of: update ePAPR references to point to Devicetree Specification

The Devicetree Specification has superseded the ePAPR as the
base specification for bindings.  Update files in Documentation
to reference the new document.

First reference to ePAPR in Documentation/devicetree/bindings/arm/cci.txt
is generic, remove it.

Some files are not updated because there is no hypervisor chapter
in the Devicetree Specification:
   Documentation/devicetree/bindings/powerpc/fsl/msi-pic.txt
   Documenation/virtual/kvm/api.txt
   Documenation/virtual/kvm/ppc-pv.txt

Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>

16 files changed, 41 insertions, 43 deletions

diff --git a/Documentation/devicetree/bindings/arm/cci.txt b/Documentation/devicetree/bindings/arm/cci.txt
index 0f2153e8fa7e..9600761f2d5b 100644
--- a/Documentation/devicetree/bindings/arm/cci.txt
+++ b/Documentation/devicetree/bindings/arm/cci.txt
@@ -11,13 +11,6 @@ clusters, through memory mapped interface, with a global control register
 space and multiple sets of interface control registers, one per slave
 interface.
 
-Bindings for the CCI node follow the ePAPR standard, available from:
-
-www.power.org/documentation/epapr-version-1-1/
-
-with the addition of the bindings described in this document which are
-specific to ARM.
-
 * CCI interconnect node
 
 	Description: Describes a CCI cache coherent Interconnect component
@@ -50,10 +43,10 @@ specific to ARM.
 			    as a tuple of cells, containing child address,
 			    parent address and the size of the region in the
 			    child address space.
-		Definition: A standard property. Follow rules in the ePAPR for
-			    hierarchical bus addressing. CCI interfaces
-			    addresses refer to the parent node addressing
-			    scheme to declare their register bases.
+		Definition: A standard property. Follow rules in the Devicetree
+			    Specification for hierarchical bus addressing. CCI
+			    interfaces addresses refer to the parent node
+			    addressing scheme to declare their register bases.
 
 	CCI interconnect node can define the following child nodes:
 
diff --git a/Documentation/devicetree/bindings/arm/cpus.txt b/Documentation/devicetree/bindings/arm/cpus.txt
index 1030f5f50207..283c520a2224 100644
--- a/Documentation/devicetree/bindings/arm/cpus.txt
+++ b/Documentation/devicetree/bindings/arm/cpus.txt
@@ -6,9 +6,9 @@ The device tree allows to describe the layout of CPUs in a system through
 the "cpus" node, which in turn contains a number of subnodes (ie "cpu")
 defining properties for every cpu.
 
-Bindings for CPU nodes follow the ePAPR v1.1 standard, available from:
+Bindings for CPU nodes follow the Devicetree Specification, available from:
 
-https://www.power.org/documentation/epapr-version-1-1/
+https://www.devicetree.org/specifications/
 
 with updates for 32-bit and 64-bit ARM systems provided in this document.
 
@@ -16,8 +16,8 @@ with updates for 32-bit and 64-bit ARM systems provided in this document.
 Convention used in this document
 ================================
 
-This document follows the conventions described in the ePAPR v1.1, with
-the addition:
+This document follows the conventions described in the Devicetree
+Specification, with the addition:
 
 - square brackets define bitfields, eg reg[7:0] value of the bitfield in
   the reg property contained in bits 7 down to 0
@@ -26,8 +26,9 @@ the addition:
 cpus and cpu node bindings definition
 =====================================
 
-The ARM architecture, in accordance with the ePAPR, requires the cpus and cpu
-nodes to be present and contain the properties described below.
+The ARM architecture, in accordance with the Devicetree Specification,
+requires the cpus and cpu nodes to be present and contain the properties
+described below.
 
 - cpus node
 
diff --git a/Documentation/devicetree/bindings/arm/idle-states.txt b/Documentation/devicetree/bindings/arm/idle-states.txt
index b8e41c148a3c..7a591333f2b1 100644
--- a/Documentation/devicetree/bindings/arm/idle-states.txt
+++ b/Documentation/devicetree/bindings/arm/idle-states.txt
@@ -695,5 +695,5 @@ cpus {
 [4] ARM Architecture Reference Manuals
     http://infocenter.arm.com/help/index.jsp
 
-[5] ePAPR standard
-    https://www.power.org/documentation/epapr-version-1-1/
+[5] Devicetree Specification
+    https://www.devicetree.org/specifications/
diff --git a/Documentation/devicetree/bindings/arm/l2c2x0.txt b/Documentation/devicetree/bindings/arm/l2c2x0.txt
index d9650c1788f4..fbe6cb21f4cf 100644
--- a/Documentation/devicetree/bindings/arm/l2c2x0.txt
+++ b/Documentation/devicetree/bindings/arm/l2c2x0.txt
@@ -4,8 +4,8 @@ ARM cores often have a separate L2C210/L2C220/L2C310 (also known as PL210/PL220/
 PL310 and variants) based level 2 cache controller. All these various implementations
 of the L2 cache controller have compatible programming models (Note 1).
 Some of the properties that are just prefixed "cache-*" are taken from section
-3.7.3 of the ePAPR v1.1 specification which can be found at:
-https://www.power.org/wp-content/uploads/2012/06/Power_ePAPR_APPROVED_v1.1.pdf
+3.7.3 of the Devicetree Specification which can be found at:
+https://www.devicetree.org/specifications/
 
 The ARM L2 cache representation in the device tree should be done as follows:
 
diff --git a/Documentation/devicetree/bindings/arm/topology.txt b/Documentation/devicetree/bindings/arm/topology.txt
index 1061faf5f602..de9eb0486630 100644
--- a/Documentation/devicetree/bindings/arm/topology.txt
+++ b/Documentation/devicetree/bindings/arm/topology.txt
@@ -29,9 +29,9 @@ corresponding to the system hierarchy; syntactically they are defined as device
 tree nodes.
 
 The remainder of this document provides the topology bindings for ARM, based
-on the ePAPR standard, available from:
+on the Devicetree Specification, available from:
 
-http://www.power.org/documentation/epapr-version-1-1/
+https://www.devicetree.org/specifications/
 
 If not stated otherwise, whenever a reference to a cpu node phandle is made its
 value must point to a cpu node compliant with the cpu node bindings as
diff --git a/Documentation/devicetree/bindings/bus/simple-pm-bus.txt b/Documentation/devicetree/bindings/bus/simple-pm-bus.txt
index d032237512c2..6f15037131ed 100644
--- a/Documentation/devicetree/bindings/bus/simple-pm-bus.txt
+++ b/Documentation/devicetree/bindings/bus/simple-pm-bus.txt
@@ -10,7 +10,7 @@ enabled for child devices connected to the bus (either on-SoC or externally)
 to function.
 
 While "simple-pm-bus" follows the "simple-bus" set of properties, as specified
-in ePAPR, it is not an extension of "simple-bus".
+in the Devicetree Specification, it is not an extension of "simple-bus".
 
 
 Required properties:
diff --git a/Documentation/devicetree/bindings/chosen.txt b/Documentation/devicetree/bindings/chosen.txt
index b5e39af4ddc0..dee3f5d9df26 100644
--- a/Documentation/devicetree/bindings/chosen.txt
+++ b/Documentation/devicetree/bindings/chosen.txt
@@ -10,7 +10,8 @@ stdout-path property
 --------------------
 
 Device trees may specify the device to be used for boot console output
-with a stdout-path property under /chosen, as described in ePAPR, e.g.
+with a stdout-path property under /chosen, as described in the Devicetree
+Specification, e.g.
 
 / {
 	chosen {
diff --git a/Documentation/devicetree/bindings/common-properties.txt b/Documentation/devicetree/bindings/common-properties.txt
index 3193979b1d05..697714f8d75c 100644
--- a/Documentation/devicetree/bindings/common-properties.txt
+++ b/Documentation/devicetree/bindings/common-properties.txt
@@ -1,6 +1,6 @@
 Common properties
 
-The ePAPR specification does not define any properties related to hardware
+The Devicetree Specification does not define any properties related to hardware
 byteswapping, but endianness issues show up frequently in porting Linux to
 different machine types.  This document attempts to provide a consistent
 way of handling byteswapping across drivers.
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
index 10a425f451fc..7aef0eae58d4 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec4.txt
@@ -118,8 +118,8 @@ PROPERTIES
       Definition: A list of clock name strings in the same order as the
           clocks property.
 
-   Note: All other standard properties (see the ePAPR) are allowed
-   but are optional.
+   Note: All other standard properties (see the Devicetree Specification)
+   are allowed but are optional.
 
 
 EXAMPLE
diff --git a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt
index baf8a3c1b469..73b0eb950bb3 100644
--- a/Documentation/devicetree/bindings/crypto/fsl-sec6.txt
+++ b/Documentation/devicetree/bindings/crypto/fsl-sec6.txt
@@ -55,8 +55,8 @@ PROPERTIES
            triplet that includes the child address, parent address, &
            length.
 
-   Note: All other standard properties (see the ePAPR) are allowed
-   but are optional.
+   Note: All other standard properties (see the Devicetree Specification)
+   are allowed but are optional.
 
 EXAMPLE
 	crypto@a0000 {
diff --git a/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt b/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt
index 909a902dff85..ccbbfdc53c72 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/open-pic.txt
@@ -92,7 +92,6 @@ Example 2:
 
 * References
 
-[1] Power.org (TM) Standard for Embedded Power Architecture (TM) Platform
-    Requirements (ePAPR), Version 1.0, July 2008.
-    (http://www.power.org/resources/downloads/Power_ePAPR_APPROVED_v1.0.pdf)
+[1] Devicetree Specification
+    (https://www.devicetree.org/specifications/)
 
diff --git a/Documentation/devicetree/bindings/net/ethernet.txt b/Documentation/devicetree/bindings/net/ethernet.txt
index 3a6916909d90..08dd263beeb9 100644
--- a/Documentation/devicetree/bindings/net/ethernet.txt
+++ b/Documentation/devicetree/bindings/net/ethernet.txt
@@ -8,7 +8,8 @@ The following properties are common to the Ethernet controllers:
   property;
 - max-speed: number, specifies maximum speed in Mbit/s supported by the device;
 - max-frame-size: number, maximum transfer unit (IEEE defined MTU), rather than
-  the maximum frame size (there's contradiction in ePAPR).
+  the maximum frame size (there's contradiction in the Devicetree
+  Specification).
 - phy-mode: string, operation mode of the PHY interface. This is now a de-facto
   standard property; supported values are:
   * "mii"
@@ -32,9 +33,11 @@ The following properties are common to the Ethernet controllers:
   * "2000base-x",
   * "2500base-x",
   * "rxaui"
-- phy-connection-type: the same as "phy-mode" property but described in ePAPR;
+- phy-connection-type: the same as "phy-mode" property but described in the
+  Devicetree Specification;
 - phy-handle: phandle, specifies a reference to a node representing a PHY
-  device; this property is described in ePAPR and so preferred;
+  device; this property is described in the Devicetree Specification and so
+  preferred;
 - phy: the same as "phy-handle" property, not recommended for new bindings.
 - phy-device: the same as "phy-handle" property, not recommended for new
   bindings.
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
index f8cd2397aa04..d63ab1dec16d 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/cpus.txt
@@ -3,10 +3,10 @@ Power Architecture CPU Binding
 Copyright 2013 Freescale Semiconductor Inc.
 
 Power Architecture CPUs in Freescale SOCs are represented in device trees as
-per the definition in ePAPR.
+per the definition in the Devicetree Specification.
 
-In addition to the ePAPR definitions, the properties defined below may be
-present on CPU nodes.
+In addition to the the Devicetree Specification definitions, the properties
+defined below may be present on CPU nodes.
 
 PROPERTIES
 
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt b/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt
index dc9bb3182525..8a70696395a7 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/l2cache.txt
@@ -1,7 +1,7 @@
 Freescale L2 Cache Controller
 
 L2 cache is present in Freescale's QorIQ and QorIQ Qonverge platforms.
-The cache bindings explained below are ePAPR compliant
+The cache bindings explained below are Devicetree Specification compliant
 
 Required Properties:
 
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt b/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt
index b9a8a2bcfae7..0496ada4bba4 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/srio-rmu.txt
@@ -124,8 +124,8 @@ Port-Write Unit:
 		A single IRQ that handles port-write conditions is
 		specified by this property.  (Typically shared with error).
 
-   Note: All other standard properties (see the ePAPR) are allowed
-   but are optional.
+   Note: All other standard properties (see the Devicetree Specification)
+   are allowed but are optional.
 
 Example:
 	rmu: rmu@d3000 {
diff --git a/Documentation/devicetree/bindings/powerpc/fsl/srio.txt b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
index 07abf0f2f440..86ee6ea73754 100644
--- a/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
+++ b/Documentation/devicetree/bindings/powerpc/fsl/srio.txt
@@ -72,7 +72,8 @@ the following properties:
 		represents the LIODN associated with maintenance transactions
 		for the port.
 
-Note: All other standard properties (see ePAPR) are allowed but are optional.
+Note: All other standard properties (see the Devicetree Specification)
+are allowed but are optional.
 
 Example: