Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

Conflicts:
	drivers/net/ethernet/broadcom/genet/bcmgenet.c
	net/core/sock.c

Conflicts were overlapping changes in bcmgenet and the
lockdep handling of sockets.

Signed-off-by: David S. Miller <davem@davemloft.net>

1 files changed, 18 insertions, 35 deletions

diff --git a/Documentation/devicetree/bindings/usb/usb251xb.txt b/Documentation/devicetree/bindings/usb/usb251xb.txt
index 0c065f77658f..3957d4edaa74 100644
--- a/Documentation/devicetree/bindings/usb/usb251xb.txt
+++ b/Documentation/devicetree/bindings/usb/usb251xb.txt
@@ -7,18 +7,18 @@ Required properties :
  - compatible : Should be "microchip,usb251xb" or one of the specific types:
 	"microchip,usb2512b", "microchip,usb2512bi", "microchip,usb2513b",
 	"microchip,usb2513bi", "microchip,usb2514b", "microchip,usb2514bi"
- - hub-reset-gpios : Should specify the gpio for hub reset
+ - reset-gpios : Should specify the gpio for hub reset
+ - reg : I2C address on the selected bus (default is <0x2C>)
 
 Optional properties :
- - reg : I2C address on the selected bus (default is <0x2C>)
  - skip-config : Skip Hub configuration, but only send the USB-Attach command
- - vendor-id : USB Vendor ID of the hub (16 bit, default is 0x0424)
- - product-id : USB Product ID of the hub (16 bit, default depends on type)
- - device-id : USB Device ID of the hub (16 bit, default is 0x0bb3)
- - language-id : USB Language ID (16 bit, default is 0x0000)
- - manufacturer : USB Manufacturer string (max 31 characters long)
- - product : USB Product string (max 31 characters long)
- - serial : USB Serial string (max 31 characters long)
+ - vendor-id : Set USB Vendor ID of the hub (16 bit, default is 0x0424)
+ - product-id : Set USB Product ID of the hub (16 bit, default depends on type)
+ - device-id : Set USB Device ID of the hub (16 bit, default is 0x0bb3)
+ - language-id : Set USB Language ID (16 bit, default is 0x0000)
+ - manufacturer : Set USB Manufacturer string (max 31 characters long)
+ - product : Set USB Product string (max 31 characters long)
+ - serial : Set USB Serial string (max 31 characters long)
  - {bus,self}-powered : selects between self- and bus-powered operation (default
 	is self-powered)
  - disable-hi-speed : disable USB Hi-Speed support
@@ -31,8 +31,10 @@ Optional properties :
 	(default is individual)
  - dynamic-power-switching : enable auto-switching from self- to bus-powered
 	operation if the local power source is removed or unavailable
- - oc-delay-{100us,4ms,8ms,16ms} : set over current timer delay (default is 8ms)
- - compound-device : indicated the hub is part of a compound device
+ - oc-delay-us : Delay time (in microseconds) for filtering the over-current
+	sense inputs. Valid values are 100, 4000, 8000 (default) and 16000. If
+	an invalid value is given, the default is used instead.
+ - compound-device : indicate the hub is part of a compound device
  - port-mapping-mode : enable port mapping mode
  - string-support : enable string descriptor support (required for manufacturer,
 	product and serial string configuration)
@@ -40,34 +42,15 @@ Optional properties :
 	device connected.
  - sp-disabled-ports : Specifies the ports which will be self-power disabled
  - bp-disabled-ports : Specifies the ports which will be bus-power disabled
- - max-sp-power : Specifies the maximum current the hub consumes from an
-	upstream port when operating as self-powered hub including the power
-	consumption of a permanently attached peripheral if the hub is
-	configured as a compound device. The value is given in mA in a 0 - 500
-	range (default is 2).
- - max-bp-power : Specifies the maximum current the hub consumes from an
-	upstream port when operating as bus-powered hub including the power
-	consumption of a permanently attached peripheral if the hub is
-	configured as a compound device. The value is given in mA in a 0 - 500
-	range (default is 100).
- - max-sp-current : Specifies the maximum current the hub consumes from an
-	upstream port when operating as self-powered hub EXCLUDING the power
-	consumption of a permanently attached peripheral if the hub is
-	configured as a compound device. The value is given in mA in a 0 - 500
-	range (default is 2).
- - max-bp-current : Specifies the maximum current the hub consumes from an
-	upstream port when operating as bus-powered hub EXCLUDING the power
-	consumption of a permanently attached peripheral if the hub is
-	configured as a compound device. The value is given in mA in a 0 - 500
-	range (default is 100).
- - power-on-time : Specifies the time it takes from the time the host initiates
-	the power-on sequence to a port until the port has adequate power. The
-	value is given in ms in a 0 - 510 range (default is 100ms).
+ - power-on-time-ms : Specifies the time it takes from the time the host
+	initiates the power-on sequence to a port until the port has adequate
+	power. The value is given in ms in a 0 - 510 range (default is 100ms).
 
 Examples:
 	usb2512b@2c {
 		compatible = "microchip,usb2512b";
-		hub-reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
+		reg = <0x2c>;
+		reset-gpios = <&gpio1 4 GPIO_ACTIVE_LOW>;
 	};
 
 	usb2514b@2c {