summaryrefslogtreecommitdiffstats
path: root/Documentation/devicetree/bindings/spi
diff options
context:
space:
mode:
authorPurna Chandra Mandal <purna.mandal@microchip.com>2016-04-01 13:18:49 +0200
committerMark Brown <broonie@kernel.org>2016-04-04 19:04:23 +0200
commit120e8989ebac7c7c702e351046c20e9918912aca (patch)
tree537da358609f9040cb4c3fea60f2b8bd891cc754 /Documentation/devicetree/bindings/spi
parentLinux 4.6-rc1 (diff)
downloadlinux-120e8989ebac7c7c702e351046c20e9918912aca.tar.xz
linux-120e8989ebac7c7c702e351046c20e9918912aca.zip
spi: pic32: Add bindings for PIC32 SPI peripheral
Document the devicetree bindings for the SPI peripheral found on Microchip PIC32 class devices. Signed-off-by: Purna Chandra Mandal <purna.mandal@microchip.com> Acked-by: Rob Herring <robh@kernel.org> Signed-off-by: Mark Brown <broonie@kernel.org>
Diffstat (limited to 'Documentation/devicetree/bindings/spi')
-rw-r--r--Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt34
1 files changed, 34 insertions, 0 deletions
diff --git a/Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt b/Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt
new file mode 100644
index 000000000000..79de379f4dc0
--- /dev/null
+++ b/Documentation/devicetree/bindings/spi/microchip,spi-pic32.txt
@@ -0,0 +1,34 @@
+Microchip PIC32 SPI Master controller
+
+Required properties:
+- compatible: Should be "microchip,pic32mzda-spi".
+- reg: Address and length of register space for the device.
+- interrupts: Should contain all three spi interrupts in sequence
+ of <fault-irq>, <receive-irq>, <transmit-irq>.
+- interrupt-names: Should be "fault", "rx", "tx" in order.
+- clocks: Phandle of the clock generating SPI clock on the bus.
+- clock-names: Should be "mck0".
+- cs-gpios: Specifies the gpio pins to be used for chipselects.
+ See: Documentation/devicetree/bindings/spi/spi-bus.txt
+
+Optional properties:
+- dmas: Two or more DMA channel specifiers following the convention outlined
+ in Documentation/devicetree/bindings/dma/dma.txt
+- dma-names: Names for the dma channels. There must be at least one channel
+ named "spi-tx" for transmit and named "spi-rx" for receive.
+
+Example:
+
+spi1: spi@1f821000 {
+ compatible = "microchip,pic32mzda-spi";
+ reg = <0x1f821000 0x200>;
+ interrupts = <109 IRQ_TYPE_LEVEL_HIGH>,
+ <110 IRQ_TYPE_LEVEL_HIGH>,
+ <111 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "fault", "rx", "tx";
+ clocks = <&PBCLK2>;
+ clock-names = "mck0";
+ cs-gpios = <&gpio3 4 GPIO_ACTIVE_LOW>;
+ dmas = <&dma 134>, <&dma 135>;
+ dma-names = "spi-rx", "spi-tx";
+};