Merge drm-fixes into drm-next.

Nouveau wanted this to avoid some worse conflicts when I merge that.

11 files changed, 52 insertions, 19 deletions

diff --git a/Documentation/devicetree/bindings/arm/omap/omap.txt b/Documentation/devicetree/bindings/arm/omap/omap.txt
index a2bd593881ca..66422d663184 100644
--- a/Documentation/devicetree/bindings/arm/omap/omap.txt
+++ b/Documentation/devicetree/bindings/arm/omap/omap.txt
@@ -23,6 +23,7 @@ Optional properties:
   during suspend.
 - ti,no-reset-on-init: When present, the module should not be reset at init
 - ti,no-idle-on-init: When present, the module should not be idled at init
+- ti,no-idle: When present, the module is never allowed to idle.
 
 Example:
 
diff --git a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
index ace05992a262..20df350b9ef3 100644
--- a/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
+++ b/Documentation/devicetree/bindings/clock/rockchip,rk3036-cru.txt
@@ -30,7 +30,7 @@ that they are defined using standard clock bindings with following
 clock-output-names:
  - "xin24m" - crystal input - required,
  - "ext_i2s" - external I2S clock - optional,
- - "ext_gmac" - external GMAC clock - optional
+ - "rmii_clkin" - external EMAC clock - optional
 
 Example: Clock controller node:
 
diff --git a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
index 7803e77d85cb..007a5b46256a 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/arm,gic-v3.txt
@@ -24,9 +24,8 @@ Main node required properties:
 		1 = edge triggered
 		4 = level triggered
 
-  Cells 4 and beyond are reserved for future use. When the 1st cell
-  has a value of 0 or 1, cells 4 and beyond act as padding, and may be
-  ignored. It is recommended that padding cells have a value of 0.
+  Cells 4 and beyond are reserved for future use and must have a value
+  of 0 if present.
 
 - reg : Specifies base physical address(s) and size of the GIC
   registers, in the following order:
diff --git a/Documentation/devicetree/bindings/net/renesas,ravb.txt b/Documentation/devicetree/bindings/net/renesas,ravb.txt
index 81a9f9e6b45f..c8ac222eac67 100644
--- a/Documentation/devicetree/bindings/net/renesas,ravb.txt
+++ b/Documentation/devicetree/bindings/net/renesas,ravb.txt
@@ -82,8 +82,8 @@ Example:
 				  "ch16", "ch17", "ch18", "ch19",
 				  "ch20", "ch21", "ch22", "ch23",
 				  "ch24";
-		clocks = <&mstp8_clks R8A7795_CLK_ETHERAVB>;
-		power-domains = <&cpg_clocks>;
+		clocks = <&cpg CPG_MOD 812>;
+		power-domains = <&cpg>;
 		phy-mode = "rgmii-id";
 		phy-handle = <&phy0>;
 
diff --git a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
index 4e8b90e43dd8..07a75094c5a8 100644
--- a/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
+++ b/Documentation/devicetree/bindings/pci/pci-rcar-gen2.txt
@@ -8,6 +8,7 @@ OHCI and EHCI controllers.
 Required properties:
 - compatible: "renesas,pci-r8a7790" for the R8A7790 SoC;
 	      "renesas,pci-r8a7791" for the R8A7791 SoC;
+	      "renesas,pci-r8a7793" for the R8A7793 SoC;
 	      "renesas,pci-r8a7794" for the R8A7794 SoC;
 	      "renesas,pci-rcar-gen2" for a generic R-Car Gen2 compatible device
 
diff --git a/Documentation/devicetree/bindings/pci/rcar-pci.txt b/Documentation/devicetree/bindings/pci/rcar-pci.txt
index 558fe528ae19..6cf99690eef9 100644
--- a/Documentation/devicetree/bindings/pci/rcar-pci.txt
+++ b/Documentation/devicetree/bindings/pci/rcar-pci.txt
@@ -4,6 +4,7 @@ Required properties:
 compatible: "renesas,pcie-r8a7779" for the R8A7779 SoC;
 	    "renesas,pcie-r8a7790" for the R8A7790 SoC;
 	    "renesas,pcie-r8a7791" for the R8A7791 SoC;
+	    "renesas,pcie-r8a7793" for the R8A7793 SoC;
 	    "renesas,pcie-r8a7795" for the R8A7795 SoC;
 	    "renesas,pcie-rcar-gen2" for a generic R-Car Gen2 compatible device.
 
diff --git a/Documentation/devicetree/bindings/regulator/tps65217.txt b/Documentation/devicetree/bindings/regulator/tps65217.txt
index d18109657da6..4f05d208c95c 100644
--- a/Documentation/devicetree/bindings/regulator/tps65217.txt
+++ b/Documentation/devicetree/bindings/regulator/tps65217.txt
@@ -26,11 +26,7 @@ Example:
 		ti,pmic-shutdown-controller;
 
 		regulators {
-			#address-cells = <1>;
-			#size-cells = <0>;
-
 			dcdc1_reg: dcdc1 {
-				reg = <0>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1800000>;
 				regulator-boot-on;
@@ -38,7 +34,6 @@ Example:
 			};
 
 			dcdc2_reg: dcdc2 {
-				reg = <1>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -46,7 +41,6 @@ Example:
 			};
 
 			dcdc3_reg: dcc3 {
-				reg = <2>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <1500000>;
 				regulator-boot-on;
@@ -54,7 +48,6 @@ Example:
 			};
 
 			ldo1_reg: ldo1 {
-				reg = <3>;
 				regulator-min-microvolt = <1000000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -62,7 +55,6 @@ Example:
 			};
 
 			ldo2_reg: ldo2 {
-				reg = <4>;
 				regulator-min-microvolt = <900000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -70,7 +62,6 @@ Example:
 			};
 
 			ldo3_reg: ldo3 {
-				reg = <5>;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
@@ -78,7 +69,6 @@ Example:
 			};
 
 			ldo4_reg: ldo4 {
-				reg = <6>;
 				regulator-min-microvolt = <1800000>;
 				regulator-max-microvolt = <3300000>;
 				regulator-boot-on;
diff --git a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
index ac2fcd6ff4b8..1068ffce9f91 100644
--- a/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
+++ b/Documentation/devicetree/bindings/rtc/s3c-rtc.txt
@@ -14,6 +14,10 @@ Required properties:
   interrupt number is the rtc alarm interrupt and second interrupt number
   is the rtc tick interrupt. The number of cells representing a interrupt
   depends on the parent interrupt controller.
+- clocks: Must contain a list of phandle and clock specifier for the rtc
+          and source clocks.
+- clock-names: Must contain "rtc" and "rtc_src" entries sorted in the
+               same order as the clocks property.
 
 Example:
 
@@ -21,4 +25,6 @@ Example:
 		compatible = "samsung,s3c6410-rtc";
 		reg = <0x10070000 0x100>;
 		interrupts = <44 0 45 0>;
+		clocks = <&clock CLK_RTC>, <&s2mps11_osc S2MPS11_CLK_AP>;
+		clock-names = "rtc", "rtc_src";
 	};
diff --git a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
index 35ae1fb3537f..ed94c217c98d 100644
--- a/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
+++ b/Documentation/devicetree/bindings/serial/fsl-imx-uart.txt
@@ -9,7 +9,7 @@ Optional properties:
 - fsl,uart-has-rtscts : Indicate the uart has rts and cts
 - fsl,irda-mode : Indicate the uart supports irda mode
 - fsl,dte-mode : Indicate the uart works in DTE mode. The uart works
-                  is DCE mode by default.
+                  in DCE mode by default.
 
 Note: Each uart controller should have an alias correctly numbered
 in "aliases" node.
diff --git a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
index ce55c0a6f757..4da41bf1888e 100644
--- a/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
+++ b/Documentation/devicetree/bindings/sound/fsl-asoc-card.txt
@@ -30,6 +30,8 @@ The compatible list for this generic sound card currently:
  "fsl,imx-audio-sgtl5000"
  (compatible with Documentation/devicetree/bindings/sound/imx-audio-sgtl5000.txt)
 
+ "fsl,imx-audio-wm8960"
+
 Required properties:
 
   - compatible		: Contains one of entries in the compatible list.
diff --git a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
index 332e625f6ed0..e5ee3f159893 100644
--- a/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/rcar-thermal.txt
@@ -1,8 +1,9 @@
 * Renesas R-Car Thermal
 
 Required properties:
-- compatible		: "renesas,thermal-<soctype>", "renesas,rcar-thermal"
-			  as fallback.
+- compatible		: "renesas,thermal-<soctype>",
+			   "renesas,rcar-gen2-thermal" (with thermal-zone) or
+			   "renesas,rcar-thermal" (without thermal-zone) as fallback.
 			  Examples with soctypes are:
 			    - "renesas,thermal-r8a73a4" (R-Mobile APE6)
 			    - "renesas,thermal-r8a7779" (R-Car H1)
@@ -36,3 +37,35 @@ thermal@e61f0000 {
 		0xe61f0300 0x38>;
 	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
 };
+
+Example (with thermal-zone):
+
+thermal-zones {
+	cpu_thermal: cpu-thermal {
+		polling-delay-passive	= <1000>;
+		polling-delay		= <5000>;
+
+		thermal-sensors = <&thermal>;
+
+		trips {
+			cpu-crit {
+				temperature	= <115000>;
+				hysteresis	= <0>;
+				type		= "critical";
+			};
+		};
+		cooling-maps {
+		};
+	};
+};
+
+thermal: thermal@e61f0000 {
+	compatible =	"renesas,thermal-r8a7790",
+			"renesas,rcar-gen2-thermal",
+			"renesas,rcar-thermal";
+	reg = <0 0xe61f0000 0 0x14>, <0 0xe61f0100 0 0x38>;
+	interrupts = <0 69 IRQ_TYPE_LEVEL_HIGH>;
+	clocks = <&mstp5_clks R8A7790_CLK_THERMAL>;
+	power-domains = <&cpg_clocks>;
+	#thermal-sensor-cells = <0>;
+};