diff options
author | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-06-20 05:39:34 +0200 |
---|---|---|
committer | Greg Kroah-Hartman <gregkh@linuxfoundation.org> | 2017-06-20 05:39:34 +0200 |
commit | 24040a58379e2f2fa6aa9466911b758073b6bdfa (patch) | |
tree | 772a93302d0e2e0f2aa333bb10a060e2e886c645 /Documentation/driver-api/usb | |
parent | Merge 4.12-rc6 into usb-next (diff) | |
parent | usb: gadget: add f_uac1 variant based on a new u_audio api (diff) | |
download | linux-24040a58379e2f2fa6aa9466911b758073b6bdfa.tar.xz linux-24040a58379e2f2fa6aa9466911b758073b6bdfa.zip |
Merge tag 'usb-for-v4.13' of git://git.kernel.org/pub/scm/linux/kernel/git/balbi/usb into usb-testing
Felipe writes:
usb: changes for v4.13 merge window
This time around we have a total of 57 non-merge commits. A list of
most important changes follows:
- Improvements to dwc3 tracing interface
- Initial dual-role support for dwc3
- Improvements to how we handle DMA resources in dwc3
- A new f_uac1 implementation which much more flexible
- Removal of AVR32 bits
- Improvements to f_mass_storage driver
Diffstat (limited to 'Documentation/driver-api/usb')
-rw-r--r-- | Documentation/driver-api/usb/dwc3.rst | 712 | ||||
-rw-r--r-- | Documentation/driver-api/usb/index.rst | 3 | ||||
-rw-r--r-- | Documentation/driver-api/usb/typec.rst | 182 | ||||
-rw-r--r-- | Documentation/driver-api/usb/usb3-debug-port.rst | 100 |
4 files changed, 997 insertions, 0 deletions
diff --git a/Documentation/driver-api/usb/dwc3.rst b/Documentation/driver-api/usb/dwc3.rst new file mode 100644 index 000000000000..c3dc84a50ce5 --- /dev/null +++ b/Documentation/driver-api/usb/dwc3.rst @@ -0,0 +1,712 @@ +=============================================================== +Synopsys DesignWare Core SuperSpeed USB 3.0 Controller +=============================================================== + +:Author: Felipe Balbi <felipe.balbi@linux.intel.com> +:Date: April 2017 + +Introduction +============ + +The *Synopsys DesignWare Core SuperSpeed USB 3.0 Controller* +(hereinafter referred to as *DWC3*) is a USB SuperSpeed compliant +controller which can be configured in one of 4 ways: + + 1. Peripheral-only configuration + 2. Host-only configuration + 3. Dual-Role configuration + 4. Hub configuration + +Linux currently supports several versions of this controller. In all +likelyhood, the version in your SoC is already supported. At the time +of this writing, known tested versions range from 2.02a to 3.10a. As a +rule of thumb, anything above 2.02a should work reliably well. + +Currently, we have many known users for this driver. In alphabetical +order: + + 1. Cavium + 2. Intel Corporation + 3. Qualcomm + 4. Rockchip + 5. ST + 6. Samsung + 7. Texas Instruments + 8. Xilinx + +Summary of Features +====================== + +For details about features supported by your version of DWC3, consult +your IP team and/or *Synopsys DesignWare Core SuperSpeed USB 3.0 +Controller Databook*. Following is a list of features supported by the +driver at the time of this writing: + + 1. Up to 16 bidirectional endpoints (including the control + pipe - ep0) + 2. Flexible endpoint configuration + 3. Simultaneous IN and OUT transfer support + 4. Scatter-list support + 5. Up to 256 TRBs [#trb]_ per endpoint + 6. Support for all transfer types (*Control*, *Bulk*, + *Interrupt*, and *Isochronous*) + 7. SuperSpeed Bulk Streams + 8. Link Power Management + 9. Trace Events for debugging + 10. DebugFS [#debugfs]_ interface + +These features have all been exercised with many of the **in-tree** +gadget drivers. We have verified both *ConfigFS* [#configfs]_ and +legacy gadget drivers. + +Driver Design +============== + +The DWC3 driver sits on the *drivers/usb/dwc3/* directory. All files +related to this driver are in this one directory. This makes it easy +for new-comers to read the code and understand how it behaves. + +Because of DWC3's configuration flexibility, the driver is a little +complex in some places but it should be rather straightforward to +understand. + +The biggest part of the driver refers to the Gadget API. + +Known Limitations +=================== + +Like any other HW, DWC3 has its own set of limitations. To avoid +constant questions about such problems, we decided to document them +here and have a single location to where we could point users. + +OUT Transfer Size Requirements +--------------------------------- + +According to Synopsys Databook, all OUT transfer TRBs [#trb]_ must +have their *size* field set to a value which is integer divisible by +the endpoint's *wMaxPacketSize*. This means that *e.g.* in order to +receive a Mass Storage *CBW* [#cbw]_, req->length must either be set +to a value that's divisible by *wMaxPacketSize* (1024 on SuperSpeed, +512 on HighSpeed, etc), or DWC3 driver must add a Chained TRB pointing +to a throw-away buffer for the remaining length. Without this, OUT +transfers will **NOT** start. + +Note that as of this writing, this won't be a problem because DWC3 is +fully capable of appending a chained TRB for the remaining length and +completely hide this detail from the gadget driver. It's still worth +mentioning because this seems to be the largest source of queries +about DWC3 and *non-working transfers*. + +TRB Ring Size Limitation +------------------------- + +We, currently, have a hard limit of 256 TRBs [#trb]_ per endpoint, +with the last TRB being a Link TRB [#link_trb]_ pointing back to the +first. This limit is arbitrary but it has the benefit of adding up to +exactly 4096 bytes, or 1 Page. + +DWC3 driver will try its best to cope with more than 255 requests and, +for the most part, it should work normally. However this is not +something that has been exercised very frequently. If you experience +any problems, see section **Reporting Bugs** below. + +Reporting Bugs +================ + +Whenever you encounter a problem with DWC3, first and foremost you +should make sure that: + + 1. You're running latest tag from `Linus' tree`_ + 2. You can reproduce the error without any out-of-tree changes + to DWC3 + 3. You have checked that it's not a fault on the host machine + +After all these are verified, then here's how to capture enough +information so we can be of any help to you. + +Required Information +--------------------- + +DWC3 relies exclusively on Trace Events for debugging. Everything is +exposed there, with some extra bits being exposed to DebugFS +[#debugfs]_. + +In order to capture DWC3's Trace Events you should run the following +commands **before** plugging the USB cable to a host machine: + +.. code-block:: sh + + # mkdir -p /d + # mkdir -p /t + # mount -t debugfs none /d + # mount -t tracefs none /t + # echo 81920 > /t/buffer_size_kb + # echo 1 > /t/events/dwc3/enable + +After this is done, you can connect your USB cable and reproduce the +problem. As soon as the fault is reproduced, make a copy of files +``trace`` and ``regdump``, like so: + +.. code-block:: sh + + # cp /t/trace /root/trace.txt + # cat /d/*dwc3*/regdump > /root/regdump.txt + +Make sure to compress ``trace.txt`` and ``regdump.txt`` in a tarball +and email it to `me`_ with `linux-usb`_ in Cc. If you want to be extra +sure that I'll help you, write your subject line in the following +format: + + **[BUG REPORT] usb: dwc3: Bug while doing XYZ** + +On the email body, make sure to detail what you doing, which gadget +driver you were using, how to reproduce the problem, what SoC you're +using, which OS (and its version) was running on the Host machine. + +With all this information, we should be able to understand what's +going on and be helpful to you. + +Debugging +=========== + +First and foremost a disclaimer:: + + DISCLAIMER: The information available on DebugFS and/or TraceFS can + change at any time at any Major Linux Kernel Release. If writing + scripts, do **NOT** assume information to be available in the + current format. + +With that out of the way, let's carry on. + +If you're willing to debug your own problem, you deserve a round of +applause :-) + +Anyway, there isn't much to say here other than Trace Events will be +really helpful in figuring out issues with DWC3. Also, access to +Synopsys Databook will be **really** valuable in this case. + +A USB Sniffer can be helpful at times but it's not entirely required, +there's a lot that can be understood without looking at the wire. + +Feel free to email `me`_ and Cc `linux-usb`_ if you need any help. + +``DebugFS`` +------------- + +``DebugFS`` is very good for gathering snapshots of what's going on +with DWC3 and/or any endpoint. + +On DWC3's ``DebugFS`` directory, you will find the following files and +directories: + +``ep[0..15]{in,out}/`` +``link_state`` +``regdump`` +``testmode`` + +``link_state`` +`````````````` + +When read, ``link_state`` will print out one of ``U0``, ``U1``, +``U2``, ``U3``, ``SS.Disabled``, ``RX.Detect``, ``SS.Inactive``, +``Polling``, ``Recovery``, ``Hot Reset``, ``Compliance``, +``Loopback``, ``Reset``, ``Resume`` or ``UNKNOWN link state``. + +This file can also be written to in order to force link to one of the +states above. + +``regdump`` +````````````` + +File name is self-explanatory. When read, ``regdump`` will print out a +register dump of DWC3. Note that this file can be grepped to find the +information you want. + +``testmode`` +`````````````` + +When read, ``testmode`` will print out a name of one of the specified +USB 2.0 Testmodes (``test_j``, ``test_k``, ``test_se0_nak``, +``test_packet``, ``test_force_enable``) or the string ``no test`` in +case no tests are currently being executed. + +In order to start any of these test modes, the same strings can be +written to the file and DWC3 will enter the requested test mode. + + +``ep[0..15]{in,out}`` +`````````````````````` + +For each endpoint we expose one directory following the naming +convention ``ep$num$dir`` *(ep0in, ep0out, ep1in, ...)*. Inside each +of these directories you will find the following files: + +``descriptor_fetch_queue`` +``event_queue`` +``rx_fifo_queue`` +``rx_info_queue`` +``rx_request_queue`` +``transfer_type`` +``trb_ring`` +``tx_fifo_queue`` +``tx_request_queue`` + +With access to Synopsys Databook, you can decode the information on +them. + +``transfer_type`` +~~~~~~~~~~~~~~~~~~ + +When read, ``transfer_type`` will print out one of ``control``, +``bulk``, ``interrupt`` or ``isochronous`` depending on what the +endpoint descriptor says. If the endpoint hasn't been enabled yet, it +will print ``--``. + +``trb_ring`` +~~~~~~~~~~~~~ + +When read, ``trb_ring`` will print out details about all TRBs on the +ring. It will also tell you where our enqueue and dequeue pointers are +located in the ring: + +.. code-block:: sh + + buffer_addr,size,type,ioc,isp_imi,csp,chn,lst,hwo + 000000002c754000,481,normal,1,0,1,0,0,0 + 000000002c75c000,481,normal,1,0,1,0,0,0 + 000000002c780000,481,normal,1,0,1,0,0,0 + 000000002c788000,481,normal,1,0,1,0,0,0 + 000000002c78c000,481,normal,1,0,1,0,0,0 + 000000002c754000,481,normal,1,0,1,0,0,0 + 000000002c75c000,481,normal,1,0,1,0,0,0 + 000000002c784000,481,normal,1,0,1,0,0,0 + 000000002c788000,481,normal,1,0,1,0,0,0 + 000000002c78c000,481,normal,1,0,1,0,0,0 + 000000002c790000,481,normal,1,0,1,0,0,0 + 000000002c758000,481,normal,1,0,1,0,0,0 + 000000002c780000,481,normal,1,0,1,0,0,0 + 000000002c788000,481,normal,1,0,1,0,0,0 + 000000002c790000,481,normal,1,0,1,0,0,0 + 000000002c758000,481,normal,1,0,1,0,0,0 + 000000002c780000,481,normal,1,0,1,0,0,0 + 000000002c784000,481,normal,1,0,1,0,0,0 + 000000002c788000,481,normal,1,0,1,0,0,0 + 000000002c78c000,481,normal,1,0,1,0,0,0 + 000000002c754000,481,normal,1,0,1,0,0,0 + 000000002c758000,481,normal,1,0,1,0,0,0 + 000000002c780000,481,normal,1,0,1,0,0,0 + 000000002c784000,481,normal,1,0,1,0,0,0 + 000000002c78c000,481,normal,1,0,1,0,0,0 + 000000002c790000,481,normal,1,0,1,0,0,0 + 000000002c758000,481,normal,1,0,1,0,0,0 + 000000002c780000,481,normal,1,0,1,0,0,0 + 000000002c788000,481,normal,1,0,1,0,0,0 + 000000002c790000,481,normal,1,0,1,0,0,0 + 000000002c758000,481,normal,1,0,1,0,0,0 + 000000002c780000,481,normal,1,0,1,0,0,0 + 000000002c788000,481,normal,1,0,1,0,0,0 + 000000002c790000,481,normal,1,0,1,0,0,0 + 000000002c758000,481,normal,1,0,1,0,0,0 + 000000002c780000,481,normal,1,0,1,0,0,0 + 000000002c788000,481,normal,1,0,1,0,0,0 + 000000002c790000,481,normal,1,0,1,0,0,0 + 000000002c758000,481,normal,1,0,1,0,0,0 + 000000002c780000,481,normal,1,0,1,0,0,0 + 000000002c788000,481,normal,1,0,1,0,0,0 + 000000002c790000,481,normal,1,0,1,0,0,0 + 000000002c758000,481,normal,1,0,1,0,0,0 + 000000002c780000,481,normal,1,0,1,0,0,0 + 000000002c788000,481,normal,1,0,1,0,0,0 + 000000002c790000,481,normal,1,0,1,0,0,0 + 000000002c758000,481,normal,1,0,1,0,0,0 + 000000002c780000,481,normal,1,0,1,0,0,0 + 000000002c788000,481,normal,1,0,1,0,0,0 + 000000002c790000,481,normal,1,0,1,0,0,0 + 000000002c758000,481,normal,1,0,1,0,0,0 + 000000002c780000,481,normal,1,0,1,0,0,0 + 000000002c788000,481,normal,1,0,1,0,0,0 + 000000002c790000,481,normal,1,0,1,0,0,0 + 000000002c758000,481,normal,1,0,1,0,0,0 + 000000002c780000,481,normal,1,0,1,0,0,0 + 000000002c78c000,481,normal,1,0,1,0,0,0 + 000000002c784000,481,normal,1,0,1,0,0,0 + 000000002c788000,481,normal,1,0,1,0,0,0 + 000000002c78c000,481,normal,1,0,1,0,0,0 + 000000002c754000,481,normal,1,0,1,0,0,0 + 000000002c758000,481,normal,1,0,1,0,0,0 + 000000002c780000,481,normal,1,0,1,0,0,0 + 000000002c788000,481,normal,1,0,1,0,0,0 + 000000002c790000,481,normal,1,0,1,0,0,0 + 000000002c758000,481,normal,1,0,1,0,0,0 + 000000002c780000,481,normal,1,0,1,0,0,0 + 000000002c758000,481,normal,1,0,1,0,0,0 + 000000002c780000,481,normal,1,0,1,0,0,0 + 000000002c78c000,481,normal,1,0,1,0,0,0 + 000000002c75c000,481,normal,1,0,1,0,0,0 + 000000002c78c000,481,normal,1,0,1,0,0,0 + 000000002c780000,481,normal,1,0,1,0,0,0 + 000000002c754000,481,normal,1,0,1,0,0,0 + 000000002c788000,481,normal,1,0,1,0,0,0 + 000000002c754000,481,normal,1,0,1,0,0,0 + 000000002c780000,481,normal,1,0,1,0,0,0 + 000000002c788000,481,normal,1,0,1,0,0,0 + 000000002c78c000,481,normal,1,0,1,0,0,0 + 000000002c790000,481,normal,1,0,1,0,0,0 + 000000002c754000,481,normal,1,0,1,0,0,0 + 000000002c758000,481,normal,1,0,1,0,0,0 + 000000002c75c000,481,normal,1,0,1,0,0,0 + 000000002c780000,481,normal,1,0,1,0,0,0 + 000000002c784000,481,normal,1,0,1,0,0,0 + 000000002c788000,481,normal,1,0,1,0,0,0 + 000000002c78c000,481,normal,1,0,1,0,0,0 + 000000002c790000,481,normal,1,0,1,0,0,0 + 000000002c754000,481,normal,1,0,1,0,0,0 + 000000002c758000,481,normal,1,0,1,0,0,0 + 000000002c75c000,512,normal,1,0,1,0,0,1 D + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 E + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 0000000000000000,0,UNKNOWN,0,0,0,0,0,0 + 00000000381ab000,0,link,0,0,0,0,0,1 + + +Trace Events +------------- + +DWC3 also provides several trace events which help us gathering +information about the behavior of the driver during runtime. + +In order to use these events, you must enable ``CONFIG_FTRACE`` in +your kernel config. + +For details about how enable DWC3 events, see section **Reporting +Bugs**. + +The following subsections will give details about each Event Class and +each Event defined by DWC3. + +MMIO +``````` + +It is sometimes useful to look at every MMIO access when looking for +bugs. Because of that, DWC3 offers two Trace Events (one for +dwc3_readl() and one for dwc3_writel()). ``TP_printk`` follows:: + + TP_printk("addr %p value %08x", __entry->base + __entry->offset, + __entry->value) + +Interrupt Events +```````````````` + +Every IRQ event can be logged and decoded into a human readable +string. Because every event will be different, we don't give an +example other than the ``TP_printk`` format used:: + + TP_printk("event (%08x): %s", __entry->event, + dwc3_decode_event(__entry->event, __entry->ep0state)) + +Control Request +````````````````` + +Every USB Control Request can be logged to the trace buffer. The +output format is:: + + TP_printk("%s", dwc3_decode_ctrl(__entry->bRequestType, + __entry->bRequest, __entry->wValue, + __entry->wIndex, __entry->wLength) + ) + +Note that Standard Control Requests will be decoded into +human-readable strings with their respective arguments. Class and +Vendor requests will be printed out a sequence of 8 bytes in hex +format. + +Lifetime of a ``struct usb_request`` +``````````````````````````````````````` + +The entire lifetime of a ``struct usb_request`` can be tracked on the +trace buffer. We have one event for each of allocation, free, +queueing, dequeueing, and giveback. Output format is:: + + TP_printk("%s: req %p length %u/%u %s%s%s ==> %d", + __get_str(name), __entry->req, __entry->actual, __entry->length, + __entry->zero ? "Z" : "z", + __entry->short_not_ok ? "S" : "s", + __entry->no_interrupt ? "i" : "I", + __entry->status + ) + +Generic Commands +```````````````````` + +We can log and decode every Generic Command with its completion +code. Format is:: + + TP_printk("cmd '%s' [%x] param %08x --> status: %s", + dwc3_gadget_generic_cmd_string(__entry->cmd), + __entry->cmd, __entry->param, + dwc3_gadget_generic_cmd_status_string(__entry->status) + ) + +Endpoint Commands +```````````````````` + +Endpoints commands can also be logged together with completion +code. Format is:: + + TP_printk("%s: cmd '%s' [%d] params %08x %08x %08x --> status: %s", + __get_str(name), dwc3_gadget_ep_cmd_string(__entry->cmd), + __entry->cmd, __entry->param0, + __entry->param1, __entry->param2, + dwc3_ep_cmd_status_string(__entry->cmd_status) + ) + +Lifetime of a ``TRB`` +`````````````````````` + +A ``TRB`` Lifetime is simple. We are either preparing a ``TRB`` or +completing it. With these two events, we can see how a ``TRB`` changes +over time. Format is:: + + TP_printk("%s: %d/%d trb %p buf %08x%08x size %s%d ctrl %08x (%c%c%c%c:%c%c:%s)", + __get_str(name), __entry->queued, __entry->allocated, + __entry->trb, __entry->bph, __entry->bpl, + ({char *s; + int pcm = ((__entry->size >> 24) & 3) + 1; + switch (__entry->type) { + case USB_ENDPOINT_XFER_INT: + case USB_ENDPOINT_XFER_ISOC: + switch (pcm) { + case 1: + s = "1x "; + break; + case 2: + s = "2x "; + break; + case 3: + s = "3x "; + break; + } + default: + s = ""; + } s; }), + DWC3_TRB_SIZE_LENGTH(__entry->size), __entry->ctrl, + __entry->ctrl & DWC3_TRB_CTRL_HWO ? 'H' : 'h', + __entry->ctrl & DWC3_TRB_CTRL_LST ? 'L' : 'l', + __entry->ctrl & DWC3_TRB_CTRL_CHN ? 'C' : 'c', + __entry->ctrl & DWC3_TRB_CTRL_CSP ? 'S' : 's', + __entry->ctrl & DWC3_TRB_CTRL_ISP_IMI ? 'S' : 's', + __entry->ctrl & DWC3_TRB_CTRL_IOC ? 'C' : 'c', + dwc3_trb_type_string(DWC3_TRBCTL_TYPE(__entry->ctrl)) + ) + +Lifetime of an Endpoint +``````````````````````` + +And endpoint's lifetime is summarized with enable and disable +operations, both of which can be traced. Format is:: + + TP_printk("%s: mps %d/%d streams %d burst %d ring %d/%d flags %c:%c%c%c%c%c:%c:%c", + __get_str(name), __entry->maxpacket, + __entry->maxpacket_limit, __entry->max_streams, + __entry->maxburst, __entry->trb_enqueue, + __entry->trb_dequeue, + __entry->flags & DWC3_EP_ENABLED ? 'E' : 'e', + __entry->flags & DWC3_EP_STALL ? 'S' : 's', + __entry->flags & DWC3_EP_WEDGE ? 'W' : 'w', + __entry->flags & DWC3_EP_BUSY ? 'B' : 'b', + __entry->flags & DWC3_EP_PENDING_REQUEST ? 'P' : 'p', + __entry->flags & DWC3_EP_MISSED_ISOC ? 'M' : 'm', + __entry->flags & DWC3_EP_END_TRANSFER_PENDING ? 'E' : 'e', + __entry->direction ? '<' : '>' + ) + + +Structures, Methods and Definitions +==================================== + +.. kernel-doc:: drivers/usb/dwc3/core.h + :doc: main data structures + :internal: + +.. kernel-doc:: drivers/usb/dwc3/gadget.h + :doc: gadget-only helpers + :internal: + +.. kernel-doc:: drivers/usb/dwc3/gadget.c + :doc: gadget-side implementation + :internal: + +.. kernel-doc:: drivers/usb/dwc3/core.c + :doc: core driver (probe, PM, etc) + :internal: + +.. [#trb] Transfer Request Block +.. [#link_trb] Transfer Request Block pointing to another Transfer + Request Block. +.. [#debugfs] The Debug File System +.. [#configfs] The Config File System +.. [#cbw] Command Block Wrapper +.. _Linus' tree: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/ +.. _me: felipe.balbi@linux.intel.com +.. _linux-usb: linux-usb@vger.kernel.org diff --git a/Documentation/driver-api/usb/index.rst b/Documentation/driver-api/usb/index.rst index 1bf64edc8c8a..8fe995a1ec94 100644 --- a/Documentation/driver-api/usb/index.rst +++ b/Documentation/driver-api/usb/index.rst @@ -16,7 +16,10 @@ Linux USB API persist error-codes writing_usb_driver + dwc3 writing_musb_glue_layer + typec + usb3-debug-port .. only:: subproject and html diff --git a/Documentation/driver-api/usb/typec.rst b/Documentation/driver-api/usb/typec.rst new file mode 100644 index 000000000000..8a7249f2ff04 --- /dev/null +++ b/Documentation/driver-api/usb/typec.rst @@ -0,0 +1,182 @@ + +USB Type-C connector class +========================== + +Introduction +------------ + +The typec class is meant for describing the USB Type-C ports in a system to the +user space in unified fashion. The class is designed to provide nothing else +except the user space interface implementation in hope that it can be utilized +on as many platforms as possible. + +The platforms are expected to register every USB Type-C port they have with the +class. In a normal case the registration will be done by a USB Type-C or PD PHY +driver, but it may be a driver for firmware interface such as UCSI, driver for +USB PD controller or even driver for Thunderbolt3 controller. This document +considers the component registering the USB Type-C ports with the class as "port +driver". + +On top of showing the capabilities, the class also offer user space control over +the roles and alternate modes of ports, partners and cable plugs when the port +driver is capable of supporting those features. + +The class provides an API for the port drivers described in this document. The +attributes are described in Documentation/ABI/testing/sysfs-class-typec. + +User space interface +-------------------- +Every port will be presented as its own device under /sys/class/typec/. The +first port will be named "port0", the second "port1" and so on. + +When connected, the partner will be presented also as its own device under +/sys/class/typec/. The parent of the partner device will always be the port it +is attached to. The partner attached to port "port0" will be named +"port0-partner". Full path to the device would be +/sys/class/typec/port0/port0-partner/. + +The cable and the two plugs on it may also be optionally presented as their own +devices under /sys/class/typec/. The cable attached to the port "port0" port +will be named port0-cable and the plug on the SOP Prime end (see USB Power +Delivery Specification ch. 2.4) will be named "port0-plug0" and on the SOP +Double Prime end "port0-plug1". The parent of a cable will always be the port, +and the parent of the cable plugs will always be the cable. + +If the port, partner or cable plug supports Alternate Modes, every supported +Alternate Mode SVID will have their own device describing them. Note that the +Alternate Mode devices will not be attached to the typec class. The parent of an +alternate mode will be the device that supports it, so for example an alternate +mode of port0-partner will be presented under /sys/class/typec/port0-partner/. +Every mode that is supported will have its own group under the Alternate Mode +device named "mode<index>", for example /sys/class/typec/port0/<alternate +mode>/mode1/. The requests for entering/exiting a mode can be done with "active" +attribute file in that group. + +Driver API +---------- + +Registering the ports +~~~~~~~~~~~~~~~~~~~~~ + +The port drivers will describe every Type-C port they control with struct +typec_capability data structure, and register them with the following API: + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_register_port typec_unregister_port + +When registering the ports, the prefer_role member in struct typec_capability +deserves special notice. If the port that is being registered does not have +initial role preference, which means the port does not execute Try.SNK or +Try.SRC by default, the member must have value TYPEC_NO_PREFERRED_ROLE. +Otherwise if the port executes Try.SNK by default, the member must have value +TYPEC_DEVICE, and with Try.SRC the value must be TYPEC_HOST. + +Registering Partners +~~~~~~~~~~~~~~~~~~~~ + +After successful connection of a partner, the port driver needs to register the +partner with the class. Details about the partner need to be described in struct +typec_partner_desc. The class copies the details of the partner during +registration. The class offers the following API for registering/unregistering +partners. + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_register_partner typec_unregister_partner + +The class will provide a handle to struct typec_partner if the registration was +successful, or NULL. + +If the partner is USB Power Delivery capable, and the port driver is able to +show the result of Discover Identity command, the partner descriptor structure +should include handle to struct usb_pd_identity instance. The class will then +create a sysfs directory for the identity under the partner device. The result +of Discover Identity command can then be reported with the following API: + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_partner_set_identity + +Registering Cables +~~~~~~~~~~~~~~~~~~ + +After successful connection of a cable that supports USB Power Delivery +Structured VDM "Discover Identity", the port driver needs to register the cable +and one or two plugs, depending if there is CC Double Prime controller present +in the cable or not. So a cable capable of SOP Prime communication, but not SOP +Double Prime communication, should only have one plug registered. For more +information about SOP communication, please read chapter about it from the +latest USB Power Delivery specification. + +The plugs are represented as their own devices. The cable is registered first, +followed by registration of the cable plugs. The cable will be the parent device +for the plugs. Details about the cable need to be described in struct +typec_cable_desc and about a plug in struct typec_plug_desc. The class copies +the details during registration. The class offers the following API for +registering/unregistering cables and their plugs: + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_register_cable typec_unregister_cable typec_register_plug typec_unregister_plug + +The class will provide a handle to struct typec_cable and struct typec_plug if +the registration is successful, or NULL if it isn't. + +If the cable is USB Power Delivery capable, and the port driver is able to show +the result of Discover Identity command, the cable descriptor structure should +include handle to struct usb_pd_identity instance. The class will then create a +sysfs directory for the identity under the cable device. The result of Discover +Identity command can then be reported with the following API: + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_cable_set_identity + +Notifications +~~~~~~~~~~~~~ + +When the partner has executed a role change, or when the default roles change +during connection of a partner or cable, the port driver must use the following +APIs to report it to the class: + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_set_data_role typec_set_pwr_role typec_set_vconn_role typec_set_pwr_opmode + +Alternate Modes +~~~~~~~~~~~~~~~ + +USB Type-C ports, partners and cable plugs may support Alternate Modes. Each +Alternate Mode will have identifier called SVID, which is either a Standard ID +given by USB-IF or vendor ID, and each supported SVID can have 1 - 6 modes. The +class provides struct typec_mode_desc for describing individual mode of a SVID, +and struct typec_altmode_desc which is a container for all the supported modes. + +Ports that support Alternate Modes need to register each SVID they support with +the following API: + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_port_register_altmode + +If a partner or cable plug provides a list of SVIDs as response to USB Power +Delivery Structured VDM Discover SVIDs message, each SVID needs to be +registered. + +API for the partners: + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_partner_register_altmode + +API for the Cable Plugs: + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_plug_register_altmode + +So ports, partners and cable plugs will register the alternate modes with their +own functions, but the registration will always return a handle to struct +typec_altmode on success, or NULL. The unregistration will happen with the same +function: + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_unregister_altmode + +If a partner or cable plug enters or exits a mode, the port driver needs to +notify the class with the following API: + +.. kernel-doc:: drivers/usb/typec/typec.c + :functions: typec_altmode_update_active diff --git a/Documentation/driver-api/usb/usb3-debug-port.rst b/Documentation/driver-api/usb/usb3-debug-port.rst new file mode 100644 index 000000000000..feb1a36a65b7 --- /dev/null +++ b/Documentation/driver-api/usb/usb3-debug-port.rst @@ -0,0 +1,100 @@ +=============== +USB3 debug port +=============== + +:Author: Lu Baolu <baolu.lu@linux.intel.com> +:Date: March 2017 + +GENERAL +======= + +This is a HOWTO for using the USB3 debug port on x86 systems. + +Before using any kernel debugging functionality based on USB3 +debug port, you need to:: + + 1) check whether any USB3 debug port is available in + your system; + 2) check which port is used for debugging purposes; + 3) have a USB 3.0 super-speed A-to-A debugging cable. + +INTRODUCTION +============ + +The xHCI debug capability (DbC) is an optional but standalone +functionality provided by the xHCI host controller. The xHCI +specification describes DbC in the section 7.6. + +When DbC is initialized and enabled, it will present a debug +device through the debug port (normally the first USB3 +super-speed port). The debug device is fully compliant with +the USB framework and provides the equivalent of a very high +performance full-duplex serial link between the debug target +(the system under debugging) and a debug host. + +EARLY PRINTK +============ + +DbC has been designed to log early printk messages. One use for +this feature is kernel debugging. For example, when your machine +crashes very early before the regular console code is initialized. +Other uses include simpler, lockless logging instead of a full- +blown printk console driver and klogd. + +On the debug target system, you need to customize a debugging +kernel with CONFIG_EARLY_PRINTK_USB_XDBC enabled. And, add below +kernel boot parameter:: + + "earlyprintk=xdbc" + +If there are multiple xHCI controllers in your system, you can +append a host contoller index to this kernel parameter. This +index starts from 0. + +Current design doesn't support DbC runtime suspend/resume. As +the result, you'd better disable runtime power management for +USB subsystem by adding below kernel boot parameter:: + + "usbcore.autosuspend=-1" + +Before starting the debug target, you should connect the debug +port to a USB port (root port or port of any external hub) on +the debug host. The cable used to connect these two ports +should be a USB 3.0 super-speed A-to-A debugging cable. + +During early boot of the debug target, DbC will be detected and +initialized. After initialization, the debug host should be able +to enumerate the debug device in debug target. The debug host +will then bind the debug device with the usb_debug driver module +and create the /dev/ttyUSB device. + +If the debug device enumeration goes smoothly, you should be able +to see below kernel messages on the debug host:: + + # tail -f /var/log/kern.log + [ 1815.983374] usb 4-3: new SuperSpeed USB device number 4 using xhci_hcd + [ 1815.999595] usb 4-3: LPM exit latency is zeroed, disabling LPM. + [ 1815.999899] usb 4-3: New USB device found, idVendor=1d6b, idProduct=0004 + [ 1815.999902] usb 4-3: New USB device strings: Mfr=1, Product=2, SerialNumber=3 + [ 1815.999903] usb 4-3: Product: Remote GDB + [ 1815.999904] usb 4-3: Manufacturer: Linux + [ 1815.999905] usb 4-3: SerialNumber: 0001 + [ 1816.000240] usb_debug 4-3:1.0: xhci_dbc converter detected + [ 1816.000360] usb 4-3: xhci_dbc converter now attached to ttyUSB0 + +You can use any communication program, for example minicom, to +read and view the messages. Below simple bash scripts can help +you to check the sanity of the setup. + +.. code-block:: sh + + ===== start of bash scripts ============= + #!/bin/bash + + while true ; do + while [ ! -d /sys/class/tty/ttyUSB0 ] ; do + : + done + cat /dev/ttyUSB0 + done + ===== end of bash scripts =============== |