nfs: disintegrate UAPI for nfs

This is to complete part of the Userspace API (UAPI) disintegration for which
the preparatory patches were pulled recently.  After these patches, userspace
headers will be segregated into:

        include/uapi/linux/.../foo.h

for the userspace interface stuff, and:

        include/linux/.../foo.h

for the strictly kernel internal stuff.

Signed-off-by: J. Bruce Fields <bfields@redhat.com>

9 files changed, 349 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/sound/cs4270.txt b/Documentation/devicetree/bindings/sound/cs4270.txt
new file mode 100644
index 000000000000..6b222f9b8ef5
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs4270.txt
@@ -0,0 +1,21 @@
+CS4270 audio CODEC
+
+The driver for this device currently only supports I2C.
+
+Required properties:
+
+  - compatible : "cirrus,cs4270"
+
+  - reg : the I2C address of the device for I2C
+
+Optional properties:
+
+  - reset-gpio : a GPIO spec for the reset pin. If specified, it will be
+		 deasserted before communication to the codec starts.
+
+Example:
+
+codec: cs4270@48 {
+	compatible = "cirrus,cs4270";
+	reg = <0x48>;
+};
diff --git a/Documentation/devicetree/bindings/sound/cs4271.txt b/Documentation/devicetree/bindings/sound/cs4271.txt
new file mode 100644
index 000000000000..c81b5fd5a5bc
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/cs4271.txt
@@ -0,0 +1,36 @@
+Cirrus Logic CS4271 DT bindings
+
+This driver supports both the I2C and the SPI bus.
+
+Required properties:
+
+ - compatible: "cirrus,cs4271"
+
+For required properties on SPI, please consult
+Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Required properties on I2C:
+
+ - reg: the i2c address
+
+
+Optional properties:
+
+ - reset-gpio: 	a GPIO spec to define which pin is connected to the chip's
+		!RESET pin
+
+Examples:
+
+	codec_i2c: cs4271@10 {
+		compatible = "cirrus,cs4271";
+		reg = <0x10>;
+		reset-gpio = <&gpio 23 0>;
+	};
+
+	codec_spi: cs4271@0 {
+		compatible = "cirrus,cs4271";
+		reg = <0x0>;
+		reset-gpio = <&gpio 23 0>;
+		spi-max-frequency = <6000000>;
+	};
+
diff --git a/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
new file mode 100644
index 000000000000..374e145c2ef1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/davinci-mcasp-audio.txt
@@ -0,0 +1,45 @@
+Texas Instruments McASP controller
+
+Required properties:
+- compatible :
+	"ti,dm646x-mcasp-audio"	: for DM646x platforms
+	"ti,da830-mcasp-audio"	: for both DA830 & DA850 platforms
+	"ti,omap2-mcasp-audio"	: for OMAP2 platforms (TI81xx, AM33xx)
+
+- reg : Should contain McASP registers offset and length
+- interrupts : Interrupt number for McASP
+- op-mode : I2S/DIT ops mode.
+- tdm-slots : Slots for TDM operation.
+- num-serializer : Serializers used by McASP.
+- serial-dir : A list of serializer pin mode. The list number should be equal
+		to "num-serializer" parameter. Each entry is a number indication
+		serializer pin direction. (0 - INACTIVE, 1 - TX, 2 - RX)
+
+
+Optional properties:
+
+- ti,hwmods : Must be "mcasp<n>", n is controller instance starting 0
+- tx-num-evt : FIFO levels.
+- rx-num-evt : FIFO levels.
+- sram-size-playback : size of sram to be allocated during playback
+- sram-size-capture  : size of sram to be allocated during capture
+
+Example:
+
+mcasp0: mcasp0@1d00000 {
+	compatible = "ti,da830-mcasp-audio";
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x100000 0x3000>;
+	interrupts = <82 83>;
+	op-mode = <0>;		/* MCASP_IIS_MODE */
+	tdm-slots = <2>;
+	num-serializer = <16>;
+	serial-dir = <
+			0 0 0 0	/* 0: INACTIVE, 1: TX, 2: RX */
+			0 0 0 0
+			0 0 0 1
+			2 0 0 0 >;
+	tx-num-evt = <1>;
+	rx-num-evt = <1>;
+};
diff --git a/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
new file mode 100644
index 000000000000..65dec876cb2d
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/omap-abe-twl6040.txt
@@ -0,0 +1,91 @@
+* Texas Instruments OMAP4+ and twl6040 based audio setups
+
+Required properties:
+- compatible: "ti,abe-twl6040"
+- ti,model: Name of the sound card ( for example "SDP4430")
+- ti,mclk-freq: MCLK frequency for HPPLL operation
+- ti,mcpdm: phandle for the McPDM node
+- ti,twl6040: phandle for the twl6040 core node
+- ti,audio-routing: List of connections between audio components.
+  Each entry is a pair of strings, the first being the connection's sink,
+  the second being the connection's source.
+
+Optional properties:
+- ti,dmic: phandle for the OMAP dmic node if the machine have it connected
+- ti,jack_detection: Need to be set to <1> if the board capable to detect jack
+  insertion, removal.
+
+Available audio endpoints for the audio-routing table:
+
+Board connectors:
+ * Headset Stereophone
+ * Earphone Spk
+ * Ext Spk
+ * Line Out
+ * Vibrator
+ * Headset Mic
+ * Main Handset Mic
+ * Sub Handset Mic
+ * Line In
+ * Digital Mic
+
+twl6040 pins:
+ * HSOL
+ * HSOR
+ * EP
+ * HFL
+ * HFR
+ * AUXL
+ * AUXR
+ * VIBRAL
+ * VIBRAR
+ * HSMIC
+ * MAINMIC
+ * SUBMIC
+ * AFML
+ * AFMR
+
+ * Headset Mic Bias
+ * Main Mic Bias
+ * Digital Mic1 Bias
+ * Digital Mic2 Bias
+
+Digital mic pins:
+ * DMic
+
+Example:
+
+sound {
+	compatible = "ti,abe-twl6040";
+	ti,model = "SDP4430";
+
+	ti,jack-detection = <1>;
+	ti,mclk-freq = <38400000>;
+
+	ti,mcpdm = <&mcpdm>;
+	ti,dmic = <&dmic>;
+
+	ti,twl6040 = <&twl6040>;
+
+	/* Audio routing */
+	ti,audio-routing =
+		"Headset Stereophone", "HSOL",
+		"Headset Stereophone", "HSOR",
+		"Earphone Spk", "EP",
+		"Ext Spk", "HFL",
+		"Ext Spk", "HFR",
+		"Line Out", "AUXL",
+		"Line Out", "AUXR",
+		"Vibrator", "VIBRAL",
+		"Vibrator", "VIBRAR",
+		"HSMIC", "Headset Mic",
+		"Headset Mic", "Headset Mic Bias",
+		"MAINMIC", "Main Handset Mic",
+		"Main Handset Mic", "Main Mic Bias",
+		"SUBMIC", "Sub Handset Mic",
+		"Sub Handset Mic", "Main Mic Bias",
+		"AFML", "Line In",
+		"AFMR", "Line In",
+		"DMic", "Digital Mic",
+		"Digital Mic", "Digital Mic1 Bias";
+};
diff --git a/Documentation/devicetree/bindings/sound/omap-mcbsp.txt b/Documentation/devicetree/bindings/sound/omap-mcbsp.txt
new file mode 100644
index 000000000000..17cce4490456
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/omap-mcbsp.txt
@@ -0,0 +1,37 @@
+* Texas Instruments OMAP2+ McBSP module
+
+Required properties:
+- compatible: "ti,omap2420-mcbsp" for McBSP on OMAP2420
+	      "ti,omap2430-mcbsp" for McBSP on OMAP2430
+	      "ti,omap3-mcbsp" for McBSP on OMAP3
+	      "ti,omap4-mcbsp" for McBSP on OMAP4 and newer SoC
+- reg: Register location and size, for OMAP4+ as an array:
+       <MPU access base address, size>,
+       <L3 interconnect address, size>;
+- reg-names: Array of strings associated with the address space
+- interrupts: Interrupt numbers for the McBSP port, as an array in case the
+	      McBSP IP have more interrupt lines:
+	<OCP compliant irq>,
+	<TX irq>,
+	<RX irq>;
+- interrupt-names: Array of strings associated with the interrupt numbers
+- interrupt-parent: The parent interrupt controller
+- ti,buffer-size: Size of the FIFO on the port (OMAP2430 and newer SoC)
+- ti,hwmods: Name of the hwmod associated to the McBSP port
+
+Example:
+
+mcbsp2: mcbsp@49022000 {
+	compatible = "ti,omap3-mcbsp";
+	reg = <0x49022000 0xff>,
+	      <0x49028000 0xff>;
+	reg-names = "mpu", "sidetone";
+	interrupts = <0 17 0x4>, /* OCP compliant interrupt */
+		     <0 62 0x4>, /* TX interrupt */
+		     <0 63 0x4>, /* RX interrupt */
+		     <0 4 0x4>;  /* Sidetone */
+	interrupt-names = "common", "tx", "rx", "sidetone";
+	interrupt-parent = <&intc>;
+	ti,buffer-size = <1280>;
+	ti,hwmods = "mcbsp2";
+};
diff --git a/Documentation/devicetree/bindings/sound/omap-twl4030.txt b/Documentation/devicetree/bindings/sound/omap-twl4030.txt
new file mode 100644
index 000000000000..6fae51c7f766
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/omap-twl4030.txt
@@ -0,0 +1,17 @@
+* Texas Instruments SoC with twl4030 based audio setups
+
+Required properties:
+- compatible: "ti,omap-twl4030"
+- ti,model: Name of the sound card (for example "omap3beagle")
+- ti,mcbsp: phandle for the McBSP node
+- ti,codec: phandle for the twl4030 audio node
+
+Example:
+
+sound {
+	compatible = "ti,omap-twl4030";
+	ti,model = "omap3beagle";
+
+	ti,mcbsp = <&mcbsp2>;
+	ti,codec = <&twl_audio>;
+};
diff --git a/Documentation/devicetree/bindings/sound/tlv320aic3x.txt b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
new file mode 100644
index 000000000000..e7b98f41fa5f
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/tlv320aic3x.txt
@@ -0,0 +1,20 @@
+Texas Instruments - tlv320aic3x Codec module
+
+The tlv320aic3x serial control bus communicates through I2C protocols
+
+Required properties:
+- compatible - "string" -  "ti,tlv320aic3x"
+- reg - <int> -  I2C slave address
+
+
+Optional properties:
+
+- gpio-reset - gpio pin number used for codec reset
+- ai3x-gpio-func - <array of 2 int> - AIC3X_GPIO1 & AIC3X_GPIO2 Functionality
+
+Example:
+
+tlv320aic3x: tlv320aic3x@1b {
+	compatible = "ti,tlv320aic3x";
+	reg = <0x1b>;
+};
diff --git a/Documentation/devicetree/bindings/sound/ux500-mop500.txt b/Documentation/devicetree/bindings/sound/ux500-mop500.txt
new file mode 100644
index 000000000000..48e071c96b46
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ux500-mop500.txt
@@ -0,0 +1,39 @@
+* MOP500 Audio Machine Driver
+
+This node is responsible for linking together all ux500 Audio Driver components.
+
+Required properties:
+ - compatible              : "stericsson,snd-soc-mop500"
+
+Non-standard properties:
+ - stericsson,cpu-dai      : Phandle to the CPU-side DAI
+ - stericsson,audio-codec  : Phandle to the Audio CODEC
+ - stericsson,card-name    : Over-ride default card name
+
+Example:
+
+	sound {
+		compatible = "stericsson,snd-soc-mop500";
+
+		stericsson,cpu-dai = <&msp1 &msp3>;
+		stericsson,audio-codec = <&codec>;
+	};
+
+	msp1: msp@80124000 {
+		compatible = "stericsson,ux500-msp-i2s";
+		reg = <0x80124000 0x1000>;
+		interrupts = <0 62 0x4>;
+		v-ape-supply = <&db8500_vape_reg>;
+	};
+
+	msp3: msp@80125000 {
+		compatible = "stericsson,ux500-msp-i2s";
+		reg = <0x80125000 0x1000>;
+		interrupts = <0 62 0x4>;
+		v-ape-supply = <&db8500_vape_reg>;
+	};
+
+	codec: ab8500-codec {
+		compatible = "stericsson,ab8500-codec";
+		stericsson,earpeice-cmv = <950>; /* Units in mV. */
+	};
diff --git a/Documentation/devicetree/bindings/sound/ux500-msp.txt b/Documentation/devicetree/bindings/sound/ux500-msp.txt
new file mode 100644
index 000000000000..99acd9c774e1
--- /dev/null
+++ b/Documentation/devicetree/bindings/sound/ux500-msp.txt
@@ -0,0 +1,43 @@
+* ux500 MSP (CPU-side Digital Audio Interface)
+
+Required properties:
+ - compatible       :"stericsson,ux500-msp-i2s"
+ - reg              : Physical base address and length of the device's registers.
+
+Optional properties:
+ - interrupts       : The interrupt output from the device.
+ - interrupt-parent : The parent interrupt controller.
+ - <name>-supply    : Phandle to the regulator <name> supply
+
+Example:
+
+	sound {
+		compatible = "stericsson,snd-soc-mop500";
+
+		stericsson,platform-pcm-dma = <&pcm>;
+		stericsson,cpu-dai = <&msp1 &msp3>;
+		stericsson,audio-codec = <&codec>;
+	};
+
+	pcm: ux500-pcm {
+		compatible = "stericsson,ux500-pcm";
+	};
+
+	msp1: msp@80124000 {
+		compatible = "stericsson,ux500-msp-i2s";
+		reg = <0x80124000 0x1000>;
+		interrupts = <0 62 0x4>;
+		v-ape-supply = <&db8500_vape_reg>;
+	};
+
+	msp3: msp@80125000 {
+		compatible = "stericsson,ux500-msp-i2s";
+		reg = <0x80125000 0x1000>;
+		interrupts = <0 62 0x4>;
+		v-ape-supply = <&db8500_vape_reg>;
+	};
+
+	codec: ab8500-codec {
+		compatible = "stericsson,ab8500-codec";
+		stericsson,earpeice-cmv = <950>; /* Units in mV. */
+	};