxItems: 5
-    else:
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,sc8280xp-qmp-gen3x1-pcie-phy
+              - qcom,sc8280xp-qmp-gen3x2-pcie-phy
+              - qcom,sc8280xp-qmp-gen3x4-pcie-phy
+    then:
       properties:
         clocks:
           minItems: 6
@@ -141,6 +174,20 @@ allOf:
         compatible:
           contains:
             enum:
+              - qcom,sa8775p-qmp-gen4x2-pcie-phy
+              - qcom,sa8775p-qmp-gen4x4-pcie-phy
+    then:
+      properties:
+        clocks:
+          minItems: 7
+        clock-names:
+          minItems: 7
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
               - qcom,sm8550-qmp-gen4x2-pcie-phy
     then:
       properties:
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
index a1897a7606df..d981d77e82e4 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-ufs-phy.yaml
@@ -16,21 +16,31 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,msm8996-qmp-ufs-phy
+      - qcom,msm8998-qmp-ufs-phy
       - qcom,sa8775p-qmp-ufs-phy
+      - qcom,sc8180x-qmp-ufs-phy
       - qcom,sc8280xp-qmp-ufs-phy
+      - qcom,sdm845-qmp-ufs-phy
+      - qcom,sm6115-qmp-ufs-phy
       - qcom,sm6125-qmp-ufs-phy
+      - qcom,sm6350-qmp-ufs-phy
       - qcom,sm7150-qmp-ufs-phy
+      - qcom,sm8150-qmp-ufs-phy
+      - qcom,sm8250-qmp-ufs-phy
+      - qcom,sm8350-qmp-ufs-phy
+      - qcom,sm8450-qmp-ufs-phy
       - qcom,sm8550-qmp-ufs-phy
 
   reg:
     maxItems: 1
 
   clocks:
-    minItems: 2
+    minItems: 1
     maxItems: 3
 
   clock-names:
-    minItems: 2
+    minItems: 1
     items:
       - const: ref
       - const: ref_aux
@@ -75,19 +85,51 @@ allOf:
           contains:
             enum:
               - qcom,sa8775p-qmp-ufs-phy
+              - qcom,sm8450-qmp-ufs-phy
     then:
       properties:
         clocks:
           minItems: 3
         clock-names:
           minItems: 3
-    else:
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8998-qmp-ufs-phy
+              - qcom,sc8180x-qmp-ufs-phy
+              - qcom,sc8280xp-qmp-ufs-phy
+              - qcom,sdm845-qmp-ufs-phy
+              - qcom,sm6115-qmp-ufs-phy
+              - qcom,sm6125-qmp-ufs-phy
+              - qcom,sm6350-qmp-ufs-phy
+              - qcom,sm7150-qmp-ufs-phy
+              - qcom,sm8150-qmp-ufs-phy
+              - qcom,sm8250-qmp-ufs-phy
+              - qcom,sm8350-qmp-ufs-phy
+              - qcom,sm8550-qmp-ufs-phy
+    then:
       properties:
         clocks:
           maxItems: 2
         clock-names:
           maxItems: 2
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - qcom,msm8996-qmp-ufs-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          maxItems: 1
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
index ef1c02d8ac88..9af203dc8793 100644
--- a/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,sc8280xp-qmp-usb43dp-phy.yaml
@@ -16,8 +16,14 @@ description:
 properties:
   compatible:
     enum:
+      - qcom,sc7180-qmp-usb3-dp-phy
+      - qcom,sc7280-qmp-usb3-dp-phy
+      - qcom,sc8180x-qmp-usb3-dp-phy
       - qcom,sc8280xp-qmp-usb43dp-phy
+      - qcom,sdm845-qmp-usb3-dp-phy
       - qcom,sm6350-qmp-usb3-dp-phy
+      - qcom,sm8150-qmp-usb3-dp-phy
+      - qcom,sm8250-qmp-usb3-dp-phy
       - qcom,sm8350-qmp-usb3-dp-phy
       - qcom,sm8450-qmp-usb3-dp-phy
       - qcom,sm8550-qmp-usb3-dp-phy
@@ -26,14 +32,17 @@ properties:
     maxItems: 1
 
   clocks:
-    maxItems: 4
+    minItems: 4
+    maxItems: 5
 
   clock-names:
+    minItems: 4
     items:
       - const: aux
       - const: ref
       - const: com_aux
       - const: usb3_pipe
+      - const: cfg_ahb
 
   power-domains:
     maxItems: 1
@@ -85,7 +94,6 @@ required:
   - reg
   - clocks
   - clock-names
-  - power-domains
   - resets
   - reset-names
   - vdda-phy-supply
@@ -93,6 +101,40 @@ required:
   - "#clock-cells"
   - "#phy-cells"
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc7180-qmp-usb3-dp-phy
+            - qcom,sdm845-qmp-usb3-dp-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 5
+        clock-names:
+          maxItems: 5
+    else:
+      properties:
+        clocks:
+          maxItems: 4
+        clock-names:
+          maxItems: 4
+
+  - if:
+      properties:
+        compatible:
+          enum:
+            - qcom,sc8280xp-qmp-usb43dp-phy
+            - qcom,sm6350-qmp-usb3-dp-phy
+            - qcom,sm8550-qmp-usb3-dp-phy
+    then:
+      required:
+        - power-domains
+    else:
+      properties:
+        power-domains: false
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
index 083fda530b48..029569d5fcf3 100644
--- a/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
+++ b/Documentation/devicetree/bindings/phy/qcom,snps-eusb2-repeater.yaml
@@ -15,7 +15,12 @@ description:
 
 properties:
   compatible:
-    const: qcom,pm8550b-eusb2-repeater
+    oneOf:
+      - items:
+          - enum:
+              - qcom,pm7550ba-eusb2-repeater
+          - const: qcom,pm8550b-eusb2-repeater
+      - const: qcom,pm8550b-eusb2-repeater
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml
index 0d6b8c28be07..5254413137c6 100644
--- a/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml
+++ b/Documentation/devicetree/bindings/phy/rockchip,inno-usb2phy.yaml
@@ -20,6 +20,7 @@ properties:
       - rockchip,rk3366-usb2phy
       - rockchip,rk3399-usb2phy
       - rockchip,rk3568-usb2phy
+      - rockchip,rk3588-usb2phy
       - rockchip,rv1108-usb2phy
 
   reg:
@@ -56,6 +57,14 @@ properties:
     description: Muxed interrupt for both ports
     maxItems: 1
 
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: phy
+      - const: apb
+
   rockchip,usbgrf:
     $ref: /schemas/types.yaml#/definitions/phandle
     description:
@@ -120,15 +129,21 @@ required:
   - reg
   - clock-output-names
   - "#clock-cells"
-  - host-port
-  - otg-port
+
+anyOf:
+  - required:
+      - otg-port
+  - required:
+      - host-port
 
 allOf:
   - if:
       properties:
         compatible:
           contains:
-            const: rockchip,rk3568-usb2phy
+            enum:
+              - rockchip,rk3568-usb2phy
+              - rockchip,rk3588-usb2phy
 
     then:
       properties:
diff --git a/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
index 9f2d8d2cc7a5..c4fbffcde6e4 100644
--- a/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/rockchip,pcie3-phy.yaml
@@ -13,19 +13,18 @@ properties:
   compatible:
     enum:
       - rockchip,rk3568-pcie3-phy
+      - rockchip,rk3588-pcie3-phy
 
   reg:
     maxItems: 1
 
   clocks:
-    minItems: 3
+    minItems: 1
     maxItems: 3
 
   clock-names:
-    items:
-      - const: refclk_m
-      - const: refclk_n
-      - const: pclk
+    minItems: 1
+    maxItems: 3
 
   data-lanes:
     description: which lanes (by position) should be mapped to which
@@ -61,6 +60,30 @@ required:
   - rockchip,phy-grf
   - "#phy-cells"
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - rockchip,rk3588-pcie3-phy
+    then:
+      properties:
+        clocks:
+          maxItems: 1
+        clock-names:
+          items:
+            - const: pclk
+    else:
+      properties:
+        clocks:
+          minItems: 3
+
+        clock-names:
+          items:
+            - const: refclk_m
+            - const: refclk_n
+            - const: pclk
+
 additionalProperties: false
 
 examples:
diff --git a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml
index 5c35e5ceec0b..46e64fa293d5 100644
--- a/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml
+++ b/Documentation/devicetree/bindings/phy/rockchip,px30-dsi-dphy.yaml
@@ -19,6 +19,7 @@ properties:
       - rockchip,rk3128-dsi-dphy
       - rockchip,rk3368-dsi-dphy
       - rockchip,rk3568-dsi-dphy
+      - rockchip,rv1126-dsi-dphy
 
   reg:
     maxItems: 1
diff --git a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
index 5ba55f9f20cc..452e584d9812 100644
--- a/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
+++ b/Documentation/devicetree/bindings/phy/samsung,usb3-drd-phy.yaml
@@ -29,6 +29,7 @@ properties:
       - samsung,exynos5420-usbdrd-phy
       - samsung,exynos5433-usbdrd-phy
       - samsung,exynos7-usbdrd-phy
+      - samsung,exynos850-usbdrd-phy
 
   clocks:
     minItems: 2
diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml
new file mode 100644
index 000000000000..7224cde6fce0
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/starfive,jh7110-dphy-rx.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive SoC JH7110 MIPI D-PHY Rx Controller
+
+maintainers:
+  - Jack Zhu <jack.zhu@starfivetech.com>
+  - Changhuang Liang <changhuang.liang@starfivetech.com>
+
+description:
+  StarFive SoCs contain a MIPI CSI D-PHY based on M31 IP, used to
+  transfer CSI camera data.
+
+properties:
+  compatible:
+    const: starfive,jh7110-dphy-rx
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: config clock
+      - description: reference clock
+      - description: escape mode transmit clock
+
+  clock-names:
+    items:
+      - const: cfg
+      - const: ref
+      - const: tx
+
+  resets:
+    items:
+      - description: DPHY_HW reset
+      - description: DPHY_B09_ALWAYS_ON reset
+
+  power-domains:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - resets
+  - power-domains
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@19820000 {
+      compatible = "starfive,jh7110-dphy-rx";
+      reg = <0x19820000 0x10000>;
+      clocks = <&ispcrg 3>,
+               <&ispcrg 4>,
+               <&ispcrg 5>;
+      clock-names = "cfg", "ref", "tx";
+      resets = <&ispcrg 2>,
+               <&ispcrg 3>;
+      power-domains = <&aon_syscon 1>;
+      #phy-cells = <0>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-pcie-phy.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-pcie-phy.yaml
new file mode 100644
index 000000000000..2e83a6164cd1
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-pcie-phy.yaml
@@ -0,0 +1,58 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/starfive,jh7110-pcie-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 PCIe 2.0 PHY
+
+maintainers:
+  - Minda Chen <minda.chen@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-pcie-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  starfive,sys-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to System Register Controller sys_syscon node.
+          - description: PHY connect offset of SYS_SYSCONSAIF__SYSCFG register for USB PHY.
+    description:
+      The phandle to System Register Controller syscon node and the PHY connect offset
+      of SYS_SYSCONSAIF__SYSCFG register. Connect PHY to USB3 controller.
+
+  starfive,stg-syscon:
+    $ref: /schemas/types.yaml#/definitions/phandle-array
+    items:
+      - items:
+          - description: phandle to System Register Controller stg_syscon node.
+          - description: PHY mode offset of STG_SYSCONSAIF__SYSCFG register.
+          - description: PHY enable for USB offset of STG_SYSCONSAIF__SYSCFG register.
+    description:
+      The phandle to System Register Controller syscon node and the offset
+      of STG_SYSCONSAIF__SYSCFG register for PCIe PHY. Total 2 regsisters offset.
+
+required:
+  - compatible
+  - reg
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@10210000 {
+        compatible = "starfive,jh7110-pcie-phy";
+        reg = <0x10210000 0x10000>;
+        #phy-cells = <0>;
+        starfive,sys-syscon = <&sys_syscon 0x18>;
+        starfive,stg-syscon = <&stg_syscon 0x148 0x1f4>;
+    };
diff --git a/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
new file mode 100644
index 000000000000..269e9f9f12b6
--- /dev/null
+++ b/Documentation/devicetree/bindings/phy/starfive,jh7110-usb-phy.yaml
@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/phy/starfive,jh7110-usb-phy.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 USB 2.0 PHY
+
+maintainers:
+  - Minda Chen <minda.chen@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-usb-phy
+
+  reg:
+    maxItems: 1
+
+  "#phy-cells":
+    const: 0
+
+  clocks:
+    items:
+      - description: PHY 125m
+      - description: app 125m
+
+  clock-names:
+    items:
+      - const: 125m
+      - const: app_125m
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - "#phy-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    phy@10200000 {
+        compatible = "starfive,jh7110-usb-phy";
+        reg = <0x10200000 0x10000>;
+        clocks = <&syscrg 95>,
+                 <&stgcrg 6>;
+        clock-names = "125m", "app_125m";
+        #phy-cells = <0>;
+    };