spi: Convert NXP flexspi to json schema

Convert the NXP FlexSPI binding to DT schema format using json-schema.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210927105818.445675-1-kuldeep.singh@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>

1 files changed, 0 insertions, 44 deletions

diff --git a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt b/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt
deleted file mode 100644
index 8f34a7c7d8b8..000000000000
--- a/Documentation/devicetree/bindings/spi/spi-nxp-fspi.txt
+++ /dev/null
@@ -1,44 +0,0 @@
-* NXP Flex Serial Peripheral Interface (FSPI)
-
-Required properties:
-  - compatible : Should be "nxp,lx2160a-fspi"
-			    "nxp,imx8qxp-fspi"
-			    "nxp,imx8mm-fspi"
-			    "nxp,imx8mp-fspi"
-			    "nxp,imx8dxl-fspi"
-
-  - reg :        First contains the register location and length,
-                 Second contains the memory mapping address and length
-  - reg-names :  Should contain the resource reg names:
-	         - fspi_base: configuration register address space
-                 - fspi_mmap: memory mapped address space
-  - interrupts : Should contain the interrupt for the device
-
-Required SPI slave node properties:
-  - reg :        There are two buses (A and B) with two chip selects each.
-                 This encodes to which bus and CS the flash is connected:
-                 - <0>: Bus A, CS 0
-                 - <1>: Bus A, CS 1
-                 - <2>: Bus B, CS 0
-                 - <3>: Bus B, CS 1
-
-Example showing the usage of two SPI NOR slave devices on bus A:
-
-fspi0: spi@20c0000 {
-	compatible = "nxp,lx2160a-fspi";
-	reg = <0x0 0x20c0000 0x0 0x10000>, <0x0 0x20000000 0x0 0x10000000>;
-	reg-names = "fspi_base", "fspi_mmap";
-	interrupts = <0 25 0x4>; /* Level high type */
-	clocks = <&clockgen 4 3>, <&clockgen 4 3>;
-	clock-names = "fspi_en", "fspi";
-
-	mt35xu512aba0: flash@0 {
-		reg = <0>;
-		....
-	};
-
-	mt35xu512aba1: flash@1 {
-		reg = <1>;
-		....
-	};
-};