diff options
author | Uwe Kleine-König <u.kleine-koenig@pengutronix.de> | 2014-03-14 21:34:22 +0100 |
---|---|---|
committer | Mark Brown <broonie@linaro.org> | 2014-03-14 21:36:48 +0100 |
commit | f2bb31057a42cb439161066db615ca73e4438e30 (patch) | |
tree | afd2f5399cbcb4d64b933ff72d8ba90099d838c3 /Documentation/devicetree/bindings/spi | |
parent | spi: efm32: Clean up non-DT paths (diff) | |
download | linux-f2bb31057a42cb439161066db615ca73e4438e30.tar.xz linux-f2bb31057a42cb439161066db615ca73e4438e30.zip |
spi: efm32: properly namespace location property
While reviewing an i2c driver for efm32 that needs a similar property
Wolfram Sang pointed out that "location" is a too generic name for
something that is efm32 specific. So add an appropriate namespace and
fall back to the generic name in case of failure.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Mark Brown <broonie@linaro.org>
Diffstat (limited to 'Documentation/devicetree/bindings/spi')
-rw-r--r-- | Documentation/devicetree/bindings/spi/efm32-spi.txt | 4 |
1 files changed, 2 insertions, 2 deletions
diff --git a/Documentation/devicetree/bindings/spi/efm32-spi.txt b/Documentation/devicetree/bindings/spi/efm32-spi.txt index a590ca51be75..25c02ba530da 100644 --- a/Documentation/devicetree/bindings/spi/efm32-spi.txt +++ b/Documentation/devicetree/bindings/spi/efm32-spi.txt @@ -8,7 +8,7 @@ Required properties: - interrupts: pair specifying rx and tx irq - clocks: phandle to the spi clock - cs-gpios: see spi-bus.txt -- location: Value to write to the ROUTE register's LOCATION bitfield to configure the pinmux for the device, see datasheet for values. +- efm32,location: Value to write to the ROUTE register's LOCATION bitfield to configure the pinmux for the device, see datasheet for values. Example: @@ -20,7 +20,7 @@ spi1: spi@0x4000c400 { /* USART1 */ interrupts = <15 16>; clocks = <&cmu 20>; cs-gpios = <&gpio 51 1>; // D3 - location = <1>; + efm32,location = <1>; status = "ok"; ks8851@0 { |