Merge git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net

We got slightly different patches removing a double word
in a comment in net/ipv4/raw.c - picked the version from net.

Simple conflict in drivers/net/ethernet/ibm/ibmvnic.c. Use cached
values instead of VNIC login response buffer (following what
commit 507ebe6444a4 ("ibmvnic: Fix use-after-free of VNIC login
response buffer") did).

Signed-off-by: Jakub Kicinski <kuba@kernel.org>

8 files changed, 239 insertions, 155 deletions

diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
deleted file mode 100644
index 7841cb099e13..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.txt
+++ /dev/null
@@ -1,66 +0,0 @@
-Texas Instruments K3 Interrupt Aggregator
-=========================================
-
-The Interrupt Aggregator (INTA) provides a centralized machine
-which handles the termination of system events to that they can
-be coherently processed by the host(s) in the system. A maximum
-of 64 events can be mapped to a single interrupt.
-
-
-                              Interrupt Aggregator
-                     +-----------------------------------------+
-                     |      Intmap            VINT             |
-                     | +--------------+  +------------+        |
-            m ------>| | vint  | bit  |  | 0 |.....|63| vint0  |
-               .     | +--------------+  +------------+        |       +------+
-               .     |         .               .               |       | HOST |
-Globalevents  ------>|         .               .               |------>| IRQ  |
-               .     |         .               .               |       | CTRL |
-               .     |         .               .               |       +------+
-            n ------>| +--------------+  +------------+        |
-                     | | vint  | bit  |  | 0 |.....|63| vintx  |
-                     | +--------------+  +------------+        |
-                     |                                         |
-                     +-----------------------------------------+
-
-Configuration of these Intmap registers that maps global events to vint is done
-by a system controller (like the Device Memory and Security Controller on K3
-AM654 SoC). Driver should request the system controller to get the range
-of global events and vints assigned to the requesting host. Management
-of these requested resources should be handled by driver and requests
-system controller to map specific global event to vint, bit pair.
-
-Communication between the host processor running an OS and the system
-controller happens through a protocol called TI System Control Interface
-(TISCI protocol). For more details refer:
-Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
-
-TISCI Interrupt Aggregator Node:
--------------------------------
-- compatible:		Must be "ti,sci-inta".
-- reg:			Should contain registers location and length.
-- interrupt-controller:	Identifies the node as an interrupt controller
-- msi-controller:	Identifies the node as an MSI controller.
-- interrupt-parent:	phandle of irq parent.
-- ti,sci:		Phandle to TI-SCI compatible System controller node.
-- ti,sci-dev-id:	TISCI device ID of the Interrupt Aggregator.
-- ti,sci-rm-range-vint:	Array of TISCI subtype ids representing vints(inta
-			outputs) range within this INTA, assigned to the
-			requesting host context.
-- ti,sci-rm-range-global-event:	Array of TISCI subtype ids representing the
-			global events range reaching this IA and are assigned
-			to the requesting host context.
-
-Example:
---------
-main_udmass_inta: interrupt-controller@33d00000 {
-	compatible = "ti,sci-inta";
-	reg = <0x0 0x33d00000 0x0 0x100000>;
-	interrupt-controller;
-	msi-controller;
-	interrupt-parent = <&main_navss_intr>;
-	ti,sci = <&dmsc>;
-	ti,sci-dev-id = <179>;
-	ti,sci-rm-range-vint = <0x0>;
-	ti,sci-rm-range-global-event = <0x1>;
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
new file mode 100644
index 000000000000..c7cd05656a3e
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-inta.yaml
@@ -0,0 +1,98 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-inta.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Interrupt Aggregator
+
+maintainers:
+  - Lokesh Vutla <lokeshvutla@ti.com>
+
+allOf:
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+description: |
+  The Interrupt Aggregator (INTA) provides a centralized machine
+  which handles the termination of system events to that they can
+  be coherently processed by the host(s) in the system. A maximum
+  of 64 events can be mapped to a single interrupt.
+
+                                Interrupt Aggregator
+                       +-----------------------------------------+
+                       |      Intmap            VINT             |
+                       | +--------------+  +------------+        |
+              m ------>| | vint  | bit  |  | 0 |.....|63| vint0  |
+                 .     | +--------------+  +------------+        |      +------+
+                 .     |         .               .               |      | HOST |
+  Globalevents  ------>|         .               .               |----->| IRQ  |
+                 .     |         .               .               |      | CTRL |
+                 .     |         .               .               |      +------+
+              n ------>| +--------------+  +------------+        |
+                       | | vint  | bit  |  | 0 |.....|63| vintx  |
+                       | +--------------+  +------------+        |
+                       |                                         |
+                       +-----------------------------------------+
+
+  Configuration of these Intmap registers that maps global events to vint is
+  done by a system controller (like the Device Memory and Security Controller
+  on AM654 SoC). Driver should request the system controller to get the range
+  of global events and vints assigned to the requesting host. Management
+  of these requested resources should be handled by driver and requests
+  system controller to map specific global event to vint, bit pair.
+
+  Communication between the host processor running an OS and the system
+  controller happens through a protocol called TI System Control Interface
+  (TISCI protocol).
+
+properties:
+  compatible:
+    const: ti,sci-inta
+
+  reg:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  msi-controller: true
+
+  ti,interrupt-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      Interrupt ranges that converts the INTA output hw irq numbers
+      to parents's input interrupt numbers.
+    items:
+      items:
+        - description: |
+            "output_irq" specifies the base for inta output irq
+        - description: |
+            "parent's input irq" specifies the base for parent irq
+        - description: |
+            "limit" specifies the limit for translation
+
+required:
+  - compatible
+  - reg
+  - interrupt-controller
+  - msi-controller
+  - ti,sci
+  - ti,sci-dev-id
+  - ti,interrupt-ranges
+
+examples:
+  - |
+    bus {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        main_udmass_inta: msi-controller@33d00000 {
+            compatible = "ti,sci-inta";
+            reg = <0x0 0x33d00000 0x0 0x100000>;
+            interrupt-controller;
+            msi-controller;
+            interrupt-parent = <&main_navss_intr>;
+            ti,sci = <&dmsc>;
+            ti,sci-dev-id = <179>;
+            ti,interrupt-ranges = <0 0 256>;
+        };
+    };
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
deleted file mode 100644
index 178fca08278f..000000000000
--- a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Texas Instruments K3 Interrupt Router
-=====================================
-
-The Interrupt Router (INTR) module provides a mechanism to mux M
-interrupt inputs to N interrupt outputs, where all M inputs are selectable
-to be driven per N output. An Interrupt Router can either handle edge triggered
-or level triggered interrupts and that is fixed in hardware.
-
-                                 Interrupt Router
-                             +----------------------+
-                             |  Inputs     Outputs  |
-        +-------+            | +------+    +-----+  |
-        | GPIO  |----------->| | irq0 |    |  0  |  |       Host IRQ
-        +-------+            | +------+    +-----+  |      controller
-                             |    .           .     |      +-------+
-        +-------+            |    .           .     |----->|  IRQ  |
-        | INTA  |----------->|    .           .     |      +-------+
-        +-------+            |    .        +-----+  |
-                             | +------+    |  N  |  |
-                             | | irqM |    +-----+  |
-                             | +------+             |
-                             |                      |
-                             +----------------------+
-
-There is one register per output (MUXCNTL_N) that controls the selection.
-Configuration of these MUXCNTL_N registers is done by a system controller
-(like the Device Memory and Security Controller on K3 AM654 SoC). System
-controller will keep track of the used and unused registers within the Router.
-Driver should request the system controller to get the range of GIC IRQs
-assigned to the requesting hosts. It is the drivers responsibility to keep
-track of Host IRQs.
-
-Communication between the host processor running an OS and the system
-controller happens through a protocol called TI System Control Interface
-(TISCI protocol). For more details refer:
-Documentation/devicetree/bindings/arm/keystone/ti,sci.txt
-
-TISCI Interrupt Router Node:
-----------------------------
-Required Properties:
-- compatible:		Must be "ti,sci-intr".
-- ti,intr-trigger-type:	Should be one of the following:
-			1: If intr supports edge triggered interrupts.
-			4: If intr supports level triggered interrupts.
-- interrupt-controller:	Identifies the node as an interrupt controller
-- #interrupt-cells:	Specifies the number of cells needed to encode an
-			interrupt source. The value should be 2.
-			First cell should contain the TISCI device ID of source
-			Second cell should contain the interrupt source offset
-			within the device.
-- ti,sci:		Phandle to TI-SCI compatible System controller node.
-- ti,sci-dst-id:	TISCI device ID of the destination IRQ controller.
-- ti,sci-rm-range-girq:	Array of TISCI subtype ids representing the host irqs
-			assigned to this interrupt router. Each subtype id
-			corresponds to a range of host irqs.
-
-For more details on TISCI IRQ resource management refer:
-https://downloads.ti.com/tisci/esd/latest/2_tisci_msgs/rm/rm_irq.html
-
-Example:
---------
-The following example demonstrates both interrupt router node and the consumer
-node(main gpio) on the AM654 SoC:
-
-main_intr: interrupt-controller0 {
-	compatible = "ti,sci-intr";
-	ti,intr-trigger-type = <1>;
-	interrupt-controller;
-	interrupt-parent = <&gic500>;
-	#interrupt-cells = <2>;
-	ti,sci = <&dmsc>;
-	ti,sci-dst-id = <56>;
-	ti,sci-rm-range-girq = <0x1>;
-};
-
-main_gpio0: gpio@600000 {
-	...
-	interrupt-parent = <&main_intr>;
-	interrupts = <57 256>, <57 257>, <57 258>,
-		     <57 259>, <57 260>, <57 261>;
-	...
-};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
new file mode 100644
index 000000000000..cff6a956afb4
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/ti,sci-intr.yaml
@@ -0,0 +1,102 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/interrupt-controller/ti,sci-intr.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments K3 Interrupt Router
+
+maintainers:
+  - Lokesh Vutla <lokeshvutla@ti.com>
+
+allOf:
+  - $ref: /schemas/arm/keystone/ti,k3-sci-common.yaml#
+
+description: |
+  The Interrupt Router (INTR) module provides a mechanism to mux M
+  interrupt inputs to N interrupt outputs, where all M inputs are selectable
+  to be driven per N output. An Interrupt Router can either handle edge
+  triggered or level triggered interrupts and that is fixed in hardware.
+
+                                   Interrupt Router
+                               +----------------------+
+                               |  Inputs     Outputs  |
+          +-------+            | +------+    +-----+  |
+          | GPIO  |----------->| | irq0 |    |  0  |  |       Host IRQ
+          +-------+            | +------+    +-----+  |      controller
+                               |    .           .     |      +-------+
+          +-------+            |    .           .     |----->|  IRQ  |
+          | INTA  |----------->|    .           .     |      +-------+
+          +-------+            |    .        +-----+  |
+                               | +------+    |  N  |  |
+                               | | irqM |    +-----+  |
+                               | +------+             |
+                               |                      |
+                               +----------------------+
+
+  There is one register per output (MUXCNTL_N) that controls the selection.
+  Configuration of these MUXCNTL_N registers is done by a system controller
+  (like the Device Memory and Security Controller on K3 AM654 SoC). System
+  controller will keep track of the used and unused registers within the Router.
+  Driver should request the system controller to get the range of GIC IRQs
+  assigned to the requesting hosts. It is the drivers responsibility to keep
+  track of Host IRQs.
+
+  Communication between the host processor running an OS and the system
+  controller happens through a protocol called TI System Control Interface
+  (TISCI protocol).
+
+properties:
+  compatible:
+    const: ti,sci-intr
+
+  ti,intr-trigger-type:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [1, 4]
+    description: |
+      Should be one of the following.
+        1 = If intr supports edge triggered interrupts.
+        4 = If intr supports level triggered interrupts.
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 1
+    description: |
+      The 1st cell should contain interrupt router input hw number.
+
+  ti,interrupt-ranges:
+    $ref: /schemas/types.yaml#/definitions/uint32-matrix
+    description: |
+      Interrupt ranges that converts the INTR output hw irq numbers
+      to parents's input interrupt numbers.
+    items:
+      items:
+        - description: |
+            "output_irq" specifies the base for intr output irq
+        - description: |
+            "parent's input irq" specifies the base for parent irq
+        - description: |
+            "limit" specifies the limit for translation
+
+required:
+  - compatible
+  - ti,intr-trigger-type
+  - interrupt-controller
+  - '#interrupt-cells'
+  - ti,sci
+  - ti,sci-dev-id
+  - ti,interrupt-ranges
+
+examples:
+  - |
+    main_gpio_intr: interrupt-controller0 {
+        compatible = "ti,sci-intr";
+        ti,intr-trigger-type = <1>;
+        interrupt-controller;
+        interrupt-parent = <&gic500>;
+        #interrupt-cells = <1>;
+        ti,sci = <&dmsc>;
+        ti,sci-dev-id = <131>;
+        ti,interrupt-ranges = <0 360 32>;
+    };
diff --git a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
index 5887c917d480..58fe9d02a781 100644
--- a/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
+++ b/Documentation/devicetree/bindings/mmc/arasan,sdhci.yaml
@@ -30,9 +30,13 @@ allOf:
     then:
       properties:
         clock-output-names:
-          items:
-            - const: clk_out_sd0
-            - const: clk_in_sd0
+          oneOf:
+            - items:
+              - const: clk_out_sd0
+              - const: clk_in_sd0
+            - items:
+              - const: clk_out_sd1
+              - const: clk_in_sd1
 
 properties:
   compatible:
diff --git a/Documentation/devicetree/bindings/mmc/mtk-sd.txt b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
index 0c9cf6a8808c..26a8f320a156 100644
--- a/Documentation/devicetree/bindings/mmc/mtk-sd.txt
+++ b/Documentation/devicetree/bindings/mmc/mtk-sd.txt
@@ -50,6 +50,8 @@ Optional properties:
 		     error caused by stop clock(fifo full)
 		     Valid range = [0:0x7]. if not present, default value is 0.
 		     applied to compatible "mediatek,mt2701-mmc".
+- resets: Phandle and reset specifier pair to softreset line of MSDC IP.
+- reset-names: Should be "hrst".
 
 Examples:
 mmc0: mmc@11230000 {
diff --git a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
index 2cf3affa1be7..96c0b1440c9c 100644
--- a/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
+++ b/Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.txt
@@ -15,8 +15,15 @@ Required properties:
   - "nvidia,tegra210-sdhci": for Tegra210
   - "nvidia,tegra186-sdhci": for Tegra186
   - "nvidia,tegra194-sdhci": for Tegra194
-- clocks : Must contain one entry, for the module clock.
-  See ../clocks/clock-bindings.txt for details.
+- clocks: For Tegra210, Tegra186 and Tegra194 must contain two entries.
+	  One for the module clock and one for the timeout clock.
+	  For all other Tegra devices, must contain a single entry for
+	  the module clock. See ../clocks/clock-bindings.txt for details.
+- clock-names: For Tegra210, Tegra186 and Tegra194 must contain the
+	       strings 'sdhci' and 'tmclk' to represent the module and
+	       the timeout clocks, respectively.
+	       For all other Tegra devices must contain the string 'sdhci'
+	       to represent the module clock.
 - resets : Must contain an entry for each entry in reset-names.
   See ../reset/reset.txt for details.
 - reset-names : Must include the following entries:
@@ -99,7 +106,7 @@ Optional properties for Tegra210, Tegra186 and Tegra194:
 
 Example:
 sdhci@700b0000 {
-	compatible = "nvidia,tegra210-sdhci", "nvidia,tegra124-sdhci";
+	compatible = "nvidia,tegra124-sdhci";
 	reg = <0x0 0x700b0000 0x0 0x200>;
 	interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
 	clocks = <&tegra_car TEGRA210_CLK_SDMMC1>;
@@ -115,3 +122,22 @@ sdhci@700b0000 {
 	nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
 	status = "disabled";
 };
+
+sdhci@700b0000 {
+	compatible = "nvidia,tegra210-sdhci";
+	reg = <0x0 0x700b0000 0x0 0x200>;
+	interrupts = <GIC_SPI 14 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&tegra_car TEGRA210_CLK_SDMMC1>,
+		 <&tegra_car TEGRA210_CLK_SDMMC_LEGACY>;
+	clock-names = "sdhci", "tmclk";
+	resets = <&tegra_car 14>;
+	reset-names = "sdhci";
+	pinctrl-names = "sdmmc-3v3", "sdmmc-1v8";
+	pinctrl-0 = <&sdmmc1_3v3>;
+	pinctrl-1 = <&sdmmc1_1v8>;
+	nvidia,pad-autocal-pull-up-offset-3v3 = <0x00>;
+	nvidia,pad-autocal-pull-down-offset-3v3 = <0x7d>;
+	nvidia,pad-autocal-pull-up-offset-1v8 = <0x7b>;
+	nvidia,pad-autocal-pull-down-offset-1v8 = <0x7b>;
+	status = "disabled";
+};
diff --git a/Documentation/devicetree/bindings/net/dsa/dsa.txt b/Documentation/devicetree/bindings/net/dsa/dsa.txt
index bf7328aba330..dab208b5c7c7 100644
--- a/Documentation/devicetree/bindings/net/dsa/dsa.txt
+++ b/Documentation/devicetree/bindings/net/dsa/dsa.txt
@@ -1,4 +1,4 @@
 Distributed Switch Architecture Device Tree Bindings
 ----------------------------------------------------
 
-See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documenation.
+See Documentation/devicetree/bindings/net/dsa/dsa.yaml for the documentation.