Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc

Pull ARM SoC fixes from Olof Johansson:
 "We haven't seen a whole lot of fixes for the first two weeks since the
  merge window, but here is the batch that we have at the moment.

  Nothing sticks out as particularly bad or scary, it's mostly a handful
  of smaller fixes to several platforms. The Uniphier reset controller
  changes could probably have been delayed to 4.10, but they're not
  scary and just plumbing up driver changes that went in during the
  merge window.

  We're also adding another maintainer to Marvell Berlin platforms, to
  help out when Sebastian is too busy. Yay teamwork!"

* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: imx: mach-imx6q: Fix the PHY ID mask for AR8031
  ARM: dts: vf610: fix IRQ flag of global timer
  ARM: imx: gpc: Fix the imx_gpc_genpd_init() error path
  ARM: imx: gpc: Initialize all power domains
  arm64: dts: Updated NAND DT properties for NS2 SVK
  arm64: dts: uniphier: change MIO node to SD control node
  ARM: dts: uniphier: change MIO node to SD control node
  reset: uniphier: rename MIO reset to SD reset for Pro5, PXs2, LD20 SoCs
  arm64: uniphier: select ARCH_HAS_RESET_CONTROLLER
  ARM: uniphier: select ARCH_HAS_RESET_CONTROLLER
  arm64: dts: Add timer erratum property for LS2080A and LS1043A
  arm64: dts: rockchip: remove the abuse of keep-power-in-suspend
  ARM: multi_v7_defconfig: Enable Intel e1000e driver
  MAINTAINERS: add myself as Marvell berlin SoC maintainer
  bus: qcom-ebi2: depend on ARCH_QCOM or COMPILE_TEST
  ARM: dts: fix the SD card on the Snowball
  arm64: dts: rockchip: remove always-on and boot-on from vcc_sd
  arm64: dts: marvell: fix clocksource for CP110 master SPI0
  ARM: mvebu: Select corediv clk for all mvebu v7 SoC

1 files changed, 31 insertions, 31 deletions

diff --git a/Documentation/devicetree/bindings/reset/uniphier-reset.txt b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
index e6bbfccd56c3..5020524cddeb 100644
--- a/Documentation/devicetree/bindings/reset/uniphier-reset.txt
+++ b/Documentation/devicetree/bindings/reset/uniphier-reset.txt
@@ -6,25 +6,25 @@ System reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-reset" - for PH1-sLD3 SoC.
-    "socionext,uniphier-ld4-reset"  - for PH1-LD4 SoC.
-    "socionext,uniphier-pro4-reset" - for PH1-Pro4 SoC.
-    "socionext,uniphier-sld8-reset" - for PH1-sLD8 SoC.
-    "socionext,uniphier-pro5-reset" - for PH1-Pro5 SoC.
-    "socionext,uniphier-pxs2-reset" - for ProXstream2/PH1-LD6b SoC.
-    "socionext,uniphier-ld11-reset" - for PH1-LD11 SoC.
-    "socionext,uniphier-ld20-reset" - for PH1-LD20 SoC.
+    "socionext,uniphier-sld3-reset" - for sLD3 SoC.
+    "socionext,uniphier-ld4-reset"  - for LD4 SoC.
+    "socionext,uniphier-pro4-reset" - for Pro4 SoC.
+    "socionext,uniphier-sld8-reset" - for sLD8 SoC.
+    "socionext,uniphier-pro5-reset" - for Pro5 SoC.
+    "socionext,uniphier-pxs2-reset" - for PXs2/LD6b SoC.
+    "socionext,uniphier-ld11-reset" - for LD11 SoC.
+    "socionext,uniphier-ld20-reset" - for LD20 SoC.
 - #reset-cells: should be 1.
 
 Example:
 
 	sysctrl@61840000 {
-		compatible = "socionext,uniphier-ld20-sysctrl",
+		compatible = "socionext,uniphier-ld11-sysctrl",
 			     "simple-mfd", "syscon";
 		reg = <0x61840000 0x4000>;
 
 		reset {
-			compatible = "socionext,uniphier-ld20-reset";
+			compatible = "socionext,uniphier-ld11-reset";
 			#reset-cells = <1>;
 		};
 
@@ -32,30 +32,30 @@ Example:
 	};
 
 
-Media I/O (MIO) reset
----------------------
+Media I/O (MIO) reset, SD reset
+-------------------------------
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-sld3-mio-reset" - for PH1-sLD3 SoC.
-    "socionext,uniphier-ld4-mio-reset"  - for PH1-LD4 SoC.
-    "socionext,uniphier-pro4-mio-reset" - for PH1-Pro4 SoC.
-    "socionext,uniphier-sld8-mio-reset" - for PH1-sLD8 SoC.
-    "socionext,uniphier-pro5-mio-reset" - for PH1-Pro5 SoC.
-    "socionext,uniphier-pxs2-mio-reset" - for ProXstream2/PH1-LD6b SoC.
-    "socionext,uniphier-ld11-mio-reset" - for PH1-LD11 SoC.
-    "socionext,uniphier-ld20-mio-reset" - for PH1-LD20 SoC.
+    "socionext,uniphier-sld3-mio-reset" - for sLD3 SoC.
+    "socionext,uniphier-ld4-mio-reset"  - for LD4 SoC.
+    "socionext,uniphier-pro4-mio-reset" - for Pro4 SoC.
+    "socionext,uniphier-sld8-mio-reset" - for sLD8 SoC.
+    "socionext,uniphier-pro5-sd-reset"  - for Pro5 SoC.
+    "socionext,uniphier-pxs2-sd-reset"  - for PXs2/LD6b SoC.
+    "socionext,uniphier-ld11-mio-reset" - for LD11 SoC.
+    "socionext,uniphier-ld20-sd-reset"  - for LD20 SoC.
 - #reset-cells: should be 1.
 
 Example:
 
 	mioctrl@59810000 {
-		compatible = "socionext,uniphier-ld20-mioctrl",
+		compatible = "socionext,uniphier-ld11-mioctrl",
 			     "simple-mfd", "syscon";
 		reg = <0x59810000 0x800>;
 
 		reset {
-			compatible = "socionext,uniphier-ld20-mio-reset";
+			compatible = "socionext,uniphier-ld11-mio-reset";
 			#reset-cells = <1>;
 		};
 
@@ -68,24 +68,24 @@ Peripheral reset
 
 Required properties:
 - compatible: should be one of the following:
-    "socionext,uniphier-ld4-peri-reset"  - for PH1-LD4 SoC.
-    "socionext,uniphier-pro4-peri-reset" - for PH1-Pro4 SoC.
-    "socionext,uniphier-sld8-peri-reset" - for PH1-sLD8 SoC.
-    "socionext,uniphier-pro5-peri-reset" - for PH1-Pro5 SoC.
-    "socionext,uniphier-pxs2-peri-reset" - for ProXstream2/PH1-LD6b SoC.
-    "socionext,uniphier-ld11-peri-reset" - for PH1-LD11 SoC.
-    "socionext,uniphier-ld20-peri-reset" - for PH1-LD20 SoC.
+    "socionext,uniphier-ld4-peri-reset"  - for LD4 SoC.
+    "socionext,uniphier-pro4-peri-reset" - for Pro4 SoC.
+    "socionext,uniphier-sld8-peri-reset" - for sLD8 SoC.
+    "socionext,uniphier-pro5-peri-reset" - for Pro5 SoC.
+    "socionext,uniphier-pxs2-peri-reset" - for PXs2/LD6b SoC.
+    "socionext,uniphier-ld11-peri-reset" - for LD11 SoC.
+    "socionext,uniphier-ld20-peri-reset" - for LD20 SoC.
 - #reset-cells: should be 1.
 
 Example:
 
 	perictrl@59820000 {
-		compatible = "socionext,uniphier-ld20-perictrl",
+		compatible = "socionext,uniphier-ld11-perictrl",
 			     "simple-mfd", "syscon";
 		reg = <0x59820000 0x200>;
 
 		reset {
-			compatible = "socionext,uniphier-ld20-peri-reset";
+			compatible = "socionext,uniphier-ld11-peri-reset";
 			#reset-cells = <1>;
 		};