Merge branch 'msm-next' of git://people.freedesktop.org/~robclark/linux into drm-next

The big things this time around are:
1) support for hw cursor on newer mdp5 devices (snapdragon 820+,
tested on db820c)
2) dsi encoder cleanup
3) gpu dt bindings cleanup so we can get the gpu nodes merged upstream

* 'msm-next' of git://people.freedesktop.org/~robclark/linux: (32 commits)
  drm/msm: return -EFAULT if copy_from_user() fails
  drm/msm/dsi: Add PHY/PLL for 8x96
  drm/msm/dsi: Add new method to calculate 14nm PHY timings
  drm/msm/dsi: Move PHY operations out of host
  drm/msm/dsi: Reset both PHYs before clock operation for dual DSI
  drm/msm/dsi: Pass down use case to PHY
  drm/msm/dsi: Return more timings from PHY to host
  drm/msm/dsi: Add a PHY op that initializes version specific stuff
  drm/msm/dsi: Add 8x96 info in dsi_cfg
  drm/msm/dsi: Don't error if a DSI host doesn't have a device connected
  drm/msm/mdp5: Add support for legacy cursor updates
  drm/msm/mdp5: Refactor mdp5_plane_atomic_check
  drm/msm/mdp5: Add cursor planes
  drm/msm/mdp5: Misc cursor plane bits
  drm/msm/mdp5: Configure COLOR3_OUT propagation
  drm/msm/mdp5: Use plane helpers to configure src/dst rectangles
  drm/msm/mdp5: Prepare CRTC/LM for empty stages
  drm/msm/mdp5: Create only as many CRTCs as we need
  drm/msm/mdp5: cfg: Change count to unsigned int
  drm/msm/mdp5: Create single encoder per interface (INTF)
  ...

1 files changed, 12 insertions, 26 deletions

diff --git a/Documentation/devicetree/bindings/display/msm/gpu.txt b/Documentation/devicetree/bindings/display/msm/gpu.txt
index 67d0a58dbb77..43fac0fe09bb 100644
--- a/Documentation/devicetree/bindings/display/msm/gpu.txt
+++ b/Documentation/devicetree/bindings/display/msm/gpu.txt
@@ -1,23 +1,19 @@
 Qualcomm adreno/snapdragon GPU
 
 Required properties:
-- compatible: "qcom,adreno-3xx"
+- compatible: "qcom,adreno-XYZ.W", "qcom,adreno"
+    for example: "qcom,adreno-306.0", "qcom,adreno"
+  Note that you need to list the less specific "qcom,adreno" (since this
+  is what the device is matched on), in addition to the more specific
+  with the chip-id.
 - reg: Physical base address and length of the controller's registers.
 - interrupts: The interrupt signal from the gpu.
 - clocks: device clocks
   See ../clocks/clock-bindings.txt for details.
 - clock-names: the following clocks are required:
-  * "core_clk"
-  * "iface_clk"
-  * "mem_iface_clk"
-- qcom,chipid: gpu chip-id.  Note this may become optional for future
-  devices if we can reliably read the chipid from hw
-- qcom,gpu-pwrlevels: list of operating points
-  - compatible: "qcom,gpu-pwrlevels"
-  - for each qcom,gpu-pwrlevel:
-    - qcom,gpu-freq: requested gpu clock speed
-    - NOTE: downstream android driver defines additional parameters to
-      configure memory bandwidth scaling per OPP.
+  * "core"
+  * "iface"
+  * "mem_iface"
 
 Example:
 
@@ -25,28 +21,18 @@ Example:
 	...
 
 	gpu: qcom,kgsl-3d0@4300000 {
-		compatible = "qcom,adreno-3xx";
+		compatible = "qcom,adreno-320.2", "qcom,adreno";
 		reg = <0x04300000 0x20000>;
 		reg-names = "kgsl_3d0_reg_memory";
 		interrupts = <GIC_SPI 80 0>;
 		interrupt-names = "kgsl_3d0_irq";
 		clock-names =
-		    "core_clk",
-		    "iface_clk",
-		    "mem_iface_clk";
+		    "core",
+		    "iface",
+		    "mem_iface";
 		clocks =
 		    <&mmcc GFX3D_CLK>,
 		    <&mmcc GFX3D_AHB_CLK>,
 		    <&mmcc MMSS_IMEM_AHB_CLK>;
-		qcom,chipid = <0x03020100>;
-		qcom,gpu-pwrlevels {
-			compatible = "qcom,gpu-pwrlevels";
-			qcom,gpu-pwrlevel@0 {
-				qcom,gpu-freq = <450000000>;
-			};
-			qcom,gpu-pwrlevel@1 {
-				qcom,gpu-freq = <27000000>;
-			};
-		};
 	};
 };