Merge tag 'drm-misc-next-2017-05-16' of git://anongit.freedesktop.org/git/drm-misc into drm-next

UAPI Changes:
- Return -ENODEV instead of -ENXIO when creating cma fb w/o valid gem (Daniel)
- Add aspect ratio and custom scaling propertis to connector state (Maarten)

Cross-subsystem Changes:
- None

Core Changes:
- Add Laurent as bridge reviewer and Andrzej as bridge maintainer (Archit)
- Maintain new STM driver through -misc (Yannick)
- Misc doc improvements (as is tradition) (Daniel)
- Add driver-private objects to atomic state (Dhinakaran)
- Deprecate preclose hook in modern drivers (use postclose) (Daniel)
- Add hwmode to vblank struct. This fixes mode access in irq context and reduced
  a bunch of boilerplate (Daniel)

Driver Changes:
- vc4: Add out-fence support to vc4 V3D rendering (Eric)
- stm: Add stm32f429 display hw and am-480272h3tmqw-t01h panel support (Yannick)
- vc4: Remove 256MB cma limit from vc4 (Eric)
- dw-hdmi: Disable audio when inactive, instead of always enabled (Romain)
- zte: Add support for VGA to the ZTE driver (Shawn)
- i915: Track DP MST bandwidth and check it in atomic_check (Dhinakaran)
- vgem: Enable gem dmabuf import iface to facilitate ion testing (Laura)
- vc4: Add support for Cygnus (new dt compat string + couple bug fixes) (Eric)
- pl111: Add driver for pl111 CLCD display controller (Eric/Tom)
- vgem: Subclass drm_device instead of standalone platform device (Chris)

Cc: Archit Taneja <architt@codeaurora.org>
Cc: Eric Anholt <eric@anholt.net>
Cc: Yannick Fertre <yannick.fertre@st.com>
Cc: Romain Perier <romain.perier@collabora.com>
Cc: Navare, Manasi D <manasi.d.navare@intel.com>
Cc: Shawn Guo <shawn.guo@linaro.org>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: Laura Abbott <labbott@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Tom Cooksey <tom.cooksey@arm.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>

* tag 'drm-misc-next-2017-05-16' of git://anongit.freedesktop.org/git/drm-misc: (72 commits)
  drm: add missing declaration to drm_blend.h
  drm/dp: Wait up all outstanding tx waiters
  drm/dp: Read the tx msg state once after checking for an event
  drm/prime: Forward declare struct device
  drm/vblank: Lock down vblank->hwmode more
  drm/vblank: drop the mode argument from drm_calc_vbltimestamp_from_scanoutpos
  drm/vblank: Add FIXME comments about moving the vblank ts hooks
  drm/vblank: Switch to bool in_vblank_irq in get_vblank_timestamp
  drm/vblank: Switch drm_driver->get_vblank_timestamp to return a bool
  drm/vgem: Convert to a struct drm_device subclass
  gpu: drm: gma500: remove dead code
  drm/sti: Adjust two checks for null pointers in sti_hqvdp_probe()
  drm/sti: Fix typos in a comment line
  drm/sti: Fix a typo in a comment line
  drm/sti: Replace 17 seq_puts() calls by seq_putc()
  drm/sti: Reduce function calls for sequence output at five places
  drm/sti: use seq_puts to display a string
  drm: Nerf the preclose callback for modern drivers
  drm/exynos: Merge pre/postclose hooks
  drm/tegra: switch to postclose
  ...

3 files changed, 62 insertions, 2 deletions

diff --git a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
index ca02d3e4db91..284e2b14cfbe 100644
--- a/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
+++ b/Documentation/devicetree/bindings/display/brcm,bcm-vc4.txt
@@ -5,7 +5,7 @@ with HDMI output and the HVS (Hardware Video Scaler) for compositing
 display planes.
 
 Required properties for VC4:
-- compatible:	Should be "brcm,bcm2835-vc4"
+- compatible:	Should be "brcm,bcm2835-vc4" or "brcm,cygnus-vc4"
 
 Required properties for Pixel Valve:
 - compatible:	Should be one of "brcm,bcm2835-pixelvalve0",
@@ -54,11 +54,14 @@ Required properties for VEC:
 		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
 
 Required properties for V3D:
-- compatible:	Should be "brcm,bcm2835-v3d"
+- compatible:	Should be "brcm,bcm2835-v3d" or "brcm,cygnus-v3d"
 - reg:		Physical base address and length of the V3D's registers
 - interrupts:	The interrupt number
 		  See bindings/interrupt-controller/brcm,bcm2835-armctrl-ic.txt
 
+Optional properties for V3D:
+- clocks:	The clock the unit runs on
+
 Required properties for DSI:
 - compatible:	Should be "brcm,bcm2835-dsi0" or "brcm,bcm2835-dsi1"
 - reg:		Physical base address and length of the DSI block's registers
diff --git a/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
new file mode 100644
index 000000000000..8e1476941c0f
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/st,stm32-ltdc.txt
@@ -0,0 +1,36 @@
+* STMicroelectronics STM32 lcd-tft display controller
+
+- ltdc: lcd-tft display controller host
+  must be a sub-node of st-display-subsystem
+  Required properties:
+  - compatible: "st,stm32-ltdc"
+  - reg: Physical base address of the IP registers and length of memory mapped region.
+  - clocks: A list of phandle + clock-specifier pairs, one for each
+    entry in 'clock-names'.
+  - clock-names: A list of clock names. For ltdc it should contain:
+      - "lcd" for the clock feeding the output pixel clock & IP clock.
+  - resets: reset to be used by the device (defined by use of RCC macro).
+  Required nodes:
+    - Video port for RGB output.
+
+Example:
+
+/ {
+	...
+	soc {
+	...
+		ltdc: display-controller@40016800 {
+			compatible = "st,stm32-ltdc";
+			reg = <0x40016800 0x200>;
+			interrupts = <88>, <89>;
+			resets = <&rcc STM32F4_APB2_RESET(LTDC)>;
+			clocks = <&rcc 1 CLK_LCD>;
+			clock-names = "lcd";
+
+			port {
+				ltdc_out_rgb: endpoint {
+				};
+			};
+		};
+	};
+};
diff --git a/Documentation/devicetree/bindings/display/zte,vou.txt b/Documentation/devicetree/bindings/display/zte,vou.txt
index 9c356284232b..38476475fd60 100644
--- a/Documentation/devicetree/bindings/display/zte,vou.txt
+++ b/Documentation/devicetree/bindings/display/zte,vou.txt
@@ -58,6 +58,18 @@ Required properties:
    integer cells.  The first cell is the offset of SYSCTRL register used
    to control TV Encoder DAC power, and the second cell is the bit mask.
 
+* VGA output device
+
+Required properties:
+ - compatible: should be "zte,zx296718-vga"
+ - reg: Physical base address and length of the VGA device IO region
+ - interrupts : VGA interrupt number to CPU
+ - clocks: Phandle with clock-specifier pointing to VGA I2C clock.
+ - clock-names: Must be "i2c_wclk".
+ - zte,vga-power-control: the phandle to SYSCTRL block followed by two
+   integer cells.  The first cell is the offset of SYSCTRL register used
+   to control VGA DAC power, and the second cell is the bit mask.
+
 Example:
 
 vou: vou@1440000 {
@@ -81,6 +93,15 @@ vou: vou@1440000 {
 			      "main_wclk", "aux_wclk";
 	};
 
+	vga: vga@8000 {
+		compatible = "zte,zx296718-vga";
+		reg = <0x8000 0x1000>;
+		interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
+		clocks = <&topcrm VGA_I2C_WCLK>;
+		clock-names = "i2c_wclk";
+		zte,vga-power-control = <&sysctrl 0x170 0xe0>;
+	};
+
 	hdmi: hdmi@c000 {
 		compatible = "zte,zx296718-hdmi";
 		reg = <0xc000 0x4000>;