diff options
| author | Linus Walleij <linus.walleij@linaro.org> | 2017-05-08 10:48:21 +0200 |
|---|---|---|
| committer | Linus Walleij <linus.walleij@linaro.org> | 2017-05-22 10:39:10 +0200 |
| commit | b4d2ea2af95cb77e2f320e24da526280d4aa2f6b (patch) | |
| tree | 24005db946ede7cec566c13c407e1c53be400866 /Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt | |
| parent | pinctrl: cherryview: Add terminate entry for dmi_system_id tables (diff) | |
| download | linux-b4d2ea2af95cb77e2f320e24da526280d4aa2f6b.tar.xz linux-b4d2ea2af95cb77e2f320e24da526280d4aa2f6b.zip | |
Revert "pinctrl: generic: Add bi-directional and output-enable"
This reverts commit 8c58f1a7a4b6d1d723bf25fef9d842d5a11200d0.
It turns out that applying these generic properties was
premature: the properties used in the driver using this
are of unclear electrical nature and the subject need to
be discussed.
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Diffstat (limited to 'Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt | 2 |
1 files changed, 0 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt index 71a3c134af1b..f01d154090da 100644 --- a/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt +++ b/Documentation/devicetree/bindings/pinctrl/pinctrl-bindings.txt @@ -247,7 +247,6 @@ bias-bus-hold - latch weakly bias-pull-up - pull up the pin bias-pull-down - pull down the pin bias-pull-pin-default - use pin-default pull state -bi-directional - pin supports simultaneous input/output operations drive-push-pull - drive actively high and low drive-open-drain - drive with open drain drive-open-source - drive with open source @@ -260,7 +259,6 @@ input-debounce - debounce mode with debound time X power-source - select between different power supplies low-power-enable - enable low power mode low-power-disable - disable low power mode -output-enable - enable output on pin regardless of output value output-low - set the pin to output mode with low level output-high - set the pin to output mode with high level slew-rate - set the slew rate |