diff options
| author | Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org> | 2022-06-08 13:27:01 +0200 |
|---|---|---|
| committer | Daniel Lezcano <daniel.lezcano@linaro.org> | 2022-07-28 17:29:44 +0200 |
| commit | f16d37056be2feeae0680b3675b95ae876ab8c5c (patch) | |
| tree | ee3fc393fdd2bd7016a55574bf2e5dabec04758f /Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt | |
| parent | drivers/thermal/rcar_gen3_thermal: Improve logging during probe (diff) | |
| download | linux-f16d37056be2feeae0680b3675b95ae876ab8c5c.tar.xz linux-f16d37056be2feeae0680b3675b95ae876ab8c5c.zip | |
dt-bindings: thermal: qcom,spmi-temp-alarm: convert to dtschema
Convert the Qualcomm QPNP PMIC Temperature Alarm to DT Schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20220608112702.80873-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Diffstat (limited to 'Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt')
| -rw-r--r-- | Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt | 51 |
1 files changed, 0 insertions, 51 deletions
diff --git a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt b/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt deleted file mode 100644 index 2d5b2ad03314..000000000000 --- a/Documentation/devicetree/bindings/thermal/qcom-spmi-temp-alarm.txt +++ /dev/null @@ -1,51 +0,0 @@ -Qualcomm QPNP PMIC Temperature Alarm - -QPNP temperature alarm peripherals are found inside of Qualcomm PMIC chips -that utilize the Qualcomm SPMI implementation. These peripherals provide an -interrupt signal and status register to identify high PMIC die temperature. - -Required properties: -- compatible: Should contain "qcom,spmi-temp-alarm". -- reg: Specifies the SPMI address. -- interrupts: PMIC temperature alarm interrupt. -- #thermal-sensor-cells: Should be 0. See Documentation/devicetree/bindings/thermal/thermal-sensor.yaml for a description. - -Optional properties: -- io-channels: Should contain IIO channel specifier for the ADC channel, - which report chip die temperature. -- io-channel-names: Should contain "thermal". - -Example: - - pm8941_temp: thermal-alarm@2400 { - compatible = "qcom,spmi-temp-alarm"; - reg = <0x2400>; - interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>; - #thermal-sensor-cells = <0>; - - io-channels = <&pm8941_vadc VADC_DIE_TEMP>; - io-channel-names = "thermal"; - }; - - thermal-zones { - pm8941 { - polling-delay-passive = <250>; - polling-delay = <1000>; - - thermal-sensors = <&pm8941_temp>; - - trips { - stage1 { - temperature = <105000>; - hysteresis = <2000>; - type = "passive"; - }; - stage2 { - temperature = <125000>; - hysteresis = <2000>; - type = "critical"; - }; - }; - }; - }; - |