Merge branch 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
 "The irq departement provides the usual mixed bag:

  Core:

   - Further improvements to the irq timings code which aims to predict
     the next interrupt for power state selection to achieve better
     latency/power balance

   - Add interrupt statistics to the core NMI handlers

   - The usual small fixes and cleanups

  Drivers:

   - Support for Renesas RZ/A1, Annapurna Labs FIC, Meson-G12A SoC and
     Amazon Gravition AMR/GIC interrupt controllers.

   - Rework of the Renesas INTC controller driver

   - ACPI support for Socionext SoCs

   - Enhancements to the CSKY interrupt controller

   - The usual small fixes and cleanups"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  irq/irqdomain: Fix comment typo
  genirq: Update irq stats from NMI handlers
  irqchip/gic-pm: Remove PM_CLK dependency
  irqchip/al-fic: Introduce Amazon's Annapurna Labs Fabric Interrupt Controller Driver
  dt-bindings: interrupt-controller: Add Amazon's Annapurna Labs FIC
  softirq: Use __this_cpu_write() in takeover_tasklets()
  irqchip/mbigen: Stop printing kernel addresses
  irqchip/gic: Add dependency for ARM_GIC_MAX_NR
  genirq/affinity: Remove unused argument from [__]irq_build_affinity_masks()
  genirq/timings: Add selftest for next event computation
  genirq/timings: Add selftest for irqs circular buffer
  genirq/timings: Add selftest for circular array
  genirq/timings: Encapsulate storing function
  genirq/timings: Encapsulate timings push
  genirq/timings: Optimize the period detection speed
  genirq/timings: Fix timings buffer inspection
  genirq/timings: Fix next event index function
  irqchip/qcom: Use struct_size() in devm_kzalloc()
  irqchip/irq-csky-mpintc: Remove unnecessary loop in interrupt handler
  dt-bindings: interrupt-controller: Update csky mpintc
  ...

4 files changed, 89 insertions, 4 deletions

diff --git a/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
new file mode 100644
index 000000000000..4e82fd575cec
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/amazon,al-fic.txt
@@ -0,0 +1,29 @@
+Amazon's Annapurna Labs Fabric Interrupt Controller
+
+Required properties:
+
+- compatible: should be "amazon,al-fic"
+- reg: physical base address and size of the registers
+- interrupt-controller: identifies the node as an interrupt controller
+- #interrupt-cells: must be 2.
+  First cell defines the index of the interrupt within the controller.
+  Second cell is used to specify the trigger type and must be one of the
+  following:
+    - bits[3:0] trigger type and level flags
+	1 = low-to-high edge triggered
+	4 = active high level-sensitive
+- interrupt-parent: specifies the parent interrupt controller.
+- interrupts: describes which input line in the interrupt parent, this
+  fic's output is connected to. This field property depends on the parent's
+  binding
+
+Example:
+
+amazon_fic: interrupt-controller@0xfd8a8500 {
+	compatible = "amazon,al-fic";
+	interrupt-controller;
+	#interrupt-cells = <2>;
+	reg = <0x0 0xfd8a8500 0x0 0x1000>;
+	interrupt-parent = <&gic>;
+	interrupts = <GIC_SPI 0x0 IRQ_TYPE_LEVEL_HIGH>;
+};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
index 1502a51548bb..7d531d5fff29 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/amlogic,meson-gpio-intc.txt
@@ -15,6 +15,7 @@ Required properties:
     "amlogic,meson-gxbb-gpio-intc" for GXBB SoCs (S905) or
     "amlogic,meson-gxl-gpio-intc" for GXL SoCs (S905X, S912)
     "amlogic,meson-axg-gpio-intc" for AXG SoCs (A113D, A113X)
+    "amlogic,meson-g12a-gpio-intc" for G12A SoCs (S905D2, S905X2, S905Y2)
 - reg : Specifies base physical address and size of the registers.
 - interrupt-controller : Identifies the node as an interrupt controller.
 - #interrupt-cells : Specifies the number of cells needed to encode an
diff --git a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
index ab921f1698fb..e13405355166 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/csky,mpintc.txt
@@ -6,11 +6,16 @@ C-SKY Multi-processors Interrupt Controller is designed for ck807/ck810/ck860
 SMP soc, and it also could be used in non-SMP system.
 
 Interrupt number definition:
-
   0-15  : software irq, and we use 15 as our IPI_IRQ.
  16-31  : private  irq, and we use 16 as the co-processor timer.
  31-1024: common irq for soc ip.
 
+Interrupt triger mode: (Defined in dt-bindings/interrupt-controller/irq.h)
+ IRQ_TYPE_LEVEL_HIGH (default)
+ IRQ_TYPE_LEVEL_LOW
+ IRQ_TYPE_EDGE_RISING
+ IRQ_TYPE_EDGE_FALLING
+
 =============================
 intc node bindings definition
 =============================
@@ -26,15 +31,22 @@ intc node bindings definition
 	- #interrupt-cells
 		Usage: required
 		Value type: <u32>
-		Definition: must be <1>
+		Definition: <2>
 	- interrupt-controller:
 		Usage: required
 
-Examples:
+Examples: ("interrupts = <irq_num IRQ_TYPE_XXX>")
 ---------
+#include <dt-bindings/interrupt-controller/irq.h>
 
 	intc: interrupt-controller {
 		compatible = "csky,mpintc";
-		#interrupt-cells = <1>;
+		#interrupt-cells = <2>;
 		interrupt-controller;
 	};
+
+	device: device-example {
+		...
+		interrupts = <34 IRQ_TYPE_EDGE_RISING>;
+		interrupt-parent = <&intc>;
+	};
diff --git a/Documentation/devicetree/bindings/interrupt-controller/renesas,rza1-irqc.txt b/Documentation/devicetree/bindings/interrupt-controller/renesas,rza1-irqc.txt
new file mode 100644
index 000000000000..727b7e4cd6e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/interrupt-controller/renesas,rza1-irqc.txt
@@ -0,0 +1,43 @@
+DT bindings for the Renesas RZ/A1 Interrupt Controller
+
+The RZ/A1 Interrupt Controller is a front-end for the GIC found on Renesas
+RZ/A1 and RZ/A2 SoCs:
+  - IRQ sense select for 8 external interrupts, 1:1-mapped to 8 GIC SPI
+    interrupts,
+  - NMI edge select.
+
+Required properties:
+  - compatible: Must be "renesas,<soctype>-irqc", and "renesas,rza1-irqc" as
+		fallback.
+		Examples with soctypes are:
+		  - "renesas,r7s72100-irqc" (RZ/A1H)
+		  - "renesas,r7s9210-irqc" (RZ/A2M)
+  - #interrupt-cells: Must be 2 (an interrupt index and flags, as defined
+				 in interrupts.txt in this directory)
+  - #address-cells: Must be zero
+  - interrupt-controller: Marks the device as an interrupt controller
+  - reg: Base address and length of the memory resource used by the interrupt
+         controller
+  - interrupt-map: Specifies the mapping from external interrupts to GIC
+		   interrupts
+  - interrupt-map-mask: Must be <7 0>
+
+Example:
+
+	irqc: interrupt-controller@fcfef800 {
+		compatible = "renesas,r7s72100-irqc", "renesas,rza1-irqc";
+		#interrupt-cells = <2>;
+		#address-cells = <0>;
+		interrupt-controller;
+		reg = <0xfcfef800 0x6>;
+		interrupt-map =
+			<0 0 &gic GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
+			<1 0 &gic GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>,
+			<2 0 &gic GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
+			<3 0 &gic GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>,
+			<4 0 &gic GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
+			<5 0 &gic GIC_SPI 5 IRQ_TYPE_LEVEL_HIGH>,
+			<6 0 &gic GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>,
+			<7 0 &gic GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>;
+		interrupt-map-mask = <7 0>;
+	};