diff options
| author | Sylwester Nawrocki <s.nawrocki@samsung.com> | 2015-01-16 18:30:37 +0100 |
|---|---|---|
| committer | Kishon Vijay Abraham I <kishon@ti.com> | 2015-01-30 11:36:48 +0100 |
| commit | e4b3d38088df6f3acd40259c8ec32c9bd3bfe3da (patch) | |
| tree | b95d215c79ce0d6d620155ca3f38f729c6a5cbfd /Documentation/devicetree | |
| parent | phy: add a driver for the Rockchip SoC internal USB2.0 PHY (diff) | |
| download | linux-e4b3d38088df6f3acd40259c8ec32c9bd3bfe3da.tar.xz linux-e4b3d38088df6f3acd40259c8ec32c9bd3bfe3da.zip | |
phy: exynos-video-mipi: Fix regression by adding support for PMU regmap
After the Exynos Power Management Unit (PMU) driver was converted
to the platform device driver in commit 14fc8b93d47323561edf5d482
("ARM: EXYNOS: Add platform driver support for Exynos PMU") and
then PMU device nodes added to Exynos4 DTs in commit
7b9613aca42a5522d269 ("ARM: dts: add PMU syscon node for exynos4")
the mipi video phy driver started failing probing, due to overlapping
memory mapped register region resources.
Now all the Exynos peripheral devices which have registers in the PMU
region are supposed to use the regmap provided by the syscon driver.
So support for regmap is added in this patch, this unfortunately
creates yet another indirection into that supposedly trivial driver.
The additional mutex is required because single register is used by
PHY pairs (they share bit in a register). An improvement here could
be to allow a PHY instance be created with a driver custom mutex,
which would then be common for each PHY pair. This would eliminate
one of 3 mutexes which need to be taken in the phy_power_on/
phy_power_off code path. However, I tried to keep this bug fix patch
possibly simple.
This change is needed to make MIPI DSI displays and MIPI CSI-2
camera sensors working again on Exynos4 boards.
Cc: Pankaj Dubey <pankaj.dubey@samsung.com>
Cc: Kukjin Kim <kgene.kim@samsung.com>
Signed-off-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Diffstat (limited to 'Documentation/devicetree')
| -rw-r--r-- | Documentation/devicetree/bindings/phy/samsung-phy.txt | 2 |
1 files changed, 1 insertions, 1 deletions
diff --git a/Documentation/devicetree/bindings/phy/samsung-phy.txt b/Documentation/devicetree/bindings/phy/samsung-phy.txt index d5bad920827f..91e38cfe1f8f 100644 --- a/Documentation/devicetree/bindings/phy/samsung-phy.txt +++ b/Documentation/devicetree/bindings/phy/samsung-phy.txt @@ -3,8 +3,8 @@ Samsung S5P/EXYNOS SoC series MIPI CSIS/DSIM DPHY Required properties: - compatible : should be "samsung,s5pv210-mipi-video-phy"; -- reg : offset and length of the MIPI DPHY register set; - #phy-cells : from the generic phy bindings, must be 1; +- syscon - phandle to the PMU system controller; For "samsung,s5pv210-mipi-video-phy" compatible PHYs the second cell in the PHY specifier identifies the PHY and its meaning is as follows: |