Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux

Pull drm updates from Dave Airlie:
 "This is the main drm pull request for 4.6 kernel.

  Overall the coolest thing here for me is the nouveau maxwell signed
  firmware support from NVidia, it's taken a long while to extract this
  from them.

  I also wish the ARM vendors just designed one set of display IP, ARM
  display block proliferation is definitely increasing.

  Core:
     - drm_event cleanups
     - Internal API cleanup making mode_fixup optional.
     - Apple GMUX vga switcheroo support.
     - DP AUX testing interface

  Panel:
     - Refactoring of DSI core for use over more transports.

  New driver:
     - ARM hdlcd driver

  i915:
     - FBC/PSR (framebuffer compression, panel self refresh) enabled by default.
     - Ongoing atomic display support work
     - Ongoing runtime PM work
     - Pixel clock limit checks
     - VBT DSI description support
     - GEM fixes
     - GuC firmware scheduler enhancements

  amdkfd:
     - Deferred probing fixes to avoid make file or link ordering.

  amdgpu/radeon:
     - ACP support for i2s audio support.
     - Command Submission/GPU scheduler/GPUVM optimisations
     - Initial GPU reset support for amdgpu

  vmwgfx:
     - Support for DX10 gen mipmaps
     - Pageflipping and other fixes.

  exynos:
     - Exynos5420 SoC support for FIMD
     - Exynos5422 SoC support for MIPI-DSI

  nouveau:
     - GM20x secure boot support - adds acceleration for Maxwell GPUs.
     - GM200 support
     - GM20B clock driver support
     - Power sensors work

  etnaviv:
     - Correctness fixes for GPU cache flushing
     - Better support for i.MX6 systems.

  imx-drm:
     - VBlank IRQ support
     - Fence support
     - OF endpoint support

  msm:
     - HDMI support for 8996 (snapdragon 820)
     - Adreno 430 support
     - Timestamp queries support

  virtio-gpu:
     - Fixes for Android support.

  rockchip:
     - Add support for Innosilicion HDMI

  rcar-du:
     - Support for 4 crtcs
     - R8A7795 support
     - RCar Gen 3 support

  omapdrm:
     - HDMI interlace output support
     - dma-buf import support
     - Refactoring to remove a lot of legacy code.

  tilcdc:
     - Rewrite of pageflipping code
     - dma-buf support
     - pinctrl support

  vc4:
     - HDMI modesetting bug fixes
     - Significant 3D performance improvement.

  fsl-dcu (FreeScale):
     - Lots of fixes

  tegra:
     - Two small fixes

  sti:
     - Atomic support for planes
     - Improved HDMI support"

* 'drm-next' of git://people.freedesktop.org/~airlied/linux: (1063 commits)
  drm/amdgpu: release_pages requires linux/pagemap.h
  drm/sti: restore mode_fixup callback
  drm/amdgpu/gfx7: add MTYPE definition
  drm/amdgpu: removing BO_VAs shouldn't be interruptible
  drm/amd/powerplay: show uvd/vce power gate enablement for tonga.
  drm/amd/powerplay: show uvd/vce power gate info for fiji
  drm/amdgpu: use sched fence if possible
  drm/amdgpu: move ib.fence to job.fence
  drm/amdgpu: give a fence param to ib_free
  drm/amdgpu: include the right version of gmc header files for iceland
  drm/radeon: fix indentation.
  drm/amd/powerplay: add uvd/vce dpm enabling flag to fix the performance issue for CZ
  drm/amdgpu: switch back to 32bit hw fences v2
  drm/amdgpu: remove amdgpu_fence_is_signaled
  drm/amdgpu: drop the extra fence range check v2
  drm/amdgpu: signal fences directly in amdgpu_fence_process
  drm/amdgpu: cleanup amdgpu_fence_wait_empty v2
  drm/amdgpu: keep all fences in an RCU protected array v2
  drm/amdgpu: add number of hardware submissions to amdgpu_fence_driver_init_ring
  drm/amdgpu: RCU protected amd_sched_fence_release
  ...

9 files changed, 170 insertions, 13 deletions

diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
index 56a961aa5061..9f97df4d5152 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
+++ b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
@@ -35,6 +35,12 @@ Optional properties for HDMI:
 		  as an interrupt/status bit in the HDMI controller
 		  itself).  See bindings/pinctrl/brcm,bcm2835-gpio.txt
 
+Required properties for V3D:
+- compatible:	Should be "brcm,bcm2835-v3d"
+- reg:		Physical base address and length of the V3D's registers
+- interrupts:	The interrupt number
+		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
+
 Example:
 pixelvalve@7e807000 {
 	compatible = "brcm,bcm2835-pixelvalve2";
@@ -60,6 +66,12 @@ hdmi: hdmi@7e902000 {
 	clock-names = "pixel", "hdmi";
 };
 
+v3d: v3d@7ec00000 {
+	compatible = "brcm,bcm2835-v3d";
+	reg = <0x7ec00000 0x1000>;
+	interrupts = <1 10>;
+};
+
 vc4: gpu {
 	compatible = "brcm,bcm2835-vc4";
 };
diff --git a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
index 0e6f0c024858..22756b3dede2 100644
--- a/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
+++ b/Documentation/devicetree/bindings/display/exynos/exynos_dsim.txt
@@ -6,6 +6,7 @@ Required properties:
 		"samsung,exynos4210-mipi-dsi" /* for Exynos4 SoCs */
 		"samsung,exynos4415-mipi-dsi" /* for Exynos4415 SoC */
 		"samsung,exynos5410-mipi-dsi" /* for Exynos5410/5420/5440 SoCs */
+		"samsung,exynos5422-mipi-dsi" /* for Exynos5422/5800 SoCs */
 		"samsung,exynos5433-mipi-dsi" /* for Exynos5433 SoCs */
   - reg: physical base address and length of the registers set for the device
   - interrupts: should contain DSI interrupt
diff --git a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
index 27c3ce0db16a..c7c6b9af87ac 100644
--- a/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
+++ b/Documentation/devicetree/bindings/display/exynos/samsung-fimd.txt
@@ -12,7 +12,8 @@ Required properties:
 		"samsung,exynos3250-fimd"; /* for Exynos3250/3472 SoCs */
 		"samsung,exynos4210-fimd"; /* for Exynos4 SoCs */
 		"samsung,exynos4415-fimd"; /* for Exynos4415 SoC */
-		"samsung,exynos5250-fimd"; /* for Exynos5 SoCs */
+		"samsung,exynos5250-fimd"; /* for Exynos5250 SoCs */
+		"samsung,exynos5420-fimd"; /* for Exynos5420/5422/5800 SoCs */
 
 - reg: physical base address and length of the FIMD registers set.
 
diff --git a/Documentation/devicetree/bindings/display/msm/dsi.txt b/Documentation/devicetree/bindings/display/msm/dsi.txt
index e7423bea1424..f5948c48b9a2 100644
--- a/Documentation/devicetree/bindings/display/msm/dsi.txt
+++ b/Documentation/devicetree/bindings/display/msm/dsi.txt
@@ -44,9 +44,34 @@ Optional properties:
 - pinctrl-names: the pin control state names; should contain "default"
 - pinctrl-0: the default pinctrl state (active)
 - pinctrl-n: the "sleep" pinctrl state
-- port: DSI controller output port. This contains one endpoint subnode, with its
-  remote-endpoint set to the phandle of the connected panel's endpoint.
-  See Documentation/devicetree/bindings/graph.txt for device graph info.
+- port: DSI controller output port, containing one endpoint subnode.
+
+  DSI Endpoint properties:
+  - remote-endpoint: set to phandle of the connected panel's endpoint.
+    See Documentation/devicetree/bindings/graph.txt for device graph info.
+  - qcom,data-lane-map: this describes how the logical DSI lanes are mapped
+    to the physical lanes on the given platform. The value contained in
+    index n describes what logical data lane is mapped to the physical data
+    lane n (DATAn, where n lies between 0 and 3).
+
+    For example:
+
+    qcom,data-lane-map = <3 0 1 2>;
+
+    The above mapping describes that the logical data lane DATA3 is mapped to
+    the physical data lane DATA0, logical DATA0 to physical DATA1, logic DATA1
+    to phys DATA2 and logic DATA2 to phys DATA3.
+
+    There are only a limited number of physical to logical mappings possible:
+
+    "0123": Logic 0->Phys 0; Logic 1->Phys 1; Logic 2->Phys 2; Logic 3->Phys 3;
+    "3012": Logic 3->Phys 0; Logic 0->Phys 1; Logic 1->Phys 2; Logic 2->Phys 3;
+    "2301": Logic 2->Phys 0; Logic 3->Phys 1; Logic 0->Phys 2; Logic 1->Phys 3;
+    "1230": Logic 1->Phys 0; Logic 2->Phys 1; Logic 3->Phys 2; Logic 0->Phys 3;
+    "0321": Logic 0->Phys 0; Logic 3->Phys 1; Logic 2->Phys 2; Logic 1->Phys 3;
+    "1032": Logic 1->Phys 0; Logic 0->Phys 1; Logic 3->Phys 2; Logic 2->Phys 3;
+    "2103": Logic 2->Phys 0; Logic 1->Phys 1; Logic 0->Phys 2; Logic 3->Phys 3;
+    "3210": Logic 3->Phys 0; Logic 2->Phys 1; Logic 1->Phys 2; Logic 0->Phys 3;
 
 DSI PHY:
 Required properties:
@@ -131,6 +156,7 @@ Example:
 		port {
 			dsi0_out: endpoint {
 				remote-endpoint = <&panel_in>;
+				lanes = <0 1 2 3>;
 			};
 		};
 	};
diff --git a/Documentation/devicetree/bindings/display/msm/hdmi.txt b/Documentation/devicetree/bindings/display/msm/hdmi.txt
index 379ee2ea9a3d..b63f614e0c04 100644
--- a/Documentation/devicetree/bindings/display/msm/hdmi.txt
+++ b/Documentation/devicetree/bindings/display/msm/hdmi.txt
@@ -11,6 +11,7 @@ Required properties:
 - reg: Physical base address and length of the controller's registers
 - reg-names: "core_physical"
 - interrupts: The interrupt signal from the hdmi block.
+- power-domains: Should be <&mmcc MDSS_GDSC>.
 - clocks: device clocks
   See ../clocks/clock-bindings.txt for details.
 - qcom,hdmi-tx-ddc-clk-gpio: ddc clk pin
@@ -18,6 +19,8 @@ Required properties:
 - qcom,hdmi-tx-hpd-gpio: hpd pin
 - core-vdda-supply: phandle to supply regulator
 - hdmi-mux-supply: phandle to mux regulator
+- phys: the phandle for the HDMI PHY device
+- phy-names: the name of the corresponding PHY device
 
 Optional properties:
 - qcom,hdmi-tx-mux-en-gpio: hdmi mux enable pin
@@ -27,15 +30,38 @@ Optional properties:
 - pinctrl-0: the default pinctrl state (active)
 - pinctrl-1: the "sleep" pinctrl state
 
+HDMI PHY:
+Required properties:
+- compatible: Could be the following
+  * "qcom,hdmi-phy-8660"
+  * "qcom,hdmi-phy-8960"
+  * "qcom,hdmi-phy-8974"
+  * "qcom,hdmi-phy-8084"
+  * "qcom,hdmi-phy-8996"
+- #phy-cells: Number of cells in a PHY specifier; Should be 0.
+- reg: Physical base address and length of the registers of the PHY sub blocks.
+- reg-names: The names of register regions. The following regions are required:
+  * "hdmi_phy"
+  * "hdmi_pll"
+  For HDMI PHY on msm8996, these additional register regions are required:
+    * "hdmi_tx_l0"
+    * "hdmi_tx_l1"
+    * "hdmi_tx_l3"
+    * "hdmi_tx_l4"
+- power-domains: Should be <&mmcc MDSS_GDSC>.
+- clocks: device clocks
+  See Documentation/devicetree/bindings/clocks/clock-bindings.txt for details.
+- core-vdda-supply: phandle to vdda regulator device node
+
 Example:
 
 / {
 	...
 
-	hdmi: qcom,hdmi-tx-8960@4a00000 {
+	hdmi: hdmi@4a00000 {
 		compatible = "qcom,hdmi-tx-8960";
 		reg-names = "core_physical";
-		reg = <0x04a00000 0x1000>;
+		reg = <0x04a00000 0x2f0>;
 		interrupts = <GIC_SPI 79 0>;
 		power-domains = <&mmcc MDSS_GDSC>;
 		clock-names =
@@ -54,5 +80,21 @@ Example:
 		pinctrl-names = "default", "sleep";
 		pinctrl-0 = <&hpd_active  &ddc_active  &cec_active>;
 		pinctrl-1 = <&hpd_suspend &ddc_suspend &cec_suspend>;
+
+		phys = <&hdmi_phy>;
+		phy-names = "hdmi_phy";
+	};
+
+	hdmi_phy: phy@4a00400 {
+		compatible = "qcom,hdmi-phy-8960";
+		reg-names = "hdmi_phy",
+			    "hdmi_pll";
+		reg = <0x4a00400 0x60>,
+		      <0x4a00500 0x100>;
+		#phy-cells = <0>;
+		power-domains = <&mmcc MDSS_GDSC>;
+		clock-names = "slave_iface_clk";
+		clocks = <&mmcc HDMI_S_AHB_CLK>;
+		core-vdda-supply = <&pm8921_hdmi_mvs>;
 	};
 };
diff --git a/Documentation/devicetree/bindings/display/panel/lg,lp120up1.txt b/Documentation/devicetree/bindings/display/panel/lg,lp120up1.txt
new file mode 100644
index 000000000000..8c5de692c55c
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/lg,lp120up1.txt
@@ -0,0 +1,7 @@
+LG 12.0" (1920x1280 pixels) TFT LCD panel
+
+Required properties:
+- compatible: should be "lg,lp120up1"
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/panel/urt,umsh-8596md.txt b/Documentation/devicetree/bindings/display/panel/urt,umsh-8596md.txt
new file mode 100644
index 000000000000..088a6cea5015
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/urt,umsh-8596md.txt
@@ -0,0 +1,16 @@
+United Radiant Technology UMSH-8596MD-xT 7.0" WVGA TFT LCD panel
+
+Supported are LVDS versions (-11T, -19T) and parallel ones
+(-T, -1T, -7T, -20T).
+
+Required properties:
+- compatible: should be one of:
+  "urt,umsh-8596md-t",
+  "urt,umsh-8596md-1t",
+  "urt,umsh-8596md-7t",
+  "urt,umsh-8596md-11t",
+  "urt,umsh-8596md-19t",
+  "urt,umsh-8596md-20t".
+
+This binding is compatible with the simple-panel binding, which is specified
+in simple-panel.txt in this directory.
diff --git a/Documentation/devicetree/bindings/display/renesas,du.txt b/Documentation/devicetree/bindings/display/renesas,du.txt
index eccd4f4867b2..0d30e42e40be 100644
--- a/Documentation/devicetree/bindings/display/renesas,du.txt
+++ b/Documentation/devicetree/bindings/display/renesas,du.txt
@@ -8,6 +8,7 @@ Required Properties:
     - "renesas,du-r8a7791" for R8A7791 (R-Car M2-W) compatible DU
     - "renesas,du-r8a7793" for R8A7793 (R-Car M2-N) compatible DU
     - "renesas,du-r8a7794" for R8A7794 (R-Car E2) compatible DU
+    - "renesas,du-r8a7795" for R8A7795 (R-Car H3) compatible DU
 
   - reg: A list of base address and length of each memory resource, one for
     each entry in the reg-names property.
@@ -24,7 +25,7 @@ Required Properties:
   - clock-names: Name of the clocks. This property is model-dependent.
     - R8A7779 uses a single functional clock. The clock doesn't need to be
       named.
-    - R8A779[0134] use one functional clock per channel and one clock per LVDS
+    - R8A779[01345] use one functional clock per channel and one clock per LVDS
       encoder (if available). The functional clocks must be named "du.x" with
       "x" being the channel numerical index. The LVDS clocks must be named
       "lvds.x" with "x" being the LVDS encoder numerical index.
@@ -41,13 +42,14 @@ bindings specified in Documentation/devicetree/bindings/graph.txt.
 The following table lists for each supported model the port number
 corresponding to each DU output.
 
-		Port 0		Port1		Port2
+		Port 0		Port1		Port2		Port3
 -----------------------------------------------------------------------------
- R8A7779 (H1)	DPAD 0		DPAD 1		-
- R8A7790 (H2)	DPAD		LVDS 0		LVDS 1
- R8A7791 (M2-W)	DPAD		LVDS 0		-
- R8A7793 (M2-N)	DPAD		LVDS 0		-
- R8A7794 (E2)	DPAD 0		DPAD 1		-
+ R8A7779 (H1)	DPAD 0		DPAD 1		-		-
+ R8A7790 (H2)	DPAD		LVDS 0		LVDS 1		-
+ R8A7791 (M2-W)	DPAD		LVDS 0		-		-
+ R8A7793 (M2-N)	DPAD		LVDS 0		-		-
+ R8A7794 (E2)	DPAD 0		DPAD 1		-		-
+ R8A7795 (H3)	DPAD		HDMI 0		HDMI 1		LVDS
 
 
 Example: R8A7790 (R-Car H2) DU
diff --git a/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt
new file mode 100644
index 000000000000..8096a29f9776
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/rockchip/inno_hdmi-rockchip.txt
@@ -0,0 +1,50 @@
+Rockchip specific extensions to the Innosilicon HDMI
+================================
+
+Required properties:
+- compatible:
+	"rockchip,rk3036-inno-hdmi";
+- reg:
+	Physical base address and length of the controller's registers.
+- clocks, clock-names:
+	Phandle to hdmi controller clock, name should be "pclk"
+- interrupts:
+	HDMI interrupt number
+- ports:
+	Contain one port node with endpoint definitions as defined in
+	Documentation/devicetree/bindings/graph.txt.
+- pinctrl-0, pinctrl-name:
+	Switch the iomux of HPD/CEC pins to HDMI function.
+
+Example:
+hdmi: hdmi@20034000 {
+	compatible = "rockchip,rk3036-inno-hdmi";
+	reg = <0x20034000 0x4000>;
+	interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&cru  PCLK_HDMI>;
+	clock-names = "pclk";
+	pinctrl-names = "default";
+	pinctrl-0 = <&hdmi_ctl>;
+	status = "disabled";
+
+	hdmi_in: port {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		hdmi_in_lcdc: endpoint@0 {
+			reg = <0>;
+			remote-endpoint = <&lcdc_out_hdmi>;
+		};
+	};
+};
+
+&pinctrl {
+	hdmi {
+		hdmi_ctl: hdmi-ctl {
+			rockchip,pins = <1 8  RK_FUNC_1 &pcfg_pull_none>,
+					<1 9  RK_FUNC_1 &pcfg_pull_none>,
+					<1 10 RK_FUNC_1 &pcfg_pull_none>,
+					<1 11 RK_FUNC_1 &pcfg_pull_none>;
+		};
+	};
+
+};