summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/serial
diff options
context:
space:
mode:
authorNiklas Cassel <nks@flawful.org>2015-07-25 02:02:46 +0200
committerGreg Kroah-Hartman <gregkh@linuxfoundation.org>2015-08-05 07:07:20 +0200
commit7b9c5162c1829686baea1962177842c3fa1ea81c (patch)
tree0ccac4807cb0a01b733989495ff099a603b4ae40 /Documentation/devicetree/bindings/serial
parentserial: etraxfs-uart: remove empty functions (diff)
downloadlinux-7b9c5162c1829686baea1962177842c3fa1ea81c.tar.xz
linux-7b9c5162c1829686baea1962177842c3fa1ea81c.zip
serial: etraxfs-uart: use mctrl_gpio helpers for handling modem signals
In order to use the mctrl_gpio helpers, we change the DT bindings: ri-gpios renamed to rng-gpios. cd-gpios renamed to dcd-gpios. However, no in-tree dts/dtsi specifies these, so no worries. Signed-off-by: Niklas Cassel <nks@flawful.org> Reviewed-by: Guenter Roeck <linux@roeck-us.net> Tested-by: Guenter Roeck <linux@roeck-us.net> Acked-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Diffstat (limited to 'Documentation/devicetree/bindings/serial')
-rw-r--r--Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt6
1 files changed, 5 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt
index ebcbb62c0a76..51b3c9e80ad9 100644
--- a/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt
+++ b/Documentation/devicetree/bindings/serial/axis,etraxfs-uart.txt
@@ -6,7 +6,7 @@ Required properties:
- interrupts: device interrupt
Optional properties:
-- {dtr,dsr,ri,cd}-gpios: specify a GPIO for DTR/DSR/RI/CD
+- {dtr,dsr,rng,dcd}-gpios: specify a GPIO for DTR/DSR/RI/DCD
line respectively.
Example:
@@ -16,4 +16,8 @@ serial@b00260000 {
reg = <0xb0026000 0x1000>;
interrupts = <68>;
status = "disabled";
+ dtr-gpios = <&sysgpio 0 GPIO_ACTIVE_LOW>;
+ dsr-gpios = <&sysgpio 1 GPIO_ACTIVE_LOW>;
+ rng-gpios = <&sysgpio 2 GPIO_ACTIVE_LOW>;
+ dcd-gpios = <&sysgpio 3 GPIO_ACTIVE_LOW>;
};