PM / Domains: Fix compatible for domain idle state

Re-using idle state definition provided by arm,idle-state for domain
idle states creates a lot of confusion and limits further evolution of
the domain idle definition. To keep things clear and simple, define a
idle states for domain using a new compatible "domain-idle-state".

Fix existing PM domains code to look for the newly defined compatible.

Signed-off-by: Lina Iyer <lina.iyer@linaro.org>
Reviewed-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>

1 files changed, 33 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/power/domain-idle-state.txt b/Documentation/devicetree/bindings/power/domain-idle-state.txt
new file mode 100644
index 000000000000..eefc7ed22ca2
--- /dev/null
+++ b/Documentation/devicetree/bindings/power/domain-idle-state.txt
@@ -0,0 +1,33 @@
+PM Domain Idle State Node:
+
+A domain idle state node represents the state parameters that will be used to
+select the state when there are no active components in the domain.
+
+The state node has the following parameters -
+
+- compatible:
+	Usage: Required
+	Value type: <string>
+	Definition: Must be "domain-idle-state".
+
+- entry-latency-us
+	Usage: Required
+	Value type: <prop-encoded-array>
+	Definition: u32 value representing worst case latency in
+		    microseconds required to enter the idle state.
+		    The exit-latency-us duration may be guaranteed
+		    only after entry-latency-us has passed.
+
+- exit-latency-us
+	Usage: Required
+	Value type: <prop-encoded-array>
+	Definition: u32 value representing worst case latency
+		    in microseconds required to exit the idle state.
+
+- min-residency-us
+	Usage: Required
+	Value type: <prop-encoded-array>
+	Definition: u32 value representing minimum residency duration
+		    in microseconds after which the idle state will yield
+		    power benefits after overcoming the overhead in entering
+i		    the idle state.