Merge tag 'omap-for-v4.8/dt-part1-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into next/dt

Device tree changes for omaps for v4.8 merge window:

- PWM binding updates and related dts changes
- OCM RAM updates for dra7
- Enable n900 lirc-rx51 driver
- omap3-gta04 updates for backlight, bma180, itg3200, hmc5843 and wifi
- am335x, am437x and am57xx operating point updates and additions
- am335x-icev2 pca9536 node
- dra72-evm regulator updates
- edma spelling fixes
- am335x and am437x ethernet phy update
- a series of mcbsp updates
- omap3-gta04 eeprom
- dra7 PCIe unit address fix
- stdout-path for beaglebone variants
- crypto accelerator nodes for am335x, am437x and dra7

* tag 'omap-for-v4.8/dt-part1-signed-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (42 commits)
  ARM: dts: AM43xx: Add node for RNG
  ARM: dts: AM43xx: clk: Add RNG clk node
  ARM: dts: DRA7: Add DT node for RNG IP
  ARM: dts: DRA7: Add support for SHA IP
  ARM: dts: DRA7: Add DT nodes for AES IP
  ARM: dts: DRA7: Add DT node for DES IP
  ARM: dts: am335x-bone-common: use stdout-path in Beaglebone boards.
  ARM: dts: DRA7: fix unit address of second PCIe instance
  ARM: dts: omap3-gta04: Add RFID eeprom node
  ARM: dts: omap4-duovero: Add pdmclk binding for audio
  ARM: dts: omap4-var-som-om44: Add pdmclk binding for audio
  ARM: dts: omap4-sdp: Add pdmclk binding for audio
  ARM: dts: omap4-panda-common: Add pdmclk binding for audio
  ARM: dts: omap5-board-common: Add pdmclk binding for audio
  ARM: dts: omap3: Add clocks to McBSP nodes
  ARM: dts: am335x-bone-common: Mark MAC as having only one PHY
  ARM: dts: am437x-idk-evm: Mark MAC as having only one PHY
  ARM: dts: Correct misspelling, "emda3" -> "edma3"
  ARM: dts: dra72-evm: Rename 3.3V regulator tag
  ARM: dts: am335x-icev2: Add DT node for TI PCA9536
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

4 files changed, 91 insertions, 22 deletions

diff --git a/Documentation/devicetree/bindings/dma/ti-edma.txt b/Documentation/devicetree/bindings/dma/ti-edma.txt
index 079b42a81d7c..18090e7226b4 100644
--- a/Documentation/devicetree/bindings/dma/ti-edma.txt
+++ b/Documentation/devicetree/bindings/dma/ti-edma.txt
@@ -15,7 +15,7 @@ Required properties:
 - reg:		Memory map of eDMA CC
 - reg-names:	"edma3_cc"
 - interrupts:	Interrupt lines for CCINT, MPERR and CCERRINT.
-- interrupt-names: "edma3_ccint", "emda3_mperr" and "edma3_ccerrint"
+- interrupt-names: "edma3_ccint", "edma3_mperr" and "edma3_ccerrint"
 - ti,tptcs:	List of TPTCs associated with the eDMA in the following form:
 		<&tptc_phandle TC_priority_number>. The highest priority is 0.
 
@@ -48,7 +48,7 @@ edma: edma@49000000 {
 	reg =	<0x49000000 0x10000>;
 	reg-names = "edma3_cc";
 	interrupts = <12 13 14>;
-	interrupt-names = "edma3_ccint", "emda3_mperr", "edma3_ccerrint";
+	interrupt-names = "edma3_ccint", "edma3_mperr", "edma3_ccerrint";
 	dma-requests = <64>;
 	#dma-cells = <2>;
 
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
index fb81179dce37..8007e839a716 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiecap.txt
@@ -2,28 +2,48 @@ TI SOC ECAP based APWM controller
 
 Required properties:
 - compatible: Must be "ti,<soc>-ecap".
-  for am33xx - compatible = "ti,am33xx-ecap";
-  for da850  - compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+  for am33xx - compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
+  for am4372 - compatible = "ti,am4372-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
+  for da850  - compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
+  for dra746 - compatible = "ti,dra746-ecap", "ti,am3352-ecap";
 - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
   the cells format. The PWM channel index ranges from 0 to 4. The only third
   cell flag supported by this binding is PWM_POLARITY_INVERTED.
 - reg: physical base address and size of the registers map.
 
 Optional properties:
-- ti,hwmods: Name of the hwmod associated to the ECAP:
-  "ecap<x>", <x> being the 0-based instance number from the HW spec
+- clocks: Handle to the ECAP's functional clock.
+- clock-names: Must be set to "fck".
 
 Example:
 
-ecap0: ecap@0 { /* ECAP on am33xx */
-	compatible = "ti,am33xx-ecap";
+ecap0: ecap@48300100 { /* ECAP on am33xx */
+	compatible = "ti,am3352-ecap", "ti,am33xx-ecap";
+	#pwm-cells = <3>;
+	reg = <0x48300100 0x80>;
+	clocks = <&l4ls_gclk>;
+	clock-names = "fck";
+};
+
+ecap0: ecap@48300100 { /* ECAP on am4372 */
+	compatible = "ti,am4372-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
 	#pwm-cells = <3>;
 	reg = <0x48300100 0x80>;
 	ti,hwmods = "ecap0";
+	clocks = <&l4ls_gclk>;
+	clock-names = "fck";
+};
+
+ecap0: ecap@1f06000 { /* ECAP on da850 */
+	compatible = "ti,da850-ecap", "ti,am3352-ecap", "ti,am33xx-ecap";
+	#pwm-cells = <3>;
+	reg = <0x1f06000 0x80>;
 };
 
-ecap0: ecap@0 { /* ECAP on da850 */
-	compatible = "ti,da850-ecap", "ti,am33xx-ecap";
+ecap0: ecap@4843e100 {
+	compatible = "ti,dra746-ecap", "ti,am3352-ecap";
 	#pwm-cells = <3>;
-	reg = <0x306000 0x80>;
+	reg = <0x4843e100 0x80>;
+	clocks = <&l4_root_clk_div>;
+	clock-names = "fck";
 };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
index 9c100b2c5b23..944fe356bb45 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tiehrpwm.txt
@@ -2,28 +2,48 @@ TI SOC EHRPWM based PWM controller
 
 Required properties:
 - compatible: Must be "ti,<soc>-ehrpwm".
-  for am33xx - compatible = "ti,am33xx-ehrpwm";
-  for da850  - compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+  for am33xx  - compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
+  for am4372  - compatible = "ti,am4372-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm";
+  for da850   - compatible = "ti,da850-ehrpwm", "ti-am3352-ehrpwm", "ti,am33xx-ehrpwm";
+  for dra746 - compatible = "ti,dra746-ehrpwm", "ti-am3352-ehrpwm";
 - #pwm-cells: should be 3. See pwm.txt in this directory for a description of
   the cells format. The only third cell flag supported by this binding is
   PWM_POLARITY_INVERTED.
 - reg: physical base address and size of the registers map.
 
 Optional properties:
-- ti,hwmods: Name of the hwmod associated to the EHRPWM:
-  "ehrpwm<x>", <x> being the 0-based instance number from the HW spec
+- clocks: Handle to the PWM's time-base and functional clock.
+- clock-names: Must be set to "tbclk" and "fck".
 
 Example:
 
-ehrpwm0: ehrpwm@0 { /* EHRPWM on am33xx */
-	compatible = "ti,am33xx-ehrpwm";
+ehrpwm0: pwm@48300200 { /* EHRPWM on am33xx */
+	compatible = "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
 	#pwm-cells = <3>;
 	reg = <0x48300200 0x100>;
+	clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+	clock-names = "tbclk", "fck";
+};
+
+ehrpwm0: pwm@48300200 { /* EHRPWM on am4372 */
+	compatible = "ti,am4372-ehrpwm", "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
+	#pwm-cells = <3>;
+	reg = <0x48300200 0x80>;
+	clocks = <&ehrpwm0_tbclk>, <&l4ls_gclk>;
+	clock-names = "tbclk", "fck";
 	ti,hwmods = "ehrpwm0";
 };
 
-ehrpwm0: ehrpwm@0 { /* EHRPWM on da850 */
-	compatible = "ti,da850-ehrpwm", "ti,am33xx-ehrpwm";
+ehrpwm0: pwm@1f00000 { /* EHRPWM on da850 */
+	compatible = "ti,da850-ehrpwm", "ti,am3352-ehrpwm", "ti,am33xx-ehrpwm";
+	#pwm-cells = <3>;
+	reg = <0x1f00000 0x2000>;
+};
+
+ehrpwm0: pwm@4843e200 { /* EHRPWM on dra746 */
+	compatible = "ti,dra746-ehrpwm", "ti,am3352-ehrpwm";
 	#pwm-cells = <3>;
-	reg = <0x300000 0x2000>;
+	reg = <0x4843e200 0x80>;
+	clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
+	clock-names = "tbclk", "fck";
 };
diff --git a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
index f7eae77f8354..1a5d7b71db89 100644
--- a/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
+++ b/Documentation/devicetree/bindings/pwm/pwm-tipwmss.txt
@@ -1,7 +1,11 @@
 TI SOC based PWM Subsystem
 
 Required properties:
-- compatible: Must be "ti,am33xx-pwmss";
+- compatible: Must be "ti,<soc>-pwmss".
+  for am33xx  - compatible = "ti,am33xx-pwmss";
+  for am4372  - compatible = "ti,am4372-pwmss","ti,am33xx-pwmss";
+  for dra746 - compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss"
+
 - reg: physical base address and size of the registers map.
 - address-cells: Specify the number of u32 entries needed in child nodes.
 		  Should set to 1.
@@ -16,7 +20,7 @@ Required properties:
 Also child nodes should also populated under PWMSS DT node.
 
 Example:
-pwmss0: pwmss@48300000 {
+epwmss0: epwmss@48300000 { /* PWMSS for am33xx */
 	compatible = "ti,am33xx-pwmss";
 	reg = <0x48300000 0x10>;
 	ti,hwmods = "epwmss0";
@@ -29,3 +33,28 @@ pwmss0: pwmss@48300000 {
 
 	/* child nodes go here */
 };
+
+epwmss0: epwmss@48300000 { /* PWMSS for am4372 */
+	compatible = "ti,am4372-pwmss","ti,am33xx-pwmss"
+	reg = <0x48300000 0x10>;
+	ti,hwmods = "epwmss0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	status = "disabled";
+	ranges = <0x48300100 0x48300100 0x80   /* ECAP */
+		  0x48300180 0x48300180 0x80   /* EQEP */
+		  0x48300200 0x48300200 0x80>; /* EHRPWM */
+
+	/* child nodes go here */
+};
+
+epwmss0: epwmss@4843e000 { /* PWMSS for DRA7xx */
+	compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
+	reg = <0x4843e000 0x30>;
+	ti,hwmods = "epwmss0";
+	#address-cells = <1>;
+	#size-cells = <1>;
+	ranges;
+
+	/* child nodes go here */
+};