Merge tag 'drm-misc-next-2019-08-19' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

drm-misc-next for 5.4:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
  - dma-buf: add reservation_object_fences helper, relax
             reservation_object_add_shared_fence, remove
             reservation_object seq number (and then
             restored)
  - dma-fence: Shrinkage of the dma_fence structure,
               Merge dma_fence_signal and dma_fence_signal_locked,
               Store the timestamp in struct dma_fence in a union with
               cb_list

Driver Changes:
  - More dt-bindings YAML conversions
  - More removal of drmP.h includes
  - dw-hdmi: Support get_eld and various i2s improvements
  - gm12u320: Few fixes
  - meson: Global cleanup
  - panfrost: Few refactors, Support for GPU heap allocations
  - sun4i: Support for DDC enable GPIO
  - New panels: TI nspire, NEC NL8048HL11, LG Philips LB035Q02,
                Sharp LS037V7DW01, Sony ACX565AKM, Toppoly TD028TTEC1
                Toppoly TD043MTEA1

Signed-off-by: Dave Airlie <airlied@redhat.com>
[airlied: fixup dma_resv rename fallout]

From: Maxime Ripard <maxime.ripard@bootlin.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190819141923.7l2adietcr2pioct@flea

8 files changed, 391 insertions, 240 deletions

diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
deleted file mode 100644
index 3a50a7862cf3..000000000000
--- a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.txt
+++ /dev/null
@@ -1,119 +0,0 @@
-Amlogic specific extensions to the Synopsys Designware HDMI Controller
-======================================================================
-
-The Amlogic Meson Synopsys Designware Integration is composed of :
-- A Synopsys DesignWare HDMI Controller IP
-- A TOP control block controlling the Clocks and PHY
-- A custom HDMI PHY in order to convert video to TMDS signal
- ___________________________________
-|            HDMI TOP               |<= HPD
-|___________________________________|
-|                  |                |
-|  Synopsys HDMI   |   HDMI PHY     |=> TMDS
-|    Controller    |________________|
-|___________________________________|<=> DDC
-
-The HDMI TOP block only supports HPD sensing.
-The Synopsys HDMI Controller interrupt is routed through the
-TOP Block interrupt.
-Communication to the TOP Block and the Synopsys HDMI Controller is done
-via a pair of dedicated addr+read/write registers.
-The HDMI PHY is configured by registers in the HHI register block.
-
-Pixel data arrives in 4:4:4 format from the VENC block and the VPU HDMI mux
-selects either the ENCI encoder for the 576i or 480i formats or the ENCP
-encoder for all the other formats including interlaced HD formats.
-
-The VENC uses a DVI encoder on top of the ENCI or ENCP encoders to generate
-DVI timings for the HDMI controller.
-
-Amlogic Meson GXBB, GXL and GXM SoCs families embeds the Synopsys DesignWare
-HDMI TX IP version 2.01a with HDCP and I2C & S/PDIF
-audio source interfaces.
-
-Required properties:
-- compatible: value should be different for each SoC family as :
-	- GXBB (S905) : "amlogic,meson-gxbb-dw-hdmi"
-	- GXL (S905X, S905D) : "amlogic,meson-gxl-dw-hdmi"
-	- GXM (S912) : "amlogic,meson-gxm-dw-hdmi"
-	followed by the common "amlogic,meson-gx-dw-hdmi"
-	- G12A (S905X2, S905Y2, S905D2) : "amlogic,meson-g12a-dw-hdmi"
-- reg: Physical base address and length of the controller's registers.
-- interrupts: The HDMI interrupt number
-- clocks, clock-names : must have the phandles to the HDMI iahb and isfr clocks,
-  and the Amlogic Meson venci clocks as described in
-  Documentation/devicetree/bindings/clock/clock-bindings.txt,
-  the clocks are soc specific, the clock-names should be "iahb", "isfr", "venci"
-- resets, resets-names: must have the phandles to the HDMI apb, glue and phy
-  resets as described in :
-  Documentation/devicetree/bindings/reset/reset.txt,
-  the reset-names should be "hdmitx_apb", "hdmitx", "hdmitx_phy"
-
-Optional properties:
-- hdmi-supply: Optional phandle to an external 5V regulator to power the HDMI
-  logic, as described in the file ../regulator/regulator.txt
-
-Required nodes:
-
-The connections to the HDMI ports are modeled using the OF graph
-bindings specified in Documentation/devicetree/bindings/graph.txt.
-
-The following table lists for each supported model the port number
-corresponding to each HDMI output and input.
-
-		Port 0		Port 1
------------------------------------------
- S905 (GXBB)	VENC Input	TMDS Output
- S905X (GXL)	VENC Input	TMDS Output
- S905D (GXL)	VENC Input	TMDS Output
- S912 (GXM)	VENC Input	TMDS Output
- S905X2 (G12A)	VENC Input	TMDS Output
- S905Y2 (G12A)	VENC Input	TMDS Output
- S905D2 (G12A)	VENC Input	TMDS Output
-
-Example:
-
-hdmi-connector {
-	compatible = "hdmi-connector";
-	type = "a";
-
-	port {
-		hdmi_connector_in: endpoint {
-			remote-endpoint = <&hdmi_tx_tmds_out>;
-		};
-	};
-};
-
-hdmi_tx: hdmi-tx@c883a000 {
-	compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
-	reg = <0x0 0xc883a000 0x0 0x1c>;
-	interrupts = <GIC_SPI 57 IRQ_TYPE_EDGE_RISING>;
-	resets = <&reset RESET_HDMITX_CAPB3>,
-		 <&reset RESET_HDMI_SYSTEM_RESET>,
-		 <&reset RESET_HDMI_TX>;
-	reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
-	clocks = <&clkc CLKID_HDMI_PCLK>,
-		 <&clkc CLKID_CLK81>,
-		 <&clkc CLKID_GCLK_VENCI_INT0>;
-	clock-names = "isfr", "iahb", "venci";
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	/* VPU VENC Input */
-	hdmi_tx_venc_port: port@0 {
-		reg = <0>;
-
-		hdmi_tx_in: endpoint {
-			remote-endpoint = <&hdmi_tx_out>;
-		};
-	};
-
-	/* TMDS Output */
-	hdmi_tx_tmds_port: port@1 {
-		reg = <1>;
-
-		hdmi_tx_tmds_out: endpoint {
-			remote-endpoint = <&hdmi_connector_in>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
new file mode 100644
index 000000000000..fb747682006d
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-dw-hdmi.yaml
@@ -0,0 +1,150 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/amlogic,meson-dw-hdmi.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic specific extensions to the Synopsys Designware HDMI Controller
+
+maintainers:
+  - Neil Armstrong <narmstrong@baylibre.com>
+
+description: |
+  The Amlogic Meson Synopsys Designware Integration is composed of
+  - A Synopsys DesignWare HDMI Controller IP
+  - A TOP control block controlling the Clocks and PHY
+  - A custom HDMI PHY in order to convert video to TMDS signal
+   ___________________________________
+  |            HDMI TOP               |<= HPD
+  |___________________________________|
+  |                  |                |
+  |  Synopsys HDMI   |   HDMI PHY     |=> TMDS
+  |    Controller    |________________|
+  |___________________________________|<=> DDC
+
+  The HDMI TOP block only supports HPD sensing.
+  The Synopsys HDMI Controller interrupt is routed through the
+  TOP Block interrupt.
+  Communication to the TOP Block and the Synopsys HDMI Controller is done
+  via a pair of dedicated addr+read/write registers.
+  The HDMI PHY is configured by registers in the HHI register block.
+
+  Pixel data arrives in "4:4:4" format from the VENC block and the VPU HDMI mux
+  selects either the ENCI encoder for the 576i or 480i formats or the ENCP
+  encoder for all the other formats including interlaced HD formats.
+
+  The VENC uses a DVI encoder on top of the ENCI or ENCP encoders to generate
+  DVI timings for the HDMI controller.
+
+  Amlogic Meson GXBB, GXL and GXM SoCs families embeds the Synopsys DesignWare
+  HDMI TX IP version 2.01a with HDCP and I2C & S/PDIF
+  audio source interfaces.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson-gxbb-dw-hdmi # GXBB (S905)
+              - amlogic,meson-gxl-dw-hdmi # GXL (S905X, S905D)
+              - amlogic,meson-gxm-dw-hdmi # GXM (S912)
+          - const: amlogic,meson-gx-dw-hdmi
+      - enum:
+          - amlogic,meson-g12a-dw-hdmi # G12A (S905X2, S905Y2, S905D2)
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  clocks:
+    minItems: 3
+
+  clock-names:
+    items:
+      - const: isfr
+      - const: iahb
+      - const: venci
+
+  resets:
+    minItems: 3
+
+  reset-names:
+    items:
+      - const: hdmitx_apb
+      - const: hdmitx
+      - const: hdmitx_phy
+
+  hdmi-supply:
+    description: phandle to an external 5V regulator to power the HDMI logic
+    allOf:
+      - $ref: /schemas/types.yaml#/definitions/phandle
+
+  port@0:
+    type: object
+    description:
+      A port node pointing to the VENC Input port node.
+
+  port@1:
+    type: object
+    description:
+      A port node pointing to the TMDS Output port node.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+  "#sound-dai-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - port@0
+  - port@1
+  - "#address-cells"
+  - "#size-cells"
+
+additionalProperties: false
+
+examples:
+  - |
+    hdmi_tx: hdmi-tx@c883a000 {
+        compatible = "amlogic,meson-gxbb-dw-hdmi", "amlogic,meson-gx-dw-hdmi";
+        reg = <0xc883a000 0x1c>;
+        interrupts = <57>;
+        resets = <&reset_apb>, <&reset_hdmitx>, <&reset_hdmitx_phy>;
+        reset-names = "hdmitx_apb", "hdmitx", "hdmitx_phy";
+        clocks = <&clk_isfr>, <&clk_iahb>, <&clk_venci>;
+        clock-names = "isfr", "iahb", "venci";
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* VPU VENC Input */
+        hdmi_tx_venc_port: port@0 {
+            reg = <0>;
+
+            hdmi_tx_in: endpoint {
+                remote-endpoint = <&hdmi_tx_out>;
+            };
+        };
+
+        /* TMDS Output */
+        hdmi_tx_tmds_port: port@1 {
+             reg = <1>;
+
+             hdmi_tx_tmds_out: endpoint {
+                 remote-endpoint = <&hdmi_connector_in>;
+             };
+        };
+    };
+
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
deleted file mode 100644
index be40a780501c..000000000000
--- a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.txt
+++ /dev/null
@@ -1,121 +0,0 @@
-Amlogic Meson Display Controller
-================================
-
-The Amlogic Meson Display controller is composed of several components
-that are going to be documented below:
-
-DMC|---------------VPU (Video Processing Unit)----------------|------HHI------|
-   | vd1   _______     _____________    _________________     |               |
-D  |-------|      |----|            |   |                |    |   HDMI PLL    |
-D  | vd2   | VIU  |    | Video Post |   | Video Encoders |<---|-----VCLK      |
-R  |-------|      |----| Processing |   |                |    |               |
-   | osd2  |      |    |            |---| Enci ----------|----|-----VDAC------|
-R  |-------| CSC  |----| Scalers    |   | Encp ----------|----|----HDMI-TX----|
-A  | osd1  |      |    | Blenders   |   | Encl ----------|----|---------------|
-M  |-------|______|----|____________|   |________________|    |               |
-___|__________________________________________________________|_______________|
-
-
-VIU: Video Input Unit
----------------------
-
-The Video Input Unit is in charge of the pixel scanout from the DDR memory.
-It fetches the frames addresses, stride and parameters from the "Canvas" memory.
-This part is also in charge of the CSC (Colorspace Conversion).
-It can handle 2 OSD Planes and 2 Video Planes.
-
-VPP: Video Post Processing
---------------------------
-
-The Video Post Processing is in charge of the scaling and blending of the
-various planes into a single pixel stream.
-There is a special "pre-blending" used by the video planes with a dedicated
-scaler and a "post-blending" to merge with the OSD Planes.
-The OSD planes also have a dedicated scaler for one of the OSD.
-
-VENC: Video Encoders
---------------------
-
-The VENC is composed of the multiple pixel encoders :
- - ENCI : Interlace Video encoder for CVBS and Interlace HDMI
- - ENCP : Progressive Video Encoder for HDMI
- - ENCL : LCD LVDS Encoder
-The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock
-tree and provides the scanout clock to the VPP and VIU.
-The ENCI is connected to a single VDAC for Composite Output.
-The ENCI and ENCP are connected to an on-chip HDMI Transceiver.
-
-Device Tree Bindings:
----------------------
-
-VPU: Video Processing Unit
---------------------------
-
-Required properties:
-- compatible: value should be different for each SoC family as :
-	- GXBB (S905) : "amlogic,meson-gxbb-vpu"
-	- GXL (S905X, S905D) : "amlogic,meson-gxl-vpu"
-	- GXM (S912) : "amlogic,meson-gxm-vpu"
-	followed by the common "amlogic,meson-gx-vpu"
-	- G12A (S905X2, S905Y2, S905D2) : "amlogic,meson-g12a-vpu"
-- reg: base address and size of he following memory-mapped regions :
-	- vpu
-	- hhi
-- reg-names: should contain the names of the previous memory regions
-- interrupts: should contain the VENC Vsync interrupt number
-- amlogic,canvas: phandle to canvas provider node as described in the file
-	../soc/amlogic/amlogic,canvas.txt
-
-Optional properties:
-- power-domains: Optional phandle to associated power domain as described in
-	the file ../power/power_domain.txt
-
-Required nodes:
-
-The connections to the VPU output video ports are modeled using the OF graph
-bindings specified in Documentation/devicetree/bindings/graph.txt.
-
-The following table lists for each supported model the port number
-corresponding to each VPU output.
-
-		Port 0		Port 1
------------------------------------------
- S905 (GXBB)	CVBS VDAC	HDMI-TX
- S905X (GXL)	CVBS VDAC	HDMI-TX
- S905D (GXL)	CVBS VDAC	HDMI-TX
- S912 (GXM)	CVBS VDAC	HDMI-TX
- S905X2 (G12A)	CVBS VDAC	HDMI-TX
- S905Y2 (G12A)	CVBS VDAC	HDMI-TX
- S905D2 (G12A)	CVBS VDAC	HDMI-TX
-
-Example:
-
-tv-connector {
-	compatible = "composite-video-connector";
-
-	port {
-		tv_connector_in: endpoint {
-			remote-endpoint = <&cvbs_vdac_out>;
-		};
-	};
-};
-
-vpu: vpu@d0100000 {
-	compatible = "amlogic,meson-gxbb-vpu";
-	reg = <0x0 0xd0100000 0x0 0x100000>,
-	      <0x0 0xc883c000 0x0 0x1000>,
-	      <0x0 0xc8838000 0x0 0x1000>;
-	reg-names = "vpu", "hhi", "dmc";
-	interrupts = <GIC_SPI 3 IRQ_TYPE_EDGE_RISING>;
-	#address-cells = <1>;
-	#size-cells = <0>;
-
-	/* CVBS VDAC output port */
-	port@0 {
-		reg = <0>;
-
-		cvbs_vdac_out: endpoint {
-			remote-endpoint = <&tv_connector_in>;
-		};
-	};
-};
diff --git a/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
new file mode 100644
index 000000000000..d1205a6697a0
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/amlogic,meson-vpu.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019 BayLibre, SAS
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/display/amlogic,meson-vpu.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Amlogic Meson Display Controller
+
+maintainers:
+  - Neil Armstrong <narmstrong@baylibre.com>
+
+description: |
+  The Amlogic Meson Display controller is composed of several components
+  that are going to be documented below
+
+  DMC|---------------VPU (Video Processing Unit)----------------|------HHI------|
+     | vd1   _______     _____________    _________________     |               |
+  D  |-------|      |----|            |   |                |    |   HDMI PLL    |
+  D  | vd2   | VIU  |    | Video Post |   | Video Encoders |<---|-----VCLK      |
+  R  |-------|      |----| Processing |   |                |    |               |
+     | osd2  |      |    |            |---| Enci ----------|----|-----VDAC------|
+  R  |-------| CSC  |----| Scalers    |   | Encp ----------|----|----HDMI-TX----|
+  A  | osd1  |      |    | Blenders   |   | Encl ----------|----|---------------|
+  M  |-------|______|----|____________|   |________________|    |               |
+  ___|__________________________________________________________|_______________|
+
+
+  VIU: Video Input Unit
+  ---------------------
+
+  The Video Input Unit is in charge of the pixel scanout from the DDR memory.
+  It fetches the frames addresses, stride and parameters from the "Canvas" memory.
+  This part is also in charge of the CSC (Colorspace Conversion).
+  It can handle 2 OSD Planes and 2 Video Planes.
+
+  VPP: Video Post Processing
+  --------------------------
+
+  The Video Post Processing is in charge of the scaling and blending of the
+  various planes into a single pixel stream.
+  There is a special "pre-blending" used by the video planes with a dedicated
+  scaler and a "post-blending" to merge with the OSD Planes.
+  The OSD planes also have a dedicated scaler for one of the OSD.
+
+  VENC: Video Encoders
+  --------------------
+
+  The VENC is composed of the multiple pixel encoders
+   - ENCI : Interlace Video encoder for CVBS and Interlace HDMI
+   - ENCP : Progressive Video Encoder for HDMI
+   - ENCL : LCD LVDS Encoder
+  The VENC Unit gets a Pixel Clocks (VCLK) from a dedicated HDMI PLL and clock
+  tree and provides the scanout clock to the VPP and VIU.
+  The ENCI is connected to a single VDAC for Composite Output.
+  The ENCI and ENCP are connected to an on-chip HDMI Transceiver.
+
+properties:
+  compatible:
+    oneOf:
+      - items:
+          - enum:
+              - amlogic,meson-gxbb-vpu # GXBB (S905)
+              - amlogic,meson-gxl-vpu # GXL (S905X, S905D)
+              - amlogic,meson-gxm-vpu # GXM (S912)
+          - const: amlogic,meson-gx-vpu
+      - enum:
+          - amlogic,meson-g12a-vpu # G12A (S905X2, S905Y2, S905D2)
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+   items:
+     - const: vpu
+     - const: hhi
+
+  interrupts:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+    description: phandle to the associated power domain
+
+  port@0:
+    type: object
+    description:
+      A port node pointing to the CVBS VDAC port node.
+
+  port@1:
+    type: object
+    description:
+      A port node pointing to the HDMI-TX port node.
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 0
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - port@0
+  - port@1
+  - "#address-cells"
+  - "#size-cells"
+
+examples:
+  - |
+    vpu: vpu@d0100000 {
+        compatible = "amlogic,meson-gxbb-vpu", "amlogic,meson-gx-vpu";
+        reg = <0xd0100000 0x100000>, <0xc883c000 0x1000>;
+        reg-names = "vpu", "hhi";
+        interrupts = <3>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        /* CVBS VDAC output port */
+        port@0 {
+            reg = <0>;
+
+            cvbs_vdac_out: endpoint {
+                remote-endpoint = <&tv_connector_in>;
+            };
+        };
+
+        /* HDMI TX output port */
+        port@1 {
+            reg = <1>;
+
+            hdmi_tx_out: endpoint {
+                remote-endpoint = <&hdmi_tx_in>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt b/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
index 508aee461e0d..aeb07c4bd703 100644
--- a/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
+++ b/Documentation/devicetree/bindings/display/connector/hdmi-connector.txt
@@ -9,6 +9,7 @@ Optional properties:
 - label: a symbolic name for the connector
 - hpd-gpios: HPD GPIO number
 - ddc-i2c-bus: phandle link to the I2C controller used for DDC EDID probing
+- ddc-en-gpios: signal to enable DDC bus
 
 Required nodes:
 - Video port for HDMI input
diff --git a/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml
new file mode 100644
index 000000000000..aa788eaa2f71
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/nec,nl8048hl11.yaml
@@ -0,0 +1,62 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/nec,nl8048hl11.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NEC NL8048HL11 4.1" WVGA TFT LCD panel
+
+description:
+  The NEC NL8048HL11 is a 4.1" WVGA TFT LCD panel with a 24-bit RGB parallel
+  data interface and an SPI control interface.
+
+maintainers:
+  - Laurent Pinchart <laurent.pinchart@ideasonboard.com>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    const: nec,nl8048hl11
+
+  label: true
+  port: true
+  reg: true
+  reset-gpios: true
+
+  spi-max-frequency:
+    maximum: 10000000
+
+required:
+  - compatible
+  - reg
+  - reset-gpios
+  - port
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    spi0 {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      lcd_panel: panel@0 {
+        compatible = "nec,nl8048hl11";
+        reg = <0>;
+        spi-max-frequency = <10000000>;
+
+        reset-gpios = <&gpio7 7 GPIO_ACTIVE_LOW>;
+
+        port {
+          lcd_in: endpoint {
+            remote-endpoint = <&dpi_out>;
+          };
+        };
+      };
+    };
+
+...
diff --git a/Documentation/devicetree/bindings/display/panel/ti,nspire.yaml b/Documentation/devicetree/bindings/display/panel/ti,nspire.yaml
new file mode 100644
index 000000000000..5c5a3b519e31
--- /dev/null
+++ b/Documentation/devicetree/bindings/display/panel/ti,nspire.yaml
@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/panel/ti,nspire.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Texas Instruments NSPIRE Display Panels
+
+maintainers:
+  - Linus Walleij <linus.walleij@linaro.org>
+
+allOf:
+  - $ref: panel-common.yaml#
+
+properties:
+  compatible:
+    enum:
+      - ti,nspire-cx-lcd-panel
+      - ti,nspire-classic-lcd-panel
+  port: true
+
+required:
+  - compatible
+
+additionalProperties: false
+
+examples:
+  - |
+    panel {
+        compatible = "ti,nspire-cx-lcd-panel";
+        port {
+            panel_in: endpoint {
+                remote-endpoint = <&pads>;
+            };
+        };
+    };
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 6992bbbbffab..29dcc6f8a64a 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -511,6 +511,8 @@ patternProperties:
     description: Lenovo Group Ltd.
   "^lg,.*":
     description: LG Corporation
+  "^lgphilips,.*":
+    description: LG Display
   "^libretech,.*":
     description: Shenzhen Libre Technology Co., Ltd
   "^licheepi,.*":
@@ -933,6 +935,9 @@ patternProperties:
     description: Tecon Microprocessor Technologies, LLC.
   "^topeet,.*":
     description: Topeet
+  "^toppoly,.*":
+    description: TPO (deprecated, use tpo)
+    deprecated: true
   "^toradex,.*":
     description: Toradex AG
   "^toshiba,.*":