Merge tag 'imx-dt-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

i.MX device tree update for 4.19:
 - Add device tree support for i.MX6SLL SoC.
 - New board support: ConnectCore 6UL System-On-Module and SBC Express;
   ZII SCU2 Mezz, SCU3 ESB, SSMB SPU3 and CFU1 board; i.MX6SLL EVK
   board; Engicam i.CoreM6 1.5 Quad/Dual MIPI; LogicPD MX31Lite board;
   i.MX53 HSC/DDC boards from K+P.
 - Remove fake regulator bus container node and enable USB OTG support
   for i.MX6 wandboard and riotboard.
 - Populate RAVE SP EEPROM, backlight, power button and watchdog devices
   for ZII boards.
 - Add cooling-cells for cpufreq cooling device, and add OPP properties
   for all CPUs.
 - A series from Anson Huang to enable LCD panel and backlight support
   for imx6sll-evk board.
 - Make pfuze100 sw4 regulator always-on for for a few Freescale/NXP
   development boards, because the regulator is critical there and
   cannot be turned off.
 - Add more device support for i.MX5: AIPSTZ, SAHARA Crypto, M4IF,
   Tigerp, PMU, CodaHx4 VPU.
 - Enable PMU secure-reg-access for imx51-babbage, imx51-zii-rdu1 and
   imx53-ppd board.
 - Switch more device tree license to use SPDX identifier.
 - Switch to use OF graph to describe the display for imx7d-nitrogen7.
 - Add chosen/stdout-path for more boards, so that earlycon can be
   enabled more easily on kernel cmdline.
 - Convert GPC to new device tree bindings and add Vivante gpu nodes
   for i.MX6SL SoC.
 - Add more device support for imx6dl-mamoj board: parallel display,
   WiFi and USB.
 - A series from Stefan Agner to update i.MX6 apalis/colibri boards on
   various aspects: SD/MMC card detection, regulators, etc.

* tag 'imx-dt-4.19' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (96 commits)
  ARM: dts: imx7d: remove "operating-points" property for cpu1
  ARM: dts: vf610-zii-ssmb-spu3: Fix W=1 level warnings
  ARM: dts: vf610: Add ZII CFU1 board
  ARM: dts: imx6dl-mamoj: Add usb host and device support
  ARM: dts: imx6dl-mamoj: Add Wifi support
  ARM: dts: imx6dl-mamoj: Add parallel display support
  ARM: dts: vf610: Add ZII SSMB SPU3 board
  ARM: dts: imx6ul-pico-hobbit: Do not hardcode the memory size
  ARM: dts: imx6sl-evk: make pfuze100 sw4 always on
  ARM: dts: imx6sll-evk: make pfuze100 sw4 always on
  ARM: dts: imx6sx-sdb-reva: make pfuze100 sw4 always on
  ARM: dts: imx6qdl-sabresd: make pfuze100 sw4 always on
  ARM: dts: imx6sl-evk: add missing GPIO iomux setting
  ARM: dts: imx51-zii-scu3-esb: Fix RAVE SP watchdog compatible string
  ARM: dts: imx51-zii-scu3-esb: Add switch IRQ line pinumx config
  ARM: dts: imx6sx-nitrogen6sx: remove obsolete display configuration
  ARM: dts: imx7d-nitrogen7: use OF graph to describe the display
  ARM: dts: imx: Switch Boundary Devices boards to SPDX identifier
  ARM: dts: imx6sl: Add vivante gpu nodes
  ARM: dts: imx6sll-evk: enable SEIKO 43WVF1G lcdif panel
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

3 files changed, 28 insertions, 0 deletions

diff --git a/Documentation/devicetree/bindings/arm/freescale/m4if.txt b/Documentation/devicetree/bindings/arm/freescale/m4if.txt
new file mode 100644
index 000000000000..93bd7b867a53
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/m4if.txt
@@ -0,0 +1,12 @@
+* Freescale Multi Master Multi Memory Interface (M4IF) module
+
+Required properties:
+- compatible : Should be "fsl,imx51-m4if"
+- reg : Address and length of the register set for the device
+
+Example:
+
+m4if: m4if@83fd8000 {
+	compatible = "fsl,imx51-m4if";
+	reg = <0x83fd8000 0x1000>;
+};
diff --git a/Documentation/devicetree/bindings/arm/freescale/tigerp.txt b/Documentation/devicetree/bindings/arm/freescale/tigerp.txt
new file mode 100644
index 000000000000..19e2aad63d6e
--- /dev/null
+++ b/Documentation/devicetree/bindings/arm/freescale/tigerp.txt
@@ -0,0 +1,12 @@
+* Freescale Tigerp platform module
+
+Required properties:
+- compatible : Should be "fsl,imx51-tigerp"
+- reg : Address and length of the register set for the device
+
+Example:
+
+tigerp: tigerp@83fa0000 {
+	compatible = "fsl,imx51-tigerp";
+	reg = <0x83fa0000 0x28>;
+};
diff --git a/Documentation/devicetree/bindings/arm/fsl.txt b/Documentation/devicetree/bindings/arm/fsl.txt
index cdb9dd705754..8a1baa2b9723 100644
--- a/Documentation/devicetree/bindings/arm/fsl.txt
+++ b/Documentation/devicetree/bindings/arm/fsl.txt
@@ -53,6 +53,10 @@ i.MX6 Quad SABRE Automotive Board
 Required root node properties:
     - compatible = "fsl,imx6q-sabreauto", "fsl,imx6q";
 
+i.MX6SLL EVK board
+Required root node properties:
+    - compatible = "fsl,imx6sll-evk", "fsl,imx6sll";
+
 Generic i.MX boards
 -------------------