dt-bindings: pinctrl: {mediatek,ralink}: fix formatting

Change the style of description properties to plain style where there's no
need to preserve the line endings, and vice versa.

Fix capitalisation and indentation.

Fit the schemas to 80 columns for each line.

Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20230317213011.13656-16-arinc.unal@arinc9.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

1 files changed, 13 insertions, 13 deletions

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
index 3531b63ca4bf..38dc41c735eb 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
@@ -9,7 +9,7 @@ title: MediaTek MT7622 Pin Controller
 maintainers:
   - Sean Wang <sean.wang@kernel.org>
 
-description: |+
+description:
   The MediaTek's MT7622 Pin controller is used to control SoC pins.
 
 properties:
@@ -29,10 +29,10 @@ properties:
 
   "#gpio-cells":
     const: 2
-    description: |
-      Number of cells in GPIO specifier. Since the generic GPIO
-      binding is used, the amount of cells must be specified as 2. See the below
-      mentioned gpio binding representation for description of particular cells.
+    description:
+      Number of cells in GPIO specifier. Since the generic GPIO binding is used,
+      the amount of cells must be specified as 2. See the below mentioned gpio
+      binding representation for description of particular cells.
 
   interrupt-controller: true
 
@@ -68,18 +68,18 @@ patternProperties:
       '^mux(-|$)':
         type: object
         additionalProperties: false
-        description: |
+        description:
           pinmux configuration nodes.
         $ref: "/schemas/pinctrl/pinmux-node.yaml"
         properties:
           function:
-            description: |
+            description:
               A string containing the name of the function to mux to the group.
             enum: [emmc, eth, i2c, i2s, ir, led, flash, pcie, pmic, pwm, sd,
                    spi, tdm, uart, watchdog, wifi]
 
           groups:
-            description: |
+            description:
               An array of strings. Each string contains the name of a group.
 
           drive-strength:
@@ -247,18 +247,18 @@ patternProperties:
       '^conf(-|$)':
         type: object
         additionalProperties: false
-        description: |
+        description:
           pinconf configuration nodes.
         $ref: "/schemas/pinctrl/pincfg-node.yaml"
 
         properties:
           groups:
-            description: |
+            description:
               An array of strings. Each string contains the name of a group.
               Valid values are the same as the pinmux node.
 
           pins:
-            description: |
+            description:
               An array of strings. Each string contains the name of a pin.
             enum: [GPIO_A, I2S1_IN, I2S1_OUT, I2S_BCLK, I2S_WS, I2S_MCLK, TXD0,
                    RXD0, SPI_WP, SPI_HOLD, SPI_CLK, SPI_MOSI, SPI_MISO, SPI_CS,
@@ -315,14 +315,14 @@ patternProperties:
             enum: [0, 1]
 
           mediatek,tdsel:
-            description: |
+            description:
               An integer describing the steps for output level shifter duty
               cycle when asserted (high pulse width adjustment). Valid arguments
               are from 0 to 15.
             $ref: /schemas/types.yaml#/definitions/uint32
 
           mediatek,rdsel:
-            description: |
+            description:
               An integer describing the steps for input level shifter duty cycle
               when asserted (high pulse width adjustment). Valid arguments are
               from 0 to 63.