Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net

6 files changed, 111 insertions, 9 deletions

diff --git a/Documentation/devicetree/bindings/arm/armada-38x.txt b/Documentation/devicetree/bindings/arm/armada-38x.txt
index 11f2330a6554..ad9f8ed4d9bd 100644
--- a/Documentation/devicetree/bindings/arm/armada-38x.txt
+++ b/Documentation/devicetree/bindings/arm/armada-38x.txt
@@ -6,5 +6,15 @@ following property:
 
 Required root node property:
 
- - compatible: must contain either "marvell,armada380" or
-   "marvell,armada385" depending on the variant of the SoC being used.
+ - compatible: must contain "marvell,armada380"
+
+In addition, boards using the Marvell Armada 385 SoC shall have the
+following property before the previous one:
+
+Required root node property:
+
+compatible: must contain "marvell,armada385"
+
+Example:
+
+compatible = "marvell,a385-rd", "marvell,armada385", "marvell,armada380";
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
index 5d49f2b37f68..832fe8cc24d7 100644
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
+++ b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
@@ -48,7 +48,7 @@ adc@12D10000 {
 
 	/* NTC thermistor is a hwmon device */
 	ncp15wb473@0 {
-		compatible = "ntc,ncp15wb473";
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
 		pulldown-ohm = <0>;
diff --git a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
index c6f66674f19c..b117b2e9e1a7 100644
--- a/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
+++ b/Documentation/devicetree/bindings/hwmon/ntc_thermistor.txt
@@ -3,11 +3,19 @@ NTC Thermistor hwmon sensors
 
 Requires node properties:
 - "compatible" value : one of
-	"ntc,ncp15wb473"
-	"ntc,ncp18wb473"
-	"ntc,ncp21wb473"
-	"ntc,ncp03wb473"
-	"ntc,ncp15wl333"
+	"murata,ncp15wb473"
+	"murata,ncp18wb473"
+	"murata,ncp21wb473"
+	"murata,ncp03wb473"
+	"murata,ncp15wl333"
+
+/* Usage of vendor name "ntc" is deprecated */
+<DEPRECATED>	"ntc,ncp15wb473"
+<DEPRECATED>	"ntc,ncp18wb473"
+<DEPRECATED>	"ntc,ncp21wb473"
+<DEPRECATED>	"ntc,ncp03wb473"
+<DEPRECATED>	"ntc,ncp15wl333"
+
 - "pullup-uv"	Pull up voltage in micro volts
 - "pullup-ohm"	Pull up resistor value in ohms
 - "pulldown-ohm" Pull down resistor value in ohms
@@ -21,7 +29,7 @@ Read more about iio bindings at
 
 Example:
 	ncp15wb473@0 {
-		compatible = "ntc,ncp15wb473";
+		compatible = "murata,ncp15wb473";
 		pullup-uv = <1800000>;
 		pullup-ohm = <47000>;
 		pulldown-ohm = <0>;
diff --git a/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
new file mode 100644
index 000000000000..dde6c22ce91a
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-rk3x.txt
@@ -0,0 +1,42 @@
+* Rockchip RK3xxx I2C controller
+
+This driver interfaces with the native I2C controller present in Rockchip
+RK3xxx SoCs.
+
+Required properties :
+
+ - reg : Offset and length of the register set for the device
+ - compatible : should be "rockchip,rk3066-i2c", "rockchip,rk3188-i2c" or
+		"rockchip,rk3288-i2c".
+ - interrupts : interrupt number
+ - clocks : parent clock
+
+Required on RK3066, RK3188 :
+
+ - rockchip,grf : the phandle of the syscon node for the general register
+		  file (GRF)
+ - on those SoCs an alias with the correct I2C bus ID (bit offset in the GRF)
+   is also required.
+
+Optional properties :
+
+ - clock-frequency : SCL frequency to use (in Hz). If omitted, 100kHz is used.
+
+Example:
+
+aliases {
+	i2c0 = &i2c0;
+}
+
+i2c0: i2c@2002d000 {
+	compatible = "rockchip,rk3188-i2c";
+	reg = <0x2002d000 0x1000>;
+	interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	rockchip,grf = <&grf>;
+
+	clock-names = "i2c";
+	clocks = <&cru PCLK_I2C0>;
+};
diff --git a/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt b/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt
new file mode 100644
index 000000000000..6b765485af7d
--- /dev/null
+++ b/Documentation/devicetree/bindings/i2c/i2c-sunxi-p2wi.txt
@@ -0,0 +1,41 @@
+
+* Allwinner P2WI (Push/Pull 2 Wire Interface) controller
+
+Required properties :
+
+ - reg             : Offset and length of the register set for the device.
+ - compatible      : Should one of the following:
+                     - "allwinner,sun6i-a31-p2wi"
+ - interrupts      : The interrupt line connected to the P2WI peripheral.
+ - clocks          : The gate clk connected to the P2WI peripheral.
+ - resets          : The reset line connected to the P2WI peripheral.
+
+Optional properties :
+
+ - clock-frequency : Desired P2WI bus clock frequency in Hz. If not set the
+default frequency is 100kHz
+
+A P2WI may contain one child node encoding a P2WI slave device.
+
+Slave device properties:
+  Required properties:
+   - reg           : the I2C slave address used during the initialization
+                     process to switch from I2C to P2WI mode
+
+Example:
+
+	p2wi@01f03400 {
+		compatible = "allwinner,sun6i-a31-p2wi";
+		reg = <0x01f03400 0x400>;
+		interrupts = <0 39 4>;
+		clocks = <&apb0_gates 3>;
+		clock-frequency = <6000000>;
+		resets = <&apb0_rst 3>;
+
+		axp221: pmic@68 {
+			compatible = "x-powers,axp221";
+			reg = <0x68>;
+
+			/* ... */
+		};
+	};
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.txt b/Documentation/devicetree/bindings/vendor-prefixes.txt
index 4d7f3758d1b4..46a311e728a8 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.txt
+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
@@ -83,6 +83,7 @@ mosaixtech	Mosaix Technologies, Inc.
 moxa	Moxa
 mpl	MPL AG
 mundoreader	Mundo Reader S.L.
+murata	Murata Manufacturing Co., Ltd.
 mxicy	Macronix International Co., Ltd.
 national	National Semiconductor
 neonode		Neonode Inc.